Search Results

Search found 48319 results on 1933 pages for 'system partition'.

Page 240/1933 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

  • Power cycles on/off 3 times before booting properly from cold start, no other issues (New System)

    - by James
    Relevant Specs: Sapphire 5850, core i7 920, Seasonic x750 power supply, ECS X58B-A2 mobo. From a cold boot, meaning all power totally disconnected at the wall, the system will power on for less than a second and then power off completely. After two seconds of being powered off this will repeat and on the third "attempt" the computer will boot. To be very specific here is what happens: The power is turned on at the wall and on the psu, the orange stdby LED on the mobo is illuminated but the system is 'off'. I hit the power button on the case or on the mobo itself I hear the relay (?) in the psu closing The case light comes on and the mobo power light comes on. The fans start rotating. Immediately after this the I hear some relay click - the power lights extinguish, the fans stop, the stdby light remains on. Less than 2 seconds pass and the cycle repeats without any intervention from me. On the third attempt it boots normally and the machine runs perfectly. If I do a soft reboot or a full shutdown the computer starts normally the next time. It's only if I pull the power cord or flick the switch off on the PSU that I get the cycling again. Basically any time the stdby light on the mobo goes out. I have removed the graphics card and I get the same problem. I have removed the PSU, hotwired it to the ON position and verified voltages on all lines. The relay does not cycle when I do this. If I connect only the 24 pin ATX connector to the mobo and not the 8 pin ATX12V / CPU connector then I will not get the cycling, the fans run, the power light stays on, but obviously the system can't boot. Disconnecting all fans has no effect on the problem. My feeling it that it's something to do with the motherboard like a capacitor that's taking a long time to charge because it's leaking or something along those lines. But I can't imagine what could be 'wrong' with it and only manifest itself as a problem under these very specific circumstances. Any ideas? Thanks.

    Read the article

  • Real server, Multiple IP Addresses, HyperV Virtual Server, How to partition IPs across real and Virtual NICs

    - by Steven_W
    This is a slightly difficult problem to explain without same basic background information - I'll try and refine the question later as necessary Originally, I have a single hosted server (Win 2008R2) with the following range of 8 IP addresses. - Single NIC - IP: x.x.128.72 -> x.x.128.79 - Subnet: x.x.255.192 - GW: x.x.128.65 After installing Hyper-V and setting up a single virtual server on the same box, I then wanted to assign one of the IP addresses to the virtual server, leaving everything else running normally. -- Firstly, I tried using the "External" network, but (even after setting IPs on the "Virtual Adapter" similar to Here but struggled to get networking running at all. I needed to keep the server running (otherwise I would have spent more time pursuing this approach) Q1 ... Was this a sensible thing to do ? Should I have carried on down this route ? -- I then decided to try different approach - Set the HyperV network to "Internal" (visible to Management OS) - Physical NIC - IP: x.x.128.72 -> x.x.128.75 - Subnet: x.x.255.192 - GW: x.x.128.65 - Virtual NIC - IP: x.x.128.78 - Subnet: x.x.255.252 - GW: x.x.128.72 ... { The same as the IP of the physical NIC ) - Virtual OS-NIC - IP: x.x.128.77 - Subnet: x.x.255.252 - GW: x.x.128.78 ... { The same as the IP of the host virtual-NIC ) -- Surprisingly enough, this approach actually worked, and I was able to connect from all the following: - Internet to/from physical NIC (x.x.128.72) - physical NIC (x.x.128.72) to virtual-OS-NIC (x.x.128.77) e.g. testing via ping + FTP - Internet to/from virtual-OS-NIC (x.x.128.72) -- The problem I have is that this approach seems to only last for a short while (a few hours). After this time, it seems that I lose the ability to connect from Virtual-OS-NIC to/from the internet (but I can still connect from the host-OS to the virtual-OS and from the host-OS to the internet) I have re-tested this a couple of times with the same results ... I leave the server on for a few hours (e.g. overnight), and when I come back in the morning, the Virtual-OS loses the ability to route to the internet -- I'm not quite sure what to look at next (or whether I'm going about this completely the wrong way ) One "possible relevant item" is that the host-OS is also running RRAS (Routing and Remote Access), but this is only to run a simple VPN -- Q2 - Wheat should I be looking at next ? (Any good references / recommendations of what to try) Would appreciate any thoughts or comments (even if you tell me I'm going about this the wrong way)

    Read the article

  • How can I recover a huge folder that's been converted to a zero kb file on an NTFS partition?

    - by aalaap
    I have a 1TB drive with two 500GB partitions. One of them is being used as a Mac OS X Time Machine back up drive and the other one was NTFS and being used for storage. I had my entire 'iTunes Music' folder stored on it. Recently, there were some errors on the NTFS drive that caused chkdsk to run when in Windows, and it removed a lot of corrupt files. In this process, it converted my 'iTunes Music' folder into one zero KB file. How can I recover this? The partitions are intact and the other data on the disk is still accessible. It's just the 'iTunes Music' folder that's gone.

    Read the article

  • Find and free disk space that is unused but unavailable (due to file system error, etc.)

    - by Voyagerfan5761
    Sometimes I get the feeling that if an app such as μTorrent allocates files on my FAT32-formatted flash drive, but then is killed or crashes (as happens more than a few times a month), that space just disappears from my file system. Whether or not that is the case, sometimes I do get a chill from wondering if I've lost hundreds of MB in available storage due to carelessness or malfunctions. Checking my disk with WinDirStat just makes it worse, because I see the huge "<Unknown>" item at the disk root staring at me, eating up well over a gigabyte. It might be FS inefficiency (due to 32 or 64kb sector/cluster size and a lot of tiny files) or it might be a glitch... Is there a tool I can download and run to check my file system and make sure that there aren't any unused allocated blocks on the disk? I want to make sure I'm not losing any disk space to I/O errors, etc.

    Read the article

  • Is it possible to run two servers in one system ?

    - by srikanth
    I have a small problem while trying to execute the wamp server. At present in my system I am running Apache server. I have a php application. for that I am trying to install wamp server in my system. wamp server is not running. I change the port no of wamp server as : in my C:\wamp\bin\apache\Apache2.2.11\conf\ I have httpd.conf file. in that I change listener and host name with another port no. then also it is not working.

    Read the article

  • Files not running and folder named C:\windows\restop found with system files in it on windows 98

    - by Max
    I have an old Windows 98 machine that I started using for some stuff a few days ago. Today I noticed that I can't run many system files, so I checked my system folder and I noticed that most of the files are gone. After doing a search for them I found them in a folder in C:\windows called "restop". I don't really feel comfortable restarting because all the files are moved. Does anyone know what might've caused this or if it's safe to restart? Is there some special way to move the files back?

    Read the article

  • Is it possible to run two servers in one system ?

    - by srikanth
    hi, i have a small problem while trying to execute the wamp server. At present in my system i am running Apache server. i have a php application. for that i am trying to install wamp server in my system. wamp server is not running. i change the port no of wamp server as : in my C:\wamp\bin\apache\Apache2.2.11\conf\ i have httpd.conf file. in that i change listener and host name with another port no. then also it is not working. any one can you help me......... plz...

    Read the article

  • How do I restore my system from a "Backup and Restore Center" backup?

    - by Daniel R Hicks
    The Windows (Vista) documentation and available online info is comprehensively vague. If I have a moderately brain dead system and want to restore it, and I have a "Backup and Restore Center" backup whose "delta" is not quite a week old (but with a "full backup" behind it), what steps do I go through to recover my box back to that backup point? It's totally unclear whether simply doing "restore all" from the (advanced) "Center" is sufficient, or do I need to first take the box back to day zero with the system restore DVD, et al? (Just editing this to get my correct ID associated with it.)

    Read the article

  • Is my Windows partition too far down on the disk?

    - by Trevor Alexander
    I have /boot/ on /dev/sda1 (1GB), followed by my Linux root LVM on /dev/sda2 (1.3GB). Finally, I installed Windows 7 on /dev/sda3 in the remaining 700GB of space. When I select Windows 7 in the grub menu, I get something like the following error and am thrown to grub4dos: find --set-root --ignore-floppies --ignore-cd /bootmgr Error 15: file not found Unable to locate necessary tables for adjustment. None of the options in grub4dos return anything but the above error. I heard that 1TB is the upper limit for locating Windows 7 partitions; is this true? How can I fix the above?

    Read the article

  • How to safely remove a device blocked by the System process with a handle on \$Extend\$RmMetadata\$Txf

    - by Heinzi
    I have an external HDD which I would like to "safely remove". Unfortunately, my system (Windows 7 x64) complains that "the device is currently in use". Using Process Explorer I discovered which process is holding a handle on the device: Obviously, System is not a process that I can just kill and be done with it. I've done a bit of research and this seems to be a common problem, but no solution has been found so far (except for rebooting the machine, which I'd like to avoid if possible). Is there any solution to this problem that I've missed?

    Read the article

  • write-through RAM disk, or massive caching of file system?

    - by Will
    I have a program that is very heavily hitting the file system, reading and writing randomly to a set of working files. The files total several gigabytes in size, but I can spare the RAM to keep them all mostly in memory. The machines this program runs on are typically Ubuntu Linux boxes. Is there a way to configure the file system to have a very very large cache, and even to cache writes so they hit the disk later? I understand the issues with power loss or such, and am prepared to accept that. Crashing aside, in normal operation the writes should eventually reach the disk! Or is there a way to create a RAM disk that writes-through to real disk?

    Read the article

  • Making Linux smart about partition or filesystem moves with a UUID selection dialog?

    - by Luke Stanley
    It seems to me a major part of frustration n00bs have with Linux is due to UUID changes not matching peoples intuition and just working. Does anyone know a way of making GRUB and /etc/fstab just ASK PEOPLE about UUID changes, instead of just failing after people try moving hard disk? Could this be done in Bash or such? Is there a different flag or two somewhere we could simply change? Seems like this, if made to work in common practice could be a major advantage.

    Read the article

  • xen-create-image does not create inird or initramfs image and domU does not starts with system image

    - by user219372
    I have Fedora 19 as Dom0. To create image I run # xen-create-image --hostname=debian-wheezy --memory=512Mb --dhcp --size=20Gb --swap=512Mb --dir=/xen --arch=amd64 --dist=wheezy After generation finished I start vm and see: # xl create /etc/xen/debian-wheezy.cfg Parsing config from /etc/xen/debian-wheezy.cfg libxl: error: libxl_dom.c:409:libxl__build_pv: xc_dom_ramdisk_file failed: No such file or directory libxl: error: libxl_create.c:919:domcreate_rebuild_done: cannot (re-)build domain: -3 In the /etc/xen/debian-wheezy.cfg i have # # Kernel + memory size # kernel = '/boot/vmlinuz-3.11.2-201.fc19.x86_64' ramdisk = '/boot/initrd.img-3.11.2-201.fc19.x86_64' and ls -1 /boot/*201* shows /boot/config-3.11.2-201.fc19.x86_64 /boot/initramfs-3.11.2-201.fc19.x86_64.img /boot/System.map-3.11.2-201.fc19.x86_64 /boot/vmlinuz-3.11.2-201.fc19.x86_64 Then if I fix ramdisk directive in .cfg file to /boot/initramfs-3.11.2-201.fc19.x86_64.img vm will start but os inside will not boot. In a tail of xl console I get [ OK ] Reached target Basic System. dracut-initqueue[130]: Warning: Could not boot. dracut-initqueue[130]: Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist dracut-initqueue[130]: Warning: /dev/fedora/root does not exist dracut-initqueue[130]: Warning: /dev/fedora/swap does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-root does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-swap does not exist dracut-initqueue[130]: Warning: /dev/xvda2 does not exist Starting Dracut Emergency Shell... Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist Warning: /dev/fedora/root does not exist Warning: /dev/fedora/swap does not exist Warning: /dev/mapper/fedora-root does not exist Warning: /dev/mapper/fedora-swap does not exist Warning: /dev/xvda2 does not exist Generating "/run/initramfs/sosreport.txt" Entering emergency mode. Exit the shell to continue. Type "journalctl" to view system logs. You might want to save "/run/initramfs/sosreport.txt" to a USB stick or /boot after mounting them and attach it to a bug report. dracut:/# .img files in /xen/domains/debian-wheezy exists and listed in disk section of debian-wheezy.cfg So what should i do? Update: I've found that xl does not mount images. In debian-wheezy.cfg I have that: root = '/dev/xvda2 ro' disk = [ 'file:/xen/domains/debian-wheezy/disk.img,xvda2,w', 'file:/xen/domains/debian-wheeze/swap.img,xvda1,w', ] And there is no /dev/xvda* or /dev/sda* or /dev/hda* files in VM.

    Read the article

  • On a Mac, how can I find all files on a NTFS partition that have the same name, given case *in*sensi

    - by SCdF
    Here's the deal, I have a huge mess of files on an external drive that is formatted as NTFS. I wish to copy all of these files onto my MacBook Pro. NTFS, like sane filesystems, is case sensitive. HFS is not. There is, somewhere in the mess of tens of thousands of files and directories, one or more 'duplicates' in the eyes of HFS. Theses are preventing me from copying the entire directory of data onto my mac. (MacOSX rather unhelpfully throws a general error explaining the problem, but not the exact file. It also doesn't give you an option to skip) What is the best approach to solve this? Does anyone know a tool that can find files and directories that have the same case-insensitive name?

    Read the article

  • How to install apt-get on a busybox embedded system?

    - by Daniel YC Lin
    My embedded system is for sh4 CPU. The debian distribution may get on http://www.si-linux.co.jp/pub/debian-sh/lenny-sh4/ I get the apt*.deb and extract the data.tar.gz. After setup the /etc/apt/sources.list, I could do 'apt-get update'. But it missing dependency when I try to run 'apt-get install ntpdate'. Is there any method to let apt-get ignore some base packages? Because those package is build by my original embedded system.(eg. busybox).

    Read the article

  • Should I be running my scheduled backups as SYSTEM or as the our domain admin?

    - by MetalSearGolid
    I have a daily backup which is scheduled through the Task Scheduler. It failed with a strange error code last night, but I was able to search and find a blog post with how to avoid the error in the future. However, one of his recommendations was to run the backups as the Administrator user of the domain. Since all of the files being backed up are local to this system, should I continue to have the backups run as SYSTEM? Or is it actually better to run it as a different user? I have been running these backups for well over a year now and have only had a handful of failures, but ironically when it does fail, the error code means it was a permissions issue (or so I read, this code seems to be undocumented by Microsoft). Thanks in advance for any insight into this. Might as well post the error code here too, in case anyone would like to share their insight on this as well, but I rarely ever get this error, so I don't care too much about it: 4294967294

    Read the article

  • PC monitors shut off and system hangs while playing 3D games, but sound continues - Diagnosis?

    - by Jon Schneider
    Two days ago, I started running into a problem with my Windows PC: The PC's two connected monitors simultaneously lose signal and go black (as though the PC had been powered off). The keyboard's Numlock, Capslock, and Scroll Lights will become "stuck" in their current positions, as though the PC is hung. (For example, the Numlock light on the keyboard remains lit regardless of me pressing the Numlock key repeatedly.) No keyboard input does anything. (Ctrl+Alt+Del, Ctrl+Shift+Esc, Ctrl+C, etc.) However -- Whatever sound/music the PC was playing continues to play, and the PC's fans continue running, so the PC hasn't powered itself off or rebooted itself. Opening up the case, the graphics card is pretty hot to the touch. I had this happen 3 times in one evening. In all cases, I was playing a game with 3D graphics when the problem occurred (Torchlight, Minecraft, Magic: The Gathering 2012, Avadon: The Black Fortress demo). I have yet to have the problem happen when I'm not playing a game. This system has been running stable for about 2.5 years prior to this. I didn't make any changes to the system prior to the problem starting to occur. System specs: OS: Windows 7 64-bit Processor: Intel Core 2 Duo E7200 Wolfdale 2.53GHz Video Card: XFX GeForce 9800 GT 512 MB Motherboard: Foxconn P45A-S LGA 775 Intel ATX RAM: Corsair 4 GB (2x 2GB) DDR2-800 (PC2 6400) Full specs: New PC 2008 Troubleshooting tried so far (the problem occurred again after taking each of these steps, one at a time): Updated the video drivers with the latest drivers from NVidia's site. Opened up the case and cleaned out the video card and processor fans (both were pretty dirty). Installed and ran temperature monitor software. The processor idles at about 50 degrees C, and goes up to about 63 degrees C while playing a game (seems on the warm side, but not excessively so?). The software wasn't able to report the temperature of the GPU -- not sure this particular GPU supports software temperature readout? My initial diagnosis is that maybe the GPU is on its last legs (given that it seems to be running pretty hot, and the problem only occurs while playing 3D games). Does this seem likely? Or is it likely that this problem is caused by the processor, RAM, or motherboard? Or could this be a software issue of some kind? Thanks for any advice!

    Read the article

  • How to mount a HFS partition in Ubuntu as Read/Write?

    - by GiH
    I plugged in my external harddrive (which was formatted on my Mac into HFS+ journaled) to my Ubuntu desktop 9.04 64bit. I am not able to get the drive to mount with write capability, how do I do that? Right now all I'm getting is read access, I tried sudo mount -t hfsplus /dev/sdf2 /media/"Portable HD" but that still gave me only read access... ideas??

    Read the article

  • How do I make compiling code not bring my system to its knees?

    - by Jason Baker
    I have a macbook with snow leopard and 2 gigs of RAM. When I compile C or C++ code, my system becomes all but unusable. For instance, when I compile llvm I notice that there are about 10 or 11 processes (cc1plus) getting launched at a time that suck up my CPU time and memory. Is there any way to maybe make it compile less at one time? I'll gladly wait a while longer to have my system usable while I'm compiling. Or is this something that you just have to live with when compiling C or C++?

    Read the article

  • System says memory controller not available and doesn't boot?

    - by Martin
    Hello everybody, Recently I have had a MainBoard-problem. I've send my mainboard to service and today I got it back from the company. It is a Foxconn 520a mainboard. Now I have installed my exchanged mainboard. But now I have a problem. My system boots until the device list with IRQ entries appear. The system says "Verifying DMI-pool-data..." and nothing happens. The IRQ-device list shows that the memory-controller is not available. All other devices have got an IRQ. Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ 0 0 0 10DE 0547 0500 Memory Controller NA Do you have any ideas where the problem could be? I already have disconnected all unnecessary devices like the hard disks. Perhaps it is a BIOS problem, but I don't know where I should look. Would be nice if there is any advice, Greetings, Martin

    Read the article

  • Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

    - by Giffyguy
    I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

    Read the article

  • Best PerfCounters for monitoring system health of IIS, WCF, WWF and .Net for a Workflow based soluti

    - by Gineer
    We have a solution built in .Net that will be installed into a client environment. The solution will span multiple servers and be running on multiple tiers. The client makes us of MOM (Microsoft operations Manager) to monitor the system. What are the best counters to use for monitoring the overall health of the system? Are there any built in counters that we could add into a MOM Pack (as an Alert) to test a given scenario? Any thoughts suggestions would be much apreciated. Thanks

    Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >