Search Results

Search found 14923 results on 597 pages for 'settings bundle'.

Page 257/597 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

  • /etc/network/interfaces doesn't always take affect

    - by user1221444
    For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

    Read the article

  • UppercuT and Mercurial (hg)

    - by Robz / Fervent Coder
    I mentioned this awhile back on twitter, but UppercuT (UC) has support for Mercurial for versioning your assemblies. In the settings file, all you need to do it tell UC to use hg. When you build your assemblies, they will use the changeset number in the version, and in the informational version, you get the hash, just like you do when using Git. Pretty sweet. By the way, UC also supports .NET 4.0 as of last week. With this knowledge you shall build.

    Read the article

  • UppercuT and Mercurial (hg)

    I mentioned this awhile back on twitter, but UppercuT (UC) has support for Mercurial for versioning your assemblies. In the settings file, all you need to do it tell UC to use hg. When you build your assemblies, they will use the changeset number in the version, and in the informational version, you get the hash, just like you do when using Git. Pretty sweet. By the way, UC also supports .NET 4.0 as of last week. With this knowledge you shall build. ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • horizontal line across screen at startup

    - by Debbie Poole
    I recently ran an upgrade from 12.04 to 12.10 and was using Nvidia current tested drivers and all seemed ok at first. Then suddenly every time I started the computer and shutdown, the graphical plymouth logo changed to text.The only changes I made to try to correct this issue were; sudo apt-get --purge remove nvidia-current nvidia-settings sudo apt-get --purge autoremove sudo apt-get clean sudo apt-get update sudo apt-get install nvidia-current and this made no change at all to the display. Then I read somewhere that Nouveau drivers may be the answer, so I installed them to use instead, and hey presto, the shutdown screen displays the Plymouth splash. However with startup, I get a stable purple screen, for a while, and than a thick black horizontal line appears, really ugly-looking, and then the loging screen appears to be ok. Can I correct the login screen same as the shutdown screen?

    Read the article

  • ERROR with Ubuntu: Cannot open the disk 'D:\My Documents\My Virtual Machines\Ubuntu\Ubuntu-1.vmdk' or one of the snapshot disks it depends on

    - by leiyu
    Cannot open the disk 'D:\My Documents\My Virtual Machines\Ubuntu\Ubuntu-1.vmdk' or one of the snapshot disks it depends on. Reason: The physical disk is already in use. ====================== When I powered on my Ubuntu on VMwave, a window showed up within words above. I tried to remove the old hard disk in settings and created a new one, but it still doesnot work. Also, I tried to delete the .lck files and even the doc. BUT....... Has someone solved this problem? PLEASE do me a favour!!Many thanks!!

    Read the article

  • Take Two: Comparing JVMs on ARM/Linux

    - by user12608080
    Although the intent of the previous article, entitled Comparing JVMs on ARM/Linux, was to introduce and highlight the availability of the HotSpot server compiler (referred to as c2) for Java SE-Embedded ARM v7,  it seems, based on feedback, that everyone was more interested in the OpenJDK comparisons to Java SE-E.  In fact there were two main concerns: The fact that the previous article compared Java SE-E 7 against OpenJDK 6 might be construed as an unlevel playing field because version 7 is newer and therefore potentially more optimized. That the generic compiler settings chosen to build the OpenJDK implementations did not put those versions in a particularly favorable light. With those considerations in mind, we'll institute the following changes to this version of the benchmarking: In order to help alleviate an additional concern that there is some sort of benchmark bias, we'll use a different suite, called DaCapo.  Funded and supported by many prestigious organizations, DaCapo's aim is to benchmark real world applications.  Further information about DaCapo can be found at http://dacapobench.org. At the suggestion of Xerxes Ranby, who has been a great help through this entire exercise, a newer Linux distribution will be used to assure that the OpenJDK implementations were built with more optimal compiler settings.  The Linux distribution in this instance is Ubuntu 11.10 Oneiric Ocelot. Having experienced difficulties getting Ubuntu 11.10 to run on the original D2Plug ARMv7 platform, for these benchmarks, we'll switch to an embedded system that has a supported Ubuntu 11.10 release.  That platform is the Freescale i.MX53 Quick Start Board.  It has an ARMv7 Coretex-A8 processor running at 1GHz with 1GB RAM. We'll limit comparisons to 4 JVM implementations: Java SE-E 7 Update 2 c1 compiler (default) Java SE-E 6 Update 30 (c1 compiler is the only option) OpenJDK 6 IcedTea6 1.11pre 6b23~pre11-0ubuntu1.11.10.2 CACAO build 1.1.0pre2 OpenJDK 6 IcedTea6 1.11pre 6b23~pre11-0ubuntu1.11.10.2 JamVM build-1.6.0-devel Certain OpenJDK implementations were eliminated from this round of testing for the simple reason that their performance was not competitive.  The Java SE 7u2 c2 compiler was also removed because although quite respectable, it did not perform as well as the c1 compilers.  Recall that c2 works optimally in long-lived situations.  Many of these benchmarks completed in a relatively short period of time.  To get a feel for where c2 shines, take a look at the first chart in this blog. The first chart that follows includes performance of all benchmark runs on all platforms.  Later on we'll look more at individual tests.  In all runs, smaller means faster.  The DaCapo aficionado may notice that only 10 of the 14 DaCapo tests for this version were executed.  The reason for this is that these 10 tests represent the only ones successfully completed by all 4 JVMs.  Only the Java SE-E 6u30 could successfully run all of the tests.  Both OpenJDK instances not only failed to complete certain tests, but also experienced VM aborts too. One of the first observations that can be made between Java SE-E 6 and 7 is that, for all intents and purposes, they are on par with regards to performance.  While it is a fact that successive Java SE releases add additional optimizations, it is also true that Java SE 7 introduces additional complexity to the Java platform thus balancing out any potential performance gains at this point.  We are still early into Java SE 7.  We would expect further performance enhancements for Java SE-E 7 in future updates. In comparing Java SE-E to OpenJDK performance, among both OpenJDK VMs, Cacao results are respectable in 4 of the 10 tests.  The charts that follow show the individual results of those four tests.  Both Java SE-E versions do win every test and outperform Cacao in the range of 9% to 55%. For the remaining 6 tests, Java SE-E significantly outperforms Cacao in the range of 114% to 311% So it looks like OpenJDK results are mixed for this round of benchmarks.  In some cases, performance looks to have improved.  But in a majority of instances, OpenJDK still lags behind Java SE-Embedded considerably. Time to put on my asbestos suit.  Let the flames begin...

    Read the article

  • Ubuntu 14.04 doesn't detect my discrete GPU

    - by user258887
    I recently purchased a laptop with an Nvidia GeForce 860m, and have installed Ubuntu 14.04. On my old laptop I had 12.04, which automatically filled Additional Drivers with Nvidia drivers. But on this computer, the only thing in Additional Drivers is Qualcomm. So I manually installed Nvidia, but X Server Settings doesn't seem to detect any GPU... lspci | grep VGA reports only my integrated Intel GPU, but lspci -v reports many things, including the Nvidia GPU: 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2) Subsystem: ASUSTeK Computer Inc. Device 157d Flags: fast devsel, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at ed000000 [disabled] [size=512K] Capabilities: access denied Don't know what any of that means. Not sure if it's supposed to say 'access denied'... I need my GPU to do CUDA and OpenGL programming. What else can I do to figure out why this isn't working?

    Read the article

  • How to prevent my screen from either dimming or the screen-lock starting when watching YouTube?

    - by Steven Roose
    My screen brightness used to dim after a few seconds to preserve battery. This is default in Ubuntu 12.04. However when watching video it should not dim. This works correctly when I watch videos using native applications like VLC. With in-browser video, however, the screen is not prevented from dimming. This is very annoying as you have to move your cursor every 10 seconds or so. I used to use Mac OSX where I had the same dimming settings and Flash videos were taken into account correctly. Anyone an idea how you can make YouTube prevent your screen from dimming?

    Read the article

  • What is a proper way of building Winform apps with multiple "screens"

    - by CurtisHx
    What's a proper way of building a Winform app that has multiple 'screens'? For example, I'm trying to write a small backup program (mainly for giggles), and I've been dumping controls and containers onto the form. I'm using panels and group boxes to separate out the different screens (eg: I'm using a panel to hold all of the controls for the "Settings" window, and another panel to show all the current backups that have been set up). Well, my form.cs file ballooned into a massive amount of code, and I feel like I'm doing something wrong. I can hardly find anything in the file, and I'm ready to start over. This project was just for me to expand my knowledge of C# and .NET, so starting a new project is not a huge deal.

    Read the article

  • Empathy 3.6.0 requires reauthorisation to Windows Live on every reboot

    - by Allu2
    I've been testing Ubuntu 12.10 beta2 and the only problem I've faced has been that with Windows Live Messenger(a.k.a MSN) After I have added Windows Live in the online-accounts in system settings, empathy works fine and connects to Windows Live Messenger with no problems until I reboot my system. After rebooting and logging in, when empathy connects to services it shows me message "Windows Live account requires authorisation" next to it is a button that takes me back to online-accounts where i can see the authorized Windows Live. So far the only way to get MSN work again has been to remove the Windows Live authorisation and add it again, which makes it work till the next time i close my computer. How could i make empathy to remember the authorisation to Windows Live

    Read the article

  • Both Webmin & ISPConfig won't work on my Ubuntu Linode

    - by SERVE-U
    I followed the steps on this page to download and setup Webmin on my Linode Ubuntu server, however, when I try to visit https + my.ip.add.ress + :10000, the page just hangs and nothing loads. I already looked into my firewall settings. I uninstalled Webmin and installed ISPConfig and all its dependencies, and the same thing happens at https + my.ip.add.ress + :8080. This is my first time managing a server so there could be something I overlooked. But my server is a pretty vanilla Ubuntu 12.10 with LAMP stack installed exactly as per the instructions in Linode's documentation.

    Read the article

  • External display suddenly not detected

    - by NChase
    I have a Lenovo IdeaPad U410 running Ubuntu Desktop 13.04. I have an external monitor that I connect to via HDMI, and it's worked flawlessly for six months. I plug in my laptop, it detects the display. The "change display" key built into the laptop works for switching between the two screens. Never any problems. This afternoon, when I reconnected my computer after taking it into another room for a bit, it didn't work. When I open up Display settings, it can't detect the display. I tried disconnecting/reconnecting everything multiple times. And most strangely, that same "change display" key now behaves like a Super key, opening the dash instead of toggling the display. Nothing at all changed between when I plugged it in this morning and when it stopped working a few hours later. I tried xrandr, that doesn't detect it either. Anyone have any ideas?

    Read the article

  • How to convert an XFS file system to HFS+

    - by user219350
    I have repeatedly convinced of the reliability of the XFS file system , and I was more than satisfied . I was happy with everything in Ubuntu 14.04 ( great software) , but there is a little "but ! " Basically, I work on OSX-Mavericks 10.9.3, which sees very Windows 8.1 and works wonders with NTFS, but does not see Ubuntu! Briefly describe the equipment: ASRock B75 Pro3-M i5 3330 GeForce GTX 650 Ti SATA 500GB running OS X Mavericks + Clover - a boot disk Toshiba 2TB running Windows 8.1 (x64) and Ubuntu 14.04 (amd64) If you boot from the Toshiba (where there is Ubuntu and boot Windows + GRUB) after restart boot from Clover, it is impossible. Tried a lot of options - as Clover installation and boot priority, and various settings for GRUB, but have not found an acceptable option and have no desire to reinstall again Clover (Mavericks reboots 20 seconds - excellent!) So please help on the file system - how to convert from XFS to HFS+ journaled. Mavericks to saw it all synced on Mac. Thank you for the sensible answer and help! Originally in Russian.

    Read the article

  • Changing DisplayMode seems not to update Input&Graphic Dimension

    - by coding.mof
    I'm writing a small game using Slick and Nifty-GUI. At the program startup I set the DisplayMode using the following lines: AppGameContainer app = new ... app.setDisplayMode( 800, 600, false ); app.start(); I wrote a Nifty-ScreenController for my settings dialog in which the user can select the desired DisplayMode. When I try to set the new DisplayMode within this controller class the game window gets resized correctly but the Graphics and Input objects aren't updated accordingly. Therefore my rendering code just uses a part of the new window. I tried to set different DisplayModes in the main method to test if it's generally possible to invoke this method multiple times. It seems that changing the DisplayMode only works before I call app.start(). Furthermore I tried to update the Graphics & Input object manually but the init and setDimensions methods are package private. :( Does someone know what I'm doing wrong and how to change the DisplayMode correctly?

    Read the article

  • Skype no sound on Kubuntu 13.10

    - by Michael Aquilina
    I just performed a fresh install of Kubuntu 13.10 on my machine. Everything is working great except for Skype. I cannot get any form of audio playback in Skype. In the sound settings panel I get a bunch of different sound sources, none of which work! At the moment I have set it to "sysdefault (unknown)" I installed it using the deb package found on the official website. My phonon backend is using phonon-gstreamer. When running skype from the terminal I get the following error messages: ALSA lib control.c:953:(snd_ctl_open_noupdate) Invalid CTL plughw:CARD=PCH ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Is this a known problem or has anyone experienced the problem and managed to solve it?

    Read the article

  • How do I disable the new invisible border feature (ruins Compiz' Grid plugin)?

    - by Ike
    A new feature was added recently that adds an invisible border around the windows to grab for resizing (although i thought the new resize grip solved any big issues). This annoys me because it destroys the usefulness of the grid plugin of compiz.. i'm not sure if the border is part of compiz or gnome, but i'd like to know how to disable it. i couldn't find any options in ccsm or the window settings in gnome. See the screenshot to see how much waste is caused. These windows should match up instead of having blank space surrounding all of them.

    Read the article

  • mic on cam don't work

    - by ezz9
    the cam works. I pull up PulseAudio I can see it pick me up for 1sec then stops. don't work on Skype I've tried every USB port same thing it worked on 10.04 fine. but now I'm on 12.04 and it don't work. it is a logitech B500 desktop:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 046d:0807 Logitech, Inc. Webcam B500 Bus 003 Device 002: ID 03f0:6104 Hewlett-Packard DeskJet 5650c Bus 005 Device 002: ID 046d:c51b Logitech, Inc. V220 Cordless Optical Mouse for Notebooks I have changed some setting in flash Player Settings Manager, I don't think it would affect it after all the cam is still working it's the microphone that freezes up, but thought I would tell you this, info is good.

    Read the article

  • Keyboard layout issues using Ubuntu 12.04 in ssh via X11 for mac

    - by LostInTranslation
    I just upgraded from 10.04 LTS to 12.04 LTS on my server (DELL Intel XEON). By SSH login from my mac (OS X Lion) everything is fine (no issues with command lines) but when I open a window through X11, the keyboard layout is now completely messed up. As an owner of a french mac keyboard, I got used to such issues and could deal by guessing the "QUERTY" keys, but this time it's worse. To fix it, I tried: 1/ sudo dpkg-reconfigure keyboard-configuration = no effect 2/ sudo gnome-control-center then change the keyboard settings, however adding a couple of keyboard layouts did not change anything. I feel there is something to do with the X11 forwarding. Any hints? Thanks

    Read the article

  • Wireless Connection Troubles

    - by James
    I just recently switched from Windows 7 over to Ubuntu 12.04 and have been experiencing some issues connecting to my home's wireless network. The only way I can get it to connect to the network is by disabling IPv4 and IPv6 settings. Even then while it says its connected to the network (3 bars), I'm unable to access the Internet. It connected for a little while after I first installed Ubuntu, but after the first reboot I haven't been able to access the web at all. I have very basic knowledge when it comes to computers and barely any when dealing with Ubuntu and Linux. I'm very happy with Ubuntu apart from this one issue, as before my computer was overheating and crashing, I've yet to experience any of those problems since installing Ubuntu. The information I can give may be very limited since I'm having to use my cell phone to figure out the solution to this. Any help would be greatly appreciated. Thanks in advance!

    Read the article

  • How to control fan speed and temperatures on Asus A8Js laptop running Ubuntu Server?

    - by Azeworai
    Hi, I have tried installing asusfan and lm-sensors but I'm unable to control my fans to cool my laptop down sufficiently. Currently it overheats at about 100 degrees celsius and my sensors output somehow does not have any fan information on it: jackson@OLYMPIA:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +69.0°C (crit = +110.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +66.0°C (high = +100.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +66.0°C (high = +100.0°C, crit = +100.0°C) I have checked my bios and there isn't any fan settings there. I can consistently overheat just by converting a video via Handbrake. I have ubuntu-desktop installed for a GUI. Is there a way for me to control my fans to start spinning before it reaches a critical temperature and kills itself?

    Read the article

  • How can I set parameters in Google webmaster tools so that my dynamic content is indexed?

    - by Werewolf
    I have read questions about URL parameters in Google Webmaster Tools in this site and the Google Webmaster Help Center but I have a problem. My site searches in the database and show some information. These two URL display some data: http://mydomain.com/index.aspx?category=business http://mydomain.com/index.aspx?category=graphic&City=Paris In URL parameter section, I can only define parameter category, how Google can detect proper values (business, graphics, real estate...)? Every word is not valid for search. If My page name is default.aspx or anything else, where I should define it? If I use URL rewriting like http://mydomain.com/search/category/business, my settings must change?

    Read the article

  • Sharing samba-folder with root access

    - by Industrial
    Hi everyone, I have a staging server in my network running Ubuntu server 10.10, being my main development area. As I need to access the files in the Apache root from other computers in the network, I have setup samba with the following settings: [www] comment = Apache root www path = /var/www writable = yes force user = root force group = root On the host computer, running Ubuntu 10.10 desktop, I am trying to mount the drive with a bash file looking like below: #!/bin/bash sudo mount -t cifs //192.168.1.5/www /media/www/ -o username=myusername,password=mypassword,rw,iocharset=utf8,file_mode=0777,dir_mode=0777 What happens is that I get mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) thrown in my face whilst trying to execute the mount. I've done exactly the same, with exactly the same smb.conf & mount-bash file on another computer in my network, but this just wont work. What am I doing wrong? I am running out of ideas.

    Read the article

  • Screen Scaling Problem

    - by Glenbot3000
    I think this is what it's called but I'm not quite sure tbf, aha. Yeah, so I updated packages last night like I do every night, and when I booted my computer this morning I had a problem whereby the display ran over the edge of the screen. This has been a problem for a while, but I rectified it by changing a setting on the nVidia program, however I think it has been updated to remove said feature as I can't find it anymore. I have no settings on my screen to adjust this either, so I'm sorta stuck without the ~20px around the contour of my screen. It is a problem at all available resolutions. Here's a lil' pic of my problem: https://docs.google.com/file/d/0ByPHeBI8W35GcmZYOThWZ0hGd0k/edit Edit: Probably also worth mentioning the screen was originally detected as "Laptop" in the Display setting and had many resolutions to choose from, however now it's displayed as "OEM" and only has three.

    Read the article

  • How to layout application icons in the panel?

    - by Vincenzo
    Hello everybody, Application and applets icons are changing their position or even disappears from the gnome-panel (see an example). It often happens after connecting to external monitor with different resolution setting, or sometimes happens by chance (I don't know what is the reason of such behaviour). Some icons I can move, others I can't. I don't know if they're locked or not. My question is: Is there any settings/software for icon's position control in the panel? I noticed that locking does not resolve this issue. Thank you for support.

    Read the article

  • Which Compiz plugins can I safely disable?

    - by Sheldno
    On 11.10, which Compiz plugins are enabled by default? I.e. I should leave them enabled for some particular reason. I've imported my Compiz settings from my previous install and so I can't tell. I'd like to disable all unnecessary plugins because I've noticed the potential for interference or performance issues. I don't think I can trust the CCSM feature "Reset to defaults" because when I use it I need to run unity --reset afterwards in order for my desktop to work again (implying that the default values it resets to are not the values that Ubuntu/Unity requires).

    Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >