Search Results

Search found 7288 results on 292 pages for 'notification area'.

Page 258/292 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

  • Dynamic DNS with Comcast

    - by colithium
    I've just recently moved across town. Previously, I had Dynamic DNS set up so I could remotely connect to my desktop (primarily to use TightVNC). My ISP was Comcast and I'm in the Denver, Colorado area. Currently, I'm still with Comcast and still in Denver. My router connects to the internet just fine and my Dynamic DNS record over at DynDNS did get updated with my router's current external IP address. So my router, DynDNS, and public DNS records all agree what my IP address is. However, I can't actually connect to anything from the outside world. My trace route to Google looks something like: Tracing route to google.com [74.125.19.147] 1 3 ms 1 ms 1 ms 192.168.1.1 (this is the internal IP address of my router) 2 * * * Request timed out. 3 9 ms 8 ms 10 ms te-8-2-ur02.wheatridge.co.denver.comcast.net [68.85.221.177] 4 12 ms 12 ms 19 ms te-0-8-0-2-ar02.aurora.co.denver.comcast.net [68.86.103.97] 5 16 ms 13 ms 11 ms pos-0-3-0-0-cr01.denver.co.ibone.comcast.net [68.86.91.1] 6 28 ms 28 ms 27 ms pos-0-9-0-0-cr01.dallas.tx.ibone.comcast.net [68.86.85.174] 7 29 ms 27 ms 28 ms pos-0-1-0-0-pe01.1950stemmons.tx.ibone.comcast.net [68.86.86.94] 8 66 ms 108 ms * 75.149.231.70 9 65 ms 68 ms 93 ms 72.14.233.77 10 67 ms 66 ms 66 ms 72.14.233.111 11 67 ms 67 ms 69 ms 216.239.43.144 12 68 ms 71 ms 73 ms 209.85.249.30 13 66 ms 66 ms 68 ms nuq04s01-in-f147.1e100.net [74.125.19.147] This is what the trace route looks like from an outside source to my DynDNS domain name: traceroute to 98.245.67.65 (98.245.67.65) 1 illuminati-130 138.67.130.61 2 138.67.63.253 138.67.63.253 3 vermiculite 138.67.253.20 4 csm-ct-gw 138.67.253.244 5 138.67.253.2 138.67.253.2 6 ge-7-24-ar01.denver.co.denver.comcast.net 68.86.128.17 7 te-0-4-0-0-ar02.denver.co.denver.comcast.net 68.86.179.21 8 te-9-3-ur01.wheatridge.co.denver.comcast.net 68.86.103.18 9 * * * {Times Out} Now my guess is, whatever is sitting just beyond my router (what the modem connects to) is gumming things up. Even though the routes aren't EXACTLY the same, that appears to be the spot that the trace route either stops or doesn't get a response. My question is, for Comcast networks (particularly in Denver), what would be the device that typically sits there? Is there anything I can do about it? That device seems to not respond to PING but does forward it along when I'm going outwards. But it looks like it eats it when the request is coming in. It's hard to prove that from these logs but I'm assuming that's the case because my router used to accept connections from the outside and I haven't changed anything on it.

    Read the article

  • Postfix - Gmail - Mountain Lion // can't send mail

    - by miako
    I have read most of the tutorials found on google but still can't make it work. I run the command : date | mail -s "Test" [email protected] . The log is this : Oct 22 11:38:00 XXX.local postfix/master[288]: daemon started -- version 2.9.2, configuration /etc/postfix Oct 22 11:38:00 XXX.local postfix/pickup[289]: 9D85418A031: uid=501 from=<me> Oct 22 11:38:00 XXX.local postfix/cleanup[291]: 9D85418A031: message-id=<[email protected]> Oct 22 11:38:00 XXX.local postfix/qmgr[290]: 9D85418A031: from=<[email protected]>, size=327, nrcpt=1 (queue active) Oct 22 11:38:00 XXX.local postfix/smtp[293]: initializing the client-side TLS engine Oct 22 11:38:02 XXX.local postfix/smtp[293]: setting up TLS connection to smtp.gmail.com[173.194.70.109]:587 Oct 22 11:38:02 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: TLS cipher list "ALL:!EXPORT:!LOW:+RC4:@STRENGTH:!eNULL" Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:before/connect initialization Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:SSLv2/v3 write client hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=2 verify=0 subject=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA Oct 22 11:38:03 --- last message repeated 1 time --- Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=1 verify=1 subject=/C=US/O=Google Inc/CN=Google Internet Authority G2 Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=0 verify=1 subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=smtp.gmail.com Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server certificate A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server done A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write client key exchange A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write change cipher spec A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 flush data Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server session ticket A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: subject_CN=smtp.gmail.com, issuer_CN=Google Internet Authority G2, fingerprint E4:CA:10:85:C3:53:00:E6:A1:D2:AC:C4:35:E4:A2:10, pkey_fingerprint=D6:06:2E:15:AF:DF:E9:50:A5:B4:E2:E4:C5:2E:F9:BA Oct 22 11:38:03 XXX.local postfix/smtp[293]: Untrusted TLS connection established to smtp.gmail.com[173.194.70.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 22 11:38:03 XXX.local postfix/smtp[293]: 9D85418A031: to=<[email protected]>, relay=smtp.gmail.com[173.194.70.109]:587, delay=3.4, delays=0.26/0.13/2.8/0.26, dsn=5.5.1, status=bounced (host smtp.gmail.com[173.194.70.109] said: 530-5.5.1 Authentication Required. Learn more at 530 5.5.1 http://support.google.com/mail/bin/answer.py?answer=14257 s3sm54097220eeo.3 - gsmtp (in reply to MAIL FROM command)) Oct 22 11:38:04 XXX.local postfix/cleanup[291]: D4D2F18A03C: message-id=<[email protected]> Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: from=<>, size=2382, nrcpt=1 (queue active) Oct 22 11:38:04 XXX.local postfix/bounce[297]: 9D85418A031: sender non-delivery notification: D4D2F18A03C Oct 22 11:38:04 XXX.local postfix/qmgr[290]: 9D85418A031: removed Oct 22 11:38:04 XXX.local postfix/local[298]: D4D2F18A03C: to=<[email protected]>, relay=local, delay=0.11, delays=0/0.08/0/0.02, dsn=2.0.0, status=sent (delivered to mailbox) Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: removed Oct 22 11:39:00 XXX.local postfix/master[288]: master exit time has arrived I am really confused as i have never setup MTA again an i need it for local web development. I don't use XAMPP. I use the built in Servers. Can anyone guide me?

    Read the article

  • What are the steps to set up a Hyper-V solution with one NIC

    - by Cameron Aziz
    I have successfully installed centos on a virtual machine via Hyper-V on Windows Server 2008 R2. This server has one NIC. I have created a virtual NIC, and virtual subnet, and within the virtual machine (via console) I can ping the gateway. But not google. Is there certain steps I am missing, I feel like I'm one setting away. Im not sure what other information would be useful. Here is the ipconfig of the host: Ethernet adapter vNIC losangeles1_1: Connection-specific DNS Suffix .. : IPv4 Address. . . . . . . . . . . : 10.10.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix .. : IPv4 Address. . . . . . . . . . . : 72.51.43.43 Subnet Mask . . . . . . . . . . . : 255.255.255.192 Default Gateway . . . . . . . . . : 72.51.43.1

    Read the article

  • Google Apps e-mail being rejected from some domains

    - by Paul J. Lucas
    I'm migrating e-mail for my domains to Google Apps' e-mail. Most everything seems to work except e-mail sent to any user at (at least) sonic.net is rejected with a message of the form (where any-address has been substituted for my friend's address): From: Mail Delivery Subsystem <[email protected]> Date: March 11, 2010 10:04:48 AM PST To: [email protected] Subject: Delivery Status Notification (Failure) Delivered-To: [email protected] Received: by 10.229.194.26 with SMTP id dw26cs8717qcb; Thu, 11 Mar 2010 10:04:48 -0800 (PST) Received: by 10.223.68.143 with SMTP id v15mr3841599fai.62.1268330688325; Thu, 11 Mar 2010 10:04:48 -0800 (PST) Received: by 10.223.68.143 with SMTP id v15mr5119424fai.62; Thu, 11 Mar 2010 10:04:48 -0800 (PST) Mime-Version: 1.0 Return-Path: <> X-Failed-Recipients: [email protected] Message-Id: <[email protected]> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 5.1.1 <[email protected]>... No such user here (state 13). And here are the headers from the message it bounces back: Received: by 10.101.90.7 with SMTP id s7mr2515885anl.176.1267979929490; Sun, 07 Mar 2010 08:38:49 -0800 (PST) Return-Path: <[email protected]> Received: from [10.0.1.203] (adsl-76-201-171-194.dsl.pltn13.sbcglobal.net [76.201.171.194]) by mx.google.com with ESMTPS id 4sm1046550yxd.70.2010.03.07.08.38.48 (version=TLSv1/SSLv3 cipher=RC4-MD5); Sun, 07 Mar 2010 08:38:49 -0800 (PST) From: "Paul J. Lucas" <[email protected]> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Subject: Some fascinating subject Date: Sun, 7 Mar 2010 08:38:46 -0800 References: <[email protected]> To: [email protected] Message-Id: <[email protected]> Mime-Version: 1.0 (Apple Message framework v1077) X-Mailer: Apple Mail (2.1077) However, I am able to send mail to a user at sonic.net using my old e-mail account. Also, my company uses Google Apps for e-mail and I can send e-mail to a user at sonic.net from my company. The differences between my personal e-mail and my company's are: My company's domain has no SPF record whereas mine does. My company's domain has an A record whereas mine does not. My SPF record initially was as prescribed by Google here. However, this guy claims Google is wrong and gives a fix. I've tried it both ways with no difference. My SPF record is currently: v=spf1 mx include:aspmx.googlemail.com include:_spf.google.com ~all As for the lack of an A record, you wouldn't think that a mail host would care about that so long as mx records are defined. However, the funny thing is that if you look at the error message, why does Google state that the recipient's domain stated that there is "No such user here" for my address? That makes no sense. Of course there is no user having my address at sonic.net. Also, I assume that I just discovered that I can't send mail to users at sonic.net by accident and that there are probably other domains I can't send e-mail to. So... anybody have any idea what's going on? And how I can get mail to users at sonic.net?

    Read the article

  • Some DHCP clients end up with wrong DNS server

    - by Nic Waller
    The scenario: DC running Windows Server 2008 R2 providing DNS + DHCP Cisco 1811 Router as the gateway 30 Windows XP DHCP clients on the LAN The problem: Some workstations are spontaneously switching to an incorrect DNS server. Specifically, ipconfig /all shows that they start using the gateway as a DNS server. This happens about 5-10 times a day to various computers, sometimes more than once per day. The workaround: Repairing the connection on the XP client always fixes the problem, and the correct DNS server address is obtained. We lost our main DNS/DHCP machine a week ago, and had to bring this one online as a spare. We've been having this issue since then. DHCP leases on the old and new servers are configured for "wired" (8 day) duration. There are definitely no other DHCP servers active on the LAN. So far there is no discernible pattern about which clients will show this problem, or when. When I ran DCDIAG /test:DNS it came back clean. Manual inspection of the DNS zone shows that all the records are appearing as expected, with no traces of the previous machine in there. Update Feb 27: Added screenshots. Here is a screenshot of the DHCP scope options on the 2008 R2 server. And here is a screenshot of ipconfig /all running on a healthy host. I don't have any ailing hosts at the moment, but will grab a screencap next time it happens. Update Feb 28: More screenshots. Here's a screenshot of DHCP and DNS traffic from a healthy client when repairing the local area connection. There's definitely only one server responding, but it does seem strange that the negotiation takes place twice. I'll try to get a similar capture from a sick machine this coming week. Update Mar 01: Caught a bad ipconfig. Here's a screenshot of ipconfig /all from a client that had this issue. It says the lease was issued this morning, but it doesn't even have an entry for the secondary DNS I set up yesterday. Both DNS servers were discovered properly when repairing the connection. Update Mar 01: It even got the sysadmin! This issue finally affected my personal workstation this morning. Unfortunately I had just rebooted and wasn't running a packet dump at the time. I set up a secondary server yesterday, and was logging all DNS traffic to it. My machine had not contacted the secondary DNS in over half an hour, so that says to me that it's just spontaneously reverting to the gateway without even failing over to secondary DNS first. Today I swapped the order of the DNS servers in DHCP, so the secondary is primary and vice versa. I will update again once I know how that goes.

    Read the article

  • iPhone 3G refuses to transfer purchased apps to iTunes

    - by andynormancx
    My iPhone 3G refuses to transfer purchased apps to iTunes. This is causing me major problems with syncing. Whenever I attempt to transfer apps from the iPhone to iTunes it goes through the motions, but never actually transfers anything. It displays the various apps in the info area at the top of the screen, but the progress bar never advances. In comparison when I sync other iPhones, using the same install of iTunes, the progress bar advances and apps are transferred. The same also happens on clean installs of iTunes on other computers, it seems to be my iPhone that is the common factor. I have tried restoring the phone from a backup, which makes no difference. This started happening months ago and the phone has since been upgraded to 3.0 and 3.1, but the problem still persists. Originally it was just a minor irritation, but I made and attempt to fix it which has made things worse. I deleted all the apps from with iTunes and then did "Transfer purchases" in the hope that it might fix something. It didn't fix anything. Also, I cannot now sync at all. If I do sync iTunes now does "transferring purchases", fails to transfer and then deletes all the apps (and data) from my iPhone. It also means I can't sync music, podcasts or anything else. I can't sync anything else, because I can't temporarily turn off app syncing because then iTunes warns that the apps on the iPhone will be deleted. I also tried de-authorising and re-authorising. What can I do to get app syncing working again ? P.S. I have considered deleting all the apps and reinstalling them one by one, in the hope that it will fix the problem. However I don't really want to embark on doing that for 55+ apps and re-entering login details etc for the apps that need them, especially as I might then find out it didn't solve the problem. Update: The latest update to iTunes 9 has improved things in one key aspect. If I let a sync run to completion iTunes no longer deletes all the apps from my phone. So I can now sync all my other data, even if I still can't sync my apps. Resolved: See my answer to the question for how I finally resolved the problem.

    Read the article

  • Flash was "not designed to function across LANs". Any workarounds?

    - by Triynko
    See: http://helpx.adobe.com/flash/kb/problems-using-flash-authoring-across.html Issue When using Adobe Flash across a local area network (LAN) and networked drives/folders, you may experience any of the following problems:" Flash crashes while performing a test movie on FLA files located on a networked drive or folder. FLA files get corrupted when opening from or saving to networked drives or folder. Flash does not reflect changes in custom class after compiling. Flash, Flash Video Encoder, or Adobe Media Encodercrashes or corrupts Flash Video (FLV) files while encoding source located on networked drives or folder. Flash Video Encoder or Adobe Media Encoder crashes or corrupts FLV files where the output folder is a networked drive or folder. Published Flash Player (SWF) files and projectors are unable to load content located on networked drives or folder. More than one instance of a SWF or Projector on client machines cannot play back FLV files located on a networked drive or folder. Reason The Adobe Flash IDE, FLV Encoder, Adobe Media Encoderand Flash Player were not designed to function across LANs. Solution Use of Flash files across local networks is not supported in any context. Published content should access data through a web server. All file sources should be opened and saved on the local system. Using Flash in such a scenario for project collaboration or content deployment is highly discouraged and may corrupt your source files. If you need to work in a collaborative environment or store source files on a server, use the project panel and/or a third-party version control system. SERIOUSLY? I cannot work on files located on a mapped network drive? How did they mess that one up? Does the Flash IDE really open the source file and wipe it clean to do the saving, rather than saving a copy first then replacing it as an atomic file system operation? How hard would it be for them make a dummy temporary file for saving then issue a MOVE command? Any workarounds for this, like something that can make a network drive as stable as a local drive, like some kind of automatic local caching and synching?

    Read the article

  • OpenVPN, Great on Windows, VERY slow on Mac...

    - by Phsion
    Hello, I'm not really an IT Pro, but this seemed like the best place to ask this question... I have setup VPN networks in the past, for fun, and everything was great, but now I've set one up for my boss, and while my computers all work great, his Mac machines are almost too slow to work with. Its pretty much vanilla configs all around, anyone have any ideas? Its a TUN routing setup over UDP. Back Story: My boss travels a lot, and wants to be able to access all his files from the road, and is also pretty paranoid about security (even though knows almost nothing about computers). SO i figured a VPN would be the answer. I went with OpenVPN, but there are some other issues. The only ISP we can get in our area besides Dial-UP is a crappy Satellite provider, that doesn't offer public IPs unless your willing to pay, so while the computers and VPN setup are pretty vanilla, the routing and structure is strange to get around this limitation. Specs: Its OpenVPN2, and there are six machines using it (only three actually use it, the rest are my test machines), one Windows 7 laptop, two XP Desktops, one OS X 10.5 Desktop, one 10.6 Desktop, and one 10.6 Laptop. One XP Desktop sits at my house and acts as the server (6Mbs/2Mbs FIOS connection). One XP desktop sits at the office and hosts a webpage that will wake up the Main Mac Desktop from sleep, and also ping all the machines on the VPN and show their status. The main office mac (10.6) stays in sleep mode until it gets the Wake-On-Lan packet from the Office XP, and then it auto connects to the VPN and opens itself up. The reason for all this is the Satellite private IP crap means i cant directly access the office machines outside of the LAN, so everyone connects to my house first, then they talk to each other from there. The Wake On Lan weirdness is because my boss doesn't want to leave the main Mac on all the time, and making a quick and dirty webpage was the easiest way to send a Magic Packet from inside the LAN without confusing my boss. The VPN uses Client Config files to make static IPs for the client. The only thing i found in google was some changes to the VPN MTU settings (down to 1400) but no real help. Oh, and i forgot...all the windows machines just have OpenVPN start as a service. The Mac laptop uses tunnelblick (an OpenVPN GUI) and the Mac Desktops use OpenVPN in normal command line mode. Server Config: tun-mtu 1500 fragment 1450 mssfix 1450 management localhost #### port #### proto udp dev tun ca ####### cert ####### key ###### dh ###### server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-config-dir ccd route 10.8.0.0 255.255.255.252 client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status log Client Configs (all are simple variations on this) tun-mtu 1500 fragment 1450 mssfix 1450 client dev tun proto udp remote ######## #### resolv-retry infinite nobind persist-key presist-tun ca ##### cert ##### key ##### ns-cert-type server comp-lzo verb 3

    Read the article

  • How to grow to be global sysadmin of an organization?

    - by user64729
    Bit of a non-technical question but I have seen questions of the career development type on here before so hopefully it is fine. I work for a fast growing but still small organization (~65 employees). I have been their external sysadmin for a while now, looking after hosted Linux servers and infrastructure. In the past 12 months I have been transforming into the internal sysadmin for our office too. I'm currently studying Cisco CCNA to cover the demands of being an internal sysadmin and looking after the office LAN, routers, switches and VPNs. Now they want me to look after the global sysadmin function of the organization as a whole. The organization has 3 offices in total, 2 in the UK and 1 in the US. I work in one of the UK offices. The other offices are primarily Windows desktops with AD domain shops. My office is primarily a Linux shop with a file-server and NFS/NIS (no AD domain for the Windows desktops yet but it's in the works). Each other office has a sysadmin which in theory I am supposed to supervise but in reality each is independent. I have a very competent junior sysadmin working with me who shares the day-to-day tasks and does some of the longer term projects with my supervision. My boss has asked me how to grow from being the external sysadmin to the global sysadmin. I am to ponder this and then report back to him on how to achieve this. My current thoughts are: Management training or professional development - eg. reading books such as "Influencer" and "7 Habits". Also I feel I should take steps to improving communication skills since a senior person is expected to talk and speak out more often. Learn more about Windows and Active Directory - I'm an LPI-certified guy and have a lot of experience in Linux (Ubuntu or desktop, Debian/Ubuntu as server). Since the other offices are mainly Windows-domains it makes sense to skill-up in that area so I can understand what the other admins are talking about. Talk to previous colleagues who have are are in this role already - to try and get the benefit of their experience. Produce an "IT Roadmap" or similar that maps out where we want the organization to be and when, plotted out over the next couple of years with regards to internal and external infrastructure. I have produced a "Security roadmap" already which does cover some of these things. I guess this can summed up as "thinking more strategically"? I'd appreciate comments from anyone who has been through a similar situation, thanks.

    Read the article

  • Nagios notifications definitions

    - by Colin
    I am trying to monitor a web server in such a way that I want to search for a particular string on a page via http. The command is defined in command.cfg as follows # 'check_http-mysite command definition' define command { command_name check_http-mysite command_line /usr/lib/nagios/plugins/check_http -H mysite.example.com -s "Some text" } # 'notify-host-by-sms' command definition define command { command_name notify-host-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$ :Host$HOSTALIAS$ is $HOSTSTATE$ ($OUTPUT$)" } # 'notify-service-by-sms' command definition define command { command_name notify-service-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ ($OUTPUT$)" } Now if nagios doesn't find "Some text" on the home page mysite.example.com, nagios should notify a contact via sms through the Clickatell http API which I have a script for that that I have tested and found that it works fine. Whenever I change the command definition to search for a string which is not on the page, and restart nagios, I can see on the web interface that the string was not found. What I don't understand is why isn't the notification sent though I have defined the host, hostgroup, contact, contactgroup and service and so forth. What I'm I missing, these are my definitions, In my web access through the cgi I can see that I have notifications have been defined and enabled though I don't get both email and sms notifications during hard status changes. host.cfg define host { use generic-host host_name HAL alias IBM-1 address xxx.xxx.xxx.xxx check_command check_http-mysite } *hostgroups_nagios2.cfg* # my website define hostgroup{ hostgroup_name my-servers alias All My Servers members HAL } *contacts_nagios2.cfg* define contact { contact_name colin alias Colin Y service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s service_notification_commands notify-service-by-email,notify-service-by-sms host_notification_commands notify-host-by-email,notify-host-by-sms email [email protected] pager +254xxxxxxxxx } define contactgroup{ contactgroup_name site_admin alias Site Administrator members colin } *services_nagios2.cfg* # check for particular string in page via http define service { hostgroup_name my-servers service_description STRING CHECK check_command check_http-mysite use generic-service notification_interval 0 ; set > 0 if you want to be renotified contacts colin contact_groups site_admin } Could someone please tell me where I'm going wrong. Here are the generic-host and generic-service definitions *generic-service_nagios2.cfg* # generic service template definition define service{ name generic-service ; The 'name' of this service template active_checks_enabled 1 ; Active service checks are enabled passive_checks_enabled 1 ; Passive service checks are enabled/accepted parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems) obsess_over_service 1 ; We should obsess over this service (if necessary) check_freshness 0 ; Default is to NOT check service 'freshness' notifications_enabled 1 ; Service notifications are enabled event_handler_enabled 1 ; Service event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts notification_interval 0 ; Only send notifications on status change by default. is_volatile 0 check_period 24x7 normal_check_interval 5 retry_check_interval 1 max_check_attempts 4 notification_period 24x7 notification_options w,u,c,r contact_groups site_admin register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! } *generic-host_nagios2.cfg* define host{ name generic-host ; The name of this host template notifications_enabled 1 ; Host notifications are enabled event_handler_enabled 1 ; Host event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts max_check_attempts 10 notification_interval 0 notification_period 24x7 notification_options d,u,r contact_groups site_admin register 1 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! }

    Read the article

  • Courier Maildrop error user unknown. Command output: Invalid user specified

    - by cad
    Hello I have a problem with maildrop. I have read dozens of webs/howto/emails but couldnt solve it. My objective is moving automatically spam messages to a spam folder. My email server is working perfectly. It marks spam in subject and headers using spamassasin. My box has: Ubuntu 9.04 Web: Apache2 + Php5 + MySQL MTA: Postfix 2.5.5 + SpamAssasin + virtual users using mysql IMAP: Courier 0.61.2 + Courier AuthLib WebMail: SquirrelMail I have read that I could use Squirrelmail directly (not a good idea), procmail or maildrop. As I already have maildrop in the box (from courier) I have configured the server to use maildrop (added an entry in transport table for a virtual domain). I found this error in email: This is the mail system at host foo.net I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]>: user unknown. Command output: Invalid user specified. Final-Recipient: rfc822; [email protected] Action: failed Status: 5.1.1 Diagnostic-Code: x-unix; Invalid user specified. ---------- Forwarded message ---------- From: test <[email protected]> To: [email protected] Date: Sat, 1 May 2010 19:49:57 +0100 Subject: fail fail An this in the logs May 1 18:50:18 foo.net postfix/smtpd[14638]: connect from mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/smtpd[14638]: 8A9E9DC23F: client=mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/cleanup[14643]: 8A9E9DC23F: message-id=<[email protected]> May 1 18:50:19 foo.net postfix/qmgr[14628]: 8A9E9DC23F: from=<[email protected]>, size=1858, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/pickup[14627]: 1D4B4DC2AA: uid=5002 from=<[email protected]> May 1 18:50:23 foo.net postfix/cleanup[14643]: 1D4B4DC2AA: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/pipe[14644]: 8A9E9DC23F: to=<[email protected]>, relay=spamassassin, delay=3.8, delays=0.55/0.02/0/3.2, dsn=2.0.0, status=sent (delivered via spamassassin service) May 1 18:50:23 foo.net postfix/qmgr[14628]: 8A9E9DC23F: removed May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: from=<[email protected]>, size=2173, nrcpt=1 (queue active) **May 1 18:50:23 foo.netpostfix/pipe[14648]: 1D4B4DC2AA: to=<[email protected]>, relay=maildrop, delay=0.22, delays=0.06/0.01/0/0.15, dsn=5.1.1, status=bounced (user unknown. Command output: Invalid user specified. )** May 1 18:50:23 foo.net postfix/cleanup[14643]: 4C2BFDC240: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/qmgr[14628]: 4C2BFDC240: from=<>, size=3822, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/bounce[14651]: 1D4B4DC2AA: sender non-delivery notification: 4C2BFDC240 May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: removed May 1 18:50:24 foo.net postfix/smtp[14653]: 4C2BFDC240: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.211.97]:25, delay=0.91, delays=0.02/0.03/0.12/0.74, dsn=2.0.0, status=sent (250 2.0.0 OK 1272739824 37si5422420ywh.59) May 1 18:50:24 foo.net postfix/qmgr[14628]: 4C2BFDC240: removed My config files: http://lar3d.net/main.cf (/etc/postfix) http://lar3d.net/master.c (/etc/postfix) http://lar3d.net/local.cf (/etc/spamassasin) http://lar3d.net/maildroprc (maildroprc) If I change master.cf line (as suggested here) maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d ${recipient} with maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d vmail ${recipient} I get the email in /home/vmail/MailDir instead of the correct dir (/home/vmail/foo.net/info/.SPAM ) After reading a lot I have some guess but not sure. - Maybe I have to install userdb? - Maybe is something related with mysql, but everything is working ok - If I try with procmail I will face same problem... - What are flags DRhu for? Couldnt find doc about them - In some places I found maildrop line with more parameters flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d $ ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender} I am really lost. Dont know how to continue. If you have any idea or need another config file please let me know. Thanks!!!

    Read the article

  • Does a router have a receiving range?

    - by Aadit M Shah
    So my dad bought a TP-Link router (Model No. TL-WA7510N) which apparently has a transmitting range of 1km; and he believes that it also has a receiving range of 1km. So he's arguing with me that the router (which is a trans-receiver) can communicate with any device in the range of 1km whether or not that device has a transmitting range of 1km. To put it graphically: +----+ 1km +----+ | |------------------------------------------------->| | | TR | | TR | | | <----| | +----+ 100m+----+ So here's the problem: The two devices are 1km apart. The first device has a transmitting range of 1km. The second device only has a transmitting range of 100m. According to my dad the two devices can talk to each other. He says that the first device has a transmitting and a receiving range of 1km which means that it can both send data to devices 1km away and receive data from devices 1km away. To me this makes no sense. If the second device can only send data to devices 100m away then how can the first device catch the transmission? He further argues that for bidirectional communication both the sender and the reciver should have overlapping areas of transmission: According to him if two devices have an overlapping area of transmission then they can communicate. Here neither device has enough transmission power to reach the other. However they have enough receiving power to capture the transmission. Obviously this makes absolutely no sense to me. How can a device sense a transmission which hasn't even reached it yet and go out, capture it and bring it back it. To me a trans-receiver only has a transmission power. It has zero receiving power. Hence for two devices to be able to communicate bidirectionally, the diagram should look like: Hence, from my point of view, both the devices should have a transmission range far enough to reach the other for bidirectional communication to be possible; but no matter how much I try to explain to my dad he adamantly disagrees. So, to put an end to this debate once and for all, who is correct? Is there even such a thing as a receiving range? Can a device fetch a transmission that would otherwise never reach it? I would like a canonical answer on this.

    Read the article

  • PPTP VPN from Ubuntu cannot connect

    - by Andrea Polci
    I'm trying to configure under Linux (Kubuntu 9.10) a VPN I already use from Windows. I installed the network-manager-pptp package and added the VPN under Network Manager. These are the parameters under "advanced" button: Authentication Methods: PAP, CHAP, MSCHAP, MSCHAP2, EAP (I also tried "MSCHAP, MSCHAP2") Use MPPE Encryption: yes Crypto: Any Use stateful encryption: no Allow BSD compression: yes Allow Deflate compression: yes Allow TCP header compression: yes Send PPP echo packets: no When I try to connnect it doesn't work and this is what I get in the system log: 2010-04-08 13:53:47 pcelena NetworkManager <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'... 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 4931 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections 2010-04-08 13:53:47 pcelena pppd[4932] Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN plugin state changed: 3 2010-04-08 13:53:47 pcelena pppd[4932] pppd 2.4.5 started by root, uid 0 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN connection 'MYVPN' (Connect) reply received. 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. 2010-04-08 13:53:47 pcelena pppd[4932] Using interface ppp0 2010-04-08 13:53:47 pcelena pppd[4932] Connect: ppp0 <--> /dev/pts/2 2010-04-08 13:53:47 pcelena pptp[4934] nm-pptp-service-4931 log[main:pptp.c:314]: The synchronous pptp option is NOT activated 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 1, peer's call ID 14800). 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] LCP terminated by peer 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:929]: Call disconnect notification received (call id 14800) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:788]: Received Stop Control Connection Request. 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 4 'Stop-Control-Connection-Reply' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) 2010-04-08 13:53:48 pcelena pppd[4932] Modem hangup 2010-04-08 13:53:48 pcelena pppd[4932] Connection terminated. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:48 pcelena pppd[4932] Exit. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state changed: 6 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state change reason: 0 2010-04-08 13:53:48 pcelena NetworkManager <WARN> connection_state_changed(): Could not process the request because no VPN connection was active. 2010-04-08 13:53:48 pcelena NetworkManager <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001390] ensure_killed(): waiting for vpn service pid 4931 to exit 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001479] ensure_killed(): vpn service pid 4931 cleaned up The error that sticks out here is "pppd[4932] LCP terminated by peer". Does anyone has suggestion on what can be the problem and how to make it work?

    Read the article

  • VPN Connection causes DNS to use wrong DNS server

    - by Bryan
    I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site. When I do connect, I lose network access to shares on the network, including directories such as 'Application Data' that we have a folder redirection policy for. As you can imagine, this makes working on the PC very difficult, as desktop shortcuts stop working, software stops working properly due to having 'Application Data' pulled from under it. Our network is routed (10.58.5.0/24), with other local subnets existing within the scope of 10.58.0.0/16. The remote network is on 192.168.0.0/24. I've tracked the issue down to being DNS related. As soon as I open the VPN tunnel, all my DNS traffic goes via the remote network, which explains the loss of local resources, but my question is, how can I force local DNS queries to go to our local DNS servers rather than our customers? The output of ipconfig /all when not connected to the VPN is below: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled This is the output of the same command with the VPN tunnel connected: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local PPP adapter Customer Domain: Connection-specific DNS Suffix . : customerdomain.com Description . . . . . . . . . . . : CustomerDomain Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.85(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.0.16 192.168.0.17 Primary WINS Server . . . . . . . : 192.168.0.17 NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled Routing table Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.58.5.1 10.58.5.89 20 10.58.5.0 255.255.255.0 On-link 10.58.5.89 276 10.58.5.89 255.255.255.255 On-link 10.58.5.89 276 10.58.5.255 255.255.255.255 On-link 10.58.5.89 276 91.194.153.42 255.255.255.255 10.58.5.1 10.58.5.89 21 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 192.168.0.95 192.168.0.85 21 192.168.0.85 255.255.255.255 On-link 192.168.0.85 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.58.5.89 276 224.0.0.0 240.0.0.0 On-link 192.168.0.85 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.58.5.89 276 255.255.255.255 255.255.255.255 On-link 192.168.0.85 276 The binding order for the interfaces is as follows: I've not configured the VPN tunnel to use the default gateway at the remote end, and network comms to nodes on both networks are fine. (i.e. I can ping any node on our network or the remote network). I've modified the PPTP connection properties to use the DNS servers 10.58.3.32 followed by 192.168.0.16, yet the query still goes to 192.168.0.16. Edit: The local resources that disappear are hosted on domain DFS roots, which might (or might not) be relevant.

    Read the article

  • PHP 5.3 Not Logging

    - by BHare
    I have set error_log = "/var/log/apache2/php_errors.log" and made sure errors were being logged. I have set the file to be owned by the www-data owner and group and even set the permissions to 777. I have confirmed with phpinfo() that the error_log is correctly set, however The logging still only happens in my vhost's apache error log. The following is my php.ini for 5.3.3-7 on Debian Squeeze Apache 2: The top is populated with comments on what I have been interested, or have changed. I have deleted all comments to save space. Full versions here: http://pastebin.com/AhWLiQBR [PHP] ;short_open_tag = On ;allow_call_time_pass_reference = On ;error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED ;display_errors = On ;display_startup_errors = Off ;log_errors = On ;html_errors = On error_log = "/var/log/apache2/php_errors.log" engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = On safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED display_errors = On display_startup_errors = Off log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = On variables_order = "GPCS" request_order = "GPC" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 100M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_tmp_dir = /tmp upload_max_filesize = 100M max_file_uploads = 20 allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Pdo_mysql] pdo_mysql.cache_size = 2000 pdo_mysql.default_socket= [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [Interbase] ibase.allow_persistent = 1 ibase.max_persistent = -1 ibase.max_links = -1 ibase.timestampformat = "%Y-%m-%d %H:%M:%S" ibase.dateformat = "%Y-%m-%d" ibase.timeformat = "%H:%M:%S" [MySQL] mysql.allow_local_infile = On mysql.allow_persistent = On mysql.cache_size = 2000 mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_persistent = -1 mysqli.allow_persistent = On mysqli.max_links = -1 mysqli.cache_size = 2000 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [mysqlnd] mysqlnd.collect_statistics = On mysqlnd.collect_memory_statistics = Off [OCI8] [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 0 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] [ldap] ldap.max_links = -1 [mcrypt] [dba]

    Read the article

  • Installing Yaws server on Ubuntu 12.04 (Using a cloud service)

    - by Lee Torres
    I'm trying to get a Yaws web server working on a cloud service (Amazon AWS). I've compilled and installed a local copy on the server. My problem is that I can't get Yaws to run while running on either port 8000 or port 80. I have the following configuration in yaws.conf: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true This produces the following successful launch/result: Eshell V5.8.5 (abort with ^G) =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Using config file /home/ubuntu/yaws.conf =INFO REPORT==== 16-Sep-2012::17:21:06 === Ctlfile : /home/ubuntu/.yaws/yaws/default/CTL =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:8000 for <3> virtual servers: - http://domU-12-31-39-0B-1A-F6:8000 under /home/ubuntu/yaws/www/trial - =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:4443 for <1> virtual servers: - When I try to access the the url (http://ec2-72-44-47-235.compute-1.amazonaws.com), it never connects. I've tried using paping to check if port 80 or 8000 is open(http://code.google.com/p/paping/) and I get a "Host can not be resolved" error, so obviously something isn't working. I've also tried setting the yaws.conf so its at Port 80, appearing like this: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true and I get the following error: =ERROR REPORT==== 16-Sep-2012::17:24:47 === Yaws: Failed to listen 0.0.0.0:80 : {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Can't listen to socket: {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =INFO REPORT==== 16-Sep-2012::17:24:47 === application: yaws exited: {shutdown,{yaws_app,start,[normal,[]]}} type: permanent {"Kernel pid terminated",application_controller," {application_start_failure,yaws,>>>>>>{shutdown,>{yaws_app,start,[normal,[]]}}}"} I've also opened up the port 80 using iptables. Running sudo iptables -L gives this output: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- ip-192-168-2-0.ec2.internal ip-192-168-2-16.ec2.internal tcp dpt:http ACCEPT tcp -- 0.0.0.0 anywhere tcp dpt:http ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination In addition, I've gone to the security group panel in the Amazon AWS configuration area, and add ports 80, 8000, and 8080 to ip source 0.0.0.0 Please note: if you try to access the URL of the virtual server now, it likely won't connect because I'm not running currently running the yaws daemon. I've tested it when I've run yaws either through yaws or yaws -i Thanks for the patience

    Read the article

  • How can I simulate blocking RTMP over port 80 on Windows?

    - by Christian Nunciato
    It seems like this should be so simple, but since this isn't my area of expertise, I'm having a hell of a time figuring out how to do it. Basically, I have a Flash app and I'm connecting to a Flash Media Server to stream some content. The URL I'm using to do this, for example, looks like this: rtmp://someserver.com/some/path/mp3:somefile Everything works -- but that's sort of the problem. When I'm trying to do is simulate my users attempting to play back my media under more restrictive conditions than the ones I have here (i.e., none) -- namely being stuck behind firewalls or proxy servers that block access to RTMP streams. Flash, according to Adobe, is equipped to handle proxy servers and firewalls automatically, like so (from the docs): When you do not specify a port number in an RTMP address, Flash will attempt to connect to port 1935. If it fails it will then try to connect to port 443; if that fails, it will try port 80. [And if that fails, it will attempt to connect via RTMPT (i.e., HTTP tunneling) on port 80.] So no coding is required to access ports 1935, 443, or port 80 if you do not specify a port in the RTMP address. The problem I'm having is setting up a reliable environment in which to test that this behavior actually happens. I'm on a Windows machine, for example, so with Windows Firewall, I can block certain ports and protocols (1935, 443), but I don't want to block port 80, because the final fallback protocol (RTMPT) is supposed to run on port 80, and Windows Firewall only gives me enough granularity (as far as I know, anyway) to block "all outbound TCP traffic to remote port 80" -- that is, I can't, apparently, block "all outbound RTMP traffic to port 80" while leaving RTMPT traffic to port 80 unaffected. My understanding thus far is that I'll probably need to set up a proxy server to do this. Is this correct? Or is there a simpler way (on Win 7, at least) to filter out RTMP to 1935, RTMP to 443, RTMP to 80, but still allow RTMPT to 80 (where all four hostnames are identical)? And if I do have to set up a proxy server, what's the simplest way to go on Windows? I've set up WinProxy, which seems a bit janky but apparently works -- but then what I can't figure out is how to tell Windows to force all TCP traffic (including RTMP, RTMPT and HTTO) through this proxy server so I can turn around and reject the requests for RTMP. Any help would be hugely appreciated. This isn't my realm of expertise and I've alreasdy spent more time on it than I probably should. :)

    Read the article

  • OpenWRT based gateway with dnsmasq and internal server with bind

    - by Peter
    I have router based on OpenWRT which has dnsmasq 2.59. Inside my local area network I have a NS server bind. This server has internal and external views for a couple of my domains. My router forwards port 53 TCP and UDP from outside IP (router WAN) to this server. For the external clients everything works fine. In order to organize the internal view, I decided to add the exception to /etc/dnsmasq.conf server=/mydomain1.com/192.168.1.1 server=/mydomain2.com/192.168.1.1 server=/mydomain3.com/192.168.1.1 (192.168.1.1 - IP address of the NS server) According to dnsmasq manstrong text: More specific domains take precendence over less specific domains, so: --server=/google.com/1.2.3.4 --server=/www.google.com/2.3.4.5 will send queries for *.google.com to 1.2.3.4, except *www.google.com, which will go to 2.3.4.5 this domain name with all the sub-domains is supposed to be forward to my NS server. Everything works (SOA, NS, MX, CNAME, TXT, SRV etc.) except for A-record: # nslookup -type=a mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 *** Can't find mydomain1.com: No answer 192.168.1.100 - IP address of my router (dnsmasq) However, I can get the answer for the TXT-record query: # nslookup -type=txt mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 mydomain1.com text = "v=spf1 include:mydomain1.com -all" When I just specify the local IP of my NS server (direct access to the server without using dnsmasq) then the results are: # nslookup -type=a mydomain1.com 192.168.1.1 Server: 192.168.1.1 Address: 192.168.1.1#53 Name: mydomain1.com Address: 192.168.1.1 There is a similar situation with the MX-record: C:\>nslookup -type=mx mydomain1.com Server: router.lan Address: 192.168.1.100 mydomain1.com MX preference = 10, mail exchanger = mail.mydomain1.com mydomain1.com nameserver = ns.mydomain1.com mail.mydomain1.com internet address = 192.168.1.1 ns.mydomain1.com internet address = 192.168.1.1 C:\>nslookup -type=a mail.mydomain1.com Server: router.lan Address: 192.168.1.100 *** No address (A) records available for mail.mydomain1.com This is a dig result: # dig +nocmd mydomain1.com any +multiline +noall +answer mydomain1.com. 86400 IN SOA ns.mydomain1.com. hostmaster.mydomain1.com. ( 121204007 ; serial 28800 ; refresh (8 hours) 7200 ; retry (2 hours) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) mydomain1.com. 86400 IN NS ns.mydomain1.com. mydomain1.com. 86400 IN A 192.168.1.1 mydomain1.com. 604800 IN MX 10 mail.mydomain1.com. mydomain1.com. 3600 IN TXT "v=spf1 include:mydomain1.com -all" When I try to ping: # ping mydomain1.com ping: cannot resolve mydomain1.com: Unknown host Is it a bug of dnsmasq 2.59? How to manage this problem?

    Read the article

  • HP MSR 30-10a Router - Route Traffic over Default Route

    - by SteadH
    We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

    Read the article

  • mobile broadband recommendations for Lenovo T500

    - by Justin Grant
    I use a Lenovo T500 primarily in and around San Francisco, although I do some travel in the US on business and occasionally to Europe/Asia. I'm looking for a good mobile broadband option for my T500. I am admittedly baffled by the various mobile-broadband choices (3G vs. 4G, WiMax vs. LTE vs. MIMO vs. ..., etc.). My priorities are (in this order): Compatible with Lenovo T500 and Windows 7. I realize only the AT&T accessory card is listed on Lenovo's site, but I've also heard that other cards will work in my T500 too, like the WiMax/Wifi combo card-- so I'm interested in what actually works, not necessarily only what Lenovo is promoting. Reliable coverage in US large cities, especially the SF Bay Area. my IPhone has lousy coverage in many spots, so I'd be nervous about an AT&T 3G option unless the problem is with the IPhone and not AT&T's network. I'm OK with non-great coverage outside major US cities, since I don't do much travel in those areas. Speed. faster is better. Internal card. I'd slightly prefer something I could install inside my T500 instead of a dongle on the side that might break off, although this is my lowest priority so it's not a big deal. Price. I don't want to pay over $100/month. I've tried lots of Googling and haven't come up with clear answers. I've seen lots of general overviews without recommendations, and lots of passionate opinions which don't feel objective (and don't help me understand compatibility with my hardware & geography). Can you recommend a good, objective guide online, ideally for Lenovo although general guide is OK too, which can help me figure out which option is the best one for me? I'd also be interested in your own personal experiences of using mobile broadband using a Lenovo T500. I'll accept the answer which gets me closest to making a decision.

    Read the article

  • Proliant server will not accept new hard disks in RAID 1+0?

    - by Leigh
    I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

    Read the article

  • What NAS setup for two-way syncing over the internet?

    - by Jamse
    I have family living a few hours away and have a lot of files that I would like to share - especially lots of folders of digital photos, but also documents etc. - partially so they can see them, partially so I can have access when I visit them and partially for backup / redundancy purposes. My current hard drives on my main machine are getting pretty full anyway, and I have a MythTV box where my music is currently stored, so I was thinking of getting a NAS anyway. And at the other end my family have a few computers, so they would probably benefit from a NAS too. My general idea (though I'm willing to shift on this if there are any bright ideas about other ways of achieving my objectives) is to get a matching pair of NASs and have them sync over the internet. (To cut down on bandwidth use I would get them in sync locally to start with.) Having read around as best I can it seems that syncing over the internet is generally only a feature on quite high end units. However, I have seen that QNAP seem to feature this on their TS-110 and TS-210 units, which might work (they call it "remote replication"). They seem pretty reasonably priced for what they are, but of course with buying 2 of them and then adding the drives (say 1TB or 2TB each) I'd be looking at about £400 total. So, I'm looking for recommendations really. I don't want to spend more than the QNAPs would cost me, but any other ideas would be most appreciated. I am comfortable with technology and tinkering around, but I don't have as much time for that as I would like, so I guess I would favour solutions that require less tinkering rather than more (even though that's less fun!). Any thoughts would be welcome, as would any comments from people who have used the QNAP boxes for this. Thanks in advance. Some specifications: Two-way syncing. Changes made at either end should be synced to the other. There shouldn't be one unit that is effectively a read-only mirror of the other. Not real time. The syncing doesn't need to be real time - if it updated, say, daily overnight that would be fine. Set and forget. I would prefer minimal user interaction once set up - it would be great if syncs were scheduled and automatic. OS independence. I am running Windows XP plus an Ubuntu-based MythTV box. At the other end there are Windows 7 and Windows XP machines, plus a networked TV set top box which I think can play files off the network. Machine independence. I would favour a system that is self-contained, i.e. not reliant on any particular PC being switched on. If the system had enough else going for it I could perhaps work around it at this end, where I only have one PC that's used as such, but it would be harder at the other where there are at least two PCs that might be accessing the files. Notifications. I guess things like getting an email notification if the syncing fell over for any reason would be useful, though it's not a deal breaker. Update I've been digging some more and it looks like QNAP's Remote Replication function is actually just Rsync, so only really suitable for one-way syncing. I've posted on their forum to double check, but I think that's the case. In which case, I think the focus of my question is now either: do any reasonably-priced NASs support bidirectional syncing over the internet?, or has anyone had any luck installing onto NASs for this purpose? (Also, updated question to clarify that I'm after two-way syncing.)

    Read the article

  • Can't Move Windows to 2nd Monitor without Left Mouse and Cntl Key

    - by John C
    I have 2 very frustrating problems that maybe someone can help me with: I have 2 monitors (different sizes and resolutions) setup with the "Extended" monitor Win7 setup. My problem is this = I can not "move" a window from my Primary Monitor (larger and higher resolution on right side in front of me) to my Secondary 2nd monitor (smaller and lower resolution) with just selecting the title bar with the left mouse button and dragging it to the left. Windows 7 "snaps" it back to the left Primary Monitor when the window is physically in the 2nd window area as I'm holding the left mouse button. I can prevent this problem - by holding down the Cntl Key with the Left Mouse button, but this is extremely annoying to me. Also I typically "lose" focus if I try typing input on the 2nd monitor. Typing is erratic with regard to keystroke accuracy from my keyboard translated into input on the 2nd screen. No problem with typing input on the primary left monitor. I find this extremely annoying in Windows 7 and turning off the "snap" feature via the Control panel does NOT work for me. Win7 stubbornly refuses to move my selected window to my 2nd monitor without me "forcing" Win7 to do this with the Cntrl Key. Please tell me this is not a Win7 feature. Also on my system - Windows Key + Shift, Left arrow Key (pressed together) or the same combo with The Right arrow Key - don't do anything whatsoever. Widows Key with "+" however does maximize current window across both monitors, and I can "restore" it with Windows Key and "-" back to original monitor and size. I have tried various solutions including changing the resolutions of one or both of my monitors and sometimes "temporarily helps" but reverts back to the problem. Also if I swap the logical (not physical) layout so that I tell Win7 the monitors are setup in a reserved situation (Large monitor on the left, and small on the right) - this also sometimes helps for awhile - and is very strange and awkward to work with "backwards". But all of these solutions stop working. The only solution that consistently works for "moving" the screens is to hold the Cntrl Key down as I'm moving window with the left mouse selected on the title bar. Even that however, doesn't prevent the loss of typing focus for me on the 2nd monitor - while at the same time the typing on the 1st monitor is fine. Any help on moving my window screens from one monitor on my 2nd monitor without having to press the Cntrl key while holding down my left mouse button with be appreciated. Also any help on gaining typing "focus" into my 2nd screen with be helpful too. Thanks - John

    Read the article

  • BIND DNS server (Windows) - Unable to access my local domain from other computers on LAN

    - by Ricardo Saraiva
    I have a BIND DNS server running on my Windows 7 development machine and I'm serving pages with WAMPSERVER. My ideia is to develop some tools (in PHP) for my intranet at work and I want them to be accessible via LAN in this format: http://tools.mycompany.com I've already placed BIND and I can access http://tools.mycompany.com on the machine that holds BIND server, but I cannot access it from other LAN computers. I've done the following on my router: defined static IP's for all LAN computers set Port Forwarding to my server (remember: it serves DNS and Web pages) set DNS server configuration to point to my LAN server On LAN computers, I went to Local Area Network properties and also changed the DNS server IP in order to point to my local DNS server. If it helps, here is my named.conf file: options { directory "c:\windows\SysWOW64\dns\etc"; forwarders {127.0.0.1; 8.8.8.8; 8.8.4.4;}; pid-file "run\named.pid"; allow-transfer { none; }; recursion no; }; logging{ channel my_log{ file "log\named.log" versions 3 size 2m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ my_log; }; }; zone "mycompany.com" IN { type master; file "zones\db.mycompany.com.txt"; allow-transfer { none; }; }; key "rndc-key" { algorithm hmac-md5; secret "qfApxn0NxXiaacFHpI86Rg=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; ...and a single zone I've defined - file db.mycompany.com.txt: $TTL 6h @ IN SOA tools.mycompany.com. hostmaster.mycompany.com. ( 2014042601 10800 3600 604800 86400 ) @ NS tools.mycompany.com. tools IN A 192.168.1.4 www IN A 192.168.1.4 On the file above 192.168.1.4 is the IP of the local machine inside my LAN. Can someone help me here? I need my web pages to be accessible from other computers inside my LAN using my custom domain name. I've tried on other computers and they can access my server via http://192.168.1.4/, but no able when using http://tools.mycompany.com . Please, consider the following: I'm completely new to BIND I have basic knowledge in Apache configuration Thanks a lot for your help.

    Read the article

  • Recognizing Dell EquilLogic with Nagios

    - by user3677595
    EDIT: All firmware and models are compatible, that is why nothing is posted about it. Okay, so there will be a lot here, so please bare with me. I've been working on this now for a few hours (reading manuals and such) so I'm not just coming here right out of the blue. I am working on a PRE-EXISTING Nagios server where there are several other existing plugins and checks running and working. Now I want to add another server there to check so I made the following modifications: First and foremost, I added a file to /usr/local/nagios/libexec named: check_equallogic.sh. The permissions are 755, the same as all others. I have chowned to nagios:nagios and in the listing it shows the Owner as Nagios. I then added a command to the commands.cfg file in \usr\local\nagios\etc\objects that shows the following: # 'check_equallogic' command definition define command{ command_name check_equallogic command_line $USER1$/check_equallogic -H $HOSTADDRESS$ -C $ARG1$ -t $ARG2$ $ARG3$ } Following this, I created a file named equallogic.cfg in the objects directory and it contains (more or less): define host{ use linux-server ; Inherit default values from a template host_name 172.16.50.11 ; The name we're giving to this device alias EqualLogic ; A longer name associated with the device address 172.16.50.11 ; IP address of the device contact_groups admins } Check Equallogic Information define service{ use generic-service host_name 172.16.50.11 service_description General Information check_command check_equallogic!public!info } After ensuring that permissions are okay for all files, I restart the nagios service, no errors. When I go into the WebGUI, I get the following errors AFTER the check runs: (Return code of 127 is out of bounds - plugin may be missing) Extra, probably unrelated problem Furthermore, when I log into the EquilLogic server, under Audit logs I get the following error: Level: AUDIT Time: 26/05/2014 3:59:13 PM Member: ps4100-1 Subsystem: agent Event ID: 22.7.1 SNMP packet validation failed, request received from 172.16.10.11 An snmpwalk receives a timeout, whereas others succeed. I will work on importing the MIBs tomorrow. The reason why I am mentioning it is because I want to make sure that it is only a MIB issue for the SNMP. If it is, then ignore this area. I am entirely unsure of what to do here.

    Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >