Search Results

Search found 13119 results on 525 pages for 'tcp ip'.

Page 248/525 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

  • EC2 custom topology

    - by Methos
    Is there any way to create a desired topology of EC2 instances? For example, can I create a 3 node topology of nodes A, B, C where C gets the public IP address and B and A are connected to it. Something like: Internet <-- C <-- B <-- A B and A only get private IP addresses and there is no way for the traffic to reach A before hitting B and C. This means I can install whatever I want to install on C and B to filter, cache etc. I'm going through EC2 documentation but so far I have not seen anything that talks about it. I will really appreciate if anyone knows how to do this on EC2

    Read the article

  • Iptables: masquarading and routing

    - by nixnotwin
    I have a WAN router which is linked to isp over a /30 WAN subnet. But it also servers as a router to a /29 local public WAN subnet which is connected to few of my servers. The traffic from /29 gets routed to ISP via /30 subnet. For a wired reason I want to masqarade (NAT) the interface which has /30 ip. So the interface with /30 ip should appear as masquaraded for my 192.168.1.0/24 network and it also should act as a normal non-NAT router for my WAN public subnet /29. Can this be done with iptables on a Linux machine?

    Read the article

  • CPanel has two entries for site, need to use SSL one

    - by beingalex
    I have a website that is meant to be using SSL, however there are two entries in Cpanel's httpd.conf which seem to be causing an issue. When I visit just www.website.com I require it to go to https://www.website.com. However I have to write the https:// directly for the site to work. The secure site also has a different IP. I am not meant to edit the httpd.conf directly either and am unsure as to how to change the following directives: <VirtualHost 1.1.1.1:80> ServerName website.com ServerAlias www.website.com DocumentRoot /home/websitec/public_html ServerAdmin [email protected] ## User websitec # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup websitec websitec </IfModule> <IfModule !mod_disable_suexec.c> <IfModule !mod_ruid2.c> SuexecUserGroup websitec websitec </IfModule> </IfModule> <IfModule mod_ruid2.c> RUidGid websitec websitec </IfModule> CustomLog /usr/local/apache/domlogs/website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." CustomLog /usr/local/apache/domlogs/website.com combined ScriptAlias /cgi-bin/ /home/websitec/public_html/cgi-bin/ </VirtualHost> <VirtualHost 2.2.2.2:443> ServerName website.com ServerAlias www.website.com DocumentRoot /home/websitec/public_html ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/website.com combined CustomLog /usr/local/apache/domlogs/website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User websitec # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup websitec websitec </IfModule> <IfModule !mod_disable_suexec.c> <IfModule !mod_ruid2.c> SuexecUserGroup websitec websitec </IfModule> </IfModule> <IfModule mod_ruid2.c> RUidGid websitec websitec </IfModule> ScriptAlias /cgi-bin/ /home/websitec/public_html/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/www.website.com.crt SSLCertificateKeyFile /etc/ssl/private/www.website.com.key SSLCACertificateFile /etc/ssl/certs/www.website.com.cabundle CustomLog /usr/local/apache/domlogs/website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/websitec/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/ssl/2/websitec/website.com/*.conf" </VirtualHost> As you can see there is obviously the unsecure directive before the secure one. And this is probably the issue, however if I try to change the IP for the site in WHM I get an error saying that the IP (2.2.2.2) is already in use. Which it is I guess. Any help is appreciated.

    Read the article

  • Proxy Server suggestions

    - by Jon Menefee
    Here is the question I have that hopefully is not too general of a question. I have a network with approximately 25 PC's, 3 servers and 25 IP cameras. I have a firewall already on the network and it works fine for what I need, but my client is asking me if there is a way to put a Proxy server on the network to monitor where his employees are going when they surf the Internet. He is not wanting to block them (at least not thru the Proxy server), but he wants to make sure that they arent going to sites that would compromise the networked PCs. I have looked at TMG and it is a little more than what I want. I hesitate adding another firewall to the system because of the security cameras that are presently on the network (IP Cameras). I just want to put a policy in AD that would make certain Users (or Computers) use a Proxy server. Any suggestions on a good proxy server are welcome. Thank you

    Read the article

  • howt setup remote access into computer behind 2 routers?

    - by Steve Wasiura
    I can setup remote access to a pc behind a single router/firewall by using NAT and Port Forwarding, simples! But there is a customer that shares an internet connection with another office, and they are behind a second router firewall. I drawed a picture with my crayons but I can't attach it because I'm a new account on SF. see it here: http://i.imgur.com/b3FDx.png So how would I setup remote access to the pc that is beind the second firewall? It must be something about static routes, i.e. if I hit the wan ip on port 4905 I want it to forward it to 10.0.0.30 by going through 192.168.1.10 so a route statement like for all requests to 10.0.0.30, use 192.168.1.10 ? and ass u me router 2 has a static gateway ip of 192.168.1.10 and need a standard NAT on router 2 to point port 4905 to 10.0.0.30 is this the right way, any tips? both routers are netgear consumer equipment. thanks

    Read the article

  • How to set up a subdomain in nsd3

    - by qliq
    nsd3 is very little-known but super-lightweight and stable DNS server which makes it a great alternative to bind9 be used on low-end boxes. There is a very good tutorial here that describe how to set it up. My problem is that I need to set up a subdomain subd1.example.com that will be severed on another VPS. I tried to add subdmn1.mymaindomain.com. IN 1.2.3.5 (Assuming that my destination IP is 1.2.3.5) Then I nsdc rebuild service nsd3 restart However the subdmn1.mymaindomain.com fails to resolve to the IP. Any clues will be much appreciated.

    Read the article

  • Eliminate single point of failure for webservers?

    - by George Bailey
    I know in DNS, that each of the DNS servers will be tried to see if they will respond I know in email that in the event of a failure it will go to the next one in the list or it will hold the mail for a period of time As far as I know,, in webservers,, the browser will get one of the webserver IP addresses and try it and if it fails it will give up. Is this correct? If so,, then the only way to direct traffic away from a failed IP address would be with the DNS servers.. and even that would not update immediately?

    Read the article

  • How to link specific ports to specific domains with Apache virtual hosts?

    - by theJoe
    We have a forward-facing linux box running Apache HTTP server that is acting as a reverse proxy for several back-end servers. The servers are accessed through specific domain names and ports and are set up as virtual hosts within Apache as such: Listen 8001 Listen 8002 <Virtualhost *:8001> ServerName service.one.mycompany.com ProxyPass / http://internal.one.mycompany.com:8001/ ProxyPassReverse / http://internal.one.mycompany.com:8001/ RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </Virtualhost> <Virtualhost *:8002> ServerName service.two.mycompany.com ProxyPass / http://internal.two.mycompany.com:8002/ ProxyPassReverse / http://internal.two.mycompany.com:8002/ RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) RewriteRule .* - [F] </Virtualhost> The proxy server has only one IP address, and both domains are pointing to it. Accessing internal.one via service.one works fine, as does accessing internal.two via service.two. Now the problem is that Apache does not take the requesting domain into account when accessing the virtual hosts. What I mean is that both domains work for both ports: requests for service.one:8002 proxies to internal.two:8002, and requests for service.two:8001 proxies to internal.one:8001, where ideally both these requests should be denied. I can get around this by creating more virtual hosts that explicitly deny these requests: NameVirtualHost *:8001 NameVirtualHost *:8002 <Virtualhost *:8001> ServerName service.two.mycompany.com Redirect permanent / http://errorpage.mycompany.com/ </Virtualhost> <Virtualhost *:8002> ServerName service.one.mycompany.com Redirect permanent / http://errorpage.mycompany.com/ </Virtualhost> But this is not an ideal solution, since we plan to add more services to the proxy, and each new port would need to be explicitly denied on all the other domains, and each new domain would need to be explicitly denied on all ports it is not utilizing. As we add more services, the number of virtual hosts can get out of hand quickly. My question, then, is whether there is a better way? Can we explicitly tie specific ports to specific domains in a virtual host so that only that domain-port combination is processed, and all other combinations are not? Things I’ve tried: Adding NameVirtualHost *:8001, etc. without the additional virtual hosts. Setting ProxyRequests On and Off, as well as ProxyPreserveHost On and Off Adding the server name or IP address to the virtual host header, e.g. <VirtualHost service.one.mycompany.com:8001> Using the <proxy> directive inside the virtual host directive. Lots and lots of googling. The proxy server is running CentOS 6.2 64-bit, Apache HTTPD server 2.2.15. As mentioned, the proxy server has only one IP address, and all the domains we are using are pointing to it.

    Read the article

  • Cannot connect via OpenSSH and FTP to my ubuntu server

    - by budde
    Hello I have installed a webserver (ubuntu server 10.04) and it is connected to the internet. I can tell because the apache server apparently is working. But i can't get SSH or FTP to work. When I try to login from my laptop (SSH user@my-ip) ,SSH asks for my password, and when i give it, it does nothing! Also when I give the wrong password, it tells me that the password is incorrect. I'm also receiving an error while trying to connect by FTP. Sorry could not display all the contents of "/ on [my-ip]": DBus error

    Read the article

  • connecting to a network using route command

    - by ami
    I have a computer with an external IP(192.168.223.220) and also an internal address (10.1.1.20) in order to connect to some servers that don't have external addresses only 10.1.1.xx . in order to connect to these servers from other machines I used the following command "route ADD 10.1.1.0 MASK 255.255.255.0 192.168.223.220" and than I was able to connect to the servers using there 10.1.1.xx address. The problem is that the hard disk of main server(192.168.223.220) died and was replaced and after the that I am not able to connect to the servers as before, the route command succeeds and I can ping 10.1.1.20 but not the other servers. Thanks I am using Windows XP and the print outs are D:\AurosHome\Scriptsipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : N100-master Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 Physical Address. . . . . . . . . : 00-30-48-34-BA-B9 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.225.180 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.225.254 DNS Servers . . . . . . . . . . . : 192.168.225.2 Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration Physical Address. . . . . . . . . : 00-30-48-34-BA-B8 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.1.1.20 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Mellanox IPoIB Adapter Physical Address. . . . . . . . . : 00-02-C9-25-34-0D D:\AurosHome\Scriptsroute print Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 30 48 34 ba b9 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 - Packet Sche duler Miniport 0x3 ...00 30 48 34 ba b8 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Packet Schedul er Miniport 0x10005 ...00 02 c9 25 34 0d ...... Mellanox IPoIB Adapter - Packet Scheduler Miniport =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.225.254 192.168.225.180 10 10.1.1.0 255.255.255.0 10.1.1.20 10.1.1.20 10 10.1.1.20 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.225.0 255.255.255.0 192.168.225.180 192.168.225.180 10 192.168.225.180 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.225.255 255.255.255.255 192.168.225.180 192.168.225.180 10 224.0.0.0 240.0.0.0 10.1.1.20 10.1.1.20 10 224.0.0.0 240.0.0.0 192.168.225.180 192.168.225.180 10 255.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 1 255.255.255.255 255.255.255.255 10.1.1.20 10005 1 255.255.255.255 255.255.255.255 192.168.225.180 192.168.225.180 1 Default Gateway: 192.168.225.254 Persistent Routes: None

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • solaris + why cant ping to default getway

    - by yael
    I have Solaris machine with IP 10.10.10.100 and default getway 10.10.10.1 and subnet 255.255.255.0 remark - solaris machine connected to cisco switch via cross cable and from switch to my laptop I configure my laptop to connect to my Solaris machine so my laptop IP is 10.10.10.1 and subnet 255.255.255.0 but something not clearly I have ssh connection from my laptop to my Solaris machine ( I mean I in my solaris machine ) but from Solaris machine I can do ping to 10.10.10.1 ? ( how it can be ??? ) please advice why?

    Read the article

  • Why is Windows 7 not following all routes?

    - by GigabyteProductions
    My computer is connected to my secondary router that's running the 192.168.42.0/24 network and my computer also has a route that directs anything on that network to the router, but for anything on that network other than the router itself, it get's the ICMP response of Reply from 192.168.42.194: Destination host unreachable. (with 192.168.42.194 being my computer). Every other network works, like all of the internet, or addresses on my primary router like 192.168.1.*, just not on the 192.168.42.0/24 network... route print returns: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.42.1 192.168.42.194 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.42.0 255.255.255.0 On-link 192.168.42.194 276 192.168.42.194 255.255.255.255 On-link 192.168.42.194 276 192.168.42.255 255.255.255.255 On-link 192.168.42.194 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.42.194 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.42.194 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.42.1 Default =========================================================================== The only time anything is supposed to send an ICMP Host Unreachable response is when there's no route to it, right? So, why is my own computer sending that to ping or tracert when I have the route of 192.168.42.0 with the mask of 255.255.255.0? An IP address of 192.168.42.2 surely fits into that route. If I explicitly add a route for the IP address i am trying to access, it works, like: route add 192.168.42.2 mask 255.255.255.255 192.168.42.1 (the 192.168.42.1 right after mask is gateway, or the device to send the packet to so it can route it further), but why wont it work for the implicit route that's automatically on the table? I disabled my firewall, too (I use Comodo if anyone thinks this still serves as a problem). I'v even tried explicitly adding the gateway of 192.168.42.1 to the 192.168.42.0/24 route instead of it routing through 0.0.0.0's gateway, which is what On-link does. but that didn't work either, so it's not a gateway specification problem. If the host was really unreachable, it would be the router's IP address (192.168.42.1) sending that to me... This network is all of my creation, so there's no problem such as an administrator locking me out, because i am the administrator.

    Read the article

  • ubuntu server refusing connections via port forwarding

    - by Matt
    Getting some really weird behavior from our Ubuntu server... it's behind a Verizon router firewall with port forwarding (port 8080 to port 80 on the server), and we've been having issues accessing it via this external IP. From within the network, it appears to respond normally (I can access it via web browser and SSH), but refuses connections through port forwarding (using our static external IP). The strangest thing is that it actually responds to external port-forwarded connections right after being restarted, but quickly lapses back into this pattern of refusing external connections. I'm a bit of a server newbie (I'm actually a programmer in a small startup that just lost their server ops guy, urgh) so this is all trial by fire for me. Does anyone have any advice on what could be going wrong here? Any help would be appreciated, thanks.

    Read the article

  • Wireless Bridge -DHCP

    - by Usta
    I was thinking of picking up a couple of TP-Link wireless routers, and setting them to bridge. I have a sep. LAN network that would have one of them, and I'd put one on my internet connection. Would I be able to keep my current IP subnets? (255.255.255.0 and 255.0.0.0) or would I have to pull my IPs from the same IP range. (I want to keep my current DHCP servers in place) The reason I want a bridge is so that I can VPN into the internal network.

    Read the article

  • Cannot connect to FTP server from external host

    - by h3.
    I have a FTP server (vsftpd) setuped on a Linux box (Ubuntu server). When I try to connect with a computer on the same network everything works fine as expected. But as soon the IP is external it won't connect.. I first assumed the port was blocked, but then: localserver:$ sudo tail -f /var/log/vsftpd.log Wed Jan 13 14:21:17 2010 [pid 2407] CONNECT: Client "xxx.xxx.107.4" remotemachine:$ netcat svn-motion.no-ip.biz 21 220 FTP Server And it hangs there. Do any ports other than 21 need to be open?

    Read the article

  • Created a new zone in DNS manager - can't get site bindings to work in iis 7

    - by nick gowdy
    Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

    Read the article

  • Linux periodically "losing" ability to connect to server via SSH?

    - by gct
    I know this isn't exactly a programming question, but it popped up in my use of git for programming projects at least. I've got a web server that I use to host my git repos on, but my ubuntu box seems to "lose" the ability to connect to it via SSH. I'll get a "connection refused" error when I try to ssh or use git. Rebooting my local machine will fix the problem, but only temporarily. I can still connect to the web interface just fine, and the problem manifests with other servers as well. I've been working around it by pulling my changes over to my laptop and pushing from there, but that's sub-optimal as you can imagine. Has anyone seen something like this? I'd be tempted to say it's some kind of IP caching problem, but I can't connect even using the IP address of the server directly... Running Ubuntu 9.04

    Read the article

  • htaccess not found

    - by clarkk
    I have installed a Apache 2 (from webmin) server on Debian 6.. I have setup a virtual host db.domain.com on the server which works fine, but .htaccess doesn't work if you get access from the ip address and the directory is listed if no index.php is found? db.domain.com -> 403 forbidden xxx.xxx.xxx.xxx -> gets access to the server Why is .htaccess omitted when you get access from the servers ip address? httpd.conf <Directory *> Options -Indexes FollowSymLinks </Directory> <VirtualHost *:80> ServerName db.domain.com DocumentRoot /var/www </VirtualHost> htaccess order deny,allow deny from all

    Read the article

  • Allow connection to certain port from specified domain

    - by Scott
    I got two domains, which are pointing on the same IP address, I can use both to connect to the server or certain port (TeamSpeak), the problem is that I would like the only one domain from those two to be working while connecting to a certain port. Eg. example.com points at the 11.22.33.44 -- allow connection to the certain port from this domain. sample.com points at the 11.22.33.44 -- disallow connection to the port specified above from this domain. I know this would be possible for the IP addresses, but would it be possible for the domains?

    Read the article

  • I can connect to Samba server but cannot access shares.

    - by jlego
    I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

    Read the article

  • SSH Tunnel doesn't work in China

    - by Martin
    Last year I was working in China for a few months. I never bothered setting up a real VPN, but just created a SSH tunnel, and changed my browsers proxy settings to connect through it. Everything worked great (except flash of course) but that was fine. However, now I'm back in China but I'm having problems with this approach. I do the same thing as last time, and according to https://ipcheckit.com/ my IP address is indeed the IP of my (private) server in the US, and I'm logging in to my server using a fingerprint I created long before going to China so no MITM should be possible. Furthermore the certificate from ipcheckit.com is from GeoTrust - so everything should be OK However, I still can't access sites which are blocked in China. Any idea how this could be possible?

    Read the article

  • VPN Authentication Credentials (Local/Remote Identifiers) For Remote Access VPN

    - by thatidiotguy
    So I am trying to set up a remote access VPN using the free ShrewSoft vpn client: https://www.shrew.net/software I want to use a PSK as the authentication mechanism combined with XAuth so that a connection requires a valid username/pass combo. Under the authentication tab this particular VPN Client however is asking for a Local Identity and a Remote Identity. The options for Local Identity Type are: Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier The options for Remote Identity are: Any Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier My current thinking is that I can use the Fully Qualifed Domain Name provided by the remote firewall for the Remote Identity, but I do not know what it wants for local identity. Just to stress: I am not trying to set up a site to site VPN. Can anybody shed any light on what I am missing here? A screenshot can be provided if that would be helpful. The current error I am getting during the connection is: IKE Responder: Proposed IKE ID mismatch

    Read the article

  • OpenVPN Chaining

    - by noderunner
    I'm trying to set up an OpenVPN "chain", similar to what is described here. I have two separate networks, A and B. Each network has an OpenVPN server using a standard "road warrior" or "client/server" approach. A client can connect to either one for access to the hosts/services on that respective network. But server A and B are also connected to each other. The servers on each network have a "site-to-site" connection between the two. What I'm trying to accomplish, is the ability to connect to network A as a client, and then make connections with hosts on network B. I'm using tun/routing for all of the VPN connections. The "chain" looks something like this: [Client] --- [Server A] --- [Server A] --- [Server B] --- [Server B] --- [Host B] (tun0) (tun0) (tun1) (tun0) (eth0) (eth0) The whole idea is that server A should route traffic destined to network B through the "site-to-site" VPN set up on tun1 when a client from tun0 tries to connect. I did this simply by setting up two connection profiles on server A. One profile is a standard server config running on tun0, defining a virtual client network, IP address pool, pushing routes, etc. The other is a client connection to Server B running on tun1. With ip_forwarding enabled, I then simply added a "push route" to the clients advertising a route to network B. On server A, this seems to work when I look at tcpdump output. If I connect as a client, and then ping a host on network B, I can see the traffic getting passed from tun0 to tun1 on Server A: tcpdump -nSi tun1 icmp The weird thing is that I don't see Server B receiving that traffic through the tunnel. It's as if Server A is sending it through the site-to-site connection like it should, but server B is completely ignoring it. When I look for the traffic on Server B, it simply isn't there. A ping from Server A -- Host B works fine. But a ping from a client connected to Server A to host B does not. I'm wondering if Server B is ignoring the traffic because the source IP does not match the client IP pool that it hands out to clients? Does anyone know if I need to do something on Server B in order for it to see the traffic? This is a complicated problem to explain, so thanks if you stuck with me this far.

    Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >