Search Results

Search found 13119 results on 525 pages for 'tcp ip'.

Page 249/525 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

  • "destination host unreachable" while ping attempt between 2 pc on 1 network

    - by Roberto Sadfasdf
    I have 2 computers in my network ones ip address is 192.168.2.31(PC-A) and the others is 192.168.2.33(PC-B). When I'm trying to ping from PC-B to PC-A it says: Pinging 192.168.2.33 with 32 bytes of data: Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Ping statistics for 192.168.2.33: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) And when i'm trying the otherwise it tells me same message with ip address switched..They are both can connect to the Internet

    Read the article

  • Possible to load entries into hosts.deny from text file?

    - by Tar
    I have around 96 million IP addresses that I have collected and routinely validate to be VPN providers, proxies, etc. I want these blocked. Currently, I am including the list formatted like deny ip; in nginx and that works perfectly. I want to use this list on another server, but nginx isn't an option, and I don't trust apache to handle this without slowing down. Is there a way to load this list into hosts deny via some command like aclexec or something? Are there other alternatives like setting up a DNSBL or using hosts.deny in conjunction with one?

    Read the article

  • Citrix Xen VM's lose networking

    - by Ash
    My client has a XenServer 6.0.2 installation with 2 Window Server 2008 R2 virtual machines. Whenever the virtual machines are rebooted they lose their IP settings (IP address, subnet, gateway). Each time after a reboot I need to login to each VM via XenCenter and re-apply the required static IP settings. This causes issues with connected iSCSI drives within each VM - drives need to be reconnected after each reboot. For example, a network adapter has the following settings pre-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 IPv4 Address. . . . . . . . . . . : 10.101.0.101(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.101.0.10 DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Post-reboot: Description . . . . . . . . . . . : Citrix PV Ethernet Adapter #0 Physical Address. . . . . . . . . : C6-FB-A2-4F-2C-F3 Autoconfiguration IPv4 Address. . : 169.254.153.174(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 10.101.0.100 NetBIOS over Tcpip. . . . . . . . : Enabled Under XenCenter -- Virtual Network Interfaces, each adapter is set to a static MAC address (i.e. "Use this MAC address"). I have tried the following commands within one VM but this had no effect: netsh winsock reset catalog netsh int ip reset Can someone please help?

    Read the article

  • Why is my system using port 4?

    - by Kathleen
    I have Windows 7 and have noticed that my system is using port 4 to connect to a lot of different IP addresses. When it connects to them it is not for very long before it moves to another IP address. One night I sat and wrote down as many as I could and started checking whois to see where they were and they were from all over the world. I don't understand this. When I did a search on the net with this question. The only info I could come up with was, that port 4 is used by the US Army and a list of port assignments listed it as "unassigned". If anyone has any clues to what is going on... I would greatly appreciate any info I could get.

    Read the article

  • QNAP (469L) with Debian: can't connect to router

    - by agtoever
    I've been running my QNAP 469L with Debian (Wheezy deb7u3) for a few months. Yesterday I upgraded the memory to 4 GB. The system boots fine, but since the upgrade, I'm not able to connect the server to my router (a TP-Link WR941ND). My configuration: The router runs a DHCP server (192.168.67.100 and up), with a preconfigured ip address for the QNAP (192.168.67.10). The router is on 192.168.67.1. As said, Debian is installed on the QNAP (which can be regarded as a normal computer). Networking hardware on the QNAP: Intel PRO/1000 Network Connection using the e1000e kernel module. This is what I have tried so far: Replace the network cable (tried 3 different cables on different router ports). Check for messages from the kernel: dmesg | grep eth. Besides the normal hardware messages I get a ADDRCONF(NETDEV_UP): eth0: link is not ready for each call to ifup. Manually restart the network sudo server networking restart Check sudo ifconfig (eth0 is up, but no ip addresses). Check the /etc/network/interfaces which has (besides the loopback device) an allow-hotplug eth0 and iface eth0 inet dhcp, which is afaik the default Debian configuration. Since the server has two ethernet ports, I checked if I'm using the right port (checked the hardware address that ifconfig reports for eth0 is the same as the hardware address that is in the preconfigured ip address for the server in the router. Do a manual sudo ifdown eth0 && sudo ifup eth0 with no results (but an extra ADDRCONF(NETDEV_UP): eth0: link is not ready in the kernel log) Do a dhcp request dhclient -v eth0: for about a minute requests are send (according to the terminal) and at the end I get a No DHCPOFFERS received. No working leases in persistent database - sleeping.. Check the router system log if DHCP requests are received. I see them for some devices (my Mac, my iPhone) but not from the QNAP. The log entry looks like: DHCPS:Recv REQUEST from 84:85:06:07:75:6A and then a DHCPS:Send ACK to 192.168.67.101. There are no records from the QNAP's hardware address. So the two error messages that I do get are: ADDRCONF(NETDEV_UP): eth0: link is not ready for every ifup and No DHCPOFFERS received. No working leases in persistent database - sleeping. for every DHCP call.

    Read the article

  • dhcp client service won't start

    - by xyious
    I have a Laptop with 2 network interfaces and neither will get an IP address through dhcp. I found out that the dhcp client service didn't start. Upon manually starting it gives the error 2: File not found. I have checked that the files were there (both svchost and dhcpcore .dll), the local service account has read access to the system32 folder, the path in the registry is also correct and I can access the file. I have tried to netsh winsock reset and ip reset all. I have even added the local service account to the administrators group. sfc /scannow also came up clean. I have no idea what else I can try. Any suggestions are welcome. (side note it's a windows 7 32 bit, atheros wlan, deinstalled avira before any of the other troubleshooting)

    Read the article

  • Fully Qualified Domain name on Ubuntu Server

    - by Fazal
    I've setup a LAMP server on Ubuntu 10.04 (lucid) and have also installed Virtualmin. This is my first attempt at setting up a server of any sort. I set up one virtual host using Virtualmin and so far so good. Some odd things are happening though, such as when I type in my primary domain into a browser, I see the contents of the virtual server instead of what should be in the default directory. I'm going to use 123.345.789 and example.co.uk instead of my actual ip and domain name's if thats ok. I checked my hostname by using hostname -f and got production1 as my response The contents of my /etc/hosts file is (ip's and domain changed to something generic for this post): 127.0.0.1 localhost localhost.localdomain 123.456.789 production1.example.co.uk 123.456.789 production1 shouldn't my FQD be production1.example.co.uk? How can I go about changing this?, a simple step by step instruction would be great! thanks in advance.

    Read the article

  • Asterisk is hacking itself [duplicate]

    - by Shirker
    This question already has an answer here: How do I deal with a compromised server? 11 answers I've got some strange logs on my asterisk (and there a lot of extensions were tried): chan_sip.c: Failed to authenticate device 6006<sip:[email protected]>;tag=f106f3fe but IP XX.XX.XX.39 is its OWN IP! cat /etc/asterisk/* | grep 6006 returns nothing. asterisk -rv Asterisk 11.4.0 How its possible, that its hacks itself? And how could I trace, where it comes from?

    Read the article

  • Get OpenVPN clients names to resolve through dnsmasq

    - by Fake Name
    I have a PFSense box running as an OpenVPN server. There are several remote devices that connect through the VPN (as tap devices). The VPN stuff is working, I can access the remote hardware by looking up the IP assigned to each device on the PFSense router. What I'd like is to have it so I can resolve the remote hardware addresses via DNS while on the local network. Note that this is only local-network - remote-device (they're backup boxes). I don't need to have the remote devices resolve using the local DNS forwarding agent. I have the rest of the devices on the network that need to be accessible via DNS report their name during the DHCP process. However, the IP assignment for OpenVPN tap clients, while it is dynamic (which is why I need DNS), does not seem to use the local DHCP server. How can I have my openvpn server add information for it's clients to the dnsmask resolver? Is this setup even reasonable (I'm not familiar with openVPN at all)?

    Read the article

  • Is IPv6 multicast routable over the Internet?

    - by Absolom
    As I understand it, public IPv6 addresses allocated by the IANA will have the prefix 2000::/3. These ip addresses will be routable through the Internet. IPv6 multicast addresses on the other side are prefixed FF00::/8. So my understanding is that the ipv6 multicast addresses won't be routable through the internet. I am right? If so, is there any way to do one-to-many ip routing over the Internet in IPv6? Thanks!

    Read the article

  • Cisco 1760 T1 Setup

    - by Joseph
    My 1760 has a WIC1-T1 card in Slot 0 and the slot 0 "OK" light is lit. When the router boots it shows that it sees the T1 card. I would like to configure my T1. I received the following details from my ISP: * Removed IP's IP Version: IPv4 Router Interface: edge1.mia1 -- t1-2/1/0:2:13 -- Switch Port: Vlan: WAN Network: 4.59.?.?/30 Level3 Side: 4.59.?.? Customer Side: 4.59.?.? Cust. LAN IPs: 4.59.?.?/27 The problem is that it is not listed under interfaces. I am a noob with IOS, please let me know if you need more details. Thanks.

    Read the article

  • Why "scope link" ipv6 address can be pinged via interfaces which they are not active on

    - by olagu
    [root@2_01 ~]# /sbin/ip -6 addr show pubeth0 inet6 2001:1::6/64 scope global inet6 2001:1::1/64 scope global inet6 fe80::20c:29ff:fe69:f9e8/64 scope link [root@v2_01 ~]# /sbin/ip -6 addr show pubeth1 inet6 fe80::20c:29ff:fe69:f906/64 scope link [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth1 PING fe80::20c:29ff:fe69:f9e8%pubeth1(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.259 ms --- fe80::20c:29ff:fe69:f9e8%pubeth1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 286ms rtt min/avg/max/mdev = 0.259/0.259/0.259/0.000 ms [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth0 PING fe80::20c:29ff:fe69:f9e8%pubeth0(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.057 ms --- fe80::20c:29ff:fe69:f9e8%pubeth0 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 390ms rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms Why can I ping6 "fe80::20c:29ff:fe69:f9e8" via pubeth1?

    Read the article

  • Route a specific user's traffic via VPN but still allow local networking

    - by wbg
    So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

    Read the article

  • Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

    - by iyl
    I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

    Read the article

  • Page loading hangs and never times out (Apache)

    - by Lucas -luky- N.
    I have set up Apache2 on a guest Ubuntu 10.04 OS (virtualbox). I have created a "big" HTML file (4MB) with only plain text and when I access a page through my local IP address such as http://192.168.0.100 it successfully loads the entire page. However, when I try to access it through my public IP address the browser loads part of the page and then hangs forever on "loading". I can load a simple webpage though. I'm not sure whether it's an issue with my Apache configuration, Virtualbox, Router or Modem. Any clues? Tried enabling Debug and mod_status but didn't find any useful information.

    Read the article

  • Can't connect to server from certain machines

    - by Joel Coel
    On a small college campus we have a VLAN setup for the computer labs. These machines get assigned IP addresses in the 192.168.7.xxx range. In the server room, all of the server are on the default VLAN and assigned an IP address in the 10.1.1.xxx range. For the most part this works, but the lab machines are unable to connect to one of the servers. They can't even ping it. They can talk to other servers on the same switch as this server just fine. At first I thought it might be a vlan issue, but I changed the server port vlan to match other known-working ports with no effect. Any ideas?

    Read the article

  • Network connection via USB

    - by Fco
    Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

    Read the article

  • Turn on PC power remotely through the Internet?

    - by W.N.
    I use SVN for my work at home and office, but I usually forget to commit the changes before shutdown. Therefore, I wish I could turn on my home/office PC at office/home. I already have TeamViewer installed on both PCs, so it will be okay as soon as the power is turned on. I have read many articles about this, I found both my PC and office computers support Wake-on-LAN. However, I don't know much about other config. And I need to turn on my computers through the Internet, not on LAN. My office Internet connection has static IP, however, my home Internet connection has dynamic IP, it changes as soon as I reset the modem, but it is not a big problem, I rarely turn the Internet modem off. And I don't have privilege to config office Internet connection, but I have Administration privilege on both PCs. Please give me details steps to turn on my office PC from home, and turn on my home PC from office.

    Read the article

  • Manage a lot of open ssh sessions to servers with id's for hostname

    - by kimausloos
    Lately I'm working a lot with a few open ssh connections to multiple VPS servers. The hostnames of the servers all follow an ID approach and it's becoming very difficult to know on what machine I'm working with. I was wondering if there is a way to put a name I define somewhere as the title of the terminal. So I would, for example, associate IP 123.123.123.123 with webserver-stg. When opening the connection to the IP, webserver-stg would automaticaly be displayed as the name of the session. Of course I'm not able to change code on the VPS servers, so the solution should be client-side.

    Read the article

  • IIS7 - multiple ports for websites, some working, some not.

    - by glasnt
    I have multiple IIS7 websites hanging off 1 IP, using different ports. All three sites use Z.A.B.C:XX, where XX is {100, 200, 300} * There's no web.config settings not making :300 not work, the bindings are set ok. I can even change the ports so 200 becomes 300, but the original 300 still doesn't work. They are all shown by IP, so it's not DNS. There's no SSL setting differences between them. I can't see anything in metabase.xml that would make one behave differently to another. Are there any other settings in IIS7 that I might not be finding, that would fix the issue? * not the real values.

    Read the article

  • is using Hosts for resolving a sql-server more performant?

    - by Ice
    Hi, we have a legacy application which uses a access.mdb with hundreds of ODBC-connected tables on a sql-server. the access.mdb contains nothing else than these odbc-connections. Now we consider to use a virtual sql-servername for these odbc connections and resolve it in the local hosts-file with the ip-address of the real sql-server. Like this we can easy switch between a test-sql-database server and the the server for production in changing one single entry in the hosts. EVERYTHING works fine and now comes the question: Could it be that this is more performant because there is one single point on resolving the sql-server (name or ip-address)? Is there something like a network-cache / DNS-Cache? peace Ice

    Read the article

  • Connection closed by remote host followed by Connection refused

    - by Khosrow
    All of a sudden my ssh connection to server has been damaged. Here is what's happened: $ ssh -vvv -p <PORT> -l <USER> <HOST> OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /home/khosrow/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <HOST> [<IP>] port <PORT>. debug1: Connection established. debug1: identity file /home/khosrow/.ssh/identity type -1 debug1: identity file /home/khosrow/.ssh/id_rsa type -1 debug1: identity file /home/khosrow/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host I've recently updated the box with yum update and sshd got updated as well. I honestly don't know if this caused any damages or not. But it's prompted that /etc/ssh/sshd_config was stored as /etc/ssh/sshd_config.rpmnew which was quite normal. I've seen similar posts while googling, but almost all of them suggests that I should check /etc/hosts.allow and /etc/hosts.deny, which in my case, I can't. I can not connect to the box to see what's going on there. I rebooted the box, through web interface of server provider, and it even got worse. I'm now getting this: $ ssh -vvv -p <PORT> -l <USER> <HOST> OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /home/khosrow/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <HOST> [<IP>] <PORT>. debug1: connect to address <IP> port <PORT>: Connection refused ssh: connect to host <HOST> port <PORT>: Connection refused with both <CUSTOM_PORT> and default 22 ports. I would really appreciate if anyone could help me on this.

    Read the article

  • macports apache,php,db, how do I test on another device?

    - by brokenindexfinger
    My supervisor suggests using macports to install/manage different versions of apache and php, as well as both mysql and posgres databases. The idea is that we need to test our platform on different versions of each. So far I've just been using the default apache installation on osx lion, and the default postgres installation. My question is this: once I turn Web Sharing off, and proceed with a custom apache2 setup based in /opt/local/, how do I broadcast my machine's IP to other devices, for testing? With Web Sharing, I can get my machine's IP and use that to test with an iPad and iPhone. Will that still be the case, and if so, how do I do it?

    Read the article

  • Access to a network server without port forwarding

    - by SdevDavid
    I have a network with the following structure. The server in PC2 is simple socket server TCP in 8080 port. I need to access to PC2 from other external network by socket client. This socket client knows the public IP (85.xxx.xxx.x), the private IP (192.168.0.21) and the port. How I can access PC2 without port forwarding on the router? If possible, I would like to have a reference in any programming language of this case.

    Read the article

  • How to forward traffic using iptables rules?

    - by ProbablePattern
    I am new to iptables and I have been doing Google searches for a few days now without finding a good solution to this problem. I have computer A with a public ip address (say 192.0.2.1) that can access the Internet unrestricted. I have another computer B with a private ip address (192.168.1.1) that can only access computer A. How do I use iptables to forward network traffic from B through A to the Internet? I need to use http, ftp, and https in order to use apt-get with sudo. Both computers run Ubuntu linux. I have tried using Squid but I think it is far too complicated for what I need to do.

    Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >