Search Results

Search found 8367 results on 335 pages for 'temporal difference'.

Page 259/335 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

  • How far should we take the N+N redundancy craziness ?

    - by Brann
    The industry standard when it comes from redundancy is quite high, to say the least. To illustrate my point, here is my current setup (I'm running a financial service). Each server has a RAID array in case something goes wrong on one hard drive .... and in case something goes wrong on the server, it's mirrored by another spare identical server ... and both server cannot go down at the same time, because I've got redundant power, and redundant network connectivity, etc ... and my hosting center itself has dual electricity connections to two different energy providers, and redundant network connectivity, and redundant toilets in case the two security guards (sorry, four) needs to use it at the same time ... and in case something goes wrong anyway (a nuclear nuke? can't think of anything else), I've got another identical hosting facility in another country with the exact same setup. Cost of reputational damage if down = very high Probability of a hardware failure with my setup : <<1% Probability of a hardware failure with a less paranoiac setup : <<1% ASWELL Probability of a software failure in our application code : 1% (if your software is never down because of bugs, then I suggest you doublecheck your reporting/monitoring system is not down. Even SQLServer - which is arguably developed and tested by clever people with a strong methodology - is sometimes down) In other words, I feel like I could host a cheap laptop in my mother's flat, and the human/software problems would still be my higher risk. Of course, there are other things to take into consideration such as : scalability data security the clients expectations that you meet the industry standard But still, hosting two servers in two different data centers (without extra spare servers, nor doubled network equipment apart from the one provided by my hosting facility) would provide me with the scalability and the physical security I need. I feel like we're reaching a point where redundancy is just a communcation tool. Honestly, what's the difference between a 99.999% uptime and a 99.9999% uptime when you know you'll be down 1% of the time because of software bugs ? How far do you push your redundancy crazyness ?

    Read the article

  • Internal Code Signing: Key Distribution, or Certificate Server?

    - by Myrddin Emrys
    I should first note that we have nobody in IT with significant familiarity with self-signed certification. We have a moderately sprawling network (one forest, many locations), and we are now rolling out internal code signing; until now users have run untrusted code, or we even disabled(!) the warnings. Intranet applications, scripts, and sites will now be signed with self certification. I am aware of two obvious ways we can deploy this: Distributing the keys directly via a group policy, and setting up a cert server. Can someone explain the trade-offs between these two methods? How many certs before the group policy method is unwieldy? Are they large enough that remote users will have issues? Does the group policy method distribute duplicates on every login? Is there a better method I am not aware of? I can find a lot of documentation on certifications and various ways to create them, but I have not been able to find something that summarizes the difference between the distribution methods and what criteria make one or the other superior.

    Read the article

  • 5.1 Surround Channels are Jumbled

    - by stickynips
    I had this exact setup working previously, but after a reformat it went screwy on me. I have an Onkyo A/V Receiver hooked up to my PC, via optical S/PDIF. Attached to the receiver is a 5.1 speaker setup (tested and working fine with my Xbox via the receiver). It seems to me that the audio channels are getting mixed up somehow between the PC and the receiver. I have a 5.1 test file which plays a sounds through each speaker individually. The channels are mixed as such: "Left Front" plays through my Right Front speaker "Center" plays through my Left Front speaker "Right Front" plays through my Center speaker "Left Rear" plays through my Subwoofer "Right Rear" plays through my Left Rear speaker I've tried downloading the latest Realtek HD Audio Drivers and the Realtek HD Audio Manager, but neither makes any difference. If there's a way I can manually rearrange the channels I believe it would fix the problem, but as far as I know this is impossible. edit: Sorry, I've forgotten some basic info. I'm running Windows 7 x64. The sound card is Realtek ALC892 embedded in a GIGABYTE GA-890GPA-UD3H AM3 motherboard.

    Read the article

  • Anonymous Login attemps from IPs all over Asia, how do I stop them from being able to do this?

    - by Ryan
    We had a successful hack attempt from Russia and one of our servers was used as a staging ground for further attacks, actually somehow they managed to get access to a Windows account called 'services'. I took that server offline as it was our SMTP server and no longer need it (3rd party system in place now). Now some of our other servers are having these ANONYMOUS LOGIN attempts in the Event Viewer that have IP addresses coming from China, Romania, Italy (I guess there's some Europe in there too)... I don't know what these people want but they just keep hitting the server. How can I prevent this? I don't want our servers compromised again, last time our host took our entire hardware node off of the network because it was attacking other systems, causing our services to go down which is really bad. How can I prevent these strange IP addresses from trying to access my servers? They are Windows Server 2003 R2 Enterprise 'containers' (virtual machines) running on a Parallels Virtuozzo HW node, if that makes a difference. I can configure each machine individually as if it were it's own server of course... UPDATE: New login attempts still happening, now these ones are tracing back to Ukraine... WTF.. here is the Event: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB4FEB30C) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: REANIMAT-328817 Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 94.179.189.117 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Here is one from France I found too: Event Type: Success Audit Event Source: Security Event Category: Logon/Logoff Event ID: 540 Date: 1/20/2011 Time: 11:09:50 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: QA Description: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB35D8539) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: COMPUTER Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 82.238.39.154 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • How to connect 2 routers (Asmax and D-link)

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • Issues Deploying Functional WAR to Elastic Beanstalk with Tomcat7

    - by BFar
    I am currently deploying OpenTripPlanner (http://github.com/OpenPlans/OpenTripPlanner.git) to Elastic Beanstalk. I'm able to successfully build and deploy opentripplanner with my own customized settings on an ec2. I have set it up so that the appropriate WAR file can be placed in the Tomcat/Webapps folder, and when Tomcat is started up, it will auto-deploy, and even download open trip planner's graph.obj from an S3. All of that works just fine, except when I try to deploy to Elastic Beanstalk. When I upload to Elastic Beanstalk, the log shows that my WAR file is successfully unpacked & successfully downloads the graph.obj from my S3. The only difference is that then nothing happens and I can't load the site in my browser. The health is RED, and I can't figure out what is going on. I've tried looking into ports and dns issues, but I can't determine what's wrong. Anyone have any ideas? Why would a WAR that works on tomcat7 outside of Beanstalk fail to be accessible?

    Read the article

  • UDP blocked by Windows XP Firewall when sending to local machine

    - by user36367
    Hi there, I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: - Windows XP Professional with Service Pack 3, all updated - Program that sends UDP datagrams - Program that receives UDP datagrams - Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas? Thanks in advance!

    Read the article

  • How to tell nginx to honor backend's cache?

    - by ChocoDeveloper
    I'm using php-fpm with nginx as http server (I don't know much about reverse proxies, I just installed it and didn't touch anything), without Apache nor Varnish. I need nginx to understand and honor the http headers I send. I tried with this config (taken from the docs) but didn't work: /etc/nginx/nginx.conf: fastcgi_cache_path /var/lib/nginx/cache levels=1:2 keys_zone=website:10m inactive=10m; fastcgi_cache_key "$scheme$request_method$host$request_uri"; /etc/nginx/sites-available/website: server { fastcgi_cache website; #fastcgi_cache_valid 200 302 1h; #fastcgi_cache_valid 301 1d; #fastcgi_cache_valid any 1m; #fastcgi_cache_min_uses 1; #fastcgi_cache_use_stale error timeout invalid_header http_503; add_header X-Cache $upstream_cache_status; } I always get "MISS" and the cache dir is empty. If I uncomment the other directives, I get hit, but I don't want those "dumb" settings, I need to control them within my backend. For example, if my backend says "public, s-maxage=10", the cache should be considered stale after 10 secs. Instead, nginx will store it for 1h, because of these directives. I was thinking whether I should try proxy_cache, not sure what's the difference. In both fastcgi and proxy modules docs it says this: The cache honors backend's Cache-Control, Expires, and etc. since version 0.7.48, Cache-Control: private and no-store only since 0.7.66, though. Vary handling is not implemented. nginx version: nginx/1.1.19 Any thoughts? pd: I also have the reverse proxy that is offered by Symfony2 (which I turn off to use nginx's). The headers are interpreted correctly by it, so I think I'm doing it right.

    Read the article

  • ubuntu preseed installation keep missing mirror files

    - by JackWu
    Install ubuntu12.04.2 with preseed file, but there is one buggy problem about preseed mirror setting. The symptom here is installing process got stuck. So I track down the log file, and find out the real problem, the installation is looking for a file that's not there. This is just one of them, another pops up if I faked this file. This all happened during preseed, so I believe preseed has something to do with this. I google ubuntu preseed mirror and find this post saying: # If you select ftp, the mirror/country string does not need to be set. #d-i mirror/protocol string ftp d-i mirror/country string manual d-i mirror/http/hostname string archive.ubuntu.com d-i mirror/http/directory string /ubuntu d-i mirror/http/proxy string # Alternatively: by default, the installer uses CC.archive.ubuntu.com where # CC is the ISO-3166-2 code for the selected country. You can preseed this # so that it does so without asking. #d-i mirror/http/mirror select CC.archive.ubuntu.com # Suite to install. #d-i mirror/suite string lucid # Suite to use for loading installer components (optional). #d-i mirror/udeb/suite string lucid # Components to use for loading installer components (optional). #d-i mirror/udeb/components multiselect main, restricted I wonder the difference between d-i mirror/http/hostname and d-i mirror/http/mirror, I mean they all specify a mirror, right? In my preseed file, this is no d-i mirror/http/mirror, and d-i mirror/http/hostname points to my own repo as you might notice in the previous image. Here is my question: Does preseed fetches file/resource from internet, if I use local repo? Why it's looking for file that's not even there? This has bothered for quite time, many thanks in advance to anyone who might give any help.

    Read the article

  • Why is REMOTE_ADDR only sometimes available as an Apache environment variable?

    - by Xiong Chiamiov
    To avoid having to parse X-Forwarded-For in Varnish, I'm trying to just set a header on the SSL terminator (currently Apache) that stores the direct client IP in a header. On our development machine, this works: RequestHeader set X-Foo %{REMOTE_ADDR}e However, in staging it doesn't. Specifically, the header is empty, as illustrated by both varnishlog: 13 TxHeader b X-Foo: (null) (On the development machine, this shows the IP address as expected.) Similarly, logging REMOTE_ADDR shows that it only appears to be populated on the dev machine: # Config LogFormat "%{X-Forwarded-For}i %{REMOTE_ADDR}e" combined CustomLog "/var/log/httpd/access_log" combined # Log file, staging <my ip> - # Log file, development <my ip> <my ip> Since the dev machine is, well, a dev machine, it is different in a number of ways; however, I can't track down which difference is causing this. The versions of Apache are the same (2.2.22), and I don't see anything relevant in any of the standard config files or /etc/sysconfig/httpd. And the rest of the system is reasonably similar, since they're built off the same CentOS 5 base image. I can't even tell from the Apache documentation whether REMOTE_ADDR is expected to exist or not as an environment variable, but it clearly works on one machine, whether by fluke or design, and the inconsistency is driving me mad.

    Read the article

  • Subversion error: Repository moved permanently to please relocate

    - by Bart S.
    I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. (it does now - see edit) My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this? -- Edit So I restarted apache (again) and tried it again and now it give me an error message, but it doesn't really help. Anyone have an idea what it means? [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] Could not fetch resource information. [403, #0] [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] (2)No such file or directory: The URI does not contain the name of a repository. [403, #190001] -- Edit 2 If I do svn info it doesn't give anything usefull: [root@eduro eduro.nl]# svn info http://svn.domain.com/repos/ Username: username Password for 'username': svn: Repository moved permanently to 'http://svn.domain.com/repos/'; please relocate I also tried doing a local checkout (svn checkout file:///var/www/svn/repos/reposname) and that works fine (also adding / commiting works fine). So it seems is has something to do with apache. Some other information: I'm running CentOs 5.3 Plesk 9.3 Subversion, version 1.6.9 (r901367) -- Edit 3 I tried moving the repositories, but it didn't make any difference. selinux is disabled so that isn't it either. -- Edit 4 Really? Nobody :(?

    Read the article

  • Two monitors with Mac Mini - one displays black despite receiving a signal

    - by alex
    My Mac Mini outputs to my two new monitors - Dell U2311Hs. The LED on the bezel displays blue when receiving a signal, or yellow otherwise. Both screens are displaying blue. It also seems my Mini can see both of them... However, one of them is black. It just displays black, but appears to be receiving a signal (when I turn the Mac off, it then displays No Signal). To make things weirder, on startup, the boot up (white with Apple logo) appears on the right monitor (the one that now displays black). Occasionally, it flickers up on the black screen for 1 second. I have tried Detect Displays. It appears to do nothing. I'm also running a dual monitor KVM. Video connections are DVI-D. How can I fix this situation? Thanks. Update This is the weirdest thing - I used the DVI-D cable that came with the KVM and it seems to have fixed it - I didn't both because it looks identical to any other DVI cable (in form an pin out). So, I will accept an answer if someone can tell me what may be the difference in these cables?

    Read the article

  • Why do I need a managed switch and which one should I buy?

    - by ascanio1
    I bought a 2nd router and I want both routers to have direct WAN access to the modem. One of the 2 routers directs VOIP traffic to a telephone line port. This VOIP service is provided by the cable carrier which also leases the modem & the router. The cable company technician told me that this VOIP line uses IPv6 addressing and therefore I must employ an IPv6 capable/compliant Giga Hub/Switch or my telephone line won't work anymore. Pls advise me (brand/model) an IPv6 compliant, 2 port, switch to purchase. Pls educate me: By reading this forum I thought that hubs broadcast traffic to all ports, regardless of which input/output is being used and so, theoretically, they have nothing to do with IP. Correct? Same story for unmanaged switches, where the only difference is that these latter devices route traffic only to those ports which are detected to be in use. Correct? I also understood that unmanaged switches route traffic simply by detecting hardware use and not by selecting specific IP traffic. Correct? Finally, there are managed switches which DO select traffic based on IP and, therefore, only these managed switches are involved with IPv6... Why would my cable company explicitly tell me, over and over, that I must use an IPv6 compliant switch? Why would they need a managed switch instead of an unmanaged one? Thanks in advance for helping me understand!

    Read the article

  • Trouble with Russian pc's on my wifi

    - by hogni89
    I have created a WiFi hotspot for the local community. The problem is, some Russian PC's (Windows XP, Windows Vista and Windows 7) can't get internet connection (We have a lot of bypassing russian fishing vessels / cargo ships). The pc's obtain a valid IP address, and some of them can even manage to send some few packages - But none of them are usable on the network. They all say "Limited internet access" or "???????????? ?????? ? ????????". The thing these PC's have in common is, that they all run a Russian installation of Windows. No one else has problems with the WiFi hotspot - Danish and English Windows, Linux and OS X all work like a charm. Can it be, that there is a difference between the danish / english windows installation, compared to the Russian installation? EDIT START They can't ping the router (One PC got one response - ONCE), they can't access any sites and Windows newer asks "Is this network public, home or work?". EDIT END PS: The hotspot is a airMAX rocket M from Ubiquiti Networks, Inc (www.ubnt.com)

    Read the article

  • Puzzling TCP performance over 3G / UMTS

    - by lemonsqueeze
    I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

    Read the article

  • Formula-based Excel page headers

    - by Jake Krohn
    I'm using the "Rows to repeat at top" function in Excel's "Page Setup" dialog to ensure that a multi-row header block appears on every printed page of my worksheet. However, I'd like to be able to change certain bits of the header based on the content of the current page. I would simply like to display the value of one cell in the first row that is printed on the page. If this is my header: Section: xx And the data looks like this (columns are Section and Name): 1 Foo 1 Bar 2 Baz I want the "xx" in the header to be "1". If, further down on the next page, the value in the Section column is "3", I want that printed in the header of the next page. I originally thought that using the "OFFSET" function might help, e.g. ="Section: "&OFFSET(A2, 1, 0) But it only shows the offset from the original placement of the header, thus only working on page 1. The end document is a PDF, so right now I'm able to go back in with the "TouchUp Text Tool" in Acrobat and add the numbers page by page. But it gets to be a tedious process with 70+ page reports. Anyone have any better ideas that don't require me mucking up the original Excel document with inserted headers every N lines? This is Excel 2008 for Mac, if it makes a difference.

    Read the article

  • Load balancing with puppet

    - by Gonçalo Queirós
    Hi there. Im trying to setup a loadbalancing system. My load balancer (nginx) has a conf file where i should list all IP's of the upstream servers. I could put the IP's on the conf manually, but this ways i would need to change the conf file every time i add/remove an upstream server. For now i came up with two different ideas, but i don't like much of neither: 1 - Have every upstream machine to use Exported Resources to create a file with it's IP..Then the load balancer server will have an "include conf_directory/*", and load all the files created by the upstrem servers. Since the load balancer is using nginx this can be done, but if i wan't latter on to configure something that doesn't have the "include" on the conf files, this solution will not work. 2 - If the config doesn't support the "include" command, then we could have again, every upstream server use the Exported Resources to create a filw with its IP, and latter on, the load balancer execute a command that would pick every file and generate the config Both versions addopt the same techinque, the difference is that version 2 is used when the server (that needs to have a conf generated) doesn't recognize a command like "include" inside its own conf. Now, my question is, is there any way to do this in a different form? I suspect that there is, since puppet is made to manage multiple servers, it seems a bit strange not have a easy way to configure load balancers.

    Read the article

  • WAMP Installation - Multiple PHP Version Issues

    - by Pete171
    I have installed WAMP because I am attempting to modify an an application which uses Zend Optimizer (I cannot use Z.O. with PHP5.3+, which is why I decided to install WAMP). I downloaded the latest version - Wamp Server 2.1 - which comes bundled with PHP5.3.5. I then downloaded a PHP version that would be compatible with Z.O. - 5.2.9. - and a compatible Apache version, 2.0.63. My problem: PHP scripts run fine, but anything with MySQL does not work. Running the testmysql.php script returns the fatal error: Fatal error: Call to undefined function mysql_connect() in C:\wamp\www\testmysql.php on line 2". I have looked in the PHP INI files inside both PHP versions, and I'm fairly sure the relevant information is there. At least, there are parts inside that mention MySQL! Perhaps somebody could clarify exactly what information should be present? Also, when visiting a page that called phpinfo(), I noticed that the 'Loaded Configuration File' was pointing to C:\wamp\bin\php\php5.3.5\php.ini, even though I have enabled the older PHP version. I've stopped and started Apache, too, and that hasn't made a difference. Is anybody able to offer any assistance? Anything at all would be great; I'm not very good at messing around with Apache/

    Read the article

  • Distributed storage and computing

    - by Tim van Elteren
    Dear Serverfault community, After researching a number of distributed file systems for deployment in a production environment with the main purpose of performing both batch and real-time distributed computing I've identified the following list as potential candidates, mainly on maturity, license and support: Ceph Lustre GlusterFS HDFS FhGFS MooseFS XtreemFS The key properties that our system should exhibit: an open source, liberally licensed, yet production ready, e.g. a mature, reliable, community and commercially supported solution; ability to run on commodity hardware, preferably be designed for it; provide high availability of the data with the most focus on reads; high scalability, so operation over multiple data centres, possibly on a global scale; removal of single points of failure with the use of replication and distribution of (meta-)data, e.g. provide fault-tolerance. The sensitivity points that were identified, and resulted in the following questions, are: transparency to the processing layer / application with respect to data locality, e.g. know where data is physically located on a server level, mainly for resource allocation and fast processing, high performance, how can this be accomplished? Do you from experience know what solutions provide this transparency and to what extent? posix compliance, or conformance, is mentioned on the wiki pages of most of the above listed solutions. The question here mainly is, how relevant is support for the posix standard? Hadoop for example isn't posix compliant by design, what are the pro's and con's? what about the difference between synchronous and asynchronous opeartion of a distributed file system. Though a synchronous distributed file system has the preference because of reliability it also imposes certain limitations with respect to scalability. What would be, from your expertise, the way to go on this? I'm looking forward to your replies. Thanks in advance! :) With kind regards, Tim van Elteren

    Read the article

  • What user information is exposed via a browser?

    - by ipso
    Is there a function or website that can collect and display ALL of the user information that can be obtained via a browser? Background: This of course does not account for the significant cross-reference abilities of large corporations to collate multiple sources and signals from users across various properties, but it's a first step. Ghostery is just a great idea; to show people all of the surreptitious scripts that run on any given website. But what information is available – what is the total set of values stored – that those scripts can collect from? If you login to a search engine and stay logged in but leave their tab, is that company still collecting your webpage viewing and activity from other tabs? Can past or future inputs to pages be captured – say comments on another website? What types of activities are stored as variables in the browser app that can be collected? This is surely a highly complex question, given to countless user scenarios – but my whole point is to be able to cut through all that – and just show the total set of data available at any given point in time. Then you can A/B test and see what is available with in a fresh session with one tab open vs. the same webpage but with 12 tabs open, and a full day of history to boot. (Latest Firefox & Chrome – on Win7, Win8 or Mint13 – although I'd like to think that won't make too much of a difference. Make assumptions. Simple is better.)

    Read the article

  • Windows VPN always disconnects after < 3 minutes, only from my network

    - by hemp
    First, this problem has existed for almost two years. Until serverfault was born, I pretty much gave up on solving it - but now, hope is reborn! I've set up a Windows 2003 server as a domain controller and VPN server at a remote office. I am able to connect to and work over the VPN from every windows client I've tried, including XP, Vista, and Windows 7 without issue, from at least five different networks (corporate and home, domain and non.) It works fine from all of them. However, whenever I connect from clients on my home network, the connection drops (silently) after 3 minutes or less. After a short while, it will eventually tell me the connection has dropped and attempt to redial/reconnect (if I've configured the client that way.) If I reconnect, the connection will re-establish and appear to work correctly, but again will silently drop, this time after a seemingly shorter time period. These are not intermittent drops. It happens every single time, in exactly the same way. The only variable is how long the connection survives. It doesn't matter what type of traffic I send. I can sit idle, send continuous pings, RDP, transfer files, all of that at once - it makes no difference. The result is always the same. Connected for a few minutes, then silent death. Since I doubt anyone has experienced this exact situation, what steps can I take to troubleshoot my evanescing VPN?

    Read the article

  • How to setup port forwarding from my Webserver (apache) to my Database server (mysql)

    - by karman888
    Hello again guys, and thank you for your help so far. Here is my problem: I have two remote dedicated servers, one webserver that runs apache, and one db server that runs mysql. The apache server is visible on the internet of course, but the second server is only visible to the apache server because they are connected with LAN. I need to connect to the remote mysql server through internet from my home-pc , but only apache server is visible to my home-pc. How can i setup port-forwarding from my apache server to the mysql server so i will be able to "see" the mysql server from my home-pc? This question is a follow-up from my first question Connect to remote mysql server from my application. Problem is that Mysql server is on LAN in which you answered me and helped me a lot by telling me to do "port-forwarding". I looked over the internet, and i cant find a good how-to to do port-forwarding. I'm an experienced programmer, but have little experience on hardware and networks. I can understand though what must be done, so i just need a litle help to sort things out :) I hope you can help me guys, Thank you in advance p.s. machine that Apache is running is on CentOS, mysql server also CentOS. p.s2 webserver runs WebHostManager i dont know if that makes any difference or it can be made easily through this, i just mention it :)

    Read the article

  • i7 Windows 7 laptop or Macbook Pro 15" (For making 3D model and Animation)

    - by sppdhs
    Hi everyone, I'm thinking of buying a new laptop as my current one will be 5 years old next year and it currently gives me a blue screen everytime I run a heavy software to make 3D models and animation. Question is: Should I buy Macbook Pro or a Windows 7 laptop? I tried to research and some say that Windows would be better, especially because you can buy a very high spec laptop with cheaper price. While some other say Macbook Pro is the better choice as it can run bootcamp with windows 7 100% performance on every software even though it's a mac. Is this true? Which one is actually better? Btw, the software that I usually use is 3Ds Max, Maya, and ZBrush. To note as well, I have never used a Mac before. I've checked around some stores and budget wise, I'll need around AU$3000+ to buy a Macbook pro, and AU$2000+ to buy a windows laptop. Quite a big difference in price range. Thanks in advance for your help.

    Read the article

  • Scenario - NTFS Symbolic Link or Junction?

    - by Unsigned
    Differences Absolute Relative File Directory UNC Symbolic link ? ? ? ? ? Junction ? x x ? x Scenario Let's assume we're creating a reparse point to create the redirect C:\SomeDir => D:\SomeDir Since this scenario only requires local, absolute paths, either a junction or symlink would work. In this situation, is there any advantage to using one or the other? Assume Windows 7 for the OS, disregarding backward-compatibility (prior to Vista, symlinks are not supported). Update I have found another difference. Symbolic Link - Link's permissions only affect delete/rename operations on the link itself, read/write access (to the target) is governed by the target's permissions Junction - Junction's permissions affect enumeration, revoking permissions on the junction will deny file listing through that junction, even if the target folder has more permissive ACLs The permissions make it interesting, as symlinks can allow legacy applications to access configuration files in UAC-restricted areas (such as %ProgramFiles%) without changing existing access permissions, by storing the files in a non-restricted location and creating symlinks in the restricted directory.

    Read the article

  • IBM BladeCenter S: Disk Configuration

    - by gravyface
    Have just the one storage bay right now (SAS 15K 600GB x 6) and have configured one storage pool in RAID 10 with 4 disks (and two global spares). For each blade, I've created a volume and mapped accordingly: Blade #1 400 GB Blade #2 200 GB Blade #3 100 GB Blade #4 100 GB When I boot up Blade 1 and enter into the UEFI Setup (F1) followed by the Adapters and UEFI Drivers LSI Logic Fusion MPT SAS Driver Utility, I see 4 disks: two are the on-board 73GB drives, the other two are 200GB each and assume I'm being presented with two logical disks from the volume I created and mapped to this blade. I was a bit surprised by this: I figured I would've been presented with one logical drive per volume, not two. I'm assuming I can just configure whatever RAID level I wish that supports two disks, but not really sure what the benefits/trade-offs here. Should I go with RAID 10 on top of RAID 10? RAID 0? Software RAID 0/1/10? Does it even matter? If this is "normal" to see two disks, then I'm going to likely just do some benchmarking and see if it makes a difference changing the RAID levels (my guess is no); if this is not normal, well, please let me know. :)

    Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >