Search Results

Search found 21005 results on 841 pages for 'disk format'.

Page 257/841 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

  • ata error: UnrecovData Handshk

    - by Aaron Digulla
    I just saw this message in my log (openSUSE 11.3, Linux 2.6.36.2): ata6.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen ata6.00: irq_stat 0x08000000, interface fatal error ata6: SError: { UnrecovData Handshk } ata6.00: failed command: WRITE FPDMA QUEUED ata6.00: cmd 61/58:00:9f:69:00/00:00:00:00:00/40 tag 0 ncq 45056 out res 40/00:04:9f:69:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) ata6.00: status: { DRDY } ata6: hard resetting link ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: configured for UDMA/133 ata6: EH complete Two questions: Which disk caused the error? I search /sys and /proc but couldn't find a way to map ata6 to a device (/dev/sdaXY) When such an error happens, does Linux retry the disk operation? Or do I have a corrupt filesystem?

    Read the article

  • Get error (Repair Filesystem) 1 # when I install 4 new Hard drives in RedHat Linux 5 on a Dell PowerEdge 2900

    - by Alos Diallo
    Hi I am using a Dell PowerEdge 2900 running RedHat 5. I had 4 drives in the system using a Raid 5, I purchased and installed 4 more drives keeping the configuration the same. Set up the Vertual disks in PERC 6/i. When I exit out and reboot the system I get the following: fsck.ext3: No such file or dirrectory while trying open /dev/ddb1 [FAILED] ***An error occurred during the file system check. ***Dropping you to a shell; the system will reboot ***when you leave the shell. Then am prompted for the root pw. I enter it and am then prompted with: (Repair filesystem) 1# if I type fdisk -l I get some info on the disk along with: Disk /dev/sdb doesn't contain a valid partition table I am then prompted for (Repair filesystem) 2# If I reboot I am taken to the same screen again. The system was working before this happened. Does anyone know why this is happening and or what I can do to fix it? Thanks

    Read the article

  • Portable and Secure Document Repository

    - by Sivakanesh
    I'm trying to find a document manager/repository (WinXP) that can be used from a USB disk. I would like a tool that will allow you to add all documents into a single repository (or a secure file system). Ideally you would login to this portable application to add or retrieve a document and document shouldn't be accessible outside of the application. I have found an application called Benubird Pro (app is portable) that allows you to add files to a single repository, but downsides are that it is not secure and the repository is always stored on the PC and not on the USB disk. Are you able to recommend any other applications? Thanks

    Read the article

  • How can I set deadline as the I/O scheduler for USB Flash devices by using udev rules?

    - by ????
    I have set CFQ as the default I/O scheduler. I often get bad performance when I write data into a Flash device. This is resolved if I use deadline as the I/O scheduler for USB Flash devices. I can't always change the scheduler manually, right? I think writing udev rules is a good idea. Can someone please write rules for me? I want: When I plug in a USB device, detect the type of the device. If it is a portable USB hard disk, do nothing (I think if a device has more than one partitions, it always a portable hard disk. If it is a USB Flash device, set deadline as it's scheduler.

    Read the article

  • monitoring load on AWS EC2

    - by hortitude
    I'm interesting in monitoring our EC2 instances to ensure we scale up when necessary. Right now we are monitoring idle CPU time as our metric. We aren't measuring disk IO as we are not a very disk intensive application. When running on our own hardware in a datacenter I also usually monitor "load" from the top command. My question is: Does it make sense to monitor "load" on a shared env such as EC2? If so, how do you interpret the results?

    Read the article

  • Offline installer for .net 3.5 sp1 not working

    - by Tim Tom
    I download a big file of .Net 3.5 SP1 from http://download.microsoft.com/download/2/0/e/20e90413-712f-438c-988e-fdaa79a8ac3d/dotnetfx35.exe Now when I try to install it on Windows Server 2012, I get the following screenshot: What the?? When will the microsoft learn? Now this is a loop. When I try to install from Server Manager, I get installation cannot be done. It needs installation disk. Does that mean I can't install at all without the installation disk in presence?

    Read the article

  • Developing and implementing a testing plan for a software app deployed on a web server

    - by Abhzoo
    A company in the USA is building a new Web App that will be offered SaaS to customers and the development is being done by a software development team located in a different country(India). They are about to take delivery of a first demo to provide live feedback to the team in India. The overseas team requires a cloud server (Windows + SQL Standard, 8GB Ram, 8 vCPUs, 40GB SSD system disk, 80GB SSD data disk, 1600Mb/s network bandwidth) to serve as a tester server. When the tester is setup the team will install the app on the test server to get live feedback. Q:Explain in detail how you will develop and implement a testing plan for the software App. Be sure to explain the specifics. PLEASE HELP, NEED ANSWER ASAP

    Read the article

  • How to troubleshoot if a zip file is valid or if it is big file size to be unzipped ?

    - by mireille raad
    Hello , I am trying to unzip a file with the size of 2GB I am getting the following error : unzip CLTE_C_08.zip Archive: CLTE_C_08.zip End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of CLTE_C_08.zip or CLTE_C_08.zip.zip, and cannot find CLTE_C_08.zip.ZIP, period. After some googling, some people say that this error is because the file is too big, others say because file is corrupt, others say that it could be a not unix archive. So my question , how to find out if file is valid archive file on my Centos and what is the command/trick to uncompress big files ( if any ) Thanks in advance :)

    Read the article

  • Can DRM-free Kindle books still be read on the Kindle app for PC?

    - by verve
    I bought a bunch of Kindle books which I read in the Kindle for PC app but it's too restrictive so I want to try to convert them into another format but I'm worried whether the books will no longer function in the Kindle for PC app? Once you convert a Kindle book will it lose formatting etc.? Can it be re-converted back into the Kindle format once it has been converted? And, more importantly will Kindle book with a broken DRM work in the PC app? Win 7 Pro. Kindle for PC 1.8.3.

    Read the article

  • System failure - need diagnostic recommendation

    - by Ladislav Mrnka
    I have big problem with my computer. Configuration is: Intel i7 + 6x2GB OCZ DDR3 Motheboard: Asus P6T Deluxe V2, HDD controller configured to AHCI Main drive: OCZ Vertex 2 (SSD) - contains all installed programs and system Second drive: Samsung SpinPoint - contains User profiles, ProgramData, virtual machines and databases Third drive: Samsung SpinPoint - data drive + backups OS: Windows 7 Ultimate x64 I have never had any problem with this computer until now. During weekend my computer completely crashed without any reason. Each time I tried to boot to Windows I got BSOD with message BAD_SYSTEM_CONFIG_INFO and automatic restart (I didn't install any new SW or HW). But after restart main OCZ drive was disconnected (not detected by BIOS). When I turned off and on computer, the drive was again connected. It also happend every single time I tried to repair installation somehow. It ended with some error and after restart drive was disconnected. The only thing which worked was format + fresh install. After installing almost everything I wanted to install Visual Studio 2010 Ultimate (complete installation without SQL Server Express). During installation of VS itself I always get BSOD - it is too fast so I'm not able to read description. After restart it searches for all disk drives for really long time and sometimes it changes boot drive so the system is not able to start - Bootmgr not found. After reconfiguring BIOS the system starts. There is no event describing the failure in Event viewer. Installing VS 2010 is absolutely necessary for me. I need help with diagnostic. I need to find where is the problem - I expect that the problem is in OCZ drive or in HDD controller on motherboard but I don't know how to find it. All components still have valid warranty. Can you recommend me some approach or tools to find the problem? Edit: I'm still looking for source of the problem. New information is that Windows are not able to perform check disk (Chkdsk) on the SSD system drive. After restarting it always starts checking drive and in part where files are checked it fails with BSOD - BAD_SYSTEM_CONFIG_INFO. After next restart and skipping check disk tests the system runs.

    Read the article

  • MySQL dump, output each table row on a new line whilst using --extended-insert

    - by soopadoubled
    I'm having an issue, where for ease of use, I'd like to be able to format a command line MySQL dump so that each row of a given table is on a new line when using the --extended-insert option. Usually when using --extended-insert, every row of a given table is outputted on one line, and as far as I am aware there's no way to change this, other than post-processing the dump with perl or such like. The format I'm looking for is: -- -- Dumping data for table `ww_tbCountry` -- INSERT INTO `ww_tbCountry` (`iCountryId_PK`, `vCountryName`, `vShortName`, `iSortFlag`, `fTax`, `vCountryCode`, `vSageTaxCode`) VALUES (22, 'Albania', 'AL', 1, 0.00, '8', 'T9'), (33, 'Austria', 'AT', 1, 15.00, '40', 'T9'), (40, 'Belarus', 'BY', 1, 0.00, '112', 'T9'), (41, 'Belgium', 'BE', 1, 15.00, '56', 'T9'), (51, 'Bulgaria', 'BG', 1, 15.00, '100', 'T9' However, when I dump a database using Phpmyadmin, using --extended-insert, each row is dumped on a new line (as shown by the example above). I've gone through Phpmyadmin and can't find any documentation that would explain this. Is anyone able to shed any light on this? Thanks in advance, Ian

    Read the article

  • Any experience with SATA SAS Interposer Cards?

    - by korkman
    Driven by the current price difference between SATA and SAS disks on one side and the potentially bad behaviour of SATA disks in bigger storage arrays on the other side, I have found so-called SATA-to-SAS interposer cards. Advertised as "seamlessly adding SAS capabilities to existing SATA disk drives", I wonder if anyone here has had some experience with these or similar products. The major benefits I can identify are the increased cable voltage (if all drives are SAS connected), the ability to power-cycle the drive and multipath (if desired). Obviously the SATA drive will still have to be RAID edition. The question is: Do these cards indeed increase the overall reliability of a storage system, or will failing SATA disks cause trouble nevertheless? Edit: I'm not asking for hypothetical answers, only actual experience please. I'm well aware that the typical 10k SAS drive is more reliable (and better performing) than 7200 SATA drives. But how does a nearline SAS, which is phyiscally the same disk as its SATA counterpart, compare to the SATA version with interposer?

    Read the article

  • Intuitive view of what's using the hard drive so much on Windows 7?

    - by Aren Cambre
    Sometimes my hard drive usage is near 100%, and I have no idea what is causing it. Are there any utilities that can help diagnose excessive hard drive usage and have as intuitive of an interface as Task Manager's Processes tab, which I can sort by CPU usage? I am aware of using procmon, of adding columns to Task Manager's Processes tab like I/O Read Bytes and I/O Write Bytes, and using Resource Monitor's Disk tab. Too often, these don't give me useful information or clearly identify a single process that is hogging the disk.

    Read the article

  • ESXi5 - management services crashes - vms running

    - by Frederik Nielsen
    I have a setup with two ESXi5 servers. We are(were) running with a ISCSi box to server disk for the VM's - however we are in the progress of migrating away from it, because the storage os disk is bad. Now, one of the ESXi hosts has been running for ~20hrs, and it seems like the management services just crashed on that host.. The vms are still running - so it's not really serious. However, I want to fix it. Should I be worried? Will the VM's keep running? The hosts does respond on pings. I am running a vcenter to administrate the hosts. Thanks in advance.

    Read the article

  • Xen 4.1 host (dom0) with blktap disks ("tap:aio:") not connecting

    - by Manwe
    Problem using blktap with xen-4.1 running Ubuntu Precise stock kernel with dom0 xen-4.1. I get: [ 5.580106] XENBUS: Waiting for devices to initialise: 295s...290s. ... [ 300.580288] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) And some syslog lines: May 17 13:07:30 localhost logger: /etc/xen/scripts/blktap: add XENBUS_PATH=backend/tap/10/51713 May 17 13:07:31 localhost logger: /etc/xen/scripts/blktap: Writing backend/tap/10/51713/hotplug-status connected to xenstore. with tap:aio: disk lines. file:/ works. disk = [ 'tap:aio:/data/root.img,xvda1,w', ] Problem exists with lucid and precises domU kernels and both guests work in Ubuntu hardy dom0 Host 64bit 2.6.24-28-xen xen-3.3 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise

    Read the article

  • Determine Location of Inode Usage

    - by Dave Forgac
    I recently installed Munin on a development web server to keep track of system usage. I've noticted that the system's inode usage is climbing by about 7-8% per day even though the disk usage has barely increased at all. I'm guessing something is writing a ton of tiny files but I can't find what / where. I know how to find disk space usage but I can't seem to find a way to summarize inode usage. Is there a good way to determine inode usage by directory so I can locate the source of the usage?

    Read the article

  • I found a some bad sectors with chkdsk. Should I be worried?

    - by mottalrd
    Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

    Read the article

  • How much space do NTFS hardlinks/symlinks occupy?

    - by Felix Dombek
    Well, I guess it must be something proportional to the original filename plus the new filename for symlinks, and only the new filename for hardlinks, but how does this affect the disk space exactly? I just made a folder with about a hundred thousand symbolic links in it, and the folder still reported 0 bytes usage. I may be mistaken, but I even think the free capacity of the drive remained the same. Then I permanently deleted the folder and the sizes still stayed the same. Could I fill up a hard disk just with symlinks? Or does NTFS have limitations in that no more than x symlinks are allowed on one drive/in one folder, so the capacity of the drive cannot be reached?

    Read the article

  • Converting an ancient RH8 system to VMware ESXi

    - by donatello
    I am curious to know what options I have to convert a very old RedHat8 machine to a virtual one on ESXi. Looking at VMware Converter it seems there's an option to login to the RH8 using SSH, and from there it will convert to the ESXi-server. That makes me a bit nervous though, exactly what is happening there? The RH8 machine is slightly critical, and if anything messes up it'll likely result in many hours extra work. :( Another option I thought of was to boot a LiveCD on RH8-system and create a raw "dd dump" of the disk. The similar method is used to restore the image, I boot a LiveCD on the VM in ESXi and use "dd" to write it to disk. Is there any other option I could use? I'm using the cheap version of ESXi, hence I have no access to the Converter BootCD so these rather cumbersome methods is the only I can think of. :)

    Read the article

  • Linux Software Raid runs checkarray on the First Sunday of the Month? Why?

    - by mgjk
    It looks like Debian has a default to run checkarray on the first Sunday of the month. This causes massive performance problems and heavy disk usage for 12 hours on my 2TB mirror. Doing this "just in case" is bizzare to me. Discovering data out of sync between the two disks without quorum would be a failure anyway. This massive checking could only tell me that I have an unrecoverable drive failure and corrupt data. Which is nice, but not all that helpful. Is it necessary? Given I have no disk errors and no reason to believe my disks have failed, why is this check necessary? Should I take it out of my cron? /etc/cron.d# tail -1 /etc/cron.d/mdadm 57 0 * * 0 root [ -x /usr/share/mdadm/checkarray ] && [ $(date +\%d) -le 7 ] && /usr/share/mdadm/checkarray --cron --all --quiet Thanks for any insight,

    Read the article

  • harddrive problem (usb external)

    - by masfenix
    Hey guys I am using a Maxtor One Touch 3 given to my by my uncle. It is connected through USB2.0 When I plug it in, XP installs it and says "the device is ready to use". But it dosnt show up on my computer. It dosn't even show up in disk mangement. I then install Acronis Disk Director (which detects it) but marks it as offline. if i try to change it to online, nothing happens. (actually the lights on the HD blink - meaning communication and goes back into offline mode). The lights on the HD return to a solid which mean "working properly". Here is a screenshot: Is there any way to extract the data off the drive? is the drive corrupt? sitll useable? edit: DISKPART screenshot: edit2: I ran Seagate diagnostic tool and this came up: Long Generic - Started 9/10/2010 6:44:36 PM Bad LBA: 0 Unable to repair Long Generic - FAIL 9/10/2010 6:46:41 PM SeaTools Test Code: 4

    Read the article

  • Using international phone numbers on iPhone [closed]

    - by Cawas
    Spin off question Is it possible to hack a SIM card to add a javacard application on it (to properly format international numbers)? If yes, how? Original Question In my previous phone carrier I could just dial +55 11 99883655 and it would just work. Now I moved to a new carrier and it doesn't work anymore! When I dial the same international number it keeps saying the number isn't formated correctly. How can I get my iPhone to understand international numbering back again? I've got over 100 contacts with numbers stored in this format already, and I want to keep them that way. edit: I originally asked this question here, moved it to apple stackexchange and now I'm bringing a new one (hopefuly).

    Read the article

  • What is a good program, with PostScript output (for LaTeX), to make circuit diagrams?

    - by Breakthrough
    Hello; I just found out to my dismay that Visio 2007 does not include the ability to output drawings in EPS/PS formats, which makes it unsuitable for my uses. I wish to create various circuit digrams (including some texts for resistor values, voltage sources, etc...) with most electronic components (resistors, logic gates). Visio was a great tool for this, but I need to include these in lab reports which I am typesetting with LaTeX. The recommended format to include images in LaTeX is PostScript, so the fonts can be properly substituted, and the drawings scale properly. So my question: Is there a Windows program which will allow me to create circuit diagrams, add various labels, and export it to PostScript format?

    Read the article

  • Diff and ignore lines missing in one file

    - by Millianz
    I want to diff two files and ignore lines that are present in one file but missing in the other. For example File1: foo bar baz bat File2: foo ball bat I'm currently running the following diff command diff File1 File2 --changed-group-format='%>' --unchanged-group-format='' Which in this case would produce bar baz as the output, i.e. only missing or conflicting lines. I would like to only print conflicting lines, i.e. ignore cases where one line is missing from File2 and is present in File1 (not the other way around). Is there any way to do something like this using diff or do I have to resort to other tools? If so, what would you recommend?

    Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >