Search Results

Search found 17981 results on 720 pages for 'input redirection'.

Page 243/720 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

  • Is it possible to run two separate instances (copies, versions) of Audacity?

    - by cipricus
    What I want is two separate instances of Audacity running in parallel as to separate programs with different settings. I want one to use WASAPI as audio host and speakers as input device (the 2.0.5 portable has the WASAPI option), and the other to use the MME as audio host, and microphone as input device. When opening a new (second) window of the same installation/copy of Audacity, by executing twice the .exe file, it is the same as giving the command 'new' under 'File', what happens is not a second instance, but just a separate project/file and window. When settings are changed in one, they change exactly in the other. When trying to start a second copy of Audacity, or even a second different version, when one is already running, it will also open just a second project/file of the application that is already running, as before.

    Read the article

  • SSL certificate for ISAPI redirected Web Site

    - by Daniel
    I have a Win 2003 server and I'm using Ionics Isapi Rewrite Filter to redirect requests made to a Web Site configured in IIS to another Apache2 Server in a server not exposed to the Internet. The Web Site has its host headers configured to catch requests for the specific site, and the redirection is being done with the ProxyPass directive. This is working OK. So far the scenario, my question is: I'd like to add a server certificate to the Apache server, but I don´t know if I need to add the certificate to both Apache and IIS sites. I think I still don´t get the theory behind this and would like to know from someone with expertise in the field the right way to implement this. Thank you in advance.

    Read the article

  • How to make Xbox joypad work with Bastion?

    - by Alistair Buxton
    I have an XBox joypad: Bus 005 Device 004: ID 045e:0289 Microsoft Corp. Xbox Controller S When I start Bastion from the terminal the following is output: Number of joysticks: 1 Number of buttons for joystick: 0 - 10 Number of axes for joystick: 0 - 6 Number of PovHats for joystick: 0 - 1 When I load up the game it displays a message "press any key" and at this point, if I press a button on the joypad it advances to the main menu. However, the up/down/left/right controls do not work and the button will not operate the menu. When I enter the control configuration, the joypad section is disabled and displays a message "joypad not detected." If I enter the control customization and try to reconfigure one of the controls, noises can be heard when pressing joypad buttons, but the input is otherwise ignored. Further information which may or may not be relevant: My controller is an original Xbox controller, not a 360 controller. XNA games on Windows apparently only work with Xbox360 controllers because they use xinput rather than direct input, see eg here. My controller works (almost) properly with MonoGame trunk samples, but Bastion uses a modified MonoGame and crashes when run against trunk, so I can't add debugging to see where the problem is. Bug can also be reproduced with a Xbox 360 wired controller.

    Read the article

  • lucid 10.04 LTS => Precise 12.04.1 : upgrade doesn't work

    - by Rastom
    I googled and looked into all unkown issues on ubuntu forums but I can't figure out why a 10.04 LTS server won't detect the last LTS 12.04.1. I guess since 12.04 is a fresh dist, not much is reported for related issues Here is what I did : apt-get update apt-get upgrade apt-get install update-manager-core it was already installed so no update for this package. I checked : /etc/update-manager/release-upgrades [DEFAULT] # Default prompting behavior, valid options: # # never - Never check for a new release. # normal - Check to see if a new release is available. If more than one new # release is found, the release upgrader will attempt to upgrade to # the release that immediately succeeds the currently-running # release. # lts - Check to see if a new LTS release is available. The upgrader # will attempt to upgrade to the first LTS release available after # the currently-running one. Note that this option should not be # used if the currently-running release is not itself an LTS # release, since in that case the upgrader won't be able to # determine if a newer release is available. Prompt=lts I also checked my sourcelist before running apt-get : /etc/apt/sources.list deb http://archive.ubuntu.com/ubuntu/ lucid main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ lucid-updates main restricted universe multiverse deb http://security.ubuntu.com/ubuntu lucid-security main restricted deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted deb http://security.ubuntu.com/ubuntu lucid-security universe deb-src http://security.ubuntu.com/ubuntu lucid-security universe deb http://security.ubuntu.com/ubuntu lucid-security multiverse deb-src http://security.ubuntu.com/ubuntu lucid-security multiverse # deb http://landscape.canonical.com/packages/hardy ./ # deb-src http://landscape.canonical.com/packages/hardy ./ and then following Ubuntu guide for Precise upgrade the command below should work : root@xxxxxxxxx:/etc/apt# do-release-upgrade -d Checking for a new ubuntu release No new release found So am I missing something ? The server was accessing outside through a proxy but I grant direct access to this server to avoid any Internet access problem or redirection but no clue... Any help would be appreciated

    Read the article

  • Can I send some text to the STDIN of an active process running in a screen session?

    - by Richard Gaywood
    I have a long-running server process inside a screen session on my Linux server. It's a bit unstable (and sadly not my software so I can't fix that!), so I want to script a nightly restart of the process to help stability. The only way to make it do a graceful shutdown is to go to the screen process, switch to the window it's running in, and enter the string "stop" on its control console. Are there any smart redirection contortions I can do to make a cronjob send that stop command at a fixed time every day?

    Read the article

  • Error mounting: mount exited with exit code 13

    - by Mike Williamson
    I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

    Read the article

  • Will my laptop be ok with this different laptop charger?

    - by tidbits
    So the original laptop charger broke and I switched to a charger from a laptop that I no longer use. The specifications from each are: Original Input:AC 100-240V 1.5A 50-60Hz Output: DC 19V 3.42A Other Charger Input: AC 100-240V 1.5A 50-60Hz Output: 20V 3.25A Yes, the polarity is the same. Also, the wattage has a difference of .02 from what I understand. Is wattage ever important, and more specifically, a wattage difference of that size. Feel free to ask me any other questions about the chargers and I'll answer them to the best of my ability.

    Read the article

  • How to redirect the output of the vmrun listProcessesInGuest command on windows?

    - by mark
    I run vmrun.exe with listProcessesInGuest on the command line and get the list of processes displayed in the console window. The exact command line is: "C:\VIX\vmrun.exe" -T vc -h "https://myserver/sdk" -u "mydomain\myuser" -p 123 -gu Administrator -gp 123 listProcessesInGuest "[Storage1] QA-W-7-SP1-64-0/QA-W-7-SP1-64-0.vmx" It works fine. Now I wish to redirect the output, however, neither 2> nor 1> work! The former has no effect - the output is still displayed in the console window, so I conclude it is send to stdout. But the latter does not work too - now nothing is displayed in the console window, but the redirection file is empty! It is created all right, but it has the zero size! Can someone explain what is going on?

    Read the article

  • Phishing attack stuck with jsp loginAction.do page?

    - by user970533
    I'm testing a phishing website on a staged replica of an jsp web-application. I'm doing the usual attack which involves changing the post and action field of source code to divert to my own written jsp script capture the logins and redirect the victim to the original website. It looks easy, but trust me, it's has been me more then 2 weeks and I cannot write the logins to the text file. I have tested the jsp page on my local wamp server it works fine. In staged, when I click on the ok button for user/password field I'm taken to loginAction.do script. I checked this using the tamper data add-on on Firefox. The only way I was able to make my script run was to use burp proxy intercept the request and change action parameter to refer my uploaded script. I want to know what does an loginAction.do? I have googled it - it's quite common to see it in jsp application. I have checked the code; there is nothing that tells me why the page always points to the .do script instead of mine. Is there some kind of redirection in Tomcat? I like to know. I'm unable to exploit this attack vector? I need the community's help.

    Read the article

  • Bluetooth Issues Ubuntu 13.10

    - by Eduardo
    I have a bluetooth headset which works perfectly on Ubuntu 13.04. Now I update to 13.10, and here is what's happing: After installing blueman, bluetooth-suport, pulseaudio-module-bluetooth and so on, I can find my device, pair it and connect to the headset service. But the device does not appear on the Sound Settings, so I just can't select it as input/output device. In other words, it's connected but "useless". So, searching around for solutions, I found a software called stream2ip. With this I can connect the device and it appears on the Sound Settings, the sound plays on the device as well, but I microphone does not work, even when selected on the settings, also the A2DP option still not working. Stream2ip isn't a solution at all, I mean everything was working without it in the previous Ubuntu version. Maybe I'm missing something, and I hope someone could give me any hint. And formally, the question: How can I get the A2DP output option and the input working again, on the Ubuntu 13.10? Thanks!

    Read the article

  • Convert swf file to mp4 file using FFMPEG

    - by user1624004
    I now want to show an html5 video on a html page. Now I have an sample.swf file, I want to convert it to .mp4 or .ogg or .webm file. I have tried: ffmpeg -i sample.swf sample.mp4 But I got this error: [swf @ 0000000001feef40] Could not find codec parameters for stream 0 (Audio: pcm_s16le, 5512 Hz, 1 channels, 88 kb/s): unspecified sample format Consider increasing the value for the 'analyzeduration' and 'probesize' options [swf @ 0000000001feef40] Estimating duration from bitrate, this may be inaccurate Guessed Channel Layout for Input Stream #0.0 : mono Input #0, swf, from 'sample.swf': Duration: N/A, bitrate: N/A Stream #0:0: Audio: pcm_s16le, 5512 Hz, mono, 88 kb/s Stream #0:1: Video: mjpeg, yuvj444p, 1024x768 [SAR 100:100 DAR 4:3], 16 fps, 16 tbr, 16 tbn File 'sample.mp4' already exists. Overwrite ? [y/N] y Invalid sample format '(null)' Error opening filters!

    Read the article

  • iptables dos limit for all ports

    - by user973917
    I know how to use limit conntrack option to allow for DoS protection. However, I want to add a protection to limit no more than say 50 connections for each port. How can I do this? Basically, I want to make sure that each port can have no more than 50 connections, rather than globally applying 50 connections (which is what #2 does I believe?) Would I do something like: iptables -A INPUT --dport 1:65535 -m limit --limit 50/minute --limit-burst 50 -j ACCEPT or iptables -A INPUT -m limit --limit 50/minute --limit-burst 50 -j ACCEPT

    Read the article

  • Server Firewall preventing sending of email [migrated]

    - by Jo Fitzgerald
    The firewall on my VPS appears to be preventing my site from sending email. It was working fine until the end of last month. My hosting provider (Webfusion) has been next to useless. I am able to send email if I open INPUT ports 32768-65535, but not if these ports are closed. Why would this be? I have the following rules in my firewall: # sudo iptables -L Chain INPUT (policy DROP) target prot opt source destination VZ_INPUT all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- anywhere anywhere Chain OUTPUT (policy DROP) target prot opt source destination VZ_OUTPUT all -- anywhere anywhere Chain VZ_FORWARD (1 references) target prot opt source destination Chain VZ_INPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssmtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpts:32768:65535 ACCEPT udp -- anywhere anywhere udp dpts:32768:65535 ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT udp -- localhost.localdomain localhost.localdomain Chain VZ_OUTPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere ACCEPT udp -- anywhere anywhere The VPS is running Plesk 10.4.4 (please ask if you require further technical information to help me)

    Read the article

  • "VLC could not read the file" error when trying to play DVDs

    - by stephenmurdoch
    I can watch most DVD's on my machine using VLC but today, I went to watch Thor, and it won't play. libdvdread4 and libdvdcss2 are at the latest versions. vlc -v returns 1.1.4 w32codecs are installed and reinstalled ubuntu-restricted-extras are same as above My machine recognises the disc and I can open the folder and browse the assorted .vob files, of which there are many. None of them will open in VLC, or in MPlayer etc. When I run vlc -vvv /media/THOR/VIDEO_TS/VTS_03_1.VOB I get: File Reading Failed VLC could not read the file I also see command line output like this: [0x963f47c] main filter debug: removing module "swscale" [0x963a4b4] main generic debug: A filter to adapt decoder to display is needed [0x964be84] main filter debug: looking for video filter2 module: 18 candidates [0x964be84] swscale filter debug: 720x576 chroma: I420 -> 979x551 chroma: RV32 with scaling using Bicubic (good quality) [0x964be84] main filter debug: using video filter2 module "swscale" ..... [0x959f4e4] main video output warning: late picture skipped (-10038 > -15327) [0x963a4b4] main generic debug: auto hidding mouse [0x93ca094] main input warning: clock gap, unexpected stream discontinuity [0x93ca094] main input warning: feeding synchro with a new reference point trying to recover from clock gap [0x959f4e4] main video output warning: early picture skipped ...... ac-tex damaged at 0 12 ac-tex damaged at 6 20 ac-tex damaged at 12 28 This happens with onboard and Known Good USB DVD player I don't have standalone DVD player to try with TV I am going to watch another film instead for now, because I can do that. I just can't watch THOR, and I'm pretty confident that the disc is ok. It is a rental, but it's clean and there are no surface abrasions. I even cleaned it with Christian Dior aftershave to make sure.

    Read the article

  • iCloud stuff stops working while connected to OpenVPN [closed]

    - by Taco Bob
    I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again!

    Read the article

  • Getting error when using Oracle imp command to import dmp file

    - by blizz
    I am importing a dmp file using the following command: imp user/pass file=file.dmp log=logfile.log full=y ignore=y destroy=y I get the following errors: . . importing table "MESSAGE_BOARD" IMP-00058: ORACLE error 22993 encountered ORA-22993: specified input amount is greater than actual source amount IMP-00028: partial import of previous table rolled back: 219638 rows rolled back . . importing table "MESSAGE_BOARD_ARCHIVES" IMP-00058: ORACLE error 22993 encountered ORA-22993: specified input amount is greater than actual source amount IMP-00028: partial import of previous table rolled back: 2477960 rows rolled back I have tried increasing the tablespace size and adding a second datafile to no avail. I'm a total newb at Oracle so any help will be appreciated. Googled this for hours and still can't come up with a solution. Thanks!

    Read the article

  • Setting the Timezone with an automated script

    - by Tom
    I'm writing scripts to automate setting up new slicehost installations. In a perfect world, after I started the script, it would just run, with no attention from me. I have succeeded, with one exception. How do I set the timezone, in a permanent (survive reboot) and sane (adjust for standard and daylight savings time, so no just forcing the date) ... manner that doesn't require input from me? Currently, I'm using dpkg-reconfigure tzdata This doesn't seem to have any way to force parameters into it. It demands user input. EDIT: I'm editing here, rather than commenting, since comments don't seem to allow code blocks. Here's the actual code I ended up with, based on Rudedog's comment below. I also noticed that this doesn't update /etc/timezone. I'm not certain who uses that, but in case anybody does, I'm setting that too. TIMEZONE="America/Los_Angeles" echo $TIMEZONE > /etc/timezone cp /usr/share/zoneinfo/${TIMEZONE} /etc/localtime # This sets the time

    Read the article

  • Mini DisplayPort -> DVI -> VGA ?

    - by ibz
    I have a Mini DisplayPort to DVI adapter which I use to connect my MacBook to a screen that has DVI input. I also have a screen with VGA only input which I want to be able to use, so instead of buying yet another expensive Apple adapter (the Mini DisplayPort to VGA), I just got a cheap DVI to VGA, so I can do Mini DisplayPort - DVI - VGA. It doesn't seem to work though. The screen just says "no connection". Does anyone know if this is actually supposed to work (and my DVI - VGA is just broken), or is this simply not supported and I need to get the expensive Apple Mini DisplayPort to VGA? Thanks!

    Read the article

  • passing data to php in ajax [closed]

    - by MertMETIN
    i try to pass my data, actually checkboxes has some datas in their ids, and i read try to read them. like that, <input align="right" type=checkbox name="checkArtist[]" class="checkClass" id ="{$movieId}-{$mCast.id}"></li> dont worry about {$movieId}-{$mCast.id} They are template lite tags. I successfully read checkboxes datas in ajax side. The problem is that i cannot send these datas to my php. var artistIds = new Array(); $(".p16 input:checked").each()(function(){ artistIds.push($(this).attr('id')); }); $.post('/json/crewonly/deleteDataAjax2', { 'artistIds': artistIds },function(response){ if(response=='ok') alert("ok"); }); above code is my ajax but in php side $artistIds is always empty. I found a topic in stackoverflow http://stackoverflow.com/questions/5571646/how-to-pass-a-javascript-array-via-jquery-post-so-that-all-its-contents-are-acce It says how to pass js arrays $.post('/url/to/page', {'someKeyName': variableName}); This is same with my code. What's going wrong ?

    Read the article

  • Game actions that take multiple frames to complete

    - by CantTetris
    I've never really done much game programming before, pretty straightforward question. Imagine I'm building a Tetris game, with the main loop looking something like this. for every frame handle input if it's time to make the current block move down a row if we can move the block move the block else remove all complete rows move rows down so there are no gaps if we can spawn a new block spawn a new current block else game over Everything in the game so far happens instantly - things are spawned instantly, rows are removed instantly etc. But what if I don't want things to happen instantly (i.e animate things)? for every frame handle input if it's time to make the current block move down a row if we can move the block move the block else ?? animate complete rows disappearing (somehow, wait over multiple frames until the animation is done) ?? animate rows moving downwards (and again, wait over multiple frames) if we can spawn a new block spawn a new current block else game over In my Pong clone this wasn't an issue, as every frame I was just moving the ball and checking for collisions. How can I wrap my head around this issue? Surely most games involves some action that takes more than a frame, and other things halt until the action is done.

    Read the article

  • Bluetooth headset A2DP works, HSP/HFP not (no sound/no mic)

    - by Stefan Armbruster
    My Philips SBH9001 headset pairs fine using Ubuntu 12.04. In the audio settings it's properly detected as A2DP device and as HSP/HFP device. Hardware: Thinkpad X230, Ubuntu 12.04 64bit, Kernel 3.6.0-030600rc3-generic (build from Ubuntu mainline repo), Bluetooth device is USB-Id 0a5c:21e6 from Broadcom, Headset is a Philips SBH9001. Note: Kernel 3.6 rc3 is used because of a fix for audio on the dockingstation that is not in any previous branches. Playing audio in A2DP works just fine out of the box, but when switching the headset to HSP/HSP mode there is no sound nor does the microphone work. When connecting the headset, /var/log/syslog shows: Aug 25 21:32:47 x230 bluetoothd[735]: Badly formated or unrecognized command: AT+CSRSF=1,1,1,1,1,7 Aug 25 21:32:49 x230 rtkit-daemon[1879]: Successfully made thread 17091 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:32:49 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:32:50 x230 kernel: [ 4860.627585] input: 00:1E:7C:01:73:E1 as /devices/virtual/input/input17 When switching from A2DP (standard profile) to HSP/HFP: Aug 25 21:34:36 x230 bluetoothd[735]: /org/bluez/735/hci0/dev_00_1E_7C_01_73_E1/fd3: fd(34) ready Aug 25 21:34:36 x230 rtkit-daemon[1879]: Successfully made thread 17309 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:34:36 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:34:41 x230 bluetoothd[735]: Audio connection got disconnected Any hints how to get HSP/HFP working here?

    Read the article

  • How Do I make an Acer T230H Touchcreen work on Ubuntu 9.10?

    - by N Rahl
    I've done this so far: sudo nano /etc/udev/rules.d/99-touchscreen.rules And added: SUBSYSTEM=="usb", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="usb/quanta_touch" SUBSYSTEM=="input", KERNEL=="event*", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="input/quanta_touch" sudo service udev restart then the instructions here: http://ubuntuforums.org/showpost.php?p=8932808&postcount=36 And then added to my xorg conf: Section "InputDevice" Identifier "Acer T230H" Driver "hidtouch" Option "SendCoreEvents" "true" Option "ReportingMode" "Raw" Option "Device" "/dev/usb/quanta_touch" Option "PacketCount" "13" Option "OpcodePressure" "852034" Option "OpcodeX" "65584" Option "OpcodeY" "65585" Option "CalibrationModel" "1" Option "CornerTopLeftX" "0" Option "CornerTopLeftY" "0" Option "CornerTopRightX" "1920" # 1920 for 23" Option "CornerTopRightY" "0" Option "CornerBottomLeftX" "0" Option "CornerBottomLeftY" "1080" # 1080 for 23" Option "CornerBottomRightX" "1920" # 1920 for 23" Option "CornerBottomRightY" "1080" # 1080 for 23" Option "CornerScreenWidth" "1920" # 1920 for 23" Option "CornerScreenHeight" "1080" # 1080 for 23" EndSection Section "ServerLayout" Identifier "Touchscreen" InputDevice "Acer T230H" "SendCoreEvents" EndSection And restarted. And the touchscreen does nothing. Any ideas?

    Read the article

  • How to replace emacs keybindings with vim keybindings in OS X GUI-level text fields

    - by post meridiem
    I'm fairly fluent with VIM, but find myself having to use GUI programs (in OS X) and their awkward editing modes more and more frequently for my work. I know that OS X lets you use basic emacs keybindings in most textfields (browser window/bar, etc.). I'm wondering if it's possible to switch the emacs keybindings to vim keybindings for those GUI-level input areas. I understand that it might be possible to do that key-by-key in the keyboard layout preference pane. But that approach seems limited, cumbersome, and not very elegant. I'm thinking--and I may well be wrong here--that since OS X already ships with VIM installed, there should be a way to change a preference file deep in the system that maps VIM instead of emacs keybindings to the GUI text/input areas. Does anyone know if this is a) theoretically possible, or if there's something about how OS X maps emacs keybindings to its GUI interface that would make this impossible; and b) how/where that could be done?

    Read the article

  • PowerShell filter vs. function

    - by Marcel Janus
    I'm reading currently the Windows PowerShell 3.0 Step by Step book to get some more insights to PowerShell. On page 201 the author demonstrates that a filter is faster than the function with the same functionally. This script takes 2.6 seconds on his computer: MeasureaddOneFilter.ps1 Filter AddOne { "add one filter" $_ + 1 } and this one 4.6 seconds MeasureaddOneFunction.ps1 Function AddOne { "Add One Function" While ($input.moveNext()) { $input.current + 1 } } If I run this code is get the exact opposite of his result: .\MeasureAddOneFilter.ps1 Days : 0 Hours : 0 Minutes : 0 Seconds : 0 Milliseconds : 226 Ticks : 2266171 TotalDays : 2,62288310185185E-06 TotalHours : 6,29491944444444E-05 TotalMinutes : 0,00377695166666667 TotalSeconds : 0,2266171 TotalMilliseconds : 226,6171 .\MeasureAddOneFunction.ps1 Days : 0 Hours : 0 Minutes : 0 Seconds : 0 Milliseconds : 93 Ticks : 933649 TotalDays : 1,08061226851852E-06 TotalHours : 2,59346944444444E-05 TotalMinutes : 0,00155608166666667 TotalSeconds : 0,0933649 TotalMilliseconds : 93,3649 Can someone explain this to me?

    Read the article

  • To display the field values submitted with AJAX [closed]

    - by work
    Here is the code:I want to post the field values entered in this code to the page ajaxpost.php using Ajax and then do some operations there. What would be code required to be written in ajaxpost.php <html> <head> <script type="text/javascript"> function loadXMLDoc() { var xmlhttp; if (window.XMLHttpRequest) {// code for IE7+, Firefox, Chrome, Opera, Safari xmlhttp=new XMLHttpRequest(); } else {// code for IE6, IE5 xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); } xmlhttp.onreadystatechange=function() { if (xmlhttp.readyState==4 && xmlhttp.status==200) { document.getElementById("myDiv").innerHTML=xmlhttp.responseText; } } var zz=document.f1.dd.value; //alert(zz); var qq= document.f1.cc.value; xmlhttp.open("POST","ajaxpost.php",true); xmlhttp.setRequestHeader("Content-type","application/x-www-form-urlencoded"); xmlhttp.send("dd=zz&cc=qq"); } </script> </head> <body> <h2>AJAX</h2> <form name="f1"> <input type="text" name="dd"> <input type="text" name="cc"> <button type="button" onclick="loadXMLDoc()">Request data</button> <div id="myDiv"></div> </form> </body> </html>

    Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >