Search Results

Search found 11142 results on 446 pages for 'incognito mode'.

Page 243/446 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• dd clone hard drive: Input/Output Error though "chkdsk" says OK

  - by unknown (google)

  Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

  Read the article

• php-fpm start error

  - by Sujay

  I am using php-fpm. I recently recompiled php for including imap functions. But on php-fpm start it gives the following error: Starting php_fpm Error in argument 1, char 1: no argument for option - Usage: php-cgi [-q] [-h] [-s] [-v] [-i] [-f ] php-cgi [args...] -a Run interactively -C Do not chdir to the script's directory -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse . Implies `-q' -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -q Quiet-mode. Suppress HTTP Header output. -s Display colour syntax highlighted source. -v Version number -w Display source with stripped comments and whitespace. -z Load Zend extension ................................... failed What could be the problem? Is it in php-fpm.conf or php.ini.

  Read the article

• In what way does non-"full n-key rollover" hinder fast typists?

  - by Michael Kjörling

  Wikipedia claims (although the latter claim does not cite a source) that: High-end keyboards that provide full n-key rollover typically do so via a PS/2 interface as the USB mode most often used by operating systems has a maximum of only six keys plus modifiers that can be pressed at the same time.[4] This hinders fast typists, ... In what way would the system being able to recognize only six non-modifier keys at once hinder a fast typist? I consider myself a relatively fast typist and I usually press one key, plus modifiers, at once; I can't imagine any real-life situation in which the system only recognizing six non-modifier keys being pressed at once has been a limiting factor in my keyboard usage. (Multi-stroke keyboard shortcuts as used by high-end software like Visual Studio, Emacs and the like are a different matter.) Note that I am not really interested in answers centered around multiplayer computer games; I'm looking for answers that give reasons that would be relevant to typists, somehow supporting the statement made on Wikipedia.

  Read the article

• Can't get any SMART or temperature data from HDDs

  - by Regs

  I have a PC with recently installed Gigabyte GA-X79-UD5 MB. I've encountered some weird problem with getting SMART data or temperature for HDDs. Every single tool I've tried in Windows 7 just can't get any data (HDTune, AIDA64...). I was suspecting that SMART feature is disabled in BIOS but it's seems like there is no such option in BIOS settings. I've even tried to update BIOS but still no luck. Same issue with both controllers on that MB (Intel and Marvell). It seems unlikely that both controllers end up with exact same issue. Both controllers are working in AHCI mode. Is there anythig that can interfere with getting SMART ant temp data from HDDs? Or is there any way to check that it's actuall MB issue? Is it even possible that it is hardware issue since all HDDs seems to work normal despite the fact that I can't get any temperature or SMART data from it.

  Read the article

• How to protect an OS X Server from an anautorized physical connection?

  - by GJ

  Hi I have an OS X 10.6 server, which I administer via SSH and VNC (via SSH tunnel). I can't leave it at the login window since then VNC connections are refused. Therefore I currently leave it logged with my user account. Since it doesn't have a monitor attached, it doesn't go into screen saver mode, which means it doesn't require a password to retake control. This means it is very easy for anyone connecting a keyboard/mouse and monitor to take control of the system. The screen saver password protection, which I can't get to activate, unlike the system's login window, is perfectly compatible with VNC connections. How could I prevent such direct access to the server without connecting a monitor and without blocking my ability to connect with VNC? Thanks!

  Read the article

• What prevents Windows from entering standby?

  - by Arne

  Is there a tool or method to find out, what prevents Windows Vista 32 bit from entering the standby mode? My home pc is set to standby after a certain time of inactivity. But quite often it just stays awake and I have know idea why. I know of things that will keep it awake and already checked devices and network to no avail. I suspect there is some application or service that tells the os to stay active and I hope there is some tool to find the culprit.

  Read the article

• gnu coreutils split verbose flushed?

  - by 130490868091234

  When using the GNU coreutils split command with verbose mode, how can I make the lines that appear in the STDOUT be flushed with respect to the time when the file has finally been created? Fore example, running it like this: ~/coreutils/bin/split --verbose -d -u -l 10000000 1>out & tail -f out creating file `x00' creating file `x01' creating file `x02' [...] I would have expected the line creating file 'x00' to have appeared in file out after the file has been completely written, but instead, it seems like nothing is written into out until the whole file has been finally processed. Is there a way to change this behavior?

  Read the article

• Screen multiuser - Permission denied

  - by Zlug

  I'm trying to send input to a screen session from php. So far I have followed the steps explained here Is running GNU Screen suid root the only way to make multiuser mode work? And I have set "multiuser on" and "acladd www-data" in the screenrc file (or well, no. in another file that I use by the -c option but still) My problem now is that whenever i try to acess screen by php exec('screen -S user/session -p 0 -X stuff "test"'."\n", $ret); I get the error: Cannot opendir /var/run/screen/S-user: Permission denied

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

  - by Nakedible

  I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

  Read the article

• How can I fix my WRT54GL's constant crashing?

  - by Aarthi

  I have a Linksys WRT54GL wireless router (the old blue-and-black) whose underside indicates it is Version 2. I've noticed that, on wireless mode, if I am on a Skype call or in a Google Hangout, the wireless aspect will crash completely. In addition, if I am connected via an ethernet cord, my quality (that is, how my voice is received) tanks very quickly. I suspect this is due, in part, to my internet connectivity itself (I'm on Comcast instead of Verizon FiOS, as I'd prefer) but I'd like to stop my wireless router's wireless capability from crashing. I considered a firmware upgrade, but it looks to me as if I am upgraded. Short of manually running ethernet all over my house, I'm not sure what to do. How can I solve my wireless router's issues? If the answer is "buy a new router," then that's valid, as well, in my opinion.

  Read the article

• Dell Inspiron/Windows Vista sleep/hibernate issue

  - by sarge

  When I hit the sleep button in Windows the computer looks like it's going into Sleep mode but a few seconds later it's restarted, and stops with this error message: internal hard disk drive not found To resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics. The computer is running Windows Vista (SP2) and I have installed all available Windows Updates and the latest manufacturer drivers. I have already tried to reseated the drive, ran the onboard diagnostics and there were no errors. I have changed the power settings for all devices where it's available so that they are not allowed to wake up the computer. Any ideas?

  Read the article

• How to install the TRIM RAID update for the Intel storage controller?

  - by Mike Pateras

  I just found this article, that says that Intel now supports TRIM for SSDs when the Intel storage controller is in RAID mode. It links to this download page. I'm pretty excited about that, but I'm a little confused. There seem to be two sets of drivers, an executable and something that's bootable. I ran the executable. Is that just to apply the drivers to my system now, and are the bootable drivers so that if I re-format, I won't have to re-run everything? Do I need to do both? And is there a way to check if it worked? I'm running an i7 in Windows 7 (ASUS P6T Deluxe Motherboard) with RAID 0, if that's significant.

  Read the article

• FTP issue - VSFTPd and connecting to from FileZilla

  - by B Tyndall

  I'm trying to connect to a CentOS Linux box that I have hosted on EC2 and I think I have everything configured correctly but when I try to connect I get this series of messages Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.0.5) Command: USER tyndall Response: 331 Please specify the password. Command: PASS ********* Response: 230 Login successful. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/tyndall" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing Not sure where to start troubleshooting this issue. Any ideas? Do I need to change any permissions? I would think this ID has the ability to see my own home directory. I am able to push/pull files from the command line version of FTP client working on Windows.

  Read the article

• How to protect an OS X Server from an unauthorized physical connection?

  - by GJ

  Hi I have an OS X 10.6 server, which I administer via SSH and VNC (via SSH tunnel). I can't leave it at the login window since then VNC connections are refused. Therefore I currently leave it logged with my user account. Since it doesn't have a monitor attached, it doesn't go into screen saver mode, which means it doesn't require a password to retake control. This means it is very easy for anyone connecting a keyboard/mouse and monitor to take control of the system. The screen saver password protection, which I can't get to activate, unlike the system's login window, is perfectly compatible with VNC connections. How could I prevent such direct access to the server without connecting a monitor and without blocking my ability to connect with VNC? Thanks!

  Read the article

• Vista won't boot - just get black screen

  - by DisgruntledGoat

  When I boot into Windows Vista (Ultimate), I just get a black screen (with the mouse visible and working). If I run in safe mode, it seems to pause for a while when loading crcdisk.sys. A lot of research says it could be a problem with the hard drive, but I dual boot Ubuntu and that works fine and I can still see and use the Windows partition absolutely fine from Ubuntu. I tried using the "startup repair" option on the Vista install disk but it didn't detect any problems. I have run chkdsk several times, with this: chkdsk C: /f /r And also drive D (the recycle bin). The first two times it detected and fixed errors on the C drive but now it doesn't detect any errors. Is there anything else that could be causing this problem?

  Read the article

• 1Gigabit vs 1.25Gibabit mismatch

  - by Joel Coel

  I need to re-connect the network to a small old outbuilding that hasn't been used in several years. I have to use the existing 62.5um multi-mode fiber run. This end of the fiber is already connected. For the end in the building, I was looking at this pair: http://www.tp-link.com/products/productDetails.asp?class=switch&content=spe&pmodel=TL-SM311LM http://www.tp-link.com/products/productDetails.asp?class=&content=spe&pmodel=TL-SL2210WEB If you look at the sfp first (first link), it's listed at 1.25Gpbs. That's odd, because IIRC the fiber should really only do 1Gbps. It's also supposed to work with the switch I posted (2nd link), but the gbic port on the switch also only shows 1Gbps. What am I missing here?

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• After repairing permissions, Mac OS X won't boot

  - by Power-coder

  This morning I ran the Repair Permissions command from inside the Disk Utility. Ever since then my MacBook wont move past the splash screen when booting. I've revolted in verbose mode and I see that it is trying to repair the disk but then terminates with 'Unable to repair the volume'. Since then I have tried running the Disk Repair from the Snow Leopard install DVD and it quits with the same error. Is there a way I can repair this thing without reformatting and installing over again? How does something so simple as a permissions repair make the system unbootable like this?

  Read the article

• Win2008 DC in a Windows 2000 domain: can I keep the old DC?

  - by gravyface

  Will be putting a new Windows 2008 SE Server into a single domain network with two domain controllers, both running Windows 2000 Server. The functional level of the domain is mixed mode/2000. Until a second 2008 DC can be purchased, I'd like to leave the current Win2k operational master DC as a backup DC as the other member servers running 2003 have either accounting/SQL or Exchange on them. Eventually all the w2k servers will be decommissioned, but until then, I need another DC for redundancy. Following the standard process for adding a new DC, can I leave the old operational master DC (or the other backup DC) running after I transfer the FSMO roles to the new server? Will this cause any issues?

  Read the article

• Windows 2000 under Windows 7 Virtual PC not working correctly

  - by dave

  I have just moved my Windows 2000 Virtual PCs from Vista to Windows 7 Professional (64-bit). The machines work to a point but I have found some problems: drive mapping does not seem to work any more. I need this to exchange data. I do not need network access to the virtual PC so would rather leave it unconnected. the virtual PC would automatically shutdown the session and go to the login screen after a few minutes of inactivity. I tried installing the Virtual PC Integration Components but the install failed (one of the messages basically says it's XP+ only). Now I'm stuck in 640x480 mode with mouse capture. I have heard that you can install an older version of the Integration Components but this sounds a bit suspect. Does anyone have any ideas on how to get Windows2000 working with drive sharing on a Virtual PC?

  Read the article

• Can I run AD commands from a standard PowerShell script?

  - by Ben

  I am putting together a script to run post-sysprep. It should check if the machine is on the network, and if it is then it should query AD to see if a computer account exists with it's service tag (we're using these as the hostnames of the machines.) If it does exist, it should delete the account and rejoin the machine to the domain. I have got the majority of the script running, but need to run the following: Remove-ADComputer -Identity $distinguishedName How can I run this from the "standard" powershell environment? I don't want to use the AD module. (By the way - I'm on a mixed mode 2000/03 domain as we are in the process of upgrading to 2008) I'm new to PowerShell so be gentle if I'm completely missing the point! Thanks, Ben

  Read the article

• Barcode scanner work in browser

  - by JP Hellemons

  I have a Manhattan Barcode scanner Contact CCD Handheld 80mm scan width, USB. I have connected it to Windows 7 x64. I managed to get it to scan several barcodes by configuring it to USB Mode. If I open up Notepad it scans and displays the barcodes correctly. But when I set the cursor in a textbox in my browser (IE9 beta, Firefox 3.6 or Chrome 8.0 beta), it scans correctly but opens the download dialog afterwards. This gets triggered by CTRL+J normally.... What did I do wrong? I tried several barcodes (Code128 and several others) and tried different browsers and Notepad. it works in Notepad but doesn't in the browsers...

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• How do I share a complete XP disk so it can be seen from a Windows 7 system?

  - by Ian Ringrose

  This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >