Search Results

Search found 52450 results on 2098 pages for 'disk operating system'.

Page 246/2098 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

  • Iomega Home Media Network Hard Drive: Filesystem on the disk?

    - by JJarava
    Hi all! I've got to deal with a malfunctioning "Iomega Home Media Network Hard Drive", and I was wondering if anybody knew what file system format does Iomega use on the disk? I've been trying to find the answer online, but i've got nowhere, and checking an obviously malfucntioning unit is not going to give me any assurance. Thanks a lot

    Read the article

  • Are there any windows applications that serve video from a local disk to h264 flash viewable through the browser on your local network?

    - by Matt
    Are there any windows applications that serve video from a server's local disk to h264 flash viewable through the browser on your local network? I'm thinking that on machine1, I'd have a folder with a ton of videos. This program would serve the videos on a website visible at http://machine1/myvids and that it would serve them in h264 and do the h264 conversion on the fly using the GPU. I know it's a lofty set of reqs but I'm wondering if anything like this is out there.

    Read the article

  • Is this a normal operating temperature range for a New Third-Generation MacBook Air (2.13 MHz, 120 G

    - by doug
    Even with just my text editor open (no web browser) and maybe the terminal, the baseline temperature is usually above 40 C. When i open 4-5 browser tabs in Safari (even if none of Sites have Flash) the temp can quickly go over 50 C. (In addition, i am observing these temps even though i have turned the fan up to 3000 rpms). (i have install smcFanControl on my MBA so i can see the temp in the menu bar.) So this means my MBA is running much warmer than my MBP; and in practice, it means that i have to be very careful how i use my MBA. Of course if i load a Site with Flash, it just freaks out, and often quickly goes above 65 C (I've installed a flash blocker to avoid this). Is anyone else observing this behavior? I have checked the Apple boards and sure enough, there are a lot of complaints, but nothing from Apple.

    Read the article

  • Windows and file system abstraction - how much does it matter where something comes from?

    - by deceze
    I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Bootcamp driver package includes file system drivers (right term?) that enable Windows to access the Mac OS HFS+ partition. AFAIK it's a read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

    Read the article

  • Anyone had any issues getting a disk to start on a Walrus storage sytem?

    - by Peter NUnn
    Hi folks, I'm trying to get a Eucalyptus system up and running and have managed to get the cloud controller and node controller running fine, with an instance running in the cloud system, but without any persistent storage. When I try and create a volume I get euca-create-volume -s 10 -z cluster1 VOLUME vol-5F5D0659 10 creating 2010-05-31T09:10:11.408Z but when I try and see the volume I get euca-describe-volumes VOLUME vol-5F5D0659 10 cluster1 failed 2010-05-31T09:10:11.408Z VOLUME vol-5FE9065E 10 cluster1 failed 2010-05-31T09:02:56.721Z I've dug all over the place, but can't seem to turn up a reason the creation would fail or where to start looking to see what the issue might be. Anyone have any ideas where to even start looking for the answer to this? Ta Peter.

    Read the article

  • Should I reformat XP with: Quick, regular, or "the current file-system"?

    - by Julie
    When reformatting, Windows XP ask me to choose from these formatting methods. (Implying that ALL of them are "formatting methods"... even #3) Reformat using NTFS (quick) Reformat using NTFS Leave the current file-system intact (no changes) What choice #3 really mean? Does it mean: A. Leave the current file-system (whatever file-system is already in use) and reformat to match that. (ie. If you current have NTFS, reformat to that again. If you currently have FAT32, reformat to that again. That is: Reformat without changing to a different file-system. Leave the current type.) or... B. Do absolutely nothing. Don't format. Don't delete any of my files. Abort the formatting process entirely.

    Read the article

  • How to use a custom Windows 7 system drive letter?

    - by Ivan
    The subject PC has many hard drive partitions dedicated for different purposes, C: being a Windows XP system drive and F: (which is actually the next primary partition placed right after C: physically) being intended to host a newly installed Windows 7 instance (meant for "dual boot" configuration). Needless to say the intention was all the partitions to have exactly the same letters under both OSes, needless to say Windows 7 has detected all of them in a completely different order which would not be a problem (as the non-system drives letters can be changed easily after installation) if it wouldn't have named it's system drive C: (meant to be F:), which I have no Idea how to change. Is there a way to set the letter you want? I don't mind reinstalling Windows 7 from scratch if it is to be set at installation time or even configured in some text files on the installation DVD. I have tried this way, but it renders the Windows 7 system desktop unbootable (gets stuck on "Preparing your desktop..." after "Welcome").

    Read the article

  • What software can copy the whole hard drive with Operating System to DVD-R, and be able to "refresh

    - by Jian Lin
    What software can take a snapshot of a Win XP or Win 7 machine -- burning all files into a DVD-R, and then be able to boot from that DVD-R can restore the whole machine back to that state stored inside the DVD-R? Maybe for Win XP, it is easier as the OS can be just 1 or 2GB on the hard drive, but for Win 7, a fresh installation is already 16GB on the hard drive, so it will need several DVD-R to take the snapshot? thanks. (any of these software are open source?)

    Read the article

  • Cannot install grub to RAID1 (md0)

    - by Andrew Answer
    I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

    Read the article

  • Any good method for mounting Hadoop HDFS from another system?

    - by Beel
    I want to mount the Cloudera Hadoop as a Linux file system over the LAN. As a setup, I already have the hadoop cluster running on a set of Ubuntu machines. But now I need to be able to use it as a normal file system from a Fedora system over the LAN. I tried FUSe but two things: 1. Cloudera says FUSE loses data (click here for that comment by a Cloudera employee on the official Cloudera support site) 2. I've had no success making it work the way we want As a point of clarification, I am using Hadoop ONLY for the file system, not for its other capabilities.

    Read the article

  • Impact of the L3 cache on performance - worth a dual-processor system?

    - by Dan Nissenbaum
    I will be purchasing a new high-end system, and I would like to have a better sense of whether a dual-processor Xeon system (I am looking at the new, high-end Xeon E5-2687W) might, realistically, provide a noticeable performance improvement due to the doubling of the L3 cache (20 MB per CPU). (This is in addition to the occasional added advantage due to the doubling of cores and RAM.) My usage scenario is, roughly, that I have many background applications running at any time - 3 or 4 data compression/backup applications, a low-impact web server, one or two virtual machines at any given time (usually fairly idle), and perhaps 20 utility programs that utilize a noticeable (but small) portion of the CPU cores. In total, when I am not actively using the computer, about 25% of the total CPU power is utilized in my current i7-970 6-core (12 thread) system. When I am doing routine work, the CPU utilization often exceeds 50%, and occasionally hits 75%-80%. The Xeon E5-2687W is not only a second-generation i7 (so should improve performance for that reason), but also has 8 cores (16 threads), rather than 6 cores. For this reason, I expect to run into the 75% CPU range even less frequently. Nonetheless, the ability to double the cores and the RAM is a consideration. However, in the end, I believe this decision comes down to whether the doubling of the L3 cache will provide a noticeable improvement. There are many benchmarks, and a lot of discussion, regarding CPU power. However, I find very little discussion of L3 cache utilization, and how increases in the L3 cache (such as doubling it with dual processors) affect performance. For example: If there are only two processes running, but each benefits from a large L3 cache (such as might be the case for background processes that frequently scan the file system), perhaps the overall system performance might noticeably improve with dual CPU's - even if only a single core is active on each CPU - due to each process having double the effective L3 cache. I am hoping that someone has a sense of the benefits of increasing (or doubling) the L3 cache size. Note: the CPU I am considering (the Xeon E5-2687W) has 20 MB L3 cache, so a system with dual CPU's would have 40 MB L3 cache.

    Read the article

  • How can I set the BIOS/EFI security password on IBM System x servers by script/ASU?

    - by christian123
    I want to deploy IBM System x servers (like IBM System x 3550 M2) automatically and need to set a security password in the bios (actually it's uefi). I found this nice tool named ASU: http://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-55021 Unfortunately I cannot see an option to set the password. Forum searches only show me people who want to reset the password using this tool. Does anybody know how to automatically deploy system passwords on IBM Intel-based servers?

    Read the article

  • How to add a mirror-disk to my OpenSolaris?

    - by Sanoj
    I have a machine with two harddrives. I have installed OpenSolaris on one of them and now I want to add the other one as a mirror-drive in my zpool rpool. I guess I have to format the second disk first and then add it to the pool. How can I do this?

    Read the article

  • Dedicated hard disk for Informix SE dbname.dbs files & dedicated ramdisk for /tmp files.

    - by Frank Computer
    INFORMIX-SE 7.2: I would like to dedicate a hard disk, exclusively for my dbname.dbs directory which holds all the .dat and .idx files, and create a ramdisk for my /tmp temporary files in order to improve performance. I would also like to strip down the OS from any unecessary files and processes to minimize overhead for my dedicated application. Is this a good idea and are there any roadmaps for accomplishing this?

    Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >