Search Results

Search found 22301 results on 893 pages for 'software sources'.

Page 25/893 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • Best software for taking math notes at lectures

    - by data_jepp
    Let me first just say that I know about La-Tex, and that doesn't fast enough. I use it for papers, but for "real-time" note taking it's just to heavy. I'm talking two math classes this semester. Linear algebra and discrete math, I just got a laptop with 10 hour battery life which makes me want to take notes on it!!! Openoffice with formula thingy is what I use now. Now I have to pay attention lol. Thanks.

    Read the article

  • Linux boot on a raid1 software raid ?

    - by azera
    Hello I am trying to convert my single disk boot to a raid1 boot So far here is what i have: I sucessfully create the raid 1 as degraded with the new drive alone, I copied all the data on it I can mount that raid 1, see its files etc I already have a raid5 that is working on the same box (although not booting on it) I have installed grub on both drive When grub boot, it loads the kernel alright, but during the kernel boot it fails to load the "root block device" The kernel tells me : 1 - detected that root device is an md device 2 - determining root devices 3 - mounting root 4 - mounting /dev/md125 on /newroot failed: input/output error. Please enter another root device: ... At this point, if I enter /dev/sda3 (my "old" root device that isn't converted to raid yet) everything boots fine without the root. The /dev/md125 device is indeed created but it seems to be created after the error happens, as in it creates it after loading the device, when mdadm is loaded. Somehow it looks like it can't/doesn't load the raid array before it needs to mount it, and I don't know how I can solve that. My config files (taken from the system once it boots with sda3 as root device): $ cat /etc/mdadm.conf ARRAY /dev/md/md0-r5 metadata=0.90 UUID=1a118934:c831bdb3:64188b84:66721085 ARRAY /dev/md125 metadata=0.90 UUID=48ec4190:a80d4dde:64188b84:66721085 $ cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] [raid0] [raid10] md125 : active raid1 sdc3[1] 477853312 blocks [2/1] [_U] md127 : active raid5 sdd[0] sdf[3] sdb[2] sde[1] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] unused devices: <none> $ cat /boot/grub/menu.lst default 0 timeout 8 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title Gentoo Linux 2.6.31-r10 root (hd0,0) #kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/ram0 real_root=/dev/sda3 kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/md125 md=125,/dev/sdc3,/dev/sda3 initrd /boot/initramfs-genkernel-x86_64-2.6.31-gentoo-r10 # blkid /dev/sda1: UUID="89fee223-b845-4e0a-8a0b-e6cf695d5bcf" TYPE="ext2" /dev/sda2: UUID="a72296a8-d7d4-447f-a34b-ee920fd1a767" TYPE="swap" /dev/sda3: UUID="97eb0a6a-c385-4a9d-bf74-c0bab1fa4dc1" TYPE="ext3" /dev/sdb: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc1: UUID="d36537fd-19a0-b8a3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdd: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sde: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/md127: UUID="13a41589-4cf1-4c04-91ca-37484182c783" TYPE="ext4" /dev/sdf: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc2: UUID="a1916397-1b48-45d7-9f98-73aa521e882f" TYPE="swap" /dev/sdc3: UUID="48ec4190-a80d-4dde-6418-8b8466721085" TYPE="linux_raid_member" /dev/md125: UUID="c947ed64-1d4d-4d1d-b4d2-24669fff916e" SEC_TYPE="ext2" TYPE="ext3" # mdadm -E mdadm: No devices to examine # fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 83 Linux /dev/sda2 6 1311 10490445 82 Linux swap / Solaris /dev/sda3 1312 60801 477853425 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sdc1 1 5 40131 83 Linux /dev/sdc2 6 1311 10490445 82 Linux swap / Solaris /dev/sdc3 1312 60801 477853425 83 Linux Disk /dev/md125: 489.3 GB, 489321791488 bytes 2 heads, 4 sectors/track, 119463328 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0x00000000 Disk /dev/md125 doesn't contain a valid partition table

    Read the article

  • Linux software raid robustness

    - by Waxhead
    I have a 4 disk 5TB raid5 setup where a disk is showing signs of going down the drain. It is reporting media errors and from dmesg I can see that several read errors are corrected. smartctl does report "notifications" but no panic so far. Since new disks are rather expensive at the moment I am starting to pondering exactly how robust the linux md layer is. I would appreciate if someone could shed some light on how md actually deals with disk errors. For example how does md deal with write and read errors - what does it (really) take for disk to be rejected from an array. I also read that recently md got support for mapping out bad blocks. Does this mean that the read errors I've had would have been mapped out if I where running kernel 3.1 or would md still try to "work on them" to make them usable.

    Read the article

  • Recommend software: File checksum calculator

    - by Johnny W
    Hi, I'm looking for a light, fast hash/checksum calculator (eg. MD5, SHA1, etc.). I've been using HashCalc and it works fine enough, but I was wondering if there was something better. When downloading .ISOs from MS BizSpark, I've found that it's essential to check the SHA1, and I'm sure that other people have found the same... So what's the defacto, light, fast, simple app that does the job? :) Thanks for any recommendations.

    Read the article

  • Is there a vmware appliance for software development?

    - by Ali Shafai
    I use Assembla.com and it does everything I need, SVN, bug tracking, ticketing... the only thing I don't like is that the server is not mine, I'm putting all my company property on a server in the coulds. I was wondering if there is an virtual machine to download and put on my server to serve all Assembla does?

    Read the article

  • Looking for application performance tracking software

    - by JavaRocky
    I have multiple java-based applications which produce statistics on how long method calls take. Right now the information is being written into a log file and I analyse performance that way. However with multiple apps and more monitoring requirements this is being becoming a bit overwhelming. I am looking for an application which will collect stats and graph them so I can analyse performance and be aware of performance degradation. I have looked at Solarwinds Application Performance Monitoring, however this polls periodically to gather information. My applications are totally event based and we would like to graph and track this accordingly. I almost started hacking together some scripts to produce Google Charts but surely there are applications which do this already. Suggestions?

    Read the article

  • external drive enclosure -> software RAID 5?

    - by memilanuk
    Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

    Read the article

  • Project management, timesheet and planning software

    - by hfidgen
    Hiya, I'm trying to find an integrated PM solution which will give my business all of the following: Timesheeting so we can track time spent on tasks Holiday planner (integrated with timesheet and project management Project management tool, integrating the above, with milestones, gantt chart, dependancies etc. Forecasting ability (nice to have, but not a requirement) Reporting capability - especially time spent on projects, costs etc. Now yeah, that's quite a lot of functionality, I appreciate that! But currently we've got 3 systems, none of which really talk to each other and it's a right headache. So far we've looked at: OpenWorkbench - not enough features Basecamp - not enough features and too reliant on online MS Project - too expensive? Can anyone throw some other hats into the ring which maybe I've not heard about? Really interested to hear how other people have approached this, it's not an unusual business requirement! Thanks!

    Read the article

  • Best defragmentation software?

    - by dentrasi
    I'm currently running Defraggler on my system, as it's fast, seems to be effective, and has a nice clean interface; it's also the program the other techs recommend to me. I've also heard good things about JKDefrag. Which program do you find you get the best results with?

    Read the article

  • 2 drives, slow software RAID1 (md)

    - by bart613
    Hello, I've got a server from hetzner.de (EQ4) with 2* SAMSUNG HD753LJ drives (750G 32MB cache). OS is CentOS 5 (x86_64). Drives are combined together into two RAID1 partitions: /dev/md0 which is 512MB big and has only /boot partitions /dev/md1 which is over 700GB big and is one big LVM which hosts other partitions Now, I've been running some benchmarks and it seems like even though exactly the same drives, speed differs a bit on each of them. # hdparm -tT /dev/sda /dev/sda: Timing cached reads: 25612 MB in 1.99 seconds = 12860.70 MB/sec Timing buffered disk reads: 352 MB in 3.01 seconds = 116.80 MB/sec # hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 25524 MB in 1.99 seconds = 12815.99 MB/sec Timing buffered disk reads: 342 MB in 3.01 seconds = 113.64 MB/sec Also, when I run eg. pgbench which is stressing IO quite heavily, I can see following from iostat output: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sdb 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 md1 0.00 0.00 0.00 529.60 0.00 9692.80 18.30 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.60 0.00 4.80 8.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 529.00 0.00 9688.00 18.31 24.51 49.91 1.81 95.92 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sdb 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 md1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 30.19 56.92 2.05 99.04 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sdb 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 md1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 28.77 62.15 1.96 99.00 And this is completely getting me confused. How come two exactly the same specced drives have such a difference in write speed (see util%)? I haven't really paid attention to those speeds before, so perhaps that something normal -- if someone could confirm I would be really grateful. Otherwise, if someone have seen such behavior again or knows what is causing such behavior I would really appreciate answer. I'll also add that both "smartctl -a" and "hdparm -I" output are exactly the same and are not indicating any hardware problems. The slower drive was changed already two times (to new ones). Also I asked to change the drives with places, and then sda were slower and sdb quicker (so the slow one was the same drive). SATA cables were changed two times already.

    Read the article

  • Software to capture 3d geometry?

    - by user712092
    Programs I found I found these programs to capture OpenGL 3D scene : 3D Ripper, OpenGL and D3D geometry capture, there are some solved problems with 3D Ripper GLIntercept captures OpenGL function calls OpenGL Extractor captures 3d geometry; should work as plugin for GLIntercept another tool to capture OpenGL 3D data EDIT: There is also HijackGL which changes how a scene is rendered so it probably can be used to capture geometry; it is backed up by a academic paper; it is just just a nice program, not related to what I want i think (or it would might be hard to change it to be for what I want, because it would require programming). 3D Ripper captures geometry, textures and shaders. OpenGL Extractor captures just geometry ... General questions about such programs What is Your experience with these programs? Which of these programs would You recommmend? Do You know other such programs? Were there any problems with them, or are there problems with them in general? Are there programs which work best overall, or is it specific to certain 3d applications? What I need to do? I am looking to program which can capture 3d geometry for study purposes. And also for a program to capture 3D animation (frames of 3d animation). I tried only 3D Ripper because application I try to capture data from is on Direct 3D. 3D Ripper works with at least Direct 3D 9, this application has Direct 3D 6. Are there applications which work with older version of Direct 3D? Thank You very much. :) (I was verbose in link names because I want them to be indexed better by search engines.)

    Read the article

  • Best/Preferred software for photography.

    - by chills42
    I am just getting into photography as a hobby, and am looking for some good tools for image uploading/browsing/editing. I am currently using the Canon EOS utility that came with the camera for uploading, Picasa for browsing, and GIMP for editing. Pros: The files are stored using the standard file system (no proprietary library like iPhoto) Great photo editing possibilities Free (except the Canon Utility, but that was bundled) Cons: Multiple programs Hard to view the Exif Data (I like the way that iPhoto displays the data) Over-simplified editing tools in Picasa What other tools should I look into? Also, I occasionally shoot in RAW, and would prefer Mac support (better monitor), but I also have windows and linux machines.

    Read the article

  • Best way to grow Linux software RAID 1 to RAID 10

    - by Hans Malherbe
    mdadm does not seem to support growing an array from level 1 to level 10. I have two disks in RAID 1. I want to add two new disks and convert the array to a four disk RAID 10 array. My current strategy: Make good backup. Create a degraded 4 disk RAID 10 array with two missing disks. rsync the RAID 1 array with the RAID 10 array. fail and remove one disk from the RAID 1 array. Add the available disk to the RAID 10 array and wait for resynch to complete. Destroy the RAID 1 array and add the last disk to the RAID 10 array. The problem is the lack of redundancy at step 5. Is there a better way?

    Read the article

  • Best way to grow Linux software RAID 1 to RAID 10

    - by Hans Malherbe
    mdadm does not seem to support growing an array from level 1 to level 10. I have two disks in RAID 1. I want to add two new disks and convert the array to a four disk RAID 10 array. My current strategy: Make good backup. Create a degraded 4 disk RAID 10 array with two missing disks. rsync the RAID 1 array with the RAID 10 array. fail and remove one disk from the RAID 1 array. Add the available disk to the RAID 10 array and wait for resynch to complete. Destroy the RAID 1 array and add the last disk to the RAID 10 array. The problem is the lack of redundancy at step 5. Is there a better way?

    Read the article

  • mdadm software RAID doesn't load at boot

    - by martinald
    Hi there, I'm using mdadm to create a raid1 mirror across two disks. I can create my /dev/md5 array perfectly using the tools, but it does not automatically reload my /dev/md5 when I restart, I need to manually recreate the array. Am I missing something obvious here?

    Read the article

  • FTP Synchronization software for Mac or PC

    - by evanmcd
    Hi, I've been using FTP Synchronizer for awhile and generally have had pretty good results with it. But, I've just moved to a Mac full-time (at work as well as home now) so want to get a native client if I can. I've tried the only one that I've found - SuperFlexibleSynchronizer - but it crashed every time I loaded up an FTP to FTP synch attempt. The most important features to me are: 1) ability to synch with a large number of files (thousands), as I generally work on sites with large number of files. 2) FTP to FTP synch. This would be very helpful as I work with some CMS based sites for which users upload files while on staging and don't want to move files locally first before moving live. Thanks! Evan

    Read the article

  • Paint Shop Pro-like open-source software?

    - by overtherainbow
    I need to add shapes that have been available in Paint Shop Pro since version 7 like curved arrows, etc. I gave Paint.Net and IrfanView a try, but they don't seem to support more sophisticated shapes than straight lines, circles, or rectangles. If this is correct, does someone know of a PSP-equivalent open-source solution for Windows? Thank you.

    Read the article

  • Designing a software based load balancer

    - by Kishore pandey
    Hello to all Server fault users, I am new to this website but have constantly been using the mother website, stackover flow. Well to begin with, i would like to design a load balancer for the organization i am working for. As i am very new to this whole, idea about load balancing and networks. I am finding it very difficult to start my project. I did a lot of research on already existing load balancer and found some(HAPROXY,NGINX) that could solve my problems, but the point is, I am still in a dilemma if they could answer the following requirements of mine: The client and server in my architecture are distributed. The load balancer should take care of the firewall. LB server should balance the load among all servers present in WWW cloud. The LB server should have some sort of configuration file, with the help of which it is possible to configure the servers. Heart beat: With the help of which it would be possible to check if any server is down, if any server is down the request should be passed to some other server. Various load balancing algorithms of the incoming requests. Easy error handling. It should be fairly possible to prioritize the incoming requests. Is there any already available load balncer solution on the market that could satisfy these requirements? If not is there any base code available with the help of which i could develop my own load balncer. If not where should i start from scratch? I am practically new to everything. Any help from a load balancer expert is very much appreciated. Thanx a ton in advance. Cheers and regards. Kishore

    Read the article

  • Text expansion software for Windows

    - by MagicAndi
    I am interested in using a text expansion application, such as Texter or Phase Express. Does anyone have any recommendations for the best text expansion application to use? I work on a number of Windows PCs (XP, Vista, Windows Server 2003 and Windows Server 2008); the application would need to work on all of these OS flavours. I am particularly interested in an application that is available for all of my programs, and that isn't program specific.

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >