Search Results

Search found 9610 results on 385 pages for 'common mistakes'.

Page 259/385 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

• Web.Config is Cached

  - by SGWellens

  There was a question from a student over on the Asp.Net forums about improving site performance. The concern was that every time an app setting was read from the Web.Config file, the disk would be accessed. With many app settings and many users, it was believed performance would suffer. Their intent was to create a class to hold all the settings, instantiate it and fill it from the Web.Config file on startup. Then, all the settings would be in RAM. I knew this was not correct and didn't want to just say so without any corroboration, so I did some searching. Surprisingly, this is a common misconception. I found other code postings that cached the app settings from Web.Config. Many people even thanked the posters for the code. In a later post, the student said their text book recommended caching the Web.Config file. OK, here's the deal. The Web.Config file is already cached. You do not need to re-cache it. From this article http://msdn.microsoft.com/en-us/library/aa478432.aspx It is important to realize that the entire <appSettings> section is read, parsed, and cached the first time we retrieve a setting value. From that point forward, all requests for setting values come from an in-memory cache, so access is quite fast and doesn't incur any subsequent overhead for accessing the file or parsing the XML. The reason the misconception is prevalent may be because it's hard to search for Web.Config and cache without getting a lot of hits on how to setup caching in the Web.Config file. So here's a string for search engines to index on: "Is the Web.Config file Cached?" A follow up question was, are the connection strings cached? Yes. http://msdn.microsoft.com/en-us/library/ms178683.aspx At run time, ASP.NET uses the Web.Config files to hierarchically compute a unique collection of configuration settings for each incoming URL request. These settings are calculated only once and then cached on the server. And, as everyone should know, if you modify the Web.Config file, the web application will restart. I hope this helps people to NOT write code! Steve WellensCodeProject

  Read the article

• Informal Interviews: Just Relax (or Should I?)

  - by david.talamelli

  I was in our St Kilda Rd office last week and had the chance to meet up with Dan and David from GradConnection. I love what these guys are doing, their business has been around for two years and I really like how they have taken their own experiences from University found a niche in their market and have chased it. These guys are always networking. Whenever they come to Melbourne they send me a tweet to catch up, even though we often miss each other they are persistent. It sounds like their business is going from strength to strength and I have to think that success comes from their hard work and enthusiasm for their business. Anyway, before my meeting with ProGrad I noticed a tweet from Kevin Wheeler who was saying it was his last day in Melbourne - I sent him a message and we met up that afternoon for a coffee (I am getting to the point I promise). On my way back to the office after my meeting I was on a tram and was sitting beside a lady who was talking to her friend on her mobile. She had just come back from an interview and was telling her friend how laid back the meeting was and how she wasn't too sure of the next steps of the process as it was a really informal meeting. The recurring theme from this phone call was that 1) her and the interviewer got along really well and had a lot in common 2) the meeting was very informal and relaxed. I wasn't at the interview so I cannot say for certain, but in my experience regardless of the type of interview that is happening whether it is a relaxed interview at a coffee shop or a behavioural interview in an office setting one thing is consistent: the employer is assessing your ability to perform the role and fit into the company. Different interviewers I find have different interviewing styles. For example some interviewers may create a very relaxed environment in the thinking this will draw out less practiced answers and give a more realistic view of the person and their abilities while other interviewers may put the candidate "under the pump" to see how they react in a stressful situation. There are as many interviewing styles as there are interviewers. I think candidates regardless of the type of interview need to be professional and honest in both their skills/experiences, abilities and career plans (if you know what they are). Even though an interview may be informal, you shouldn't slip into complacency. You should not forget the end goal of the interview which is to get a job. Business happens outside of the office walls and while you may meet someone for a coffee it is still a business meeting no matter how relaxed the setting. You don't need to be stick in the mud and not let your personality shine through, but that first impression you make may play a big part in how far in the interview process you go. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

  Read the article

• Web.Config is Cached

  - by SGWellens

  There was a question from a student over on the Asp.Net forums about improving site performance. The concern was that every time an app setting was read from the Web.Config file, the disk would be accessed. With many app settings and many users, it was believed performance would suffer. Their intent was to create a class to hold all the settings, instantiate it and fill it from the Web.Config file on startup. Then, all the settings would be in RAM. I knew this was not correct and didn't want to just say so without any corroboration, so I did some searching. Surprisingly, this is a common misconception. I found other code postings that cached the app settings from Web.Config. Many people even thanked the posters for the code. In a later post, the student said their text book recommended caching the Web.Config file. OK, here's the deal. The Web.Config file is already cached. You do not need to re-cache it. From this article http://msdn.microsoft.com/en-us/library/aa478432.aspx It is important to realize that the entire <appSettings> section is read, parsed, and cached the first time we retrieve a setting value. From that point forward, all requests for setting values come from an in-memory cache, so access is quite fast and doesn't incur any subsequent overhead for accessing the file or parsing the XML. The reason the misconception is prevalent may be because it's hard to search for Web.Config and cache without getting a lot of hits on how to setup caching in the Web.Config file. So here's a string for search engines to index on: "Is the Web.Config file Cached?" A follow up question was, are the connection strings cached? Yes. http://msdn.microsoft.com/en-us/library/ms178683.aspx At run time, ASP.NET uses the Web.Config files to hierarchically compute a unique collection of configuration settings for each incoming URL request. These settings are calculated only once and then cached on the server. And, as everyone should know, if you modify the Web.Config file, the web application will restart. I hope this helps people to NOT write code!   Steve WellensCodeProject

  Read the article

• Deployment Options for AutoVue 20.0 Users

  - by celine.beck

  AutoVue release 20.0 boasts a brand new architecture. As part of this product rearchitecture, AutoVue can now be deployed either as a desktop deployment to serve the needs of individual users in their personal productivity; or in a Client / Server deployment for those that require connections to enterprise applications / back-end systems. The most common question that we hear from our customers about this new architecture is the following: "Is AutoVue Desktop Version still part of release 20.0 and if so, what is the difference between AutoVue Desktop Version and the Desktop deployment of AutoVue release 20.0?" A detailed answer to these questions is provided in a very complete article entitled Understanding Deployment Options for AutoVue 19.3 Desktop Version users upgrading to AutoVue 20.0 (note 1058254.1) which was posted on My Oracle Support. Is AutoVue Desktop Version still part of AutoVue 20.0? Yes, AutoVue Desktop Version 20.0 is still available to customers and partners, as a maintenance release of AutoVue 19.3. As such, it will not contain any of the new capabilities featured in AutoVue release 20.0. All format enhancements and new format support have been added to release 20.0 Desktop Version though. What is the different between AutoVue Desktop Version 20.0 and the Desktop Deployment of AutoVue release 20.0? AutoVue 20.0 Desktop deployment works like the AutoVue Desktop version. It is installed as a standalone product on each user's machine and runs a local instance of AutoVue. The AutoVue 20.0 Desktop deployment includes all new features, formats and performance enhancements included in release 20.0 (walkthrough capability, improved compare, ...) What deployment options are available to AutoVue 19.3 Desktop Version customers? AutoVue Desktop Version users can evolve at their own pace to the new AutoVue platform. With release 20.0, customers can opt to: Option 1: Stay on AutoVue Desktop Version 20.0 Option 2: Migrate to AutoVue and select the desktop deployment method Option 3: Migrate to AutoVue and select the Client/Server deployment method What is the Client / Server deployment of AutoVue 20.0? The Client/Server deployment has AutoVue installed on a server, to which local client machines connect to access and view documents. AutoVue 20.0 Client Server Deployment allows users to leverage the new online/offline capabilities in release 20.0 and easily switch between online and offline modes of operation. With the Client/Server deployment, customers also get a complete, open and standards-based set of integration tools that allows them to tie AutoVue to any enterprise applications to provide users with a consistent view of data and business objects and expand workflow automation to document-based processes. Related articles: AutoVue Release 20.0 Now Available, New Walkthrough Capability in AutoVue 20.0, Watch the AutoVue 20.0 Release Webcast, April 27 at 12pm EST

  Read the article

• Do You Know How OUM defines the four, basic types of business system testing performed on a project? Why not test your knowledge?

  - by user713452

  Testing is perhaps the most important process in the Oracle® Unified Method (OUM). That makes it all the more important for practitioners to have a common understanding of the various types of functional testing referenced in the method, and to use the proper terminology when communicating with each other about testing activities. OUM identifies four basic types of functional testing, which is sometimes referred to as business system testing.  The basic functional testing types referenced by OUM include: Unit Testing Integration Testing System Testing, and  Systems Integration Testing See if you can match the following definitions with the appropriate type above? A.  This type of functional testing is focused on verifying that interfaces/integration between the system being implemented (i.e. System under Discussion (SuD)) and external systems functions as expected. B.     This type of functional testing is performed for custom software components only, is typically performed by the developer of the custom software, and is focused on verifying that the several custom components developed to satisfy a given requirement (e.g. screen, program, report, etc.) interact with one another as designed. C.  This type of functional testing is focused on verifying that the functionality within the system being implemented (i.e. System under Discussion (SuD)), functions as expected.  This includes out-of-the -box functionality delivered with Commercial Off-The-Shelf (COTS) applications, as well as, any custom components developed to address gaps in functionality.  D.  This type of functional testing is performed for custom software components only, is typically performed by the developer of the custom software, and is focused on verifying that the individual custom components developed to satisfy a given requirement  (e.g. screen, program, report, etc.) functions as designed.   Check your answers below: (D) (B) (C) (A) If you matched all of the functional testing types to their definitions correctly, then congratulations!  If not, you can find more information in the Testing Process Overview and Testing Task Overviews in the OUM Method Pack.

  Read the article

• Sixeyed.Caching available now on NuGet and GitHub!

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/22/sixeyed.caching-available-now-on-nuget-and-github.aspxThe good guys at Pluralsight have okayed me to publish my caching framework (as seen in Caching in the .NET Stack: Inside-Out) as an open-source library, and it’s out now. You can get it here: Sixeyed.Caching source code on GitHub, and here: Sixeyed.Caching package v1.0.0 on NuGet. If you haven’t seen the course, there’s a preview here on YouTube: In-Process and Out-of-Process Caches, which gives a good flavour. The library is a wrapper around various cache providers, including the .NET MemoryCache, AppFabric cache, and  memcached*. All the wrappers inherit from a base class which gives you a set of common functionality against all the cache implementations: •    inherits OutputCacheProvider, so you can use your chosen cache provider as an ASP.NET output cache; •    serialization and encryption, so you can configure whether you want your cache items serialized (XML, JSON or binary) and encrypted; •    instrumentation, you can optionally use performance counters to monitor cache attempts and hits, at a low level. The framework wraps up different caches into an ICache interface, and it lets you use a provider directly like this: Cache.Memory.Get<RefData>(refDataKey); - or with configuration to use the default cache provider: Cache.Default.Get<RefData>(refDataKey); The library uses Unity’s interception framework to implement AOP caching, which you can use by flagging methods with the [Cache] attribute: [Cache] public RefData GetItem(string refDataKey) - and you can be more specific on the required cache behaviour: [Cache(CacheType=CacheType.Memory, Days=1] public RefData GetItem(string refDataKey) - or really specific: [Cache(CacheType=CacheType.Disk, SerializationFormat=SerializationFormat.Json, Hours=2, Minutes=59)] public RefData GetItem(string refDataKey) Provided you get instances of classes with cacheable methods from the container, the attributed method results will be cached, and repeated calls will be fetched from the cache. You can also set a bunch of cache defaults in application config, like whether to use encryption and instrumentation, and whether the cache system is enabled at all: <sixeyed.caching enabled="true"> <performanceCounters instrumentCacheTotalCounts="true" instrumentCacheTargetCounts="true" categoryNamePrefix ="Sixeyed.Caching.Tests"/> <encryption enabled="true" key="1234567890abcdef1234567890abcdef" iv="1234567890abcdef"/> <!-- key must be 32 characters, IV must be 16 characters--> </sixeyed.caching> For AOP and methods flagged with the cache attribute, you can override the compile-time cache settings at runtime with more config (keyed by the class and method name): <sixeyed.caching enabled="true"> <targets> <target keyPrefix="MethodLevelCachingStub.GetRandomIntCacheConfiguredInternal" enabled="false"/> <target keyPrefix="MethodLevelCachingStub.GetRandomIntCacheExpiresConfiguredInternal" seconds="1"/> </targets> It’s released under the MIT license, so you can use it freely in your own apps and modify as required. I’ll be adding more content to the GitHub wiki, which will be the main source of documentation, but for now there’s an FAQ to get you started. * - in the course the framework library also wraps NCache Express, but there's no public redistributable library that I can find, so it's not in Sixeyed.Caching.

  Read the article

• ASP.NET Web API - Screencast series Part 2: Getting Data

  - by Jon Galloway

  We're continuing a six part series on ASP.NET Web API that accompanies the getting started screencast series. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. In Part 1 we looked at what ASP.NET Web API is, why you'd care, did the File / New Project thing, and did some basic HTTP testing using browser F12 developer tools. This second screencast starts to build out the Comments example - a JSON API that's accessed via jQuery. This sample uses a simple in-memory repository. At this early stage, the GET /api/values/ just returns an IEnumerable<Comment>. In part 4 we'll add on paging and filtering, and it gets more interesting.   The get by id (e.g. GET /api/values/5) case is a little more interesting. The method just returns a Comment if the Comment ID is valid, but if it's not found we throw an HttpResponseException with the correct HTTP status code (HTTP 404 Not Found). This is an important thing to get - HTTP defines common response status codes, so there's no need to implement any custom messaging here - we tell the requestor that the resource the requested wasn't there.  public Comment GetComment(int id) { Comment comment; if (!repository.TryGet(id, out comment)) throw new HttpResponseException(HttpStatusCode.NotFound); return comment; } This is great because it's standard, and any client should know how to handle it. There's no need to invent custom messaging here, and we can talk to any client that understands HTTP - not just jQuery, and not just browsers. But it's crazy easy to consume an HTTP API that returns JSON via jQuery. The example uses Knockout to bind the JSON values to HTML elements, but the thing to notice is that calling into this /api/coments is really simple, and the return from the $.get() method is just JSON data, which is really easy to work with in JavaScript (since JSON stands for JavaScript Object Notation and is the native serialization format in Javascript). $(function() { $("#getComments").click(function () { // We're using a Knockout model. This clears out the existing comments. viewModel.comments([]); $.get('/api/comments', function (data) { // Update the Knockout model (and thus the UI) with the comments received back // from the Web API call. viewModel.comments(data); }); }); }); That's it! Easy, huh? In Part 3, we'll start modifying data on the server using POST and DELETE.

  Read the article

• Welcome to my geeks blog

  - by bconlon

  Hi and welcome! I'm Bazza and this is my geeks blog. I have 20 years Visual Studio mainly C++, MFC,  ATL and now, thankfully, C# and I am embarking on the new world (well new to me) of WPF, so I thought I would try and capture my successful...and not so successful...WPF experiences with the geek world. So where to start? WPF? What I know so far... From wiki..."Windows Presentation Foundation (or WPF) is a graphical subsystem for rendering user interfaces in Windows-based applications." Hmm, great but didn't MFC, ATL (my head hurt with that one), and .Net all have APIs to allow me to code against the Windows Graphical Device Interface (GDI)? "Rather than relying on the older GDI subsystem, WPF utilizes DirectX. WPF attempts to provide a consistent programming model for building applications and provides a separation between the user interface and the business logic." OK, different drawing code, same Windows and weren't we always taught to separate our UI, Business Layer and Data Access Layer? "WPF employs XAML, a derivative of XML, to define and link various UI elements. WPF applications can be deployed as standalone desktop programs, or hosted as an embedded object in a website." Cool, now we're getting somewhere. So when they say separation they really mean separation. The crux of this appears to be that you can have creative people writing the UI and making it attractive and intuitive to use, whist the geeks concentrate on writing the Business and Data Access stuff. XAML (eXtensible Application Markup Language) maps XML elements and attributes directly to Common Language Runtime (CLR) object instances, properties and events. True separation of the View and Model. WPF also provides logical separation of a control from its appearance. In a traditional Windows system, all Controls have a base class containing a Windows handle and each Control knows how to render itself. In WPF, the controls are more like those in a Web Browser using Cascading Style Sheet, they are not wrappers for standard Windows Controls. Instead, they have a default 'template' that defines a visual theme which can easily be replaced by a custom template. But it gets better. WPF concentrates heavily on Data Binding where the client can bind directly to data on the server. I think this concept was first introduced in 'Classic' Visual Basic, where you could bind a list directly to a data from an Access database, and you could do similar in ASP .Net. However, the WPF implementation is far superior than it's predecessors. There are also other technologies that I want to look at like LINQ and the Entity Framework, but that's all for now. #

  Read the article

• A Few Words from Oracle’s Channel Chief

  - by Meghan Fritz-Oracle

  As Oracle enters a new fiscal year, I want to take a moment and reflect on my time at Oracle thus far. The technology industry is currently at an inflection point trying to figure out where growth will come from. When you look at Oracle’s portfolio of products, it's a complete stack from applications to disc, offering differentiation in the marketplace. I was initially drawn to Oracle’s leadership, strategy, and world-class technology. Since joining the Oracle team in October 2013, I’ve had the privilege of traveling around the globe visiting our partners and customers, and wanted to share several common themes that came up during these meetings. Cloud: Many partners are trying to figure out how to build a business around the cloud. Oracle partners can currently resell or refer our cloud services. We saw over 300 percent growth from cloud resale last quarter. Engineered Systems: Hardware and software integrated together to simplify IT allows our joint customers to focus on the innovation they need to compete in a complex marketplace. We're seeing great success in a several areas, with more partners saying, “Let’s start with Oracle on Oracle.” The Internet of Things: This is the next big opportunity for device manufacturers and ISV‘s to capture market share in what is projected to be a mulit-trillion-dollar opportunity, according to Gartner.  Competition: We've got a tremendous middleware platform and a tremendous database install base. We’re not just a database company; we are a complete provider. So looking ahead, what are my priorities for fiscal 2015? Oracle PartnerNetwork has some very exciting plans on the horizon. There’s a lot more leadership and announcements to unfold, especially at this year’s Global Partner Kickoff taking place on June 25 + 26 depending on your region and time zone. I along with several other Oracle executives will be shedding light on Oracle’s strategy for the upcoming year, the latest opportunities within the OPN Specialized Program and sales strategies that will help you to continue to grow and profit with Oracle. Stay tuned for registration information next week.We also have Oracle OpenWorld and JavaOne to look forward to. These conferences are taking place in San Francisco from September 28 – October 2. We’ll have a variety of partner-specific activities for you at OPN Central @ OpenWorld including the OPN keynote, the famed AfterDark networking reception, access to the OPN Lounge and more.In the meantime, I hope that everyone has a great end to fiscal 2014.Best regards,Rich Geraffo Senior Vice President, Worldwide Alliances and Channels

  Read the article

• Returning Identity Value in SQL Server: @@IDENTITY Vs SCOPE_IDENTITY Vs IDENT_CURRENT

  - by Arefin Ali

  We have some common misconceptions on returning the last inserted identity value from tables. To return the last inserted identity value we have options to use @@IDENTITY or SCOPE_IDENTITY or IDENT_CURRENT function depending on the requirement but it will be a real mess if anybody uses anyone of these functions without knowing exact purpose. So here I want to share my thoughts on this. @@IDENTITY, SCOPE_IDENTITY and IDENT_CURRENT are almost similar functions in terms of returning identity value. They all return values that are inserted into an identity column. Earlier in SQL Server 7 we used to use @@IDENTITY to return the last inserted identity value because those days we don’t have functions like SCOPE_IDENTITY or IDENT_CURRENT but now we have these three functions. So let’s check out which one responsible for what. IDENT_CURRENT returns the last inserted identity value in a particular table. It never depends on a connection or the scope of the insert statement. IDENT_CURRENT function takes a table name as parameter. Here is the syntax to get the last inserted identity value in a particular table using IDENT_CURRENT function. SELECT IDENT_CURRENT('Employee') Both the @@IDENTITY and SCOPE_IDENTITY return the last inserted identity value created in any table in the current session. But there is little difference between these two i.e. SCOPE_IDENTITY returns value inserted only within the current scope whereas @@IDENTITY is not limited to any particular scope. Here are the syntaxes to get the last inserted identity value using these functions SELECT @@IDENTITY SELECT SCOPE_IDENTITY() Now let’s have a look at the following example. Suppose I have two tables called Employee and EmployeeLog. CREATE TABLE Employee ( EmpId NUMERIC(18, 0) IDENTITY(1,1) NOT NULL, EmpName VARCHAR(100) NOT NULL, EmpSal FLOAT NOT NULL, DateOfJoining DATETIME NOT NULL DEFAULT(GETDATE()) ) CREATE TABLE EmployeeLog ( EmpId NUMERIC(18, 0) IDENTITY(1,1) NOT NULL, EmpName VARCHAR(100) NOT NULL, EmpSal FLOAT NOT NULL, DateOfJoining DATETIME NOT NULL DEFAULT(GETDATE()) ) I have an insert trigger defined on the table Employee which inserts a new record in the EmployeeLog whenever a record insert in the Employee table. So Suppose I insert a new record in the Employee table using following statement: INSERT INTO Employee (EmpName,EmpSal) VALUES ('Arefin','1') The trigger will be fired automatically and insert a record in EmployeeLog. Here the scope of the insert statement and the trigger are different. In this situation if I retrieve last inserted identity value using @@IDENTITY, it will simply return the identity value from the EmployeeLog because it’s not limited to a particular scope. Now if I want to get the Employee table’s identity value then I need to use SCOPE_IDENTITY in this scenario. So the moral is always use SCOPE_IDENTITY to return the identity value of a recently created record in a sql statement or stored procedure. It’s safe and ensures bug free code.

  Read the article

• Returning Identity Value in SQL Server: @@IDENTITY Vs SCOPE_IDENTITY Vs IDENT_CURRENT

  - by Arefin Ali

  We have some common misconceptions on returning the last inserted identity value from tables. To return the last inserted identity value we have options to use @@IDENTITY or SCOPE_IDENTITY or IDENT_CURRENT function depending on the requirement but it will be a real mess if anybody uses anyone of these functions without knowing exact purpose. So here I want to share my thoughts on this. @@IDENTITY, SCOPE_IDENTITY and IDENT_CURRENT are almost similar functions in terms of returning identity value. They all return values that are inserted into an identity column. Earlier in SQL Server 7 we used to use @@IDENTITY to return the last inserted identity value because those days we don’t have functions like SCOPE_IDENTITY or IDENT_CURRENT but now we have these three functions. So let’s check out which one responsible for what. IDENT_CURRENT returns the last inserted identity value in a particular table. It never depends on a connection or the scope of the insert statement. IDENT_CURRENT function takes a table name as parameter. Here is the syntax to get the last inserted identity value in a particular table using IDENT_CURRENT function. SELECT IDENT_CURRENT('Employee') Both the @@IDENTITY and SCOPE_IDENTITY return the last inserted identity value created in any table in the current session. But there is little difference between these two i.e. SCOPE_IDENTITY returns value inserted only within the current scope whereas @@IDENTITY is not limited to any particular scope. Here are the syntaxes to get the last inserted identity value using these functions SELECT @@IDENTITYSELECT SCOPE_IDENTITY() Now let’s have a look at the following example. Suppose I have two tables called Employee and EmployeeLog. CREATE TABLE Employee( EmpId NUMERIC(18, 0) IDENTITY(1,1) NOT NULL, EmpName VARCHAR(100) NOT NULL, EmpSal FLOAT NOT NULL, DateOfJoining DATETIME NOT NULL DEFAULT(GETDATE()))CREATE TABLE EmployeeLog( EmpId NUMERIC(18, 0) IDENTITY(1,1) NOT NULL, EmpName VARCHAR(100) NOT NULL, EmpSal FLOAT NOT NULL, DateOfJoining DATETIME NOT NULL DEFAULT(GETDATE())) I have an insert trigger defined on the table Employee which inserts a new record in the EmployeeLog whenever a record insert in the Employee table. So Suppose I insert a new record in the Employee table using following statement: INSERT INTO Employee (EmpName,EmpSal) VALUES ('Arefin','1') The trigger will be fired automatically and insert a record in EmployeeLog. Here the scope of the insert statement and the trigger are different. In this situation if I retrieve last inserted identity value using @@IDENTITY, it will simply return the identity value from the EmployeeLog because it’s not limited to a particular scope. Now if I want to get the Employee table’s identity value then I need to use SCOPE_IDENTITY in this scenario. So the moral is always use SCOPE_IDENTITY to return the identity value of a recently created record in a sql statement or stored procedure. It’s safe and ensures bug free code.

  Read the article

• Translate report data export from RUEI into HTML for import into OpenOffice Calc Spreadsheets

  - by [email protected]

  A common question of users is, How to import the data from the automated data export of Real User Experience Insight (RUEI) into tools for archiving, dashboarding or combination with other sets of data.XML is well-suited for such a translation via the companion Extensible Stylesheet Language Transformations (XSLT). Basically XSLT utilizes XSL, a template on what to read from your input XML data file and where to place it into the target document. The target document can be anything you like, i.e. XHTML, CSV, or even a OpenOffice Spreadsheet, etc. as long as it is a plain text format.XML 2 OpenOffice.org SpreadsheetFor the XSLT to work as an OpenOffice.org Calc Import Filter:How to add an XML Import Filter to OpenOffice CalcStart OpenOffice.org Calc andselect Tools > XML Filter SettingsNew...Fill in the details as follows:Filter name: RUEI Import filterApplication: OpenOffice.org Calc (.ods)Name of file type: Oracle Real User Experience InsightFile extension: xmlSwitch to the transformation tab and enter/select the following leaving the rest untouchedXSLT for import: ruei_report_data_import_filter.xslPlease see at the end of this blog post for a download of the referenced file.Select RUEI Import filter from list and Test XSLTClick on Browse to selectTransform file: export.php.xmlOpenOffice.org Calc will transform and load the XML file you retrieved from RUEI in a human-readable format.You can now select File > Open... and change the filetype to open your RUEI exports directly in OpenOffice.org Calc, just like any other a native Spreadsheet format.Files of type: Oracle Real User Experience Insight (*.xml)File name: export.php.xml XML 2 XHTMLMost XML-powered browsers provides for inherent XSL Transformation capabilities, you only have to reference the XSLT Stylesheet in the head of your XML file. Then open the file in your favourite Web Browser, Firefox, Opera, Safari or Internet Explorer alike.<?xml version="1.0" encoding="ISO-8859-1"?><!-- inserted line below --> <?xml-stylesheet type="text/xsl" href="ruei_report_data_export_2_xhtml.xsl"?><!-- inserted line above --><report>You can find a patched example export from RUEI plus the above referenced XSL-Stylesheets here: export.php.xml - Example report data export from RUEI ruei_report_data_export_2_xhtml.xsl - RUEI to XHTML XSL Transformation Stylesheetruei_report_data_import_filter.xsl - OpenOffice.org XML import filter for RUEI report export data If you would like to do things like this on the command line you can use either Xalan or xsltproc.The basic command syntax for xsltproc is very simple:xsltproc -o output.file stylesheet.xslt inputfile.xmlYou can use this with the above two stylesheets to translate RUEI Data Exports into XHTML and/or OpenOffice.org Calc ODS-Format. Or you could write your own XSLT to transform into Comma separated Value lists.Please let me know what you think or do with this information in the comments below.Kind regards,Stefan ThiemeReferences used:OpenOffice XML Filter - Create XSLT filters for import and export - http://user.services.openoffice.org/en/forum/viewtopic.php?f=45&t=3490SUN OpenOffice.org XML File Format 1.0 - http://xml.openoffice.org/xml_specification.pdf

  Read the article

• box2D simulation doesn't work

  - by shadow_of__soul

  has been a while since last time i used box2D, and i needed to make some stuff, and i saw that my simulation don't worked (compiles, but do anything). i haven't been able to even have working the examples or this simple example i'm pasting below: package { import flash.display.Sprite; import flash.events.Event; import Box2D.Common.Math.b2Vec2; import Box2D.Dynamics.b2World; import Box2D.Dynamics.b2BodyDef; import Box2D.Dynamics.b2Body; import Box2D.Collision.Shapes.b2CircleShape; import Box2D.Dynamics.b2Fixture; import Box2D.Dynamics.b2FixtureDef; import org.flashdevelop.utils.FlashConnect; import flash.events.TimerEvent; import flash.utils.Timer; public class Main extends Sprite { public var world:b2World; public var wheelBody:b2Body; public var stepTimer:Timer; public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(e:Event = null):void { removeEventListener(Event.ADDED_TO_STAGE, init); var gravity:b2Vec2 = new b2Vec2(0, 10); world = new b2World(gravity, true); var wheelBodyDef:b2BodyDef = new b2BodyDef(); wheelBodyDef.type = b2Body.b2_dynamicBody; wheelBody = world.CreateBody(wheelBodyDef); var circleShape:b2CircleShape = new b2CircleShape(5); var wheelFixtureDef:b2FixtureDef = new b2FixtureDef(); wheelFixtureDef.shape = circleShape; var wheelFixture:b2Fixture = wheelBody.CreateFixture(wheelFixtureDef); stepTimer = new Timer(0.025 * 1000); stepTimer.addEventListener(TimerEvent.TIMER, onTick); FlashConnect.trace(wheelBody.GetPosition().x, wheelBody.GetPosition().y); stepTimer.start(); // entry point } private function onTick(a_event:TimerEvent):void { world.Step(0.025, 10, 10); FlashConnect.trace(wheelBody.GetPosition().x, wheelBody.GetPosition().y); } } } on this, the object should fall down, but the positions reported me by the trace method, are always 0. so is not a display problem, that i see everything freeze, is why the simulation is not working, and i have no idea why :( can anyone point me to the right direction of where i need to look for the problem? my settings are: windows 7 flashdevelop 4.2.1 SDK: 4.6.0 compiling for flash 10, but i tried every target i have available (till flash 11.5) project set at 30fps

  Read the article

• Earthquake Locator - Live Demo and Source Code

  - by Bobby Diaz

  Quick Links Live Demo Source Code I finally got a live demo up and running!  I signed up for a shared hosting account over at discountasp.net so I could post a working version of the Earthquake Locator application, but ran into a few minor issues related to RIA Services.  Thankfully, Tim Heuer had already encountered and explained all of the problems I had along with solutions to these and other common pitfalls.  You can find his blog post here.  The ones that got me were the default authentication tag being set to Windows instead of Forms, needed to add the <baseAddressPrefixFilters> tag since I was running on a shared server using host headers, and finally the Multiple Authentication Schemes settings in the IIS7 Manager.   To get the demo application ready, I pulled down local copies of the earthquake data feeds that the application can use instead of pulling from the USGS web site.  I basically added the feed URL as an app setting in the web.config:       <appSettings>         <!-- USGS Data Feeds: http://earthquake.usgs.gov/earthquakes/catalogs/ -->         <!--<add key="FeedUrl"             value="http://earthquake.usgs.gov/earthquakes/catalogs/1day-M2.5.xml" />-->         <!--<add key="FeedUrl"             value="http://earthquake.usgs.gov/earthquakes/catalogs/7day-M2.5.xml" />-->         <!--<add key="FeedUrl"             value="~/Demo/1day-M2.5.xml" />-->         <add key="FeedUrl"              value="~/Demo/7day-M2.5.xml" />     </appSettings> You will need to do the same if you want to run from local copies of the feed data.  I also made the following minor changes to the EarthquakeService class so that it gets the FeedUrl from the web.config:       private static readonly string FeedUrl = ConfigurationManager.AppSettings["FeedUrl"];       /// <summary>     /// Gets the feed at the specified URL.     /// </summary>     /// <param name="url">The URL.</param>     /// <returns>A <see cref="SyndicationFeed"/> object.</returns>     public static SyndicationFeed GetFeed(String url)     {         SyndicationFeed feed = null;           if ( !String.IsNullOrEmpty(url) && url.StartsWith("~") )         {             // resolve virtual path to physical file system             url = System.Web.HttpContext.Current.Server.MapPath(url);         }           try         {             log.Debug("Loading RSS feed: " + url);               using ( var reader = XmlReader.Create(url) )             {                 feed = SyndicationFeed.Load(reader);             }         }         catch ( Exception ex )         {             log.Error("Error occurred while loading RSS feed: " + url, ex);         }           return feed;     } You can now view the live demo or download the source code here, but be sure you have WCF RIA Services installed before running the application locally and make sure the FeedUrl is pointing to a valid location.  Please let me know if you have any comments or if you run into any issues with the code.   Enjoy!

  Read the article

• Preview of MSDN Library Changes

  - by ScottGu

  The MSDN team has been working some potential changes to the online MSDN Library designed to help streamline the navigation experience and make it easier to find the .NET Framework information you need. To solicit feedback on the proposed changes while they are still in development, they’ve posted a preview version of some proposed changes to a new MSDN Library Preview site which you can check out.  They’ve also created a survey that leads you through the ideas and asks for your opinions on some of the changes.  We’d very much like to have as many people as possible people take the survey and give us feedback. Quick Preview of Some of the Changes Below are some examples of a few of the changes being proposed: Streamlined .NET Namespaces Navigation The current MSDN Class Library lists all .NET namespaces in a flat-namespace (sorted alphabetically): Two downsides of the above approach are: Some of the least-used namespaces are listed first (like Microsoft.Aspnet.Snapin and Microsoft.Build.BuildEngine) All sub-namespaces are listed, which makes the list a little overwhelming, and page-load times to be slow The new MSDN Library Preview Site now lists “System” namespaces first (since those are the most used), and the home-page lists just top-level namespace groups – which makes it easier to find things, and enables the page to load faster:   Class overview and members pages merged into a single topic about each class Previously you had to navigate to several different pages to find member information about types: Links to these are still available in the MSDN Library Preview Site TOC – but the members are also now listed on the overview page, which makes it easy to quickly find everything in one place: Commonly used things are nearer the top of the page One of the other usability improvements with the new MSDN Library Preview Site is that common elements like “Code Examples” and “Inheritance Hierarchy” (for classes) are now listed near the top of the help page – making them easy to quickly find: Give Us Feedback with a Survey Above are just a few of the changes made with the new MSDN preview site – there are many other changes also rolled into it.  The MSDN team is doing usability studies on the new layout and navigation right now, and would very much like feedback on it. If you have 15 minutes and want to help vote on which of these ideas makes it into the production MSDN site, please visit this survey before June 30, play with the changes a bit, and let the MSDN team know what you think. Important Note: the MSDN preview site is not a fully functional version of MSDN – it’s really only there to preview the new ideas themselves, so please don’t expect it to be integrated with the rest of MSDN, with search, etc.  Once the MSDN team gets feedback on some of the changes being proposed they will roll them into the live site for everyone to use. Hope this helps, Scott

  Read the article

• WLS MBeans

  - by Jani Rautiainen

  WLS provides a set of Managed Beans (MBeans) to configure, monitor and manage WLS resources. We can use the WLS MBeans to automate some of the tasks related to the configuration and maintenance of the WLS instance. The MBeans can be accessed a number of ways; using various UIs and programmatically using Java or WLST Python scripts.For customization development we can use the features to e.g. manage the deployed customization in MDS, control logging levels, automate deployment of dependent libraries etc. This article is an introduction on how to access and use the WLS MBeans. The goal is to illustrate the various access methods in a single article; the details of the features are left to the linked documentation.This article covers Windows based environment, steps for Linux would be similar however there would be some differences e.g. on how the file paths are defined. MBeansThe WLS MBeans can be categorized to runtime and configuration MBeans.The Runtime MBeans can be used to access the runtime information about the server and its resources. The data from runtime beans is only available while the server is running. The runtime beans can be used to e.g. check the state of the server or deployment.The Configuration MBeans contain information about the configuration of servers and resources. The configuration of the domain is stored in the config.xml file and the configuration MBeans can be used to access and modify the configuration data. For more information on the WLS MBeans refer to: Understanding WebLogic Server MBeans WLS MBean reference Java Management Extensions (JMX)We can use JMX APIs to access the WLS MBeans. This allows us to create Java programs to configure, monitor, and manage WLS resources. In order to use the WLS MBeans we need to add the following library into the class-path: WL_HOME\lib\wljmxclient.jar Connecting to a WLS MBean server The WLS MBeans are contained in a Mbean server, depending on the requirement we can connect to (MBean Server / JNDI Name): Domain Runtime MBean Server weblogic.management.mbeanservers.domainruntime Runtime MBean Server weblogic.management.mbeanservers.runtime Edit MBean Server weblogic.management.mbeanservers.edit To connect to the WLS MBean server first we need to create a map containing the credentials; Hashtable<String, String> param = new Hashtable<String, String>(); param.put(Context.SECURITY_PRINCIPAL, "weblogic");        param.put(Context.SECURITY_CREDENTIALS, "weblogic1");        param.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote"); These define the user, password and package containing the protocol. Next we create the connection: JMXServiceURL serviceURL =     new JMXServiceURL("t3","127.0.0.1",7101,     "/jndi/weblogic.management.mbeanservers.domainruntime"); JMXConnector connector = JMXConnectorFactory.connect(serviceURL, param); MBeanServerConnection connection = connector.getMBeanServerConnection(); With the connection we can now access the MBeans for the WLS instance. For a complete example see Appendix A of this post. For more details refer to Accessing WebLogic Server MBeans with JMX Accessing WLS MBeans The WLS MBeans are structured hierarchically; in order to access content we need to know the path to the MBean we are interested in. The MBean is accessed using “MBeanServerConnection. getAttribute” API.  WLS provides entry points to the hierarchy allowing us to navigate all the WLS MBeans in the hierarchy (MBean Server / JMX object name): Domain Runtime MBean Server com.bea:Name=DomainRuntimeService,Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean Runtime MBean Servers com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean Edit MBean Server com.bea:Name=EditService,Type=weblogic.management.mbeanservers.edit.EditServiceMBean For example we can access the Domain Runtime MBean using: ObjectName service = new ObjectName( "com.bea:Name=DomainRuntimeService," + "Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean"); Same syntax works for any “child” WLS MBeans e.g. to find out all application deployments we can: ObjectName domainConfig = (ObjectName)connection.getAttribute(service,"DomainConfiguration"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); Alternatively we could access the same MBean using the full syntax: ObjectName domainConfig = new ObjectName("com.bea:Location=DefaultDomain,Name=DefaultDomain,Type=Domain"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); For more details refer to Accessing WebLogic Server MBeans with JMX Invoking operations on WLS MBeans The WLS MBean operations can be invoked with MBeanServerConnection. invoke API; in the following example we query the state of “AppsLoggerService” application: ObjectName appRuntimeStateRuntime = new ObjectName("com.bea:Name=AppRuntimeStateRuntime,Type=AppRuntimeStateRuntime"); Object[] parameters = { "AppsLoggerService", "DefaultServer" }; String[] signature = { "java.lang.String", "java.lang.String" }; String result = (String)connection.invoke(appRuntimeStateRuntime,"getCurrentState",parameters, signature); The result returned should be "STATE_ACTIVE" assuming the "AppsLoggerService" application is up and running. WebLogic Scripting Tool (WLST) The WebLogic Scripting Tool (WLST) is a command-line scripting environment that we can access the same WLS MBeans. The tool is located under: $MW_HOME\oracle_common\common\bin\wlst.bat Do note that there are several instances of the wlst script under the $MW_HOME, each of them works, however the commands available vary, so we want to use the one under “oracle_common”. The tool is started in offline mode. In offline mode we can access and manipulate the domain configuration. In online mode we can access the runtime information. We connect to the Administration Server : connect("weblogic","weblogic1", "t3://127.0.0.1:7101") In both online and offline modes we can navigate the WLS MBean using commands like "ls" to print content and "cd" to navigate between objects, for example: All the commands available can be obtained with: help('all') For details of the tool refer to WebLogic Scripting Tool and for the commands available WLST Command and Variable Reference. Also do note that the WLST tool can be invoked from Java code in Embedded Mode. Running Scripts The WLST tool allows us to automate tasks using Python scripts in Script Mode. The script can be manually created or recorded by the WLST tool. Example commands of recording a script: startRecording("c:/temp/recording.py") <commands that we want to record> stopRecording() We can run the script from WLST: execfile("c:/temp/recording.py") We can also run the script from the command line: C:\apps\Oracle\Middleware\oracle_common\common\bin\wlst.cmd c:/temp/recording.py There are various sample scripts are provided with the WLS instance. UI to Access the WLS MBeans There are various UIs through which we can access the WLS MBeans. Oracle Enterprise Manager Fusion Middleware Control Oracle WebLogic Server Administration Console Fusion Middleware Control MBean Browser In the integrated JDeveloper environment only the Oracle WebLogic Server Administration Console is available to us. For more information refer to the documentation, one noteworthy feature in the console is the ability to record WLST scripts based on the navigation. In addition to the UIs above the JConsole included in the JDK can be used to access the WLS MBeans. The JConsole needs to be started with specific parameter to force WLS objects to be used and jar files in the classpath: "C:\apps\Oracle\Middleware\jdk160_24\bin\jconsole" -J-Djava.class.path=C:\apps\Oracle\Middleware\jdk160_24\lib\jconsole.jar;C:\apps\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\apps\Oracle\Middleware\wlserver_10.3\server\lib\wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote For more details refer to the Accessing Custom MBeans from JConsole. Summary In this article we have covered various ways we can access and use the WLS MBeans in context of integrated WLS in JDeveloper to be used for Fusion Application customization development. References Developing Custom Management Utilities With JMX for Oracle WebLogic Server Accessing WebLogic Server MBeans with JMX WebLogic Server MBean Reference WebLogic Scripting Tool WLST Command and Variable Reference Appendix A package oracle.apps.test; import java.io.IOException;import java.net.MalformedURLException;import java.util.Hashtable;import javax.management.MBeanServerConnection;import javax.management.MalformedObjectNameException;import javax.management.ObjectName;import javax.management.remote.JMXConnector;import javax.management.remote.JMXConnectorFactory;import javax.management.remote.JMXServiceURL;import javax.naming.Context;/** * This class contains simple examples on how to access WLS MBeans using JMX. */public class BlogExample {    /**     * Connection to the WLS MBeans     */    private MBeanServerConnection connection;    /**     * Constructor that takes in the connection information for the      * domain and obtains the resources from WLS MBeans using JMX.     * @param hostName host name to connect to for the WLS server     * @param port port to connect to for the WLS server     * @param userName user name to connect to for the WLS server     * @param password password to connect to for the WLS server     */    public BlogExample(String hostName, String port, String userName,                       String password) {        super();        try {            initConnection(hostName, port, userName, password);        } catch (Exception e) {            throw new RuntimeException("Unable to connect to the domain " +                                       hostName + ":" + port);        }    }    /**     * Default constructor.     * Tries to create connection with default values. Runtime exception will be     * thrown if the default values are not used in the local instance.     */    public BlogExample() {        this("127.0.0.1", "7101", "weblogic", "weblogic1");    }    /**     * Initializes the JMX connection to the WLS Beans     * @param hostName host name to connect to for the WLS server     * @param port port to connect to for the WLS server     * @param userName user name to connect to for the WLS server     * @param password password to connect to for the WLS server     * @throws IOException error connecting to the WLS MBeans     * @throws MalformedURLException error connecting to the WLS MBeans     * @throws MalformedObjectNameException error connecting to the WLS MBeans     */    private void initConnection(String hostName, String port, String userName,                                String password)                                 throws IOException, MalformedURLException,                                        MalformedObjectNameException {        String protocol = "t3";        String jndiroot = "/jndi/";        String mserver = "weblogic.management.mbeanservers.domainruntime";        JMXServiceURL serviceURL =            new JMXServiceURL(protocol, hostName, Integer.valueOf(port),                              jndiroot + mserver);        Hashtable<String, String> h = new Hashtable<String, String>();        h.put(Context.SECURITY_PRINCIPAL, userName);        h.put(Context.SECURITY_CREDENTIALS, password);        h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,              "weblogic.management.remote");        JMXConnector connector = JMXConnectorFactory.connect(serviceURL, h);        connection = connector.getMBeanServerConnection();    }    /**     * Main method used to invoke the logic for testing     * @param args arguments passed to the program     */    public static void main(String[] args) {        BlogExample blogExample = new BlogExample();        blogExample.testEntryPoint();        blogExample.testDirectAccess();        blogExample.testInvokeOperation();    }    /**     * Example of using an entry point to navigate the WLS MBean hierarchy.     */    public void testEntryPoint() {        try {            System.out.println("testEntryPoint");            ObjectName service =             new ObjectName("com.bea:Name=DomainRuntimeService,Type=" +"weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");            ObjectName domainConfig =                (ObjectName)connection.getAttribute(service,                                                    "DomainConfiguration");            ObjectName[] appDeployments =                (ObjectName[])connection.getAttribute(domainConfig,                                                      "AppDeployments");            for (ObjectName appDeployment : appDeployments) {                String resourceIdentifier =                    (String)connection.getAttribute(appDeployment,                                                    "SourcePath");                System.out.println(resourceIdentifier);            }        } catch (Exception e) {            throw new RuntimeException(e);        }    }    /**     * Example of accessing WLS MBean directly with a full reference.     * This does the same thing as testEntryPoint in slightly difference way.     */    public void testDirectAccess() {        try {            System.out.println("testDirectAccess");            ObjectName appDeployment =                new ObjectName("com.bea:Location=DefaultDomain,"+                               "Name=AppsLoggerService,Type=AppDeployment");            String resourceIdentifier =                (String)connection.getAttribute(appDeployment, "SourcePath");            System.out.println(resourceIdentifier);        } catch (Exception e) {            throw new RuntimeException(e);        }    }    /**     * Example of invoking operation on a WLS MBean.     */    public void testInvokeOperation() {        try {            System.out.println("testInvokeOperation");            ObjectName appRuntimeStateRuntime =                new ObjectName("com.bea:Name=AppRuntimeStateRuntime,"+                               "Type=AppRuntimeStateRuntime");            String identifier = "AppsLoggerService";            String serverName = "DefaultServer";            Object[] parameters = { identifier, serverName };            String[] signature = { "java.lang.String", "java.lang.String" };            String result =                (String)connection.invoke(appRuntimeStateRuntime, "getCurrentState",                                          parameters, signature);            System.out.println("State of " + identifier + " = " + result);        } catch (Exception e) {            throw new RuntimeException(e);        }    }}

  Read the article

• Survey Probes the Project Management Concerns of Financial Services Executives

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Do you wonder what are the top reasons why large projects in the financial industry fail to meet budgets, schedules, and other key performance criteria? Being able to answer this question can provide important insight and value of good project management practices for your organization. According to 400 senior executives who participated in a new survey conducted by the Economist Intelligence Unit and sponsored by Oracle, unrealistic project goals is the main reason for roadblocks to success Other common stumbling blocks are poor alignment between project and organizational goals, inadequate human resources, lack of strong leadership, and unwillingness among team members to point out problems. This survey sample also had a lot to say about the impact of regulatory compliance on the overall portfolio management process. Thirty-nine percent acknowledged that regulations enabled efficient functioning of their businesses. But a similar number said that regulations often require more financial resources than were originally allocated to bring projects in on time. Regulations were seen by 35 percent of the executives as roadblocks to their ability to invest in the organization’s growth and success. These revelations among others are discussed in depth in a new on-demand Webcast titled “Too Good to Fail: Developing Project Management Expertise in Financial Services” now available from Oracle. The Webcast features Brian Gardner, editor of the Economist Intelligence Unit, who presents these findings from this survey along with Guy Barlow, director of industry strategy for Oracle Primavera. Together, they analyze what the numbers mean for project and program managers and the financial services industry. Register today to watch the on-demand Webcast and get a full rundown and analysis of the survey results. Take the Economist Intelligence Unit benchmarking survey and see how your views compare with those of other financial services industry executives in ensuring project success.  Read more in the October Edition of the quarterly Information InDepth EPPM Newsletter

  Read the article

• Part 2: Career development as a Software Developer without becoming a manager.

  - by albertpascual

  Seems like my previous post inspired by the work of Michael “Doc” Norton was a great success for the amount of emails I have received. Yet amazed how many people didn’t want to discuss their questions in the comments  sections. I would encourage people to be more public, still I would like to reply to all of you on this public media. I still welcome those emails. What I found out is that many people feels like me, they want to be developers and still be compensated for their experience without wanting to take a job as a manager. Their perfect day is a full day of coding and learning. Many believe their companies will never pay a manager’s salary to a developer no matter what. Most of you ask how to get the ball rolling. And is the later that I’m addressing here, the previous group, will never try. What companies understand developers value and where can I find them? This is a very difficult question to ask, I don’t have a list of those companies or departments, I have seen in my past signs in companies bending backwards to compensate, in more ways the monetary, a developer that is a good resource to them. Allowing the person to move out of the state and still let them work for the company from home is a sign that company goes by individual cases. Allowing them to go to conference that will not benefit the company is another big sign. Simple signs like flexible hours and letting some people work from home. To see those signs you need to be working in that company for awhile and look at the departments where the manager is taking care of their employees in individual cases. Look for the department where people get quiet extra perks, where some people in the department work from home or remotely. In my experience, but not always true, medium to big companies, are prompt to recognize good developers. Then again, some companies just don’t get it and is when you see many technical people managing developers. For all the people that email me stating that developers can also be very good managers, I do not disagree, I just think that a good developers loves writing code, when you remove that part the better salary isn’t enough to keep a developer happy. Burned out developers appreciate being promoted to managers. How do I know I work in a bad company? In my experience I have been a consultant and seen many companies, a few signs I have learned about companies that will not recognize good developers are: When the turn over is pretty high, when developers are moving out in a big rate, no rocket scientist needs to tap you in the shoulder. When the company is looking always to outsource their development resources. The product is not that interesting nor the company cares too much for their final result and support. Code sweat shops. You’ll know when you start working in one of those. Run for the hills! Where do I start? Disclaimer: I have only based this post on Michael “Doc” Norton, this is just my interpretation and ideas. First thing is to look at Michael “Doc” Norton presentation Take Control of Your Development Career http://docondev.blogspot.com/ That should be the first thing any developer should look and follow like it was a pattern. I would personally recommend to find some language or pattern you are interested with and learn it, learn something that will make you happy. Second, join a User Group and get involve in the community. There are hundreds of user groups, and I’m sure you’ll find one in your city or near you town. Code Camps are Developers Meet Ups are also good resources. Third, I would join a open source project you are interested or better yet, create a new open source project with the new technology that you have learn and get coding. Fourth, create a Twitter account and follow the people that talks about the technology you are interested on. If you follow this 4 steps above I think you’ll be on your way, after they are complete, when you release your Open Source project you can say that you accomplished the first steps. Now, do not expect anything to change in your career life, you are changing and should not expect anything in return, besides borrowing some time from sleeping and your family. Creating a good schedule may help you, I find wasted time in many places that I use. Flying for work is actually one of those that allows me to do my best work on a airplane, don’t need to borrow time from anywhere else. Making sure you always have a light, charged laptop is so important. Next steps following the Michael “Doc” Norton Pattern or my interpretation of. First, help run a user group or better yet, start a new user group. I’ll add, as well, go to one conference a year and free development events around your city; Code Camps, Geek Dinners, etc. There are many free events sponsored by different companies for developers to get to know their products, I highly recommend those as the way to get connected. Second, chose a mentor, this is a very hard thing to do I experienced, find an expert in the technology you are learning that has the time for you, it is difficult, I wish you best of luck. Third, learn another technology or pattern, open your horizons a little bit more. Why not, if you had fun previously, keep doing it. Fourth, get involved in forums to answer and ask questions, getting notice in public forums is rewarding for your ego after such a long journey. Final steps following the Michael “Doc” Norton Pattern Teach what you know, become humble on your knowledge, find as many opportunities to teach and to get involved with the community, bring all that to your day job. Mr. Norton talks about getting naked, expose yourself to others in your knowledge and what you do not know. You are never too important for small opportunities, yet don’t  be afraid to take anything big and learn from the experience. Anytime you have the opportunity to talk to somebody that has reach the point the community knows his or her name, means that you should learn from it. Take opportunities that won’t make you money, yet will make you happy. Sometimes you need to spend money and time. Register talks in Code Camps and Dev Meet Ups, those are free, also go to Conference, Development Summits and Geek Diners for example. One day, people will pay you to attend. When will all these pay off? I don’t know. I’m still in the path, there are a few things that during your journey you may get little acknowledgements that you are in the correct path. In my case I think those are the little signs that tells you about your journey. I got awarded the Microsoft Most Valuable Professional for ASP.NET in 2007, 2008, 2009 and 2010. I got selected to speak at the DevConnections in Las Vegas in 2010 and Orlando 2011. I do believe that I do have a long way to go, yet what I do makes me happy and I hope I can keep doing for years to come. Every year I can see an improvement on my code, and more frameworks and languages are under my belt, I learn to embrace them all as well as in my daily job, I have been able to work in a few projects beyond my department. I’m a learner and believer of the Michael “Doc” Norton pattern. Looking forward to learn more about it to be able to apply it better. In my short journey I now see my mistakes, I did a few things right, I have been listening the intelligent people and not being afraid to move along the technology changes. In my professional life, I have tried to avoid being placed in only one technology and product. I have always share my code and never confused anybody that wanted to take over any of my projects, I didn’t think anything I created as my own nor care too much when politics didn’t see my vision. I stayed flexible, ready and visible, yet humble. I keep my head just below the clouds, and avoided managers meetings. I credit my manager for my success, and I faulted publicly only myself for the failures. Hope this helps. Cheers, Al Follow me in Twitter  Read my previous post tweetmeme_url = 'http://weblogs.asp.net/albertpascual/archive/2010/12/09/part-2-career-development-as-a-software-developer-without-becoming-a-manager.aspx'; tweetmeme_source = 'alpascual';

  Read the article

• CodePlex Daily Summary for Friday, March 19, 2010

  CodePlex Daily Summary for Friday, March 19, 2010New Projects[Tool] Vczh Visual Studio UnitTest Coverage Analyzer: Analyzing Visual Studio Unittest Coverage Exported XML filecrudwork is a library of reuseable classes for developing .NET applications: crudwork is a collection of reuseable .NET classes and features. If you searched for StpLibrary and landed here, you're in the right place. Origi...CWU Animated AVL Tree Tutorial: This is a silverlight demo of a self-balancing AVL tree. On the original team were CWU undergraduates Eric Brown, Barend Venter, Nick Rushton, Arry...DotNetNuke® Skin Modern: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skin Monster: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Jon Edwards of SlumtownHero.co.za. This package uses totally tab...DotNetNuke® Skin Synapse: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Exionyte Solutions. This package features 2 colors with 4...earthworm: Earthworm is a pet project intended as a repository of data access logic, including some ORM, state management and bridging the gap between connect...ema: EMA is a place for collaborative effort to implement a PowerGrid game engine. For more info on PowerGrid the board game see: http://www.boardgamege...Extended SharePoint Web Parts: Extending capabilities of existing SharePoint 2007 Web Parts by inheriting and alterFreedomCraft: Craft development siteG.B SecondLife Sculpter: This is a Sculptor for "secondlife"InfoPath Error Viewer: InfoPath Error Viewer provides an intuitive list to show all errors in the entire InfoPath form. You'll no longer have to find the validation error...LEET (LEET Enhances Exploratory Testing): LEET is a capture-replay tool based on Microsoft’s User Interface Automation Framework. It is targeted at agile teams, and provides support for us...Linq To Entity: Linq,Linq to Entity,EntityMACFBTest: This is a test for a Facebook application.MetaProperties: MetaProperties helps you to create event driven architectures in .NET. It saves you time and it helps you avoid mistakes. It's compatible with WPF ...ownztec web: projeto da ownztec.comParallel Programming Guide: Content for the latest patterns & practices book on design patterns for parallel programming. Downloadable book outline and draft chapters as well ...Perseus - Sistema de Matrícula On-Line: Sistema de matrícula desenvolvido pelo 5º período de Desenvolvimento Web da FACECLA.Project Tru Tiên: Project EL tru tiên, ZhuxianProSysPlus.Net Framework: How do I get the ease and efficiency of my work in VFP (R.I.P. 2010)? The answer is here: the ProSysPlus.Net Framework. Why is it open source? Wh...Quick Anime Renamer: Originally included with AniPlayer X, Quick Anime Renamer easily renames your anime files into a "cleaner" format so you wont get retinal detachment.Simple XNA Button: This is a project of a helper for instancing Simple Buttons in XNA with a ButtonPanel. Its got various features like. Load a Panel from a Plain Tex...SteelVersion - Monitor your .NET Application versioning: SteelVersion helps you to find and store versioning information about .NET assemblies ("Explorer" mode). It also makes it easier to continuously ch...Stellar Results: Astronomical Tracking System for IUPUI CSCI506 - Fall 2007, Team2TheHunterGetsTheDeer: first AIwandal: wandalWeb App Data Architect's CodeCAN: Contains different types of code samples to explore different types of technical solutions/patterns from an architect's point of view.Yet Another GPS: Yet another GPS tracker is a very powerful GPS track application for Windows MobileNew ReleasesASP.Net Client Dependency Framework: v1.0 RC1: ASP.Net Client Dependency has progressed to release candidate 1. With the community feedback and bug reports we've been able to make some great upd...C# FTP Library: FTPLib v1.0.1.1: This release has a couple of small bug fixes as well as the new abilities to specify a port to connect to and to create a new directory with the Cr...crudwork is a library of reuseable classes for developing .NET applications: crudwork 2.2.0.1: crudwork 2.2.0.1 (initial version)DotNetNuke® Skin Modern: Modern Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skinning Extensions: Nav Menu Demo Skins: This very basic skin demonstrates: 1. How to force NAV menu to generate an unordered list menu 2. The creation of a sub menu, both horizontal and ...DotNetNuke® XML: 04.03.05: XML/XSL Module 04.03.05 Release Candidate This is a maintainace release. Full Quallified Namespace avoids conflicts with Namespaces used by Teler...eCommerce by Onex Community Edition: Installer of eCommerce by Onex Community 1.0: Installer of eCommerce by Onex Community 1.0 Last changes: Added integration with Paypal Corrected of adding photos and attachments to products ...eCommerce by Onex Community Edition: Source code of eCommerce by Onex Community 1.0: Changes in version 1.0: Added integration with Paypal Corrected of adding photos and attachments to products Fixed problem with cancellation of...Employee Info Starter Kit: v2.2.0 (Visual Studio 2005-2008): This is a starter kit, which includes very simple user requirements, where we can create, read, update and delete (CRUD) the employee info of a com...Employee Info Starter Kit: v4.0.0.alpha (Visual Studio 2010): Employee Info Starter Kit is a ASP.NET based web application, which includes very simple user requirements, where we can create, read, update and d...Encrypted Notes: Encrypted Notes 1.4: This is the latest version of Encrypted Notes (1.4). It has an installer - it will create a directory 'CPascoe' in My Documents. Once you have ext...Extended SharePoint Web Parts: ContentQueryAdvanced: This .wsp file contains a single web part ContentQueryAdvanced. This web part inherits from ContentQuery web part and adds a ToolPart field for a ...Extended SharePoint Web Parts: Source Code: Zip file includes all the source code used to extend Content Query Web Part, adding a Tool Part field to insert a CAML query/filter/sortFacebook Developer Toolkit: Version 3.02: Updated copyright. No new functionality. Version 3.1 in the works.fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 (final): fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclient: you can use it to test the install...InfoPath Error Viewer: InfoPath Error Viewer 1.0: This is an intial version of this tool. You can: 1. View all errors in a list. 2. Locate to a binding control of an error field. 3. See the detai...LEET (LEET Enhances Exploratory Testing): LEET Alpha: The first public release of LEET includes the ability to record tests from running GUIs, assist in writing tests manually from a running GUI, edit ...Linq To Entity: Linq to Entity: The Entity Framework enables developers to work with data in the form of domain-specific objects and properties, such as customers and customer add...MDownloader: MDownloader-0.15.8.56699: Fixed peformance and memory usage. Fixed Letitbit provider. Added detecting IMDB, NFO, TV.com... links in RSS Monitor. Supported password len...MetaProperties: MetaProperties 1.0.0.0: This is a multi-targeted release of MetaProperties for the desktop and Silverlight versions of the .NET framework. The desktop version is fully ...Nito.KitchenSink: Version 2: Added a cancelable Stream.CopyTo. Depends on Nito.Linq 0.2. Please report any issues via the Issue Tracker.Project Server 2007 Timesheet AutoStatus Plus: AutoStatusPlus 1.0.1.0: AutoStatusPlus 1.0.1.0 Supported Systems x86 and x64 Project Server 2007 deployments with or without MOSS 2007 Recommended Patchlevels WSS 3.0: ...Project Tru Tiên: Elements-test V1: Mô tả Bản elements.data - có full ID của bản Elemens.data Tru tiên 2 VIệt Nam (V37) - có full ID của bản Elements.data server offline tru tiên (hiệ...Quick Anime Renamer: Quick Anime Renamer v0.1: AniPlayer X v1.4.5 - started 3/18/2010Initial Release!QuickieB2B: Quickie v1.0b: QuickieB2B - made for DEV4FUN competition organized by Microsoft CroatiaSilverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.2: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Simple XNA Button: XNA Button 1.0: The Main Project. this uses XNA 3.0 but it can be build with lower versions of XNA Framework. This was made using Visual Studio 2008.StoryQ: StoryQ 2.0.3 Library and Converter UI: New features in this release: Tagging and a tag-capable rich html report. The code generator is capable of generating entire classes This relea...The Silverlight Hyper Video Player [http://slhvp.com]: Version 1.0: Version 1.0VCC: Latest build, v2.1.30318.0: Automatic drop of latest buildWord Index extracts words or sentences from Word document according to patterns: Word Index 1.0.1.0 (For Word 2007 and Word 2003): Word Index for Word 2007 & 2003 : WordIndex.msi (Win-Installer Setup for Word Index) Source code : wordindex.codeplex.comV1.0.1.0.zip : (Source co...Yet Another GPS: YAGPS-Alfa.1: Yet another GPS tracker is a very powerful GPS track application for Windows MobileMost Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPjQuery Library for SharePoint Web ServicesDirectQOpen Data App Framework (ODAF)patterns & practices – Enterprise LibraryBlogEngine.NETPHPExcelNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• SQL SERVER – Automation Process Good or Ugly

  - by pinaldave

  This blog post is written in response to T-SQL Tuesday hosted by SQL Server Insane Asylum. The idea of this post really caught my attention. Automation – something getting itself done after the initial programming, is my understanding of the subject. The very next thought was – is it good or evil? The reality is there is no right answer. However, what if we quickly note a few things, then I would like to request your help to complete this post. We will start with the positive parts in SQL Server where automation happens. The Good If I start thinking of SQL Server and Automation the very first thing that comes to my mind is SQL Agent, which runs various jobs. Once I configure any task or job, it runs fine (till something goes wrong!). Well, automation has its own advantages. We all have used SQL Agent for so many things – backup, various validation jobs, maintenance jobs and numerous other things. What other kinds of automation tasks do you run in your database server? The Ugly This part is very interesting, because it can get really ugly(!). During my career I have found so many bad automation agent jobs. Client had an agent job where he was dropping the clean buffers every hour Client using database mail to send regular emails instead of necessary alert related emails The best one – A client used new Missing Index and Unused Index scripts in SQL Agent Job to follow suggestions 100%. Believe me, I have never seen such a badly performing and hard to optimize database. (I ended up dropping all non-clustered indexes on the development server and ran production workload on the development server again, then configured with optimal indexes). Shrinking database is performance killer. It should never be automated. SQL SERVER – Shrinking Database is Bad – Increases Fragmentation – Reduces Performance The one I hate the most is AutoShrink Database. It has given me hard time in my career quite a few times. SQL SERVER – SHRINKDATABASE For Every Database in the SQL Server Automation is necessary but common sense is a must when creating automation. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Silverlight Cream for November 20, 2011 - 2 -- #1170

  - by Dave Campbell

  In this Issue: Michael Washington, Oliver Fuh, Jeremy Likness, Derik Whittaker, Jesse Liberty, Jeff Blankenburg(-2-), and Michael Crump. Above the Fold: Silverlight: "Handling Extremely Large Data Sets in Silverlight" Jeremy Likness WP7: "31 Days of Mango | Day #8: Contacts API" Jeff Blankenburg LightSwitch: "LightSwitch Chat Application Using A Data Source Extension" Michael Washington Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up Check out Shawn Wildermuth's take on the AppStore and WP7 in general: 40,000 Apps - What Does It Mean? Be sure to check out Jesse Liberty & Paul Betts new book: Programming Reactive Extensions and LINQ, I've just had a little time to look at mine, but don't let the size fool you... this is the good stuff! From SilverlightCream.com: LightSwitch Chat Application Using A Data Source Extension In his latest LightSwitch post, Michael Washington gives up code that will enable two people using the same LightSwitch app to chat. Great detailed tutorial as usual! Handling AdControl Fetching Exception WindowsPhoneGeek turns the blog reigns over to Oliver Fuh for this post about using the AdControl in your WP7 app and handling a common exception you get with the Microsoft AdControl Handling Extremely Large Data Sets in Silverlight In this excerpt from his book, Jeremy Likness discusses reading *LARGE* data sets with Silverlight using 3 different patterns: OData, WCF RIA Services, and MVVM. Using MVVM with the AutoCompleteTextBox in Silverlight 4 Derik Whittaker takes a break from WinRT to discuss the Silverlight 4 AutoCompleteTextBox and MVVM ... including a custom Behavior to allow the backing property to be updated and a command to trigger background searches Yet Another Podcast #52–Peter Torr on Windows Phone Multitasking Jesse Liberty scored Peter Torr on his Latest Yet Another Podcast .. talking about Multitasking on Windows Phone including background agents, the backstack, and other Mango features 31 Days of Mango | Day #8: Contacts API Jeff Blankenburg's Day 8 is about a new namespace on WP7: Microsoft.Phone.UserData ... now giving us the ability to treat the user's contact list like a local database 31 Days of Mango | Day #9: Calendar API On Day 9 in his series, Jeff Blankenburg revisits the Microsoft.Phone.UserData namespace and looks at another set of data: the calendar Want to Decompile Silverlight XAP files? Try JustDecompile Beta! Michael Crump has a post up about the new free developer productivity tool from Telerik that provides assembly browsing and decompiling: JustDecompile ... Just download it! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Oracle anuncia resultados de Q3 FY10

  - by Paulo Folgado

  Oracle Reports GAAP EPS of $0.23, Non-GAAP EPS of $0.38New Software Licenses Up 13%, Applications New Licenses Up 21%Oracle Corporation today announced fiscal 2010 Q3 GAAP total revenues were up 17% to $6.4 billion, while non-GAAP total revenues were up 18% to $6.5 billion. Excluding the impact of Sun Microsystems, Inc., which Oracle acquired on January 26, 2010, GAAP total revenue grew 7%. GAAP new software license revenues were up 13% to $1.7 billion, and up 10% to $1.7 billion excluding Sun. GAAP software license updates and product support revenues were up 13% to $3.3 billion, while non-GAAP software license updates and product support revenues were up 12% to $3.3 billion. GAAP operating income was down 5% to $1.8 billion, and GAAP operating margin was 29%. Non-GAAP operating income was up 13% to $2.9 billion, and non-GAAP operating margin was 45%. GAAP net income was down 10% to $1.2 billion, while non-GAAP net income was up 9% to $1.9 billion. GAAP earnings per share were $0.23, down 11% compared to last year while non-GAAP earnings per share were up 9% to $0.38. GAAP operating cash flow on a trailing twelve-month basis was $8.2 billion. "Our solid top line growth, coupled with disciplined expense management, was key in generating $8.0 billion of free cash flow over the last twelve months," said Oracle CFO Jeff Epstein."The Sun integration is going even better than we expected," said Oracle President, Safra Catz. "We believe that Sun will make a significant contribution to our fourth quarter earnings per share as well as meet the profitability goals we set for next year.""Exadata is the fastest growing product in Oracle's history," said Oracle President, Charles Phillips. "Introduced a little over a year ago, the Exadata pipeline is now approaching $400 million with Q4 bookings forecast at nearly $100 million. This strengthens both sales growth and profitability in our Sun server and storage businesses.""Every quarter we grab huge chunks of market share from SAP," said Oracle CEO, Larry Ellison. "SAP's most recent quarter was the best quarter of their year, only down 15%, while Oracle's application sales were up 21%. But SAP is well ahead of us in the number of CEOs for this year, announcing their third and fourth, while we only had one."In addition, Oracle's Board of Directors declared a cash dividend of $0.05 per share of outstanding common stock to be paid to stockholders of record as of the close of business on April 14, 2010, with a payment date of May 5, 2010. Future declarations of quarterly dividends and the establishment of future record and payment dates are subject to the final determination of Oracle's Board of Directors.Q3 Earnings Conference Call and WebcastOracle will hold a conference call and web broadcast today to discuss these results at 2:00 p.m. Pacific. You may listen to the call by dialing (800) 214-0694 or (719) 955-1425, Passcode: 567035. To access the live Web broadcast of this event, please visit the Oracle Investor Relations Web site at http://www.oracle.com/investor.

  Read the article

• Windows Azure Use Case: Infrastructure Limits

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx  Description: Physical hardware components take up room, use electricity, create heat and therefore need cooling, and require wiring and special storage units. all of these requirements cost money to rent at a data-center or to build out at a local facility. In some cases, this can be a catalyst for evaluating options to remove this infrastructure requirement entirely by moving to a distributed computing environment. Implementation: There are three main options for moving to a distributed computing environment. Infrastructure as a Service (IaaS) The first option is simply to virtualize the current hardware and move the VM’s to a provider. You can do this with Microsoft’s Hyper-V product or other software, build the systems and host them locally on fewer physical machines. This is a good option for canned-applications (where you have to type setup.exe) but not as useful for custom applications, as you still have to license and patch those servers, and there are hard limits on the VM sizes. Software as a Service (SaaS) If there is already software available that does what you need, it may make sense to simply purchase not only the software license but the use of it on the vendor’s servers. Microsoft’s Exchange Online is an example of simply using an offering from a vendor on their servers. If you do not need a great deal of customization, have no interest in owning or extending the source code, and need to implement a solution quickly, this is a good choice. Platform as a Service (PaaS) If you do need to write software for your environment, your next choice is a Platform as a Service such as Windows Azure. In this case you no longer manager physical or even virtual servers. You start at the code and data level of control and responsibility, and your focus is more on the design and maintenance of the application itself. In this case you own the source code and can extend or change it as you see fit. An interesting side-benefit to using Windows Azure as a PaaS is that the Application Fabric component allows a hybrid approach, which gives you a basis to allow on-premise applications to leverage distributed computing paradigms. No one solution fits every situation. It’s common to see organizations pick a mixture of on-premise, IaaS, SaaS and PaaS components. In fact, that’s a great advantage to this form of computing - choice. References: 5 Enterprise steps for adopting a Platform as a Service: http://blogs.msdn.com/b/davidmcg/archive/2010/12/02/5-enterprise-steps-for-adopting-a-platform-as-a-service.aspx?wa=wsignin1.0  Application Patterns for the Cloud: http://blogs.msdn.com/b/kashif/archive/2010/08/07/application-patterns-for-the-cloud.aspx

  Read the article

• Cloud Application Management for Platforms

  - by user756764

  Today Oracle, along with CloudBees, Cloudsoft, Huawei, Rackspace, Red Hat, and Software AG, published the Cloud Application Management for Platforms (CAMP) specification. This spec deals with application management in the context of PaaS. It defines a model (consisting of a set resources and their relationships), a REST-based API for manipulating that model, and a packaging format for getting applications (and their attendant metadata) into and out of the platform. My colleague, Mark Carlson, has already provided an excellent writeup on the spec here. The following, additional points bear emphasizing: CAMP is language, framework and platform neutral; it should be equally applicable to the task of deploying and managing Ruby on Rails applications as Java/Spring applications (as Node.js applications, etc.) CAMP only covers the interactions between a Cloud Consumer and a Cloud Provider (using the definitions of these terms provided in the NIST Cloud Computing Reference Architecture). The internal APIs used by the Cloud Provider to, for example, deploy additional platform services (e.g. a new message queuing service) are out of CAMP's scope. CAMP supports the management of the entire lifecycle of the application (e.g. start/stop, suspend/resume, etc.) not just the deployment of the components that make up the application. Complexity is the antithesis of interoperability. One of CAMP's goals is to be as broadly interoperable as possible. To this end, the authors of CAMP tried to "make things as simple as possible, but no simpler". For example, JSON is the only serialization format used in the spec (although Providers can extend this to support additional serialization formats such as XML). It remains to be seen whether we can preserve this simplicity as the spec is processed by OASIS. So far, those who have indicated an interest in collaborating on the spec seem to be of a like mind with regards to the need for simplicity. The flip side to simplicity is the knowledge that you undoubtedly missed something that is important to someone. To make up for this, CAMP is designed to be extensible. The idea is to ship what we know will work, allow implementers to extend the spec, then re-factor the spec to incorporate the most popular extensions. Anyone interested in this effort, particularly those of you using PaaS-level services, is encouraged to join the forthcoming OASIS TC. As you may have noticed, CAMP is a bit of a departure from some of the more monolithic management standards that have preceded it. The idea is to develop simple, discrete standards targeted to address specific interoperability and portability problems and tie these standards together with common patterns based on REST and HATEOAS. I'm excited to see how this idea plays out.

  Read the article

• Large File Upload in SharePoint 2010

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Okay this is a big BIG B-I-G problem. And with SP2010 it’s going to be more prominent, because atleast at the server side, SharePoint can support large files much much better than SharePoint 2007 ever did. The issue with very large files being uploaded through any browser based API are - Reliably transferring gigabyte or bigger files without breakages over a protocol like HTTP, which is better suited for tiny transfers like images and text. Not killing your browser because it has to load all that in memory Not killing your web server because All that you upload through HTTP post, first gets streamed into IIS Memory, w3wp.exe memory before the ENTIRE FILE finishes uploading .. before it is stored. Which means, You cannot show an accurate and live progress bar of the upload, IIS gives you no such accurate metric of an upload. All the counters it gives you are approximate. Your w3wp.exe eats up all server memory – 4GB of it, for a 4GB upload. A thread is kept busy for the entire duration of the upload, thereby greatly limiting your web server’s capability to serve newer requests. Kills effective load balancing. Not killing your content database because, As you are uploading a very large file, that large file gets written sequentially into the DB, and therefore for a very large file very severely impacts the database performance. I had put together another video showing RBS usage in SharePoint 2010. I talked about many practical ramifications of using RBS in SharePoint in that video. Note that enabling large file support will never ever be a point and click job, simply because there are too many questions one needs to ask, and too many things one needs to plan for. However, one part that will remain common across all large file upload scenarios, in SharePoint or outside of SharePoint is to do it efficiently while not killing the web server. In this video, I describe using the Telerik Silverlight Upload control with SharePoint 2010 to enable efficient large file uploads in SharePoint. Presenting .. The video Comment on the article ....

  Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >