Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 243/314 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

  • Router block some sites

    - by Mahesha999
    Hi I was using ADSL Modem/Router earlier. The device is quite old Pronet PN-ADSL 101 E/U model (pics: http://bit.ly/P2YaWy, http://bit.ly/OA700l) Since it had only one RJ45 out, I bought new Wireless Router TPLink TL-WR941ND. It has 4 RJ45 out and 3 wireless antennas. I configured my old router in bridge. Now, if I have to connect my pc to Internet through the old router, I have to enter username and password. Then I connected the RJ45 output of old router to the WAN in of new router. and ran the CD of new router. It configured the new router in PPPoE by saving the username and password in router to dial automatically. So now I have to just plug in the wires in my new routers any RJ45 out. I am able to access the Internet when I connect through new router (both wired and wirelessly), but some sites are getting blocked. Most notably yahoo.com (though ymail.com is working), Microsoft.com. msn.com. These sites work perfectly fine when I connect my pc directly to my old router and enter username and password manually. (However others like google.com. facebook.com works fine when connect through new router) So here these some sites need some parameter set but I am unable to find them out. Can anyone help me. My friend said he also faced same problem. Surprisingly he advised me to see if the same websites will work through Opera turbo mode and boom they worked. So what could be the problem?

    Read the article

  • Measure Total Bandwidth for Billing

    - by TonyZ
    I am setting up a new network which customers will host their applications on. It needs to be able to scale out to a few hundred servers and each server will have several VMs on it. Right now in my test environment, after the telco router, we are using a Linux router/firewall which is then connected to a Layer 2 switch. Could be a layer 3 in the future. I need to track total bandwidth per VM for each machine, and I need to do it in a way that it is not part of the VM. Each VM will have a private class ip address which is Natted by the gateway, or we may eventually run more than firewall/reverse proxy off a layer 3 switch. So my thinking is that I can do it off of a promiscuous port on the switches, or at the gateway firewall. I would like to have an out of the box solution, preferably open source. Does anyone have suggestions on the easiest way to set this up, and the easiest tool to use. I have looked at the web sites for Nagios, Zenoss, Zabbix, ntops on the firewall, etc. It is hard to ascertain just from the web sites if they do exactly this or not. Obviously, performance is also somewhat key here. Anything running on the gateway should not drag it down doing traffic accounting. Thanks for any thoughts. Tony Zakula

    Read the article

  • Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

    - by Bowsa
    I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to AD objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated! Some further info: Firewalls are disabled on the Server 2008, SBS, and client machines. Manually installing and adding the client in also fails, as the DPM server tries to contact the DC first. Edit: I tried creating a new protection group instead, and it gives a different error upon adding the machines: Following machines are not found in AD: COMPUTERNAME.COMPANYNAME.LOCAL Is there a certain directory structure it follows in AD?

    Read the article

  • Force Juniper-network client to use split routing

    - by craibuc
    I'm using the Juniper client for OSX ('Network Connect') to access a client's VPN. It appears that the client is configured to not use split-routing. The client's VPN host is not willing to enable split-routing. Is there a way for me to over-ride this configuration or do sometime on my workstation to get the non-client network traffic to by-pass the VPN? This wouldn't be a big deal, but none of my streaming radio stations (e.g. XM) work will connected to their VPN. Apologies for any inaccuracies in the terminology. ** edit ** The Juniper client changes my system's resolve.conf file from: nameserver 192.168.0.1 to: search XXX.com [redacted] nameserver 10.30.16.140 nameserver 10.30.8.140 I've attempted to restore my preferred DNS entry to the file $ sudo echo "nameserver 192.168.0.1" >> /etc/resolv.conf but this results in the following error: -bash: /etc/resolv.conf: Permission denied How does the super-user account not have access to this file? Is there a way to prevent the Juniper client from making changes to this file?

    Read the article

  • Courier IMAP always disconnects since update

    - by Raffael Luthiger
    Since one of our customers updated their server courier does not handle IMAP connections properly any more. POP3 works without any problems. When I try to test IMAP with telnet then it is always like this: $ telnet domain.com 143 Trying 188.40.46.214... Connected to domain.com. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2011 Double Precision, Inc. See COPYING for distribution information. 01 LOGIN [email protected] test Connection closed by foreign host. I enabled debugging in the authdaemond but the output does not really help much: Apr 12 23:10:04 servername authdaemond: received auth request, service=imap, authtype=login Apr 12 23:10:04 servername authdaemond: authmysql: trying this module Apr 12 23:10:04 servername authdaemond: SQL query: SELECT login, password, "", uid, gid, homedir, maildir, quota, "", concat('disableimap=',disableimap,',disablepop3=',disablepop3) FROM mail_user WHERE login = '[email protected]' Apr 12 23:10:04 servername authdaemond: password matches successfully Apr 12 23:10:04 servername authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/vmail, [email protected], fullname=<null>, maildir=/var/vmail/domain.com/test, quota=0, options=disableimap=n,disablepop3=n Apr 12 23:10:04 servername authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/vmail, [email protected], fullname=<null>, maildir=/var/vmail/domain.com/test, quota=0, options=disableimap=n,disablepop3=n Right after the "Authenticated" line the output stops. There is no other message. And in no other log file I've checked I could find any other related message. The system was updated from Ubuntu 10.10 to 12.04. How could I get more information? Or does anybody have an idea what could go wrong here?

    Read the article

  • Cannot browse ipv4 websites (OpenVPN )

    - by user1494428
    I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is when I'm connected to the vpn, I can only browse websites which support ipv6 like google. Ipv4 sites aren't loading (no error, just waiting indefinitely). http://whatismyv6.com/ reports me that I've an ipv6 address, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

    Read the article

  • How to fix Quicktime video color problems on nVidia chipset and Windows XP?

    - by Matthew Glidden
    My laptop frequently plays video as if in very low-color mode. Though the sound remains clear, it looks terrible, showing only a few shades of red, blue, or yellow. (It's even worse than 8-bit color.) The problem doesn't happen consistently, so I'm looking for troubleshooting advice or known solutions. I use a Dell Latitude D620 laptop with Windows XP, on-board nVidia video chipset, Quicktime, and multiple monitors (laptop screen + VGA-connected LCD). Color problems happen in each application I tried, iTunes, a browser, and the Quicktime standalone player. It doesn't happen right after reboot, so could be from a sleep-wake cycle, or at least being on for an extended period. Google results suggest reinstalling nVidia drivers, which I've done several times with no change. I have found 2 workarounds. Reboot, sacrificing significant time and disrupting work In nVidia control panel, change color to 16-bit, and then back to 32-bit This happens with all video playback, so it's definitely not one corrupt file. I use workaround #2 consistently, but would love a longer-term solution.

    Read the article

  • Vista laptop 1 connects to network but Vista laptop 2 doesn't

    - by Jaips
    (Sorry if this is a dulipcate. I did a hunt but couldn't find matching question) We recently got a new router for our network (thomson TG585v8). It was already pre-configured by the ISP and was easy to setup. Both Vista laptops in this home network connected without trouble as well a iPod touch, all via wifi. In the last two days one of the laptops has been unable to connect cleanly to the network (connects as unidentified network). The other laptop, and iPod have not had any issues. I can't think of anything that has changed to make this happen now. I have rebooted the laptop and the router. I have updated the laptop wireless driver I have checked the laptop is set to automatically get IP I have logged into the router which correctly identifies all three wireless devices. The problem laptop connects via LAN without issue. Some things that may or may not matter: The problem laptop also sometimes uses a 3G dongle Both laptops use Windows Live Mesh to sync folders Laptop is usually set to go to sleep NB: it seems this is an intermittent issue, after an hour (since i noticed it) it seems to have fixed itself. Would love ideas though to solve this problem for good.

    Read the article

  • Can't access certain web sites - reset router, any ideas?

    - by IniTech
    EDIT: This problem was resolved by my ISP - had to do with damaged fiber in one of their locations. Thanks to everyone that helped. Not sure if this is the right site (I'm a StackOverflow user) so I thought I'd give it a shot. I'm having trouble connecting to certain sites on any of the 3 machines that are on my LAN. The following sites are returning "Problem Loading Page - The connection has timed out" Sourceforge.net CNet.com Microsoft.com OpenDNS.com even my company's webiste I was worried about possible malware/virus, but I don't think that is the case (given the inability to access my company's site and the fact that all 3 machines are having the same issues.) I've tried with IE8, FF, and Chrome I have reset my router (WRT54G) and my machine(s) multiple times. EDIT: It is also worth noting that this page spins constantly and no avatars show up (I'm assuming it is trying to access gravatar.com with no success.) EDIT: I have the same issues directly connected to the modem. So, any router config is probably not the issue I'm a programmer, not a network guy - any ideas?

    Read the article

  • Keyboard issue when using kitty+puttycyg but not when using putty or cygwin alone

    - by kamaradclimber
    I would like to use a unique way to use console on my windows setup. Previously I used putty for remote access to linux servers and cygwin to have unix-like tools on windows. Then I discovered kitty which is a patched putty and have added the puttycyg patch. It provides the same way to connect to remote and local console. However, there is a strange behavior using vim when connected to the local console (using the puttycyg patch) : keys display A/B/C/D and replace the current character by these letter. In insert mode it does replace the caracter, in normal mode, no modification is made to the document even if the caracter is displayed as replaced. For instance, when I type : fixed bug with product deleted I get : fixed bbug wiwith prprodudueleteted I have read a lot of questions about this type of issue 3, 4 and googled it but there is no answer that work for me. The issue is present only for the setup kitty+puttycyg patch : cygwin alone works perfectly (and putty alone works also for access to linux servers). Any help would be appreciated !

    Read the article

  • OpenWRT + OpenVPN client forwarding from lan to vpn not working

    - by Dariusz Górecki
    I've OpenWRT router with Backfire 10.03.1-rc3 (arch:brcm 2.6 kernel) I've set up an OpenVPN client connecting my router with workplace lan, and it works nicely, I can connect from router to networks (several) in workplace. My OpenVPN client uci-config looks like: config 'openvpn' 'stream_client' option 'nobind' '1' option 'float' '1' option 'client' '1' option 'reneg_sec' '0' option 'management' '127.0.0.1 31194' option 'explicit_exit_notify' '1' option 'verb' '3' option 'persist_tun' '1' option 'persist_key' '1' list 'remote' 'remote.address.cutted' option 'ca' '/lib/uci/upload/cbid.openvpn.stream_client.ca' option 'key' '/lib/uci/upload/cbid.openvpn.stream_client.key' option 'cert' '/lib/uci/upload/cbid.openvpn.stream_client.cert' option 'enable' '1' option 'dev' 'tun1' I've set the 'STREAM_VPN' Zone to allow in/out traffic, and I've added rules for zone-to-zone lan<-vpn and vpn<-lan config 'zone' option 'name' 'stream_vpn' option 'network' 'stream_vpn' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'forwarding' option 'src' 'lan' option 'dest' 'stream_vpn' config 'forwarding' option 'src' 'stream_vpn' option 'dest' 'lan' And interface config: config 'interface' 'stream_vpn' option 'proto' 'none' option 'ifname' 'tun1' option 'defaultroute' '0' option 'peerdns' '0' Now, from my router everything works nicely, the problem is that I cannot connect from computer inside a lan to hosts in networks provided by vpn connection :/ What I've missed, or what I'm doing wrong? And how can I force using specified DNS when connected to vpn? (I know that sever should use PUSH DNS option, but is PUSHes only routes)

    Read the article

  • 530 5.7.1 Client was not authenticated Exchange 2010 for some computers within mask

    - by user1636309
    We have a classic problem with Client not Authenticated but with a specific twist: We have an Exchange 2010 cluster, let's say EX01 and EX02, the connection is always to smtp.acme.com, then it is switched through load balancer. We have an application server, call it APP01 There are clients connected to the APP01. There is a need for anonymous mail relay from both clients and APP01. The Anonymous Users setting of the Exchange is DISABLED, but the specific computers - APP01 and clients by the mask, let's say, 192.168.2.* - are enabled. For internal relay, a "Send Connector" is created, and then the above IP addresses are added for the connector to allow computers, servers, or any other device such as a copy machine to use the exchange server to relay email to recipients. The problem is that the relay works for APP01 and some clients, but not others (we get "Client not Authenticated") - all inside the same network and the same mask. This is basically what we do to test it outside of our application: http://smtp25.blogspot.sk/2009/04/530-571-client-was-not-authenticated.html So, I am looking for ideas: What can be the reason for such a strange behaviour? Where I can see the trace of what's going on at the Exchange side?

    Read the article

  • Is Gmail Being Blocked by my ISP (wait till you read this)?

    - by James
    This is the strangest thing I have ever encountered. I have a desktop on which I cannot access Gmail and also youtube sign in (I believe since youtube is owned by google they both use the same sign in system). So okay, maybe my ISP is blocking these for some reason or maybe my firewall is, or maybe there is something wrong with my connectivity, right? NO. On other computers that uses the same connection via a wireless router I can access both gmail and youtube sign in just fine. On this computer which doesn't have a wireless card and so I have to connect via Ethernet cable (connected to a USB converter since the Ethernet port doesn't work anymore) I can access all sites and services including things like aol and hotmail. But only when it comes to gmail, do I get complete and utter throttling. I even turned off my AV ad Firewall momentarily and no luck. The gmail ages starts to load and by mid point it just stays there loading and loading and loading... never ends. I tried everything, I reset the modem and router multiple times. I reinstalled my operating system from a vista to a windows 7 hoping a complete reinstall would solve the issue, but no luck. So can anyone for the life of them figure out why this could be? And yes, I am going to call my ISP but not to solve this issue, but to cancel them. I want to upgrade to cabel from DSL anyway. I didn't mention my ISP because I'm not sure if that is within the rules (if it's okay some one let me know and I will). P.S. All this happened one day, before gmail was perfectly accessible in this computer. I can't remember anything special that happened on that day prior to this. The only thing I can think of is, my ISP or Google itself is blocking this computer based on it's mac address, but I don't know if that's even done. Additional info: PC: Windows 7 Ultimate 32 bit Connection Type: DSL Connecting Medium: Ethernet cable via USB converter

    Read the article

  • OpenVPN (Tunnelblick) Suddenly Dropping Constantly

    - by Jeremy Privett
    I've been using Tunnelblick on my Mac for OpenVPN for about a year now. All of a sudden, this morning, it decided that it was going to take a nasty turn for the worse with no explanation. Here are the symptoms I'm seeing: I can connect to the VPN fine, initially. After about 2 - 5 minutes of no interruption, the connection suddenly dies. I can still see the VPN route using netstat -rn, and Tunnelblick believes it's still connected. No VPN traffic can go through and I can't even ping the VPN gateway. Eventually, Tunnelblick will catch on that the connection has died (usually about 5 - 10 minutes later) and shoot itself to restart and then the cycle starts over again. I've tried everything I can think of to figure this one out. I've completely flushed my system by rebooting and removing Tunnelblick and all traces of OpenVPN from my system and re-installing from scratch. No dice, same problem. I'm at my wits end, because I desperately need to get this fixed as the VPN is required for me to be able to do my job. Any ideas you have would be greatly appreciated.

    Read the article

  • MySQL extension of PHP not working

    - by Víctor
    In a Debian server, and after intallation and removal of SquirrelMail (with some downgrade and upgrade of php5, mysql...) the MySQL extension of PHP has stopped working. I have php5-mysql installed, and when I try to connect to a database through php-cli, i connect successfully, but when I try to connect from a web served by Apache I cannot connect. This script, run by php5-cli: echo phpinfo(); $link = mysql_connect('localhost', 'user, 'password'); if (!$link) { die('Could not connect: ' . mysql_error()); } echo 'Connected successfully'; mysql_close($link); Prints the phpinfo, which includes "/etc/php5/cli/conf.d/mysql.ini", and also the MySQL section with all the configuration: SOCKET, LIBS... And then it prints "Connectes successfully". But when run by apache accessed by web browser, it displays the phpinfo, which includes "/etc/php5/apache2/conf.d/mysql.ini", but has the MySQL section missing, and the script dies printing "Fatal error: Call to undefined function mysql_connect()". Note that both "/etc/php5/cli/conf.d/mysql.ini" and "/etc/php5/apache2/conf.d/mysql.ini" are in fact the same configuration, because I have in debian the structure: /etc/php5/apache2 /etc/php5/cgi /etc/php5/cli /etc/php5/conf.d And both point at the same directory: /etc/php5/apache2/conf.d -> ../conf.d /etc/php5/cli -> ../conf.d Where /etc/php5/conf.d/mysql.ini consists of one line: extension=mysql.so So my question is: why is the MySQL extension for PHP not working if I have the configuration included just in the same way as in php-cli, which is working? Thanks a lot!

    Read the article

  • Hard drive spark, can it be recovered?

    - by user163558
    Alright, so I was going to install Source Film Maker but I didn't have any space, so I decided to connect an HDD via an USB converter(image below). I shut down the machine, turned the PSU off, and connected via a Molex connector & the USB converter. I turned back on the PSU, no sparks or anything, everything normal, but when I turned on the machine, I heard some sizzing(lol?) and sparks flying and a little flame, but the PC was running fine. I pressed the power button instead pulling out the plug (I panicked) so it continued to short circuit for about 10 seconds. There's a very little part on the HDD that become ash, it's near the Molex connector and the circuit is a little black as well. I'm afraid that I will damage the HDD more so I didn't hook up the HDD after all. Do you think it's the PSU(came default with Cooler Master Elite 430, 500W) or it's the HDD(Samsung SP1203N)? P.S: I've attached the HDD same way before(like 3 months ago), and it worked. HDD burn: USB connector: Sorry for the bad image quality, taken with my phone.

    Read the article

  • Outlook certificate error and separate send/receive error

    - by Richard
    I run a laptop with Vista 32bit and MS Office 2010. Outlook has two profiles, both configured as POP3/SMTP and neither go through an exchange server. Recently, one of the mail servers (hosted with easily) was getting full, so I changed the profile setting to delete from the server if mails are older than 60 days. Suddenly, I am now experiencing a couple of glitches. The first is that I get a certificate error when outlook tries it's first send/receive under the relevant profile - "The server you are connected to is using a security certificate that cannot be verified" This continues despite apparently successfully re-importing the certificate. The second glitch is that I get a "Sending reported error (0x8004010F): 'Outlook data file cannot be accessed'" error on send receive. Strangely, it seems to be trying to send/receive twice - once to 'mail@domain', which works, and the second to 'domain' which doesn't. I've tried deleting the profile and re-creating it, pointing to the original .pst file, but still get both errors. Does anybody know how I can resolve these errors? (As a by note, and not that important, more for curiosity, does anybody know why simply changing the delete from server setting against that profile would cause these issues?)

    Read the article

  • How to extend a Linux PV partition online after virtual disk growth

    - by Yves Martin
    VMware allows to extend the size of a virtual disk online - when the VM is running. The next expected steps for Linux system are: extend the partition: delete and create a larger one with fdisk extend the PV size with pvresize use free extents for lvresize operations and then resize2fs for file system But I am stuck on the first step: fdisk and sfdisk still display the old size for the disk. My disk is a SCSI virtual disk connected thanks to the virtual LSI Logic controller. How to refresh the virtual disk size and partition table information available in Linux kernel without reboot ? As far as I know all that steps are possible for a running Windows, without reboot and even without any user actions thanks to VMWare tools. On Linux, I expects to do all steps online too and I already know steps 2, 3 and 4 work online. But the first one - change partition size declared in the partition table (still) seems to require a reboot. Update: My system is a Debian Lenny with kernel 2.6.26 and the disk I have extended is the main disk with a large PV containing the "root" LV for "/".

    Read the article

  • Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

    - by Slartibartfast
    I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

    Read the article

  • How to tell statd to use portmap on a non-localhost ipadress?

    - by jneves
    How can I make statd connect to other IP address other than 127.0.0.1? I have a server that is connected to 2 different networks (one is public, another a private). I want it to provide a NFS share for only the private network. The host in an ubuntu 8.04. The private ip address is 192.168.1.202 I changed /etc/default/portmap to add: OPTIONS="-i 192.168.1.202" The command lsof -n | grep portmap returns: portmap 10252 daemon cwd DIR 202,0 4096 2 / portmap 10252 daemon rtd DIR 202,0 4096 2 / portmap 10252 daemon txt REG 202,0 15248 13461 /sbin/portmap portmap 10252 daemon mem REG 202,0 83708 32823 /lib/tls/i686/cmov/libnsl-2.7.so portmap 10252 daemon mem REG 202,0 1364388 32817 /lib/tls/i686/cmov/libc-2.7.so portmap 10252 daemon mem REG 202,0 31304 16588 /lib/libwrap.so.0.7.6 portmap 10252 daemon mem REG 202,0 109152 16955 /lib/ld-2.7.so portmap 10252 daemon 0u CHR 1,3 960 /dev/null portmap 10252 daemon 1u CHR 1,3 960 /dev/null portmap 10252 daemon 2u CHR 1,3 960 /dev/null portmap 10252 daemon 3u unix 0xecc8c3c0 4332992 socket portmap 10252 daemon 4u IPv4 4332993 UDP 192.168.1.202:sunrpc portmap 10252 daemon 5u IPv4 4332994 TCP 192.168.1.202:sunrpc (LISTEN) portmap 10252 daemon 6u REG 0,12 289 3821511 /var/run/portmap_mapping I defined in /etc/hosts the following: 192.168.1.202 server.local In /etc/default/nfs-common I changed STATDOPTS to: STATDOPTS="--name server.local" Yet when I run /etc/init.d/nfs-common start if fails to start. The log shows: Jun 8 06:37:44 cookwork-web1 rpc.statd[9723]: Version 1.1.2 Starting Jun 8 06:37:44 cookwork-web1 rpc.statd[9723]: Flags: Jun 8 06:37:44 cookwork-web1 rpc.statd[9723]: unable to register (statd, 1, udp). An strace -f rpc.statd -n server.local results in a lot of lines, including this one: sendto(9, "\200]3\362\0\0\0\0\0\0\0\2\0\1\206\240\0\0\0\2\0\0\0\1"..., 56, 0, {sa_family=AF_INET, sin_port=htons(111), sin_addr=inet_addr("127.0.0.1")}, 16) = 56

    Read the article

  • Cannot access server shares over VPN

    - by DuncanDavies
    I've set up a single hosted server to use as a development environment for a web-based application. The web app is served up fine on port 80, however I'm struggling to get my VPN to behave how I'd expect so the developers don't have the access they require. The VPN connects fine and I can access the back-end database (SQL Server) which resides on the server with the client tools from the laptops. However they cannot access any shared folders. The server's local IP address is 10.x.x.x, and I've assigned a static IP address pool to RRAS (of 192.168.100.1 - 20). The clients pick up a valid IP Address (i.e. 192.168.100.9) when they connect. There is no name resolution setup, DNS or WINS. When connected via VPN the clients can ping the server (192.168.100.1) by IP Address, but cannot map a drive to a shared folder (net use * \\192.168.100.1\xxxxx) - I get 'System error 53 has occurred. The network path was not found.' I don't understand why I can ping by the ip, but not map by it. Some details: Server OS is Windows 2008 (Datacenter) VPN is SSTP using RRAS Clients are all Windows 7 I've tried temporarily disabling the firewalls So, why can we not access the file system when everything else (ping, RDP, SQL Server clients tools) works? Thanks for your help Duncan

    Read the article

  • Using a Level 2 switch as a core switch

    - by imtech
    I have a small user base of about 20 people on at a time and spiking up to about 80 people during peak times. Most people (80+%) are connected over our Aruba managed wireless system. We have a Windows Domain. We have 3 24-Port switches all connecting back to a central 48-port switch where additional access ports, firewall, servers, and wireless controller all centrally connect back to. It's a flat network with dumb switches. I'm in the process of upgrading our infrastructure. Cisco pricing for switches is pretty high for us so I've been looking at HP Procurves which seem to be within our budget range. I want to eventually make use of 802.1x, SNMP, QoS for possible VOIP upgrades, VLAN to separate guest VLAN from authenticated users, and other more advanced features. PoE would be nice but that's probably too expensive for us. I was thinking of having our core switch be a Procurve 2610 and the rest of our switches that centrally connect to it be Procurve 2510s. A true and full blown level 3 switch is way out of our price range but a 2610 seems to be good enough for us. The 2610 does static routing which ought to be good enough for us but I'm in unfamiliar territory so I'm looking for any gotchas. Also, should all the switches be 2610s or just the core switch? Do I even need the 2610, can I just go with all 2510s? I'm new to VLANs as well so I'm not sure what it is I need but I would like an affordable infrastructure that won't need replacing 2-3 years down the line because I choose a product that was lacking.

    Read the article

  • Which events specifically cause Windows 2008 to mark a SAN volume offline?

    - by Jeremy
    I am searching for specific criteria/events that will cause Windows 2008 to mark a SAN volume as offline in disk management, even though it is connected to that SAN volume via FC or iSCSI. Microsoft states that "A dynamic disk may become Offline if it is corrupted or intermittently unavailable. A dynamic disk may also become Offline if you attempt to import a foreign (dynamic) disk and the import fails. An error icon appears on the Offline disk. Only dynamic disks display the Missing or Offline status." I am specifically wondering if, on the SAN, changing the path to the disk (such as the disk being presented to the host via a different iSCSI target IQN or a different LUN #) would cause a volume to be offlined in disk management. Thanks! Edit: I have already found two reasons why a disk might be set offline, disk signature collisions and the SAN disk policy. Bounty would be awarded to someone who can find further documented reasons related to changes in the volume's path. Disk signature collisions: http://blogs.technet.com/b/markrussinovich/archive/2011/11/08/3463572.aspx SAN disk policy: http://jeffwouters.nl/index.php/2011/06/disk-offline-with-error-the-disk-is-offline-because-of-a-policy-set-by-an-administrator/

    Read the article

  • How to auto mark tape as free in DPM 2012?

    - by Massimo
    I have a backup server running System Center Data Protection Manager 2012, connected to a couple of tape drives (no library). I also have, of course, some tapes. Tape rotation is manual. The tape have been used before, by DPM itself (but the server has been completely rebuilt) and by other backup softwares; they are not emtpy. But they contain no data that DPM knows and/or wants to preserve, so they can be marked as free without having to run forcefreetape.ps1. When a tape is placed into the drive, it is required to perform an inventory, have it recognized as an imported tape and then mark it as free; otherwise DPM will simply refuse to use it. How can I tell DPM to automatically treat those imported tapes as free? And, of course, I do not want to reuse real backup tapes if by chance they get put into the drives before their expiration date, so the solution should mark imported tapes as free, but should not do the same with real, non-expired tapes.

    Read the article

  • Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

    - by Wesley
    Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

    Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >