Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 251/1221 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

  • How should I set up my Hyper-V server and network topology?

    - by Daniel Waechter
    This is my first time setting up either Hyper-V or Windows 2008, so please bear with me. I am setting up a pretty decent server running Windows Server 2008 R2 to be a remote (colocated) Hyper-V host. It will be hosting Linux and Windows VMs, initially for developers to use but eventually also to do some web hosting and other tasks. Currently I have two VMs, one Windows and one Ubuntu Linux, running pretty well, and I plan to clone them for future use. Right now I'm considering the best ways to configure developer and administrator access to the server once it is moved into the colocation facility, and I'm seeking advice on that. My thought is to set up a VPN for access to certain features of the VMs on the server, but I have a few different options for going about this: Connect the server to an existing hardware firewall (an old-ish Netscreen 5-GT) that can create a VPN and map external IPs to the VMs, which will have their own IPs exposed through the virtual interface. One problem with this choice is that I'm the only one trained on the Netscreen, and its interface is a bit baroque, so others may have difficulty maintaining it. Advantage is that I already know how to do it, and I know it will do what I need. Connect the server directly to the network and configure the Windows 2008 firewall to restrict access to the VMs and set up a VPN. I haven't done this before, so it will have a learning curve, but I'm willing to learn if this option is better long-term than the Netscreen. Another advantage is that I won't have to train anyone on the Netscreen interface. Still, I'm not certain if the capabilities of the Windows software firewall as far as creating VPNs, setting up rules for external access to certain ports on the IPs of Hyper-V servers, etc. Will it be sufficient for my needs and easy enough to set up / maintain? Anything else? What are the limitations of my approaches? What are the best practices / what has worked well for you? Remember that I need to set up developer access as well as consumer access to some services. Is a VPN even the right choice?

    Read the article

  • Can I get simple name resolution on the local network without DNS, on a Mac?

    - by tim
    I've got Mantis running on a Linux VM with a Win2k8 server host. I installed Samba with the following configuration: [global] workgroup = COMPANY netbios name = MANTIS security = share Now on all our windows machines people can simple go to http://mantis, rather than http://172.16.0.20. However, this doesn't appear to work on the Mac machines. Any ideas how I can sort this without changing anything on the Windows server?

    Read the article

  • juniper j2300 console connection?

    - by Aceth
    I've been given a Juniper Networks J2300 router, but I've never used a juniper device before and no idea where to begin on how to connect to the console of the device. I have a serial to RJ45 cable but not sure on how to connect to the device. Do I use specific software or just use something like minicom (linux hyperterminal alternative)? I've had a look on the juniper website and couldn't find anything :( Any help would be truly appreciated, cheers

    Read the article

  • Routing and arp

    - by adolgarev
    If I have >ip ro 192.168.14.0/24 dev eth0 another host can obtain my mac address. But if I flush routing info: >ip ro flush table main arp resolution doesn't work. Broadcast packets "Who has 192.168.14.149" reach eth0 but OS (Linux) doesn't respond despite eth0 has address 192.168.14.149. What connection exists between routing and arp resolution?

    Read the article

  • Creating a really public Windows network share

    - by Timur Aydin
    I want to create a shared folder under Windows (actually, Windows XP, Vista, and Win 7) which can be mounted from a linux system without prompting for a username/password. But before attempting this, I first wanted to establish that this works between two Windows 7 machines. So, on machine A (The server that will hold the public share), I created a folder and set its permissions such that Everyone has read/write access. Then I visited Control Panel - Network and Sharing Center - Advanced Sharing Settings and then selected "Turn off password protected sharing". Then, on machine B (The client that wants to access the public share with no username/password prompt), I tried to "map network driver" and I was immediately prompted by a password prompt. Some search on google suggested changing "Acconts: Limit local account use of blank passwords to console logon only" to "Disabled". Tried that, no luck, still getting username/password prompt. If I enter the username/password, I am not prompted for it again and can use the share as long as the session is active. But still, I really need to access the share without any username/password transaction whatsoever and this is not just a convenience related thing. Here is the actual reason: The device that will access this windows network share is an embedded system running uclinux. It will mount this share locally and then play media files. Its only user interface is a javascript based web page. So, if there is going to be any username/password transaction, I would have to ask the user to enter them over the web page, which will be ridiculously insecure and completely exposed to packet sniffing. After hours of doing experiments, I have found one way to make this happen, but I am not really very fond of it... I first create a new user (shareuser) and give it a password (sharepass). Then I open Group Policy Editor and set "Deny log on locally" to "A\shareuser". Then, I create a folder on A and share it so that shareuser has Read access to it. This way, shareuser cannot login to A, but can access the shared folder. And, if someone discovers the shareuser/sharepass through network sniffing, they can just access the shared folder, but can't logon to A. The same thing can be achieved by enabling the Guest user and then going to Group Policy Editor and deleting the "Guest" from the "Deny access to this computer from the network" setting. Again, Guest can mount the public share, but logging in to A as Guest won't be possible, because Guest is already not allowed to log in by default. So my question would be, how can I create a network share that is truly public, so that it can be mounted from a linux machine without requiring a password? Sorry for the long question, but I wanted to explain the reason for really needing this...

    Read the article

  • Assign a secondary IP address to a Windows machine using DHCP

    - by IndigoFire
    Is it possible to configure dhcpd (on a Linux box) to assign a Windows PC 2 separate IP configurations? Right now I've configured the two IP addresses manually and it does exactly what's needed, but I can't figure out how to achieve the same thing with DHCP. For example, is it possible to set up a virtual interface that piggy-backs onto the first interface and gets its own configuration? Alternatively, is it possible to run a script upon getting IP values from DHCP that would then be able to configure the secondary IP?

    Read the article

  • What are the different ways of remotely connecting to your computer?

    - by Rogue
    I'll be leaving for uni soon and would like to know the different methods of connecting remotely to my home pc. I know about VPN but are there any other ways? Also how secure is each of this method as I wouldn't want snoopers on my home-pc especially when I'm away. Also can i set up a remote connection to start and shut down my computer My operating system is windows, but if linux is more secure i would be willing to switch.

    Read the article

  • Auditing bandwidth of remote sites

    - by keithosu
    I would like to do an automatic audit of bandwidth of my remote offices. I understand that there are many websites where I could ask each user to go to a webpage and run the test. I was hoping there was some software that I could run on our web server and a script that I could send out that would run the test and record the results to a central web interface. The remote sites are all running some form of Windows and the server environment can be Linux or Windows based.

    Read the article

  • Ubuntu Control Center Makes Using Ubuntu Easier

    - by Vivek
    Users who are new to Ubuntu might find it somewhat difficult to configure. Today we take a look at using Ubuntu Control Center which makes managing different aspects of the system easier. About Ubuntu Control Center A lot of utilities and software has been written to work with Ubuntu. Ubuntu Control Center is one such cool utility which makes it easy for configuring Ubuntu. The following is a brief description of Ubuntu Control Center: Ubuntu Control Center or UCC is an application inspired by Mandriva Control Center and aims to centralize and organize in a simple and intuitive form the main configuration tools for Ubuntu distribution. UCC uses all the native applications already bundled with Ubuntu, but it also utilize some third-party apps like “Hardinfo”, “Boot-up Manager”, “GuFW” and “Font-Manager”. Ubuntu Control Center Here we look at installation and use of Ubuntu Control Center in Ubuntu 10.04. First we have to satisfy some dependencies. You will need to install Font-Manager and jstest-gtk (link below)…before installing Ubuntu Control Center (UCC). Click the Install Package button. You’ll be prompted to enter in your admin password for each installation package. Installation is successful…close out of the screen. Download and install Font-Manager…again you’ll need to enter in your password to complete installation.   Once you have installed the two dependencies, you are all set to install Ubuntu Control Center (link below), double click the downloaded Ubuntu Control Center deb file to install it. Once installed you can find it under Applications \ System Tools \ UCC. Once you launch it you can start managing your system, software, hardware, and more.   You can easily control various aspects of your Ubuntu System using Ubuntu Control Center. Here we look at configuring the firewall under Network and Internet.     UCC allows easy access for configuring several aspects of your system. Once you install UCC you’ll see how easy it is to configure your Ubuntu system through an intuitive clean graphical interface. If you’re new to Ubuntu, using UCC can help you in setting up your system how you like in a user friendly way. Home Page of UCC http://code.google.com/p/ucc/ Links Download Font-Manager ManagerDownload jstest-gtkUbuntu Control Center (UCC) Similar Articles Productive Geek Tips Adding extra Repositories on UbuntuAllow Remote Control To Your Desktop On UbuntuAssign a Hotkey to Open a Terminal Window in UbuntuInstall VMware Tools on Ubuntu Edgy EftInstall Monodevelop on Ubuntu Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium

    Read the article

  • Use Any Folder For Your Ubuntu Desktop (Even a Dropbox Folder)

    - by Trevor Bekolay
    By default, Ubuntu creates a folder called Desktop in your home directory that gets displayed on your desktop. What if you want to use something else, like your Dropbox folder? Here we look at how to use any folder for your desktop. Not only can you change your desktop folder, you can change the location of any other folder Ubuntu creates for you in your home folder, like Documents or Music – and this works in any Linux distribution using the Gnome desktop manager. In this example, we’re going to change desktop to show our Dropbox folder. Open your home folder in a File Browser by clicking on Places > Home Folder. In the Home Folder, open the .config folder. By default, .config is hidden, so you may have to show hidden folders (temporarily) by clicking on View > Show Hidden Files. Then open the .config folder by double-clicking on it. Now open the user-dirs.dirs file… If double-clicking on it does not open it in a text editor, right-click on it and choose Open with Other Application… and find a text editor like Gedit. Change the entry associated with XDG_DESKTOP_DIR to the folder you want to be shown as your desktop. In our case, this is $HOME/Dropbox. Note: The “~” shortcut for the home directory won’t work in this file (use $HOME for that), but an absolute path (i.e. a path starting with “/”) will work. Feel free to change the locations of the other folders as well. Save and close user-dirs.dirs. At this point you can either log off and then log back on to get your desktop back, or open a terminal window Applications > Accessories > Terminal and enter: killall nautilus Nautilus (the file manager in Gnome) will restart itself and display your newly chosen folder as the desktop! This is a cool trick to use any folder for your Ubuntu desktop. What did you use as your desktop folder? Let us know in the comments! Similar Articles Productive Geek Tips Sync Your Pidgin Profile Across Multiple PCs with DropboxAdd "My Dropbox" to Your Windows 7 Start MenuCreate a Keyboard Shortcut to Access Hidden Desktop Icons and FilesAdd "My Computer" to Your Windows 7 / Vista TaskbarCheck your Disk Usage on Ubuntu with Disk Usage Analyzer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative

    Read the article

  • Windows 7 intermittently drops wired internet/lan connection.

    - by CraigTP
    In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

    Read the article

  • one way routing

    - by user101531
    I have two computers connected with VPN, and some virtual machines on each. I want everything to see each other (that is basically 4 different networked machines). What I've not managed so far is that a computer on the one end to be visible to the other end. In tracert terms: 192.168.78.42>tracert 192.168.69.18 Tracing route to WIN-2K8R2 [192.168.69.18] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.78.17 2 * * * Request timed out. 3 217 ms 78 ms 78 ms WIN-2K8R2 [192.168.69.18] Trace complete. 192.168.78.42>tracert 192.168.69.112 Tracing route to 192.168.69.112 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.78.17 2 333 ms * 337 ms WIN-2K8R2 [192.168.86.22] 3/4/5 * * * Request timed out. 6 ^C 192.168.69.18>tracert 192.168.69.112 Tracing route to 192.168.69.112 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.69.112 Trace complete. 192.168.69.112>tracert 192.168.78.42 Tracing route to 192.168.78.42 over a maximum of 30 hops 1 1 ms * <1 ms 192.168.69.18 2 79 ms 77 ms 80 ms 192.168.86.21 3 80 ms 77 ms 81 ms 192.168.78.42 Trace complete. Note: the 4 machines are 192.168.69.112 (winXP), 192.168.69.18=192.168.86.22 (win2K8R2), 192.168.86.21=192.168.78.17 (Linux), 192.168.78.42 (win2K3). The VPN is a TAP openvpn connection between 192.168.86.21 and 192.168.86.22. I would say that the problem is in the win2K8 machine, but Windows networking is my weak point.

    Read the article

  • apache vhost not working consistently

    - by petrus
    I have a vhost on my webserver whose sole and unique goal is to return the client IP adress: petrus@bzn:~$ cat /home/vhosts/domain.org/index.php <?php echo $_SERVER['REMOTE_ADDR']; echo "\n" ?> This helps me troubleshoot networking issues, especially when NAT is involved. As such, I don't always have domain name resolution and this service needs to work even if queried by its IP address. I'm using it this way: petrus@hive:~$ echo "GET /" | nc 88.191.124.41 80 191.51.4.55 petrus@hive:~$ echo "GET /" | nc domain.org 80 191.51.4.55 router#more http://88.191.124.41/index.php 88.191.124.254 However I found that it wasn't working from at least a computer: petrus@seth:~$ echo "GET /" | nc domain.org 80 petrus@seth:~$ petrus@seth:~$ echo "GET /" | nc 88.191.124.41 80 petrus@seth:~$ What I checked: This is not related to ipv6: petrus@seth:~$ echo "GET /" | nc -4 ydct.org 80 petrus@seth:~$ petrus@hive:~$ echo "GET /" | nc ydct.org 80 2a01:e35:ee8c:180:21c:77ff:fe30:9e36 netcat version is the same (except platform, i386 vs x64): petrus@seth:~$ type nc nc est haché (/bin/nc) petrus@seth:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@seth:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2010-06-26 14:01 /etc/alternatives/nc -> /bin/nc.openbsd petrus@hive:~$ type nc nc est haché (/bin/nc) petrus@hive:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@hive:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2011-05-26 01:23 /etc/alternatives/nc -> /bin/nc.openbsd It works when used without the pipe: petrus@seth:~$ nc domain.org 80 GET / 2a01:e35:ee8c:180:221:85ff:fe96:e485 And the piping works at least with a test service (netcat listening on 1234/tcp and output to stdout) petrus@bzn:~$ nc -l -p 1234 GET / petrus@bzn:~$ petrus@seth:~$ echo "GET /" | nc domain.org 1234 petrus@seth:~$ I don't know if this issue is more related to netcat or Apache, but I'd appreciate any pointers to troubleshoot this issue ! The IP addresses have been modified but kept consistent for easy reading. bzn is the server, hive is a working client and seth is the client on which I have the issue.

    Read the article

  • Setting up a network e-mail server

    - by Jason
    Hello, My boss just asked me to buy a new server for our office network. I know next to nothing about servers and networking, so I need someone to point me in the right direction. He said he wants this to be our e-mail server with a network login. I have no idea how to set up an e-mail server, especially one that sends/receives e-mail using our domain name. We use a terrible piece of order/inventory software called Mail Order Manager (MOM). Our computers currently connect to the MOM database through a networked drive. My boss would like to move away from this peer-to-peer MOM setup. The software publisher offers a SQL version of MOM, but it's way overpriced. Is there a better way to connect to these databases without using the SQL version? Finally, the server needs to be running Windows. Does this question make sense, is it possible, and can someone help me get started? Thanks!

    Read the article

  • My computer loses network connectivity every 30 minutes

    - by Logan Garland
    My LAN connected PC loses network connectivity every 30 minutes. It has a static IP address and I've checked to make sure there aren't any IP conflicts on my network. If I'm streaming from that PC to my Xbox the stream will be interrupted and it normally takes about a minute to come back online. The same happens if I'm actually on the PC and just browsing the web. I'm looking for suggestions on how to track down this issue. I've tried checking the available logs on my router to see if there is an issue with DCHP but have been unsuccessful in finding any evidence. Any suggestions would be helpful. I can't think of any recent changes to my network, PC or software installations that may have caused this. I am a software developer and have intermediate networking knowledge. EDIT: During one outage I told windows to troubleshoot the network problem and it said that it could automatically fix the problem by changing DCHP info. It basically said my network adapter from static to automatically obtain. This did fix the issue quicker than just waiting it out, but the outage occurred again 30 minutes later even when leaving those settings.

    Read the article

  • Wifi network undetectable on a Lenovo G470

    - by Rex
    I have a WPA2 secured network with a visible SSID at home that works perfectly fine with a Dell laptop,a HP netbook and sundry mobile phones. When I try connecting my sister's Lenovo G470, it refuses to detect the wifi network no matter what, but shows up the neighbors' networks. The Lenovo also works correctly at her office. Both laptops run Windows 7. Already tried/checked the following: Manually configure wifi network settings (copied over from the Dell) Ensure there is no MAC address filtering on the router. Ensure router DHCP server is not running out of addresses to assign (I have set it to allocate upto 10). Reboot laptop, router etc. Is this a known problem, and is there anything else one could try? Update - The problematic Lenovo uses Windows 7 Home Basic while the Dell that works uses Home Premium and the HP netbook uses Starter edition - if that makes any difference. Further update - It is able to connect if I reboot into safe mode with networking. However in 'normal' mode it shows up the network sporadically, and then says there was an error connecting to it. All the network parameters, password, encryption, etc etc are EXACTLY the same as they are on the Dell.

    Read the article

  • Leopard Network Shares and browsing are unreliable

    - by EvilChookie
    I have two macs, running Leopard 10.5.8. One is the 13" MBP connected via WiFi, and the other is a 24" 2008 iMac, connected via ethernet. There are at least another 6-10 machines (windows and mac) awake on the network (with shares) at any given time, yet there are plenty of times where I cannot see any devices/shares in either my "Shared" section in Finder, nor can I see any computers in "Network" in Finder. Restarting doesn't help. I've restarted all the networking gear in the house to no avail. Our network is a series of gigabit switches connected to a D-Link gaming router. I believe we use OpenDNS, and our provider is Cox. I hate having to use "Go - Connect to Server" to browse to commonly used file shares (by IP). I'd like to know why my shares do not always and consistently appear in Leopard. Edit: I ran OnyX this morning, and performed the cleaning and maintenance operations (including disk permissions) on both my Macs, and at least one of my macs has started showing network devices again. (the other is still going). No idea how long this will last. Any ideas as to what is causing this issue, and how to prevent it? Edit 2: Aaaand there the shares go again. So running OnyX is not a permanent or reliable fix for this issue. Edit 3: After a clean reinstall and update, network shares are still unreliable. The SMBClient command mentioned in comments shows me the information it's supposed to show, but the shares do not appear in the shared section. They'll also vanish at random and reappear at random throughout the day.

    Read the article

  • client flips between internal and external IP addresses??

    - by jmiller-miramontes
    I have what seems like a not-particularly-complicated home network, all things considered: a DSL line comes in to a modem/router, which goes off to a switch, which supports a bunch of machines. My machines live in a 192.168.0.x address space; however, I'm running some public servers on the network, so I have a block of 8 (5, really) static IP addresses that are mapped to the servers by the router. The non-servers get 192.168.0.x addresses via NAT; some machines have static addresses and some get addresses from DHCP. Locally, I'm running a DNS server (named) to map between the domain names and the 192.168 address space. Somewhat messy, but everything basically works. Except: One of my local non-server clients occasionally switches from its internal address to its external address. That is, if I check the logs of a website I'm running internally, the hits coming from this client sometimes show up with the internal 192.168 address, and sometimes with the external (216.103...) address. It will flip back and forth for no apparent reason, without my doing anything. This can be a problem in terms of how the clients interact with the way I have some of the clients' SSH systems configured (e.g., allowing access from the internal network but not the external network), but it also Just Seems Wrong. I will confess that I'm kinda skating on the very edge of my networking competence here, but I can't for the life of me figure out what's going on. If it helps, the client in question is running Mac OS X / 10.6; its address is statically assigned, is not one of the five externally-accessible addresses, and gets its DNS from (first) the internal DNS server and (second) my ISP's DNS servers. I can't swear that none of the other NAT clients are also showing this problem; the one I'm dealing with is my everyday machine, so this is where I run into it. Does anybody out there have any advice? This is driving me crazy...

    Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >