function declaration - Page 251

Remove accents from String .NET

- by developerit

Private Const ACCENT As String = “ÀÁÂÃÄÅàáâãäåÒÓÔÕÖØòóôõöøÈÉÊËèéêëÌÍÎÏìíîïÙÚÛÜùúûüÿÑñÇç” Private Const SANSACCENT As String = “AAAAAAaaaaaaOOOOOOooooooEEEEeeeeIIIIiiiiUUUUuuuuyNnCc” Public Shared Function FormatForUrl(ByVal uriBase As String) As String If String.IsNullOrEmpty(uriBase) Then Return uriBase End If ‘// Declaration de variables Dim chaine As String = uriBase.Trim.Replace(” “, “-”) chaine = chaine.Replace(” “c, “-”c) chaine = chaine.Replace(“–”, “-”) chaine = chaine.Replace(“‘”c, String.Empty) chaine = chaine.Replace(“?”c, String.Empty) chaine = chaine.Replace(“#”c, String.Empty) chaine = chaine.Replace(“:”c, String.Empty) chaine = chaine.Replace(“;”c, String.Empty) ‘// Conversion des chaines en tableaux de caractŠres Dim tableauSansAccent As Char() = SANSACCENT.ToCharArray Dim tableauAccent As Char() = ACCENT.ToCharArray ‘// Pour chaque accent For i As Integer = 0 To ACCENT.Length – 1 ‘ // Remplacement de l’accent par son ‚quivalent sans accent dans la chaŒne de caractŠres chaine = chaine.Replace(tableauAccent(i).ToString(), tableauSansAccent(i).ToString()) Next ‘// Retour du resultat Return chaine End Function

Read the article

C# 4.0: Named And Optional Arguments

- by Paulo Morgado

As part of the co-evolution effort of C# and Visual Basic, C# 4.0 introduces Named and Optional Arguments. First of all, let’s clarify what are arguments and parameters: Method definition parameters are the input variables of the method. Method call arguments are the values provided to the method parameters. In fact, the C# Language Specification states the following on §7.5: The argument list (§7.5.1) of a function member invocation provides actual values or variable references for the parameters of the function member. Given the above definitions, we can state that: Parameters have always been named and still are. Parameters have never been optional and still aren’t. Named Arguments Until now, the way the C# compiler matched method call definition arguments with method parameters was by position. The first argument provides the value for the first parameter, the second argument provides the value for the second parameter, and so on and so on, regardless of the name of the parameters. If a parameter was missing a corresponding argument to provide its value, the compiler would emit a compilation error. For this call: Greeting("Mr.", "Morgado", 42); this method: public void Greeting(string title, string name, int age) will receive as parameters: title: “Mr.” name: “Morgado” age: 42 What this new feature allows is to use the names of the parameters to identify the corresponding arguments in the form: name:value Not all arguments in the argument list must be named. However, all named arguments must be at the end of the argument list. The matching between arguments (and the evaluation of its value) and parameters will be done first by name for the named arguments and than by position for the unnamed arguments. This means that, for this method definition: public static void Method(int first, int second, int third) this call declaration: int i = 0; Method(i, third: i++, second: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = i++; int CS$0$0001 = ++i; Method(i, CS$0$0001, CS$0$0000); which will give the method the following parameter values: first: 2 second: 2 third: 0 Notice the variable names. Although invalid being invalid C# identifiers, they are valid .NET identifiers and thus avoiding collision between user written and compiler generated code. Besides allowing to re-order of the argument list, this feature is very useful for auto-documenting the code, for example, when the argument list is very long or not clear, from the call site, what the arguments are. Optional Arguments Parameters can now have default values: public static void Method(int first, int second = 2, int third = 3) Parameters with default values must be the last in the parameter list and its value is used as the value of the parameter if the corresponding argument is missing from the method call declaration. For this call declaration: int i = 0; Method(i, third: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = ++i; Method(i, 2, CS$0$0000); which will give the method the following parameter values: first: 1 second: 2 third: 1 Because, when method parameters have default values, arguments can be omitted from the call declaration, this might seem like method overloading or a good replacement for it, but it isn’t. Although methods like this: public static StreamReader OpenTextFile( string path, Encoding encoding = null, bool detectEncoding = true, int bufferSize = 1024) allow to have its calls written like this: OpenTextFile("foo.txt", Encoding.UTF8); OpenTextFile("foo.txt", Encoding.UTF8, bufferSize: 4096); OpenTextFile( bufferSize: 4096, path: "foo.txt", detectEncoding: false); The complier handles default values like constant fields taking the value and useing it instead of a reference to the value. So, like with constant fields, methods with parameters with default values are exposed publicly (and remember that internal members might be publicly accessible – InternalsVisibleToAttribute). If such methods are publicly accessible and used by another assembly, those values will be hard coded in the calling code and, if the called assembly has its default values changed, they won’t be assumed by already compiled code. At the first glance, I though that using optional arguments for “bad” written code was great, but the ability to write code like that was just pure evil. But than I realized that, since I use private constant fields, it’s OK to use default parameter values on privately accessed methods.

Read the article

Knockoutjs - stringify to handling observables and custom events

- by Renso

Goal: Once you viewmodel has been built and populated with data, at some point it goal of it all is to persist the data to the database (or some other media). Regardless of where you want to save it, your client-side viewmodel needs to be converted to a JSON string and sent back to the server. Environment considerations: jQuery 1.4.3+ Knockoutjs version 1.1.2 How to: So let’s set the stage, you are using Knockoutjs and you have a viewmodel with some Knockout dependencies. You want to make sure it is in the proper JSON format and via ajax post it to the server for persistence. First order of business is to deal with the viewmodel (JSON) object. To most the JSON stringifier sounds familiar. The JSON stringifier converts JavaScript data structures into JSON text. JSON does not support cyclic data structures, so be careful to not give cyclical structures to the JSON stringifier. You may ask, is this the best way to do it? What about those observables and other Knockout properties that I don’t want to persist or want their actual value persisted and not their function, etc. Not sure if you were aware, but KO already has a method; ko.utils.stringifyJson() - it's mostly just a wrapper around JSON.stringify. (which is native in some browsers, and can be made available by referencing json2.js in others). What does it do that the regular stringify does not is that it automatically converts observable, dependentObservable, or observableArray to their underlying value to JSON. Hold on! There is a new feature in this version of Knockout, the ko.toJSON. It is part of the core library and it will clone the view model’s object graph, so you don’t mess it up after you have stringified it and unwrap all its observables. It's smart enough to avoid reference cycles. Since you are using the MVVM pattern it would assume you are not trying to reference DOM nodes from your view. Wait a minute. I can already see this info on the http://knockoutjs.com/examples/contactsEditor.html website, why mention it all here? First of this is a much nicer blog, no orange ? At this time, you may want to have a look at the blog and see what I am talking about. See the save event, how they stringify the view model’s contacts only? That’s cool but what if your view model is a representation of your object you want to persist, meaning it has no property that represents the json object you want to persist, it is the view model itself. The example in http://knockoutjs.com/examples/contactsEditor.html assumes you have a list of contacts you may want to persist. In the example here, you want to persist the view model itself. The viewmodel here looks something like this: var myViewmodel = { accountName: ko.observable(""), accountType: ko.observable("Active") }; myViewmodel.isItActive = ko.dependentObservable(function () { return myViewmodel.accountType() == "Active"; }); myViewmodel.clickToSaveMe = function() { SaveTheAccount(); }; Here is the function in charge of saving the account: Function SaveTheAccount() { $.ajax({ data: ko.toJSON(viewmodel), url: $('#ajaxSaveAccountUrl').val(), type: "POST", dataType: "json", async: false, success: function (result) { if (result && result.Success == true) { $('#accountMessage').html('<span class="fadeMyContainerSlowly">The account has been saved</span>').show(); FadeContainerAwaySlowly(); } }, error: function (xmlHttpRequest, textStatus, errorThrown) { alert('An error occurred: ' + errorThrown); } }); //ajax }; Try run this and your browser will eventually freeze up or crash. Firebug will tell you that you have a repetitive call to the first function call in your model that keeps firing infinitely. What is happening is that Knockout serializes the view model to a JSON string by traversing the object graph and firing off the functions, again-and-again. Not sure why it does that, but it does. So what is the work around: Nullify your function calls and then post it: var lightweightModel = viewmodel.clickToSaveMe = null; data: ko.toJSON(lightweightModel), So then I traced the JSON string on the server and found it having issues with primitive types. C#, by the way. So I changed ko.toJSON(model) to ko.toJS(model), and that solved my problem. Of course you could just create a property on the viewmodel for the account itself, so you only have to serialize the property and not the entire viewmodel. If that is an option then that would be the way to go. If your view model contains other properties in the view model that you also want to post then that would not be an option and then you’ll know what to watch out for. Hope this helps.

Read the article

Getting Started with TypeScript – Classes, Static Types and Interfaces

- by dwahlin

I had the opportunity to speak on different JavaScript topics at DevConnections in Las Vegas this fall and heard a lot of interesting comments about JavaScript as I talked with people. The most frequent comment I heard from people was, “I guess it’s time to start learning JavaScript”. Yep – if you don’t already know JavaScript then it’s time to learn it. As HTML5 becomes more and more popular the amount of JavaScript code written will definitely increase. After all, many of the HTML5 features available in browsers have little to do with “tags” and more to do with JavaScript (web workers, web sockets, canvas, local storage, etc.). As the amount of JavaScript code being used in applications increases, it’s more important than ever to structure the code in a way that’s maintainable and easy to debug. While JavaScript patterns can certainly be used (check out my previous posts on the subject or my course on Pluralsight.com), several alternatives have come onto the scene such as CoffeeScript, Dart and TypeScript. In this post I’ll describe some of the features TypeScript offers and the benefits that they can potentially offer enterprise-scale JavaScript applications. It’s important to note that while TypeScript has several great features, it’s definitely not for everyone or every project especially given how new it is. The goal of this post isn’t to convince you to use TypeScript instead of standard JavaScript….I’m a big fan of JavaScript. Instead, I’ll present several TypeScript features and let you make the decision as to whether TypeScript is a good fit for your applications. TypeScript Overview Here’s the official definition of TypeScript from the http://typescriptlang.org site: “TypeScript is a language for application-scale JavaScript development. TypeScript is a typed superset of JavaScript that compiles to plain JavaScript. Any browser. Any host. Any OS. Open Source.” TypeScript was created by Anders Hejlsberg (the creator of the C# language) and his team at Microsoft. To sum it up, TypeScript is a new language that can be compiled to JavaScript much like alternatives such as CoffeeScript or Dart. It isn’t a stand-alone language that’s completely separate from JavaScript’s roots though. It’s a superset of JavaScript which means that standard JavaScript code can be placed in a TypeScript file (a file with a .ts extension) and used directly. That’s a very important point/feature of the language since it means you can use existing code and frameworks with TypeScript without having to do major code conversions to make it all work. Once a TypeScript file is saved it can be compiled to JavaScript using TypeScript’s tsc.exe compiler tool or by using a variety of editors/tools. TypeScript offers several key features. First, it provides built-in type support meaning that you define variables and function parameters as being “string”, “number”, “bool”, and more to avoid incorrect types being assigned to variables or passed to functions. Second, TypeScript provides a way to write modular code by directly supporting class and module definitions and it even provides support for custom interfaces that can be used to drive consistency. Finally, TypeScript integrates with several different tools such as Visual Studio, Sublime Text, Emacs, and Vi to provide syntax highlighting, code help, build support, and more depending on the editor. Find out more about editor support at http://www.typescriptlang.org/#Download. TypeScript can also be used with existing JavaScript frameworks such as Node.js, jQuery, and others and even catch type issues and provide enhanced code help. Special “declaration” files that have a d.ts extension are available for Node.js, jQuery, and other libraries out-of-the-box. Visit http://typescript.codeplex.com/SourceControl/changeset/view/fe3bc0bfce1f#samples%2fjquery%2fjquery.d.ts for an example of a jQuery TypeScript declaration file that can be used with tools such as Visual Studio 2012 to provide additional code help and ensure that a string isn’t passed to a parameter that expects a number. Although declaration files certainly aren’t required, TypeScript’s support for declaration files makes it easier to catch issues upfront while working with existing libraries such as jQuery. In the future I expect TypeScript declaration files will be released for different HTML5 APIs such as canvas, local storage, and others as well as some of the more popular JavaScript libraries and frameworks. Getting Started with TypeScript To get started learning TypeScript visit the TypeScript Playground available at http://www.typescriptlang.org. Using the playground editor you can experiment with TypeScript code, get code help as you type, and see the JavaScript that TypeScript generates once it’s compiled. Here’s an example of the TypeScript playground in action: One of the first things that may stand out to you about the code shown above is that classes can be defined in TypeScript. This makes it easy to group related variables and functions into a container which helps tremendously with re-use and maintainability especially in enterprise-scale JavaScript applications. While you can certainly simulate classes using JavaScript patterns (note that ECMAScript 6 will support classes directly), TypeScript makes it quite easy especially if you come from an object-oriented programming background. An example of the Greeter class shown in the TypeScript Playground is shown next: class Greeter { greeting: string; constructor (message: string) { this.greeting = message; } greet() { return "Hello, " + this.greeting; } } Looking through the code you’ll notice that static types can be defined on variables and parameters such as greeting: string, that constructors can be defined, and that functions can be defined such as greet(). The ability to define static types is a key feature of TypeScript (and where its name comes from) that can help identify bugs upfront before even running the code. Many types are supported including primitive types like string, number, bool, undefined, and null as well as object literals and more complex types such as HTMLInputElement (for an <input> tag). Custom types can be defined as well. The JavaScript output by compiling the TypeScript Greeter class (using an editor like Visual Studio, Sublime Text, or the tsc.exe compiler) is shown next: var Greeter = (function () { function Greeter(message) { this.greeting = message; } Greeter.prototype.greet = function () { return "Hello, " + this.greeting; }; return Greeter; })(); Notice that the code is using JavaScript prototyping and closures to simulate a Greeter class in JavaScript. The body of the code is wrapped with a self-invoking function to take the variables and functions out of the global JavaScript scope. This is important feature that helps avoid naming collisions between variables and functions. In cases where you’d like to wrap a class in a naming container (similar to a namespace in C# or a package in Java) you can use TypeScript’s module keyword. The following code shows an example of wrapping an AcmeCorp module around the Greeter class. In order to create a new instance of Greeter the module name must now be used. This can help avoid naming collisions that may occur with the Greeter class. module AcmeCorp { export class Greeter { greeting: string; constructor (message: string) { this.greeting = message; } greet() { return "Hello, " + this.greeting; } } } var greeter = new AcmeCorp.Greeter("world"); In addition to being able to define custom classes and modules in TypeScript, you can also take advantage of inheritance by using TypeScript’s extends keyword. The following code shows an example of using inheritance to define two report objects: class Report { name: string; constructor (name: string) { this.name = name; } print() { alert("Report: " + this.name); } } class FinanceReport extends Report { constructor (name: string) { super(name); } print() { alert("Finance Report: " + this.name); } getLineItems() { alert("5 line items"); } } var report = new FinanceReport("Month's Sales"); report.print(); report.getLineItems(); In this example a base Report class is defined that has a variable (name), a constructor that accepts a name parameter of type string, and a function named print(). The FinanceReport class inherits from Report by using TypeScript’s extends keyword. As a result, it automatically has access to the print() function in the base class. In this example the FinanceReport overrides the base class’s print() method and adds its own. The FinanceReport class also forwards the name value it receives in the constructor to the base class using the super() call. TypeScript also supports the creation of custom interfaces when you need to provide consistency across a set of objects. The following code shows an example of an interface named Thing (from the TypeScript samples) and a class named Plane that implements the interface to drive consistency across the app. Notice that the Plane class includes intersect and normal as a result of implementing the interface. interface Thing { intersect: (ray: Ray) => Intersection; normal: (pos: Vector) => Vector; surface: Surface; } class Plane implements Thing { normal: (pos: Vector) =>Vector; intersect: (ray: Ray) =>Intersection; constructor (norm: Vector, offset: number, public surface: Surface) { this.normal = function (pos: Vector) { return norm; } this.intersect = function (ray: Ray): Intersection { var denom = Vector.dot(norm, ray.dir); if (denom > 0) { return null; } else { var dist = (Vector.dot(norm, ray.start) + offset) / (-denom); return { thing: this, ray: ray, dist: dist }; } } } } At first glance it doesn’t appear that the surface member is implemented in Plane but it’s actually included automatically due to the public surface: Surface parameter in the constructor. Adding public varName: Type to a constructor automatically adds a typed variable into the class without having to explicitly write the code as with normal and intersect. TypeScript has additional language features but defining static types and creating classes, modules, and interfaces are some of the key features it offers. So is TypeScript right for you and your applications? That’s a not a question that I or anyone else can answer for you. You’ll need to give it a spin to see what you think. In future posts I’ll discuss additional details about TypeScript and how it can be used with enterprise-scale JavaScript applications. In the meantime, I’m in the process of working with John Papa on a new Typescript course for Pluralsight that we hope to have out in December of 2012.

Read the article

Upcoming Enhancements in AngularJS Integration in NetBeans IDE

- by Geertjan

New bleeding edge enhancements in AngularJS support in NetBeans IDE enable many more controllers to be found than in NetBeans IDE 7.4. The next version of NetBeans IDE parses all JavaScript files and checks for defined AngularJS controllers, such as the below: All recognized AngularJS controllers are offered in code completion, as shown below. In other words, code completion works better in finding AngularJS controllers. Another improvement is in the "Go To Declaration" feature. When you click Ctrl+Mouse over the name of a controller inside an NG-controller directive, you will be navigated to the related controller declaration. More accurate results can be shown in code completion mainly because there are changes in the generation of JavaScript virtual sources in an AngularJS page.

Read the article

jqGrid - dynamically load different drop down values for different rows depending on another column value

- by Renso

Goal: As we all know the jqGrid examples in the demo and the Wiki always refer to static values for drop down boxes. This of course is a personal preference but in dynamic design these values should be populated from the database/xml file, etc, ideally JSON formatted. Can you do this in jqGrid, yes, but with some custom coding which we will briefly show below (refer to some of my other blog entries for a more detailed discussion on this topic). What you CANNOT do in jqGrid, referrign here up and to version 3.8.x, is to load different drop down values for different rows in the jqGrid. Well, not without some trickery, which is what this discussion is about. Issue: Of course the issue is that jqGrid has been designed for high performance and thus I have no issue with them loading a reference to a single drop down values list for every column. This way if you have 500 rows or one, each row only refers to a single list for that particuolar column. Nice! SO how easy would it be to simply traverse the grid once loaded on gridComplete or loadComplete and simply load the select tag's options from scratch, via ajax, from memory variable, hard coded etc? Impossible! Since their is no embedded SELECT tag within each cell containing the drop down values (remeber it only has a reference to that list in memory), all you will see when you inspect the cell prior to clicking on it, or even before and on beforeEditCell, is an empty <TD></TD>. When trying to load that list via a click event on that cell will temporarily load the list but jqGrid's last internal callback event will remove it and replace it with the old one, and you are back to square one. Solution: Yes, after spending a few hours on this found a solution to the problem that does not require any updates to jqGrid source code, thank GOD! Before we get into the coding details, the solution here can of course be customized to suite your specific needs, this one loads the entire drop down list that would be needed across all rows once into global variable. I then parse this object that contains all the properties I need to filter the rows depending on which ones I want the user to see based off of another cell value in that row. This only happens when clicking the cell, so no performance penalty. You may of course to load it via ajax when the user clicks the cell, but I found it more effecient to load the entire list as part of jqGrid's normal editoptions: { multiple: false, value: listingStatus } colModel options which again keeps only a reference to the sinlge list, no duplciation. Lets get into the meat and potatoes of it. var acctId = $('#Id').val(); var data = $.ajax({ url: $('#ajaxGetAllMaterialsTrackingLookupDataUrl').val(), data: { accountId: acctId }, dataType: 'json', async: false, success: function(data, result) { if (!result) alert('Failure to retrieve the Alert related lookup data.'); } }).responseText; var lookupData = eval('(' + data + ')'); var listingCategory = lookupData.ListingCategory; var listingStatus = lookupData.ListingStatus; var catList = '{'; $(lookupData.ListingCategory).each(function() { catList += this.Id + ':"' + this.Name + '",'; }); catList += '}'; var lastsel; var ignoreAlert = true; $(item) .jqGrid({ url: listURL, postData: '', datatype: "local", colNames: ['Id', 'Name', 'Commission<br />Rep', 'Business<br />Group', 'Order<br />Date', 'Edit', 'TBD', 'Month', 'Year', 'Week', 'Product', 'Product<br />Type', 'Online/<br />Magazine', 'Materials', 'Special<br />Placement', 'Logo', 'Image', 'Text', 'Contact<br />Info', 'Everthing<br />In', 'Category', 'Status'], colModel: [ { name: 'Id', index: 'Id', hidden: true, hidedlg: true }, { name: 'AccountName', index: 'AccountName', align: "left", resizable: true, search: true, width: 100 }, { name: 'OnlineName', index: 'OnlineName', align: 'left', sortable: false, width: 80 }, { name: 'ListingCategoryName', index: 'ListingCategoryName', width: 85, editable: true, hidden: false, edittype: "select", editoptions: { multiple: false, value: eval('(' + catList + ')') }, editrules: { required: false }, formatoptions: { disabled: false} } ], jsonReader: { root: "List", page: "CurrentPage", total: "TotalPages", records: "TotalRecords", userdata: "Errors", repeatitems: false, id: "0" }, rowNum: $rows, rowList: [10, 20, 50, 200, 500, 1000, 2000], imgpath: jQueryImageRoot, pager: $(item + 'Pager'), shrinkToFit: true, width: 1455, recordtext: 'Traffic lines', sortname: 'OrderDate', viewrecords: true, sortorder: "asc", altRows: true, cellEdit: true, cellsubmit: "remote", cellurl: editURL + '?rows=' + $rows + '&page=1', loadComplete: function() { }, gridComplete: function() { }, loadError: function(xhr, st, err) { }, afterEditCell: function(rowid, cellname, value, iRow, iCol) { var select = $(item).find('td.edit-cell select'); $(item).find('td.edit-cell select option').each(function() { var option = $(this); var optionId = $(this).val(); $(lookupData.ListingCategory).each(function() { if (this.Id == optionId) { if (this.OnlineName != $(item).getCell(rowid, 'OnlineName')) { option.remove(); return false; } } }); }); }, search: true, searchdata: {}, caption: "List of all Traffic lines", editurl: editURL + '?rows=' + $rows + '&page=1', hiddengrid: hideGrid Here is the JSON data returned via the ajax call during the jqGrid function call above (NOTE it must be { async: false}: {"ListingCategory":[{"Id":29,"Name":"Document Imaging & Management","OnlineName":"RF Globalnet"} ,{"Id":1,"Name":"Ancillary Department Hardware","OnlineName":"Healthcare Technology Online"} ,{"Id":2,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":3,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":4,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":5,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":6,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":7,"Name":"EMR/EHR Software","OnlineName":"Healthcare Technology Online"}]} I only need the Id and Name for the drop down list, but the third column in the JSON object is important, it is the only that I match up with the OnlineName in the jqGrid column, and then in the loop during afterEditCell simply remove the ones I don't want the user to see. That's it!

Read the article

conflict with php zend libs and c++ libs(ctime) to build extension for php [migrated]

- by user69800

Im going to build an extension for PHP 5.3.x everything is OK when I build without vc++ lib. error C2039: 'clock_t' : is not a member of '`global namespace'' error C2873: 'clock_t' : symbol cannot be used in a using-declaration error C2039: 'asctime' : is not a member of '`global namespace'' error C2873: 'asctime' : symbol cannot be used in a using-declaration and... I include just and got this error. I know this problem is from my include header file in properties that required from PHP zend engine, But I do not know how solve this problem. thanks

Read the article

Solaris 11.1 changes building of code past the point of __NORETURN

- by alanc

While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

Read the article

How to specify ingredients in Schema.org (other than recipes or drugs)?

- by guillem

I'd like to use Schema.org for a series of product specs pages. The products are cosmetics (shampoos, creams, etc.) and ideally an INCI declaration will be included for every product. I'd like to use Schema.org in the declaration, but I cannot find a suitable category in Schema.org. Ingredients is meant for cooking recipes, and ActiveIngredient for (medical) drugs and dietary supplements. Did I overlook some part of the tree? Any ideas for a workaround? Or am I trying to do something out of scope?

Read the article

Retrieve enum value based on XmlEnumAttribute name value

- by CletusLoomis

I need a Generic function to retrieve the name or value of an enum based on the XmlEnumAttribute "Name" property of the enum. For example I have the following enum defined: Public Enum Currency <XmlEnum("00")> CDN = 1 <XmlEnum("01")> USA= 2 <XmlEnum("02")> EUR= 3 <XmlEnum("03")> JPN= 4 End Enum The first Currency enum value is 1; the enum name is "CDN"; and the XMLEnumAttribute Name property value is "00". If I have the enum value, I can retrieve the XmlEnumAttribute "Name" value using the following generic function: Public Function GetXmlAttrNameFromEnumValue(Of T)(ByVal pEnumVal As T) As String Dim type As Type = pEnumVal.GetType Dim info As FieldInfo = type.GetField([Enum].GetName(GetType(T), pEnumVal)) Dim att As XmlEnumAttribute = CType(info.GetCustomAttributes(GetType(XmlEnumAttribute), False)(0), XmlEnumAttribute) 'If there is an xmlattribute defined, return the name Return att.Name End Function So using the above function, I can specify the Currency enum type, pass a value of 1, and the return value will be "00". What I need is a function to perform if the opposite. If I have the XmlEnumAttribute Name value "00", I need a function to return a Currency enum with a value of 1. Just as useful would be a function that would return the enum name "CDN". I could then simply parse this to get the enum value. Any assistance would be appreciated.

Read the article

How to fix: "NPMethod called on non-NPObject wrapped JSObject" error?

- by chandra

HI, I am trying to call a method defined in flash object from javascript (firefox-3.0/Linux) and getting the exception: "NPMethod called on non- NPObject wrapped JSObject". If I use eval on window.document.flash_object.func() it throws "NPMethod called on non-NPObject wrapped JSObject". Where as, if I define a javascript function in side the page as given below: function myFunc() { return flash_object.func(); } and later do a eval of window.document.myFunc() it works fine. I am running the two evals through a test framework called Selenium. [eval(window.document.flash_object.func()) and eval(window.document.myFunc())]. The issues seems to be issue with invoking the flash-object method without passing 'this' reference. Here is sample html/js code to reproduce this issue: "NPMethod called on non-NPObject wrapped JSObject". <script> function changeColor() { mymovie.changeColor(); } function getColorNP() { var func = mymovie.getColor; func(); } </script> <button type="button" onclick="getColorNP();">getColorNP</button> <button type="button" onclick="getColor();">getColor</button> getColorNP throws the exception Error: NPMethod called on non-NPObject wrapped JSObject! Source File: http://my.host/Colors/colors.html getColorNP throws the exception Error: NPMethod called on non-NPObject wrapped JSObject! Source File: http://my.host/Colors/colors.html Now, question to javascript gurus: Given flash object and a method name, how do I invoke the method on that object. Lets say, a function takes two arguments: a flash object, and a method name as string. I want to do an eval on object.method() inside that function. Is this possible, if so, can you please explain me how this can be done. As flash object's method is not a standard javascript function, i think its not possible to function binding through bind(). Is there any other alternative? Thx, Chandra

Read the article

Pagination in Tab Content of Jquery UI

- by DR.GEWA

I am making a page with Jquery UI TABS. In one of tabs I want to make pagination for comments. I want such thing. When user clicks on the number of the page, the data of the page , which is linked will load via ajax in the tab. Here is my code <script type="text/javascript"> $(function() { $("#tabs").tabs(); }); $('#demo').tabs({ load: function(event, ui) { $('a', ui.panel).click(function() { $(ui.panel).load(this.href); return false; }); } }); </script> How can I change this , so that any link inside the content with lets say with id "pagination" <a href="/coments?page=12&user_id=12" id="pagination">12</a> ?? Thanks beforehand I tried recently like this even and no luck. This is from http://www.bannerite.com/jquerytest/index2.php Here it work <script type="text/javascript"> $(function() { $("#tabs").tabs(); var hijax = function(panel){ $('a', panel).click(function() { /**makes children 'a' on panel load via ajax, hence hijax*/ $(panel).load(this.href, null, function(){ /**recursively apply the hijax to newly loaded panels*/ hijax(panel); }); /**prevents propagation of click to document*/ return false; }); $('form', panel).css({background: 'yellow'}).ajaxForm({ target: panel, }); }; $('#demo ul').tabs({ /**initialize the tabs hijax pattern*/ load: function(tab, panel) { hijax(panel); } }); }); </script> HEre are the HTML part as Karl gived , but no succes. When clicking on Test link its going to another page........ When clicking on I wanted to post HTML here but because of users with less reputation <10 cant give HTML with links I have posted it here http://gevork.ru/2009/12/31/jquery-ui-tab-and-pagination-html/#more-58

Read the article

Problem with custom Equality in Entity Framework

- by Shimmy

Hello! I am using Entity Framework in my application. I implemented with the partial class of an entity the IEquatable<T> interface: Partial Class Address : Implements IEquatable(Of Address) 'Other part generated Public Overloads Function Equals(ByVal other As Address) As Boolean _ Implements System.IEquatable(Of Address).Equals If ReferenceEquals(Me, other) Then Return True Return AddressId = other.AddressId End Function Public Overrides Function Equals(ByVal obj As Object) As Boolean If obj Is Nothing Then Return MyBase.Equals(obj) If TypeOf obj Is Address Then Return Equals(DirectCast(obj, Address)) Else Return False End Function Public Overrides Function GetHashCode() As Integer Return AddressId.GetHashCode End Function End Class Now in my code I use it this way: Sub Main() Using e As New CompleteKitchenEntities Dim job = e.Job.FirstOrDefault Dim address As New Address() job.Addresses.Add(address) Dim contains1 = job.Addresses.Contains(address) 'True e.SaveChanges() Dim contains2 = job.Addresses.Contains(address) 'False 'The problem is that I can't remove it: Dim removed = job.Addresses.Remoeve(address) 'False End Using End Sub Note (I checked in the debugger visualizer) that the EntityCollection class stores its entities in HashSet so it has to do with the GetHashCode function, I want it to depend on the ID so entities are compared by their IDs. Please help me find what's wrong in the GetHashCode function (by ID) and what can I change to make it work. Thanks a lot.

Read the article

unable to get tooltip to work when usingjQuery load() content

- by user281867

Hi, I am having problem getting my tooltip to work when using the jQuery load() function. The tooltip works fine if i don't use load() to load external dynamic data. I googled and found the i may need to use live(), but I can't figure how to get it to work. Any suggestion? thank you!! Here is my scripts: function loadEMERContent(uid) { $("#ActionEWPNBook").load("ajaxLoadDATA.cfm?uid="+uid, null, showLoading); $("#EWPNBookloading").html(''); } function showLoading() { $("#EWPNBookloading").html(''); } function simple_tooltip(target_items, name){ $(target_items).each(function(i){ $("body").append(""+$(this).attr('title')+""); var my_tooltip = $("#"+name+i); $(this).removeAttr("title").mouseover(function(){ my_tooltip.css({opacity:0.8, display:"none"}).stop().fadeIn(400); }).mousemove(function(kmouse){ my_tooltip.css({left:kmouse.pageX+15, top:kmouse.pageY+15}); }).mouseout(function(){ my_tooltip.stop().fadeOut(400); }); }); } Here is my ajaxLoadDATA.cfm: Date Hours Modify Date #dateformat(vdate, "mm/dd/yyyy")##dateformat(vdate, "mm/dd/yyyy")# #hours# #dateformat(posted, "mm/dd/yyyy")# ACTIONS: Add Edit Cancel

Read the article

jQuery dropdown is really jumpy

- by Matthew Westrik

Hi, I'm making a dropdown menu with jquery (some of the code is borrowed from a tutorial by someone, although I forget who...). When I use the dropdown, it slides up and down really fast, and I can't figure it out. What do you think? HTML <div id="nav"> <ul class="topnav"> <li><a class="selected" href="#" title="home">home</a></li> <li><a href="events/" title="events calendar">events</a></li> <li><a href="photos/" title="photo gallery">photos</a></li> <li><a href="staff/" title="faculty">staff</a> <ul class="subnav"> <li><a href="#">Luke</a></li> <li><a href="#">Darth Vader</a></li> <li><a href="#">Princess Leia</a></li> <li><a href="#">Jabba the Hutt</a></li> </ul> </li> <li><a href="contact/" title="contact">contact</a></li> jQuery $(document).ready(function(){ $("ul.subnav").parent() .hover(function() { $(this).parent().find("ul.subnav").slideDown('fast').show(); //Drop down the subnav on hover... $(this).parent() .hover(function() { }, function(){ $(this).parent().find("ul.subnav").slideUp('slow'); }); $(this).parent().find("ul.subnav") .hover(function() { }, function(){ $(this).parent().find("ul.subnav").slideUp('slow'); }); }).hover(function() { $(this).addClass("subhover"); }, function(){ $(this).removeClass("subhover"); });

Read the article

How countdown get Synchronise with jquery using "jquery.countdown.js" plugin?

- by ricky roy

unable to get the correct Ans as i am getting from the Jquery I am using jquery.countdown.js ref. site http://keith-wood.name/countdown.html here is my code [WebMethod] public static String GetTime() { DateTime dt = new DateTime(); dt = Convert.ToDateTime("April 9, 2010 22:38:10"); return dt.ToString("dddd, dd MMMM yyyy HH:mm:ss"); } html file <script type="text/javascript" src="Scripts/jquery-1.3.2.js"></script> <script type="text/javascript" src="Scripts/jquery.countdown.js"></script> <script type="text/javascript"> $(function() { var shortly = new Date('April 9, 2010 22:38:10'); var newTime = new Date('April 9, 2010 22:38:10'); //for loop divid /// $('#defaultCountdown').countdown({ until: shortly, onExpiry: liftOff, onTick: watchCountdown, serverSync: serverTime }); $('#div1').countdown({ until: newTime }); }); function serverTime() { var time = null; $.ajax({ type: "POST", //Page Name (in which the method should be called) and method name url: "Default.aspx/GetTime", // If you want to pass parameter or data to server side function you can try line contentType: "application/json; charset=utf-8", dataType: "json", data: "{}", async: false, //else If you don't want to pass any value to server side function leave the data to blank line below //data: "{}", success: function(msg) { //Got the response from server and render to the client time = new Date(msg.d); alert(time); }, error: function(msg) { time = new Date(); alert('1'); } }); return time; } function watchCountdown() { } function liftOff() { } </script>

Read the article

Blockchain API, AJAX request has stopped working, CORS issues?

- by Sly

I've been playing with the multiple address look up API from blockchain info (documented here https://blockchain.info/api/blockchain_api), I had my code working earlier in the day but bizzarely it's stopped. The purpose of it is to eventually write a little JQuery library which will search the DOM for bitcoin addresses as data attributes and then insert the final balance into that element creating a polling mechanism to keep the page updated as well. The original problem I ran into earlier while developing it was because it's a CORS ajax request but later I adjusted the query per the blockchain info API documents and I added cors=true it then seemed to work fine but now it doesn't seem to want to work at all again. I don't get how changing computers would effect this kind of request. Here's my code on JSFiddle, http://jsfiddle.net/SlyFoxy12/9mr7L/7/ My primary code is: (function ($) { var methods = { init: function(data, options) { //put your init logic here. }, query_addresses: function(addresses) { var addresses_implode = addresses.join("|"); $.getJSON("http://blockchain.info/multiaddr?cors=true&active="+addresses_implode, function( data ) { $.each( data.addresses, function( index ) { $('#output').append(" "+data.addresses[index].final_balance); }); }); } }; $.fn.bitstrap = function () { var addresses = new Array(); $('[data-xbt-address]').each(function () { $(this).text($(this).data('xbtAddress')); addresses.push($(this).data('xbtAddress')); }); methods.query_addresses(addresses); } }(jQuery)); $().ready(function() { $().bitstrap(); });

Read the article

Map/Reduce on an array of hashes in CouchDB

- by sebastiangeiger

Hello everyone, I am looking for a map/reduce function to calculate the status in a Design Document. Below you can see an example document from my current database. { "_id": "0238f1414f2f95a47266ca43709a6591", "_rev": "22-24a741981b4de71f33cc70c7e5744442", "status": "retrieved image urls", "term": "Lucas Winter", "urls": [ { "status": "retrieved", "url": "http://...." }, { "status": "retrieved", "url": "http://..." } ], "search_depth": 1, "possible_labels": { "gender": "male" }, "couchrest-type": "SearchTerm" } I'd like to get rid of the status key and rather calculate it from the statuses of the urls. My current by_status view looks like the following: function(doc) { if (doc['status']) { emit(doc['status'], null); } } I tried some things but nothing actually works. Right now my Map Function looks like this: function(doc) { if(doc.urls){ emit(doc._id, doc.urls) } } And my Reduce Function function(key, value, rereduce){ var reduced_status = "retrieved" for(var url in value){ if(url.status=="new"){ reduced_status = "new"; } } return reduced_status; } The result is that I get retrieved everywhere which is definitely not right. I tried to narrow down the problem and it seems to be that value is no array, when I use the following Reduce Function I get length 1 everywhere, which is impossible because I have 12 documents in my database, each containing between 20 to 200 urls function(key, value, rereduce){ return value.length; } What am I doing wrong? (I know I want you to write code for me and I'm feeling guilty, but right now I do the calculation of the statuses in ruby after getting the data from the database. It would be nice to already get the right data from the database)

Read the article

javascript new Date(0) class shows 16 hours?

- by Jonah

interval = new Date(0); return interval.getHours(); The above returns 16. I expect it to return 0. Any pointers? getMinutes() and getSeconds() return zero as expected. Thanks! I am trying to make a timer: function Timer(onUpdate) { this.initialTime = 0; this.timeStart = null; this.onUpdate = onUpdate this.getTotalTime = function() { timeEnd = new Date(); diff = timeEnd.getTime() - this.timeStart.getTime(); return diff + this.initialTime; }; this.formatTime = function() { interval = new Date(this.getTotalTime()); return this.zeroPad(interval.getHours(), 2) + ":" + this.zeroPad(interval.getMinutes(),2) + ":" + this.zeroPad(interval.getSeconds(),2); }; this.start = function() { this.timeStart = new Date(); this.onUpdate(this.formatTime()); var timerInstance = this; setTimeout(function() { timerInstance.updateTime(); }, 1000); }; this.updateTime = function() { this.onUpdate(this.formatTime()); var timerInstance = this; setTimeout(function() { timerInstance.updateTime(); }, 1000); }; this.zeroPad = function(num,count) { var numZeropad = num + ''; while(numZeropad.length < count) { numZeropad = "0" + numZeropad; } return numZeropad; } } It all works fine except for the 16 hour difference. Any ideas?

Read the article

Fade out when user leaves page — jquery

- by Tom Julian Hume

I have some simple page transitions that fade in, once the user has landed. However, I'm also trying to make the same page fade out, when the user leaves. I have found a few solutions, but they appeared to use delay(). Are there any that don't? Thanks for any help, (I'm new to this, mind!) Tom :) I am currently using this code: $(document).ready( function(){ $( 'body' ).fadeIn(2000); $('#stop').click(function (e) { e.preventDefault(); }); $('#clients').click(function() { $("#projectinfo").slideUp('slow'); $("#us").fadeOut('slow'); $("ul").fadeToggle('slow'); }); $('#information').click(function() { $("#projectinfo").slideUp('slow'); $("ul").fadeOut('slow'); $("#us").fadeToggle('slow'); }); $('#question').click(function() { $("#projectinfo").slideToggle('slow'); }); $('#question').hover(function() { $("#projectinfo").slideToggle('slow'); }); $("a").click(function(event){ event.preventDefault(); linkLocation = this.href; $("body").fadeOut(1000, redirectPage); }); function redirectPage() { });

Read the article

Attached event triggering if event is same as current event

- by Psytronic

I have a button which start/stops a timer. When I click it, I remove the current event handler, and attach the opposite one. Ie, click "Stop", and the "Start" function is attached for the next click. However in IE (7), not sure about 8. The newly attached event is also triggering after the original function is finished: Lifeline in IE7: Button pushed -- "Stop" function begins -- "Stop" function removed -- "Start" function attached -- "Stop" function finishes -- "Start" function is called. I know it's to do with the attaching event bit, because If I remove it, the Start event doesn't fire. This seems a bit odd, as I have the same situation in the "Start" function, ie, "Start" removed, "Stop" called. But this doesn't seem to cause an infinite loop, thankfully. if(btn.attachEvent){ btn.detachEvent("onclick", stop); btn.attachEvent("onclick", start); }else if(btn.addEventListener){ btn.removeEventListener("click", stop, true); btn.addEventListener("click", start , true); } It all works fine in FF and Chrome. I have switched the order of attach/detach, just to see if it makes a difference, but it doesn't. Addendum Sorry, and no answers involving jQuery, Protoype et al. Its not something I want to integrate for this project.

Read the article

Combining 2 jquery scripts to work together

- by Nikos

I have these 2 scripts and the problem is that function check is called only if #hotel state is changed. How can I make function check run and in the case of #hotel doesn't change. var hotelMap = { hotel_a: 15, hotel_b: 5, hotel_c: 10 }; $(function() { $('#hotel').change(function() { var selectVal = $('#hotel :selected').val(); $("#from, #to").datepicker("option", "minDate", hotelMap[selectVal]); }); var dates = $('#from, #to').datepicker({ defaultDate: "+1w", changeMonth: true, dateFormat: 'yy-m-d', minDate: 10, numberOfMonths: 3, onSelect: function(selectedDate) { var option = this.id == "from" ? "minDate" : "maxDate"; var instance = $(this).data("datepicker"); var date = $.datepicker.parseDate(instance.settings.dateFormat || $.datepicker._defaults.dateFormat, selectedDate, instance.settings); dates.not(this).datepicker("option", option, date); } }); }); $(document).ready(check); function check(){ $('#from, #to, #hotel').bind('change', update); $('#wait').show(); } function update(){ var from=$('#from').attr('value'); var to=$('#to').attr('value'); var hotel=$('#hotel').attr('value'); $.get('get_availability.php', {from: from, to:to, hotel:hotel}, show); } function show(avail){ $('#wait').hide(); $('#availability').html(avail); }

Read the article

RMagick installation failed in Ubuntu 9.04

- by Marc Vitalis

I already installed the following: imagemagick libmagickwand-dev but still i get this error. ====================================================================== Mon 05Oct09 19:36:06 This installation of RMagick 2.12.0 is configured for Ruby 1.8.7 (i486-linux) and ImageMagick 6.4.5 Q16 ====================================================================== make cc -I. -I. -I/usr/lib/ruby/1.8/i486-linux -I. -DRUBY_EXTCONF_H=\"extconf.h\" -I/usr/include/ImageMagick -fPIC -I/usr/include/ImageMagick -fopenmp -c rmmontage.c cc -I. -I. -I/usr/lib/ruby/1.8/i486-linux -I. -DRUBY_EXTCONF_H=\"extconf.h\" -I/usr/include/ImageMagick -fPIC -I/usr/include/ImageMagick -fopenmp -c rmutil.c cc -I. -I. -I/usr/lib/ruby/1.8/i486-linux -I. -DRUBY_EXTCONF_H=\"extconf.h\" -I/usr/include/ImageMagick -fPIC -I/usr/include/ImageMagick -fopenmp -c rmmain.c cc -I. -I. -I/usr/lib/ruby/1.8/i486-linux -I. -DRUBY_EXTCONF_H=\"extconf.h\" -I/usr/include/ImageMagick -fPIC -I/usr/include/ImageMagick -fopenmp -c rmimage.c rmimage.c: In function ‘Image_function_channel’: rmimage.c:5136: error: ‘MagickFunction’ undeclared (first use in this function) rmimage.c:5136: error: (Each undeclared identifier is reported only once rmimage.c:5136: error: for each function it appears in.) rmimage.c:5136: error: expected ‘;’ before ‘function’ rmimage.c:5152: error: ‘function’ undeclared (first use in this function) rmimage.c:5158: error: ‘PolynomialFunction’ undeclared (first use in this function) rmimage.c:5164: error: ‘SinusoidFunction’ undeclared (first use in this function) make: *** [rmimage.o] Error 1

Read the article

Problem with custom Equality and GetHashCode in a mutable object

- by Shimmy

Hello! I am using Entity Framework in my application. I implemented with the partial class of an entity the IEquatable<T> interface: Partial Class Address : Implements IEquatable(Of Address) 'Other part generated Public Overloads Function Equals(ByVal other As Address) As Boolean _ Implements System.IEquatable(Of Address).Equals If ReferenceEquals(Me, other) Then Return True Return AddressId = other.AddressId End Function Public Overrides Function Equals(ByVal obj As Object) As Boolean If obj Is Nothing Then Return MyBase.Equals(obj) If TypeOf obj Is Address Then Return Equals(DirectCast(obj, Address)) Else Return False End Function Public Overrides Function GetHashCode() As Integer Return AddressId.GetHashCode End Function End Class Now in my code I use it this way: Sub Main() Using e As New CompleteKitchenEntities Dim job = e.Job.FirstOrDefault Dim address As New Address() job.Addresses.Add(address) Dim contains1 = job.Addresses.Contains(address) 'True e.SaveChanges() Dim contains2 = job.Addresses.Contains(address) 'False 'The problem is that I can't remove it: Dim removed = job.Addresses.Remoeve(address) 'False End Using End Sub Note (I checked in the debugger visualizer) that the EntityCollection class stores its entities in HashSet so it has to do with the GetHashCode function, I want it to depend on the ID so entities are compared by their IDs. The problem is that when I hit save, the ID changes from 0 to its db value. So the question is how can I have an equatable object, being properly hashed. Please help me find what's wrong in the GetHashCode function (by ID) and what can I change to make it work. Thanks a lot.

Read the article

operator overloading of stream extraction operator in C++ help

- by Crystal

I'm having some trouble overloading my stream extraction operator in C++ for a hw assignment. I'm not really sure why I am getting these compile errors since I thought I was doing it right... Here is my code: Complex.h #ifndef COMPLEX_H #define COMPLEX_H class Complex { //friend ostream &operator<<(ostream &output, const Complex &complexObj) const; public: Complex(double = 0.0, double = 0.0); // constructor Complex operator+(const Complex &) const; // addition Complex operator-(const Complex &) const; // subtraction void print() const; // output private: double real; // real part double imaginary; // imaginary part }; #endif Complex.cpp #include <iostream> #include "Complex.h" using namespace std; // Constructor Complex::Complex(double realPart, double imaginaryPart) : real(realPart), imaginary(imaginaryPart) { } // addition operator Complex Complex::operator+(const Complex &operand2) const { return Complex(real + operand2.real, imaginary + operand2.imaginary); } // subtraction operator Complex Complex::operator-(const Complex &operand2) const { return Complex(real - operand2.real, imaginary - operand2.imaginary); } // Overload << operator ostream &Complex::operator<<(ostream &output, const Complex &complexObj) const { cout << '(' << complexObj.real << ", " << complexObj.imaginary << ')'; return output; // returning output allows chaining } // display a Complex object in the form: (a, b) void Complex::print() const { cout << '(' << real << ", " << imaginary << ')'; } main.cpp #include <iostream> #include "Complex.h" using namespace std; int main() { Complex x; Complex y(4.3, 8.2); Complex z(3.3, 1.1); cout << "x: "; x.print(); cout << "\ny: "; y.print(); cout << "\nz: "; z.print(); x = y + z; cout << "\n\nx = y + z: " << endl; x.print(); cout << " = "; y.print(); cout << " + "; z.print(); x = y - z; cout << "\n\nx = y - z: " << endl; x.print(); cout << " = "; y.print(); cout << " - "; z.print(); cout << endl; } Compile erros: complex.cpp(23) : error C2039: '<<' : is not a member of 'Complex' complex.h(5) : see declaration of 'Complex' complex.cpp(24) : error C2270: '<<' : modifiers not allowed on nonmember functions complex.cpp(25) : error C2248: 'Complex::real' : cannot access private member declared in class 'Complex' complex.h(13) : see declaration of 'Complex::real' complex.h(5) : see declaration of 'Complex' complex.cpp(25) : error C2248: 'Complex::imaginary' : cannot access private member declared in class 'Complex' complex.h(14) : see declaration of 'Complex::imaginary' complex.h(5) : see declaration of 'Complex' Thanks!

Search Results

Search found 38617 results on 1545 pages for 'function declaration'.

Page 251/1545 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258 | Next Page >

- by developerit

- by Paulo Morgado

- by Renso

- by dwahlin

- by Geertjan

- by Renso

- by user69800

- by alanc

- by guillem

- by CletusLoomis

- by chandra

- by DR.GEWA

- by Shimmy

- by user281867

- by Matthew Westrik

- by ricky roy

- by Sly

- by sebastiangeiger

- by Jonah

- by Tom Julian Hume

- by Psytronic

- by Nikos

- by Marc Vitalis

- by Shimmy

- by Crystal

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258 | Next Page >