Search Results

Search found 25225 results on 1009 pages for 'default constructor'.

Page 242/1009 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

• how to setup duel monitors an xorg.conf

  - by MrMonty

  # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection thats my file!

  Read the article

• Start vino-server (VNC) before login on Linux CentOS

  - by Dr. Gianluigi Zane Zanettini

  I'm using the default vino-server package to access my CentOS 6 workstation via VNC. It works ok, but only AFTER I locally login on the workstation. I need to have vino-server start BEFORE the login, right at the Gnome login screen where I choose username and password. Due to personal reasons, I need to use Vino and not vnc-server or any other packages. I already tried to insert /usr/libexec/vino-server & in /etc/gdm/Init/Default but this didn't solve the issue.

  Read the article

• freebsd-update from 8.3-RELEASE to 9.0-RELEASE: How to deal with dozens of diffs?

  - by Stefan Lasiewski

  I am upgrading a FreeBSD 8.3-RELEASE system to FreeBSD 9.0-RELEASE using freebsd-update. This is my first time performing a major version upgrade in FreeBSD. At one point in the process, freebsd-update performs a diff on files which are different then what is expected for the 9.0-RELEASE. It compares the current version on the system with the new changes added from 9.0-RELEASE. There are dozens of files in the list. Thus, I am presented with dozens and dozens of diffs which open in a vi window and look like this: The following file could not be merged automatically: /etc/ntp.conf Press Enter to edit this file in vi and resolve the conflicts manually... ### vi window opens <<<<<<< current version driftfile /etc/ntp/drift ======= # # $FreeBSD: release/9.0.0/etc/ntp.conf 195652 2009-07-13 05:51:33Z dwmalone $ # # Default NTP servers for the FreeBSD operating system. # # Don't forget to enable ntpd in /etc/rc.conf with: # ntpd_enable="YES" # # The driftfile is by default /var/db/ntpd.drift, check # /etc/defaults/rc.conf on how to change the location. # >>>>>>> 9.0-RELEASE restrict default notrust nomodify ignore And so on. This requires that I manually edit each file and remove the strings like <<<<<<< current version >>>>>>> 9.0-RELEASE and =======. As I discovered afterwards, if I don't remove these strings, they end up in the file afterwards. There are dozens of files which differ between 8.3 and 9.0, and I have a dozen local modifications myself. It appears that freebsd-update is using a diff, sdiff or mergemaster function of some sort, but I can't tell what it is doing exactly. Processing these files is tedious. Is there a way that I can just say "Accept new version" or "keep old version" or "Your merge is correct"? There has got to be an easier way to deal with these files. I must be missing something. This isn't a huge problem for one machine, but eventually I'll be doing this dozens of times and I want to find an easier way.

  Read the article

• nginx + php fpm -> 404 php pages - file not found

  - by Mahesh

  *2037 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream server { listen 80; ## listen for ipv4; this line is default and implied #listen [::]:80 default ipv6only=on; ## listen for ipv6 server_name .site.com; root /var/www/site; error_page 404 /404.php; access_log /var/log/nginx/site.access.log; index index.html index.php; if ($http_host != "www.site.com") { rewrite ^ http://www.site.com$request_uri permanent; } location ~* \.php$ { fastcgi_index index.php; fastcgi_pass 127.0.0.1:9000; #fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_buffer_size 128k; fastcgi_buffers 256 4k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_read_timeout 240; include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; } location ~ /\. { access_log off; log_not_found off; deny all; } location ~ /(libraries|setup/frames|setup/libs) { deny all; return 404; } location ~ ^/uploads/(\d+)/(\d+)/(\d+)/(\d+)/(.*)$ { alias /var/www/site/images/missing.gif; #i need to modify this to show only missing files. right now it is showing missing for all the files. } location ~* \.(jpg|jpeg|png|gif|ico|css|js)$ { access_log off; expires 20d; } location /user_uploads/ { location ~ .*\.(php)?$ { deny all; } } location ~ /\.ht { deny all; } } php-fpm config is default and is not touched. The problem is little strange for me. Error pages are showing File not found only if they are .php files. Other error files are clearly calling the 404.php file site.com/test = calls 404.php site.com/test.php = File not found. I am searching and making changes. but it hasn't solved the problem.

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Configuring subdomains for a machine (Win2k8) in a lan

  - by RMS

  I am currently setting up a windows 2008 server to host a website with multiple subdomains, all accessible only within the lan. also, there is no active directory. what I did is : 1 - computer name : 'web' 2 - in IIS, I added a site binding as 'site1.web' to the default web site 3 - added DNS role to the server 4 - added 'web' as principal zone in direct lookup zones (default options) 5 - added CNAME 'site1' From a client machine, in tcpip config I added the ip address of 'web' to the DNS list in addition to the ISP DNS. (client machine ip is from DHCP) Now browsing to 'http://web' or 'http://site1.web' works correctly. My question is, is it possible throught additional steps in the server to have the websites accessible without requiring the DNS config in all the client machines ? thanks in advance

  Read the article

• securing unpatched websites

  - by neuron

  I have a client with a lot (read several thousand) websites in several old cms solutions that are no longer maintained. Now moving all of them to a maintained solution isn't really an option at this point. So I'm thinking about ways to secure the solutions without patching them. The solutions are mostly joomla 1.0/1.5 and wordpress. What I'm thinking is something like this: mod_suexec to lock everyone into their own home directory apparmor to deny any and all file writes by default. (exclude by default, include things like "images" directories). use htaccess to prevent anything in writable directories from being executed. (aka disable php_engine for images/ directory). mysql triggers to check the "users" tables to prevent adding new admins/superadmins. Does this make sense? Is it viable? Am I missing something obvious?

  Read the article

• Network interface selection

  - by Antonino

  Hello. Suppose I have more than a network interfaces and I want to selectively use them per application. eth0 is the standard interface with the standard gateway in the main routing table eth1 is another interface with a different gateway. Suppose I launch an application as a user "user_eth1". I used the following set of rules for iptables / ip rules. IPTABLES: iptables -t mangle -A OUTPUT -m user --uid-owner user_eth1 -j MARK --set-mark 100 iptables -t nat -A POSTROUTING -m user -uid-owner -o eth1 user_eth1 -j SNAT --to-source <eth_ipaddress> IPRULE: ip rule add fwmark 100 lookup table100 and i build "table100" as follows (no doubts on that) ip route show table main | grep -Ev ^default | while read ROUTE; do ip route add table table100 $ROUTE; done ip route add default via <default_gateway> table table100 It doesn't work at all. What's wrong with this? Thank you in advance!

  Read the article

• What are working xorg.conf settings for using a Matrox TripleHead2Go @ 5040x1050?

  - by Brendan Abel

  I'm trying to configure xorg.conf to correctly set the resolution of my screens. I'm using a matrox triplehead, so the monitor is a single 5040x1050 screen. Unfortunately, it's being incorrectly set to 3840x1024. Here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 57.0 - 75.0 #Option "DPMS" Modeline "5040x1050@60" 451.27 5040 5072 6784 6816 1050 1071 1081 1103 #Modeline "5040x1050@59" 441.28 5040 5072 6744 6776 1050 1071 1081 1103 #Modeline "5040x1050@57" 421.62 5040 5072 6672 6704 1050 1071 1081 1103 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GTX+" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "5040x1050" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Set Microsoft Word template to always save documents based on it to a certain location

  - by nhinkle

  Some of my professors demand very specific formats for papers typed up for their courses. I've created word templates (.dotx files) for these, so I don't have to set up the formatting each time I go to write something. I already have a template for each of my classes, and have my files organized such that each class has its own directory. I would like to be able to specify a default save location for each template. I know how to set the general default save location for all documents, but I want to change it just for a specific template. Even if there were a way to have it save files generated by the template into the folder the template file resides in, that would be nice. Anybody have any ideas?

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• The Mac Tax

  - by Robert May

  One of our users was having difficulties with their mac and using some web software.  I decided to go peruse the landscape and see how much of a premium people were paying for their macs.  I priced out a Dell and a Mac from their websites.  I tried to get them as close to the same configuration, from a hardware standpoint, as I could.  I found the following: Apple Macbook Pro   Dell XPS 17 There are several important differences in the hardware: The mac doesn’t have a blueray player, but the dell does. The mac has a slightly slower processor. The mac claims to have a better battery, but doesn’t list the specifics, so there’s no way to tell. The mac doesn’t list the video card stats, so there’s no way to tell how comparable they are, but they’re probably close. The mac doesn’t come with any additional software.  No iWorks, iPhoto, etc.  They were left to their default of None, so arguably, the Dell is more functional out of the box. Other than changing the hardware specs to be close, all other configuration options were left at their default. So riddle me this, Batman:  Why do people buy Macs?  I have several dev buddies that own them, but I can’t justify the cost.  First, most of them load bootcamp and/or parallels at extra cost to run windows 7 and windows apps.  The hardware isn’t as good.  The price is almost twice as expensive. How do you justify the premium price? Technorati Tags: General

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Why do we have to use break in switch

  - by trejder

  Who decided, and basing on what concepts, that switch construction (in many languages) has to be, like it is? Why do we have to use break in each statement? Why do we have to write something like this: switch(a) { case 1: result = 'one'; break; case 2: result = 'two'; break; default: result = 'not determined'; break; } I've noticed this construction in PHP and JS, but there are probably many other languages that uses it. If switch is an alternative of if, why we can't use the same construction for switch, as for if? I.e.: switch(a) { case 1: { result = 'one'; } case 2: { result = 'two'; } default: { result = 'not determined'; } } It is said, that break prevents execution of a blocks following current one. But, does someone really run into situation, where there was any need for execution of current block and following ones? I didn't. For me, break is always there. In every block. In every code.

  Read the article

• Sharding / indexing strategy for multi-faceted search

  - by Graham

  I'm currently thinking about our database structure and how we modify it for scale. Specifically, we're thinking about using ElasticSearch to provide our search functionality. One common pattern with ElasticSearch seems to be the 'user-routing' pattern; that is, using routing to ensure that any one user's data resides on the same shard. This is great for client-specific search e.g. Gmail. Our application has a constraint such that any user will have a maximum of a few thousand documents, so this pattern seems like a good candidate. However, our search needs to work across all users, as well as targeting a specific user (so I might search my content, Alice's content, or all content). Similarly, we need to provide full-text search across any timeframe; recent months to several years ago. I'm thinking of combining the 'user-routing' and 'index-per-time-interval' patterns: I create an index for each month By default, searches are aliased against the most recent X months If no results are found, we can search against previous X months As we grow, we can reduce the interval X Each document is routed by the user ID So, this should let us do the following: search by user. This will search all indeces across 1 shard search by time. This will search ~2 indeces (by default) across all shards Is this a reasonable approach, considering we may scale to multi-million+ documents? Or should I be denormalizing the data somehow, so that user searches are performed on a totally seperate index from date searches? Thanks for any pros-cons of the above scenario.

  Read the article

• Cannot Boot, How to recover

  - by Kendor

  Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

  Read the article

• Xorg crashes ever since using Nvidia dual monitors

  - by legion

  Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Virtual hosting in Varnish with individual vcl files for configuration

  - by Michael Sørensen

  I wish to use varnish to put in front of an apache and a tomcat on the same server. Depending on the ip requested, it goes to a different backend. This works. Now for most of the sites the default varnish logic will work just fine. However for some specific sites I wish to use custom VCL code. I can test for host name and include config files for the specific domains, but this only works inside the individual methods recv etc. Is there a way to include a complete set of instructions, in one file, per domain, without having to manage separate files for subdomain_recv, subdomain_fetch etc? And preferably without running seperate instances of varnish. When I try to include a file on the "root level" of default.vcl, I get a compilation error. Best regards, Michael

  Read the article

• Virtualizing Firewalls/UTM

  - by TheD

  So Sophos UTM (Astaro Gateway UTM) can be virtualized in Hyper-V, VMWare, vSphere etc. Now I'm new to virtualization, so am wondering how the networking would be configured in this situation. Imagine the following (a very simple setup). A Zyxel router acting as the default gateway, standard ADSL line. This is connected directly via Ethernet to my VHost, Hyper-V in my case. Now I assume I need two virtual network adapters, one which is the "External" interface to the firewall, and the other being the "Internal" interface. But where does my switch go, since I have 5 machines (or X number of machines). Where is the switch connected, to the internal interface on the VHost? What default gateway do my clients use etc? How would the routing work if these two interfaces weren't bridged since they are virtual networks anyway. I'm a little confused! Any advice is much appreciated! Cheers

  Read the article

• KDE doesn't start up anything else

  - by Shane

  I just installed KDE under Arch Linux. Problem is, nothing is starting up right with it - no window manager, no panels, nothing. All I get is a small terminal window in the bottom right corner of the screen, which I'm assuming is konsole. From that single window I can do things like start kwin or launch programs whose names I happen to know (like chromium or firefox), but I don't have a panel for starting programs or switching between programs. It doesn't matter whether I start kdm through inittab or manually by typing # /etc/rc.d/kdm start. KDM looks great, but once I log in as my normal user I just get a console window with no decoration. Is there a startup script for KDE somewhere that needs to run, and usually has a bunch of programs by default - like a window manager, panels, widgets, and all the normal background programs that run in an ordinary GUI? If so, how can I "restore" the default behavior?

  Read the article

• How to stop Word 2011 opening hyperlinks on click?

  - by John Yeates

  In previous versions of MS Word, there was a preference for the action to be taken when the user clicked a hyperlink: open it, or edit it. Word 2011 appears to have defaulted to opening the hyperlink, and I can't find the preference to change this behaviour. How can I change Word's default behaviour when a hyperlink is clicked to be editing the text of the hyperlink? Holding down a modifier key when clicking is not an acceptable solution, as the aim here is to prevent misclicks from causing web pages to open. Edit: the links need to stay as links in the saved document. But when clicked on my machine, they should not open; Word needs to default to just editing the link, so an inaccurate click does not take me out of the document into Safari. Older versions of Word had a preference controlling this, and Microsoft seem to have removed it and fixed the behaviour at the unsafe option in order to satisfy the point-and-drool crowd.

  Read the article

• SnapBird Supercharges Your Twitter Searches

  - by ETC

  Twitter’s default search tool is a bit anemic. If you want to supercharge your Twitter search, fire up web-based search tool SnapBird and dig into your past tweets as well as those of friends and followers. Yesterday I was trying to find a tweet I’d sent some time last year regarding my search for an application that could count keystrokes for inclusion in my review of the app I finally found to fulfill the need, KeyCounter. Searching for it with Twitter’s search tool yielded nothing. One simple search at SnapBird and I nailed it. SnapBird requires no authentication to search public tweets (both your own and those of your friends and follows) but does require authentication in order to search through your sent and received direct messages. SnapBird is a free service. SnapBird Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents Peaceful Tropical Cavern Wallpaper

  Read the article

• pinx 501 with print server - 10 licenses

  - by ra170

  I have pix 501 with only 10 licenses. I'm already approaching this limit, running 2 computers at home, 2 laptops, PS3, iphones, 2 web cams..not everthing is on all the time, but it's possible as I'm looking into adding a print server, so that I can print from anywhere in the house. So my question is, will the print server count as a connection towards the license? I think it will need default gateway, which in this case will be my pix 501. I've seen somewhere on some othee board saying, don't set default gateway in the print server to pix 501, but then how would that work? is there a work around? I don't need to print from VPN or from outside, just inside..

  Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >