Search Results

Search found 29093 results on 1164 pages for 'network interface'.

Page 244/1164 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• Could not connect to wireless unitl reboot (nl80211)

  - by user107410

  I'm using Samsung NP900X3C. I have problem with occasionally connecting to WIFI, with Ubuntu 12.10. Sometimes my computer could not connect to WIFI "blab", neither after reboot computer. Only solution is to restart WIFI hotspot. It's public WIFI, used by many users, that don't have that problem. My /var/log/syslog: Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.908610] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:39 k15 kernel: [ 8.915032] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.916753] wlan0: authenticated Nov 12 10:09:39 k15 kernel: [ 8.916839] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.386212] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.389114] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:42 k15 kernel: [ 12.391021] wlan0: authenticated Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:42 k15 kernel: [ 12.391332] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:46 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) and after restart WiFi, I could connect: Nov 12 10:11:51 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: inactive -> scanning Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 kernel: [ 144.445154] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.453994] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:11:55 k15 kernel: [ 144.455860] wlan0: authenticated Nov 12 10:11:55 k15 kernel: [ 144.458681] wlan0: associate with 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:11:55 k15 kernel: [ 144.462799] wlan0: RX AssocResp from 64:70:02:89:7c:d7 (capab=0x431 status=0 aid=9) Nov 12 10:11:55 k15 kernel: [ 144.486368] wlan0: associated Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Associated with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.487435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> associated Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake This problem is appearing regulary. My WiFi device control is nl80211. Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): using nl80211 for WiFi device control Nov 12 10:09:32 k15 NetworkManager[1004]: <warn> (wlan0): driver supports Access Point (AP) mode Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): now managed Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): bringing up device.

  Read the article

• Code refactoring with Visual Studio 2010 Part-4

  - by Jalpesh P. Vadgama

  I have been writing few post with code refactoring features in Visual Studio 2010. This post also will be part of series and this post will be last of the series. In this post I am going explain two features 1) Encapsulate Field and 2) Extract Interface. Let’s explore both features in details. Encapsulate Field: This is a nice code refactoring feature provides by Visual Studio 2010. With help of this feature we can create properties from the existing private field of the class. Let’s take a simple example of Customer Class. In that I there are two private field called firstName and lastName. Below is the code for the class. public class Customer { private string firstName; private string lastName; public string Address { get; set; } public string City { get; set; } } Now lets encapsulate first field firstName with Encapsulate feature. So first select that field and goto refactor menu in Visual Studio 2010 and click on Encapsulate Field. Once you click that a dialog box will appear like following. Now once you click OK a preview dialog box will open as we have selected preview reference changes. I think its a good options to check that option to preview code that is being changed by IDE itself. Dialog will look like following. Once you click apply it create a new property called FirstName. Same way I have done for the lastName and now my customer class code look like following. public class Customer { private string firstName; public string FirstName { get { return firstName; } set { firstName = value; } } private string lastName; public string LastName { get { return lastName; } set { lastName = value; } } public string Address { get; set; } public string City { get; set; } } So you can see that its very easy to create properties with existing fields and you don’t have to change anything there in code it will change all the stuff itself. Extract Interface: When you are writing software prototype and You don’t know the future implementation of that then its a good practice to use interface there. I am going to explain here that How we can extract interface from the existing code without writing a single line of code with the help of code refactoring feature of Visual Studio 2010. For that I have create a Simple Repository class called CustomerRepository with three methods like following. public class CustomerRespository { public void Add() { // Some code to add customer } public void Update() { //some code to update customer } public void Delete() { //some code delete customer } } In above class there are three method Add,Update and Delete where we are going to implement some code for each one. Now I want to create a interface which I can use for my other entities in project. So let’s create a interface from the above class with the help of Visual Studio 2010. So first select class and goto refactor menu and click Extract Interface. It will open up dialog box like following. Here I have selected all the method for interface and Once I click OK then it will create a new file called ICustomerRespository where it has created a interface. Just like following. Here is a code for that interface. using System; namespace CodeRefractoring { interface ICustomerRespository { void Add(); void Delete(); void Update(); } } Now let's see the code for the our class. It will also changed like following to implement the interface. public class CustomerRespository : ICustomerRespository { public void Add() { // Some code to add customer } public void Update() { //some code to update customer } public void Delete() { //some code delete customer } } Isn't that great we have created a interface and implemented it without writing a single line of code. Hope you liked it. Stay tuned for more.. Till that Happy Programming.

  Read the article

• How can i call method from class but this method implamented from any interface?

  - by Phsika

  i try to call base.Alan(); in HacimBul. But base. dont give intellisense alan method public double HacimBul() { throw new Exception(); //return base..... -- how can i see base.Alan(); } namespace interfaceClass { class Program { static void Main(string[] args) { } } interface Ikenar { double kenar { get; set; } } interface Iyukseklik { double yuksekli {get; set;} } interface IAlan { double Alan(); } interface IHacim { double Hacim(); } class Alan : Ikenar, IAlan { public double kenar { get; set; } double IAlan.Alan() { return kenar * kenar; } } class Hacim : Alan, Iyukseklik { public double kenar { get; set; } public double yuksekli { get; set; } public double HacimBul() { throw new Exception(); //return base..... -- how can i see base.Alan(); } } }

  Read the article

• How can i call method from class but this method implemented from any interface?

  - by Phsika

  i try to call base.Alan(); in HacimBul. But base. dont give intellisense alan method public double HacimBul() { throw new Exception(); //return base..... -- how can i see base.Alan(); } namespace interfaceClass { class Program { static void Main(string[] args) { } } interface Ikenar { double kenar { get; set; } } interface Iyukseklik { double yuksekli {get; set;} } interface IAlan { double Alan(); } interface IHacim { double Hacim(); } class Alan : Ikenar, IAlan { public double kenar { get; set; } double IAlan.Alan() { return kenar * kenar; } } class Hacim : Alan, Iyukseklik { public double kenar { get; set; } public double yuksekli { get; set; } public double HacimBul() { throw new Exception(); //return base..... -- how can i see base.Alan(); } } }

  Read the article

• What's the correct way to pass parameters from VBScript to COM interface implemented in C#?

  - by nopopem

  I'm trying to expose a fairly simple C# class to COM which should be usable from VBScript (among others). Some objects need to be created via COM calls and will be used in furter calls later on. The definition of the exposed classes and interfaces looks like this: namespace Test { [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)] public interface IComInterface { IFoo CreateFoo(); void UseFoo(int x, IFoo f); } [ClassInterface(ClassInterfaceType.None)] public sealed class CComInterface : IComInterface { public CComInterface() {} public IFoo CreateFoo() { return new Foo(); } public void UseFoo(int x, IFoo f) { f.Bar(); } } [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)] public interface IFoo { void Bar(); } [ClassInterface(ClassInterfaceType.None)] public class Foo : IFoo { internal Foo() {} public void Bar() {} } } The simplest thinkable COM client in VBScript does this: Dim ci Set ci = WScript.CreateObject("Test.CComInterface") Dim foo Set foo = ci.CreateFoo foo.Bar ci.UseFoo 0, foo While the call to Bar succeeds, calling UseFoo fails with "Error 5: invalid procedure call or invalid argument" The generated IDL seems ok to me: dispinterface IComInterface { properties: methods: [id(0x60020003)] IFoo* CreateFoo(); [id(0x60020004)] void UseFoo( [in] long x, [in] IFoo* f); }; The vbs call succeeds when I wrap the second parameter in parentheses like this: ci.UseFoo 0, (foo) As far as I understand (I'm no VBScript expert however) this forces the reference to foo to be passed by value, i.e. a copy of the reference is being made. How can I change the interface so that it can be called with the foo reference directly? Since this will be a public interface used by customers I don't like the idea of having to explain why all the objects created need to be passed back in an extra pair of parentheses...

  Read the article

• Cisco ASA 5510 ASDM: Setting up multiple public static ip addresses on a single interface and route

  - by ssjaken

  HI, i have a cisco ASA 5510 using ASDM version 6.3 We have a webserver that is been written very specifically and i was given super direct "DO NOT DEVIATE" directions. This server has to get traffic from 3 different PUBLIC ip's that we own. (our isp gave use a block of 12 static addresses) on 4 different ports. there are the directions i was given externalIP1:22 - 172.17.5.50:22 - SSH externalIP1:443 - 172.17.5.50:23040 - SIT externalIP2:443 - 172.17.5.50:33040 - STAGE externalIP3:443 - 172.17.5.50:43040 - PROD My first question is, using ASDM (my contract employer demands i use ASDM over CLI) how do i get three public addresses to work on one interface. We are authenticating on PPPoE. I know create a virtual interface with the static address but when i do i cannot ping the address from another offsite machine. secondly, where would i put the traffic redirect in. would i go ahead and create ACL's or just make NAT routes. Thanks.

  Read the article

• Why does only "network" appear in Startup Disks on my Mac?

  - by nbolton

  I have a Linux dual boot setup with my Mac (with Leopard). When I open System Preferences Startup Disk I only see "Network Startup" and no HDD or BOOTCAMP as expected. So now, annoyingly, because "Network Startup" is the only option, it tries to start using the network (the flashing globe) for a short while rather than booting directly into Mac OS X. Is there a way to either fix Startup Disk or manually hack this?

  Read the article

• Cisco ASA 5505 site to site IPSEC VPN won't route from multiple LANs

  - by franklundy

  Hi I've set up a standard site to site VPN between 2 ASA 5505s (using the wizard in ASDM) and have the VPN working fine for traffic between Site A and Site B on the directly connected LANs. But this VPN is actually to be used for data originating on LAN subnets that are one hop away from the directly connected LANs. So actually there is another router connected to each ASA (LAN side) that then route to two completely different LAN ranges, where the clients and servers reside. At the moment, any traffic that gets to the ASA that has not originated from the directly connected LAN gets sent straight to the default gateway, and not through the VPN. I've tried adding the additional subnets to the "Protected Networks" on the VPN, but that has no effect. I have also tried adding a static route to each ASA trying to point the traffic to the other side, but again this hasn't worked. Here is the config for one of the sites. This works for traffic to/from the 192.168.144.x subnets perfectly. What I need is to be able to route traffic from 10.1.0.0/24 to 10.2.0.0/24 for example. ASA Version 8.0(3) ! hostname Site1 enable password ** encrypted names name 192.168.144.4 Site2 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.144.2 255.255.255.252 ! interface Vlan2 nameif outside security-level 0 ip address 10.78.254.70 255.255.255.252 (this is a private WAN circuit) ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ** encrypted ftp mode passive access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_1_cryptomap extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 access-list inside_nat0_outbound extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-603.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 10.78.254.69 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy aaa authentication ssh console LOCAL http server enable http 0.0.0.0 0.0.0.0 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer 10.78.254.66 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal telnet timeout 5 ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list group-policy DfltGrpPolicy attributes vpn-idle-timeout none username enadmin password * encrypted privilege 15 tunnel-group 10.78.254.66 type ipsec-l2l tunnel-group 10.78.254.66 ipsec-attributes pre-shared-key * ! ! prompt hostname context

  Read the article

• Should I remove all unmanged switches from my network?

  - by IMAbev

  I have a office network with approx 150 devices (computers/printers/ip phones). Almost all of the end point devices have straight run Cat5e from my Hp switches directly to the device. IP phones for each end user sit between the hp switch and computer. (hp switch - in to phone out of phone in to computer) While I have gotten rid of most of them, I still have a couple linksys unmanaged switches that split off to 2 or more devices. I have heard various reasons for removing these switches but not entirely sure if it actually degrades the network. I agree that eliminating these switches certainly cleans up the network from a management standpoint. Are these unmanaged switches bad for my network? Is there a clear advantage to having 'home run' cable runs to each of my end point devices?

  Read the article

• How do I protect a low budget network from rogue DHCP servers?

  - by Kenned

  I am helping a friend manage a shared internet connection in an apartment buildling with 80 apartments - 8 stairways with 10 apartments in each. The network is laid out with the internet router at one end of the building, connected to a cheap non-managed 16 port switch in the first stairway where the first 10 apartments are also connected. One port is connected to another 16 port cheapo switch in the next stairway, where those 10 apartments are connected, and so forth. Sort of a daisy chain of switches, with 10 apartments as spokes on each "daisy". The building is a U-shape, approximately 50 x 50 meters, 20 meters high - so from the router to the farthest apartment it’s probably around 200 meters including up-and-down stairways. We have a fair bit of problems with people hooking up wifi-routers the wrong way, creating rogue DHCP servers which interrupt large groups of the users and we wish to solve this problem by making the network smarter (instead of doing a physical unplugging binary search). With my limited networking skills, I see two ways - DHCP-snooping or splitting the entire network into separate VLANS for each apartment. Separate VLANS gives each apartment their own private connection to the router, while DHCP snooping will still allow LAN gaming and file sharing. Will DHCP snooping work with this kind of network topology, or does that rely on the network being in a proper hub-and-spoke-configuration? I am not sure if there are different levels of DHCP snooping - say like expensive Cisco switches will do anything, but inexpensive ones like TP-Link, D-Link or Netgear will only do it in certain topologies? And will basic VLAN support be good enough for this topology? I guess even cheap managed switches can tag traffic from each port with it’s own VLAN tag, but when the next switch in the daisy chain receives the packet on it’s “downlink” port, wouldn’t it strip or replace the VLAN tag with it’s own trunk-tag (or whatever the name is for the backbone traffic). Money is tight, and I don’t think we can afford professional grade Cisco (I have been campaigning for this for years), so I’d love some advice on which solution has the best support on low-end network equipment and if there are some specific models that are recommended? For instance low-end HP switches or even budget brands like TP-Link, D-Link etc. If I have overlooked another way to solve this problem it is due to my lack of knowledge. :)

  Read the article

• Why does a wired network slow down with user increase?

  - by Ed Briscoe

  If you had a wired network, 20 PCs hooked up to a 100 Mbit/sec switch (same onboard ethernet port speed) and you were just sending some test data round. What is the technical explanation as to why 20 machines sending test data around this network to each other is slower than one to one? I mean I know a busy network means it's slower but I'm really trying to understand some more technical details. Thanks for any help

  Read the article

• Esx servers in a DMZ

  - by James

  I have two ESX 3.5 servers in a DMZ. I can access these servers on any port from my lan via a VPN. Servers in the DMZ are unable to initiate connections back to the lan, for obvious reasons. I have a vCenter server on my lan and can initially connect to the esx servers fine. However the esx servers then try to send a hearth beat back to the vCenter server on udp/902 obviously this will not get back to the vCenter server, which then marks the ESX servers as not responding and disconnects. There are two broad solutions I can think of; 1) Try to tell vCenter to ignore not getting heart beats. The best I can do here is delay the disconnect by 3 mins. 2) Try some clever network solution. However again I am at loss. Note: The vCenter server is on a lan, and cannot be given a public IP, so firewall rules back will not work. And also I cannot setup a VPN from the DMZ to the lan. **I am adding the following, explanation that I added to the comments Ok maybe this is the bit that I not explaining well. The DMZ is on a remote site, an entirely independent network (network 1). The vCenter server is on our office lan (network 2). Network 2 can connect to any machine on any port on network 1. But network 1 is not allowed to initiate a connection to network 2. Any traffic destined to network 2 from network 1 gets dropped by the firewall as it is traffic to a non-routable address. The only solution I can think of is setting up a VPN from network 1 to network 2, but this is not acceptable So any clever folk out there any ideas? J

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS. [migrated]

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

• How do I configure custom routes when an interface is configured?

  - by ManicDee

  Other Superuser questions have addressed the issue of adding custom routes to access e.g.: multiple networks of a corporate network through one interface, while accessing the Internet through another interface. So assuming that I have a script to add specific routes when en0 is configured, and a separate script to add specific routes when en1 is configured, is there some way I can trigger those scripts to run automatically when Mac OS X/Darwin starts and configures those interfaces? Back in my Linux days, it was possible to add an option in /etc/network/interfaces along the lines of: iface eth0 inet dhcp up /usr/local/sbin/eth0-routes-up Is there something similar for Mac OS X?

  Read the article

• If a managed network switch were to overheat, would you consider it no longer reliable?

  - by Scott Szretter

  Here is the scenario - I have a network switch, one of several in a stack. It's fan failed. Soon, there were reports of users with network issues. After quickly replacing the fan, the users were fine, network issues were resolved. I assume the unit was overheating, and thus failing somehow. Today someone suggested to me, that I should not assume the unit is 100% reliable anymore. So what do you think, would an overheat condition (less than 1 day with the fan stopped) potentially cause permanent damage that could at some point come to the surface as future network failures/issues? If it matters, we are talking managed switches such as 3Com/HP SuperStack , ProCurve or PWR-Plus.

  Read the article

• How to selectively route network traffic through VPN on Mac OSX Leopard?

  - by newtonapple

  I don't want to send all my network traffic down to VPN when I'm connected to my company's network (via VPN) from home. For example, when I'm working from home, I would like to be able to backup my all files to the Time Capsule at home and still be able to access the company's internal network. I'm using Leopard's built-in VPN client. I've tried unchecking "Send all traffic over VPN connection." If I do that I will lose access to my company's internal websites be it via curl or the web browser (though internal IPs are still reachable). It'd be ideal if I can selectively choose a set of IPs or domains to be routed through VPN and keep the rest on my own network. Is this achievable with Leopard's built-in VPN client? If you have any software recommendations, I'd like to hear them as well.

  Read the article

• Troubleshooting loss of network connectivity in Windows 2003 - What else to check?

  - by Benny

  We are facing a weird problem in our data center. Our Backup server (running EMC Networker) loses network connection every alternate day around 3:00 AM (Backup schedule starts at midnight). After 2 hours of outage, the network connectivity recovers automatically and back to normal. What we observed: It is unlikely to be network issue, since it is directly connected to server farm switch (layer 2 connection without any intermediate hops). Further, the server is connected to two different switches for Load balancing using Broadcomm Teaming. a) If it were a switch related issue it is unlikely that both the network ports go down, since they are connected to different switch. b) A possibility Vlan wide issue is also ruled out since other devices in the same Vlan are fine. c) Switch interface status is always up. But there are lot of packet drops during the outage period - Can be attributed to high interface utilization of the backup server (near 100%) d) Connectivity is restored without any change on network. Next suspect is resource utilization on Windows server. Both CPU and Memory have rarely exceeded 80%, but NIC card utilization is alarmingly high (near 100%) Not really sure how to investigate this?

  Read the article

• Cisco ASA 8.2 ACL For NAT

  - by javano

  Sadly I have gone back in time to ASA 8.2(5)33 which I am not so familiar with. I have configured NAT between two interfaces but traffic isn't passing becasue I can't get the ACL to work; (The full config which isn't very big is here but to keep this post tidy I have just pasted the important parts below); interface Ethernet0/0 switchport access vlan 108 ! interface Ethernet0/6 switchport access vlan 104 ! interface Ethernet0/7 switchport access vlan 105 ! interface Vlan104 description BUILDING2 nameif BUILDING2 security-level 0 ip address 10.104.0.1 255.255.255.0 ! interface Vlan105 description BUILDING1 nameif BUILDING1 security-level 0 ip address 10.105.0.1 255.255.255.0 ! interface Vlan108 description Main LAN VLAN nameif lan security-level 0 ip address 172.22.0.215 255.255.255.0 ! object-group network obj_net_Remote_Hosts network-object host 111.111.111.3 network-object host 111.111.111.65 object-group network obj_host_pc1_eth1 network-object host 10.104.0.111 object-group network obj_host_pc2_eth1 network-object host 10.104.0.112 object-group network obj_host_pc3_eth1 network-object host 10.104.0.106 object-group network obj_host_pc4_eth1 network-object host 10.104.0.107 object-group network obj_net_PCs description IPs of PCs group-object obj_host_pc1_eth1 group-object obj_host_pc2_eth1 group-object obj_host_pc3_eth1 group-object obj_host_pc4_eth1 access-list acl_NAT_pc1_91 extended permit tcp host 10.104.0.111 host 111.111.111.3 eq 8101 access-list acl_Permit_PCs extended permit tcp object-group obj_net_PCs object-group obj_net_Remote_Hosts eq 8101 ! global (BUILDING1) 11 111.111.222.91 netmask 255.255.255.255 nat (BUILDING2) 11 access-list acl_NAT_pc1_91 access-group acl_Permit_PCs in interface BUILDING2 route BUILDING1 111.111.111.3 255.255.255.255 10.105.0.2 1 route BUILDING1 111.111.111.65 255.255.255.255 10.105.0.2 1 When I try and connect from PC1 to ip 111.111.111.3 I see the following error logged on the ASA console; %ASA-2-106001: Inbound TCP connection denied from 10.104.0.111/38495 to 111.111.111.3/8101 flags SYN on interface blades What the duce!

  Read the article

• How to selectively route network traffic through VPN on Mac OS X Leopard?

  - by newtonapple

  I don't want to send all my network traffic down to VPN when I'm connected to my company's network (via VPN) from home. For example, when I'm working from home, I would like to be able to backup my all files to the Time Capsule at home and still be able to access the company's internal network. I'm using Leopard's built-in VPN client. I've tried unchecking "Send all traffic over VPN connection." If I do that I will lose access to my company's internal websites be it via curl or the web browser (though internal IPs are still reachable). It'd be ideal if I can selectively choose a set of IPs or domains to be routed through VPN and keep the rest on my own network. Is this achievable with Leopard's built-in VPN client? If you have any software recommendations, I'd like to hear them as well.

  Read the article

• Is it possible to write C# code as below and send email using network in different country?

  - by kedar karthik

  Is it possible to write C# code as below and send email using mnetwork in different country? MSExchangeWebServiceURL = mail.something.com/ews/exchange.asmx its a web service URL ... sorry to correct my self //....this works great when i run the same code from home network, my friends home network ... anywhere around ... but when i run it from my clients location in columbia ... it fails I have a valid user name and password on that exchange server. Is there any configuration that I can set to achieve this? BTW this code below works when I run it within office network and any network within any home network ... i have tried atleast 5 friends network in Plano, Texas. I want this code to work when run from any network in another country. My client in columbia can connect to web service using a browser .. use the same user name and password ..... but when i run the code above ... it is not able to connect to our web service .... String cMSExchangeWebServiceURL = (String)System.Configuration.ConfigurationSettings.AppSettings["MSExchangeWebServiceURL"]; String cEmail = (String)System.Configuration.ConfigurationSettings.AppSettings["Cemail"]; String cPassword = (String)System.Configuration.ConfigurationSettings.AppSettings["Cpassword"]; String cTo = (String)System.Configuration.ConfigurationSettings.AppSettings["CTo"]; ExchangeServiceBinding esb = new ExchangeServiceBinding(); esb.Timeout = 1800000; esb.AllowAutoRedirect = true; esb.UseDefaultCredentials = false; esb.Credentials = new NetworkCredential(cEmail, cPassword); esb.Url = cMSExchangeWebServiceURL; ServicePointManager.ServerCertificateValidationCallback += delegate(object sender1, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; }; // Create a CreateItem request object CreateItemType request = new CreateItemType(); // Setup the request: // Indicate that we only want to send the message. No copy will be saved. request.MessageDisposition = MessageDispositionType.SendOnly; request.MessageDispositionSpecified = true; // Create a message object and set its properties MessageType message = new MessageType(); message.Subject = subject; message.Body = new TestOutgoingEmailServer.com.cogniti.mail1.BodyType(); message.Body.BodyType1 = BodyTypeType.HTML; message.Body.Value = body; message.ToRecipients = new EmailAddressType[3]; message.ToRecipients[0] = new EmailAddressType(); //message.ToRecipients[1] = new EmailAddressType(); //message.ToRecipients[2] = new EmailAddressType(); message.ToRecipients[0].EmailAddress = "[email protected]"; message.ToRecipients[0].RoutingType = "SMTP"; //message.CcRecipients = new EmailAddressType[1]; //message.CcRecipients[0] = new EmailAddressType(); //message.CcRecipients[0].EmailAddress = toEmailAddress.ElementAt(1).ToString(); //message.CcRecipients[0].RoutingType = "SMTP"; //There are some more properties in MessageType object //you can set all according to your requirement // Construct the array of items to send request.Items = new NonEmptyArrayOfAllItemsType(); request.Items.Items = new ItemType[1]; request.Items.Items[0] = message; // Call the CreateItem EWS method. CreateItemResponseType response = esb.CreateItem(request);

  Read the article

• How to statically configure DNS servers on a Cisco router when the WAN interface uses DHCP?

  - by Massimo

  I have a Cisco router (model 887VA, IOS 15.4) used to connect a LAN to the Internet via ADSL. The WAN interface uses DHCP: interface ATM0.1 point-to-point ip address dhcp I need the router to use a statically-defined DNS server for name resolution: ip name-server A.B.C.D However, the router insists on using the DNS servers supplied by the ISP via DHCP: Router#ping www.google.com Translating "www.google.com"...domain server (<ISP DNS>) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 173.194.116.208, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms How can I tell the router to ignore the ISP-supplied DNS servers and only use the statically-configured one?

  Read the article

• How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface?

  - by JJarava

  This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

  Read the article

• how to create a 802.11n wireless network between laptops and asus n-13 wireless adapter ?

  - by xpugur

  I have a asus usb n-13 wireless adapter and 3 laptops in a home we try to create a network witn 802.11n standards but failed each time laptops have intel 5100 agn. We try to create network with wpa-2 personal encryption that also fails(couldn't connect) but with wep encryption connects but with 802.11g standard... so do you know how to create a 802.11N based network? ... thank you...

  Read the article

• Do all the network cards use the same frequency to send signals to wire?

  - by smwikipedia

  I am comparing my cable TV wire to my network wire. In a TV cable wire, different frequencies are used by different TV channels. And since a certain channel use a fixed frequency, I think the only left way to represent different signal is with the carrier wave's amplitude. But what about the network wire? For all the network cards with the same type, do they also use different frequencies to send signals just like TV cable? I vaguely remember that they use frequency adjustment to represent signals. So the frequency should not be a fixed one. So how did all the network cards that sharing the same medium differentiate their own signal from others?

  Read the article

• Any way to map WebDAV with SSL as network drive in Windows XP?

  - by Shadow

  I'm trying to map WebDAV with SSL as a network drive in Windows XP. (I've been at this for several hours) I can read the share just fine using a browser and with Network Places, but it refuses to mount as a network drive. I've tried it using the Windows explorer interface and net use. Net use with the \\server@ssl:443\webdav method gives System error 53. https://server/webdav gives error 67. Any help would be appreciated.

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >