Search Results

Search found 10161 results on 407 pages for 'dual boot'.

Page 250/407 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• Which part of the computer needs all the power from the PSU?

  - by Xeoncross

  A couple years ago I was building a new Core 2 Quad system and after reading all the reviews was convinced that I would need at least a 400 watt power supply unit (PSU). I bought a 500W Antec EarthWatts However, last year I bought a Kill-A-Watt power meter to test some things around our house and found that my PC was only using 80W of power while idle! (C2Q, 4GB RAM, SATA HD, & DVD burner) Well, here I am building another computer with a 65watt Core 2 CPU in it and I'm wondering if I can skimp out this time and get a 300watt or so unit since my usage doesn't seem to be what everyone claims it is. I'm sure that the people in the reviews who exhausted 500watt PSU weren't lying - so what is it that uses all that? The high-end dual SLI video cards? Lots of SATA drives? Overclocking?

  Read the article

• Move smaller hard drive to partition on a larger hard drive

  - by bluejeansummer

  My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu. I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot. Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority. In case it helps, both drives use 2.5" PATA, and I have a 1 TB external drive available if it's needed.

  Read the article

• Help to set up RAID on a DELL Poweredge 400SC

  - by Jim

  I have a FastTrak S150 TX2 raid controller that I have downloaded the driver for. I am installing WinXP fresh but don't have a floppy disk. Is there another way to load these drivers on boot? Anyone? Anyone at all...

  Read the article

• Toshiba Satellite L655D-S5050 Processor Upgrade

  - by C-dizzle

  I have been searching for hours to see what kind of upgrade I can do with my processor. I just ordered replacement memory so I can go to 8GB instead of 3GB and now want to see what is available for my CPU. Currently this is what is on my laptop: (in case some of you don't know what comes with this model) Windows 7 Home Pro - 64 Bit AMD M880G Chipset AMD Athlon II Dual Core P320 - 2.1 GHz, 1MB L2 Cache The memory I ordered was Crucial 2 x 4GB DDR3 1333 PC3-10600 I'm sure someone out there can help me, because google hasn't been to friendly with me today.

  Read the article

• How can I get Snow Leopard to recognize my third partition?

  - by qntmfred

  I installed Snow Leopard on my Macbook Pro. I then installed Windows 7 in a Boot Camp partition. Then using Windows 7's disk management console, I resized my Windows 7partition and created a 3rd NTFS partition for data, intending for both Windows 7 and Snow Leopard to read/write this partition. I installed MacFuse and NTFS-3G in Snow Leopard, but Snow Leopard still shows I have a single Windows 7 partition. How can I get Snow Leopard to recognize my third partition?

  Read the article

• Windows 8.1 install error 0x80070002

  - by cmoibenlepro

  I tried to install Windows 8.1 from the Windows Store and got the error 0x80070002. It seems that this error means that the download was not completed. I tried to restart the installation, I tried to clear the windows store cache, I tried to delete every thing in the C:\Windows\SoftwareDistribution\Download folder, I tried to do a clean boot. It always fails with the same error. As a workaround, is there a way to download windows 8.1 from somewhere else than the windows store?

  Read the article

• Textmate quick one

  - by Pickledegg

  I know its not strictly programming related, but the textmate mailing list is too 1990 for me to use properly. I won't make a habit of this: Anyone seen this popup before, it happens everytime I boot my mac. If so how do I kill it? Thanks.

  Read the article

• Core i5 Turboboost/C states Freezing computer

  - by Aaron Smith

  I'm not sure which, but I just had a heck of a time getting my computer to boot up and not freeze. It would run until it finished booting windows, then everything would freeze. This happened until I turned off turboboost and all the c states on the processor. What could be causing this? Is the processor going bad?

  Read the article

• Load Average runaway

  - by mewrei

  Is there any way to chase down lockups and runaway load averages? Every so often (pretty randomly) I'll get my load average spike up over 5 usually to around 10-15 and sometimes as high as 75 (dual core machine), and cause my system to lock for an indeterminate amount of time. The only thing I can possibly chase it to is using nVidia fakeraid (RAID-1) with JFS on top of that for my /home partition. Also I noticed that when my load averages spike, the power management system doesn't step up my processor speed from 1.6 to its maximum 2.13Ghz clock speed (not sure if this makes a huge difference with this problem). Any ideas?

  Read the article

• Unusual Restart

  - by Nikit Batale

  I am currently running Windows XP Professional on my computer. My configuration is Intel Dual Core 3.00 GHz, 512 MB RAM, 160 GB HDD. Sometimes, the computer just restarts without any particular reason. After restarting, I get an error report, "Windows has just recovered from a serious error." Such incidents happen once in 5-6 days. I don't face any other problems apart from this. Also, I don't face this problem in Ubuntu Karmic Koala though.

  Read the article

• Autossh dies after time

  - by Justin

  My setup is Ubuntu 10.04 on AWS Autossh to create a tunnel for MySQL The tunnel is automatically created using Upstart (/etc/init/autossh.conf): respawn console none start on (local-filesystems and net-device-up IFACE=eth0) stop on [!12345] script #user/IP Address redacted exec autossh -M 20000 -o StrictHostKeyChecking=no -L 3306:127.0.0.1:3306 [email protected] end script On boot the tunnel is created, works great. After some random idle time it dies. Any thoughts on how to keep it alive? I don't know what's killing autossh.

  Read the article

• Mixing different generations of ATi video cards

  - by middaparka

  I'm heading in the direction of a three monitor set up and hence suspect I need to go the dual video card route. At the moment, I've a Radeon X1900GT driving two 19" monitors which I'd like to keep and augment with something like a Radeon 5570 which would drive a 22" display. As such, I'm just wondering how Catalyst will cope with this configuration and whether there are any other issues that I'm likely to encounter. In terms of the obvious, my motherboard has two PCI-E slots and my power supply has two video card power connectors, so I'm hopefully covered from that side of things. Thanks in advance.

  Read the article

• Attach radeon driver to specific PCI devices?

  - by genpfault

  I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

  Read the article

• 3 Monitors powered from a Nvidia fx580

  - by user26067

  I have a NVidia FX580 card in a Dell Precision T1500. The outputs of the back of the card are DVI and 2x displayport. I tried to run 3 screens from the DVI + 2x displayport to dvi adaptors, but the card won't have it... It'll only run 2 of these screens at the same time. http://www.nvidia.com/object/product_quadro_fx_580_us.html says; **Display Support:** Dual Link DVI-I 1 DisplayPort 2 # of Digital Outputs 3 ( 2 out of 3 active at a time ) # of Analog Outputs 1 To me this reads that it will be able to power 2xdvi monitors and 1xvga monitor. Anyone care to confirm or speculate?

  Read the article

• Windows installer constantly asking for Word CD

  - by Dennis

  My daughter uses Word and at some point in the past tried to install a feature which needed the install CD. She no longer has the CD, figured she could live without the feature and cancelled the install. However, every time she boots the computer it tries to resume the install and asks for the CD. All you have to do is hit cancel but it seems a bit annoying to me to have to do that each time you boot. How can I get it to permanently abort the install?

  Read the article

• Dell OpenManage Causing Periodic Slowness

  - by Zorlack

  Today we diagnosed the cause of a Periodic slowness issue: see here. Dell OpenManage Server Administrator seems to have been causing hourly slowness. It would occasionally peg one of the CPUs for upwards of two minutes. Disabling it drastically improved the performance of the SQL Server. The server hardware: Dell R710 Dual Quad Core 2.9GHz Processors 96GB Memory 2 Disk RAID 1 SAS System Disk (Internal) 4 Disk RAID 10 SAS Log Disk (Internal) 14 Disk RAID 10 SAS Data Disk (External DAS MD1000) Windows 2008 Enterprise R2 x64 We installed the OS using Dell OpenManage Server Assistant, so I assume that it was correctly configured. For now we have disabled OMSA to alleviate the performance issues it was causing, but I'd like to be able to re-enable it. Has anyone had a similar experience that can shed a little light on the nature of this problem?

  Read the article

• Chrome OS instead of Splashtop OS

  - by blsub6

  I have an HP Mini 110 with Splashtop OS as an 'instant on' OS. I've updated to the newest version which has a Chromium browser...and not too much else You know what would be really cool? The newest Chromium/Chrome OS build on there instead Can someone in the know tel me if this is even possible? (just to be clear, I don't want to put Chrome OS on my hard drive or boot to a USB drive. I want Chrome OS installed in the same place that Splashtop is installed.)

  Read the article

• Is my PC Good enough [closed]

  - by Moinak Nath

  I'm getting a new laptop this Christmas and I was wondering if it's good enough for what I do. I'll be playing games like Need for Speed: Most Wanted (2012) and other NFS games. Also silent hunter and flight sim. I also browse the internet download stuff like, watch movies occasionally type documents with word, edit videos, and transfer files. To be more specific is the hdd big enough? is the ram big enough? Is the graphics card good? is the cpu speed enough, and is Windows windows 8 good for all these things. i also video chat so these are the specs 2.2 Ghz Intel Pentium B960 Dual Core 4 GB RAM 320 GB HDD Intel HD Graphics 720p Webcam 4 USB Ports (2 USB 3.0 @ 2 USB 2.0) HDMI Port It Is a Lenovo IdeaPad This is the one im Looking at http://www.bestbuy.com/site/Lenovo+-+IdeaPad+15.6%26%2334%3B+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Black/6851264.p?id=1218809260330&skuId=6851264#tab=specifications

  Read the article

• MacBook hangs when restarting to Vista through BootCamp

  - by John

  I have Vista Pro installed on my Macbook and while it mostly works well, sometimes when I select Windows from the boot screen after turning the thing on, the screen just goes black and it all stops. If I hold the power button until it powers down and repeat, it works. It's not getting as far as Windows at all, I think, because if Windows was previously shut down to Hibernate, it still restores fine... and I'm pretty sure if Windows' startup had hung and been force-rebooted my session would be borked?

  Read the article

• VMware Workstation reboot 32-bit host when starting 32/64-bit guest using VT-x

  - by Powerman

  I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas? Update 1: I've tried to boot vt.iso provided at http://communities.vmware.com/docs/DOC-8978 and here is it report: CPU 0: VT is enabled on this core CPU 1: VT is enabled on this core Update 2: I've just tried to boot 32-bit guests (Windows7, Ubuntu9.04 and Gentoo) using all possible virtualization modes. In Automatic, Automatic with Replay, Binary translation everything works, in Intel VT-x/EPT or AMD-V/RVI I got message "This host does not support EPT. Using software virtualization with a software MMU." and everything works. BUT in Intel VT-x or AMD-V mode all 32-bit guests reset host just like 64-bit guests! So, this issue is not specific to 64-bit guests. One more thing. Using Intel VT-x or AMD-V mode for both 32/64-bit guests my host reset right after starting VM, i.e. before VM BIOS POST and before guest even start booting. But using Intel VT-x/EPT or AMD-V/RVI VM BIOS runs ok, then 64-bit guests start booting (Windows7 completed "Loading files" progressbar), and only after that host reset.

  Read the article

• Monitoring physical RAM errors on Linux

  - by user40157

  I would like to monitor the ram of two linux systems (Ubuntu and Red Hat). I realize I can run memtest86 from boot to diagnose bad ram. But are there are any solutions to monitor ram while the system is still running. I'm sort of thinking a daemon that writes and reads back from random unused memory. Anybody seen something like this before?

  Read the article

• Task Sequence boots to logon screen instead of task sequence mode

  - by Ben M.

  I'm running a task sequence, and so that users don't accidentally interfere, I have the task sequence reboot to currently installed operating system, which as I understand, is supposed to boot to a sort of single user mode and all that shows is task sequence progress. However, this does not happen, it boots up like normal and comes to the logon screen and the task sequence runs in background. How can I adjust this behavior to the desired result?

  Read the article

• samsung NP530 laptop cannot enter bios setup

  - by Tony

  Hi my friend has a samsung NP530U3C and he has changed the bios to CSM only now it stuck on a loop and will not boot up, the options "F2 setup" "F4 recovery" are there but they do nothing.I have a bootable USB with win 8 that "installs" right up to restart then....back to the loop or in stall.Please can some one help its been driving me mad i just need to get tothe bios and change it back to EFI/CSM. Thanks.

  Read the article

• Xenserver 5.5 doesn't see RAID volume

  - by Roy Chan

  Hi Gurus, I am trying to install Xenserver on a Dell precision 490 workstation. After booting into the install wizard and next-ed a few times, On the disk step, it only shows physical harddrive but not the RAID (RAID-10) volume that I set up on the Dell RAID. Is there a special option that I have to set on the boot? or do I need a special driver for this? Please Advise Thanks

  Read the article

• Synergy setup broke on upgrade

  - by CoatedMoose

  I had synergy setup working fine with version 1.3.7, however I got a new computer and decided to set it up as well. Because the setup I was working with was ubuntu (server - dual monitors) mac (client) and the new computer (replacing the mac) was windows, I ended up updating everything to 1.4.10. ______ ______ ______ | mac | ubu1 | ubu2 | |______|______|______| The problem is currently that dragging to the left of ubu1 causes the cursor on the mac to flicker briefly and then the cursor shows up at the bottom right corner of ubu2. Here is my .synergy.conf section: screens Andrews-Mac-Mini: ctrl = ctrl alt = meta super = alt Andrew-Ubuntu: end section: links Andrew-Ubuntu: left = Andrews-Mac-Mini Andrews-Mac-Mini: right = Andrew-Ubuntu end And the output from synergys -f NOTE: client "Andrews-Mac-Mini" has connected INFO: switch from "Andrew-Ubuntu" to "Andrews-Mac-Mini" at 1679,451 INFO: leaving screen INFO: screen "Andrew-Ubuntu" updated clipboard 0 INFO: screen "Andrew-Ubuntu" updated clipboard 1 INFO: switch from "Andrews-Mac-Mini" to "Andrew-Ubuntu" at 2398,833 INFO: entering screen

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >