Search Results

Search found 9091 results on 364 pages for 'thinking'.

Page 257/364 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

• Providing access to a Samba server for VPN clients

  - by Kamil Kisiel

  We have some Windows users that connect to our network via VPN from home. They need to be able to connect to our Samba server and access a mapped network drive just as they do as when they are on our LAN. The complication is that VPN clients are placed on a subnet other than our office LAN, and behind a firewall. What's the easiest way for me to allow them to still connect to the network share? The solutions I've currently seen involve setting up a WINS server for name resolution purposes and then tunnelling a bunch of the NetBIOS stuff through the firewall. However that means I'd have to set up the VPN DHCP server to hand out the WINS address, something I'm not even sure is possible on the Cisco hardware we have. I'm thinking there must be an easier way. Should I use an LMHOSTS file? Or just map by IP address? Also, I'm not terribly familiar with Windows networking, so which ports would I need to pass through my firewall in order to get the file sharing through?

  Read the article

• Checksum for Protecting Read-Only Documents

  - by Kim

  My father owns a small business and has to hand over several year's worth of financial documents to his insurance's auditor. He's asked me to go through and make sure everything is "read-only" so the data (the files) absolutely, positively cannot be modified or manipulated (he's a bit paranoid). We're talking about 20,000 documents (emails, spreadsheets, etc.). My first inclination was to place everything inside of one root folder ("mydadsdocs/") and then write a script that recursively traversed its directory subtree and set the file permissions to read-only. But then I got to thinking: that's a lot of work for me to do to satisfy an old man who is just being paranoid, and afterall, if someone really wanted to modify a read-only file, it would be pretty easy to change file permissions anyways, soo.... Is there like a checksum I could run on the root folder, something that was very quick and easy, and that would basically "stamp" the data in that folder so if someone did change it, my father would have someone of knowing/proving it? If so, how? If not, any other recommendations that are quick, cheap (free) and effective?

  Read the article

• Mainboard shuts itself off after half a second or so

  - by heishe

  Here's the problem: When I start the PC, the mainboard powers up, then stays that way maybe 0.2-0.5 seconds, and then shuts off again. I say mainboard, and not PC, because I removed all the parts from the system and disconnected everything but the mainboard power supply (the broad 12 pin thingy). When I have the other parts (cpu, graphics card, ram, etc.) installed and connected, the basic behaviour stays the same, but now the mainboard runs for about 6 or 7 seconds (this is a guess) before shutting off. This all started when my monitor wouldn't receive a video signal today, without giving POSTs, so I took the graphics card and the RAM out to see if it changes anything. It didn't, except that from that point on the mainboard would start to have this behavior where it just stays on for a very short time and then shuts off again. I already tested it with a backup PSU - same behavior. What could this be? I'm thinking it can't be on a physical level (transistors burned through or something like that), since then the mainboard either shouldn't start at all or it should detect hardware failures in non-essential parts of the syste and start beeping. Sorry, I forgot to mention. It's an MSI P67A-C43. I already checked the capacitors if someone popped, but I can't find anything. I also tried resetting the cmos, but that didn't change anything.

  Read the article

• Please advise on VPS config choice (with SQL Server Express)

  - by tjeuten

  Hi all, I might be interested in getting a VPS hosting plan for some small personal sites and .NET projects. Was thinking of Softsys Bronze Plan, as my current shared host plan is with them too. The stuff I want to host has grown beyond the capabilities of a Shared hosting plan, and I also want more control over the IIS/ASP.NET configuration, that's why I'm considering VPS. The main config details would be: Hyper-V 30 GB of diskspace 1 GB of RAM More info here: http://www.softsyshosting.com/Windows-VPS-HyperV.aspx Does anyone have experience with this plan (or something similar from another host), and maybe could answer these couple of questions: Bronze has a total diskspace of 30GB. Is the OS part of this quota or not ? If so, how much does a base configuration with Windows 2008 take up in diskspace ? Would you advise Windows 2008 R2 or Normal. Or would you advise to use Windows 2003 with this config. I'm planning on running a SQL Server Express install too. Would 1 GB of RAM be enough for both the Windows 2008 (R2) and SQL Express. The database load will not be that very high (a couple of 1000 records returned each day). The DB will most likely be far away from the 4GB limit, that's why I'd go for a SQL Express instead of paying extra licensing costs for a SQL Web install. But I'm more concerned about performance. Would you recommend Softsys as a VPS host ? I've been with them for one year for my Shared hosting plan, and have no complaints so far. Also, as I have no VPS experience, what are the pitfalls I need to be aware of, in terms of performance mainly, but maybe in other areas too ? Mathieu

  Read the article

• Why does just splitting an Ethernet cable not work?

  - by Sin Jeong-hun

  I thought the Ethernet is logically a one-line communication bus (for argument's sake, I am excluding hubs). All machines attached on the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why would splitting one Ethernet line from my home router into two and connecting two computers not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room, and I had put a computer in another room (also my room, though). Since a wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

  Read the article

• Help Email Account Management among multiple users

  - by CogitoErgoSum

  So I preface this with saying this may belong in IT Security, not too sure feel free to move. Currently we have an email account [email protected] - hosted via google apps (as is all our email). We had an incident where we had to terminate an employee. This employee however had the password for this account as we have 20-30 people utilizing it at any given point to manage customer emails etc. Thinking on this I feel there must be a better way to manage access. With Google you can associate upto 10 email accounts to another the problem is we have more like 20-30 people going. We were evaluating tools such as SalesForce and Assistly where people have their own login credentials and then the system contains the appropriate smtp information for the [email protected] email address to send emails from it rather than a users personal account. Aside from those options does anyone have any other thoughts? One suggestion floated was moving everyone to desktop clients and saving the PW info there so they could only login from their physical workstation but we may have situations where we'd like employees to work remotely. Does anyone have experience with this sort of system where ~20-30 people are responding from one email box and how to manage security and access?

  Read the article

• Windows service runs file locally but not on server

  - by Ben

  I created a simple Windows service in dot net which runs a file. When I run the service locally I see the file running in the task manager just fine. However, when I run the service on the server it won't run the file. I've checked the path to the file which is fine. I also checked the permissions on the folder and file, and they fine as well. Also there are no exceptions happening. Below is the code used to launch the process which runs the file. I posted this first on stack overflow, and some people were thinking this is a config issue, so I moved it here. Any ideas? try { // TODO: Add code here to start your service. eventLog1.WriteEntry("VirtualCameraService started"); // Create An instance of the Process class responsible for starting the newly process. System.Diagnostics.Process process1 = new System.Diagnostics.Process(); // Set the directory where the file resides process1.StartInfo.WorkingDirectory = "C:\\VirtualCameraServiceSetup\\"; // Set the filename name of the file to be opened process1.StartInfo.FileName = "VirtualCameraServiceProject.avc"; // Start the process process1.Start(); } catch (Exception ex) { eventLog1.WriteEntry("VirtualCameraService exception - " + ex.InnerException); }

  Read the article

• Howto: SaaS / PHP Application / Tenants / Security

  - by Ben Fransen

  Hi all, Being completely new in the webhostingcorner I have a few questions on how to implement/setup a webserver for a SaaS application. I'm about to rent my own server for a new product (CMS) I'm launching in two months. Developing the system wasn't that much of wild ride to me, but a correct way to implement it, is. So lets say this is my situation: I want to host 10 websites for 8 clients. There are 6 single sites, and two clients have two websites they can manage with my software. The CMS must be placed on the server too, all clients are connecting to 1 system The database must be placed Depending on the contract a client makes, the client gets some storage. How to measure the used storage over the DB, FileSystem and email Clients may not, in any case be able to somehow get outside their directory, but from the CMS directory the CMS must be able to create files and dirs in a clients directory (for templates, imagegalleries, widgets, etc, etc). I was thinking about something like a dirstructure like this: ./CMS/ [all CMS files] ./Websites/*/ [all websites] My hostingprovider will install updates to the os (CentOS, latest) and the admin panel (Direct Admin). Is there anybody with experience on this topic? Or do you have some thoughts about it? please join the conversation since I'm completely new to this. Ben

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

• Redundant OpenVPN connections with advanced Linux routing over an unreliable network

  - by konrad

  I am currently living in a country that blocks many websites and has unreliable network connections to the outside world. I have two OpenVPN endpoints (say: vpn1 and vpn2) on Linux servers that I use to circumvent the firewall. I have full access to these servers. This works quite well, except for the high package loss on my VPN connections. This packet loss varies between 1% and 30% depending on time and seems to have a low correlation, most of the time it seems random. I am thinking about setting up a home router (also on Linux) that maintains OpenVPN connections to both endpoints and sends all packets twice, to both endpoints. vpn2 would send all packets from home to vpn1. Return trafic would be send both directly from vpn1 to home, and also through vpn2. +------------+ | home | +------------+ | | | OpenVPN | | links | | | ~~~~~~~~~~~~~~~~~~ unreliable connection | | +----------+ +----------+ | vpn1 |---| vpn2 | +----------+ +----------+ | +------------+ | HTTP proxy | +------------+ | (internet) For clarity: all packets between home and the HTTP proxy will be duplicated and sent over different paths, to increase the chances one of them will arrive. If both arrive, the first second one can be silently discarded. Bandwidth usage is not an issue, both on the home side and endpoint side. vpn1 and vpn2 are close to each other (3ms ping) and have a reliable connection. Any pointers on how this could be achieved using the advanced routing policies available in Linux?

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• Printing to a remote printer through the internet

  - by Lock

  I have a remote network (A) that is connected to a head office (B) through a private network. Network A only has 1 PC that requires the connection, and this is into a terminal server at network B. We want to save money by getting rid of the private network as only 1 PC now access it and it seems silly to pay ~$400 per month for something that is accessed by 1 PC. A VPN tunnel is out of the question as the provider wants to charge $600 a month for a VPN tunnel (more than a private network? I might get them to check these numbers). I was thinking of 2 options: 1) VPN client on the PC. This wouldn't cost a thing as we already have VPN users available. 2) Open up a port on the firewall of network B, forwarding to the terminal server. Now the problem is this: On the terminal server, the program that is accessed is for printing labels to the printer that is at network A. The program is setup to send all print jobs to a printer that is setup locally on the terminal server, which has its port mapped to the IP address of the printer that is at network A. If we got rid of the VPN tunnel and used clients/open up firewall port, the printer would no longer be able to find network A, and hence printing would not work. Any ideas to combat this issue? Can the printers at the remote network be setup as internet printers? I've never had any experience with internet printers. Can you open up ports and map to a public static IP address?

  Read the article

• Advice needed: warm backup solution for SQL Server 2008 Express?

  - by Mikey Cee

  What are my options for achieving a warm backup server for a SQL Server Express instance running a single database? Sitting beside my production SQL Server 2008 Express box I have a second physical box currently doing nothing. I want to use this second box as a warm backup server by somehow replicating my production database in near real time (a little bit of data loss is acceptable). The database is very small and resources are utilized very lightly. In the case that the production server dies, I would manually reconfigure my application to point to the backup server instead. Although Express doesn't support log shipping natively, I am thinking that I could manually script a poor man's version of it, where I use batch files to take the logs and copy them across the network and apply them to the second server at 5 minute intervals. Does anyone have any advice on whether this is technically achievable, or if there is a better way to do what I am trying to do? Note that I want to avoid having to pay for the full version of SQL Server and configure mirroring as I think it is an overkill for this application. I understand that other DB platforms may present suitable options (eg. a MySQL Cluster), but for the purposes of this discussion, let's assume we have to stick to SQL Server.

  Read the article

• What is the correct mail set up for multiple domains on one server?

  - by newmarc

  I have a machine (centos 5) with one external ip address. On that machine I have many virtual hosts with a few different top level domain names and sub-domains under those eg. sub1.domain1.com sub2.domain1.com sub3.domain1.com sub1.domain2.com sub2.domain2.com sub1.domain3.com And so on... Alot of these different sites need to send mail as their corresponding domain (or second-level domain at least). I need to set up DKIM, SPF (but that's handled on the DNS) and rDNS lookup so the mail gets received. As I understand it, you can only have one rDNS entry per machine. I could set up a server for each top level domain, but I'm thinking that'll get expensive. What should I do here? Is there a way to have multiple rDNS lookups on one ip address? How do I setup DKIM signing for multiple domain names on the one machine? Are there any services out there that could handle this for me? Thanks for your help...

  Read the article

• Computer causing WiFi interference?

  - by Mannimarco

  I came back from college and brought my desktop computer. Family recently switched to Verizon FIOS and got a new router because of it. Unfortunately, my connection to the new wifi network is awful, with the download speeds (tested through speedtest.net) fluctuating wildly and often dropping below 1.5 Mbps. A laptop in the same room gets 20 Mbps. I've tried a new wireless card, thinking that mine got damaged in the move home but no luck. Here's where it gets weird: if I place the laptop near the computer, the laptop's download speeds often suffer greatly. Pulling the laptop away always fixes this. So now I'm under the impression that there's something in the computer (which I built a year ago and has had 0 issues up to this point) is causing an insane amount of wireless interference. Also bizarre: the upload speeds seem unaffected by this problem. On the laptop and desktop, upload speeds are generally around 5 Mpbs. Any ideas as to what could be causing this and how to test said theories would be fantastic.

  Read the article

• What GPT partition type to use for protecting DRBD metadata?

  - by Carsten Scholtes

  I'm planning to install a DRBD device on a (replicated) disk with two GPT partitions. DRBD requires some space for (preferentially "internal") metadata at the end of the underlying device. I'm hesitant to leave this space unpartitionend (or unformatted in a normal partition). I'd like to reserve an extra partition at the end of the underlying disk device for the metadata. (If I understand correctly, DRBD would not care about the partition or its type and could then use that space exclusively.) My question is: Which would be a suitable GPT partition type for such a metadata partition? It should not be a type interpreted while booting (such as EF00 EFI System). It should not be a type prone to be modified accidentialy by the booted OS (such as 8200 Linux swap, 8e00 Linux LVM, fd00 Linux raid). (The booted OS will be Ubuntu Linux 12.04.3.) It should not be a type indicating a normal filesystem (such as 0c01 or 8301), prone to be formatted correspondingly. It should not be a type requiring any special content in the partition (since the content is to be handled exclusively by DRBD). It should express the purpose of being reserved for something special (namely DRBD). (The types I listed are as provided by gdisk. I'm thinking about using some type unlikely to be used by the OS (maybe bf0a Solaris Reserved 4) or an invented(?) type such as fd01 (close to fd00 Linux raid…). Would something like this be suitable, too dangerous or even possible?)

  Read the article

• SSL setup: UCC or wildcard certificates?

  - by quanza

  I've scoured the web for a clear and concise answer to my SSL question, but to no avail. So here goes: I have a web-service requiring SSL support for authentication pages. The root-level domain does not have the "www" - i.e., secure://domain.com - but localized pages use "language-code.domain.com", i.e. secure://ja.domain.com So I need at least a wildcard SSL certificate that supports secure://*.domain.com However, we also have a public sandbox environment at sandbox.domain.com, which we also need to support under localized domains - so secure://ja.sandbox.domain.com needs to also work. The previous admin managed to purchase a wildcard SSL certificate for .domain.com, but with a Subject Alternative Name for "domain.com". So, I'm thinking of trying to get a wildcard certificate with SANs defined as "domain.com" and ".*.domain.com". But now I'm getting confused because there seem to be separate SAN certificates, also called UCC certificates. Can someone clarify whether it's possible to get a wildcard certificate with additional SAN fields, and ultimately what the best way is to support: secure://domain.com secure://.domain.com secure://.*.domain.com with the fewest (and cheapest!) number of SSL certificates? Thanks!

  Read the article

• Windows 2008 R2 AWS CloudFormation Elastic beanstalk configuration

  - by Webmonger

  I'm looking for some configuration advice. I have a need for a load balanced windows environment with shared media across all instances that are hosting the app. The best explanation i can give is that there will be multiple Windows 2008 server with IIS hosting the app going through an ELB to load balance. Users must be able to upload content (images, video etc...) to the site that will be hosted. When a user uploads media it needs to be kept on a shared location so all windows IIS instances can access the files, I can't host the files on S3 because of the app architecture so they need to be in a place where all IIS server will have access. In addition I need to run an update each IIS server instance that updates a local memory cache when SQL data is updated. I was thinking of a configuration like this: [ELB] - [Win 2008 IIS (multiple servers)] - [Win 2008 File & SQL Server(possibly RDS?)] Does this configuration make sense? If not could you provide an idea of how I should configure it. Thanks in advance

  Read the article

• how to design pound -> varnish -> jboss for ha + loadbalancing

  - by andreash

  Hello, I'm planning a new infrastructure for our web application. We have two JBossAS5 servers, running in a cluster. Session state will be replicated via JBoss Cache. In front of that, there should be some cache, to speed up delivery of static elements. However, most of the traffic to our app will be via HTTPS. So far, I had been thinking of two Varnish caches in front of the JBossASs, each being configured for loadbalancing to the two JBossASs via round-robin. Since Varnish doesn't handle HTTPS, then there would need to be two pound proxies in front of the Varnishs, dealing with the HTTPS. The two pounds would be made high-available with Heartbeat/LinuxHA. The traffic to www.example.com would then be going through our firewall, from there to the virtual IP of the pounds, from there to the Varnishs, and from there to the JBossASs. Question 1: Does this make sense? Or is it overly complicated, and the same goal can be reached with simpler methods? Question 2: If my layout is fine, how do I configure the pound - Varnish step? Should I a) make the Varnish service high-available through Heartbeat/LinuxHA as well and direct traffic from pound to the virtual IP of the Varnishs, or should I rather b) Configure two independent Varnishs and use load-balancing in pound to address the different Varnishs? Thanks a lot for your insight! Andreas.

  Read the article

• Mac OS X software always order files alphabetically rather than by type.

  - by george

  I have noticed many Mac applications sort the files alphabetically rather than by type. A good example would be Coda by panic.com. The files in the file menu are organized alphabetically. I requested for them to add the feature to organize files by type, and they've said that it's a Finder thing. So I looked at other applications to see if they were organizing by type. I noticed Dreamweaver CS4 had this same problem and now including Dreamweaver CS5. There has to be something in the Mac that does this and that I can modify. I played with Spotlight and it now displays its files by type (thinking that's what I can do) but it didn't take effect in other applications. What library are these applications using to display a file menu for their files? here is an example-- file menu layout of coda by panic.com. (i couldnt post another link because it wouldnt let me). can you see how everything is organised alphabetically rather than by folder? i just want the file menu to show all folders first then all the files. 1) http://www.iaddesign.com/coda.png there must be a way to modify mac to let me to do this.

  Read the article

• who has files open on a linux server

  - by Robert

  I have the fairly common task of finding who has files open on our Linux (Ubuntu ) file server in our Windows environment. We use Samba on the network and I use Putty from my workstation to establish a shell window to run bash scripts. I have been using something like this to find what files are open: (this returns a list of process ids with each open file) Robert:$ sudo lsof | grep "/srv/office/some/folder" Then, I follow up with something like this to show who owns the process: (this returns the name of the machine on the network using the IP4 protocol who owns the process) Robert:$ sudo lsof -p 27295 | grep "IPv4" Now I know the windows client who has a file open and can take action from there. As you can tell this is not difficult but time consuming. I would prefer to have a windows application I can run that would just give me what I want. So, I have been thinking about creating some process I can run on Linux that listens on a port and then returns a clean list of all open files with the IP address of the host who has the file open. Then, a small windows client application that can send the request on the port. It seems like this should be a very common need but I can not find anything like this that has been done before. Any suggestions?

  Read the article

• How to achieve the following RTO & RPO with logshipping only using SQL Server?

  - by Jimmy Chandra

  Trying to come up with viable backup restore & logshipping solution for achieving the following: 15 minutes Recovery Point Objective (no more than 15 minutes data loss at any time) 5 minutes Recovery Time Objective (must be able to get the db up and running back by 5 minutes) Considering using logshipping only (which I think is kind of pushing it, but I want to know if anyone else know how to achieve this). Some other info for consideration: Using 40 Gbit / sec fiber channel between the primary and disaster recovery (DRC) sites The sites are about 600 km apart. At close of business, the amount of data generated is predicted to be about 150 MB/sec. Log backup is planned for every 5 min. Doing some rough calculation I came up w/ the following numbers: 40 Gbit / sec = 5 MB / sec @ 100% network efficiency. 5 MB / sec = 300 MB / min. @ 300 MB / min, the total amount of data that can be transfer considering the 5min RTO is about 1.5GB, but that will left no time for the actual backup and restore, so if we cut it down to 3min logshipping time, which equals to ~900 MB over 3 minutes at 100% network efficiency, that will left about 1 min backup time and 1 minute restore time. Currently don't have any information if the system being used is capable of restoring 900 MB in 1 min, but assume it can. for COB scenario... 150 MB/sec, and considering the 3 min logshipping time, which should equal to about 27 GB of data over 3 mins...??? I think this is where the SLA will break... since there is no way to transfer 27 GB of data over a 40Gbit/sec line in 3 min. Can I get someone else opinion? I am thinking database mirroring might be a better answer for this...

  Read the article

• MySQL Master-Master w/ multiple read slave cost effective setup in AWS

  - by Ross

  I've been evaluating Amazon Web Services RDS for MySQL and costing out potential scenarios involving a simple multi-AZ deployment read/write setup vs. a multi-AZ deployment mysql master (hot-standby) with additional read-only slaves. the issue I'm trying to cost-optimize includes their reserved instance vs on-demand instances. Situation 1: purchase reserved multi-az setup for Extra-large-hi-mem(17GB RAM) instance for $5200/yr and have my application query the master all the time. the problem is, if I don't need all the resources of the (17GB RAM) all the time and therefore, especially not a hot-standby, what alternatives for savings can a better topology create, like potentially situation 2 below: Situation 2: purchase reserved multi-az setup using smaller master instances than above for the master-master hot-standby to receive the writes only. Then create and load balance several read-only slaves off the master and add/remove and/or scale up/down the read slaves based on demand. This might only cost $1000 + the on-demand usage of the read slaves. My thinking is, if I have a variable read-intensive application load, with low write load, the single level topology in situation 1 means I'm paying for a lot of resources at the write level of topology when I don't need them there. My hope is that situation 2 can yield cost savings from smaller reserved instances on the master-master resource level allowing me to scale up and down and/or out on the read-level according to demand as needed. Does anyone see a downside to doing this or know of some reason this isn't possible with RDS? Any other thoughts or advice always welcome of course. Thanks in advance, R

  Read the article

• Migrate Domain from Server 2008 R2 to Small Business Server 2011

  - by josecortesp

  I'm looking for some advice here, rather than the big how to do it I'm looking for what do to I have this home server, quad core and 4 GB of ram (I really can't afford more right now). With a Windows Serve 2008 R2 With ActiveDirectory and a Hyper-V-Virtual machine with SharePoint, TFS and a couple of more thigs. I have a least 10 remote users, all of them joined a Hamachi VPN (working great by the way). But I want to migrate that to a Small Business Server 2011 Standard. I tried to make a VM to join the domain and then promote that VM, back up it and then format the physical server, boot up the VM, Promote the Phisical and then erase the VM, but I can't do that because of SBS requiring a least 4 GB of ram to install (so I can't give all the 4 GB of physical ram to a VM). I was thinking in using a laptop (All the clients are laptop) as a temporal server, join the domain, promote it, then format the server and install SBS on the server and do all again. I really need some advice. Thanks in advance. BTW, I know that the software I'm using is kindda expensive, and I can't afford more hardware. I have access to MS downloads by a University partnership so I have all this software for free.

  Read the article

• New AD-DC in a new Site is refusing cross-site IPv4 connections

  - by sysadmin1138

  We just added a new Server 2008 (sp2) Domain Controller in a new Site, our first such config. It's over a VPN gateway WAN (10Mbit). Unfortunately it is displaying a strange network symptom. Connections to the SMB ports (TCP/139 and TCP/445) are being actively refused... if the connection is coming in on pure IPv4. If the incoming connection is coming by way of the 6to4 tunnel those connections establish and work just fine. It isn't the Firewall, since this behavior can be replicated with the firewall turned off. Also, it's actually issuing RST packets to connection attempts; something that only happens with a Windows Firewall if there is a service behind a port and the service itself denies access. I doubt it's some firewall device on the wire, since the server this one replaced was running Samba and access to it from our main network functioned just fine. I'm thinking it might have something to do with the Subnet lists in AD Sites & Services, but I'm not sure. We haven't put any IPv6 addresses in there, just v4, and it's the v4 connections that are being denied. Unfortunately, I can't figure this out. We need to be able to talk to this DC from the main campus. Is there some kind of site-based SMB-level filtering going on? I can talk to the DC's on campus just fine, but that's over that v6 tunnel. I don't have access to a regular machine on that remote subnet, which limits my ability to test.

  Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >