Search Results

Search found 21719 results on 869 pages for 'password security'.

Page 247/869 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • Adding local users / passwords on Kerberized Linux box

    - by Brian
    Right now if I try to add a non-system user not in the university's Kerberos realm I am prompted for a Kerberos password anyway. Obviously there is no password to be entered, so I just press enter and see: passwd: Authentication token manipulation error passwd: password unchanged Typing passwd newuser has the same issue with the same message. I tried using pwconv in the hopes that only a shadow entry was needed, but it changed nothing. I want to be able to add a local user not in the realm and give them a local password without being bothered about Kerberos. I am on Ubuntu 10.04. Here are my /etc/pam.d/common-* files (the defaults that Ubuntu's pam-auth-update package generates): account # here are the per-package modules (the "Primary" block) account [success=1 new_authtok_reqd=done default=ignore] pam_unix.so # here's the fallback if no module succeeds account requisite pam_deny.so # prime the stack with a positive return value if there isn't one already; # this avoids us returning an error just because nothing sets a success code # since the modules above will each just jump around account required pam_permit.so # and here are more per-package modules (the "Additional" block) account required pam_krb5.so minimum_uid=1000 # end of pam-auth-update config auth # here are the per-package modules (the "Primary" block) auth [success=2 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=1 default=ignore] pam_unix.so nullok_secure try_first_pass # here's the fallback if no module succeeds auth requisite pam_deny.so # prime the stack with a positive return value if there isn't one already; # this avoids us returning an error just because nothing sets a success code # since the modules above will each just jump around auth required pam_permit.so # and here are more per-package modules (the "Additional" block) # end of pam-auth-update config password # here are the per-package modules (the "Primary" block) password requisite pam_krb5.so minimum_uid=1000 password [success=1 default=ignore] pam_unix.so obscure use_authtok try_first_pass sha512 # here's the fallback if no module succeeds password requisite pam_deny.so # prime the stack with a positive return value if there isn't one already; # this avoids us returning an error just because nothing sets a success code # since the modules above will each just jump around password required pam_permit.so # and here are more per-package modules (the "Additional" block) # end of pam-auth-update config session # here are the per-package modules (the "Primary" block) session [default=1] pam_permit.so # here's the fallback if no module succeeds session requisite pam_deny.so # prime the stack with a positive return value if there isn't one already; # this avoids us returning an error just because nothing sets a success code # since the modules above will each just jump around session required pam_permit.so # and here are more per-package modules (the "Additional" block) session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so # end of pam-auth-update config

    Read the article

  • Getting a Non-Genuine windows message on a Genuin Windows 7

    - by user36257
    I have a Genuin Win7 enterprise on my Laptop. A few hours ago when I wanted to log into windows it did not accept my Password. I used the safe mode and it accepted the password I was using before this new password. It is the laptop for work and we have a changing password policy for every three months, so the pasword that I could use in SAFE MODE was the password I had for the last previous threee months. ... after that I used SYSTEM RESTORE and it reveretd it back to Yesterday ... so this time I could loging successfully with my current password. BUT It shows me a message that I am a victim of software counterfeiting and when I restarted the windows again and logged into windows, this time it is just a black desktop. weird...any ideas?

    Read the article

  • Windows 7 -Can't get access to shared folder from one computer to another.

    - by Carbonara
    I have 2 windows 7 computers and i'm trying to share a folder (that I want password protection on) outside of the homegroup. Both computers are part of the same workgroup and I have the same user account/password combination on both computers plus I have password protected sharing turned on in the network and sharing centre along with file and printer sharing turned on. On computer 1 I have right clicked and selected that I want the folder shared. When I navigate via the network on computer 2 to computer 1 the shared folder shows up on computer 2 but double clicking on it to open it gives me an alert saying I don't have permission to access it, no option to type in the user name and password (according to the help files I shouldn't even need to type the password in if both computers have the same username/password anyway but would need it if I'm logged in as a different user). It's just a blanket denial of access.

    Read the article

  • How can I password protect & let cgi-bin to work?

    - by jaaaaaaax
    This is taken from sites-available directory. It's a virtual host setting for apache. Accessing myiphere/cgi-bin/ throws 403. The directory setting for /var/www2/ drwxrwxrwx 8 www-data www-data NameVirtualHost myiphere <VirtualHost myiphere> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory>

    Read the article

  • Not able to access the server after changing the password? [closed]

    - by cyrilsebastian
    While accessing the server, the error comes: Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again. I am logging in from Administrator in XP machine, able to access server from other machines. Is there any problem with administrator profile??

    Read the article

  • Great Blogs About Oracle Solaris 11

    - by Markus Weber
    Now that Oracle Solaris 11 has been released, why not blog about blogs. There is of course a tremendous amount of resource and information available, but valuable insights directly from people actually building the product is priceless. Here's a list of such great blogs. NOTE: If you think we missed some good ones, please let us know in the comments section !  Topic Title Author Top 11 Things My 11 favourite Solaris 11 features Darren Moffat Top 11 Things These are 11 of my favorite things! Mike Gerdts Top 11 Things 11 reason to love Solaris 11     Jim Laurent SysAdmin Resources Solaris 11 Resources for System Administrators Rick Ramsey Overview Oracle Solaris 11: The First Cloud OS Larry Wake Overview What's a "Cloud Operating System"? Harry Foxwell Overview What's New in Oracle Solaris 11 Jeff Victor Try it ! Virtually the fastest way to try Solaris 11 (and Solaris 10 zones) Dave Miner Upgrade Upgrading Solaris 11 Express b151a with support to Solaris 11 Alan Hargreaves IPS The IPS System Repository Tim Foster IPS Building a Solaris 11 repository without network connection Jim Laurent IPS IPS Self-assembly – Part 1: overlays Tim Foster IPS Self assembly – Part 2: multiple packages delivering configuration Tim Foster Security Immutable Zones on Encrypted ZFS Darren Moffat Security User home directory encryption with ZFS Darren Moffat Security Password (PAM) caching for Solaris su - "a la sudo" Darren Moffat Security Completely disabling root logins on Solaris 11 Darren Moffat Security OpenSSL Version in Solaris Darren Moffat Security Exciting Crypto Advances with the T4 processor and Oracle Solaris 11 Valerie Fenwick Performance Critical Threads Optimization Rafael Vanoni Performance SPARC T4-2 Delivers World Record SPECjvm2008 Result with Oracle Solaris 11 BestPerf Blog Performance Recent Benchmarks Using Oracle Solaris 11 BestPerf Blog Predictive Self Healing Introducing SMF Layers Sean Wilcox Predictive Self Healing Oracle Solaris 11 - New Fault Management Features Gavin Maltby Desktop What's new on the Solaris 11 Desktop? Calum Benson Desktop S11 X11: ye olde window system in today's new operating system Alan Coopersmith Desktop Accessible Oracle Solaris 11 - released! Peter Korn

    Read the article

  • apt sources.list disabled on upgrade to 12.04

    - by user101089
    After a do-release-upgrade, I'm now running ubuntu 12.04 LTS, as indicated below > lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise However, I find that all the entries in my /etc/apt/sources.list were commented out except for one. QUESTION: Is it safe for me to edit these, replacing the old 'lucid' with 'precise' in what is shown below? ## unixteam source list # deb http://debian.yorku.ca/ubuntu/ precise main main/debian-installer restricted restricted/debian-installer # disabled on upgrade to precise # deb-src http://debian.yorku.ca/ubuntu/ precise main restricted # disabled on upgrade to precise # deb http://debian.yorku.ca/ubuntu/ lucid-updates main restricted # disabled on upgrade to precise # deb-src http://debian.yorku.ca/ubuntu/ lucid-updates main restricted # disabled on upgrade to precise # deb http://debian.yorku.ca/ubuntu/ precise universe # disabled on upgrade to precise # deb-src http://debian.yorku.ca/ubuntu/ precise universe # disabled on upgrade to precise # deb http://debian.yorku.ca/ubuntu/ precise multiverse # disabled on upgrade to precise # deb-src http://debian.yorku.ca/ubuntu/ precise multiverse # disabled on upgrade to precise # deb http://debian.yorku.ca/ubuntu lucid-security main restricted # disabled on upgrade to precise # deb-src http://debian.yorku.ca/ubuntu lucid-security main restricted # disabled on upgrade to precise # deb http://debian.yorku.ca/ubuntu lucid-security universe # disabled on upgrade to precise # deb-src http://debian.yorku.ca/ubuntu lucid-security universe # disabled on upgrade to precise # deb http://debian.yorku.ca/ubuntu lucid-security multiverse # disabled on upgrade to precise # deb-src http://debian.yorku.ca/ubuntu lucid-security multiverse # disabled on upgrade to precise # R sources # see http://cran.us.r-project.org/bin/linux/ubuntu/ for details # deb http://probability.ca/cran/bin/linux/ubuntu lucid/ # disabled on upgrade to precise deb http://archive.ubuntu.com/ubuntu precise main multiverse universe

    Read the article

  • links for 2011-01-03

    - by Bob Rhubart
    Using Solaris zfs + iscsi targets with Oracle VM (Wim Coekaerts Blog) "I was playing with my Oracle VM setup and needed some shared storage that was block based. I did not have a storage array available but I did have a Solaris box, that I use for Oracle VDI, available." - Wim Coekaerts (tags: oracle otn solaris oraclevm virtualization) DanT's GridBlog: Oracle Grid Engine: Changes for a Bright Future at Oracle "Today, we are entering a new chapter in Oracle Grid Engine’s life. Oracle has been working with key members of the open source community to pass on the torch for maintaining the open source code base to the Open Grid Scheduler project hosted on SourceForge." - Dan Templeton (tags: oracle gridengine) Oracle Fusion Middleware Security: How do I secure my services? "I've been up early for a couple of days talking to a customer about how they should secure their services,' says Chris Johnson. "I'm going to tell you what I told them." (tags: oracle fusionmiddleware security) OldSpice your Innovation - Dangers of Status Quo E2.0 | Enterprise 2.0 Blogs "If organizations only leverage E2.0 technologies in a 'me too' fashion, they are essentially using a bucket to bail water from a leaking ship." - John Brunswick (tags: oracle enteprise2.0) The Aquarium: GlassFish in 2011 - What to expect A look into the Glassfish crystal ball... (tags: oracle glassfish) Andrejus Baranovskis's Blog: Fusion Middleware 11g Security - Retrieve Security Groups from ADF 11g Oracle ACE Director Andrejus Baranovskis shows you what to do when you need to access security information directly from an ADF 11g application. (tags: oracle otn fusionmiddleware security adf) @eelzinga: Book review : Oracle SOA Suite 11g R1 Developer's Guide "What I really liked in this book...was the compare/description of the Oracle Service Bus. The authors did a great job on describing functionality of components existing in the SOA Suite and how to model them in your own process." - Oracle ACE Eric ElZinga (tags: oracle oracleace soa bookreview soasuite)

    Read the article

  • What .NET objects should I use to create a cookie based session in MVC?

    - by makerofthings7
    I'm writing a custom password reset application that uses a validation technique that doesn't fit cleanly with ASP.NET Membership Provider's challenge questions. Namely I need to invoke a workflow and collect information from the end user (backup phone number, email address) after the user logs in using a custom form. The only way I know to create a cookie-based session (without too much "innovation" on my part) is to use WIF. What other standard objects can I use with ASP.NET MVC to create an authenticated session that works with non-windows user stores? Ideally I can store "role" or claim information in the session object such as "admin", "departmentXadmin", "normalUser", or "restrictedUser" The workflow would look like this: User logs in with username and password If the username and pw are correct a (stateless) cookie based session is created The user gets redirected to a HTML form that allows them to enter their backup phone number (for SMS dual factor), or validate it if already set. The user can then change their password using the form provided The "forgot password" would look like this User requests OTP code to be sent to the phone User logs in using username and OTP If the OTP is valid and not expired then create a cookie based session and redirect to a form that allows password reset Show password reset form, and process results.

    Read the article

  • Ubuntu 13.04 client cannot connect to Raspbian samba share

    - by envoyweb
    I have a client Ubuntu 13.04 machine trying to connect to a server running Raspbian with samba and samba-common-bin installed on the server I can see my share and when I try to login I get this error: Unable to access location: Failed to write windows share Cannot allocate memory. I have installed ntfs-3g for the usb hard drive that already auto mounts on the server so I never had to create a directory or edit fstab. Testparm on the server states the following: [global] workgroup = ENVOYWEB server string = %h server map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [homes] comment = Home Directories valid users = %S create mask = 0700 directory mask = 0700 browseable = No [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [BigDude] comment = Sharing BigDude's Files path = /media/BigDude/ valid users = @users read only = No create mask = 0755 testparm on the client which is running ubuntu is as follows [global] workgroup = ENVOYWEB server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers

    Read the article

  • Nested entities in Google App Engine. Do I do it right?

    - by Aleksandr Makov
    Trying to make most of the GAE Datastore entities concept, but some doubts drill my head. Say I have the model: class User(ndb.Model): email = ndb.StringProperty(indexed=True) password = ndb.StringProperty(indexed=False) first_name = ndb.StringProperty(indexed=False) last_name = ndb.StringProperty(indexed=False) created_at = ndb.DateTimeProperty(auto_now_add=True) @classmethod def key(cls, email): return ndb.Key(User, email) @classmethod def Add(cls, email, password, first_name, last_name): user = User(parent=cls.key(email), email=email, password=password, first_name=first_name, last_name=last_name) user.put() UserLogin.Record(email) class UserLogin(ndb.Model): time = ndb.DateTimeProperty(auto_now_add=True) @classmethod def Record(cls, user_email): login = UserLogin(parent=User.key(user_email)) login.put() And I need to keep track of times of successful login operations. Each time user logs in, an UserLogin.Record() method will be executed. Now the question — do I make it right? Thanks. EDIT 2 Ok, used the typed arguments, but then it raised this: Expected Key instance, got User(key=Key('User', 5418393301680128), created_at=datetime.datetime(2013, 6, 27, 10, 12, 25, 479928), email=u'[email protected]', first_name=u'First', last_name=u'Last', password=u'password'). It's clear to understand, but I don't get why the docs are misleading? They implicitly propose to use: # Set Employee as Address entity's parent directly... address = Address(parent=employee) But Model expects key. And what's worse the parent=user.key() swears that key() isn't callable. And I found out the user.key works. EDIT 1 After reading the example form the docs and trying to replicate it — I got type error: TypeError('Model constructor takes no positional arguments.'). This is the exacto code used: user = User('[email protected]', 'password', 'First', 'Last') user.put() stamp = UserLogin(parent=user) stamp.put() I understand that Model was given the wrong argument, BUT why it's in the docs?

    Read the article

  • MVC Scaffold Template Not Generating?

    - by monkey9987
    Been working on an MVC project and my templates were not generating. I first created my Model inside my "Models" folder, then did a quick compile. Next I went to the Views folder to get it created, right click and say "Add View" then I clicked the checkbox to create an edit page. What happened was the template would never seem to pull in my Model, it would just have the default header items, but the entire model was missing.  My model was defined as follows: public class LogOnModel { [Required][Display(Name = "User name")]public string UserName;[Required][DataType(DataType.Password)][Display(Name = "Password")]public string Password;[Display(Name = "Remember me?")]public bool RememberMe; } See anything wrong with that? I couldn't figure out why each time I created my View and selected the option to create the "Edit" scaffold automatically, it would come up blank. Turns out I'm missing my get / set methods on the Model class items. Here's my code with the correct setup: public class LogOnModel { [Required][Display(Name = "User name")]public string UserName { get; set; } [Required][DataType(DataType.Password)][Display(Name = "Password")]public string Password { get; set; }[Display(Name = "Remember me?")]public bool RememberMe { get; set; } }  I hope that helps someone out, it's pretty simple when I look at it now, but that's always the case!  ~ Steve

    Read the article

  • How to do MVC the right way

    - by Ieyasu Sawada
    I've been doing MVC for a few months now using the CodeIgniter framework in PHP but I still don't know if I'm really doing things right. What I currently do is: Model - this is where I put database queries (select, insert, update, delete). Here's a sample from one of the models that I have: function register_user($user_login, $user_profile, $department, $role) { $department_id = $this->get_department_id($department); $role_id = $this->get_role_id($role); array_push($user_login, $department_id, $role_id); $this->db->query("INSERT INTO tbl_users SET username=?, hashed_password=?, salt=?, department_id=?, role_id=?", $user_login); $user_id = $this->db->insert_id(); array_push($user_profile, $user_id); $this->db->query(" INSERT INTO tbl_userprofile SET firstname=?, midname=?, lastname=?, user_id=? ", $user_profile); } Controller - talks to the model, calls up the methods in the model which queries the database, supplies the data which the views will display(success alerts, error alerts, data from database), inherits a parent controller which checks if user is logged in. Here's a sample: function create_user(){ $this->load->helper('encryption/Bcrypt'); $bcrypt = new Bcrypt(15); $user_data = array( 'username' => 'Username', 'firstname' => 'Firstname', 'middlename' => 'Middlename', 'lastname' => 'Lastname', 'password' => 'Password', 'department' => 'Department', 'role' => 'Role' ); foreach ($user_data as $key => $value) { $this->form_validation->set_rules($key, $value, 'required|trim'); } if ($this->form_validation->run() == FALSE) { $departments = $this->user_model->list_departments(); $it_roles = $this->user_model->list_roles(1); $tc_roles = $this->user_model->list_roles(2); $assessor_roles = $this->user_model->list_roles(3); $data['data'] = array('departments' => $departments, 'it_roles' => $it_roles, 'tc_roles' => $tc_roles, 'assessor_roles' => $assessor_roles); $data['content'] = 'admin/create_user'; parent::error_alert(); $this->load->view($this->_at, $data); } else { $username = $this->input->post('username'); $salt = $bcrypt->getSalt(); $hashed_password = $bcrypt->hash($this->input->post('password'), $salt); $fname = $this->input->post('firstname'); $mname = $this->input->post('middlename'); $lname = $this->input->post('lastname'); $department = $this->input->post('department'); $role = $this->input->post('role'); $user_login = array($username, $hashed_password, $salt); $user_profile = array($fname, $mname, $lname); $this->user_model->register_user($user_login, $user_profile, $department, $role); $data['content'] = 'admin/view_user'; parent::success_alert(4, 'User Sucessfully Registered!', 'You may now login using your account'); $data['data'] = array('username' => $username, 'fname' => $fname, 'mname' => $mname, 'lname' => $lname, 'department' => $department, 'role' => $role); $this->load->view($this->_at, $data); } } Views - this is where I put html, css, and JavaScript code (form validation code for the current form, looping through the data supplied by controller, a few if statements to hide and show things depending on the data supplied by the controller). <!--User registration form--> <form class="well min-form" method="post"> <div class="form-heading"> <h3>User Registration</h3> </div> <label for="username">Username</label> <input type="text" id="username" name="username" class="span3" autofocus> <label for="password">Password</label> <input type="password" id="password" name="password" class="span3"> <label for="firstname">First name</label> <input type="text" id="firstname" name="firstname" class="span3"> <label for="middlename">Middle name</label> <input type="text" id="middlename" name="middlename" class="span3"> <label for="lastname">Last name</label> <input type="text" id="lastname" name="lastname" class="span3"> <label for="department">Department</label> <input type="text" id="department" name="department" class="span3" list="list_departments"> <datalist id="list_departments"> <?php foreach ($data['departments'] as $row) { ?> <option data-id="<?php echo $row['department_id']; ?>" value="<?php echo $row['department']; ?>"><?php echo $row['department']; ?></option> <?php } ?> </datalist> <label for="role">Role</label> <input type="text" id="role" name="role" class="span3" list=""> <datalist id="list_it"> <?php foreach ($data['it_roles'] as $row) { ?> <option data-id="<?php echo $row['role_id']; ?>" value="<?php echo $row['role']; ?>"><?php echo $row['role']; ?></option> <?php } ?> </datalist> <datalist id="list_collection"> <?php foreach ($data['tc_roles'] as $row) { ?> <option data-id="<?php echo $row['role_id']; ?>" value="<?php echo $row['role']; ?>"><?php echo $row['role']; ?></option> <?php } ?> </datalist> <datalist id="list_assessor"> <?php foreach ($data['assessor_roles'] as $row) { ?> <option data-id="<?php echo $row['role_id']; ?>" value="<?php echo $row['role']; ?>"><?php echo $row['role']; ?></option> <?php } ?> </datalist> <p> <button type="submit" class="btn btn-success">Create User</button> </p> </form> <script> var departments = []; var roles = []; $('#list_departments option').each(function(i){ departments[i] = $(this).val(); }); $('#list_it option').each(function(i){ roles[roles.length + 1] = $(this).val(); }); $('#list_collection option').each(function(i){ roles[roles.length + 1] = $(this).val(); }); $('#list_assessor option').each(function(i){ roles[roles.length + 1] = $(this).val(); }); $('#department').blur(function(){ var department = $.trim($(this).val()); $('#role').attr('list', 'list_' + department); }); var password = new LiveValidation('password'); password.add(Validate.Presence); password.add(Validate.Length, {minimum: 10}); $('input[type=text]').each(function(i){ var field_id = $(this).attr('id'); var field = new LiveValidation(field_id); field.add(Validate.Presence); if(field_id == 'department'){ field.add(Validate.Inclusion, {within : departments}); } else if(field_id == 'role'){ field.add(Validate.Inclusion, {within : roles}) } }); </script> The codes above are actually code from the application that I'm currently working on. I'm working on it alone so I don't really have someone to review my code for me and point out the wrong things in it so I'm posting it here in hopes that someone could point out the wrong things that I've done in here. I'm also looking for some guidelines in writing MVC code like what are the things that should be and shouldn't be included in views, models and controllers. How else can I improve the current code that I have right now. I've written some really terrible code before(duplication of logic, etc.) that's why I want to improve my code so that I can easily maintain it in the future. Thanks!

    Read the article

  • Quick Fix for GlassFish/MySQL NoPasswordCredential Found

    - by MarkH
    Just the other day, I stood up a GlassFish 3.1.2 server in preparation for a new web app we've developed. Since we're using MySQL as the back-end database, I configured it for MySQL (driver) and created the requisite JDBC resource and supporting connection pool. Pinging the finished pool returned a success, and all was well. Until we fired up the app, that is -- in this case, after a weekend. Funny how things seem to break when you leave them alone for a couple of days. :-) Strangely, the error indicated "No PasswordCredential found". Time to re-check that pool. All the usual properties and values were there (URL, driverClass, serverName, databaseName, portNumber, user, password) and were populated correctly. Yes, the password field, too. And it had pinged successfully. So why the problem? A bit of searching online produced enough relevant material to offer promise. I didn't take notes as I was investigating the cause (note to self), but here were the general steps I took to resolve the issue: First, per some guidance I had found, I tried resetting the password value to nothing (using () for a value). Of course, this didn't fix anything; the database account requires a password. And when I tried to put the value back, GlassFish politely refused. Hmm. I'd seen that some folks created a new pool to replace the "broken" one, and while that did work for them, it seemed to simply side-step the issue. So I deleted the password property - which GlassFish allowed me to do - and restarted the domain. Once I was back in, I re-added the password property and its value, saved it, and pinged...success! But now to the app for the litmus test. The web app worked, and everything and everyone was now happy. Not bad for a Monday.  :-D Hope this helps, Mark

    Read the article

  • ASP.NET MVC2 Implementing Custom RoleManager problem

    - by ile
    To create a custom membership provider I followed these instructions: http://stackoverflow.com/questions/2771094/asp-net-mvc2-custom-membership and these: http://mattwrock.com/post/2009/10/14/Implementing-custom-Membership-Provider-and-Role-Provider-for-Authinticating-ASPNET-MVC-Applications.aspx So far, I've managed to implement custom membership provider and that part works fine. RoleManager still needs some modifications... Project structure: SAMembershipProvider.cs: public class SAMembershipProvider : MembershipProvider { #region - Properties - private int NewPasswordLength { get; set; } private string ConnectionString { get; set; } public bool enablePasswordReset { get; set; } public bool enablePasswordRetrieval { get; set; } public bool requiresQuestionAndAnswer { get; set; } public bool requiresUniqueEmail { get; set; } public int maxInvalidPasswordAttempts { get; set; } public int passwordAttemptWindow { get; set; } public MembershipPasswordFormat passwordFormat { get; set; } public int minRequiredNonAlphanumericCharacters { get; set; } public int minRequiredPasswordLength { get; set; } public string passwordStrengthRegularExpression { get; set; } public override string ApplicationName { get; set; } public override bool EnablePasswordRetrieval { get { return enablePasswordRetrieval; } } public override bool EnablePasswordReset { get { return enablePasswordReset; } } public override bool RequiresQuestionAndAnswer { get { return requiresQuestionAndAnswer; } } public override int MaxInvalidPasswordAttempts { get { return maxInvalidPasswordAttempts; } } public override int PasswordAttemptWindow { get { return passwordAttemptWindow; } } public override bool RequiresUniqueEmail { get { return requiresUniqueEmail; } } public override MembershipPasswordFormat PasswordFormat { get { return passwordFormat; } } public override int MinRequiredPasswordLength { get { return minRequiredPasswordLength; } } public override int MinRequiredNonAlphanumericCharacters { get { return minRequiredNonAlphanumericCharacters; } } public override string PasswordStrengthRegularExpression { get { return passwordStrengthRegularExpression; } } #endregion #region - Methods - public override void Initialize(string name, NameValueCollection config) { throw new NotImplementedException(); } public override bool ChangePassword(string username, string oldPassword, string newPassword) { throw new NotImplementedException(); } public override bool ChangePasswordQuestionAndAnswer(string username, string password, string newPasswordQuestion, string newPasswordAnswer) { throw new NotImplementedException(); } public override MembershipUser CreateUser(string username, string password, string email, string passwordQuestion, string passwordAnswer, bool isApproved, object providerUserKey, out MembershipCreateStatus status) { throw new NotImplementedException(); } public override bool DeleteUser(string username, bool deleteAllRelatedData) { throw new NotImplementedException(); } public override MembershipUserCollection FindUsersByEmail(string emailToMatch, int pageIndex, int pageSize, out int totalRecords) { throw new NotImplementedException(); } public override MembershipUserCollection FindUsersByName(string usernameToMatch, int pageIndex, int pageSize, out int totalRecords) { throw new NotImplementedException(); } public override MembershipUserCollection GetAllUsers(int pageIndex, int pageSize, out int totalRecords) { throw new NotImplementedException(); } public override int GetNumberOfUsersOnline() { throw new NotImplementedException(); } public override string GetPassword(string username, string answer) { throw new NotImplementedException(); } public override MembershipUser GetUser(object providerUserKey, bool userIsOnline) { throw new NotImplementedException(); } public override MembershipUser GetUser(string username, bool userIsOnline) { throw new NotImplementedException(); } public override string GetUserNameByEmail(string email) { throw new NotImplementedException(); } protected override void OnValidatingPassword(ValidatePasswordEventArgs e) { base.OnValidatingPassword(e); } public override string ResetPassword(string username, string answer) { throw new NotImplementedException(); } public override bool UnlockUser(string userName) { throw new NotImplementedException(); } public override void UpdateUser(MembershipUser user) { throw new NotImplementedException(); } public override bool ValidateUser(string username, string password) { AccountRepository accountRepository = new AccountRepository(); var user = accountRepository.GetUser(username); if (string.IsNullOrEmpty(password.Trim())) return false; if (user == null) return false; //string hash = EncryptPassword(password); var email = user.Email; var pass = user.Password; if (user == null) return false; if (pass == password) { //User = user; return true; } return false; } #endregion protected string EncryptPassword(string password) { //we use codepage 1252 because that is what sql server uses byte[] pwdBytes = Encoding.GetEncoding(1252).GetBytes(password); byte[] hashBytes = System.Security.Cryptography.MD5.Create().ComputeHash(pwdBytes); return Encoding.GetEncoding(1252).GetString(hashBytes); } } SARoleProvider.cs public class SARoleProvider : RoleProvider { AccountRepository accountRepository = new AccountRepository(); public override bool IsUserInRole(string username, string roleName) { return true; } public override string ApplicationName { get { throw new NotImplementedException(); } set { throw new NotImplementedException(); } } public override void AddUsersToRoles(string[] usernames, string[] roleNames) { throw new NotImplementedException(); } public override void RemoveUsersFromRoles(string[] usernames, string[] roleNames) { throw new NotImplementedException(); } public override void CreateRole(string roleName) { throw new NotImplementedException(); } public override bool DeleteRole(string roleName, bool throwOnPopulatedRole) { throw new NotImplementedException(); } public override bool RoleExists(string roleName) { throw new NotImplementedException(); } public override string[] GetRolesForUser(string username) { int rolesCount = 0; IQueryable<RoleViewModel> rolesNames; try { // get roles for this user from DB... rolesNames = accountRepository.GetRolesForUser(username); rolesCount = rolesNames.Count(); } catch (Exception ex) { throw ex; } string[] roles = new string[rolesCount]; int counter = 0; foreach (var item in rolesNames) { roles[counter] = item.RoleName.ToString(); counter++; } return roles; } public override string[] GetUsersInRole(string roleName) { throw new NotImplementedException(); } public override string[] FindUsersInRole(string roleName, string usernameToMatch) { throw new NotImplementedException(); } public override string[] GetAllRoles() { throw new NotImplementedException(); } } AccountRepository.cs public class RoleViewModel { public string RoleName { get; set; } } public class AccountRepository { private DB db = new DB(); public User GetUser(string email) { return db.Users.SingleOrDefault(d => d.Email == email); } public IQueryable<RoleViewModel> GetRolesForUser(string email) { var result = ( from role in db.Roles join user in db.Users on role.RoleID equals user.RoleID where user.Email == email select new RoleViewModel { RoleName = role.Name }); return result; } } webconfig <membership defaultProvider="SAMembershipProvider" userIsOnlineTimeWindow="15"> <providers> <clear/> <add name="SAMembershipProvider" type="SA_Contacts.Membership.SAMembershipProvider, SA_Contacts" connectionStringName ="ShinyAntConnectionString" /> </providers> </membership> <roleManager defaultProvider="SARoleProvider" enabled="true" cacheRolesInCookie="true"> <providers> <clear/> <add name="SARoleProvider" type="SA_Contacts.Membership.SARoleProvider" connectionStringName ="ShinyAntConnectionString" /> </providers> </roleManager> AccountController.cs: public class AccountController : Controller { SAMembershipProvider provider = new SAMembershipProvider(); AccountRepository accountRepository = new AccountRepository(); public AccountController() { } public ActionResult LogOn() { return View(); } [AcceptVerbs(HttpVerbs.Post)] public ActionResult LogOn(string userName, string password, string returnUrl) { if (!ValidateLogOn(userName, password)) { return View(); } var user = accountRepository.GetUser(userName); var userFullName = user.FirstName + " " + user.LastName; FormsAuthentication.SetAuthCookie(userFullName, false); if (!String.IsNullOrEmpty(returnUrl) && returnUrl != "/") { return Redirect(returnUrl); } else { return RedirectToAction("Index", "Home"); } } public ActionResult LogOff() { FormsAuthentication.SignOut(); return RedirectToAction("Index", "Home"); } private bool ValidateLogOn(string userName, string password) { if (String.IsNullOrEmpty(userName)) { ModelState.AddModelError("username", "You must specify a username."); } if (String.IsNullOrEmpty(password)) { ModelState.AddModelError("password", "You must specify a password."); } if (!provider.ValidateUser(userName, password)) { ModelState.AddModelError("_FORM", "The username or password provided is incorrect."); } return ModelState.IsValid; } } In some testing controller I have following: [Authorize] public class ContactsController : Controller { SAMembershipProvider saMembershipProvider = new SAMembershipProvider(); SARoleProvider saRoleProvider = new SARoleProvider(); // // GET: /Contact/ public ActionResult Index() { string[] roleNames = Roles.GetRolesForUser("[email protected]"); // Outputs admin ViewData["r1"] = roleNames[0].ToString(); // Outputs True // I'm not even sure if this method is the same as the one below ViewData["r2"] = Roles.IsUserInRole("[email protected]", roleNames[0].ToString()); // Outputs True ViewData["r3"] = saRoleProvider.IsUserInRole("[email protected]", "admin"); return View(); } If I use attribute [Authorize] then everything works ok, but if I use [Authorize(Roles="admin")] then user is always rejected, like he is not in role. Any idea of what could be wrong here? Thanks in advance, Ile

    Read the article

  • How do I migrate from a basic plaintext password authentication to an OAuth based system?

    - by different
    Hello, Found out today that Twitter will be discontinuing its basic authentication for its API; the push is now towards OAuth but I don’t have a clue as to how to use it or whether it’s the right path for me. All I want to be able to do is post a tweet linking to the most recently published post when I hit publish. Currently I’m sending the login credentials for my Twitter account as plaintext, which I realise isn’t that secure but as my site is fairly small it isn’t an issue at least for now. I’m using this basic PHP code: $status = urlencode(stripslashes(urldecode("Test tweet"))); $tweetUrl = 'http://www.twitter.com/statuses/update.xml'; $curl = curl_init(); curl_setopt($curl, CURLOPT_URL, "$tweetUrl"); curl_setopt($curl, CURLOPT_CONNECTTIMEOUT, 2); curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1); curl_setopt($curl, CURLOPT_POST, 1); curl_setopt($curl, CURLOPT_POSTFIELDS, "status=$status"); curl_setopt($curl, CURLOPT_USERPWD, "$username:$password"); $result = curl_exec($curl); $resultArray = curl_getinfo($curl); if ($resultArray['http_code'] == 200) { curl_close($curl); $this->redirect(""); } else { curl_close($curl); echo 'Could not post to Twitter. Please go back and try again.'; } How do I move from this to an OAuth system? Do I need to?

    Read the article

  • Sending a password securely using gwt and app engine?

    - by user246114
    Hi, I set up session handling on a google app project. This is supposed to allow my users to login and maintain state across pages. I just dumped it into the default greeting service to try it out: public class GreetingServiceImpl extends RemoteServiceServlet implements GreetingService { public void sessionTest(String username) { HttpSession session = getThreadLocalRequest().getSession(false); session.setAttribute("username", username); } } then attempting to pull it out in my landing project.jsp page: <% String username = null; HttpSession mysession = request.getSession(false); if (mysession.getAttribute("username") != null) { username = (String)mysession.getAttribute("username"); } else { username = "(not logged in yet)"; } <p>You are: <%= username %> </p> %> It works, but I don't know how to send the data in sessionTest() securely. If I were sending the user's password in there too, it would be in the clear. This would be ok (I think) if I was using https, but google app engine does not allow you to use https under custom domains (like www.mysite.com), they have to be under the (mysite.appspot.com) domain. I'm kind of stuck here - how do we send passwords securely? If I was using php, I think I could use digest authentication (I'm not too experienced here) - can we do something like that with gwt + gae? Thanks

    Read the article

  • Quick guide to Oracle IRM 11g: Server configuration

    - by Simon Thorpe
    Quick guide to Oracle IRM 11g index Welcome to the second article in this quick quide to Oracle IRM 11g. Hopefully you've just finished the first article which takes you through deploying the software onto a Linux server. This article walks you through the configuration of this new service and contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Create IRM WebLogic Domain Starting the Admin Server and initial configuration Introduction In the previous article the database was prepared, the WebLogic Application Server installed and the files required for an IRM server installed. But we don't actually have a configured system yet. We need to now create a WebLogic Domain in which the IRM server will run, then configure some of the settings and crypography so that we can create a context and be ready to seal some content and test it all works. This article doesn't cover the configuration of SSL communication from client to server. This is quite a big topic and a separate article has been dedicated for this area. In these articles I also use the hostname, irm.company.internal to reference the IRM server and later on use the hostname irm.company.com in reference to the public facing service. Create IRM WebLogic Domain First step is creating the WebLogic domain, in a console switch to the newly created IRM installation folder as shown below and we will run the domain configuration wizard. [oracle@irm /]$ cd /oracle/middleware/Oracle_IRM/common/bin [oracle@irm bin]$ ./config.sh First thing the wizard will ask is if you wish to create a new or extend an existing domain. This guide is creating a standalone system so you should select to create a new domain. Next step is to choose what technologies from the Oracle ECM Suite you wish this domain to host. You are only interested in selecting the option "Oracle Information Rights Management". When you select this check box you will notice that it also selects "Oracle Enterprise Manager" and "Oracle JRF" as these are dependencies of the IRM server. You then need to specify where you wish to place the domain files. I usually just change the domain name from base_domain or irm_domain and leave the others with their defaults. Now the domain will have a single user initially and by default this user is called "weblogic". I usually change this account name to "sysadmin" or "administrator", but in this guide lets just accept the default. With respects to the next dialog, again for eval or dev reasons, leave the server startup mode as development. The JDK should also be automatically detected. We now need to provide details of the database. This guide is using the Oracle 11gR2 database and the settings I used can be seen in the image to the right. There is a lot of configuration that can now be done for the admin server, any managed servers and where the deployments reside. In this guide I am leaving all of these to their defaults so do not check any of the boxes. However I will on this blog be detailing later how you can go back and setup things such as automated startup of an IRM server which require changes to these default settings. But for now, lets leave it all alone and just click next. Now we are ready to install. Note that from this dialog you can scroll the left window and see there are going to be two servers created from the defaults. The AdminServer which is where you modify settings for the WebLogic Server and also hosts the Oracle Enterprise Manager for IRM which allows to monitor the IRM service performance and also make service related settings (which we shortly do below) and the IRM_server1 which hosts the actual IRM services themselves. So go right ahead and hit create, the process is pretty quick and usually under 10 minutes. When the domain creation ends, it will give you the URL to the admin server. It's worth noting this down and the URL is usually; http://irm.company.internal:7001 Starting the Admin Server and initial configuration First thing to do is to start the WebLogic Admin server and review the initial IRM server settings. In this guide we are going to run the Admin server and IRM server in console windows, in another article I will discuss running these as background services. So for now, start a console and run the Admin server by doing the following. cd /oracle/middleware/user_projects/domains/irm_domain/ ./startWebLogic.sh Wait for the server to start, you are looking for the following line to be reported in the console window. <BEA-00360><Server started in RUNNING mode> First step is configuring the IRM service via Enterprise Manager. Now that the Admin server is running you can point a browser at http://irm.company.internal:7001/em. Login with the username and password you supplied when you created the domain. In Enterprise Manager the IRM service administrator is able to make server wide configuration. However finding where to access the pages with these settings can be a bit of a challenge. After logging in on the left you'll see a tree containing elements of the Enterprise Manager farm Farm_irm_domain. Open up Content Management, then Information Rights Management and finally select the IRM node. On the right then select the IRM menu item, navigate to the Administration section and now we have four options, for now, we are just going to look at General Settings. The image on the right proves that a picture is worth a thousand words (or 113 in this case). The General Settings page allows you to set the cryptographic algorithms used for protecting sealed content. Unless you have a burning need to increase the key lengths or you need to comply to a regulation or government mandate, AES192 is a good start. You can change this later on without worry. The most important setting here we need to make is the Server URL. In this blog article I go over why this URL is so important, basically every single piece of content you protect with Oracle IRM is going to have this URL embedded in it, so if it's wrong or unresolvable, then nobody can open the secured documents. Note that in our environment we have yet to do any SSL configuration of the service. If you intend to build a server without SSL, then use http as the protocol instead of https. But I would recommend using SSL and setting this up is described in the next article. I would also probably up the device count from 1 to 3. This means that any user can retrieve rights to access content onto 3 computers at any one time. The default of 1 doesn't really make sense in development, evaluation nor even production environments and my experience is that 3 is a better number. Next step is to create the keystore for the IRM server. When a classification (called a context) is created, Oracle IRM generates a unique set of symmetric keys which are used to secure the content itself. These keys are then encrypted with a set of "wrapper" asymmetric cryptography keys which are stored externally to the server either in a Java Key Store or a HSM. These keys need to be generated and the following shows my commands and the resulting output. I have greyed out the responses from the commands so you can see the input a little easier. [oracle@irmsrv ~]$ cd /oracle/middleware/wlserver_10.3/server/bin/ [oracle@irmsrv bin]$ ./setWLSEnv.sh CLASSPATH=/oracle/middleware/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/middleware/patch_ocp353/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.6.0_18/lib/tools.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/middleware/modules/features/weblogic.server.modules_10.3.3.0.jar:/oracle/middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar: PATH=/oracle/middleware/wlserver_10.3/server/bin:/oracle/middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.6.0_18/jre/bin:/usr/java/jdk1.6.0_18/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin Your environment has been set. [oracle@irmsrv bin]$ cd /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/ [oracle@irmsrv fmwconfig]$ keytool -genkeypair -alias oracle.irm.wrap -keyalg RSA -keysize 2048 -keystore irm.jks Enter keystore password: Re-enter new password: What is your first and last name? [Unknown]: Simon Thorpe What is the name of your organizational unit? [Unknown]: Oracle What is the name of your organization? [Unknown]: Oracle What is the name of your City or Locality? [Unknown]: San Francisco What is the name of your State or Province? [Unknown]: CA What is the two-letter country code for this unit? [Unknown]: US Is CN=Simon Thorpe, OU=Oracle, O=Oracle, L=San Francisco, ST=CA, C=US correct? [no]: yes Enter key password for (RETURN if same as keystore password): At this point we now have an irm.jks in the directory /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig. The reason we store it here is this folder would be backed up as part of a domain backup. As with any cryptographic technology, DO NOT LOSE THESE KEYS OR THIS KEY STORE. Once you've sealed content against a context, the keys will be wrapped with these keys, lose these keys, and you can't get access to any secured content, pretty important. Now we've got the keys created, we need to go back to the IRM Enterprise Manager and set the location of the key store. Going back to the General Settings page in Enterprise Manager scroll down to Keystore Settings. Leave the type as JKS but change the location to; /oracle/Middleware/user_projects/domains/irm_domain/config/fmwconfig/irm.jks and hit Apply. The final step with regards to the key store is we need to tell the server what the password is for the Java Key Store so that it can be opened and the keys accessed. Once more fire up a console window and run these commands (again i've greyed out the clutter to see the commands easier). You will see dummy passed into the commands, this is because the command asks for a username, but in this instance we don't use one, hence the value dummy is passed and it isn't used. [oracle@irmsrv fmwconfig]$ cd /oracle/middleware/Oracle_IRM/common/bin/ [oracle@irmsrv bin]$ ./wlst.sh ... lots of settings fly by... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands wls:/offline>connect('weblogic','password','t3://irmsrv.us.oracle.com:7001') Connecting to t3://irmsrv.us.oracle.com:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'irm_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. wls:/irm_domain/serverConfig>createCred("IRM","keystore:irm.jks","dummy","password") Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root. For more help, use help(domainRuntime)wls:/irm_domain/serverConfig>createCred("IRM","key:irm.jks:oracle.irm.wrap","dummy","password") Already in Domain Runtime Tree wls:/irm_domain/serverConfig> At last we are now ready to fire up the IRM server itself. The domain creation created a managed server called IRM_server1 and we need to start this, use the following commands in a new console window. cd /oracle/middleware/user_projects/domains/irm_domain/bin/ ./startManagedWebLogic.sh IRM_server1 This will start up the server in the console, unlike the Admin server, you need to provide the username and password for the service to start. Enter in your weblogic username and password when prompted. You can change this behavior by putting the password into a boot.properties file, read more about this in the WebLogic Server documentation. Once running, wait until you see the line; <Notice><WebLogicServer><BEA-000360><Server started in RUNNING mode> At this point we can now login to the Oracle IRM Management Website at the URL. http://irm.company.internal:1600/irm_rights/ The server is just configured for HTTP at the moment, no SSL involved. Just want to ensure we can get a working system up and running. You should now see a login like the image on the right and you can now login using your weblogic username and password. The next article in this guide goes over adding SSL and now testing your server by actually adding a few users, sealing some content and opening this content as a user.

    Read the article

  • Securing an ADF Application using OES11g: Part 2

    - by user12587121
    To validate the integration with OES we need a sample ADF Application that is rich enough to allow us to test securing the various ADF elements.  To achieve this we can add some items including bounded task flows to the application developed in this tutorial. A sample JDeveloper 11.1.1.6 project is available here. It depends on the Fusion Order Demo (FOD) database schema which is easily created using the FOD build scripts.In the deployment we have chosen to enable only ADF Authentication as we will delegate Authorization, mostly, to OES.The welcome page of the application with all the links exposed looks as follows: The Welcome, Browse Products, Browse Stock and System Administration links go to pages while the Supplier Registration and Update Stock are bounded task flows.  The Login link goes to a basic login page and once logged in a link is presented that goes to a logout page.  Only the Browse Products and Browse Stock pages are really connected to the database--the other pages and task flows do not really perform any operations on the database. Required Security Policies We make use of a set of test users and roles as decscribed on the welcome page of the application.  In order to exercise the different authorization possibilities we would like to enforce the following sample policies: Anonymous users can see the Login, Welcome and Supplier Registration links. They can also see the Welcome page, the Login page and follow the Supplier Registration task flow.  They can see the icon adjacent to the Login link indicating whether they have logged in or not. Authenticated users can see the Browse Product page. Only staff granted the right can see the Browse Product page cost price value returned from the database and then only if the value is below a configurable limit. Suppliers and staff can see the Browse Stock links and pages.  Customers cannot. Suppliers can see the Update Stock link but only those with the update permission are allowed to follow the task flow that it launches.  We could hide the link but leave it exposed here so we can easily demonstrate the method call activity protecting the task flow. Only staff granted the right can see the System Administration link and the System Administration page it accesses. Implementing the required policies In order to secure the application we will make use of the following techniques: EL Expressions and Java backing beans: JSF has the notion of EL expressions to reference data from backing Java classes.  We use these to control the presentation of links on the navigation page which respect the security contraints.  So a user will not see links that he is not allowed to click on into. These Java backing beans can call on to OES for an authorization decision.  Important Note: naturally we would configure the WLS domain where our ADF application is running as an OES WLS SM, which would allow us to efficiently query OES over the PEP API.  However versioning conflicts between OES 11.1.1.5 and ADF 11.1.1.6 mean that this is not possible.  Nevertheless, we can make use of the OES RESTful gateway technique from this posting in order to call into OES. You can easily create and manage backing beans in Jdeveloper as follows: Custom ADF Phase Listener: ADF extends the JSF page lifecycle flow and allows one to hook into the flow to intercept page rendering.  We use this to put a check prior to rendering any protected pages, again calling on to OES via the backing bean.  Phase listeners are configured in the adf-settings.xml file.  See the MyPageListener.java class in the project.  Here, for example,  is the code we use in the listener to check for allowed access to the sysadmin page, navigating back to the welcome page if authorization is not granted:                         if (page != null && (page.equals("/system.jspx") || page.equals("/system"))){                             System.out.println("MyPageListener: Checking Authorization for /system");                             if (getValue("#{oesBackingBean.UIAccessSysAdmin}").toString().equals("false") ){                                   System.out.println("MyPageListener: Forcing navigation away from system" +                                       "to welcome");                                 NavigationHandler nh = fc.getApplication().getNavigationHandler();                                   nh.handleNavigation(fc, null, "welcome");                               } else {                                 System.out.println("MyPageListener: access allowed");                              }                         } Method call activity: our app makes use of bounded task flows to implement the sequence of pages that update the stock or allow suppliers to self register.  ADF takes care of ensuring that a bounded task flow can be entered by only one page.  So a way to protect all those pages is to make a call to OES in the first activity and then either exit the task flow or continue depending on the authorization decision.  The method call returns a String which contains the name of the transition to effect. This is where we configure the method call activity in JDeveloper: We implement each of the policies using the above techniques as follows: Policies 1 and 2: as these policies concern the coarse grained notions of controlling access to anonymous and authenticated users we can make use of the container’s security constraints which can be defined in the web.xml file.  The allPages constraint is added automatically when we configure Authentication for the ADF application.  We have added the “anonymousss” constraint to allow access to the the required pages, task flows and icons: <security-constraint>    <web-resource-collection>      <web-resource-name>anonymousss</web-resource-name>      <url-pattern>/faces/welcome</url-pattern>      <url-pattern>/afr/*</url-pattern>      <url-pattern>/adf/*</url-pattern>      <url-pattern>/key.png</url-pattern>      <url-pattern>/faces/supplier-reg-btf/*</url-pattern>      <url-pattern>/faces/supplier_register_complete</url-pattern>    </web-resource-collection>  </security-constraint> Policy 3: we can place an EL expression on the element representing the cost price on the products.jspx page: #{oesBackingBean.dataAccessCostPrice}. This EL Expression references a method in a Java backing bean that will call on to OES for an authorization decision.  In OES we model the authorization requirement by requiring the view permission on the resource /MyADFApp/data/costprice and granting it only to the staff application role.  We recover any obligations to determine the limit.  Policy 4: is implemented by putting an EL expression on the Browse Stock link #{oesBackingBean.UIAccessBrowseStock} which checks for the view permission on the /MyADFApp/ui/stock resource. The stock.jspx page is protected by checking for the same permission in a custom phase listener—if the required permission is not satisfied then we force navigation back to the welcome page. Policy 5: the Update Stock link is protected with the same EL expression as the Browse Link: #{oesBackingBean.UIAccessBrowseStock}.  However the Update Stock link launches a bounded task flow and to protect it the first activity in the flow is a method call activity which will execute an EL expression #{oesBackingBean.isUIAccessSupplierUpdateTransition}  to check for the update permission on the /MyADFApp/ui/stock resource and either transition to the next step in the flow or terminate the flow with an authorization error. Policy 6: the System Administration link is protected with an EL Expression #{oesBackingBean.UIAccessSysAdmin} that checks for view access on the /MyADF/ui/sysadmin resource.  The system page is protected in the same way at the stock page—the custom phase listener checks for the same permission that protects the link and if not satisfied we navigate back to the welcome page. Testing the Application To test the application: deploy the OES11g Admin to a WLS domain deploy the OES gateway in a another domain configured to be a WLS SM. You must ensure that the jps-config.xml file therein is configured to allow access to the identity store, otherwise the gateway will not b eable to resolve the principals for the requested users.  To do this ensure that the following elements appear in the jps-config.xml file: <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider">             <description>LDAP-based IdentityStore Provider</description>  </serviceProvider> <serviceInstance name="idstore.ldap" provider="idstore.ldap.provider">             <property name="idstore.config.provider" value="oracle.security.jps.wls.internal.idstore.WlsLdapIdStoreConfigProvider"/>             <property name="CONNECTION_POOL_CLASS" value="oracle.security.idm.providers.stdldap.JNDIPool"/></serviceInstance> <serviceInstanceRef ref="idstore.ldap"/> download the sample application and change the URL to the gateway in the MyADFApp OESBackingBean code to point to the OES Gateway and deploy the application to an 11.1.1.6 WLS domain that has been extended with the ADF JRF files. You will need to configure the FOD database connection to point your database which contains the FOD schema. populate the OES Admin and OES Gateway WLS LDAP stores with the sample set of users and groups.  If  you have configured the WLS domains to point to the same LDAP then it would only have to be done once.  To help with this there is a directory called ldap_scripts in the sample project with ldif files for the test users and groups. start the OES Admin console and configure the required OES authorization policies for the MyADFApp application and push them to the WLS SM containing the OES Gateway. Login to the MyADFApp as each of the users described on the login page to test that the security policy is correct. You will see informative logging from the OES Gateway and the ADF application to their respective WLS consoles. Congratulations, you may now login to the OES Admin console and change policies that will control the behaviour of your ADF application--change the limit value in the obligation for the cost price for example, or define Role Mapping policies to determine staff access to the system administration page based on user profile attributes. ADF Development Notes Some notes on ADF development which are probably typical gotchas: May need this on WLS startup in order to allow us to overwrite credentials for the database, the signal here is that there is an error trying to access the data base: -Djps.app.credential.overwrite.allowed=true Best to call Bounded Task flows via a CommandLink (as opposed to a go link) as you cannot seem to start them again from a go link, even having completed the task flow correctly with a return activity. Once a bounded task flow (BTF) is initated it must complete correctly  via a return activity—attempting to click on any other link whilst in the context of a  BTF has no effect.  See here for example: When using the ADF Authentication only security approach it seems to be awkward to allow anonymous access to the welcome and registration pages.  We can achieve anonymous access using the web.xml security constraint shown above (where no auth-constraint is specified) however it is not clear what needs to be listed in there….for example the /afr/* and /adf/* are in there by trial and error as sometimes the welcome page will not render if we omit those items.  I was not able to use the default allPages constraint with for example the anonymous-role or the everyone WLS group in order to be able to allow anonymous access to pages. The ADF security best practice advises placing all pages under the public_html/WEB-INF folder as then ADF will not allow any direct access to the .jspx pages but will only allow acces via a link of the form /faces/welcome rather than /faces/welcome.jspx.  This seems like a very good practice to follow as having multiple entry points to data is a source of confusion in a web application (particulary from a security point of view). In Authentication+Authorization mode only pages with a Page definition file are protected.  In order to add an emty one right click on the page and choose Go to Page Definition.  This will create an empty page definition and now the page will require explicit permission to be seen. It is advisable to give a unique context root via the weblogic.xml for the application, as otherwise the application will clash with any other application with the same context root and it will not deploy

    Read the article

  • System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host

    - by coffeeaddict
    We have 2 identical database tables on our dev server. In both is a table that holds an X509Certificate2 data in one of its fields. When I grab the cert along with the password that I've been using all along, it works over the first database just fine. I run the same code though over the 2nd database and get this error and I don't get why if the setup is exactly the same and the database is also on this server. So I'm not sure why when I switch my connection string to talk to Database2, even though it's setup the same and the code I'm running over it is the same, it complains. Here's the stack trace: An existing connection was forcibly closed by the remote host Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SocketException (0x2746): An existing connection was forcibly closed by the remote host] System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) +232 [IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.] System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) +7035903 System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) +58 System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) +116 System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +123 System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86 System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +123 System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86 System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +123 System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86 System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +123 System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) +7184357 System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) +217 System.Threading.ExecutionContext.runTryCode(Object userData) +376 System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) +0 System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) +98 System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) +1134 System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) +88 System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) +20 System.Net.ConnectStream.WriteHeaders(Boolean async) +360 [WebException: The underlying connection was closed: An unexpected error occurred on a send.] System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) +857631 System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) +10 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +243 Pmall.PayPal.PayPalApi.PayPalAPIAASoapBinding.SetExpressCheckout(SetExpressCheckoutReq SetExpressCheckoutReq) in C:\www\ssss\ssss\ssss\ssss\Reference.cs:1304 ssss.PayPal.ExpressCheckout.PayPalCheckout.SetExpressCheckout(PaymentDetailsType[] paymentDetails, String returnURL, String cancelURL, PayPalPaymentFlowType paymentFlowType) in C:\www\ssss\ssss\ssss\PayPalCheckout.cs:96 ssss.Web.ssss.SetExpressCheckout() in C:\www\ssss\ssss\ssss.aspx.cs:83 ssss.Web.ssss.Page_Load(Object sender, EventArgs e) in C:\www\ssss\ssss\Register.aspx.cs:24 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42 System.Web.UI.Control.OnLoad(EventArgs e) +132 System.Web.UI.Control.LoadRecursive() +66 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428

    Read the article

  • Claims-based Identity Terminology

    - by kaleidoscope
    There are several terms commonly used to describe claims-based identity, and it is important to clearly define these terms. · Identity In terms of Access Control, the term identity will be used to refer to a set of claims made by a trusted issuer about the user. · Claim You can think of a claim as a bit of identity information, such as name, email address, age, and so on. The more claims your service receives, the more you’ll know about the user who is making the request. · Security Token The user delivers a set of claims to your service piggybacked along with his or her request. In a REST Web service, these claims are carried in the Authorization header of the HTTP(S) request. Regardless of how they arrive, claims must somehow be serialized, and this is managed by security tokens. A security token is a serialized set of claims that is signed by the issuing authority. · Issuing Authority & Identity Provider An issuing authority has two main features. The first and most obvious is that it issues security tokens. The second feature is the logic that determines which claims to issue. This is based on the user’s identity, the resource to which the request applies, and possibly other contextual data such as time of day. This type of logic is often referred to as policy[1]. There are many issuing authorities, including Windows Live ID, ADFS, PingFederate from Ping Identity (a product that exposes user identities from the Java world), Facebook Connect, and more. Their job is to validate some credential from the user and issue a token with an identifier for the user's account and  possibly other identity attributes. These types of authorities are called identity providers (sometimes shortened as IdP). It’s ultimately their responsibility to answer the question, “who are you?” and ensure that the user knows his or her password, is in possession of a smart card, knows the PIN code, has a matching retinal scan, and so on. · Security Token Service (STS) A security token service (STS) is a technical term for the Web interface in an issuing authority that allows clients to request and receive a security token according to interoperable protocols that are discussed in the following section. This term comes from the WS-Trust standard, and is often used in the literature to refer to an issuing authority. STS when used from developer point of view indicates the URL to use to request a token from an issuer. For more details please refer to the link http://www.microsoft.com/windowsazure/developers/dotnetservices/ Geeta, G

    Read the article

  • Asp.Net MVC Data Annotations. How to get client side validation on 2 properties being equal

    - by Mark
    How do you get client side validation on two properties such as the classic password confirm password scenario. I'm using a metadata class based on EF mapping to my DB table, heres the code. The commented out attributes on my class will get me server side validation but not client side. [MetadataType(typeof(MemberMD))] public partial class Member { //[CustomValidation(typeof(MemberMD), "Verify", ErrorMessage = "The password and confirmation password did not match.")] //[PropertiesMustMatch("Password", "ConfirmPassword", ErrorMessage = "The password and confirmation password did not match.")] public class MemberMD { [Required(ErrorMessage = "Name is required.")] [StringLength(50, ErrorMessage = "No more than 50 characters")] public object Name { get; set; } [Required(ErrorMessage = "Email is required.")] [StringLength(50, ErrorMessage = "No more than 50 characters.")] [RegularExpression(".+\\@.+\\..+", ErrorMessage = "Valid email required e.g. [email protected]")] public object Email { get; set; } [Required(ErrorMessage = "Password is required.")] [StringLength(30, ErrorMessage = "No more than 30 characters.")] [RegularExpression("[\\S]{6,}", ErrorMessage = "Must be at least 6 characters.")] public object Password { get; set; } [Required] public object ConfirmPassword { get; set; } [Range(0, 150), Required] public object Age { get; set; } [Required(ErrorMessage = "Postcode is required.")] [RegularExpression(@"^[a-zA-Z0-9 ]{1,10}$", ErrorMessage = "Postcode must be alphanumeric and no more than 10 characters in length")] public object Postcode { get; set; } [DisplayName("Security Question")] [Required] public object SecurityQuestion { get; set; } [DisplayName("Security Answer")] [Required] [StringLength(50, ErrorMessage = "No more than 50 characters.")] public object SecurityAnswer { get; set; } public static ValidationResult Verify(MemberMD t) { if (t.Password == t.ConfirmPassword) return ValidationResult.Success; else return new ValidationResult(""); } } Any help would be greatly appreciated, as I have only been doing this 5 months please try not to blow my mind.

    Read the article

  • XML deserializer (Iserialzable)

    - by user311130
    Hey everybody, I have a class in c# that implements Iserialzable. I'm using a XMLSerializer that produces a XML from instance of that class. I get the following XML: <?xml version="1.0"?> <Configuration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <SessionConfiguration> <RemoteMachineName>HV-BENDA</RemoteMachineName> </SessionConfiguration> <SessionsCredentialsList> <CredentialsItem> <User>test0</User> <Password>Pa$$word1</Password> </CredentialsItem> <CredentialsItem> <User>test1</User> <Password>Pa$$word1</Password> </CredentialsItem> <CredentialsItem> <User>test2</User> <Password>Pa$$word1</Password> </CredentialsItem> <CredentialsItem> <User>test3</User> <Password>Pa$$word1</Password> </CredentialsItem> <CredentialsItem> <User>test4</User> <Password>Pa$$word1</Password> </CredentialsItem> </SessionsCredentialsList> <TIME_OUT /> <LOCAL_USERS_NUM>5</LOCAL_USERS_NUM> </Configuration> At some later point in the code I use a XMLSerializer again to deserial that XML document. and I get the following error: {"There is an error in XML document (1, 1)."} Inner exception: {"Data at the root level is invalid. Line 1, position 1."} Do someone knows wat could be the problem? All the best

    Read the article

  • Zend Form not in place labbels values, how to move them that they will be exactly above text box?

    - by Yosef
    Hi, I have esthetic's problem. Zend Form not in place label value, how to move them that they will be exactly above text box, and not from left? (I didn't put filters and validation to make this code simpler here) Thanks, Yosef My Code Login.php form: public function init() { $username = new Zend_Form_Element_Text('username'); $username->setLabel("username"); $password = new Zend_Form_Element_Password('password'); $password->setLabel('password'); $this->addElements(array($username, $password)); }

    Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >