Search Results

Search found 9486 results on 380 pages for 'core plot'.

Page 251/380 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

  • How to run multiple distros using lvm

    - by Mark
    I've seen quite a few posts around about running multiple distros but not sure they apply to using LVM (and without Windows). I'm using a machine that's about 3 years old. Setup: Intel Core i7 2.8GHz 8GB Ram 1TB SATA HDD At this point, I'd like to install 12.10 and Mint 14, leaving the option open to install additional distros down the road. I could be way off, but I'm thinking about creating at least 2 primary /boot partitions (1 for 12.10 and 1 for Mint) and another partition for LVM leaving room for additional /boot partitions. Then creating a VG and separate LVs for Ubuntu 12.10 and Linux Mint 14. I understand I can share partitions between the 2 installs, but I'm only using this for testing and I have tons of space to play with. LVM seemed logical considering I may want to install and test additional distros. I guess I could share the /swap partition across the board without problems, right? I'm unclear about GRUB2. How do I handle the bootloader situation? Install 12.10 and get it running then make changes to grub.cfg after installing Mint? And do I not install GRUB for Mint or do I install it in a different location? Any guidance would be appreciated.

    Read the article

  • My WiFi gets deauthenticated every few minutes or seconds (Reason: 7)

    - by dan
    My Wifi on my new Thinkpad W520 running Natty keeps dropping out and coming back on. Output from dmesg below. Any advice? [30493.687552] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [30493.689127] wlan0: authenticated [30493.689144] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [30493.693592] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [30493.693595] wlan0: associated [31631.172868] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31631.211847] cfg80211: All devices are disconnected, going to restore regulatory settings [31631.211868] cfg80211: Restoring regulatory settings [31631.211873] cfg80211: Calling CRDA to update world regulatory domain [31631.215037] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [31631.215042] cfg80211: World regulatory domain updated: [31631.215044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [31631.215046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215049] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215051] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215053] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215055] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31632.289638] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [31632.291262] wlan0: authenticated [31632.291276] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [31632.295119] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [31632.295123] wlan0: associated [31886.234836] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31886.306735] cfg80211: All devices are disconnected, going to restore regulatory settings [31886.306740] cfg80211: Restoring regulatory settings [31886.306744] cfg80211: Calling CRDA to update world regulatory domain

    Read the article

  • How do you convince the client their application's backend needs a rewrite?

    - by Richard DesLonde
    I have been supporting a LOB winforms application for a client the last 3 years. The application is built with a simple monolithic architecture and uses .NET 2.0. The application is a core part of their operations and its longevity is paramount. It needs to evolve with their evolving business processes, as well as implement improved functionality etc....this brings me to believe that this application needs an overhaul of sorts on the back-end. The problem is changing a back-end is "invisible"...i.e. the user never actually sees it. It's a quality of the system that is changing (stability, maintainability, reliability, longevity), not some functional requirement that will be easily seen...i.e. the ROI is not obvious. There is a lot of new functionality to be added to the front-end as well (user experience). I am considering a strategy of changing the back-end over time...i.e. when making a change or adding a feature to the front-end, change those components in the back-end that are affected, eventually you get to everything. How do I convince the client that we need to rebuild the back-end?

    Read the article

  • I created a program based on an LGPL project, and I'm not allowed to publish the source code

    - by Dave
    I thought LGPL was a permissive license, just like MIT, BSD or Apache. But today I read, that only linking to LGPL (libraries etc) is allowed from closed-source code - other than that, it's copyleft - so I have to publish code that is based on an LGPL program. I created a program for my employer that is based on an LGPL program, but has considerable modifications to it. Of course, I am not allowed to put that modified source code out there. At the same time, I have to, if I distribute it (right?). So I wonder whether there is a workaround to this, so I can keep this closed-source (I wish I could publish the source) - any suggestions? My idea: can I put most functions of the original LGPL app into an external library, write the core executable from scratch, but refer back to the library for all functions that I haven't modified? Currently, everything is in a .jar file (it's Java/Swing). if you think my idea is legally/technically feasible - how much effort would it be to seperate what I wrote and what the original is? I'm not the most java savvy.

    Read the article

  • Freescale One Box Unboxing (then installing Java SE Embedded technology)

    - by hinkmond
    So, I get a FedEx delivery the other day... "What cool device could be inside this FedEx Overnight Express Large Box?" I was wondering... Could it be a new Linux/ARM target device board, faster than a Raspberry Pi and better than a BeagleBone Black??? Why, yes! Yes, it was a Linux/ARM target device board, faster than anything around! It was a Freescale i.MX6 Sabre Smart Device Board (SDB)! Cool... Quad Core ARM Cortex A9 1GHz with 1GB of RAM. So, cool... I installed the Freescale One Box OpenWRT Linux image onto its SD card and booted it up into Linux. But, wait! One thing was missing... What was it? What could be missing? Why, it had no Java SE Embedded installed on it yet, of course! So, I went to the JDK 7u45 download link. Clicked on "Accept License Agreement", and clicked on "jdk-7u45-linux-arm-vfp-sflt.tar.gz", installed the bad boy, and all was good. Java SE Embedded 7u45 on a Freescale One Box. Nice... Hinkmond

    Read the article

  • How do I debug an overheating problem?

    - by Tab
    Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

    Read the article

  • New features in SQL Prompt 6.4

    - by Tom Crossman
    We’re pleased to announce a new beta version of SQL Prompt. We’ve been trying out a few new core technologies, and used them to add features and bug fixes suggested by users on the SQL Prompt forum and suggestions forum. You can download the SQL Prompt 6.4 beta here (zip file). Let us know what you think! New features Execute current statement In a query window, you can now execute the SQL statement under your cursor by pressing Shift + F5. For example, if you have a query containing two statements and your cursor is placed on the second statement: When you press Shift + F5, only the second statement is executed:   Insert semicolons You can now use SQL Prompt to automatically insert missing semicolons after each statement in a query. To insert semicolons, go to the SQL Prompt menu and click Insert Semicolons. Alternatively, hold Ctrl and press B then C. BEGIN…END block highlighting When you place your cursor over a BEGIN or END keyword, SQL Prompt now automatically highlights the matching keyword: Rename variables and aliases You can now use SQL Prompt to rename all occurrences of a variable or alias in a query. To rename a variable or alias, place your cursor over an instance of the variable or alias you want to rename and press F2: Improved loading dialog box The database loading dialog box now shows actual progress, and you can cancel loading databases:   Single suggestion improvement SQL Prompt no longer suggests keywords if the keyword has been typed and no other suggestions exist. Performance improvement SQL Prompt now has less impact on Management Studio start up time. What do you think? We want to hear your feedback about the beta. If you have any suggestions, or bugs to report, tell us on the SQL Prompt forum or our suggestions forum.

    Read the article

  • invitation: Oracle Endeca Information Discovery Bootcamp

    - by mseika
    The Oracle Endeca Information Discovery (OEID) Boot Camp is designed to give partners an understanding of OEID’s features, and how it complements the existing Oracle Business Intelligence suite. Participants will learn how to develop & implement solutions using a Data Discovery method. Training is in EnglishWhat will be covered?The Oracle Endeca Information Discovery (OEID) Boot Camp is a three-day class with a combination of lecture and hands-on exercises, tailored to make participants aware of the Oracle Endeca Information Discovery platform, and to gain valuable skills for the implementation of projects.The course will follow a combination of lectures and hands-on lab sessions, to allow participants to apply the knowledge they have gained by extracting from sample data sources, and creating an end-user application that will be used to answer several business questions. What You Will Learn Architecture: OEID Components, use of graphs, overview of clustering OEID Installation: Architecture planning, infrastructure requirements, installation process, production hints & tips OEID Administration: Data store management, administrative operations, portal configuration, data sources, system monitoring Indexing: Integration Suite, Data source analysis, Graph (ETL) creation, record design techniques Portlets: Studio portlets, custom portlet development, querying functions Reporting: Studio applications & best practices, visualizations, EQL PrerequisitesYou must bring a laptop with you for the Hands-on labs ENVIRONMENT – LAPTOP REQUIREMENTS For the OEID boot camp, participants will perform the hands-on lab exercises using a virtual machine image. These virtual machines will be provided to participants within a cloud environment, requiring participants to bring a laptop to the Boot Camp that can access a Windows server utilizing Microsoft RDP from their laptop. Participants will not need to install any software onto their laptops, but must ensure that they have the proper software installed for their OS, to connect through RDP to a server. HARDWARE • CPU: Dual-core, x64, 1.8Ghz or higher • RAM: 2GB SOFTWARE • Microsoft Remote Desktop Client • Internet Explorer 7, Firefox, or Google Chrome This boot camp is intended for prospective implementers of Oracle Endeca Information Discovery (OEID), or those in a presales role looking to gain insight into the technical benefits of this new package. Attendees should have experience and familiarity with the basic concepts of business intelligence. Where and When ? Monday, October 15th until wednesday, October 17th included 9:00 - 18:00 Oracle France 15, boulevard Charles de Gaulle 92715 Colombes Access Register Here Limited number of seats !

    Read the article

  • USB Ports In Wrong Mode, How To Use usbmodeswitch?

    - by user86872
    I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

    Read the article

  • Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

    - by Iohannes
    After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

    Read the article

  • How to improve Minecraft-esque voxel world performance?

    - by SomeXnaChump
    After playing Minecraft I marveled a bit at its large worlds but at the same time I found them extremely slow to navigate, even with a quad core and meaty graphics card. Now I assume Minecraft is fairly slow because: A) It's written in Java, and as most of the spatial partitioning and memory management activities happen in there, it would naturally be slower than a native C++ version. B) It doesn't partition its world very well. I could be wrong on both assumptions; however it got me thinking about the best way to manage large voxel worlds. As it is a true 3D world, where a block can exist in any part of the world, it is basically a big 3D array [x][y][z], where each block in the world has a type (i.e BlockType.Empty = 0, BlockType.Dirt = 1 etc.) Now, I am assuming to make this sort of world perform well you would need to: A) Use a tree of some variety (oct/kd/bsp) to split all the cubes out; it seems like an oct/kd would be the better option as you can just partition on a per cube level not a per triangle level. B) Use some algorithm to work out which blocks can currently be seen, as blocks closer to the user could obfuscate the blocks behind, making it pointless to render them. C) Keep the block object themselves lightweight, so it is quick to add and remove them from the trees. I guess there is no right answer to this, but I would be interested to see peoples' opinions on the subject. How would you improve performance in a large voxel-based world?

    Read the article

  • Hurry! See the uncensored OOW videos before they get edited!

    - by rickramsey
    source Uploaded so far: Which Oracle Solaris 11 Technologies Have Sysadmins Been Using Most? Director's Cut - Uncensored - Markus Flierl, VP Solaris Core Engineering, describes how Oracle Solaris 11 customers are taking advantage of the Image Packaging System and the snapshot capability of ZFS to run more frequent updates of not only the OS, but also the applications (agile development, anyone?), and how they're using the network virtualization capabilities in Oracle Solaris 11 to isolate applications and manage workloads on the cloud. Watch How Hybrid Columnar Compression Saves Storage Space Director's Cut - Uncensored - Art Licht shows how hyprid columnar compression (HCC) compresses data 30x without slowing down other queries that the database is performing. First he shows what happens when he runs database queries without HCC, then he shows what happens when he runs the queries with HCC. Security Capabilities and Design in Oracle Solaris 11 Director's Cut - Uncensored - Compliance reporting. Extended policy. Immutable zones. Three of the best minds in Oracle Solaris security explain what they are, what customers are doing with them, and how they were engineered. Filmed at Oracle Open World 2012. Why DTrace and Ksplice Have Made Oracle Linux 6 Popular with Sysadmins Use the DTrace scripts you wrote for Oracle Solaris on Oracle Linux without modification. Wim Coekaerts, VP of Engineering for Oracle Linux, explains how this capability of DTrace, the zero downtime updates enabled by KSplice, and other performance and stability enhancements have made Oracle Linux 6 popular with sysadmins. Why Solaris 11 Is Being Adopted Faster Than Solaris 10 Sneak Preview - Uncut Version - Lynn Rohrer, Director of Oracle Solaris Product Management explains why customers are adopting Oracle Solaris 11 at a faster rate than Oracle Solaris 10, and proves why you should never challenge a Montana woman to a test of strength. What Forsythe Corp Is Helping Its Customers Do With Oracle Solaris 11 Director's Cut - Unedited - Lee Diamante, Solutions Architect for Forsythe Corp, an Oracle Solaris Partner, explains why Forsythe has been recommending Oracle Solaris to its customers, and what those customers have been doing with it. Lots more to come ... - Rick Website Newsletter Facebook Twitter

    Read the article

  • 12.10 upgrade broke brightness keys [closed]

    - by Chris Morgan
    I have been running Ubuntu (64-bit) on my HP 6710b laptop (Core 2 Duo with integrated graphics) for several years, and the backlight brightness keys have always worked. Since I upgraded to Ubuntu 12.10 earlier today, those keys do not work any more. The secondary function keys: Fn+F3: sleep; still works (and considerably faster than ever before!) Fn+F8: battery info; still works Fn+F9: reduce brightness; stopped working in 12.10 Fn+F10: increase brightness; stopped working in 12.10 It may also be worth while mentioning that X does not appear to be receiving the brightness events at all, or at least not sending them out further. (This I detected with a key logger I wrote for a Uni project, which uses X's Record extension; it is informed of the sleep and battery info keystrokes, but doesn't receive the brightness ones at all.) In the mean time, I know that I can use the Brightness & Lock settings screen to alter the brightness. (Wow! I can suddenly make my backlight darker than I could before—I can go right down to turning the backlight off, something I couldn't do before... but this model has a fairly dim screen, so I don't expect to use that much, if ever.) How can I get the brightness keys working again? This question is probably strongly related to I can't control my Brightness in HP Compaq 6710s.

    Read the article

  • Effect of using dedicated NVidia card instead of Intel HD4000

    - by Sman789
    Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

    Read the article

  • Are the only types of data "sources" static and dynamic?

    - by blunders
    Thinking that there might be others, but not sure -- but before getting into that, let me explain what I mean by static and dynamic data sources. Static (or datastore) - Meaning that the data's state is non-changing, and if was changed, that would be a new state, and the old data would be considered stateless; meaning it no longer is known to exist, or not exist. Another way of possibly looking at a static data source might be that if read and written back without modification, the checksum for before and after should be exactly the same regardless of the duration of time between the reading and rewriting of the data. Examples: Photos, Files, Database Record, Dynamic (or datastream) - Meaning that the data's state is known to be in flux, and never expected to be the same per input. Example: Live video/audio feed, Stock Market feed, First let me say, the above is a very loose mapping of the concepts, and I'd welcome any feedback. Next, onto the core of the question, that being are these the only two types of data sources. My guess, is that yes, they are -- but that there are hybrid versions of the two. That being, streaming data that has a fixed state. For example, the data being streamed has a checksum given and each unique checksum is known to be a single instance of static data. On the flip side, static data could be chained via say a version control system; when played back, each version might be viewed as a segment of a stream; thing is, the very fact that it can be played back makes the data source static. Another type might be that the data source is being organically discovered, and it's simply unknown what the state is. Questions, feedback, requests -- just comment, thanks!!

    Read the article

  • XPath & XML EDI B2B

    - by PearlFactory
    GoodToGo :) Best XML Editor is Altova XMLSpy 2011 http://www.torrenthound.com/hash/bfdbf55baa4ca6f8e93464c9a42cbd66450bb950/torrent-info/Altova-XMLSpy-Enterprise-Edition-SP1-2011-v13-0-1-0-h33t-com-Full For whatever reason Piratebay has trojans and other nasties..Search in torrent.eu for Altova XMLSpy Enterprise Edition SP1 2011 v13.0.1.0 Also if you like the product purchase it in a Commercial Enviroment Any well structured/complex XML can be parsed @ the speed of light using XPATH querys and not the C# objects XPathNodeIterator and others etc ....Never do loops  or Genirics or whatever highlevel language technology. Use the power of XPATH i.e Will use a Simple (Do while) as an example. We could have many different techs all achieveing the same result Instead of   xmlNI2 = xmlNav.Select("/p:BookShop")         if (xmlNI2.Count != 0)            {                                 while ((xmlNI2.MoveNext()))              string aNode =xmlNI2.SelectSingleNode('Book', nsmgr); if (aNode =="The Book I am after")       Console.WriteLine("Found My Book);   This lengthy cumbersome task can be achieved with a simple XPATH query Console.WriteLine((xmlNavg.SelectSingleNode("/p:BookShop/Book[.='The Book I am aFter ']", nsmgr)).Value.ToString()); Use the power of the parser and eliminate the middleman C#/MSIL/JIT etc etc Get Started Fast and use the parser as Outlined 1) Open XML and goto Grid Mode 2) Select XPATH tab on the bottom viewer/window as shown  From here you get intellisense and can quickly learn how to navigate/find the data using XPATH A key component to Navigation with XPATH is to use the "../ " command . This basically says from where I am now go up 1 level . With Xpath all commands are cumalative. i.e you can search for a book title @ the 2nd level of the XML and from there traverse 15 layers to paragraphs or words on a page with expression validation occuring throughout this process etc  (So in essence you may have arrived @ a node within the XML and have met 15 conditions along the way ) Given 1-2 days with XmlSpy and XPATH you unlock a technology that is super fast and simple to use. XML is a core component to what lays under the hood of so many techs. So it is no wonder that you want to be able to goto  the atomic level to achieve the result you want Justin P.S For a long time I saw XML as slow and a bit boring but now converted

    Read the article

  • Can't run minecraft on ubuntu 12.04 lts [duplicate]

    - by user170011
    This question already has an answer here: How to correctly install and troubleshoot Minecraft (Client) 3 answers I was trying to run minecraft on my laptop with ubuntu 12.04 lts 64 bit. I have a lenovo ideapad p580 with 7.7 Gb and an Intel® Core™ i7-3520M CPU @ 2.90GHz × 4 processor. Under the graphics section of the system overview in ubuntu it says I have none installed. My computer comes with and nvidia geforce graphics card but it isnt recognized. When I start minecraft I get this crash report. ---- Minecraft Crash Report ---- // Shall we play a game? Time: 24/06/13 7:23 PM Description: Failed to start game org.lwjgl.LWJGLException: Could not init GLX at org.lwjgl.opengl.LinuxDisplayPeerInfo.initDefaultPeerInfo(Native Method) at org.lwjgl.opengl.LinuxDisplayPeerInfo.<init>(LinuxDisplayPeerInfo.java:52) at org.lwjgl.opengl.LinuxDisplay.createPeerInfo(LinuxDisplay.java:684) at org.lwjgl.opengl.Display.create(Display.java:854) at org.lwjgl.opengl.Display.create(Display.java:784) at org.lwjgl.opengl.Display.create(Display.java:765) at net.minecraft.client.Minecraft.a(SourceFile:235) at avv.a(SourceFile:56) at net.minecraft.client.Minecraft.run(SourceFile:507) at java.lang.Thread.run(Thread.java:679) A detailed walkthrough of the error, its code path and all known details is as follows: -- System Details -- Details: Minecraft Version: 1.5.2 Operating System: Linux (amd64) version 3.5.0-34-generic Java Version: 1.6.0_27, Sun Microsystems Inc. Java VM Version: OpenJDK 64-Bit Server VM (mixed mode), Sun Microsystems Inc. Memory: 406175448 bytes (387 MB) / 514523136 bytes (490 MB) up to 1908932608 bytes (1820 MB) JVM Flags: 2 total; -Xmx2048M -Xms512M AABB Pool Size: 0 (0 bytes; 0 MB) allocated, 0 (0 bytes; 0 MB) used Suspicious classes: No suspicious classes found. IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 LWJGL: 2.4.2 OpenGL: ~~ERROR~~ NullPointerException: null Is Modded: Probably not. Jar signature remains and client brand is untouched. Type: Client (map_client.txt) Texture Pack: Default Profiler Position: N/A (disabled) Vec3 Pool Size: ~~ERROR~~ NullPointerException: null I can run it on different versions of linux such as fedora.

    Read the article

  • 11.10 liveCD black screen

    - by Shaun Killingbeck
    Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

    Read the article

  • Restart and/or graphics problem in Ubuntu 12.04

    - by kara
    I having been using 12.04 for a couple of months now, with v. little problems. The other day I restarted my computer, and though I think it rebooted, the screen would be black. I could not even get a visual from a live cd. Finally, I was able to get it to load, but the resolution has been completely off. The computer thinks I have a laptop screen, when I actually have a ViewSonic VP2330wb, and it detects only two resolutions. And still, I have a problem with rebooting. If the screen locks after I leave it for a while, I can't get a visual back, and then when I force a shutdown, it takes 3 times for me to get a grub screen. Then I have to boot in recovery mode, and then finally in normal mode, but the screen is still always off. This is my video card: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fe000000-fe3fffff memory:d0000000-dfffffff ioport:f000(size=64) I am a new ubuntu user, and am at my wits end. Any help would be greatly appreciated.

    Read the article

  • Making money from a custom built interpreter?

    - by annoying_squid
    I have been making considerable progress lately on building an interpreter. I am building it from NASM assembly code (for the core engine) and C (cl.exe the Microsoft compiler for the parser). I really don't have a lot of time but I have a lot of good ideas on how to build this so it appeals to a certain niche market. I'd love to finish this but I need to face reality here ... unless I can make some good monetary return on my investment, there is not a lot of time for me to invest. So I ask the following questions to anyone out there, especially those who have experience in monetizing their programs: 1) How easy is it for a programmer to make good money from one design? (I know this is vague but it will be interesting to hear from those who have experience or know of others' experiences). 2) What are the biggest obstacles to making money from a programming design? 3) For the parser, I am using the Microsoft compiler (no IDE) I got from visual express, so will this be an issue? Will I have to pay royalties or a license fee? 4) As far as I know NASM is a 2-clause BSD licensed application. So this should allow me to use NASM for commericial development unless I am missing something? It's good to know these things before launching into the meat and potatoes of the project.

    Read the article

  • The Correct Usage of DLLs with a DirectX Game?

    - by smoth190
    I'm using DirectX 10 (in C++) to make a game engine, and a test driver program on top of it. Now that I've written many messy rough drafts of an engine, I want to make the final (or sorta final) clean version. I choose to follow how I've seen other engines do it, and that's to have all the core nasty messy crap in a DLL, and then you can create games with just a few functions (well, not really :D). However, I'm unsure of what nasty messy crap to put in that DLL. I don't know about speed restrictions with DLLs. What I've done is put my winproc in the DLL, and have a class that takes the messages, and sends them through to the program using the DLL. Then that program does what it needs to do, and calls a rendering functions back in the DLL that renders everything. Only problem is it gets very low FPS (2, to be exact...). I've looked through everything, and I don't know if the way I'm using DLLs in causing this, or its something different. Whether it's the DLLs or not, I still want to know how to use a DLL correctly with a game engine. I like being neat, I hate having to see all those long names of DirectX classes. I use typedef a lot.

    Read the article

  • Java's Object.wait method with nanoseconds: Is this a joke or am I missing something

    - by Krumia
    I was checking out the Java API source code (Java 8) just out of curiosity. And I found this in java/lang/Object.java. There are three methods named wait: public final native void wait(long timeout): This is the core of all wait methods, which has a native implementation. public final void wait(): Just calls wait(0). And then there is public final void wait(long timeout, int nanos). The JavaDoc for the particular method tells me that, This method is similar to the wait method of one argument, but it allows finer control over the amount of time to wait for a notification before giving up. The amount of real time, measured in nanoseconds, is given by: 1000000*timeout+nanos But this is how the methods achieves "finer control over the amount of time to wait": if (nanos >= 500000 || (nanos != 0 && timeout == 0)) { timeout++; } wait(timeout); So this method basically does a crude rounding up of nanoseconds to milliseconds. Not to mention that anything below 500000ns/0.5ms will be ignored. Is this piece of code bad/unnecessary code, or am I missing some unseen virtue of declaring this method, and it's no argument cousin as the way they are?

    Read the article

  • Google Analytics: How long does it take users to trigger an event

    - by Stephen Ostermiller
    I implemented Google Analytics event tracking on my currency conversion website. The typical user flow is: User lands on a page about two currencies. User enters an amount to be converted. The site shows the user the value in the other currency. The JavaScript sends Google Analytics an "converted" event when the currency conversion is done. Because most of the sessions on my site are single page, the event tracking is very important to me to be able to know if users find my page useful. I'm looking for a way to be able to figure out how long it typically takes users to enter a value in the form. I expect that this data would form a bell curve with around a specific amount of time after page load. If I can't get a graph, I could make do with a median value. I would like to be able to use this as a core metric around usability testing. Is there a way to get this information out of Google Analytics?

    Read the article

  • Lead Programmer definition clarification

    - by Junaid
    I am working on PHP and MySQL based web application for more than 5 years now. I started my career from Intern - Jr Developer - Software Developer - Sr. Software Engineer [Team Lead] that's what I am nowadays. I was looking at the link at Wikipedia regarding who is a lead programmer. The link states the following: A lead programmer is a software engineer in charge of one or more software projects. Alternative titles include Development Lead, Technical Lead, Senior Software Engineer, Software Design Engineer Lead (SDE Lead), Software Manager, or Senior Applications Developer. When primarily contributing in a high-level enterprise software design role, the title Software Architect (or similar) is often used. All of these titles can have different meanings depending on the context. My current job responsibilities are more or less like a Development Lead and to some extent near Software Architect because I usually design the core structure of new products and managing 2-3 project simultaneously and in the meantime involved in assisting other teams regarding the structural design of their projects, I am usually on call with clients along with project managers, I code most of the time when my team stuck somewhere / workload / integrating some third party API and etc. Primary reason of this writing is to know if I qualify for a Development Lead Title? in accordance with my above mentioned job descriptions?

    Read the article

  • I can't enable extra effects in Ubuntu 10.10. Please help?

    - by jasoncruz98
    I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

    Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >