Search Results

Search found 8902 results on 357 pages for 'hardware virtualization'.

Page 249/357 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

• TextMate - completion using an external file or file contained in project?

  - by Neil Baldwin

  Does anyone know how to get TextMate to search an external file (or even the files contained in a TextMate "project") with which to perform word completion? I'm coding some stuff on the C64 (using TextMate to write the code) and I have an external file containing labels for all of the hardware registers/kernal routines e.g VIC2InteruptStatus = $D019 It would be really handy to be able to type, say, 'VIC2I' then press the key for word completion and have TextMate find matches in the external library file. Rather than how I'm having to do it at the moment by opening the library file and copy-paste the register names into my code.

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• Is there no such thing as a Gigabit switch?

  - by Torben Gundtofte-Bruun

  According to the manufacturer specification, even my rather plain desktop computer has "Gigabit Ethernet". So when I want to copy large files over the LAN (not Internet) it would make sense to have a gigabit switch. I'm searching eBay for a gigabit switch for a planned home network upgrade. The products I find are all labeled "gigabit" but they all have 24 x 10/100Mbit autosensing ports and sometimes 2 x 10/100/1000Mbit autosensing ports. It was my understanding that 10/100 is ancient and that modern computers have network interfaces that work with 1000Mbit, so it would make sense to get a switch that has 24 x 1000Mbit ports. Did I misunderstand, or are sellers (deliberately?) mislabeling older hardware? (Let's not dive into wired vs. wireless networks and how "N" wireless is fast. You'd be right, but not answering the question.)

  Read the article

• How to play games in widescreen in Windows 7, Dell Studio 1555

  - by blasteralfred

  I have a dell studio 1555 laptop with a GPU inside. The details are below; Hardware details Software details I can play games in widescreen in Vista, but not in 7. I am using Windows 7 Home Premium. I have the latest Catalyst Control Center. Instead of widescreen, the games are running in a classic style, say 1024x768 ratio. When I play need for speed underground, the maximum possible resolution is 1024x768 (all other games are like this). I have no problem with HD videos and anything else. How can I fix this? Thanks in advance...:)

  Read the article

• Security tips for adding wireless AP to domain network?

  - by Cy

  I am researching best-practices for adding wireless to our existing domain network. My DHCP server is running Windows Server 03 Standard (not sure if thats useful). I am familiar with simple home networking but I thought I'd get some expert advice for the more advanced stuff. Any tips and / or best-practices? Is this Cisco Wireless Access Point a good option? Are there any additional hardware recommendations? Thank you in advance for your help.

  Read the article

• Why does my screen dim on a desktop installation of Windows 7?

  - by Robert Cartaino

  Periodically, while using my Windows 7 Pro desktop installation, the screen suddenly dims. The brightness is about 75% normal (estimate). It's as if I am in a power-saving mode on a laptop running on batteries. But this is a full desktop installation. I know it is not a hardware glitch or monitor adjustment issue because the Windows cursor is still bright white while everything else goes dim. The Control Panel Power Options have not been changed. They are set to "Balanced [active]" and I have tried restoring the default settings. Flipping through the power and display settings, everything looks "normal." There is no screen saver or power-off-after settings apparent. Rebooting the system resets everything to full brightness but I can't find a way to restore it in Windows or to keep it from happening in the first place. Suggestions?

  Read the article

• MBP becomes very hot after using Xcode

  - by Globalhawk

  Hardware: MBP early 2011 version OS: Mountain lion App: Xcode 4.5.2 Problem: Every time when I start Xcode, 2 or 3 processes called "git" start running. But when I quit Xcode the "git" process won't quit and are still using a lot of CPU. Then the computer becomes quite hot and the battery gets drained very quickly. If I manually kill these processes the problem is gone. I tried to reinstall Xcode several times but the problem comes back every time. It drives me crazy. Any help will be appreciated!

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• Mongodump on Gridfs is killing the host IOs

  - by Raphael

  I'm trying to make a mongodump from our production mongodb while the production is running. We have three production instances, one regular mongodb, one with very few gb of data on gridfs, one with a larger amount of data on gridfs. All mongodb instances are running in version 2.4.9 on a ubuntu 10.04 virtual server. I use a mongodump command to export the bases to another server. Unfortunately our machines are virtually hosted in a "low performances" datacenter (vmware based) so when I try to export the large gridfs db, the disk IO hits 100% (and 50% of the cpu starts waiting for IO too). This has a very negative impact on the production applicatiosn because db access time is excessively increased, making the applications unusable. I'm looking for a way to regulate the mongodump so the export goes slower but cooler on the hardware ressources allowing better performances for the applications to run. Has anyone had a similar scenario ?

  Read the article

• Dual-WAN router

  - by aix

  I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

  Read the article

• Quad Core host with hyper-threading, how many processors to configure in VirtualBox?

  - by Anthony

  I have a quad-core i7 processor with hyperthreading (8 logical cores), when I configured a virtual machine to use 8 processors, VirtualBox gave me a warning saying that I only have four cores (which is true) and that this may cause a performance issue. But hyper-threading is a hardware feature, so the OS sees 8 cores and it sends instructions to all 8. What if setting it to 4 caused the VM to use 2 cores (4 threads) instead of 4 simultaneous threads (on all 4 cores)? Does the warning I got take into account that my machine has hyper-threading?

  Read the article

• MSTSC Not working, disconnects shortly after connecting

  - by F4r-20

  I'm currently having a problem connecting remotely to a server. It is a brand new build Windows 2008 R2, remote users are enabled. I'm trying to connect from a Windows 7 machine. Everytime I remotely connect to the server it will stay connected for a matter of seconds (maybe 3-5) and then disconnect and I get the standard old cannot connect and list of reasons it could be. Then I cannot connect again and get this prompt until I restart the server. As soon as it's finished restarting, it happens all over again. The network and hardware configuration between the two machines is completely reliable. Does anybody know what else I could try? Thanks.

  Read the article

• TV video constantly skips 1/2 second, plays 1 second; green on bottom

  - by Robert

  I just got DirecTV. It worked for a day, but now the TV video constantly skips 1/2 second, then plays 1 second. Also, the bottom 5th of the screen is solid green. The audio does not skip. I tried to do "Set up TV signal" (in Media Center) - but I get an error. See the post I just made here titled "Error - “IR Hardware not detected” - but it’s installed/working." Thanks for your help.

  Read the article

• Is there a way to enable metro on a 1024x600 netbook?

  - by scatmoi

  Windows 8 Consumer Preview works great on my 1024x600 netbook but, for some strange reason, Microsoft decided to provide its Metro interface only to 1024x768 and up screens. "Strange" because Android can work with as little as 240x320 screens, and I know that Microsoft is presumably targeting smartphones, too, in its upcoming Windows 8. The interface itself is there with all the panels etc. but when one of the rectangles is pressed, Windows 8 just refuses to launch any application (even Internet Explorer), except for Windows Explorer. Looks to me like this isn't a real hardware limitation but some arbitrary flag set in the registry. Is there any way or tweak to enable the Metro interface on 1024x600 screen?

  Read the article

• How to make phone calls using a pc, modem, headphone and no actual phone instrument

  - by user18151

  Hi, I have a phone landline connection and I DO NOT have a phone instrument. I connect the cable into my laptop, and want to make calls using my laptop. I have an HDA CX20561 modem. I seem to be able to dial number using dialer.exe, though nothing seems to happen. From Microsoft kb http://support.microsoft.com/kb/958143, it looks like dialer.exe alone is not enough for the call. Can somebody tell me how to make and receive phone call with whatever hardware I have, i.e. what software will I need. Thanks.

  Read the article

• Where should I go to learn about networking? [closed]

  - by Ollie Saunders

  I wonder if anyone could recommend resource or resources such as a good book that: explains how all the important protocols work and interact. I’m interested in those that are relevant in a typical home network and used over the Internet explains in detail how ADSL Internet connections work to the level of depth necessary so that I’m able to tweak and measure performance settings starts from the beginning but attempts to provide proper understanding rather than idiot-oriented steps to follow Basically, I’m interested in how these technologies work and tend to be implemented in hardware and software rather than “here’s what to do if…” I’m interested in Computer Networking by Andrew S. Tanenbaum and I wonder if anyone else has any experience with that title. It’s expensive but I could probably loan a copy for £3 from the library or so.

  Read the article

• Why Standards Place Limits on Data Transfer Rates?

  - by Mehrdad

  This is a rather general question about hardware and standards in general: Why do they place limits on data transfer rates, and disallow manufacturers from exceeding those rates? (E.g. 100 Mbit/s for Wireless G, 150 Mbit/s for Wireless N, ...) Why not allow for some sort of handshake protocol, whereby the devices being connected agree upon the maximum throughput that they each support, and use that value instead? Why does there have to be a hard-coded limit, which would require a new standard for every single improvement to a data rate?

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

  - by Sheep

  BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

  Read the article

• Difference between tc qdisc and netdev_max_backlog

  - by Mediocre Gopher

  I'm wondering what the difference between these two things on linux is. According to the docs tc qdisc can be used to set the queue size for egress and ingress packets coming in and out of the NIC (or that's how I understood it). But from what I understand netdev_max_backlog can also be used to set this. If I were to set both of them which would be used? Or are there actually two queues that are being manipulated in this case? If there are two queues, which queue is above the other (if the application is at the top and the hardware at the bottom)?

  Read the article

• How can I to take an HDMI TV broadcast and overlay text in real time?

  - by ObligatoryMoniker

  Our company wants to be able to have LCD TVs displaying TV with the ability to add an overlay, like a stock ticker at the bottom of the screen, where human resources can add content to be displayed. I have been trying to nail down the correct terminology for this and come across terms like Keying, Compositing, Live Broadcast Graphics Presentation, and Hardware Overlay but I don't know which of these terms is truly the correct way to refer to what I am trying to do. Black Magic offers a product that seems like it can do what I am looking for but their product seems like it is geared for a totally different purpose than what I would be using it for. Compix also seems to have a product that would do what I need but again it seems like killing a fly with a sledge hammer. How can I to take an HDMI TV broadcast and overlay arbitrary content in real time?

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• Color Calibrate Dual Monitor XP SP2

  - by Laramie

  This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

  Read the article

• What would happen if I did a "Boot to VHD" to a VHD that was configured to run under Hyper-V?

  - by tbone

  Microsoft has a Hyper-V based VM I'm interested in running, however, I don't have access to a Windows Server 2008 machine to try it on, only a Windows 7 Pro x64 machine (Windows 7 does not support Hyper-V). This is the VM in question: This download contains three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. 2010 Information Worker Demonstration and Evaluation Virtual Machine (SP1) http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 I came across a somewhat relevant article from Scott Hanselman: Less Virtual, More Machine - Windows 7 and the magic of Boot to VHD: http://www.hanselman.com/blog/LessVirtualMoreMachineWindows7AndTheMagicOfBootToVHD.aspx I realize other options are to convert this VM to a VMWare compatible VM or some of the options to run it under VirtualBox. But instead of those routes, I'm wondering: What would happen if I tried to go the "Boot to VHD" route using this Hyper-V VHD? Is it possible that during the boot process, Windows would simply notice that hardware had changed and adjust accordingly, installing the appropriate drivers and continuing on without a hitch?

  Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >