behavior driven developme - Page 255

How do I get netcat to accept connections from outside the LAN?

- by Chris

I'm using netcat as a backend to shovel data back and forth for a program I'm making. I tested my program on the local network, and once it worked I thought it would be a matter of simply forwarding a port from my router to have my program work over the internet. Alas! This seems not to be the case. If I start netcat listening on port 6666 with: nc -vv -l -p 6666, then go to 127.0.0.1:6666 in a browser, as expected I see a HTTP GET request come through netcat (and my browser sits waiting in vain). If I go to my.external.ip.address:6666, however, nothing comes through at all and the browser displays 'could not connect to my.external.ip.address:6666'. I know that the port is correctly forwarded, as www.canyouseeme.org says port 6666 is open (and when netcat is not listening, that its closed). If I run netcat with -g my.adslmodem's.local.address to set the gateway address, I get the same behavior. Am I using this command line option correctly? Any insight as to what I'm doing wrong?

Read the article

Strange C++ performance difference?

- by STingRaySC

I just stumbled upon a change that seems to have counterintuitive performance ramifications. Can anyone provide a possible explanation for this behavior? Original code: for (int i = 0; i < ct; ++i) { // do some stuff... int iFreq = getFreq(i); double dFreq = iFreq; if (iFreq != 0) { // do some stuff with iFreq... // do some calculations with dFreq... } } While cleaning up this code during a "performance pass," I decided to move the definition of dFreq inside the if block, as it was only used inside the if. There are several calculations involving dFreq so I didn't eliminate it entirely as it does save the cost of multiple run-time conversions from int to double. I expected no performance difference, or if any at all, a negligible improvement. However, the perfomance decreased by nearly 10%. I have measured this many times, and this is indeed the only change I've made. The code snippet shown above executes inside a couple other loops. I get very consistent timings across runs and can definitely confirm that the change I'm describing decreases performance by ~10%. I would expect performance to increase because the int to double conversion would only occur when iFreq != 0. Chnaged code: for (int i = 0; i < ct; ++i) { // do some stuff... int iFreq = getFreq(i); if (iFreq != 0) { // do some stuff with iFreq... double dFreq = iFreq; // do some stuff with dFreq... } } Can anyone explain this? I am using VC++ 9.0 with /O2. I just want to understand what I'm not accounting for here.

Read the article

How to start a marquee with JavaScript based on user input?

- by APShredder

Hello everybody. I am trying to use JavaScript to start a marquee when a user puts their name into a textbox and then clicks a button. I've got an idea as to how to do it, but my script never fully works. Any help is appreciated! Here's what I have so far: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title></title> <script type="text/javascript"> function StartMarquee() { var text = document.getElementById(namebox); if (text != null) { document.write("<marquee behavior='scroll' direction='right'>Hello " + text + "!</marquee>"); } else { alert("Enter your name first!!!"); } } </script> </head> <body> <table style="margin:0px auto 0px auto;"> <tr><td>Enter your name!</td> <td><input type="text" id="namebox"/></td> <td><input type="button" value="Enter" onclick="StartMarquee()"/></td></tr> </table> </body> </html>

Read the article

Making dtSearch highlight one hit per phrase, rather than one hit per word-in-a-phrase

- by Chris

I'm using dtSearch to highlight text search matches within a document. The code to do this, minus some details and cleanup, is roughly along these lines: SearchJob sj = new SearchJob(); sj.Request = "\"audit trail\""; // the user query sj.FoldersToSearch.Add(path_to_src_document); sj.Execute(); FileConverter fileConverter = new FileConverter(); fileConverter.SetInputItem(sj.Results, 0); fileConvert.BeforeHit = "<a name=\"HH_%%ThisHit%%\"/><b>"; fileConverter.AfterHit = "</b>"; fileConverter.Execute(); string myHighlightedDoc = fileConverter.OutputString; If I give dtSearch a quoted phrase query like "audit trail" then dtSearch will do hit highlighting like this: An <a name="HH_0"/><b>audit</b> <a name="HH_1"/><b>trail</b> is a fun thing to have an <a name="HH_2"/><b>audit</b> <a name="HH_last"/><b>trail</b> about! Note that each word of the phrase is highlighted separately. Instead, I would like phrases to get highlighted as whole units, like this: An <a name="HH_0"/><b>audit trail</b> is a fun thing to have an <a name="HH_last"/><b>audit trail</b> about! This would A) make highlighting look better, B) improve behavior of my javascript that helps users navigate from hit to hit, and C) give more accurate counts of total # hits. Is there good ways to make dtSearch highlight phrases this way?

Read the article

hg archive to Remote Directory

- by Brett Daniel

Is there any way to archive a Mercurial repository to a remote directory over SSH? For example, it would be nice if one could do the following: hg archive ssh://[email protected]/path/to/archive However, that does not appear to work. It instead creates a directory called ssh: in the current directory. I made the following quick-and-dirty script that emulates the desired behavior by creating a temporary ZIP archive, copying it over SSH, and unzipping the destination directory. However, I would like to know if there is a better way. if [[ $# != 1 ]]; then echo "Usage: $0 [user@]hostname:remote_dir" exit fi arg=$1 arg=${arg%/} # remove trailing slash host=${arg%%:*} remote_dir=${arg##*:} # zip named to match lowest directory in $remote_dir zip=${remote_dir##*/}.zip # root of archive will match zip name hg archive -t zip $zip # make $remote_dir if it doesn't exist ssh $host mkdir --parents $remote_dir # copy zip over ssh into destination scp $zip $host:$remote_dir # unzip into containing directory (will prompt for overwrite) ssh $host unzip $remote_dir/$zip -d $remote_dir/.. # clean up zips ssh $host rm $remote_dir/$zip rm $zip Edit: clone-and-push would be ideal, but unfortunately the remote server does not have Mercurial installed.

Read the article

Submit information to url, but also open PDF

- by Mad Ducky Digital Branding

I have a client whose desire is to have her Wordpress blog show a MailChimp form on her home page as a gateway to a .pdf. I need the following behavior to occur when the user clicks "Submit": execute the included MailChimp's javascript file; this ensures the form was properly filled, and then performs the sign-up to the newsletter list (don't need help with this part) then show the user an informational PDF for download or viewing EDIT: The logical order was flipped from when I originally posted this. The script should execute, and only if the script gets executed properly should the PDF show to the user Note: My experience level with HTML and PHP is 3/4, and with JS I am 2/4 EDIT: (seems more like 1/4 at this point lol). If my research is correct, PHP (server-side language) would be used to do that which the client wants. Additional validation is not necessary beyond what MailChimp's script provides (it ensures that user has submitted a completed form) is not necessary in this case (the client says it's ok if the e-mail isn't valid at all). EDIT: Reworded this sentence from original post to be more clear The .pdf URL and content is static, and simply needs to be shown, not generated. ----RESEARCH---- I know that the Mailchimp form uses the following line to actually submit the information, but I want to do the action mentioned below, as well as open the aforementioned .pdf: <form action="http://*BLAH*.us2.list-manage.com/subscribe/post?u=*BLAHBLAH*&id=*BLAHBLAHBLAH*" method="post" id="mc-embedded-subscribe-form" name="mc-embedded-subscribe-form" class="validate" target="_blank"> I am reading on other sites that I can conceivably point "action" to a .php file, but if there is a way to do this with javascript - since its using the .js file that I created for that already anyways, then I would be most happy. Barring that, I'll take what I can get.. ----SOLUTION?---- ...

Read the article

Issue with IHttpHandler and relative URLs

- by vtortola

Hi, I've developed a IHttpHandler class and I've configured it as verb="*" path="*", so I'm handling all the request with it in an attempt of create my own REST implementation for a test web site that generates the html dynamically. So, when a request for a .css file arrives, I've to do something like context.Response.WriteFile(Server.MapPath(url)) ... same for pictures and so on, I have to response everything myself. My main issue, is when I put relative URLs in the anchors; for example, I have main page with a link like this <a href="page1">Go to Page 1</a> , and in Page 1 I have another link <a href="page2">Go to Page 2</a>. Page 1 and 2 are supposed to be at the same level (http://host/page1 and http://host/page2, but when I click in Go to Page 2, I got this url in the handler: ~/page1/~/page2 ... what is a pain, because I have to do an url = url.SubString(url.LastIndexOf('~')) for clean it, although I feel that there is nothing wrong and this behavior is totally normal. Right now, I can cope with it, but I think that in the future this is gonna bring me some headache. I've tried to set all the links with absolute URLs using the information of context.Request.Url, but it's also a pain :D, so I'd like to know if there is a nicer way to do these kind of things. Don't hesitate in giving me pretty obvious responses because I'm pretty new in web development and probably I'm skipping something basic about URLs, Http and so on. Thanks in advance and kind regards.

Read the article

String length differs from Javascript to Java code

- by François P.

I've got a JSP page with a piece of Javascript validation code which limits to a certain amount of characters on submit. I'm using a <textarea> so I can't simply use a length attribute like in a <input type="text">. I use document.getElementById("text").value.length to get the string length. I'm running Firefox 3.0 on Windows (but I've tested this behavior with IE 6 also). The form gets submitted to a J2EE servlet. In my Java servlet the string length of the parameter is larger than 2000! I've noticed that this can easily be reproduced by adding carriage returns in the <textarea>. I've used Firebug to assert the length of the <textare> and it really is 2000 characters long. On the Java side though, the carriage returns get converted to UNIX style (\r\n, instead of \n), thus the string length differs! Am I missing something obvious here or what ? If not, how would you reliably (cross-platform / browser) make sure that the <textarea> is limited.

Read the article

iPhone UIView Animation Disables UIButton Subview

- by bensnider

So I've got a problem with buttons and animations. Basically, I'm animating a view using the UIView animations while also trying to listen for taps on the button inside the view. The view is just as large as the button, and the view is actually a subclass of UIImageView with an image below the button. The view is a subview of a container view placed in Interface Builder with user interaction enabled and clipping enabled. All the animation and button handling is done in this UIImageView subclass, while the startFloating message is sent from a separate class as needed. If I do no animation, the buttonTapped: message gets sent correctly, but during the animation it does not get sent. I've also tried implementing the touchesEnded method, and the same behavior occurs. UIImageView subclass init (I have the button filled with a color so I can see the frame gets set properly, which it does): - (id)initWithImage:(UIImage *)image { self = [super initWithImage:image]; if (self != nil) { // ...stuffs UIButton *tapBtn = [UIButton buttonWithType:UIButtonTypeCustom]; tapBtn.frame = CGRectMake(0, 0, self.frame.size.width, self.frame.size.height); [tapBtn addTarget:self action:@selector(buttonTapped:) forControlEvents:UIControlEventTouchUpInside]; tapBtn.backgroundColor = [UIColor cyanColor]; [self addSubview:tapBtn]; self.userInteractionEnabled = YES; } return self; } Animation method that starts the animation (if I don't call this the button works correctly): - (void)startFloating { [UIView beginAnimations:@"floating" context:nil]; [UIView setAnimationDelegate:self]; [UIView setAnimationCurve:UIViewAnimationCurveLinear]; [UIView setAnimationDuration:10.0f]; self.frame = CGRectMake(self.frame.origin.x, -self.frame.size.height, self.frame.size.width, self.frame.size.height); [UIView commitAnimations]; } So, to be clear: Using the UIView animation effectively disables the button. Disabling the animation causes the button to work. The button is correctly sized and positioned on screen, and moves along with the view correctly.

Read the article

boost::binding that which is already bound

- by PaulH

I have a Visual Studio 2008 C++ application that does something like this: template< typename Fcn > inline void Bar( Fcn fcn ) // line 84 { fcn(); }; template< typename Fcn > inline void Foo( Fcn fcn ) { // this works fine Bar( fcn ); // this fails to compile boost::bind( Bar, fcn )(); }; void main() { SYSTEM_POWER_STATUS_EX status = { 0 }; Foo( boost::bind( ::GetSystemPowerStatusEx, &status, true ) ); // line 160 } *The call to GetSystemPowerStatusEx() is just for demonstration. Insert your favorite call there and the behavior is the same. When I go to compile this, I get 84 errors. I won't post them all unless asked, but they start with this: 1>.\MyApp.cpp(99) : error C2896: 'boost::_bi::bind_t<_bi::dm_result<MT::* ,A1>::type,boost::_mfi::dm<M,T>,_bi::list_av_1<A1>::type> boost::bind(M T::* ,A1)' : cannot use function template 'void Bar(Fcn)' as a function argument 1> .\MyApp.cpp(84) : see declaration of 'Bar' 1> .\MyApp.cpp(160) : see reference to function template instantiation 'void Foo<boost::_bi::bind_t<R,F,L>>(Fcn)' being compiled 1> with 1> [ 1> R=BOOL, 1> F=BOOL (__cdecl *)(PSYSTEM_POWER_STATUS_EX,BOOL), 1> L=boost::_bi::list2<boost::_bi::value<_SYSTEM_POWER_STATUS_EX *>,boost::_bi::value<bool>>, 1> Fcn=boost::_bi::bind_t<BOOL,BOOL (__cdecl *)(PSYSTEM_POWER_STATUS_EX,BOOL),boost::_bi::list2<boost::_bi::value<_SYSTEM_POWER_STATUS_EX *>,boost::_bi::value<bool>>> 1> ] If anybody can point out what I may be doing wrong, I would appreciate it. Thanks, PaulH

Read the article

Custom ConfigurationSection: CallbackValidator called with empty string

- by Paolo Tedesco

I am writing a custom configuration section, and I would like to validate a configuration property with a callback, like in this example: using System; using System.Configuration; class CustomSection : ConfigurationSection { [ConfigurationProperty("stringValue", IsRequired = false)] [CallbackValidator(Type = typeof(CustomSection), CallbackMethodName = "ValidateString")] public string StringValue { get { return (string)this["stringValue"]; } set { this["stringValue"] = value; } } public static void ValidateString(object value) { if (string.IsNullOrEmpty((string)value)) { throw new ArgumentException("string must not be empty."); } } } class Program { static void Main(string[] args) { CustomSection cfg = (CustomSection)ConfigurationManager.GetSection("customSection"); Console.WriteLine(cfg.StringValue); } } And my App.config file looks like this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="customSection" type="CustomSection, config-section"/> </configSections> <customSection stringValue="lorem ipsum"/> </configuration> My problem is that when the ValidateString function is called, the value parameter is always an empty string, and therefore the validation fails. If i just remove the validator, the string value is correctly initialized to the value in the configuration file. What am I missing? EDIT I discovered that actually the validation function is being called twice: the first time with the default value of the property, which is an empty string if nothing is specified, the second time with the real value read from the configuration file. Is there a way to modify this behavior?

Read the article

How to suppress quotes in Powershell commands to executables

- by David Gladfelter

Is there any way to supress the enclosing quotation marks around each command-line argument that powershell likes to generate and then pass to external executables for command line arguments that have spaces in them? Here's the situation: One way to unpack many installers is a command of the form: msiexec /a <packagename> /qn TARGETDIR="<path to folder with spaces>" Trying to execute this from powershell has proven quite difficult. Powershell likes to enclose parameters with spaces in double-quotes. The following lines: msiexec /a somepackage.msi /qn 'TARGETDIR="c:\some path"' msiexec /a somepackage.msi /qn $('TARGETDIR="c:\some path"') $td = '"c:\some path"' msiexec /a somepackage.msi /qn TARGETDIR=$td All result in the following command line (as reported by the Win32 GetCommandLine() api): "msiexec" /a somepackage.msi /qn "TARGETDIR="c:\some path"" This command line: msiexec /a somepackage.msi TARGETDIR="c:\some path" /qn results in "msiexec" /a fooinstaller.msi "TARGETDIR=c:\some path" /qn It seems that Powershell likes to enclose the results of expressions meant to represent one argument in quotation marks when passing them to external executables. This works fine for most executables. However, MsiExec is very specific about the quoting rules it wants and won't accept any of the command lines Powershell generates for paths have have spaces in them. Is there any way to suppress this behavior?

Read the article

Hosting Multiple hosts under IIS for WCF

- by Josh

Hello everyone, I need to use multiple hosts under IIS for WCF. We're using wshttpbinding and we've found NO success so far even after checking out a couple of similar questions on stackoveflow. Here is my web.config <?xml version="1.0"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings/> <connectionStrings> <add name="ConString" connectionString="Data Source=.\SQLEXPRESS;Initial Catalog=WebSMS20July;Integrated Security=True"/> </connectionStrings> <system.web> <customErrors mode="Off"/>   <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation>  <authentication mode="Windows"/>  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true"> <baseAddressPrefixFilters> <add prefix="http://localhost:12350"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> <bindings> <wsHttpBinding> <binding name="wsHttpBinding" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <security mode="None"> <transport clientCredentialType="None" /> <message clientCredentialType="None" negotiateServiceCredential="false" establishSecurityContext="false" /> </security> </binding> <binding name="NewBinding0" /> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="WcfService1.Service1Behavior" name="WcfService1.Service1"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="wsHttpBinding" bindingName="wsHttpBinding" contract="WcfService1.IService1"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <endpoint binding="wsHttpBinding" bindingConfiguration="wsHttpBinding" bindingName="wsHttpBinding2" contract="WcfService1.IService1" listenUri="http://localhost:8090" /> <host> <baseAddresses> <add baseAddress="http://mydomain/mywcfservice/Service1.svc" /> <add baseAddress="http://localhost/mywcfservice/Service1.svc" /> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="WcfService1.Service1Behavior">  <serviceMetadata httpGetEnabled="true"/>  <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> Here's my service factory class using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.ServiceModel; using System.ServiceModel.Activation; namespace WcfService1 { public class CustomHostFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { //CustomHost customServiceHost = // new CustomHost(serviceType, baseAddresses[1]); //return customServiceHost; ServiceHost host; host = new ServiceHost(serviceType, baseAddresses[0]); return host; } class CustomHost : ServiceHost { public CustomHost(Type serviceType, params Uri[] baseAddresses) : base(serviceType, baseAddresses) { } protected override void ApplyConfiguration() { base.ApplyConfiguration(); } } } } Contents of my Service1.svc file <%@ ServiceHost Language="C#" Debug="true" Service="WcfService1.Service1" CodeBehind="Service1.svc.cs" Factory="WcfService1.CustomHostFactory" %> What could possibly be wrong? Would appreciate any help. Thanks.

Read the article

How to transfer objects through the header in WCF

- by Michael

I'm trying to transfer some user information in the header of the message through message inspectors. I have created a behavior which adds the inspector to the service (both client and server). But when I try to communicate with the service I get the following error: XmlException: Name cannot begin with the '<' character, hexadecimal value 0x3C. I have also get exception telling me that DataContracts where unexpected. Type 'System.DelegateSerializationHolder+DelegateEntry' with data contract name 'DelegateSerializationHolder.DelegateEntry:http://schemas.datacontract.org/2004/07/System' is not expected. Consider using a DataContractResolver or add any types not known statically to the list of known types - for example, by using the KnownTypeAttribute attribute or by adding them to the list of known types passed to DataContractSerializer. The thing is that my object contains other objects which are marked as DataContract and I'm not interested adding the KnownType attribute for those types. Another problem might be that my object to serialize is very restricted in form of internal class and internal properties etc. Can anyone guide me in the right direction. What I'm I doing wrong? Some code: public virtual object BeforeSendRequest(ref Message request, IClientChannel channel) { var header = MessageHeader.CreateHeader("<name>", "<namespace>", object); request.Headers.Add(header); return Guid.NewGuid(); }

Read the article

WinForms and ShowDialog problem.

- by SchlaWiener

I have a borderless WinForms app. The main window creates other forms (simple dialogs where I can click yes or no) with ShowDialog(). Every created dialog is not visible in the taskbar, my app has only one taskbar entry that focuses my app (and if a dialog is open that one is focused). If I use ALT+TAB to cycle to all open windows I only see one entry, too. However, If the dialog is created while my app doesn't have the focus (for example the user starts a long running task, starts to work on something else and while being in the background, my app shows a dialog "Task done...") and I want to go back to my app, things are getting strange. If I click on the taskbar to focus my app, the main window is focused (not the dialog). I can't use the main window (because there is still an open modal dialog). Windows 7 ALT-TAB preview shows the Dialog while taskbar mouseover preview shows the main window (In normal behavior both show the dialog in front of the main window). The only way to make my app usable again is to ALT-TAB to the entry and close the modal dialog. If I use ALT-TAB only the dialog is brought to the front and the main window is still in the background Is there a way to prevent that from happening? I know what to do, but most customers think the app crashed since the main window doesn't respond.

Read the article

Why is Swing Parser's handleText not handling nested tags?

- by Jim P

I need to transform some HTML text that has nested tags to decorate 'matches' with a css attribute to highlight it (like firefox search). I can't just do a simple replace (think if user searched for "img" for example), so I'm trying to just do the replace within the body text (not on tag attributes). I have a pretty straightforward HTML parser that I think should do this: final Pattern pat = Pattern.compile(srch, Pattern.CASE_INSENSITIVE); Matcher m = pat.matcher(output); if (m.find()) { final StringBuffer ret = new StringBuffer(output.length()+100); lastPos=0; try { new ParserDelegator().parse(new StringReader(output.toString()), new HTMLEditorKit.ParserCallback () { public void handleText(char[] data, int pos) { ret.append(output.subSequence(lastPos, pos)); Matcher m = pat.matcher(new String(data)); ret.append(m.replaceAll("<span class=\"search\">$0</span>")); lastPos=pos+data.length; } }, false); ret.append(output.subSequence(lastPos, output.length())); return ret; } catch (Exception e) { return output; } } return output; My problem is, when I debug this, the handleText is getting called with text that includes tags! It's like it's only going one level deep. Anyone know why? Is there some simple thing I need to do to HTMLParser (haven't used it much) to enable 'proper' behavior of nested tags? PS - I figured it out myself - see answer below. Short answer is, it works fine if you pass it HTML, not pre-escaped HTML. Doh! Hope this helps someone else. <span>example with <a href="#">nested</a> <p>more nesting</p> </span>

Read the article

TeamCity and pending Git merge branch commit keeps build with failed tests

- by Vladimir

We use TeamCity for continuous integration and Git for source control. Generally it works pretty well - convenient, modern and good us quick feedback when tests fails. There is a strange behavior related to Git merge specifics. Here are steps of the case: First developer pulls from master repo. Second developer pulls from master repo. First developer makes commit A locally. Second developer makes commit B locally; Second developer pushes commit B. First developer want to push commit A but unable because he have to pull commit B first. First developer pull's from remote reposity. First developer pushes commit A and generated merge branch commit. The history of commits in master repo is following: B second developer A first developer merge branch first developer. Now let's assume that Second Developer fixed some failing tests in his commit B. What TeamCity will do is following: Commit B arrives - TeamCity makes build #1 with all tests passed Commit A arrives - TeamCity makes build #2 (without commit B) test bar becomes Red! TeamCity thought that Pending "Merge Branch" commit doesn't contain any changes (any new files) - but it actually does contain the merge of commit B, so the TeamCity don't want to make new build here and make tests green. Here are two problems: 1. In our case we have failed tests returning back in second commit (commit A) 2. TeamCity don't want to make a new build and make tests back green. Does anybody know how to fix both of this problems. I consider some reasonable general approach.

Read the article

jquery ui 1.7 autocomplete show dialog on select

- by Daniel S

Hello, I am using an autocomplete widget, and would like a dialog to show when an item is selected. The dialog does show up, but I want a field in the dialog to receive focus when it opens. Here is what I have tried so far: //HTML <form action="#"> <p><input id="busca" /></p> </form> <div id="agregar" title="Agregar Parte"> <label for="cantidad">Cantidad:</label> <input name="cantidad" id="cantidad" size="3" /> </div> //jquery $(function(){ $("#agregar").dialog({ autoOpen: false, //also tried open: function(){$("#cantidad").focus()} } ); //.bind("dialogfocus", ... ) does not work either $("#agregar").bind("focus", function(){ $("#cantidad").focus(); }); $("#busca").autocomplete({ source: "/carrito/autocomplete/", minLength: 1, select: function(e, ui) { $("#agregar").dialog("open"); } }); }); I think autoselect's default behavior is still doing something as the autoselect widget receives focus after the dialog is shown. Any help would be greatly appreciated.

Read the article

jquery: prepopulating autocomplete fields

- by David Tildon

I'm using the tokenizing autocomplete plugin for jquery ( http://loopj.com/2009/04/25/jquery-plugin-tokenizing-autocomplete-text-entry ). I mostly use Ruby, and I'm really unfamiliar with javascript, though. My basic setup looks like this, and works fine for a new, blank form: $(document).ready(function () { $("#tag_ids_field").tokenInput("/tags", { queryParam: "search" }); }); The problem comes when I try to prepopulate it, like for an edit page. I'm trying to do something like this (where the "#tag_ids_field" text box contains the JSON when the page is loaded - that way is just cleaner on the application side of things). $(document).ready(function () { var tags = $("#tag_ids_field").html(); $("#tag_ids_field").tokenInput("/tags", { queryParam: "search", prePopulate: tags }); }); However, when the page loads I see that it's just filled with hundreds of entries that read 'undefined'. I get this even if I take the JSON output that Rails provides and try sticking it right in the .js file: $(document).ready(function () { $("#tag_ids_field").tokenInput("/tags", { queryParam: "search", prePopulate: "[{\"id\":\"44\",\"name\":\"omnis sit impedit et numquam voluptas enim\"},{\"id\":\"515\",\"name\":\"deserunt odit id doloremque reiciendis aliquid qui vel\"},{\"id\":\"943\",\"name\":\"exercitationem numquam possimus quasi iste nisi illum\"}]" }); }); That's obviously not a solution, I just tried it out of frustration and I get the same behavior. My two questions: One, why are my text boxes being filled with "undefined" tags when I try to prepopulate, and how can I get them to prepopulate successfully? Two, I'm planning on having many autocomplete fields like this on the same page (for when several records are edited at once - they all query the same place). How can I make each autocomplete field take it's prepopulated values from it's own textbox? Something like (applying these settings to all input boxes with a certain class, not just the one of a particular id): $(document).ready(function () { $(".tag_ids_field").tokenInput("/tags", { queryParam: "search", prePopulate: (the contents of that particular ".tag_ids_field" input box) }); });

Read the article

jquery - radio button not checked on page load, but checked on same function call later

- by Bill Zimmerman

Hi, I'm having a strange problem with jquery. When my page loads, I dynamically create some simple radio buttons in a special i've created. However, the default radio button is not checked. It is checked however when the change() event is triggered later, but is never checked the first time. Can someone help? I am certain that the change() event is triggered on the page load, because the rest of the HTML is added dynamically and I can see it. The basic idea is when the page loads, I bind an event handler, and then immediately call it to make sure that the default options are loaded. $(document).ready(function() { $(".options select[name=App]").change(onAppChange); //trigger the change function in the dropdown to populate default options $(".options select[name=App]").change() } Here is the simple onAppChange() function: function onAppChange() { var val = $(this).val(); var app_options = $(this).closest(".options").find(".app_options"); //clear the app_options app_options.empty(); var newOptions = ''; switch(val) { case 'testapp': newOptions='\ <fieldset>\ <legend>TestApp</legend>\ Option 1:\ <label>\ <input type="radio" name="option1" value="value1" checked>\ Value1\ </label>\ \ <label>\ <input type="radio" name="option1" value="value2">\ value2\ </label>\ \ </fieldset>'; break; case 'todo': //for testing newOptions='FOO'; break; } app_options.append(newOptions); } Yes, I am aware that I could use javascript to automatically select a radio button again, but I asked this question because I wanted to understand why this is happening. When using and , there doesn't seem to be any problem. Only with radio buttons. Why does the behavior differ when the same change() event is triggered? What is going on behind the scenes?

Read the article

Overriding MSBuildExtensionsPath in the MSBuild task is flaky

- by Stuart Lange

This is already cross-posted at MS Connect: https://connect.microsoft.com/VisualStudio/feedback/details/560451 I am attempting to override the property $(MSBuildExtensionsPath) when building a solution containing a C# web application project via msbuild. I am doing this because a web application csproj file imports the file "$(MSBuildExtensionsPath)\Microsoft\VisualStudio\v9.0\WebApplications\Microsoft.WebApplication.targets". This file is installed by Visual Studio to the standard $(MSBuildExtensionsPath) location (C:\Program Files\MSBuild). I would like to eliminate the dependency on this file being installed on the machine (I would like to keep my build servers as "clean" as possible). In order to do this, I would like to include the Microsoft.WebApplication.targets in source control with my project, and then override $(MSBuildExtensionsPath) so that the csproj will import this included version of Microsoft.WebApplication.targets. This approach allows me to remove the dependency without requiring me to manually modify the web application csproj file. This scheme works fine when I build my solution file from the command line, supplying the custom value of $(MSBuildExtensionsPath) at the command line to msbuild via the /p flag. However, if I attempt to build the solution using the MSBuild task in a custom msbuild project file (overriding MSBuildExtensionsPath using the "Properties" attribute), it fails because the web app csproj file is attempting to import the Microsoft.WebApplication.targets from the "standard" Microsoft.WebApplication.targets location (C:\Program Files\MSBuild). Notably, if I run msbuild using the "Exec" task in my custom project file, it works. Even more notably, the FIRST time I run the build using the "MSBuild" task AFTER I have run the build using the "EXEC" task (or directly from the command line), the build works. Has anyone seen behavior like this before? Am I crazy? Is anyone aware of the root cause of this problem, a possible workaround, or whether this is a legitimate bug in MSBuild?

Read the article

Button Click Event Getting Lost

- by AlishahNovin

I have a Menu and Submenu structure in Silverlight, and I want the submenu to disappear when the parent menu item loses focus - standard Menu behavior. I've noticed that the submenu's click events are lost when a submenu item is clicked, because the parent menu item loses focus and the submenu disappears. It's easier to explain with code: ParentMenuBtn.Click += delegate { SubMenu.Visibility = (SubMenu.Visibility == Visibility.Visible) ? SubMenu.Collapsed : SubMenu.Visible; }; ParentMenuBtn.LostFocus += delegate { SubMenu.Visibility = Visibility.Collapsed; }; SubMenuBtn.Click += delegate { throw new Exception("This will never be thrown."); }; In my example, when SubMenuBtn is clicked, the first event that triggers is ParentMenuBtn.LostFocus(), which hides the container of SubMenuBtn. Once the container's visibility collapses, the Click event is never triggered. I'd rather avoid having to hide the sub-menu each time, but I'm a little surprised that the Click event is never triggered as a result... I can't put any checks inside the LostFocus() event to see if my SubMenuBtn has focus, because it does not gain focus until after the LostFocus() event is called. In other words, SubMenuBtn.IsFocused = false when LostFocus() is triggered. Anyone have any thoughts about this?

Read the article

JScrollPane Scrolls Down with Long Text in JEditorPane

- by Jim

Hello, I want to have a JEditorPane inside a JScrollPane. When the user clicks a button, the click listener will create a textEditor, call jscrollpane.setViewPort(textEditor), call textEditor.setText(String) to fill it with editable text, and call jscrollpane.getVerticalScrollBar().setValue(0). In case you're wondering, yes, the setText() must come after the setViewPort() for reasons that aren't on topic. Here is the problem: After the user clicks the button, the JScrollPane's view scrolls all the way to the bottom. I want the scrollbar to be at the top, as per the last line in my click listener. I popped open a debugger, and to my horror, discovered that the jscrollpane's viewport is being forced down to the bottom after the conclusion of the click listener (when pumping filters). It appears that Swing is delaying the population of the editor/jscrollpane until after the conclusion of the clicklistener, but is calling the scrollbar command first. Thus, the undesired behavior. Anyway, I'm wondering if there is a clean solution. It seems that wanting a scrollpane to be scrolled to the top after modification would be a reasonably common requirement, so I'm assuming this is a well-solved problem. Thanks!

Read the article

System.Dynamic bug?

- by ControlFlow

While I playing with the C# 4.0 dynamic, I found strange things happening with the code like this: using System.Dynamic; sealed class Foo : DynamicObject { public override bool TryInvoke( InvokeBinder binder, object[] args, out object result) { result = new object(); return true; } static void Main() { dynamic foo = new Foo(); var t1 = foo(0); var t2 = foo(0); var t3 = foo(0); var t4 = foo(0); var t5 = foo(0); } } Ok, it works but... take a look at IntelliTrace window: So every invokation (and other operations too on dynamic object) causes throwing and catching strange exceptions twice! I understand, that sometimes exceptions mechanism may be used for optimizations, for example first call to dynamic may be performed to some stub delegate, that simply throws exception - this may be like a signal to dynamic binder to resolve an correct member and re-point delegate. Next call to the same delegate will be performed without any checks. But... behavior of the code above looks very strange. Maybe throwing and catching exceptions twice per any operation on DynamicObject - is a bug?

Read the article

iPhone OpenGL Splash Screen? How?

- by Kyle

My app is based pretty much on the EAGLView in the SDK. It doesn't incorporate a ViewController. Rather it simply inits GL and starts painting immediately.. Currently, my app will load a very small PNG and displays it as quickly as possible. On a 3GS this is rather instant, but on a 3G it can take about 2 seconds. In the latter case of the 3G, the user is looking at a black screen for that time. Is this behavior allowed by Apple? Is there any way to alter this SDK example so that it makes use of 'default.png'? It doesn't seem so straight forward to me. I want my user to see an image as quickly as possible, and I also don't want to be rejected for such a little quirk like this as well. In the guidelines, they encourage you to use default.png for standard applications to show a sort of mockup of the interface while it actually loads. I want to initialize OpenGL, and ALSO display this. This default.png is loaded before the app screen launches. This is EXACLTY what I want to make use of. Any help is appreciated. Thanks!

Search Results

Search found 7954 results on 319 pages for 'behavior driven developme'.

Page 255/319 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262 | Next Page >

- by Chris

- by STingRaySC

- by APShredder

- by Chris

- by Brett Daniel

- by Mad Ducky Digital Branding

- by vtortola

- by François P.

- by bensnider

- by PaulH

- by Paolo Tedesco

- by David Gladfelter

- by Josh

- by Michael

- by SchlaWiener

- by Jim P

- by Vladimir

- by Daniel S

- by David Tildon

- by Bill Zimmerman

- by Stuart Lange

- by AlishahNovin

- by Jim

- by ControlFlow

- by Kyle

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262 | Next Page >