Search Results

Search found 8902 results on 357 pages for 'hardware virtualization'.

Page 253/357 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

• Windows 7 upgrade advisor issue

  - by Groo

  I am preparing to migrate a pretty old XP machine to Windows 7. I ran the Windows 7 Upgrade Advisor and got a couple of smaller issues (low 512Mb RAM complaints and similar stuff). Apart from that, everything else was shown as compatible, including my old ATI Radeon 9550/X1050 card: ATI Radeon 9550/X1550 Series: This device is compatible with Windows 7. The thing that concerns me is that people around the web seem to be unable to actually find a Windows 7 driver for this card. Even the ATI web page states that this is a legacy device: If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7. [...] Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD [...] Should I trust the Advisor and continue with the update? Does this mean Microsoft will provide at least a generic driver which will allow hardware acceleration with this card?

  Read the article

• CentOS send mail with external SMTP server and without local daemons

  - by Vilx-

  I've got a little old server with CentOS 6.5 on it. The hardware is old and crappy, but enough for what it has to do. Which consists of SSH (+SFTP), Apache, PHP and MySQL. Still, I'm trying to cut away all that I can. One thing that it does not need to do is to be an SMTP server. There are no mailboxes on it and nobody will ever route mail through it. However I do want it to send me an email when something goes wrong. Also, the webpages will send emails from PHP. So that brings me to the question - can I set up the mail system in such a way that there isn't an expensive mailer daemon sitting in the background with queues and whatnotelse, but rather every email is directly and immediately delivered to an external SMTP server? And how do I go about it?

  Read the article

• Can I take a HDD in Raid1 and plug it straight into a different machine?

  - by jacko

  I would assume that I can just take my HDD out of my NAS (in raid1 mirror) and plug it into another enclosure and have it work off the bat but I'd like to make sure... Any ideas? Edit: My current setup is a Netgear ReadyNAS in (hardware) raid1. I'm hoping to replace this with a home theatre type PC (possibly running Ubuntu), and would like to migrate my data without having to do a bulk transfer over my network between the 2 machines. Can anyone confirm the case for the Netgear ReadyNAS?

  Read the article

• Why some recovery tools are still able to find deleted files after I purge Recycle Bin, defrag the disk and zero-fill free space?

  - by Ivan

  As far as I understand, when I delete (without using Recycle Bin) a file, its record is removed from the file system table of contents (FAT/MFT/etc...) but the values of the disk sectors which were occupied by the file remain intact until these sectors are reused to write something else. When I use some sort of erased files recovery tool, it reads those sectors directly and tries to build up the original file. In this case, what I can't understand is why recovery tools are still able to find deleted files (with reduced chance of rebuilding them though) after I defragment the drive and overwrite all the free space with zeros. Can you explain this? I thought zero-overwritten deleted files can be only found by means of some special forensic lab magnetic scan hardware and those complex wiping algorithms (overwriting free space multiple times with random and non-random patterns) only make sense to prevent such a physical scan to succeed, but practically it seems that plain zero-fill is not enough to wipe all the tracks of deleted files. How can this be?

  Read the article

• Still no external sound after installing ubuntu 10.04

  - by Walter

  As suggested I upgraded. Same as before except now not even the speaker control in the application bar. Please help. Background: I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System Administration Hardware Drivers; the only driver listed is my graphics card. Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.

  Read the article

• Raid recovery in gigabyte GA-8I945 Pro

  - by epeleg

  This was a working machine until a few days ago. And now it won't boot into the OS, during startup if makes clicking sounds (I think from one of the drives). Installed OS: Windows 2003 Web edition Hardware: Gigabyte GA-8I945P Pro , 2*160G Sata in RAID1 configuration , 2 Volumes – 25G and the rest. When I installed windows on it, during setup, I pressed F6 and used ICH7DH drivers of RAID. The manual for the MOBO says: Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS setup utility. But the machine never shows this message. BIOS SATA RAID/AHCI Mode is set to RAID. Any ideas or pointers on what I can do to recover my data? Thanks

  Read the article

• Windows Proxy Server advice

  - by Scott

  I have a webserver that currently has about 10 IP addresses. I have various clients that require a proxy server to route their internal traffic through. The load is not that great, so I'd like to have this ONE server act as a proxy server for 10 different clients, each client having their own unique IP on the server. The hardware is already setup, but I'm wondering what software solutions you guys recommend? I've looked at WinGate, Squid-Proxy, etc...but am pretty green with this. Maybe there's even a way to have Windows do this natively? I'm running Windows Server 2008, 32 bit.

  Read the article

• some keyboard keys not working properly

  - by surfmadpig

  I'm using Windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

  Read the article

• kernel warning disk error for command write - solaris svm

  - by help_me

  Recently this warning came up on my message logs, scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): Oct 27 00:14:44 Error for Command: write(10) Error Level:Retryable Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Requested Block: 101515828 Error Block: 101515828 Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0441B9B5H Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Sense Key: Hardware Error Oct 27 00:14:44 scsi: [ID 107833 kern.notice] ASC: 0x19 (defect list error), ASCQ: 0x0, FRU: 0x2 This is showing signs of disk failing in my opinion. I have not seen the messages re-occurring. This is on a Solaris 9 Sparc system V240. The disks are managed by SVM and "metadb" is showing the flags as "a" Are there any tests or indications as to check/see if the disk is actually failing or was that error message initiated by something else. Thank you!

  Read the article

• Using video ports 'backwards'

  - by ACarter

  If I want to connect my laptop, which has a VGA output, to a monitor, I plug a VGA cable into both ends. The output being my laptop, and the input the monitor VGA output sockets are the same as VGA input sockets however, so what if I want to use my laptop as the monitor, with the video being outputted from somewhere else? As I said, VGA's output is the same as input, so in theory, I have the hardware in my laptop to do this. But presumably I need some software. So can I use the VGA port on a laptop as a video input? (And also, can this be done with HDMI?)

  Read the article

• Can you set up a gaming LAN using OpenVPN installed in a VMware guest OS and be playing the game on the host OS?

  - by Coder

  I would like to setup a gaming VPN. Ie. I have some games that work over LAN and would like to play them with people that are not on my LAN. I know I can do this with OpenVPN. My ultimate goal would be to run OpenVPN portably on my host OS and not even need any virtualization. As such i don't want to install it on my host, but i'm fine with running it portably. I'm even fine with temporarily adding registry keys, and then running a .reg file to remove these entries once i'm done. To this effect i have installed OpenVPN on a virtual machine and diffed the registry. I then manually (using a .reg file) added all the keys that seem important on my host OS and copied the installation folder of OpenVPN onto my host machine. Then i try to run openVPN GUI 1.0.3 as a test and it says "Error opening registy for reading (HKLM\SOFTWARE\OpenVPN). OpenVPN is probably not installed". I verified that that key is indeed in the registry with all subkeys and it looks correct. I have tried running the GUI as an administrator and in compatibility mode with no success. I am running Windows 7. If this fails then i would be happy with installing OpenVPN on a virtual machine in VMWare but they key is that i will be running the game installed on my host machine. The first question for this option is if this is even possible. The second is, that I can't get the VM to have internet access if I use bridging but i can if i use NAT. Is it possible to do this game VPN setup with VMWare guest OS running using NAT? Summary of questions: -Is it possible to run openVPN portably and if so what did i miss above? -If it's not possible to run it portably, then can setup a gaming LAN by installing OpenVPN in a guest OS with NAT and how can i do this? -If the above is not possible then can i install OpenVPN in a guest using bridging and if so how can i set this up with a Windows 7 host and Windows XP guest as currently i can't get the guest to be able to access the internet in bridging mode, but it working in NAT mode. -In general is there any good documentation on setting up a gaming LAN with OpenVPN (i am using 2.1.4) as i have never set up a VPN of any sort before so any help would be much appreciated. Thanks!

  Read the article

• Filtering serial port io

  - by mr odus

  I am currently working on a project where I communicate with hardware via a com port on its respective pc(win xp or 7) It is a fairly large project and sifting through the log file can be a bit of pain. This is my current setup. I use putty to do the actual serial communication, and write it to a log file. Then using MinGW Msys I filter it using tail -f "puttyLog" | grep -i "search term" Is there a better way to do this? I mean specifically filtering the input in realtime. Not that mine is terrible, but it still involves having to read from a log and sometimes there have been hangups where it will be delayed for a minute or 2. I have used software in the past with a main io window and then internal filter panels, but can no longer remember or find it.

  Read the article

• end_request: I/O error, dev sda, sector xxxxxxxxx

  - by muruga

  I have a IBM server. This server contains 3 hard disk with RAID 5. It was working fine earlier. Unfortunately this machine got the following error message. After that I have rebooted the systems. After that I am getting the following error message in kern.log and demsg kernel: [65896.678870] end_request: I/O error, dev sda, sector 17430271 kernel: [69263.783957] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK : [69263.783957] sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] kernel: [69263.783957] sd 0:0:0:0: [sda] Add. Sense: Internal target failure Whether it is kernel problem or hard disk problem or Raid problem

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• Text template or tool for documentation of computer configurations

  - by mjustin

  I regularly write and update technical documentation which will be used to set up a new virtual machine, or to have a lookup for system dependencies in networks with around 20-50 (server-side) computers. At the moment I use OpenOffice Writer with text tables, and create one document per intranet domain. To improve this documentation, I would like to collect some examples to identify areas where my documents can be improved, regarding general structure and content, to make it easy to read and use not only for me but also for technical staff, helpdesk etc. Are there simple text templates (for example for OpenOffice Writer) or tools (maybe database-driven) for structured documentation of a computer configuration? Such a template / tool should provide required and optional configuration sections, like 'operating system', 'installed services', 'mapped network drives', 'scheduled tasks', 'remote servers', 'logon user account', 'firewall settings', 'hard disk size' ... It is not so much low-level hardware docs but more infrastructure / integration information in these documents (no BIOS settings, MAC addresses).

  Read the article

• Enable System Beep in Ubuntu

  - by Melissa W

  I have tried and tried to get the system beep working, but with no success. I have selected System--Sound--System Beep--Enable Audible Beep (from the Gnome Desktop) I have tried from a Terminal window Edit--General Tab--Selecting terminal bell checkbox I have tried entering modprobe pcspkr at the command line. Trying echo -e '\a' or using the beep application - Nothing works! I know my hardware speaker works, because if on startup the battery is low it will beep. Update: It is a laptop computer. It is an IBM Thinkpad, iSeries. I did look at the modprobe blacklist, and pcspkr was not listed.

  Read the article

• Transfer Raid Drives to External Enclosure

  - by dubbeat

  I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

  Read the article

• Is there a limit on the number of USB external drives?

  - by Beska

  I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

  Read the article

• How to make a quiet laptop?

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be PDF/docs processing, real-time audio processing, web-surfing and Skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend any solution please?

  Read the article

• SAS disk performance drops a while after reboot.

  - by Flamewires

  So we have some workstations with identical hardware. The Fedora14 box has a couple weeks uptime and still get good performance. hdparm -tT /dev/sda /dev/sda: Timing cached reads: 21766 MB in 2.00 seconds = 10902.12 MB/sec Timing buffered disk reads: 586 MB in 3.00 seconds = 195.20 MB/sec The Cent 5.5 boxes however seem to be okay after a reboot, /dev/sda: Timing cached reads: 34636 MB in 2.00 seconds = 17354.64 MB/sec Timing buffered disk reads: 498 MB in 3.01 seconds = 165.62 MB/sec but some time later( unsure exactly, tested at approx 1 day uptime) /dev/sda: Timing cached reads: 2132 MB in 2.00 seconds = 1064.96 MB/sec Timing buffered disk reads: 160 MB in 3.01 seconds = 53.16 MB/sec drop to this. This is with very low load. I believe they all have the same bios settings. Any ideas what could cause this on Cent? Ask for more info. It might also be worth noting, that passing the --direct flag causes the slow boxes to perform similarly to the non-slow ones for buffered disk reads.

  Read the article

• Mouse wheel does not work in Excel 2007

  - by Chris Noe

  I am running Office 2007 on Windows XP-SP3. My mouse wheel works fine in other applications, meaning that it scrolls information up and down when the mouse is positioned over a given panel. It's even working fine in the other Office 2007 apps, so this is not a hardware or driver problem. It doesn't help to click on a cell to give the worksheet focus. I've tried various Advanced options that people recommend, to no avail: Allow editing directly in cell Zoom on roll with IntelliMouse What the heck, has Microsoft disabled this most useful functionality?

  Read the article

• Tracking costs within one AWS account

  - by caius howcroft

  I have what I'm sure is a very common problem. Our company has many projects and groups working for different clients. We do a lot of our development work in the cloud and deploy our solutions there. We have a VPC set up that isolates projects from each other in their own subnet and that VPC is getting a hardware VPN connection back to HQ. We need to keep track of the cost run up by every project. The way I currently implement this is by providing my own tools for starting and stopping instances which log which user (and thus which project) to bill the instance too. This works okay for BoxUsage costs but not for other costs. I could create a separate account for each project and use consolidated billing, this I think would allow me to pay once but track costs per "project", but I would then not be able to share common resources (like bring account B's running instances inside the same VPC). Does anyone have any suggestions? Cheers C

  Read the article

• Default Webcam Driver Issues

  - by Omegaclawe

  I'm having troubles getting my monitor-attached webcam (ASUS VK248H) to install on my new computer. On the old computer, it was a matter of not using a USB 3.0 port, but I can't get anything to work on the new one. I have tried all manner of uninstalling/reinstalling the driver and resetting the computer, as well as literally every USB port on the computer (14 in total). It's not that windows isn't recognizing the device; it most certainly is. However, comparing it to the old computer's driver details, on the new computer, it is not using the ksthunk.sys driver in addition to the usbvideo.sys driver, like on the old (working) computer. Naturally, I figured the way ahead was to simply get this other driver to work with the hardware, but haven't really found out a way to do that. Does anyone know of a way I can force it to use ksthunk.sys? It seems rather difficult to get it to install anything when Windows is feeling that everything is peachy.

  Read the article

• Why such a dramatic difference in wireless router max. simultaneous connections?

  - by Jez

  Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

  Read the article

• How can I combine non-identical disks efficiently?

  - by Odys

  There are some not-identical disk of various capacities that I want to combine (somehow). Since there are no duplicate models, I can't use raid between none of them. Is there a way to use them efficiently while being safe? What I have in mind is a software that will use them as if it were Raid-5 or something. I really don't care about max speed. I want in the end to have as less logical drives as possible. Also, I don't mind spending some money on hardware, if needed.

  Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >