Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 259/783 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

• Mac | Router not assigning the IP address.

  - by Vaibhav Bajpai

  I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

  Read the article

• Secondary fallback/failover network on Cisco ASA

  - by tyranitar

  In my network there is a Cisco ASA 55x0 with "inside" interface (network 192.168.79.0/24) and "outside" interface (network 89.x.x.48/29) There is this nat rule: object network NAToutside nat (inside,outside) dynamic interface and the static route route outside 0.0.0.0 0.0.0.0 89.x.x.49 1 and all ACL rules. Now I have another new outside network by another ISP called "outside2", this network is already natted and the Cisco ASA in in the network 192.168.70.0/24. I would use this network as a fallback one. So I set the nat rule: object network NAToutside2 nat (inside,outside2) dynamic interface and the static route with a different metric route outside2 0.0.0.0 0.0.0.0 192.168.70.1 2 Clearly it doesn't work: when I disconnect the outside ethernet cable no workstation can connect to the Internet throught the outside2 network... What do I need more?

  Read the article

• How to control routes added by RasDial

  - by Robert Dodier

  I am using the RasDial function on a Windows box (Windows Server 2008) to dial a device from which the server then reads data. It seems that some new routes are added to the network routing table when the dial-up connection is made. That interferes with other network interfaces on the server. In particular, RasDial adds a default route which routes traffic to the device, which makes the server unreachable until the connection is dropped. Is there a way to control which routes are added by RasDial? I have been studying Microsoft's document for RasDial and associated items (RASDIALPARAMS, RASDIALEXTENSIONS) without finding anything about routing. There is an option for "Use default gateway on remote network" when configuring a VPN, but I don't see how to apply that in this case. Thanks for any light you can shed on this problem.

  Read the article

• Why would one server be sending DUP ACK packets to one PC, which is responding with HTTP RST packets?

  - by IronicMuffin

  I'm not a network profressional, so please excuse any wrong language. I was debugging why my DNS traffic was a constant 160Kbps on our corporate network. I opened up a wireshark trace, and I see one PC of a coworker broadcasting HTTP [RST] packets to one of our DMZ servers at the rate of 1000 a second. He restarted his machine, and as soon as it went offline, the server started broadcasting [DUP] [ACK] packets, until he came back online. It then resumed the HTTP [RST] packets. Apparently this server has been doing this kind of behavior since it went live. I believe it did this with a printer and an access point as well. Can anyone explain why this behavior is occurring? Any solutions? The initial research was done because there have been "bandwidth issues" and I wonder if this is contributing.

  Read the article

• How can I capture a process's network traffic?

  - by Yassin

  I would like to capture the traffic generated by a specific process (using Wireshark or other packet sniffer). Does anyone know how to do it? Thanks!

  Read the article

• Is there a good tool for monitoring network activity on Mac OS X?

  - by xentek

  Is there a good bit of software on Mac OS X that I can use to monitor incoming and outgoing network activity? Nothing too geeky, I just want something simple to use. I'm on version 10.6 (Snow Leopard) if that helps.

  Read the article

• What if any free video player for windows can I set a custom frame buffer for streaming over the wifi?

  - by user268883

  I currently use DAUM PLayer (Pot Player) but I have problems streaming video to my laptop unless it is plugged into the network. An easy fix (so I thought) would be to find a player were I could adjust the cache / buffer so say 5 mins+ is read to the local Hdrive and then played from there... I can not work out how to do this in any player I have VLC, MPCHC and DAUM installed. All I want to do is increase the file buffer so X amount of the networkfile is copied to the local drive and then played... so all stuttering is stopped? How do I do this?

  Read the article

• Does connecting to the default host via public IP from within its subnet cause any issues?

  - by username

  I'm setting up a small office network with a single public IP (let's say it's 69.16.230.117). I've configured NAT on the router with incoming traffic forwarded to the server (say the server has a private IP of 192.168.0.2). Is it okay to configure the client machines on the same subnet to access the server via the router's public IP (69.16.230.117)? In practice it's never caused me problems, but I've heard, here and there, that it is a bad idea, and one should use the private IP (192.168.0.2). Does connecting to the default host via public IP from within its subnet cause any issues? Please refrain from writing "never! it breaks the intranet!" ;-)

  Read the article

• SMTP 25 blocked externally

  - by Jeff

  not sure how to title this question... we run an exchange server with around 80 internal users, all outgoing mail is relayed off a smart host (ISP smtp server) so nothing is actually sent to the world via our server. i wanted to check the server, locally i can telnet to port 25 with no issues and receive the esmtp service ready reply. whenever i do it from an external address (off our local network) i receive unable to connect error 10060. can this cause problems with SPF records, and reverse DNS ? should my exchange server be able to accept smtp requests, requiring authentication before i am able to send from external addresses? if so how... also the exchange server is behind a NAT (asa) device, more than likely thinking that the nat is not configured to route the smtp 25 request to the exchange server.. thanks

  Read the article

• Website ocasionally does not load on first click

  - by tfe

  Today I noticed that my website hosted on a virtual server ocasionally does not load on first click. I click on some link, browser starts loading page but nothing loads and does not not appear any error message (like "connection reset by peer etc). Nothing. When I click the same link again, page loads immediately. The same situation on 2 computers in different browsers. It happends not always, maybe on each 20... or 30 click. Sites from other servers load without this problem. Any ideas what can cause this problem?

  Read the article

• Dns.GetHostEntry is not giving me a good IP to pass to IPEndPoint function in my domain

  - by Beach Miles

  My c# code from my asynchronous socket client to get the address of my socket server. string testServerIP = "192.168.0.1"; IPHostEntry ipHostInfo = Dns.GetHostEntry(testServerIP); //time server address IPAddress ipAddress = ipHostInfo.AddressList[0]; IPEndPoint remoteEP = new IPEndPoint(ipAddress, port); I get the following error message from the above code. CheckServerReconnect:Cant connect to 192.168.0.1 The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for

  Read the article

• Can I use Server Monitor with a non-server Mac?

  - by Chris

  I have a computer I use as a simple file and web server. I am simply desiring to be able to monitor load, traffic, memory usage, etc via Server Monitor. I have also downloaded an app for my iPhone which does the same thing, but it uses the same protocol that Server Monitor does. Is it possible to get Server Monitor to recognize my non-server box as a server so I can monitor this information? For reference, I am running 10.4.ll on this PPC box. Thanks in advance!

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• VMWare Player disrupting Samba on Ubuntu 9.04 host?

  - by TonyUser

  I've had Ubuntu 9.04 running on this computer for a while now. I just installed VMWare Player on my system and now when I try to browse the network in the Ubuntu host all the computers will show up one time only. If I try to browse again, no computers appear and even the workgroup is missing. I have to run: sudo /etc/init.d/vmware stop sudo /etc/init.d/samba restart to get the network visable again. As long as VMWare Player is stopped Samba seems fine. I guess it's got to do with the virtual adaptors that VMWare installs. Is there a way to get them both to work, or did I just miss-configure something?

  Read the article

• Wired and Wireless Network Duplication

  - by Dave

  Howdy! Running into an issue when some of our client's have their laptop's connected via the wired ethernet network aswell as on the WLAN of the same network. There is know issues caused to the end clients.. BUT! Being a Managed Services Engineer i get pretty over the alerts that come through on our reports for machine's with the same hostname on the same network! We are not going to remove this monitoring because it does help a lot with detecting and stopping inferior users and things like that. So basically.. Question is, is there a way in Windows (third party programs welcome) to disable the wireless network when a wired network is connected and operational.. I know that Windows automticaly 'prefers' the wired network, however they are still both connected and therfore there is duplicate hostnames on the same network. Could also have stupid issues with DNS and things like that! Thanks!

  Read the article

• How does a frame retrieve the recipient's MAC address?

  - by Sarmen B.

  I am studying a Network+ book named All-in-one CompTia Network+ by Mike Meyers. In chapter 2 he talks about frames and how he represents them as canisters and the data within the frame contains the recipients mac address, senders mac address, data, and sequence number. What I don't understand is if the sender is sending a file via the network to the recipient, and this frame contains this data, how does the frame know what the recipients MAC address is before sending it? In regards to TCP/IP when it contains the recipients IP address, that's understandable how it retrieves that value. But I don't understand how it can retrieve the MAC address, because if that frame comes from the senders computer, goes into the router and copies itself to each and every computer that exists on the network, how did it have the MAC address to know where to go? Let me know if I'm not making sense.

  Read the article

• windows 7 virtual wireless adapter keeps going to sleep

  - by conners

  Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

  Read the article

• No internet through a web browser but Skype still works

  - by kim3er

  We get our office broadband through a BT Business Broadband WiFi router. We have a mixture of macs and windows PC/laptops connecting to it at any one time. All devices are able to connect to the wireless signal with pretty much full signal. However, only two computers (one windows, one os x) are able to consistently connect to the internet. The other three (one windows, two os x), while they can always connect to the wifi, exhibit one of three characteristics. No internet at all. Programs like Skype work, but no internet through a browser. Internet works, but with intermittent lag when switching between different sites. I'm assuming while trying to resolve different addresses. Ignoring point 1 for moment, my gut is telling me DNS. It is an up to 20MB line that usually gets to between 13MB and 15MB downstream. The router is capable of dealing with the amount of wireless devices that we're throwing at it. Has anyone got any suggestions for how I might further diagnose this problem (preferably in OS X)? Rich

  Read the article

• monitor internet bandwidth on LAN

  - by Dimal Chandrasiri

  I'm on a office network and there are around 12 PCs that are connected to a switch and then to a Prolink Router. Now the Internet connection is very slow and I'm the one who manage all the computers. I want to monitor bandwidth usage of each computer on the LAN. how can I achieve this using my computer. I cannot install any software on the client computers other than mine. I tried wireshark but, it only shows my network usage so there is no use with the data I get from it. Is there any specific software that I can use within my PC to get the bandwidth details of other computers. I'm on a windows 7 x64bit PC with admin privileges. Thank you.

  Read the article

• Port-Forwarding in Virtual Box

  - by davidzaz

  I have Virtual Box setup with the following commands: vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/HostPort" 50000 vboxmanage setextradata myVm `"VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/GuestPort" 50000 vboxmanage setextradata myVm "VBoxInternal/Devices/pcnet/0/LUN#0/Config/transfer/Protocol" TCP On the host machine, the following command times out: telnet localhost 50000 What am I doing wrong? The above command does work on the guest machine.

  Read the article

• Where is this error message coming from?

  - by jordanpg

  Recently switched to a new ISP after a move, running Chrome under OSX 10.7. I see the following error when visiting various sites -- no particular pattern -- from time to time. This is the entire message. It is the only thing that appears in my web browser. The problem fixes itself in a few minutes. Probably a lookup error of some sort, but I don't recognize it. What piece of software is serving this message? What is happening? What is this Reference # referencing? Invalid URL The requested URL "/articles/6517181", is invalid. Reference #9.6f200f6c.235618518a.b7e910cf

  Read the article

• How to prefer ipv6 over ipv4 only for specific websites?

  - by kria

  I only have ipv6 connectivity via a HE tunnel on my router, so normally I want to prefer ipv4 over ipv6. For some websites however, I would like to prefer ipv6. Right now I have just set DisabledComponents to 0x20 and hard coded the ipv6 resolution into my hosts file for the sites i want to access over ipv6. Since these ip addresses change at times, this is not a good solution. Any ideas on how to handle this in a non-clunky way? Some kind of Chrome/Firefox add-on might do the trick, but I couldn't find one for this purpose.

  Read the article

• How can I configure a txqueuelen value to persist on reboot?

  - by kdt

  Hi, In CentOS 4.x, I can set the txqueuelen parameter on a network interface with "ifconfig eth0 txqueuelen 1000". However, this is lost when the machine reboots -- which configuration file should I use to set the persistent value of this parameter?

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• cheap gigabit switch for small business

  - by neoice

  my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

  Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >