Search Results

Search found 9559 results on 383 pages for 'mail rule'.

Page 242/383 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

• Linux box acting as wireless access point to share the internet connection

  - by Suresh

  A linux machine is connected to internet over two interfaces ppp0 and ppp1 using two modems. Also this machine acts as wireless access point through an interface say, eth0 with ip address 192.168.1.1 and acts as gateway for the connected devices through this network with subnet mask 255.255.255.0 Now is it possible to achieve the following: When any of the connected devices through wireless AP needs internet connection linux machine has to use ppp1 interface for internet. If any of the applications on the linux machine needs internet connection linux machine should use ppp0 interface for the internet. Can this be achieved by adding rules to chains in filter/nat tables? If the kernel routing table has a default rule to route the default traffic through interface ppp0, wil kernel completely ignore ppp1 for internet? PS: new to networking and routing concepts, If the question is not clear leave a comment, will try to give more information.

  Read the article

• Where is the actual content in a TCP segment

  - by packetloss

  When I email something or download a program, or do anything else over a network, where in the segment is the actual content? If I am emailing a 20KB word document, and the maximum data field size in a segment is 1500 bytes, does that mean it takes about 14 segments to mail my document wherever it is going? I get, I think, the OSI model and I have a decent grasp of the IP protocol. I think I understand the concept of header wrapping of each successive layer in the protocol stack. What I can't get a definitive answer to is where does the actual content go in a TCP segment? Is that the datagram? Maybe the fact I am asking proves I have no clue... Many thanks.

  Read the article

• Deleted items on Deleted Items folder are not shown

  - by Ken

  When I run this cmdlet, I get the following result: [PS] C:\Windows\system32Get-MailboxFolderStatistics user | ft FolderPath, FolderSize -autosize FolderPath FolderSize ---------- ---------- /Top of Information Store 156 B (156 bytes) /Calendar 244.2 KB (250,025 bytes) /Contacts 1.223 MB (1,282,252 bytes) /Contacts/SenderPhotoContacts 30.41 KB (31,139 bytes) /Conversation Action Settings 0 B (0 bytes) /Conversation History 206.2 KB (211,147 bytes) /Deleted Items 1.449 MB (1,519,602 bytes) /Drafts 472 B (472 bytes) /Inbox 618 MB (648,025,798 bytes) /Journal 144 B (144 bytes) /Junk E-Mail 131.9 KB (135,089 bytes) /News Feed 0 B (0 bytes) /Notes 1.847 KB (1,891 bytes) /Outbox 0 B (0 bytes) /Quick Step Settings 0 B (0 bytes) /RSS Feeds 0 B (0 bytes) /Sent Items 6.754 KB (6,916 bytes) /Suggested Contacts 9.316 KB (9,540 bytes) /Sync Issues 0 B (0 bytes) /Sync Issues/Conflicts 0 B (0 bytes) /Sync Issues/Local Failures 0 B (0 bytes) /Sync Issues/Server Failures 0 B (0 bytes) /Tasks 7.994 KB (8,186 bytes) /Recoverable Items 12.16 MB (12,748,519 bytes) /Deletions 0 B (0 bytes) /Purges 0 B (0 bytes) /Versions 0 B (0 bytes) But when I open the mailbox using both Outlook and OWA, the deleted items folder is empty. I'm guessing it's corrupted or something like that. Is it possible to recover it somehow? Thanks.

  Read the article

• ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

  - by TecBrat

  The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

  Read the article

• send and recieve email with custom domain address, using gmail

  - by ahmad598

  i've registered a domain, and went to create a google apps account with that. but google told me they don't accept .ir domains, possibly trying to prevent us from building bombs (which completely makes sense), or simply lack of interest. anyway. so now i'm seeking for a way to use gmail, but with my own domain name, all without using google apps. i've added my domain to a free dnspark.net account, and it doesn't have mail forwarding, but i can set MX records. is there anyway i could accomplish my task? or is it completely impossible?

  Read the article

• http, https and ftp is not working but smtp and imap is working

  - by Unicron

  hi all, yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. i have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. how can i safeley remove the rest of norton internet security? thanks in advance [edit] norton internet security 2010 is sucesfully removed, but still no connectivity

  Read the article

• ASA 5510 Need to filter traffic log events to my iPhone

  - by drpcken

  For some reason I cannot update apps or download apps to any ios devices on my network (tried both iphone and ipads). When I'm at home on my own network everything works fine. This started about a week ago. I've configured my iphone with a static IP address and even used 4.2.2.2 as my dns to rule out that the issue is with my DNS Server. I'm looking at the SYSLOG in ASDM (Cisco ASA 5510) but Im not sure it is providing me enough info. It seems to be showing ACL blocks on my public ip address, but not individual client IP's, so I can't see whats going on. How can I setup a way to filter any incoming/outgoing traffic to my iPhone's static IP and try and troubleshoot this?

  Read the article

• Windows server 2008 rejecting packets from client

  - by l46kok

  We deployed a server application in .NET 4.0 that is going to run on Windows Server 2008 R2. Strangely, the clients cannot connect to the server given an external IP and the server port. I've ran wireshark diagnostics on the server computer and verified that the packets are arriving to the NIC without any issue so it seems Windows Server 2008 is the culprit here. I've tried to temporarily disable the firewall and add the server port into inbound/outbound rule but it still doesn't solve the issue. How can I solve this issue?

  Read the article

• Automated git push attempt does not work - authentication issue

  - by at least three characters

  I'm trying to automate a very periodic git add/commit/push cycle using a shell script and cron under OS X 10.8.5. The script is as basic as one would expect it to be: cd /my/directory git add . git commit -m "a commit message with the date" git push -u origin master I've tried running it both as root as well as a non-root user. When I do this manually, I get a dialog box from OS X requesting that I authenticate the operation. Running the script (either using cron or just using sh) ends up sending a message (via mail) to whichever user's cron executed the script saying that it was unable to write a file in the .git directory because of a permissions issue (which is most likely manual execution requires authentication). Is there any way to circumvent this issue, or give the script permission to perform this operation without having me intervene each time?

  Read the article

• ReadyNAS issue with Google Apps?

  - by Jauder Ho

  The power went out (again) in my house today so I decided to set up some alerting. Since I have a ReadyNAS and the latest version of Raidinator seems to have SMTP TLS support, I figured I would try setting things up to email to a domain I have hosted on Google Apps. At this point, I have everything working IF I use a Gmail account but as soon as I switch to a Google Apps email address, it stops working and complains with smtpstatus=535 smtpmsg='535-5.7.1 Username and Password not accepted. Learn more at \n535 5.7.1 http://mail.google.com/support/bin/answer.py?answer=14257 30sm16076226wfd.23' errormsg='authentication failed (GNU SASL, method PLAIN)' exitcode=EX_NOPERM I'm wondering if anyone else has encountered this. Google's extremely aggressive captcha does not help but I am able to log in now without a captcha from a browser so I'm open to any ideas why the simple switch of a user/password combo that is supposed to work does not. I'm also attaching my config so that others can see how to set things up.

  Read the article

• Best practices for mass email platform

  - by Niro

  I am in the process of setting up mass email service. My question is: what are the best practices to achieve maximum deliver-ability. More precisely - what should I do/know to prevent spam filters from blocking the emails (the emails are not spam). for example- how can I tell if my IP address is blacklisted somewhere and how can I prevent it from becoming blacklisted. Is amazon web services a suitable platform due to dynamic IP addresses, what are the restrictions on the from address, can it be different from the mail server domain.... you get it....

  Read the article

• MikroTik ipv6 Tunnel

  - by MikeSmitty

  I've got a MikroTik router set up with the latest stable OS on it, and I just set up an ipv6 tunnel with Hurricane Electric, but I'm having an odd issue with it. I can't ping anything until I first ping the tunnel endpoint on HE's side. After that I can ping any ipv6 address fine, but give it a little time (say, maybe 30 sec) and I can't ping any ipv6 addresses again. Whenever it stops allowing ping to go through I notice the counter on my firewall rule that drops invalid connections goes up. this is my ipv6 firewall config: add action=accept chain=input comment="" connection-state=established \ disabled=no in-interface=sit1 add action=accept chain=input comment="" connection-state=related disabled=no \ in-interface=sit1 add action=accept chain=input comment="" disabled=no in-interface=bridge \ src-address=ipv6_address_here/64 add action=drop chain=input comment="" connection-state=invalid disabled=no \ in-interface=sit1 add action=drop chain=input comment="" disabled=no in-interface=sit1 Any ideas on what it could be?

  Read the article

• How to test if SYN and FIN are both dropped at the same time in hping3?

  - by snow

  One of the rules to prevent unexpected attack is to prevent SYN & FIN being used together. SYN and FIN are both set $IPT -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP How do I use hping to test if this iptable rule works? hping3 192.168.7.0 --keep -S -F??? Is this complete? When just type iptables -L, it shows: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere DROP tcp -- anywhere anywhere tcp flags:FIN,SYN/FIN,SYN WHY do I need to put the "SYN,FIN" twice before drop? Is it because one for source and one for destination?

  Read the article

• Options to optimize lotus notes 8.5.X

  - by Jakub

  Has anyone found actually useful optimization methods for the bulky, fat, eclipse giant, nuissance that is Lotus Notes 8.5? I want it to be fast, and not eat up system resources like crazy while I run it ALL day (as it is my company's corporate mail / cal / scheduling solution). I've tried various hacks for the JVM heap size (if I recall correctly). None really bring a performance improvement. I have a dual core cpu, if that helps (I tried going the route of optimizing JAVA for 2 cores in hopes it would work, but seen no speed improvement). Notes is just sooo bloated, anyone have any suggestions to optimize/mod this thing so it is more responsive and less of a resource hog. Note: I don't want to switch to the web version, or the standard stripped down versions, I am aware of those, I just cannot since we don't run those internally for the company.

  Read the article

• Company Password Management

  - by Brian Wigginton

  The topic of personal password management has been covered in great detail time after time. This question is aimed at the business or organization that needs to keep track of many unique passwords for many clients. What are some strategies/tools or ideas you all have for accomplishing this task? I was at an Interactive Agency, where we needed to keep track of client DB, ftp, mail... and for different environments for the app so any one client would have up to 3-10 passwords usually. This can get crazy when there are more than 250 clients

  Read the article

• What is the best backup solution for VMware Infrastructure system that hosts a wide variety of VMs?

  - by SBWorks

  In a situation where you are running: VMware Infrastructure 4.x with multiple hosts Over 150 VMs with a wide variety of operating systems (Linux in a half dozen distros, Solaris, every MS version, etc.) in multiple languages with almost every mix of installed software (luckily, no Exchange mail servers) Using an EMC fiber channel SAN The VWs that need need to be backed up use about 2 terabytes of data (total) The goal is to keep backups for about 3-months At this rough scale, what backup solutions have worked well for you? And, as an add-on question, did any of them have de-duplication that you thought was effective and useful?

  Read the article

• Postfix : error: unsupported dictionary type: mysql

  - by flavio.troja

  I've a problem w/ postfix problem: # tail -f /var/log/mail.err Aug 20 17:57:50 myserver postfix/smtpd[8243]: error: unsupported dictionary type: mysql Aug 20 17:57:50 myserver postfix/smtpd[8243]: error: unsupported dictionary type: mysql Aug 20 17:58:05 myserver postfix/smtpd[8244]: error: unsupported dictionary type: mysql Aug 20 17:58:05 myserver postfix/smtpd[8244]: error: unsupported dictionary type: mysql Aug 20 18:00:38 myserver postfix/smtpd[8277]: error: unsupported dictionary type: mysql Aug 20 18:00:38 myserver postfix/smtpd[8277]: error: unsupported dictionary type: mysql Aug 20 18:03:32 myserver postfix/smtpd[8320]: error: unsupported dictionary type: mysql Aug 20 18:03:32 myserver postfix/smtpd[8320]: error: unsupported dictionary type: mysql Aug 20 18:03:33 myserver postfix/trivial-rewrite[8322]: error: unsupported dictionary type: mysql Aug 20 18:03:33 myserver postfix/trivial-rewrite[8322]: error: unsupported dictionary type: mysql idea?

  Read the article

• Practical RAID Performance?

  - by wag2639

  I've always thought the following to be a general rule of thumb for RAID: RAID 0: Best performance for READ and WRITE from stripping, greatest risk RAID 1: Redundant, decent for READ (I believe it can read from different parts of a file from different hard drives), not the best for WRITE RAID 0+1 (01): combines redundancy of RAID 1 with performance of RAID 0 RAID 1+0 (10): slightly better version of RAID 0+1 RAID 5: good READ performance, bad WRITE performance, redundant IS THIS ASSUMPTION CORRECT? (and how do they compare to a JBOD setup for R/W IO performance) Are certain practical RAID setups better for different applications: gaming, video editing, database (Acccess or SQL)? I was thinking about hard disk drives but does this apply to solid state drives as well?

  Read the article

• Mac OS X Server add server user

  - by Meltemi

  What's the recommended way to add a user to Mac OS X Server that doesn't need all the hoopla associated with Workgroup Manager? There are many users pre-configured in Mac OS X Server (www, root, ldapadmin, etc.) that don't have "Full Name" or mail accounts, etc. I'd like to create a 'svn' user to be the owner of our Subversion Repository as per this tutorial: If you've decided to use either Apache or stock svnserve, create a single svn user on your system and run the server process as that user. Be sure to make the repository directory wholly owned by the svn user as well. From a security point of view, this keeps the repository data nicely siloed and protected by operating system filesystem permissions, changeable by only the Sub- version server process itself. Wondering if there's a way outside of WorkgroupManager and OpenDirectory as this account will be entirely server based. Is this still sound advice under OS X Server? If so what's the easiest way to create the user (Mac OS X Server doesn't seem to respond to useradd).

  Read the article

• Moving Portable Office. Have a LAN & Phone line query?

  - by John Smith

  We are about to move a portable office that has 8 phones and 12 lan connections. They are all wired back to our main switch and Nortel bcm200 phone system which are only about 20m (65ft) away. After the move the office will be 180m (600ft) away from these. What is the maximum length of cable a digital phone line can be? I am aware that a lan connection can only be 100m (305ft) when using cat5e utp. Does this rule apply to phone connections also? If so how can I extend beyond 100m for the phones? I was going to install about three cabinets, 3 switches and 6 patch panels for the lan connections but the ideal struck me tonight that maybe I could run a fibre optic line. Would this be feasible? Any feedback on this is greatly appreciated. Thanks

  Read the article

• Evolution Gmail Mashup + Fixing Time stamp

  - by Dan

  I wanted to migrate my university email (including subfolders) to my gmail account. Since gmail only imports POP3 which doesn't have subfolders, I had to connect to both gmail and my university mail using an email client (I am using Evolution) and then drag each folder from my university account to my gmail account. This worked for the most part, but the time stamp on every email I dragged over from my university account to gmail reads as todays date, when it was dragged over. If I enter the email and hit details it shows the actual sent date. How can I get it to not overwrite the received date when transferring? (as I assume this is what is happening). Thanks

  Read the article

• Server Core remote management from Windows 7 machine

  - by Robert Koritnik

  I've installed Remote Server Administration Tools for Windows 7 because I would like to administer my Windows Server 2008 R2 Server Core machine. The problem that I'm getting when I try to run Server Manager is: Connecting to remote server failed with the following error message: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. This is what I've done so far: I'm running WinRM service on both machines (Server and Window 7) I've added my server to trusted hosts on my Windows 7 machine: winrm set winrm/config/client @{TrustedHosts="WINSRV2"} I've added registry entry on Windows 7 machine: reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f I've enabled Remote Management inbound rule on server firewall using CoreConfigurator 2.0 both machines are in the same subnet and when I search for network machines on Windows 7 I see my server. Question What else should I do to make it work? I would like to run several different remote management tools against my server machine.

  Read the article

• Virtualmin Configuration

  - by Allen

  I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

  Read the article

• What sort of attack URL is this?

  - by Asker

  I set up a website with my own custom PHP code. It appears that people from places like Ukraine are trying to hack it. They're trying a bunch of odd accesses, seemingly to detect what PHP files I've got. They've discovered that I have PHP files called mail.php and sendmail.php, for instance. They've tried a bunch of GET options like: http://mydomain.com/index.php?do=/user/register/ http://mydomain.com/index.php?app=core&module=global§ion=login http://mydomain.com/index.php?act=Login&CODE=00 I suppose these all pertain to something like LiveJournal? Here's what's odd, and the subject of my question. They're trying this URL: http://mydomain.com?3e3ea140 What kind of website is vulnerable to a 32-bit hex number?

  Read the article

• IE8 Windows 7 (64bit) security certificate problem

  - by Steve

  Hi, We have just received some new computers for use in the office (Dell Vostro). They seem to work fine in the main. When we use IE8 to go to some web pages such as yahoo mail it tells us: “There is a problem with this websites security certificate” If we have a look at the details it says: “This certificate cannot be verified up to a trusted certification authority” This however works correctly in Firefox. I don't understand why I should get such an error message, should this not just work? I don't think its anything to do with the certificate itself as this is happening on www.yahoo.co.uk and other commercial (amazon I think?) sites. I think there is something off with the PCs setup. The PC has Windows 7 (64 bit) and Norton Internet Security installed. Any ideas as to why this is happening? Thanks

  Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >