Search Results

Search found 10463 results on 419 pages for 'task tracking'.

Page 248/419 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

• Windows 7 with two network cards doesn't route traffic

  - by Tomek

  I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

  Read the article

• Timeout ssh sessions after inactivity?

  - by Insyte

  PCI requirement 8.5.15 states: "If a session has been idle for more than 15 minutes, require the user to re-enter the password to re-activate the terminal." The first, and most obvious, way to deal with ssh sessions that are idling at the bash prompt is by enforcing a read-only, global $TMOUT of 900. Unfortunately, that only covers sessions sitting at the bash prompt. The spirit of the PCI spec would also require killing sessions running top/vim/etc. I've considered writing a */1 cron job that parses the output of "/usr/bin/w" and kills the associated shell, but that seems like a blunt instrument. Any ideas for something that would actually do what the spec requires and just lock the terminal? I've looked at away and vlock; they both seem great for voluntarily locking your terminal, but I need a cron/daemon task that will enforce locking.

  Read the article

• Cisco training basic, entry, ASA/PIX. Help to understand network

  - by Inbr3d

  I need to learn how to configure Cisco ASA/PIX boxes within my network. I have the task to impliment a new ASA 5505 into a new site we purchased. I have over 9 devices linking my sites together and with no support from the previous IT company im finding it hard to get to terms with what they can do and what they are currently doing. I know there are hundreds of guides how to configure them but into an existing environment? can anyone recommend courses within the UK that can help me? Im not much of a book reader, i would need to be able to manage my network after. also, should i seek external contracts to support these devices? as they are critical for our work. thanks

  Read the article

• Make a socket as an user but make it readable and writable by another

  - by user1598585

  I have a software that is run under user A, this software creates a socket in /sockets and the socket should be readable and writable by user B. I have tried setting the directory to have ownership A:A or A:B but when user A creates the socket, it ends up with uid A and gid A. Using ACLs has not helped so far, the default mask is preventing the rights to be effective. rw permisions for B will always turn into jusr r. If what I make is not a socket it will work fine. How can I best accomplish this task? (It is for a web-server where the web-application makes the socket and the web-server software forwards requests to it)

  Read the article

• Storage drives is causting system crash

  - by Chad

  I'm running Centos 5.4 with 750GB(ntfs) and 2TB drives for storage. Originally I installed the 750, everything seemed fine and then I installed the 2TB drive with NTFS already partitioned. I noticed when I would copy a lot of videos it would crash (no mouse or response from server) about 20min into it. After doing some troubleshooting I noticed the 750 would also crash when doing the same task so I decided that NTFS may be the problem. I unmounted the 2TB drive and tried to partition and format it using ext2 but when using parted it would crash at this point "writing inode tables". Looking at the dmesg logs I believe this is the error "mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining". Any idea as to what could be causing this?

  Read the article

• unable to kill process / logout on windows server 2003

  - by vitalik

  My own console .net application stuck in a "ghost" stage. It just shows a window that i can't close. It doesn't show up as a process in the task manager. when i try to "find windows process" using Process Explorer (from sysinternals) it says there is no process that owns that window or something like that. The problem is that it doesn't allow me to logout or reboot the server (remotely) because logoff process keeps waiting on that window to close. shutdown /r /f also is stuck waiting for it. I can probably have somebody go an reboot the server but i'd like to know if there is a way to close that process, close that session or force logout remotely. This is windows server 2003, but i had the same issue on XP just a few days ago.

  Read the article

• Strange ports on default install of W7

  - by Sabre

  I have a base new install of windows 7, and when I went to look for something else I saw the attached netstat output. What concerns me is that this is Windows + Truecrypt + drivers, nothing else installed. The sequential high ranged ports belonging to several different seemingly not out of place services seemed odd. So I torched the install, used Active@ to scrub the disk, re-downloaded the ISO from MSDN, and did a fresh reinstall, viola, they are there again. It just seems out of place, I have seen a many netstats over the years, this one just strikes me as odd, so I started thinking rootkit? (JUst FYI, when I reloaded I named the machine "Error" so that is why the task manager reads the computer name as such.) So I would like to know if anyone else could explain it, and therefore is may be normal, or would they be worried as well, and should I start considering I have some very strange thing occuring on my network?

  Read the article

• How to adjust a single side of rectangular selection made with Marquee Tool?

  - by Alex

  I am struggling to make a selection made of different layers. For example, a button with text and shadow (each in its own layer). I would like to copy it to a image file but it is really hard to select the shadow with a pixel precision. I do not know how to perform such task properly so I use Marquee Tool. However, it is hard to get all 4 sides right from the first attempt. What's worse, I could not find a method to adjust a single side of a selection made by Marquee Tool. Anyone may help what I am doing wrong?

  Read the article

• Filtering ToDo List in Outlook 2010 with multiple Exchange accounts

  - by David LaRocque

  I'm trying to figure out how to get the ToDo list filtered for just one account? I've tried customizing the view, and using the advanced filter to get just one Oulook Data file, but once I do that the filter goes bonkers and I get all sorts of results! I know it's a combination of email flags and true tasks, and tried combining filters to pull those conditions together, and simply can't get it to cooperate. Before 2010, when the only way to get multiple mailboxes was to add additional mailboxes to the primary account, the task list pulled from just the primary account - but of course, the secondary accounts are not cached and available offline.

  Read the article

• Converting Visio (.vsd) files to pdf automatically

  - by Aseques

  I am trying to create a scheduled task to convert all my .vsd files to pdf so all of our devices can read them (linux, mac, smartphones, etc..) and I would prefer not paying for something that can be done with Visio + PDFcreator. The approach of using openoffice doesn't work with .vsd files since it's not a supported format ( Method/tools for batch-converting Microsoft Word files into PDF?) What I've currently is this: 'C:\Program Files\Microsoft Office\Visio11\VISIO.EXE' /pt "Z:\Archive\Files.vsd",-PPDFCREATORPRINTER /nologo That is able to open automatically the document I want and to prepare it to be printed, the only missing part is that it requires me to confirm on the printing dialog. There's some information here: http://support.microsoft.com/kb/314392 but it doesn't explain abotu non interactive printing.

  Read the article

• Why is the resulting file unplayable when I use FFMPEG to convert a MP4 video to ASF?

  - by Fuupoo

  I want to convert an .mp4 file to an .asf file, but I need to keep the size of the file below 150 mb (the server I need to upload the file to can only take files under 150 mb). Basically I want to recontain the .mp4 in an .asf file. The code I'm using currently is ffmpeg input.mp4 -c copy output.asf The command runs, however when I try to play the file on windows media player (I'm on windows xp) I get an error message saying "Windows media player has encountered a problem while playing the file." Anyone have any idea why this is happening? And what other ways I can accomplish this task?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• In Ubuntu I make changes to php.ini but nothing happens

  - by MrAn3

  Hi, Apache with php works well, but none of the changes I make in php.ini have effect, I've even delete all the contents of the file, then restart Apache, and run phpinfo() and surprisingly everything continues working well. The file I'm editing is the one that appears in the phpinfo() like "Loaded Configuration File". (/etc/php5/apache2/php.ini) P.S. I'm running Ubuntu 9.04 and PHP 5.2 Thanks in advance. More Details: I'm restarting with sudo /etc/init.d/apache2 restart, I've also tried sudo /etc/init.d/apache2 stop, and then start, at restarting I get: Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] "which php" did not produce any results. My installation of PHP was done using Synaptic Package Manger, choosing "Mark Packages by task" and then LAMP server. I don't have any clue of what to do...

  Read the article

• RemoteApps and Cached Credentials

  - by user66774

  I'm looking for a guidance on an issue we're having. We are hosting an application over terminal services through RDWeb on Windows 2008 Server. To give users the ability to change their password we've exposed the iisadmpwd to allow the users to change their passwords. When the users change their password, they are prompted to log into broker server, even if they log off of the RDWeb page and log back in. What we've found is that the credentials seem to be cached in memory after logging in. Ending task on TSWBPRXY.EXE, WKSPRT.EXE, closing IE and logging back into the RDWEb page, then launching the application allows the user to log into the application without additional credentials. I'm wondering if there is a better way to either have the user change their password from a web interface, but allow them to reestablish their connection from the RDWeb login page rather than through the RDP login prompt that comes up.

  Read the article

• Display "iftop" on web

  - by DmitrySemenov

  I do iftop -i eth1 > out.txt It does produce the file with "encrypted" UI content such as [(B[)0[[1;80r[[mO[[?7h[[?1h[=[[H[[J[[0;7mO Listening on eth1 [[1;48H[[mO12.5Kb Is it possible to display this as a web xhtml output somehow? cat out.txt on my console does produce a normal iftop window but when I do the same thing over the web I get the content above. I understand that it is "managed" on kernel level. Is the task that I want to perform possible?

  Read the article

• Excel Help: Fill Tool - Drag to the side (across columns) but increase the formula by Row Number.

  - by B-Ballerl

  There are answers out there to this question, but all of them have been under explianed so hence to difficult to coprehend and use them to my advantage. I want to do the seemingly simple (but not) task of Draging a Formula (Filling a series) across Column's while increasing the formula row number relativley. For Example to drag this formula: | =A1 | =A2 | =A3 Some other notes, Transposing by copy paste has proven too difficult for the amount of data. Offset and Indirect has been used by other people to do this but I don't get how they work at all so when I attempt to use them I don't know how to format it to my range. Here's a example photo Idealy we want the dragged section to continue on to fill the formula.

  Read the article

• Outgoing only SMTP server

  - by Din

  I want to setup on my Debian outgoing only SMTP server, so my Web-applications will be able to send mail via it. I don't want to use other hosts because of security and customizability of my own setup. I want to setup Postfix and configure it only in outgoing mode (I don't want it to be a relay). So I want to ask an advice how to do it in the best way. There's no need in users, virtual users, endpoints and other options that Postfix provides. I suppose that I should only attach Postfix to some hostname so my IP address can resolve to it. I also think that Postfix maybe a bit complicated solution for this task. If you know much simpler tool for it, let me know. Thanks.

  Read the article

• Running MySQL as SYSTEM Service in Windows XP

  - by enesviem

  I have this strange problem where I create a database in MySQL and I need to restart mysqld but I can't seem to do it with info the MySQL docs. Then, I kill it from the Task Manager and I can't restart it. When I look at the process, it is run by the SYSTEM, rather than me. When I run mysqld it starts the process by me, not the SYSTEM. Am I shutting it down incorrectly? IS there a way to start this daemon as the SYSTEM?

  Read the article

• Able to send, but not receive from gmail.com within Outlook 2003 (0x800CCC0F)

  - by matt_tm

  In my home network, I'm able to access my @gmail.com and @otherdomain.com accounts via POP3 from Outlook 2003. When accessing from my office network, I'm not able to receive, but am able to send. I get the following error: Task '[email protected] - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).' The POP3 is set to 995 (using SSL), SMTP to 465 (using SSL), Logon using SPA is NOT enabled. There is NO change I make on my system from the office to home network, except my local, internal IP address changes.

  Read the article

• My notebook goes offline automatically after some time

  - by air

  I have about 3 computers and 1 windows 2003 server in office and 1 network printer (HP LJ 2840). My network printer is installed on the server. I an sharing this printer on all clients with windows XP. All other computers are fine only 1 HP laptop. When I start that HP laptop the printer works fine but after some time, printer goes offline and I can't print until I restart the laptop. When that laptop goes to offline mode, I can work on that laptop, I can use shared network drives, I can ping server but it shows offline mode icon in Task bar status area. If i use \\servername I can see the server's shared items and if i go to printers I can't see any printer... I try my best to solve this issue, but I can't. Thanks

  Read the article

• SQL Server 2005 64bit on 16GB machine uses 3.6GB memory only

  - by ArjanP

  Maximum server memory is set to the maxvalue AWE is disabled (should not be needed in 64 bit anyway) Windows Server 2008 Enterprise SP2 It is a virtual server using VMWare If I look in Task Manager the sqlservr.exe process only uses about 3.6 GB of memory. Is that number not real? Shouldn't it attempt to use all available memory? If I run DBCC MEMORYSTATUS I get: VM Reserved 16670136 VM Committed 3640664 It looks like a memory limit I shouldn't be seeing in a 64 bit environment.. how can I get SQL2005 to use more memory?

  Read the article

• How to maintain different active sessions in single firefox and internet explorer?

  - by Anand

  Suppose we are working in Firefox. Now I have opened 3 tabs. In all 3 tabs I need to work on an application e.g. gmail account. i.e. Tab 1 has Account 1, tab 2 has account2 and tab 3 has account 3. I need to do this simultaneously. Please suggest method or add-on to do this task. I also need to do the same in Internet Explorer as well.

  Read the article

• Problem with running a flash Program from pendrive

  - by rajivpradeep

  Hi, I have a USB drive with two partitions in it. one hidden and the other normal. i have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on windows7 and when run on WINXp, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when i copy the application to desktop and run , it runs with no glitch I was facing the same problem on WIN7 too , but it was running as required when i ran it using "Run in Xp mode" and then i applied a SHIM and is running since then as required. the application is built using VC++ 2008 , What might be the problem.

  Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >