Search Results

Search found 47090 results on 1884 pages for 'linux ubuntu customize'.

Page 244/1884 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• No sound Ubuntu 10.10 (have SB Live! card)

  - by Chris Frazier

  I am new to Linux/Ubuntu and I just installed 10.10 on my Dell Desktop PC that was running Windows XP. The PC is about 5-6 years old and the sound card it has is a SoundBlaster Live! card. The Sound Preferences recognizes the card as [SB Live! Value] EMU10k1X. It is currently set to Analog Stereo Duplex. I tried multiple other sound configurations and nothing works. No sound but some clicks come out of the speakers. I ran the system test and during the audio tests the same thing happened, just clicks and pops. I tried to play some music with Rhythmbox and when it tries to play a track it tries for several seconds and then just closes itself, or sometimes just doesn't play. I ran a check for drivers, but the only driver it found to install was for my nVidia video card. It did not show any drivers for the sound card. Does anyone have any idea what I need to do to get the sound to work?

  Read the article

• Determine target architecture of binary file in Linux (library or executable)

  - by Fernando Miguélez

  We have an issue related to a Java application running under a (rather old) FC3 on a Advantech POS board with a Via C3 processor. The java application has several compiled shared libs that are accessed via JNI. Via C3 processor is suppossed to be i686 compatible. Some time ago after installing Ubuntu 6.10 on a MiniItx board with the same processor I found out that the previous statement is not 100% true. The Ubuntu kernel hanged on startup due to the lack of some specific and optional instructions of the i686 set in the C3 processor. These instructions missing in C3 implementation of i686 set are used by default by GCC compiler when using i686 optimizations. The solution in this case was to go with a i386 compiled version of Ubuntu distribution. The base problem with the Java application is that the FC3 distribution was installed on the HD by cloning from an image of the HD of another PC, this time an Intel P4. Afterwards the distribution needed some hacking to have it running such as replacing some packages (such as the kernel one) with the i383 compiled version. The problem is that after working for a while the system completely hangs without a trace. I am afraid that some i686 code is left somewhere in the system and could be executed randomly at any time (for example after recovering from suspend mode or something like that). My question is: Is there any tool or way to find out at what specific architecture is an binary file (executable or library) aimed provided that "file" does not give so much information?

  Read the article

• Ubuntu 12.04 partioning an external drive without lossing data

  - by Menelaos Perdikeas

  I have an Ubuntu 12.04 with an external 1.5T disk (just for data). It is /dev/sdc1 seen below: $ df -T Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda1 ext4 1451144932 27722584 1350794536 3% / udev devtmpfs 6199460 4 6199456 1% /dev tmpfs tmpfs 2482692 988 2481704 1% /run none tmpfs 5120 0 5120 0% /run/lock none tmpfs 6206724 284 6206440 1% /run/shm /dev/sdc1 fuseblk 1465135100 172507664 1292627436 12% /media/Elements The thing is I would like to implement this rsync-based backup strategy and I want to use my /dev/sdc1 external drive for that. Since the guide mentioned above recommends placing the backup directory in a separate partition I want to repartition the /dev/sdc1 external hard disk but retain existing data in a separate partition. E.g. split /dev/sdc1 into two partitions: (i) one to be used exclusively for the rsync-based backup and (ii) the other for the existing miscellaneous data. How should I go about partitioning with minimal risk to my existing data and what kind of filesystem do you recommend? I would prefer a console-based guide but unfortunately all the material I found on the web is oriented towards partitioning the main (bootable) disk and not an external fuseblk filesystem used only for passive data.

  Read the article

• How to locate phpmyadmin on ubuntu

  - by Chris

  Okay, I'm usually a windows user and I write quite happily there, unfortunately (or fortunately) I have installed linux on a dual boot and having installed some software I have a question... Where is it? I installed Apache, PHP, MySQL and separately phpmyadmin, Apache is up and running, I've seen my phpinfo page and MySQL is there. MySQL is telling me that there's a database for phpmyadmin, but...erm.. I can't seem to locate it. On a windows machine the directory would be in the www directory and I'd just navigate there... localhost/phpmyadmin/ but on Ubuntu I can't find it in the equivalent. I've been to /var/www/ and there's my index.html (from apache) and my phptest.php file but no phpmyadmin. There is a phpmyadmin in /lib but that only has 2 files in it. So having rambled lots, my question is, what do I have to do to be able to navigate to the phpmyadmin index page? I realise this could fall under the description of a server related question and should be posted elsewhere but as it's software on a home system some help would be appreciated. Do I need to move some files from somewhere? Help! I really don't want to have to go back to developing on Windows as I'll be deploying to a lamp system, my learning curve will be steep.

  Read the article

• Adding file to /etc/cron.d doesn't make it run (ubuntu 10.04)

  - by tom

  If I scp a cron file into /etc/cron.d it doesn't run unless I edit the file and change the command. Then crond seems to pick up the cron file. How can I make cron reload its cron files in ubuntu 10.04? 'touch'ing the file doesn't work nor does 'restart cron' or 'reload cron'. My cron file is set to run every minute and logs to a file. Nothing ends up in the log file until I edit the command, and there's no entry for it in /var/log/syslog I'm stumped. Here's my cron file saved to /etc/cron.d/runscript # Runs the script every minute. This is safe because it will exit with success if it's already running * * * * * www-data if [ -f /usr/local/bin/thing ]; then exec /usr/bin/php /usr/local/bin/thing mode:prod -a 14 -d >> /var/log/thing/mything.log 2>&1; else echo `date +'[%D %T]'` "Thing not deployed. Command not run\n" >> /var/log/thing/mything.log; fi &

  Read the article

• Windows XP cannot read DVD burned on Ubuntu

  - by webcrawl

  The story : I have burned a DVD disc on Ubuntu using Brasero. When file burning was complete, I canceled the burning of checksum to DVD. Then I put that DVD on Windows XP (SP3) and copied all the files from DVD to the hard drive (no errors when copying). When that was done I discovered that all copied files are not readable. What is more, all the files on that DVD also shown to be not readable, even though all file names, directories were in their place. What I found out? Windows detect that the disc is in CDFS (CD-ROM File System). Disc is clean as new, have no scratches. All files while opened in Notepad++ look like "NULNULNULNULNUL" in one line. The size of files is normal. Other discs that are recognized as CDFS can be read with no problems. What I tried? Starting CDFS service in Windows registry. Result - a new device in Windows Device Manager (JUBS JGH2ZCT SCSI CdRom Device). Removing my CD/DVD device from Device Manager. Result - Windows restarted the system and reinstalled the driver. So... how to read the DVD, when I have no access to any other PC, any other OS?

  Read the article

• Can't install mplayer or vlc on ubuntu

  - by mirko4

  I am trying to install Mplayer or VLC player on ubuntu feisty but i can't do it. I try with apt-get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies: mplayer: Depends: libasound2 (> 1.0.16) but 1.0.13-1ubuntu5 is to be installed Depends: libavcodec51 (>= 0.svn20080206-8) but it is not going to be installed or libavcodec-unstripped-51 (>= 0.svn20080206-8) but it is not installable Depends: libavformat52 (>= 0.svn20080206-8) but it is not going to be installed or libavformat-unstripped-52 (>= 0.svn20080206-8) but it is not installable Depends: libavutil49 (>= 0.svn20080206-8) but it is not going to be installed or libavutil-unstripped-49 (>= 0.svn20080206-8) but it is not installable Depends: libcaca0 (>= 0.99.beta14-1) but 0.99.beta11.debian-2build1 is to be installed Depends: libcdparanoia0 (>= 3.10.2+debian) but 3.10+debian~pre0-4build1 is to be installed Depends: libcucul0 (>= 0.99.beta14-1) but 0.99.beta11.debian-2build1 is to be installed Depends: libfaad0 (>= 2.6.1) but it is not going to be installed Depends: libfribidi0 (>= 0.10.9) but 0.10.7-4build1 is to be installed Depends: libgif4 (>= 4.1.6) but it is not going to be installed Depends: libjack0 (>= 0.109.2) but it is not going to be installed Depends: liblzo2-2 but it is not going to be installed Depends: libopenal1 but it is not going to be installed Depends: libpostproc51 (>= 0.svn20080206-8) but it is not going to be installed or libpostproc-unstripped-51 (>= 0.svn20080206-8) but it is not installable Depends: libspeex1 (>= 1.2~beta3-1) but 1.1.12-3 is to be installed Depends: libsvga1 Depends: libswscale0 (>= 0.svn20080206-8) but it is not going to be installed or libswscale-unstripped-0 (>= 0.svn20080206-8) but it is not installable Depends: mplayer-skin python-apt: Depends: libapt-inst-libc6.7-6-1.1 Depends: libapt-pkg-libc6.7-6-4.6 scim-gtk2-immodule: Depends: libscim8c2a (>= 1.4.6) but 1.4.4-7ubuntu1 is to be installed scim-modules-socket: Depends: libscim8c2a (>= 1.4.6) but 1.4.4-7ubuntu1 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). I try apt-get -f install but it doesn't work neither. What to do please help me ?!

  Read the article

• Ubuntu IP Configuration - multiple subnets & interfaces

  - by HaydnWVN

  Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

  Read the article

• Apache2 403 permission denied on Ubuntu 12.04

  - by skeniver

  I have a sub-directory in my /var/www folder called prod, which is password protected. It was all working fine until I asked my server admin to help me set up allow all access to one particular file. Now the entire folder is just giving me a 403 error. This is the sites-enabled file: <VirtualHost *:80> ServerAdmin [email protected] # Server name ServerName prod.xxx.co.uk DocumentRoot /var/www/prod <Directory /var/www/prod> Options Indexes FollowSymLinks MultiViews +ExecCGI Includes AllowOverride None Order allow,deny AuthType Basic AuthName "Please log in" AuthUserFile /home/ubuntu/.htpasswd Require valid-user </Directory> <Directory /var/www/prod/xxx/cgi-bin/api.pl> Allow from All Satisfy Any </Directory> ScriptAlias /xxx/cgi-bin/ /var/www/prod/xxx/cgi-bin/ ErrorLog ${APACHE_LOG_DIR}/prod.xxx.error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/prod.xxx.access.log combined </VirtualHost> Now he's unsure why this is blocking me out completely. No permissions have been changed, but this is the /var/www/ folder: 4 drwxr-xr-x 2 root root 4096 Jan 3 21:10 images 4 drwxr-sr-x 4 root www-data 4096 Mar 31 14:47 jslib 4 drwxr-xr-x 7 root root 4096 Jun 2 13:00 prod When I try to visit http://prod.xxx.co.uk, I don't get asked for the password; I just get 403'd I hope I've given enough information... Anyone able to spot something he can't?

  Read the article

• Ubuntu - wireless connection works great but wired is totally dead

  - by Dan

  I am running Ubuntu 10.04 on my Acer Aspire One netbook. The wireless connection works great, but the wired is totally dead. When I plug the Ethernet wire, the little led next to the port doesn't blink. If I do ifconfig, this is the output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1659 errors:0 dropped:0 overruns:0 frame:0 TX packets:1659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:132304 (132.3 KB) TX bytes:132304 (132.3 KB) wlan0 Link encap:Ethernet HWaddr 18:f4:6a:65:48:1f inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::1af4:6aff:fe65:481f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:94823 errors:0 dropped:0 overruns:0 frame:0 TX packets:81390 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:93028474 (93.0 MB) TX bytes:18002558 (18.0 MB) There is no eth0. Is that normal? In the "Network Connections" GUI there is an entry "Wired connection 1", its "MAC address" field is blank. How can I make the wired connection work?

  Read the article

• How do I enable Ubuntu Gnome system tools

  - by RussellW

  I am running Ubuntu 10 with Gnome 2.30.2. This is a VMWare workstation image provided by another company that I do not have support in this regard. I am trying to access the graphical tools for configuring the network, users, and services but the System-Administration menu does not have these options listed. The main issue I am trying to solve is to correct the problems with the gnome menu options and network settings I have the gnome-system-tools package installed, and I am unable to run command-line versions of the tools, such as nm-applet (I get no GUI if I run that command, the process is running in the background). I realize that I can perform many tasks command-line, but I would like to use the GUI for administrative functions as I am not overly proficient for all command for restarting services and setting a static IP with a specific gateway. Further, I can run gnome-nettool, but I cannot change the IP, I can only see my network card. nm-connection-editor does not show any network cards that I can configure to change the IP. Currently, I am getting a DHCP through my NAT in VMWare, I want to set it to a specific IP address though. Preferences Menu (note some missing options) ![Preferences Menu][1] Admin Menu (note some missing options) ![Admin Menu][2] Network Tools (I can view but not change IP address) ![Network Tools][3] Network Settings (Unable to change IP address) ![Network Settings][4] Network Connections (no connections listed, not even my existing ethernet NAT connection through VMWare) ![Network Connections][5] See images here that I have referenced: 1- http://i.imgur.com/kl8pP.png 2- http://i.imgur.com/K3Cjz.png 3- Iq7Xb.png 4- 7wheV.png 5- J2ad8.png

  Read the article

• CSS cross browser compatibility on Ubuntu

  - by bhefny

  Hello, I'm currently working in web development and my default desktop is Ubuntu and I'm kind of happy with the setup and applications I got going. But I need to test web pages for cross browser compatibility while still being on Ubuntu. I have gone through hell trying to get IE7 or IE8 (with wine) to run on ubuntu and when they finally worked they were very buggy and the graphics/scrolling was insanely slow. Of course there is the option of virtual box but again, too much GBytes just to run a small application! So to all the CSS gurus out there, how can I continue with my beloved Ubuntu and still deliver a good quality (tested) page. Thank you.

  Read the article

• Java development in Ubuntu

  - by Veera

  I'm a newbie to Linux systems and recently I started using Ubuntu 10.04. When I do java development in Windows, I usually keep my project files under some drive (D: for example) and under my development folder, such as D:\projects\myproj. But I'm bit confused with Ubuntu's folder structure. So, I just want to know how do you organize your projects in Ubuntu? Under which folder do we keep our projects file?

  Read the article

• Wireless driver activation issue in Compaq c700 in Ubuntu 9.04

  - by Fazil

  I am using Ubuntu 9.04, I cant access my wireless driver, I activate the madwifi in administrationhardware drivers, but I could'nt activated the wireless too. when I type lspci I get the following message, ################################################## # 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04) 01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) ################################################## but when I tried in Windows I found that the driver for my laptop is ################################################ atheros AR5007 802.11b/g WiFi Adapter ################################################ so what can I do for solving this problem.

  Read the article

• Ubuntu Launcher Items Don't Have Correct Environment Vars under NX

  - by ivarley

  I've got an environment variable issue I'm having trouble resolving. I'm running Ubuntu (Karmic, 9.10) and coming in via NX (NoMachine) on a Mac. I've added several environment variables in my .bashrc file, e.g.: export JAVA_HOME=$HOME/dev/tools/Linux/jdk/jdk1.6.0_16/ Sitting at the machine, this environment variable is available on the command line, as well as for apps I launch from the Main Menu. Coming in over NX, however, the environment variable shows up correctly on the command line, but NOT when I launch things via the launcher. As an example, I created a simple shell script called testpath in my home folder: #!/bin/sh echo $PATH && sleep 5 quit I gave it execute privileges: chmod +x testpath And then I created a launcher item in my Main Menu that simply runs: ./testpath When I'm sitting at the computer, this launcher runs and shows all the stuff I put into the $PATH variable in my .bashrc file (e.g. $JAVA_HOME, etc). But when I come in over NX, it shows a totally different value for the $PATH variable, despite the fact that if I launch a terminal window (still in NX), and type export $PATH, it shows up correctly. I assume this has to do with which files are getting loaded by the windowing system over NX, and that it's some other file. But I have no idea how to fix it. For the record, I also have a .profile file with the following in it: # if running bash if [ -n "$BASH_VERSION" ]; then # include .bashrc if it exists if [ -f "$HOME/.bashrc" ]; then . "$HOME/.bashrc" fi fi

  Read the article

• ubuntu suspend works, but then immediately starts

  - by Yoav Aner

  Having a strange problem after upgrading from Ubuntu 11.04 to 12.04. Previously I could suspend just fine, the computer will switch itself off. Pressing the ON button will switch it on and it will resume. After upgrading to 12.04 however, when I suspend it does (almost) the same, turns itself off, but about 2 seconds later, the computer turns itself on again, and it goes back to life from suspend. I haven't changed any of the hardware or BIOS and it was working before just fine. Also tried every possible switch of pm-suspend ; setting acpi_sleep=nonvs in /etc/default/grub and also this suggestion but nothing seems to make a difference... UPDATE: just tested suspend using the 12.04 liveCD and it was working perfectly fine... but when I boot normally it doesn't. ANOTHER UPDATE: After re-installing I noticed that I can suspend. However, after restoring my home folder - the strange suspend problem happens again. I then created a new user account. When I login to the other account I can suspend without a problem... So This seems specific to my account only. How/What can cause this in my own user settings?

  Read the article

• Strange results while measuring delta time on Linux

  - by pachanga

  Folks, could you please explain why I'm getting very strange results from time to time using the the following code: #include <unistd.h> #include <sys/time.h> #include <time.h> #include <stdio.h> int main() { struct timeval start, end; long mtime, seconds, useconds; while(1) { gettimeofday(&start, NULL); usleep(2000); gettimeofday(&end, NULL); seconds = end.tv_sec - start.tv_sec; useconds = end.tv_usec - start.tv_usec; mtime = ((seconds) * 1000 + useconds/1000.0) + 0.5; if(mtime > 10) printf("WTF: %ld\n", mtime); } return 0; } (You can compile and run it with: gcc test.c -o out -lrt && ./out) What I'm experiencing is sporadic big values of mtime variable almost every second or even more often, e.g: $ gcc test.c -o out -lrt && ./out WTF: 14 WTF: 11 WTF: 11 WTF: 11 WTF: 14 WTF: 13 WTF: 13 WTF: 11 WTF: 16 How can this be possible? Is it OS to blame? Does it do too much context switching? But my box is idle( load average: 0.02, 0.02, 0.3). Here is my Linux kernel version: $ uname -a Linux kurluka 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux

  Read the article

• Problem when compressing SWF in Linux with java.util.zip

  - by CaioToOn

  Hi! I've created a servlet that changes the binaries of a SWF file and output it to the user. The SWF is compressed by ZLIB by default. Then I inflate, change the binaries, deflate and output the result. Everything was running right on a Windows Server 2008 (also in 2003). Currently, we need change the server to Linux, and then, this servlet is somehow outputing a corrupted SWF File... what could be the problem? What intrigues me more is that there is no difference between the Windows and Linux servlet versions. Is there any undocumented linux specific behaviour for the java.util.zip package? My Windows Server is (where the servlet is working): Windows Server 2008 (6.0 - x86) Apache 2.2.11 Tomcat 6.0.16.0 Java JDK 1.6.0_12-b04 My CentOS Server is (where te servlet doesn't work) CentOS 5.4 (2.6.18-164.15.1.el5 - i386) Apache 2.2.3 Tomcat 6.0.16.0 Java JDK 1.6.0_12-b04 Any lead would be appreciated! Cheers, CaioToOn!

  Read the article

• Can not connect remotely to MySQL Server on Ubuntu 10.10

  - by BobFranz

  Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

  Read the article

• Where are Wireless Profiles stored in Ubuntu [closed]

  - by LonnieBest

  Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

  Read the article

• Ubuntu 12.04 VirtualBox on powerful W7 quite slow

  - by wnstnsmth

  I own a Thinkpad T420s with 8GB RAM, 160 GB SSD and a quite fast i7 processor. Summa summarum a very fast computer that works perfectly. Now, I am not very impressed by the performance of my Ubuntu 12.04 virtual machine running on VirtualBox 4.1.18. I assume that Virtual Machines are always a bit slower than the guest system, still I think it should be more performant given the hardware settings I give it: 4096 MB RAM 1 CPU without CPU limitation (I would like to give it more but then it does not seem to work - I am not experienced in this maybe somebody could give me advice on this too) Activated PAE/NX, VT-x/AMD-V and Nested Paging 96 MB Graphics Memory (no 2D or 3D acceleration) ~ 14 GB disk space, currently about 7 GB are used Maybe I misconfigured something, could you give me a hint please? Thanks! Edit: What I mean by slow is that for example switching tabs in the browser (whether FF or Chrome) only goes with a 0.5s delay or something, as well as switching application windows and/or double-clicking applications in the dock to get all open windows.. opening Aptana takes about a minute whereas opening something like Photoshop on the guest system takes 5 seconds

  Read the article

• Partitioning of Ubuntu server which will use OpenVZ and encrypted partitions (unlocked through SSH l

  - by DeletedAccount

  Hi, I'm about to install a server. Some context: My HDD is 1 TB and I have 2 GB RAM Ubuntu Server Lucid Lynx AMD 64 I will use OpenVZ and have most functionality separated into containers. To support disk quotas I need to use ext3 (not ext4) for the container partition. Each time I reboot the server I want to be forced to login through SSH and mount the encrypted partitions by typing my password (if someone steals the server, no critical data should be available). I want to have as much as possible encrypted. Yet I want to be able to login through SSH as I don't have a monitor or keyboard at the server. I am not sure how big I need my partitions to be. Being able to resize them later would be nice. I guess it implies using LVM? But the manual partition mount using SSH is also very important (in fact it's more important, if I have to pick one). How do you recommend that I partition the HDD? If I have daemons which needs the encrypted partitions, will they fail and can I just restart them after mounting the needed partitions?

  Read the article

• How do you get linux to honor setuid directories?

  - by Takigama

  Some time ago while in a conversation in IRC, one user in a channel I was in suggested someone setuid a directory in order for it to inherit the userid on files to solve a problem someone else was having. At the time I spoke up and said "linux doesn't support setuid directories". After that, the person giving the advice showed me a pastebin (http://codepad.org/4In62f13) of his system honouring the setuid permission set on a directory. Just to explain, when i say "linux doesnt support setuid directories" what I mean is that you can go "chmod u+s directory" and it will set the bit on the directory. However, linux (as i understood it) ignores this bit (on directories). Try as I might, I just cant quite replicate that pastebin. Someone suggested to me once that it might be possible to emulate the behaviour with selinux - and playing around with rules, its possible to force a uid on a file, but not from a setuid directory permission (that I can see). Reading around on the internet has been fairly uninformative - most places claim "no, setuid on directories does not work with linux" with the occasional "it can be done under specific circumstances" (such as this: http://arstechnica.com/etc/linux/2003/linux.ars-12032003.html) I dont remember who the original person was, but the original system was a debian 6 system, and the filesystem it was running was xfs mounted with "default,acl". I've tried replicating that, but no luck so far (tried so far with various versions of debian, ubuntu, fedora and centos) Can anyone clue me in on what or how you get a system to honor setuid on a directory?

  Read the article

• System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

  - by Tor Thommesen

  I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

  Read the article

• How to customize preferences screen theme to look like that ?

  - by Alex

  Ok, I have a Preferences activity set with an XML layout. Here I have a couple of Preferences that open some dialogs. On these preferences I want to have an arrow on the right of them like in the screenshot. How I do this, is something related to the theme ? First screenshot is how I want to look, second is what I have now. http://img545.imageshack.us/i/screenshot1zlk.png/ http://img405.imageshack.us/i/tsc3.png/

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >