Search Results

Search found 10789 results on 432 pages for 'cpu upgrade'.

Page 259/432 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

• How do i have 4GB of video memory with a 1GB video card?

  - by Tomas Spc Yaczik

  I ran the direct X diagnostic tool to take a look at my graphics capabilities and its telling me that the approximate video memory is clocked in at 4096MB. That doesn't make any sense, how is that possible? The only things that i can think of were that DirectX was inaccurate so i looked at the graphics statistics of my computer on CPU-Z which was included with the motherboard and that's telling me i have "negative" 1988MB. Not only is that not 4096MB, but its giving me a negative number and i know for a fact that you can't have a negative amount of memory???!!! The only things i can think of that would be amplifying my video memory output is the PCIe 3.0 bus, or that the motherboard is somehow including the on board video chip set with the video card which only then is only 2GB of video memory, which still has to be being amplified by something. Any suggestions?

  Read the article

• How to compare speed of graphics cards in Windows desktop environment?

  - by Al Kepp

  I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

  Read the article

• How to Enable Multirow Bookmarks Toolbar?

  - by IneedHelp

  I have tried using Multirow Bookmarks Toolbar Plus and Roomy Bookmarks Toolbar Firefox add-ons, but the problem is that they are constantly stressing my CPU (even when idling). It probably has something to do with version 11 of the browser. Anyway, is there some clean way to increase the height of the bookmarks toolbar and allow it to display bookmarks on multiple rows? I've read a lot of articles that refer to userChrome.css and I have tried a dozen solutions, but none worked because they were outdated. Please help me with this.

  Read the article

• Ubuntu server very slow out of the blue sky (Rails, passenger, nginx)

  - by snitko

  I run Ubuntu server 8.04 on Linode with multiple Rails apps under Passenger + nginx. Today I've noticed it takes quite a lot of time to load a page (5-10 secs). And it's not only websites, ssh seems to be affected too. Having no clue why this may be happening, I started to check different things. I checked how the log files are rotated, I checked if there's enough free disk space and memory. I also checked IO rate, here's the output: $ iostat avg-cpu: %user %nice %system %iowait %steal %idle 0.17 0.00 0.02 0.57 0.16 99.07 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn xvda 2.25 39.50 16.08 147042 59856 xvdb 0.00 0.05 0.00 192 0 xvdc 2.20 25.93 24.93 96530 92808 xvdd 0.01 0.12 0.00 434 16 xvde 0.04 0.23 0.35 858 1304 xvdf 0.37 0.31 4.12 1162 15352 Rebooting didn't help either. Any ideas where should I be looking?

  Read the article

• on Red Hat Enterprise and CentOS, what is creating /var/run/reboot-required?

  - by EdwardTeach

  On CentOS 5.8+ and Red Hat Enterprise 6+, when installing/updating packages, I notice a flag file /var/run/reboot-required is created when appropriate. On Ubuntu (and Debian too, I'm guessing), if package "update-notifier-common" is installed, a package postinst script triggers creation of this flag file. On RHEL/CentOS I can't figure out how this is happening. For instance, on RHEL and CentOS I recently installed several updates and /var/run/reboot-required was created. One of them was an "openssl" package upgrade. I assume this was what created the flag file, since on Ubuntu it also works this way. However I looked at all "rpm -q --scripts" for each updated package, and didn't see anything that was likely to have created that flag file. Mostly I saw "postinstall program: /sbin/ldconfig". So my questions are: What creates this flag file on RHEL/CentOS? Does it require a special package to be installed, analogous to the "update-notifier-common" package on Ubuntu?

  Read the article

• IIS 8 Random 503 service unavailable

  - by Ivo

  We migrated a busy website to Windows Server 2012 with IIS 8. The website randomly gives the error "503 service unavailable" after an user presses F5 the error is gone again. The website is build in ASP.NET MVC 3. The website runs on one application pool, with default settings There are around 500 to 900 concurrent users on the website during the day, and the error happens more often when there are more 650 users. The CPU and the memory use on the server is stable. There is nothing about the 503 errors in the application log, the IIS log and the event log. Does anyone has any clue what the problem can be or how we can trace the the problem?

  Read the article

• Where should executables be run from? Network share or client?

  - by user74150

  We have an executable that is used by 50+ client machines on a network and upgraded regularly. Is it acceptable to put the executable on a network share and have the client machines run it from there via a shortcut on their desktop? That way when we upgrade the .exe we can simply replace the one file with a new one and all clients will be accessing the new one. How will a slow or unstable network handle this? If this is not acceptable, what would be the best way to keep all clients updated with the latest .exe?

  Read the article

• Configure TV Capture card to not use external audio jack for TV audio output

  - by Adam D.

  I had this working with MythTV on Ubuntu 9.1. Then a power surge killed the motherboard. After replacing the motherboard, ram and cpu, the card does not produce any audio except through the output jack on the back of the card. I do not want to use a cable to go from the back of the card to the audio in on the built in sound card of the new mother board. FYI, the old motherboard did not have an on-board sound card. There was a separate audio card installed. There's some configuration that has to be done to have it work the same way again. I just have no idea where to start. This is regarding wintv hauppauge mythtv linux ubuntu 9.10 audio

  Read the article

• Enabling Surround sound on a Realtek ALC892 via SPDIF, on Windows 7

  - by Alex

  I have a problem with my ALC892, on an ASRock mainboard (ASRock 890FX Deluxe4). I get only stereo sounds if I use SPDIF connection, in general. My amp shows that is getting surround sound only when I use the Test feature of Windows 7. This test feature allows to know which formats are supported by the audio chip. The tests render correctly both Dolby Digital and DTS. You can find this test under Sounds, Playback Devices, Select Digital Audio, then "Properties". I am using Windows 7 x64, with the latest drivers from the official Realtek website. I also tested other driver versions, both from the Realtek website and from the ASRock one, but had no luck. Thanks for the help. Some specs: CPU: AMD Phenom II X4 965 MOBO: ASRock 890FX Deluxe4 (with onboard Realtek ALC892) Audio amp: Onkyo R-380 (works fine with other sources like PS3 and Xbox 360)

  Read the article

• Is there a Windows 7 add-on that will put the PID in the title bar of a window?

  - by Chris

  Occasionally I run many instances of something, like Chrome or Visual Studio. Rarely, but often enough to bug me, one of them gets hosed and starts to consume 100% CPU. I can fire up the task manager to see which process is using 100%, but if it just says chrome.exe or devenv.exe, I don't know which window is the culprit. I'd like to know before terminating the process, so I can activate the app and shut it down cleanly. The best I've found so far is to use Process Explorer's feature where I can right click a process and say "bring to front". But I am curious as to whether there is an app that will put the PID(s) right in the title bar of the window so I can tell which window matches the process. I am using Windows 7 64-bit.

  Read the article

• How to find out if the screen is WLED or RGBLED on Dell Studio XPS 16?

  - by Abhijeet

  I just ordered the Dell Studio XPS 16 with i7 and 16" RGBLED screen. This upgrade from WLED LCD to RGBLED LCD charged me more $$. But now when I view the order online, it lists this part as "320-8335 Premium FHD WLED Display, Obsidian Black, 2.0 MP Webcam". When called Dell, the rep says this part is RGBLED screen and the "premium" is for RGBLED. I want to make sure they are shipping me the RGBLED screen and not the WLED. Is there any way to verify this after I receive (either from Device Manager or BIOS or somewhere in system settings)? Also, is there any published specifications / criteria that we can run (some third party software) on this monitor which can tell if this is WLED or RGBLED?

  Read the article

• BES and BES Express co-existance

  - by ITGuy24

  Question: Can I deploy BES and BES Express with Exchange 2010? Any tips for doing this if possible? Background: We have a lot of users with personal BlackBerry's and we would like to allow them to start using their devices for receviing corporate email. We don't need full BES features for these users, just the ability to enforce passwords and remotely wipe. Plus users have never wanted to upgrade their data plans to the more expensive BES plans. So BES Express is a great fit. We already have an existing BES, for corporate owned BB's. We want to keep this as is allows us to enforce several policies, not available on BES Express.

  Read the article

• Xeon X5550 vs Six-core Opteron for database server

  - by gregmac

  I'm specing out a database server, and the price works out to be reasonably close between an Intel X5550 Quad-core and an AMD 2425HE (2.1Ghz) Six-core Opteron. I've been looking for some comparisons between the two, but the only thing useful I've found is an AnandTech Review of the 2435 which compares it to Intel Xeons, but concludes they both have their place. My load is MS SQL Server 2008, with an OLTP database that has about an equal amount of reading/writing (and it's a reasonably heavy load). So my question is, what is going to work better in this situation, assuming the drives are the same: Xeon X5550, with 16GB 1333Mhz RAM (Dell R510) or an Opteron 2425HE (2.1Ghz) or 2439SE (2.8Ghz) with 16GB of 800Mhz RAM? (Dell 2970) Note: the 2439 adds $500, but the overall pricing works out that it's not that much more than the R510. Using the 2425HE, the Dell 2970 server is slightly less than the similarly-equipped R510). If it adds a decent amount of performance, it's worthwhile to go faster. (single CPU, in both cases).

  Read the article

• moving to a new dedicated server and need advice on the new setup

  - by Eric Martin

  I currently have a dedicated server that we have outgrown and we are moving to another server. Our current setup was a 8gb W2008R2 server running a W2008R2 IIS virtual machine using VMWare. We are moving to a 2 cpu 24 gb server with W2012 R2 on Hyper-V. On our virtual machine we are running iis 7.5 and sql server. Sql Server seems to want to eat up all the memory so I had to cap it at 2gb, which doesn't seem sufficient. My question is, when I move the virtual machine to the new server, should I create 2 virtual machines, one for sql server and one for IIS? Or should I leave them both on the same virtual machine? Or even, put the Sql Server on the dedicated server and run the IIS in the vm? I'd like some input on how this should be done, I've not got the experience needed to make the right call. Thanks!

  Read the article

• Upgrading kernel on Debian server hosting Xen 3.2.1

  - by mitnosirrag

  I have a physical server running Debian 6 and Xen Hypervisor 3.2.1, and kernal -a says "2.6.26-1-xen-amd64". I have not updated for a long time, because when I run apt-get upgrade, one of the updates is linux-image-2.6-amd64. My understanding was that my kernel needs to have Xen support, will upgrading to this kernel break my dom0? I have myself up against a wall, because I host a VM for a website that isn't mine, so I need the latest security updates, but can't risk taking them offline. Eventually they will move off, and I won't be hosting something I am unqualified to host, but that isn't the point right now.

  Read the article

• Windows Server 2008 R2 Software Deployment on Active Directory - Schema Issue

  - by weedave

  We have two servers, one running Windows Server 2003 SP2 and one running Windows Server 2008 R2. Both servers have their own versions of Group Policy Management (1.0.2 on 2003 and 6.0.0.1 on 2008). We are wanting to migrate everything over to the newer 2008 server, including software deployment. However, when I try to add a new software package using a .msi file, I get the following error: "The schema for the software installation data in the Active Directory does not match the required schema." I have tried two separate software packages and get the same error on the 2008 server. However, when I do the same on the 2003 server, it adds the software package without any problems. The .msi files I am using are up-to-date - one is the most recent version of Google Chrome. Is this problem caused by the different versions of the OS, or the Group Policy Management program? How do we "upgrade" our Active Directory to allow software deployment on the 2008 server? Thanks.

  Read the article

• ClamAV eating up all available disk space

  - by Ra

  Today I found that my Redhat server has run out of hard disk space. The culprit seems to be a program called Clamav that fills /tmp directory with thousands of subfolders with names like clamav-004adb870cd79534. All these folders contain this: drwx------ 2 root root 4.0K Apr 21 07:56 . drwxrwxrwt 68 root root 64K Apr 21 08:03 .. -rw------- 1 root root 18K Apr 21 07:56 COPYING -rw------- 1 root root 4.6M Apr 21 07:56 main.db -rw------- 1 root root 14K Apr 21 07:56 main.fp -rw------- 1 root root 1.5M Apr 21 07:56 main.hdb -rw------- 1 root root 901 Apr 21 07:56 main.info -rw------- 1 root root 33M Apr 21 07:56 main.mdb -rw------- 1 root root 16M Apr 21 07:56 main.ndb -rw------- 1 root root 217 Apr 21 07:56 main.zmd When I deleted them they got back and filled my hard drive in about an hour again. How do I go about this? Can I safely stop Clamav? It seems to me that Clamav is trying to upgrade unsuccessfully.

  Read the article

• How can I uninstall AppFabric?

  - by downatone

  I recently upgraded from Win 7 - Win 8. AppFabric was not one of the programs that came up as being incompatible when I ran the upgrade wizard, so I did not uninstall it. Now whenever I goto "Add or remove features" I get the following error: --------------------------- Windows Server AppFabric Setup Wizard --------------------------- Windows Server AppFabric is not supported on current operating system Windows 8 Pro(version 6.2.9200.0). Please refer to installation guide for the list of supported operating systems. --------------------------- OK --------------------------- Unfortunately the only way to uninstall AppFabric is via the "Add or remove features" - does anyone know a commandline command to kick the uninstall so I can at least access "Add or remove features"? Edit: C:\Windows\System32\AppFabric\Setup.exe /remove Throws the same error as above.

  Read the article

• Apache Prefork Configuration

  - by user1618606

  I'm newbie on VPS configuration. So, I've installed apache, php and mysql and now I need to know how to configure Prefork to optimize Apache. The system configuration is: CPU Cores 2 x 2 Ghz @ 4 Ghz RAM Memory 2304 MB DDR3 Burst Memory 3 GB DDR3 Disk Space 30 GB SSD Bandwidth 3 TB SwitchPort 1 Gbps Actually, after linux, mysql, apache and php, there are 250 MB memory in use. Well, I don't have idea to calculate. I saw in some websistes, some vars like: KeepAlive On KeepAliveTimeout 1 MaxKeepAliveRequests 100 StartServers 15 MinSpareServers 15 MaxSpareServers 15 MaxClients 20 MaxRequestsPerChild 0 or StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 How I could to do: Prefork or worker? Where and how the vars are placed? In httpd.conf?

  Read the article

• fedora 11 server won't boot from SATA disk, won't boot from CD, BIOS configuration problems

  - by Tom

  Hi all, Yesterday our fc11 file/print server didn't boot, and had stopped on the BIOS page with a configuration problem. (with a distinct lack of foresight) I reset the BIOS settings to default without recording the message and booted the server. The server ran until it was to be booted this morning, and it was failing to mount the root partition from the SATA disk. It also failed to boot from a known good diagnostics CD. After a few more tries, it now fails part way through the Phoenix - AwardBIOS screen where it is listing the SATA/IDE devices, and it is showing garbage for the identity of one of the disks, which should actually be "none" It looks like the motherboard has gone kaput. The motherboard is an EVGA NF790i, are there any diagnostic tools that I can use to determine this? (as I would prefer to not send the motherboard back, only to discover that it is the RAM or the CPU) ps I can't get it to boot from the memTest disk, so I can't run that diagnostic. Thanks!

  Read the article

• System shuts down immediately after few sconds

  - by Anil

  I have a computer with following specification and was working fine after re-installing the system and refitting sink fan unit. Recently it shuts down automatically after a few seconds. I checked PSU by shorting pin no.s 13 & 14 as well as 14 & 15. It worked well means the PSU fan moves. But I never checked the voltages at different wires. I refitted the heat sink fan by applying thermal paste. but it behaved the same. Again I refitted the Heat Sink Fan, then it worked for 2 minutes and again shut down. Now it shuts down immediately after switching on. Mother board : M26GTM-3VP CPU : AMD athlon PSU : 450 watt Can anyone help?

  Read the article

• SSH Kerberos Auth in Mac OSX 10.7

  - by deemstone

  I just upgrade my Mac OS to 10.7 Lion. It has worked well before. But , Only kinit working normally now, can't ssh to my server. After reinstall the "Mac OS X Kerberos Extras" , nothing better. Anyone give me a help? Thanks a lot!! my command line : Myname$ ssh [email protected] -v ...... debug1: Authentications that can continue: gssapi-with-mic,password debug1: Next authentication method: gssapi-with-mic debug1: Miscellaneous failure (see text) UNKNOWN_SERVER while looking up 'host/[email protected]' (cached result, timeout in 1200 sec) debug1: An invalid name was supplied unknown mech-code 0 for mech 1 2 752 43 14 2 debug1: Miscellaneous failure (see text) unknown mech-code 0 for mech 1 3 6 1 5 5 14 debug1: Authentications that can continue: gssapi-with-mic,password debug1: An unsupported mechanism was requested unknown mech-code 0 for mech 1 3 5 1 5 2 7 debug1: Miscellaneous failure (see text) unknown mech-code 0 for mech 1 3 6 1 5 2 5 debug1: Next authentication method: password [email protected]'s password:

  Read the article

• What would be the total expenses of running an in-home web server?

  - by techaddict

  I have several hosting accounts with companies, and plan to keep them. However, I would like to try my hand at creating my own home web-server, both for fun and for the learning experience. I would like to know the expenses involved, including: electricity costs (greater than light bulb?) internet costs (will I have to upgrade my internet? Or is 3-5Mbps upload speed fine for a web server with medium amount of traffic? Would I have to get a separate internet connection?) other unknown expenses Consider that I will configure the web server myself, so that is not an expense. Also consider that I already have a computer (year-old Dell laptop, 15R) to use to be dedicated as the web server.

  Read the article

• Troubleshooting source of heavy resource-usage on a windows server 2008 running multiple sites

  - by batman_man

  Hi, I am running about 10 asp.net websites on a hosted virtual server. The server runs Server 2008 - each website is backed by its own database running on SQL server 2008 on the same box. Lately the box has seemed really slow. The only kind of discovery i could think of doing was looking in the task manager, where i can see w3wp and sqlserver.exe jumping to 40% cpu usage every 5-10 seconds. What are the steps i can take to determine which of my websites is taking these resources and or what database is getting hit the most? I have of course ssms installed on the machine as well. As you can tell, my sysadmin skills are very very limited - any help would be much appreciated.

  Read the article

• Apache Prefork Configuration

  - by user1618606

  I'm newbie on VPS configuration. So, I've installed apache, php and mysql and now I need to know how to configure Prefork to optimize Apache. The system configuration is: CPU Cores 2 x 2 Ghz @ 4 Ghz RAM Memory 2304 MB DDR3 Burst Memory 3 GB DDR3 Disk Space 30 GB SSD Bandwidth 3 TB SwitchPort 1 Gbps Actually, after linux, mysql, apache and php, there are 250 MB memory in use. Well, I don't have idea to calculate. I saw in some websistes, some vars like: KeepAlive On KeepAliveTimeout 1 MaxKeepAliveRequests 100 StartServers 15 MinSpareServers 15 MaxSpareServers 15 MaxClients 20 MaxRequestsPerChild 0 or StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 How I could to do: Prefork or worker? Where and how the vars are placed? In httpd.conf?

  Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >