Search Results

Search found 5122 results on 205 pages for 'max schmeling'.

Page 26/205 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• how to optimize apache on web-server

  - by Prakash

  how can I optimize the server with following configuration. It takes too much time to load a page. IBM X3200 M3 Server - 1 Intel Xeon Processor with 4 GB Ram Below is my current configuration for apache: Start Servers: 5 (Default) Minimum Spare Servers: 10 Maximum Spare Servers: 20 Server Limit: 500 Max Clients: 500 Max Requests Per Child: 10000 (Default) Keep-Alive: On Keep-Alive Timeout: 5 Max Keep-Alive Requests: 100 Timeout: 200

  Read the article

• Can't configure frame relay T1 on Cisco 1760

  - by sonar

  For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

  Read the article

• E-Business Suite Technology Sessions at OpenWorld 2012

  - by Max Arderius

  Oracle OpenWorld 2012 is almost here! We're looking forward to updating you on our products, strategy, and roadmaps. This year, the E-Business Suite Applications Technology Group (ATG) will participate in 25 speaker sessions, two Meet the Experts round-table discussions, five demoground booths and seven Special Interest Group meetings as guest speakers. We hope to see you at our sessions.  Please join us to hear the latest news and connect with senior ATG development staff. Here's a downloadable listing of all Applications Technology Group-related sessions with times and locations: FOCUS ON Oracle E-Business Suite - Applications Tools and Technology (PDF) General Sessions GEN8474 - Oracle E-Business Suite - Strategy, Update, and RoadmapCliff Godwin, SVP, Oracle Monday, Oct 1, 12:15 PM - 1:15 PM - Moscone West 2002/2004 In this session, hear Oracle E-Business Suite General Manager Cliff Godwin deliver an update on the Oracle E-Business Suite product line. This session covers the value delivered by the current release of Oracle E-Business Suite, the momentum, and how Oracle E-Business Suite applications integrate into Oracle’s overall applications strategy. You’ll come away with an understanding of the value Oracle E-Business Suite applications deliver now and will deliver in the future. GEN9173 - Optimize and Extend Oracle Applications - The Path to Oracle Fusion ApplicationsNadia Bendjedou, Oracle; Corre Curtice, Bhavish Madurai (CSC) Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 3002/3004 One of the main objectives of this session is to help organizations build their IT roadmap for the next five years and be aligned with the Oracle Applications strategy in general and the Oracle Fusion Applications strategy in particular. Come hear about some of the common sense, practical steps you can take to optimize the performance of your Oracle Applications today and prepare your path to Oracle Fusion Applications for when your organization is ready to embrace them. Each step you take in adopting Oracle Fusion technology gets you partway to Oracle Fusion Applications. Conference Sessions CON9024 - Oracle E-Business Suite Technology: Latest Features and Roadmap Lisa Parekh, Oracle Monday, Oct 1, 10:45 AM - 11:45 AM - Moscone West 2016 This Oracle development session provides a comprehensive overview of Oracle’s product strategy for Oracle E-Business Suite technology, the capabilities and associated business benefits of recent releases, and a review of capabilities on the product roadmap. This is the cornerstone session for the Oracle E-Business Suite technology stack. Come hear about the latest new usability enhancements of the user interface; systems administration and configuration management tools; security-related updates; and tools and options for extending, customizing, and integrating Oracle E-Business Suite with other applications. CON9021 - Oracle E-Business Suite Future Directions: Deployment and System AdministrationMax Arderius, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2016  What’s coming in the next major version of Oracle E-Business Suite 12? This Oracle Development session covers the latest technology stack, including the use of Oracle WebLogic Server (Oracle Fusion Middleware 11g) and Oracle Database 11g Release 2 (11.2). Topics include an architectural overview of the latest updates, installation and upgrade options, new configuration options, and new tools for hot cloning and automated “lights-out” cloning. Come learn how online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature) will reduce your database patching downtimes to however long it takes to bounce your database server. CON9017 - Desktop Integration in Oracle E-Business Suite 12.1 Padmaprabodh Ambale, Gustavo Jimenez, Oracle Monday, Oct 1, 4:45 PM - 5:45 PM - Moscone West 2016 This presentation covers the latest functional enhancements in Oracle Web Applications Desktop Integrator and Oracle Report Manager, enhanced Microsoft Office support, and greater support for building custom desktop integration solutions. The session also presents tips and tricks for upgrading from Oracle Applications Desktop Integrator to Oracle Web Applications Desktop Integrator and Oracle Report Manager. CON9023 - Oracle E-Business Suite Technology Certification Primer and Roadmap Steven Chan, Oracle Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 2016  Is your Oracle E-Business Suite technology stack up to date? Are you taking advantage of all the latest options and capabilities? This Oracle development session summarizes the latest certifications and roadmap for the Oracle E-Business Suite technology stack, including elements such as database releases and options, Java, Oracle Forms, Oracle Containers for J2EE, desktop operating systems, browsers, JRE releases, development and Web authoring tools, user authentication and management, business intelligence, Oracle Application Management Packs, security options, clouds, Oracle VM, and virtualization. The session also covers the most commonly asked questions about tech stack component support dates and upgrade implications. CON9028 - Minimizing Oracle E-Business Suite Maintenance DowntimesSantiago Bastidas, Elke Phelps, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2016 This Oracle development session features a survey of the best techniques sysadmins can use to minimize patching downtimes. It starts with an architectural-level review of Oracle E-Business Suite fundamentals and then moves to a practical view of the various tools and approaches for downtimes. Topics include patching shortcuts, merging patches, distributing worker processes across multiple servers, running ADPatch in noninteractive mode, staged APPL_TOPs, shared file systems, deferring systemwide database tasks, avoiding resource bottlenecks, and more. An added bonus: hear about the upcoming Oracle E-Business Suite 12 online patching capabilities based on the groundbreaking Oracle Database 11g Release 2 Edition-Based Redefinition feature. CON9116 - Extending the Use of Oracle E-Business Suite with the Oracle Endeca PlatformOsama Elkady, Muhannad Obeidat, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2018 The Oracle Endeca platform includes a leading unstructured data correlation and analytics engine, together with a best-in class catalog search and guided navigation solution, to improve the productivity of all types of users in your enterprise. This development session focuses on the details behind the Oracle Endeca platform’s integration into Oracle E-Business Suite. It demonstrates how easily you can extend the use of the Oracle Endeca platform into other areas of Oracle E-Business Suite and how you can bring in your own data and build new Oracle Endeca applications for Oracle E-Business Suite. CON9005 - Oracle E-Business Suite Integration Best PracticesVeshaal Singh, Oracle, Jeffrey Hand, Zebra Technologies Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2018 Oracle is investing across applications and technologies to make the application integration experience easier for customers. Today Oracle has certified Oracle E-Business Suite on Oracle Fusion Middleware 11g and provides a comprehensive set of integration technologies. Learn about Oracle’s integration offering across data- and process-centric integrations. These technologies can be used to address various application integration challenges and styles. In this session, you will get an understanding of how, when, and where you can leverage Oracle’s integration technologies to connect end-to-end business processes across your enterprise, including your Oracle Applications portfolio.  CON9026 - Latest Oracle E-Business Suite 12.1 User Interface and Usability EnhancementsPadmaprabodh Ambale, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2016 This Oracle development session details the latest UI enhancements to Oracle Application Framework in Oracle E-Business Suite 12.1. Developers will get a detailed look at new features to enhance usability, offer more capabilities for personalization and extensions, and support the development and use of dashboards and Web services. Topics include new rich UI capabilities such as new home page features, Navigator and Favorites pull-down menus, REST interface, embedded widgets for analytics content, Oracle Application Development Framework (Oracle ADF) task flows, third-party widgets, a look-ahead list of values, inline attachments, pop-ups, personalization and extensibility enhancements, business layer extensions, Oracle ADF integration, and mobile devices. CON8805 - Planning Your Oracle E-Business Suite Upgrade from 11i to Release 12.1 and BeyondAnne Carlson, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 3002/3004 Attend this session to hear the latest Oracle E-Business Suite 12.1 upgrade planning tips from Oracle’s support, consulting, development, and IT organizations. You’ll get specific cross-product advice on how to understand the factors that affect your project’s duration, decide on your project’s scope, develop a robust testing strategy, leverage Oracle Support resources, and more. In a nutshell, this session tells you things you need to know before embarking upon your Release 12.1 upgrade project. CON9053 - Advanced Management of Oracle E-Business Suite with Oracle Enterprise ManagerAngelo Rosado, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 2016 The task of managing and monitoring Oracle E-Business Suite environments can be very challenging. Oracle Enterprise Manager is the only product on the market that is designed to monitor and manage all the different technologies that constitute Oracle E-Business Suite applications, including end user, midtier, configuration, host, and database management—to name just a few. Customers that have implemented Oracle Enterprise Manager have experienced dramatic improvements in system visibility and diagnostic capability as well as administrator productivity. The purpose of this session is to highlight the key features and benefits of Oracle Enterprise Manager and Oracle Application Management Suite for Oracle E-Business Suite. CON8809 - Oracle E-Business Suite 12.1 Upgrade Best Practices: Technical InsightIsam Alyousfi, Udayan Parvate, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3011 This session is ideal for organizations thinking about upgrading to Oracle E-Business Suite 12.1. It covers the fundamentals of upgrading to Release 12.1, including the technology stack components and supported upgrade paths. Hear from Oracle Development about the set of best practices for patching in general and executing the Release 12.1 technical upgrade, with special considerations for minimizing your downtime. Also get to know about relatively recent upgrade resources. CON9032 - Upgrading Your Customizations of Oracle E-Business Suite 12.1Sara Woodhull, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2016 Have you personalized Oracle Forms or Oracle Application Framework screens in Oracle E-Business Suite? Have you used mod_plsql in Release 11i? Have you extended or customized your Release 11i environment with other tools? The technical options for upgrading these customizations as part of your Oracle E-Business Suite Release 12.1 upgrade can be bewildering. Come to this Oracle development session to learn about selecting the best upgrade approach for your existing customizations. The session will help you understand customization scenarios and use cases, tools, and technologies to ensure that your Oracle E-Business Suite Release 12.1 environment fits your users’ needs closely and that any future customizations will be easy to upgrade. CON9259 - Oracle E-Business Suite Internationalization and Multilingual FeaturesMaher Al-Nubani, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2018 Oracle E-Business Suite supports more countries, languages, and regions than ever. Come to this Oracle development session to get an overview of internationalization features and capabilities and see new Release 12 features such as calendar support for Hijra and Thai, new group separators, lightweight multilingual support (MLS) setup, new character sets such as AL32UTF, newly supported languages, Mac certifications, Oracle iSetup support for moving MLS setups, new file export options for Unicode, new MLS number spelling options, and more. CON7188 - Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA SuiteSrikant Subramaniam, Joe Huang, Veshaal Singh, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3001 Follow your mobile customers, employees, and partners with Oracle Fusion Middleware. See how native iPhone and iPad applications can easily be built for Oracle E-Business Suite with the new Oracle ADF Mobile and Oracle SOA Suite. Using Oracle ADF Mobile, developers can quickly develop native applications for Apple iOS and other mobile platforms. The Oracle SOA Suite/Oracle ADF Mobile combination can execute business transactions on Oracle E-Business Suite. This session includes a demo in which a mobile user approves a business transaction in Oracle E-Business Suite and a demo of the tools used to build a native on-device solution. These concepts for mobile applications also apply to other Oracle applications.CON9029 - Oracle E-Business Suite Directions: Slashing Downtimes with Online PatchingKevin Hudson, Oracle Wednesday, Oct 3, 11:45 AM - 12:45 PM - Moscone West 2016 Oracle E-Business Suite will soon include online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature), which will reduce your database patching downtimes to however long it takes to bounce your database server. This Oracle development session details how online patching works, with special attention to what’s happening at a database object level when database patches are applied to an Oracle E-Business Suite environment that’s still running. Come learn about the operational and system management implications for minimizing maintenance downtimes when applying database patches with this new technology and the related impact on customizations you might have built on top of Oracle E-Business Suite. CON8806 - Upgrading to Oracle E-Business Suite 12.1: Technical and Functional PanelAndrew Katz, Komori America Corporation; Sandra Vucinic, VLAD Group, Inc. ;Srini Chavali, Cummins Inc.; Amrita Mehrok, Nadia Bendjedou, Anne Carlson Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2018 In this panel discussion, Oracle experts, customers, and partners share their experiences in upgrading to the latest release of Oracle E-Business Suite, Release 12.1. The panelists cover aspects of a typical Release 12 upgrade, technical (upgrading the technical infrastructure) as well as functional (upgrading to the new financial infrastructure). Hear directly from the experts who either develop the product or support, implement, or upgrade it, and find out how to apply their lessons learned to your organization. CON9027 - Personalize and Extend Oracle E-Business Suite Applications with Rich MashupsGustavo Jimenez, Padmaprabodh Ambale, Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2016 This session covers the use of several Oracle Fusion Middleware technologies to personalize and extend your existing Oracle E-Business Suite applications. The Oracle Fusion Middleware technologies covered include Oracle Application Development Framework (Oracle ADF), Oracle WebCenter, Oracle Endeca applications, and Oracle Business Intelligence Enterprise Edition with Oracle E-Business Suite Oracle Application Framework applications. CON9036 - Advanced Oracle E-Business Suite Architectures: Maximum Availability, Security, and MoreElke Phelps, Oracle Wednesday, Oct 3, 3:30 PM - 4:30 PM - Moscone West 2016 This session includes architecture diagrams and configuration instructions for building a maximum availability architecture (MAA) that will help you design a disaster recovery solution that fits the needs of your business. Database and application high-availability features it describes include Oracle Data Guard, Oracle Real Application Clusters (Oracle RAC), Oracle Active Data Guard, load-balancing Web and forms services, parallel concurrent processing, and the use of Oracle Exalogic and Oracle Exadata to provide a highly available environment. The session also covers the latest updates to systems management tools, AutoConfig, cloud computing, virtualization, and Oracle WebLogic Server and provides sneak previews of upcoming functionality. CON9047 - Efficiently Scaling Oracle E-Business Suite on Oracle Exadata and Oracle ExalogicIsam Alyousfi, Nishit Rao, Oracle Wednesday, Oct 3, 5:00 PM - 6:00 PM - Moscone West 2016 Oracle Exadata and Oracle Exalogic are designed from the ground up with optimizations in software and hardware to deliver superfast performance for mission-critical applications such as Oracle E-Business Suite. Oracle E-Business Suite applications run three to eight times as fast on the Oracle Exadata/Oracle Exalogic platform in standard benchmark tests. Besides performance, customers benefit from simplified support, enhanced manageability, and the ability to consolidate multiple Oracle E-Business Suite instances. Attend this session to understand best practices for Oracle E-Business Suite deployment on Oracle Exalogic and Oracle Exadata through customer case studies. Learn how adopting the Exa* platform increases efficiency, simplifies scaling, and boosts performance for peak loads. CON8716 - Web Services and SOA Integration Options for Oracle E-Business SuiteRekha Ayothi, Veshaal Singh, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2016 This Oracle development session provides a deep dive into a subset of the Web services and SOA-related integration options available to Oracle E-Business Suite systems integrators. It offers a technical look at Oracle E-Business Suite Integrated SOA Gateway, Oracle SOA Suite, Oracle Application Adapters for Data Integration for Oracle E-Business Suite, and other Web services options for integrating Oracle E-Business Suite with other applications. Systems integrators and developers will get an overview of the latest integration capabilities and technologies available out of the box with Oracle E-Business Suite and possibly a sneak preview of upcoming functionality and features. CON9030 - Recommendations for Oracle E-Business Suite Performance TuningIsam Alyousfi, Samer Barakat, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2018 Need to squeeze more performance out of your existing servers? This packed Oracle development session summarizes practical tips and lessons learned from performance-tuning and benchmarking the world’s largest Oracle E-Business Suite environments. Apps sysadmins will learn concrete tips and techniques for identifying and resolving performance bottlenecks on all layers, with special attention to application- and database-tier servers. Learn about tuning Oracle Forms, Oracle Concurrent Manager, Apache, and Oracle Discoverer. Track down memory leaks and other issues at the Java and JVM layers. The session also covers Oracle E-Business Suite product-level tuning, including Oracle Workflow, Oracle Order Management, Oracle Payroll, and other modules. CON3429 - Using Oracle ADF with Oracle E-Business Suite: The Full Integration ViewSiva Puthurkattil, Lake County; Juan Camilo Ruiz, Sara Woodhull, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 3003 Oracle E-Business Suite delivers functionality for handling the core business of your organization. However, user requirements and new technologies are driving an emerging need to implement new types of user interfaces for these applications. This session provides an overview of how to use Oracle Application Development Framework (Oracle ADF) to deliver cutting-edge Web 2.0 and mobile rich user interfaces that front existing Oracle E-Business Suite processes, and it also explores all the existing types of integration between the two worlds. CON9020 - Integrating Oracle E-Business Suite with Oracle Identity Management SolutionsSunil Ghosh, Elke Phelps, Oracle Thursday, Oct 4, 12:45 PM - 1:45 PM - Moscone West 2016 Need to integrate Oracle E-Business Suite with Microsoft Windows Kerberos, Active Directory, CA Netegrity SiteMinder, or other third-party authentication systems? Want to understand your options when Oracle Premier Support for Oracle Single Sign-On ends in December 2011? This Oracle Development session covers the latest certified integrations with Oracle Access Manager 11g and Oracle Internet Directory 11g, which can be used individually or as bridges for integrating with third-party authentication solutions. The session presents an architectural overview of how Oracle Access Manager, its WebGate and AccessGate components, and Oracle Internet Directory work together, with implications for Oracle Discoverer, Oracle Portal, and other Oracle Fusion identity management products. CON9019 - Troubleshooting, Diagnosing, and Optimizing Oracle E-Business Suite TechnologyGustavo Jimenez, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2016 This session covers how you can proactively diagnose Oracle E-Business Suite applications, including extensions built with Oracle Fusion Middleware technologies such as Oracle Application Development Framework (Oracle ADF) and Oracle WebCenter to catch potential issues in the middle tier before they become more serious. Topics include debugging, logging infrastructure, warning signs, performance tuning, information required when logging service requests, general JVM optimization, and an overall picture of all the moving parts that make it possible for Oracle E-Business Suite to isolate and fix problems. Also learn how Oracle Diagnostics Framework will help prevent downtime caused by failures. CON9031 - The Top 10 Things You Can Do to Secure Your Oracle E-Business Suite InstanceEric Bing, Erik Graversen, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2018 Learn the top 10 things you can do to secure your applications and your sensitive data. This Oracle development session for system administrators and security professionals explores some of the most important and overlooked things you can do to secure your Oracle E-Business Suite instance. It also covers data masking and other mechanisms for protecting sensitive data. Special Interest Groups (SIG) Some of our most senior staff have been invited to participate on the following SIG meetings as guest speakers: SIG10525 - OAUG - Archive & Purge SIGBrian Bent - Pre-Sales Engineer, TierData, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3011 The Archive and Purge SIG is an organization in which users can share their experiences and solicit functional and technical advice on archiving and purging data in Oracle E-Business Suite. This session provides an opportunity for users to network and share best practices, tips, and tricks. Guest: Oracle E-Business Suite Database Performance, Archive & Purging - Q&A SessionIsam Alyousfi, Senior Director, Applications Performance, Oracle SIG10547 - OAUG - Oracle E-Business (EBS) Applications Technology SIGSrini Chavali - IT Director, Cummins Inc Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3018 The general purpose of the EBS Applications Technology SIG is to inform and educate its members about current and future components of the tech stack as they relate to Oracle E-Business Suite. Attend this meeting for networking and education and to share best practices. Guest: Oracle E-Business Suite Technology Certification Roadmap - Presentation and Q&ASteven Chan, Sr. Director, Applications Technology Group, Oracle SIG10559 - OAUG - User Management SIGSusan Behn - VP of Oracle Delivery, Infosemantics, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3024 The E-Business Suite User Management SIG focuses on the components of user management that enable Oracle E-Business Suite users to define administrative functions and manage users’ access to functions and data based on roles within an organization—rather than the user’s individual identity—which is referred to as role-based access control (RBAC). This meeting includes an introduction to Oracle User Management that covers the Oracle User Management building blocks and presents an example of creating a security policy.Guest: Security and User Management - Q&A SessionEric Bing, Sr. Director, EBS Security, OracleSara Woodhull, Principal Product Manager, Applications Technology Group, Oracle SIG10515 - OAUG – Upgrade SIGBarbara Matthews - Consultant, On Call DBASandra Vucinic, VLAD Group, Inc. Sunday, Sep 30, 12:00 PM - 2:00 PM - Moscone West 3009 This Upgrade SIG session starts with a business meeting and then features a Q&A panel discussion on Oracle E-Business Suite upgrade topics. The session• Reviews Upgrade SIG goals and objectives• Provides answers, during the Q&A session, to questions related to Oracle E-Business Suite upgrades• Shares “real world” experiences, tips, and techniques for Oracle E-Business Suite upgrades to Release 12.1. Guest: Oracle E-Business Suite Upgrade - Q&A SessionAnne Carlson - Sr. Director, Oracle E-Business Suite Product Strategy, OracleUdayan Parvate - Director, EBS Release Engineering, OracleSuzana Ferrari, Sr. Principal Consultant, OracleIsam Alyousfi, Sr. Director, Applications Performance, Oracle SIG10552 - OAUG - Oracle E-Business Suite SIGDonna Rosentrater - Manager, Global Sourcing & Procurement Systems, TJX Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3020 The E-Business Suite SIG, affiliated with OAUG, supports Oracle E-Business Suite users through networking, education, and sharing of best practices. This SIG meeting will feature a general discussion of Oracle E-Business Suite product strategies in Release 12 and migration to Oracle Fusion Applications. Guest: Oracle E-Business Suite - Q&A SessionJeanne Lowell, Vice President, EBS Product Strategy, OracleNadia Bendjedou, Sr. Director, Product Strategy, Oracle SIG10556 - OAUG - SysAdmin SIGRandy Giefer - Sr Systems and Security Architect, Solution Beacon, LLC Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3022 The SysAdmin SIG provides a forum in which OAUG members and participants can share updates, tips, and successful practices relating to system administration in an Oracle applications environment. The SysAdmin SIG strives to enable system administrators to become more effective and efficient in their jobs by providing them with access to people and information that can increase their system administration knowledge and experience. Attend this meeting to network, share best practices, and benefit from educational content. Guest: Oracle E-Business Suite 12.2 Online Patching- Presentation and Q&AKevin Hudson, Sr. Director, Applications Technology Group, Oracle SIG10553 - OAUG - Database SIGMichael Brown - Senior DBA, COLIBRI LTD LC Sunday, Sep 30, 2:00 PM - 3:15 PM - Moscone West 3020 The OAUG Database SIG provides an opportunity for applications database administrators to learn from and share their experiences with supporting the various Oracle applications environments. This session will include a brief business meeting followed by a short presentation. It will end with an open discussion among the attendees about items of interest to those present. Guest: Oracle E-Business Suite Database Performance - Presentation and Q&AIsam Alyousfi, Sr. Director, Applications Performance, Oracle Meet the Experts We're planning two round-table discussions where you can review your questions with senior E-Business Suite ATG staff: MTE9648 - Meet the Experts for Oracle E-Business Suite: Planning Your Upgrade Jeanne Lowell - VP, EBS Product Strategy, Oracle John Abraham - Sr. Principal Product Manager, Oracle Nadia Bendjedou - Sr. Director - Product Strategy, Oracle Anne Carlson - Sr. Director, Applications Technology Group, Oracle Udayan Parvate - Director, EBS Release Engineering, Oracle Isam Alyousfi, Sr. Director, Applications Performance, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite upgrade best practices. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. MTE9649 - Meet the Oracle E-Business Suite Tools and Technology Experts Lisa Parekh - Vice President, Technology Integration, Oracle Steven Chan - Sr. Director, Oracle Elke Phelps - Sr. Principal Product Manager, Applications Technology Group, Oracle Max Arderius - Manager, Applications Technology Group, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite technology. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. Demos We have five booths in the exhibition demogrounds this year, where you can try ATG technologies firsthand and get your questions answered. Please stop by and meet our staff at the following locations: Advanced Architecture and Technology Stack for Oracle E-Business Suite (W-067) New User Productivity Capabilities in Oracle E-Business Suite (W-065) End-to-End Management of Oracle E-Business Suite (W-063) Oracle E-Business Suite 12.1 Technical Upgrade Best Practices (W-066) SOA-Based Integration for Oracle E-Business Suite (W-064)

  Read the article

• SQL Server and Hyper-V Dynamic Memory Part 2

  - by SQLOS Team

  Part 1 of this series was an introduction and overview of Hyper-V Dynamic Memory. This part looks at SQL Server memory management and how the SQL engine responds to changing OS memory conditions.   Part 2: SQL Server Memory Management As with any Windows process, sqlserver.exe has a virtual address space (VAS) of 4GB on 32-bit and 8TB in 64-bit editions. Pages in its VAS are mapped to pages in physical memory when the memory is committed and referenced for the first time. The collection of VAS pages that have been recently referenced is known as the Working Set. How and when SQL Server allocates virtual memory and grows its working set depends on the memory model it uses. SQL Server supports three basic memory models:   1. Conventional Memory Model   The Conventional model is the default SQL Server memory model and has the following properties: - Dynamic - can grow or shrink its working set in response to load and external (operating system) memory conditions. - OS uses 4K pages – (not to be confused with SQL Server “pages” which are 8K regions of committed memory).- Pageable - Can be paged out to disk by the operating system.   2. Locked Page Model The locked page memory model is set when SQL Server is started with "Lock Pages in Memory" privilege*. It has the following characteristics: - Dynamic - can grow or shrink its working set in the same way as the Conventional model.- OS uses 4K pages - Non-Pageable – When memory is committed it is locked in memory, meaning that it will remain backed by physical memory and will not be paged out by the operating system. A common misconception is to interpret "locked" as non-dynamic. A SQL Server instance using the locked page memory model will grow and shrink (allocate memory and release memory) in response to changing workload and OS memory conditions in the same way as it does with the conventional model.   This is an important consideration when we look at Hyper-V Dynamic Memory – “locked” memory works perfectly well with “dynamic” memory.   * Note in “Denali” (Standard Edition and above), and in SQL 2008 R2 64-bit (Enterprise and above editions) the Lock Pages in Memory privilege is all that is required to set this model. In 2008 R2 64-Bit standard edition it also requires trace flag 845 to be set, in 2008 R2 32-bit editions it requires sp_configure 'awe enabled' 1.   3. Large Page Model The Large page model is set using trace flag 834 and potentially offers a small performance boost for systems that are configured with large pages. It is characterized by: - Static - memory is allocated at startup and does not change. - OS uses large (>2MB) pages - Non-Pageable The large page model is supported with Hyper-V Dynamic Memory (and Hyper-V also supports large pages), but you get no benefit from using Dynamic Memory with this model since SQL Server memory does not grow or shrink. The rest of this article will focus on the locked and conventional SQL Server memory models.   When does SQL Server grow? For “dynamic” configurations (Conventional and Locked memory models), the sqlservr.exe process grows – allocates and commits memory from the OS – in response to a workload. As much memory is allocated as is required to optimally run the query and buffer data for future queries, subject to limitations imposed by:   - SQL Server max server memory setting. If this configuration option is set, the buffer pool is not allowed to grow to more than this value. In SQL Server 2008 this value represents single page allocations, and in “Denali” it represents any size page allocations and also managed CLR procedure allocations.   - Memory signals from OS. The operating system sets a signal on memory resource notification objects to indicate whether it has memory available or whether it is low on available memory. If there is only 32MB free for every 4GB of memory a low memory signal is set, which continues until 64MB/4GB is free. If there is 96MB/4GB free the operating system sets a high memory signal. SQL Server only allocates memory when the high memory signal is set.   To summarize, for SQL Server to grow you need three conditions: a workload, max server memory setting higher than the current allocation, high memory signals from the OS.    When does SQL Server shrink caches? SQL Server as a rule does not like to return memory to the OS, but it will shrink its caches in response to memory pressure. Memory pressure can be divided into “internal” and “external”.   - External memory pressure occurs when the operating system is running low on memory and low memory signals are set. The SQL Server Resource Monitor checks for low memory signals approximately every 5 seconds and it will attempt to free memory until the signals stop.   To free memory SQL Server does the following: ·         Frees unused memory. ·         Notifies Memory Manager Clients to release memory o   Caches – Free unreferenced cache objects. o   Buffer pool - Based on oldest access times.   The freed memory is released back to the operating system. This process continues until the low memory resource notifications stop.    - Internal memory pressure occurs when the size of different caches and allocations increase but the SQL Server process needs to keep its total memory within a target value. For example if max server memory is set and certain caches are growing large, it will cause SQL to free memory for re-use internally, but not to release memory back to the OS. If you lower the value of max server memory you will generate internal memory pressure that will cause SQL to release memory back to the OS.    Memory pressure handling has not changed much since SQL 2005 and it was described in detail in a blog post by Slava Oks.   Note that SQL Server Express is an exception to the above behavior. Unlike other editions it does not assume it is the most important process running on the system but tries to be more “desktop” friendly. It will empty its working set after a period of inactivity.   How does SQL Server respond to changing OS memory?    In SQL Server 2005 support for Hot-Add memory was introduced. This feature, available in Enterprise and above editions, allows the server to make use of any extra physical memory that was added after SQL Server started. Being able to add physical memory when the system is running is limited to specialized hardware, but with the Hyper-V Dynamic Memory feature, when new memory is allocated to a guest virtual machine, it looks like hot-add physical memory to the guest. What this means is that thanks to the hot-add memory feature, SQL Server 2005 and higher can dynamically grow if more “physical” memory is granted to a guest VM by Hyper-V dynamic memory.   SQL Server checks OS memory every second and dynamically adjusts its “target” (based on available OS memory and max server memory) accordingly.   In “Denali” Standard Edition will also have sqlserver.exe support for hot-add memory when running virtualized (i.e. detecting and acting on Hyper-V Dynamic Memory allocations).   How does a SQL Server workload in a guest VM impact Hyper-V dynamic memory scheduling?   When a SQL workload causes the sqlserver.exe process to grow its working set, the Hyper-V memory scheduler will detect memory pressure in the guest VM and add memory to it. SQL Server will then detect the extra memory and grow according to workload demand. In our tests we have seen this feedback process cause a guest VM to grow quickly in response to SQL workload - we are still working on characterizing this ramp-up.    How does SQL Server respond when Hyper-V removes memory from a guest VM through ballooning?   If pressure from other VM's cause Hyper-V Dynamic Memory to take memory away from a VM through ballooning (allocating memory with a virtual device driver and returning it to the host OS), Windows Memory Manager will page out unlocked portions of memory and signal low resource notification events. When SQL Server detects these events it will shrink memory until the low memory notifications stop (see cache shrinking description above).    This raises another question. Can we make SQL Server release memory more readily and hence behave more "dynamically" without compromising performance? In certain circumstances where the application workload is predictable it may be possible to have a job which varies "max server memory" according to need, lowering it when the engine is inactive and raising it before a period of activity. This would have limited applicaability but it is something we're looking into.   What Memory Management changes are there in SQL Server “Denali”?   In SQL Server “Denali” (aka SQL11) the Memory Manager has been re-written to be more efficient. The main changes are summarized in this post. An important change with respect to Hyper-V Dynamic Memory support is that now the max server memory setting includes any size page allocations and managed CLR procedure allocations it now represents a closer approximation to total sqlserver.exe memory usage. This makes it easier to calculate a value for max server memory, which becomes important when configuring virtual machines to work well with Hyper-V Dynamic Memory Startup and Maximum RAM settings.   Another important change is no more AWE or hot-add support for 32-bit edition. This means if you're running a 32-bit edition of Denali you're limited to a 4GB address space and will not be able to take advantage of dynamically added OS memory that wasn't present when SQL Server started (though Hyper-V Dynamic Memory is still a supported configuration).   In part 3 we’ll develop some best practices for configuring and using SQL Server with Dynamic Memory. Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Why does Ubuntu reset brightness settings at the loading screen?

  - by leugim

  Since I first installed Ubuntu 11.10, I noticed that volume and screen brightness get reset every time Ubuntu starts. Why is this so? And what ways are there to keep brightness and volume levels after rebooting? I have found some scripts that change the screen-brightness at login. But this is not a good solution since login is slower because it seems to wait until the screen brightness is at the level specified by the script. After entering the password I see the screen brightness go down gradually. Only after this is complete (~1 or 2 seconds) does the background disappear and Unity come up. The screenbrightness is not remembered but instead redefined at login. So it gets remembered for the first part of the boot, then set to MAX and then again re-set to normal value by the script. My boot process is as follows: desired brightness: 2 (13,33%) / Max brightness: 15 (100%) Bios / brightness: OK GRUB (violet background color, white text) / brightness: OK Ubuntu loading screen with the dots / brightness: MAX (win7 loads with OK-brightness) User Login / brightness: MAX Unity starts / brightness: OK It seems to be more like a temporary patch than a actual solution. I'm looking for solutions that set the desired brightness permanently and consistently throughout the whole boot-process After updating to 12.04 the behavior is the same. I tried setpci -s 02:00.0 F4.B=XX The value of F4.B is always '0' regardless of what value I try to set it to (tried 0, ff, f, 5, etc) The solution in this answer does not have any noticeable effect: Desktop doesn't remember brightness settings after a reboot The variables at /sys/class/backlight/acpi_video0/ get changed if I use Fn+UP and Fn+DOWN Any help is appreciated. Thanks!

  Read the article

• Handling extremely large numbers in a language which can't?

  - by Mallow

  I'm trying to think about how I would go about doing calculations on extremely large numbers (to infinitum - intergers no floats) if the language construct is incapable of handling numbers larger than a certain value. I am sure I am not the first nor the last to ask this question but the search terms I am using aren't giving me an algorithm to handle those situations. Rather most suggestions offer a language change or variable change, or talk about things that seem irrelevant to my search. So I need a little guideance. I would sketch out an algorithm like this: Determine the max length of the integer variable for the language. If a number is more than half the length of the max length of the variable split it in an array. (give a little play room) Array order [0] = the numbers most to the right [n-max] = numbers most to the left Ex. Num: 29392023 Array[0]:23, Array[1]: 20, array[2]: 39, array[3]:29 Since I established half the length of the variable as the mark off point I can then calculate the ones, tenths, hundredths, etc. Place via the halfway mark so that if a variable max length was 10 digits from 0 to 9999999999 then I know that by halfing that to five digits give me some play room. So if I add or multiply I can have a variable checker function that see that the sixth digit (from the right) of array[0] is the same place as the first digit (from the right) of array[1]. Dividing and subtracting have their own issues which I haven't thought about yet. I would like to know about the best implementations of supporting larger numbers than the program can.

  Read the article

• web browsing vs. torrent traffic, and bandwidth priority?

  - by suli8

  recently i did download big torrent files. (120 Gb). and i need to seed them back to at least 1.5 ratio. my upload speed is 130 Kb/s max. the problem is that i need to seed them as fast as possible. but i browse the web a lot. and browsing with no upload left, can be very frustrating. I'm looking for something like this, torrent are on max. seeding rate, but when the browser needs the bandwidth, it gets it. priority is to web browser, but when not needed, torrent can be at max. i'm aware that i can change torrent client max speed. but doing it manually everytime and every 5 minutes or so, is hard. Info: i'm using firefox/chrome my torrent client is Ktorrent i'm on 11.10 with unity i do have a router, it's a HAG. and i can't access all it's properties. is this possible even? changing the priority in the system monitor for the applications can do the job?the nice value i mean. is there a way to set priority bandwidth usage for different apps? thank you!

  Read the article

• Proper caching method with .htaccess

  - by mark075

  There are a lot of snippets that enable caching on a website and I don't know which one should I use. The most popular is something like this: <IfModule mod_expires.c> ExpiresActive On ExpiresByType image/jpg "access 1 year" ExpiresByType image/png "access 1 year" ExpiresByType text/css "access 1 month" ExpiresDefault "access 2 days" </IfModule> I also found something similar, but with keyword 'plus'. Like this: ExpiresByType image/png "access plus 2592000 seconds" What does it mean, because I didn't find anything in the documentation. Another snippet I found: <ifModule mod_headers.c> <filesMatch "\.(ico|jpe?g|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\.(css)$"> Header set Cache-Control "max-age=604800, public" </filesMatch> <filesMatch "\.(js)$"> Header set Cache-Control "max-age=216000, private" </filesMatch> <filesMatch "\.(x?html?|php)$"> Header set Cache-Control "max-age=600, private, must-revalidate" </filesMatch> </ifModule> What is the best practice?

  Read the article

• NetLogo 4.1 - implementation of a motorway ( Problem creating collision of cars )

  - by user206019

  Hi there, I am trying to create a simulation of motorway and the behaviour of the drivers in NetLogo. I have some questions that I m struggling to solve. Here is my code: globals [ selected-car ;; the currently selected car average-speed ;; average speed of all the cars look-ahead ] turtles-own [ speed ;; the current speed of the car speed-limit ;; the maximum speed of the car (different for all cars) lane ;; the current lane of the car target-lane ;; the desired lane of the car change? ;; true if the car wants to change lanes patience ;; the driver's current patience max-patience ;; the driver's maximum patience ] to setup ca import-drawing "my_road3.png" set-default-shape turtles "car" crt number_of_cars [ setup-cars ] end to setup-cars set color blue set size .9 set lane (random 3) set target-lane (lane + 1) setxy round random-xcor (lane + 1) set heading 90 set speed 0.1 + random 9.9 set speed-limit (((random 11) / 10) + 1) set change? false set max-patience ((random 50) + 10) set patience (max-patience - (random 10)) ;; make sure no two cars are on the same patch loop [ ifelse any? other turtles-here [ fd 1 ] [ stop ] ;if count turtles-here > 1 ; fd 0.1 ;if ; ;ifelse (any? turtles-on neighbors) or (count turtles-here > 1) ;[ ; ifelse (count turtles-here = 1) ; [ if any? turtles-on neighbors ; [ ; if distance min-one-of turtles-on neighbors [distance myself] > 0.9 ; [stop] ; ] ; ] ; [ fd 0.1 ] ;] ;[ stop ] ] end to go drive end to drive ;; first determine average speed of the cars set average-speed ((sum [speed] of turtles) / number_of_cars) ;set-current-plot "Car Speeds" ;set-current-plot-pen "average" ;plot average-speed ;set-current-plot-pen "max" ;plot (max [speed] of turtles) ;set-current-plot-pen "min" ;plot (abs (min [speed] of turtles) ) ;set-current-plot-pen "selected-car" ;plot ([speed] of selected-car) ask turtles [ ifelse (any? turtles-at 1 0) [ set speed ([speed] of (one-of (turtles-at 1 0))) decelerate ] [ ifelse (look-ahead = 2) [ ifelse (any? turtles-at 2 0) [ set speed ([speed] of (one-of turtles-at 2 0)) decelerate ] [ accelerate if count turtles-at 0 1 = 0 and ycor < 2.5 [lt 90 fd 1 rt 90] ] ] [accelerate if count turtles-at 0 1 = 0 and ycor < 2.5 [lt 90 fd 1 rt 90] ] ] if (speed < 0.01) [ set speed 0.01 ] if (speed > speed-limit) [ set speed speed-limit ] ifelse (change? = false) [ signal ] [ change-lanes ] ;; Control for making sure no one crashes. ifelse (any? turtles-at 1 0) and (xcor != min-pxcor - .5) [ set speed [speed] of (one-of turtles-at 1 0) ] [ ifelse ((any? turtles-at 2 0) and (speed > 1.0)) [ set speed ([speed] of (one-of turtles-at 2 0)) fd 1 ] [jump speed] ] ] tick end ;; increase speed of cars to accelerate ;; turtle procedure set speed (speed + (speed-up / 1000)) end ;; reduce speed of cars to decelerate ;; turtle procedure set speed (speed - (slow-down / 1000)) end to signal ifelse (any? turtles-at 1 0) [ if ([speed] of (one-of (turtles-at 1 0))) < (speed) [ set change? true ] ] [ set change? false ] end ;; undergoes search algorithms to change-lanes ;; turtle procedure show ycor ifelse (patience <= 0) [ ifelse (max-patience <= 1) [ set max-patience (random 10) + 1 ] [ set max-patience (max-patience - (random 5)) ] set patience max-patience ifelse (target-lane = 0) [ set target-lane 1 set lane 0 ] [ set target-lane 0 set lane 1 ] ] [ set patience (patience - 1) ] ifelse (target-lane = lane) [ ifelse (target-lane = 0) [ set target-lane 1 set change? false ] [ set target-lane 0 set change? false ] ] [ ifelse (target-lane = 1) [ ifelse (pycor = 2) [ set lane 1 set change? false ] [ ifelse (not any? turtles-at 0 1) [ set ycor (ycor + 1) ] [ ifelse (not any? turtles-at 1 0) [ set xcor (xcor + 1) ] [ decelerate if (speed <= 0) [ set speed 0.1 ] ] ] ] ] [ ifelse (pycor = -2) [ set lane 0 set change? false ] [ ifelse (not any? turtles-at 0 -1) [ set ycor (ycor - 1) ] [ ifelse (not any? turtles-at 1 0) [ set xcor (xcor + 1) ] [ decelerate if (speed <= 0) [ set speed 0.1 ] ] ] ] ] ] end I know its a bit messy because I am using code from other models from the library. I want to know how to create the collision of the cars. I can't think of any idea. As you notice my agent has almost the same size as the patch (I set it to 0.9 so that you can distinguish the space between 2 cars when they are set next to each other and I round the coordinates so that they are set to the centre of the patch). In my accelerate procedure I set my agent to turn left, move 1, turn right in a loop. I want to know if there's a command that lets me make the agent jump from one lane to the other (to the patch next to it on its left) without making it turn and move. And last, if you notice the code i created the car checks the patch that is next to it on the lane on its left and the patch in front of it and the back of it. So if the 3 patches on its left are empty then it can change lane. The fuzzy part is that when i run the setup and I press Go sometimes (not always) the car goes out of the 3 basic lanes. To understand this I have 7 lanes. The middle one which I don't use which is lane 0. Then there are 3 lanes on top of lane 0 and 3 below it. So the code I am using refers to the upper 3 lanes where I set the cars but for some reason some of the cars change lane and go to lane -3 then -2 and so forth. If someone can give me a tip I would really appreciate it. Thank you in advance. Tip: if you want to try this code in netlogo keep in mind that on interface tab I have 2 buttons one setup and one go as well as 3 sliders with names: number_of_cars , speed-up , slow-down.

  Read the article

• jQuery Autocomplete plugin (Jorn Zaefferer's) - how to dynamically change the list of displayed valu

  - by Max Williams

  I'm using Jorn Zaefferer's Autocomplete query plugin, http://bassistance.de/jquery-plugins/jquery-plugin-autocomplete/ I have options set so it shows all the values when you click in the empty text field, a bit like a select, and the option is also set so that the user can only choose from the list of values used by the autocomplete (so it's kind of like a select but with autocomplete functionality). I have two radio buttons below the text field, which determine whether the user chooses from a long list or a short list of possible values. I want to update the values used in the autocomplete when one of these radio buttons is clicked. Currently i'm doing this in a not very clever way by calling autocomplete again on the same text field, with the different array of values, but this creates a situation where both are active at once, and i can see the long list peeking out from behind the short list. What i need to do is either a) dynamically change the values used in the autocomplete or b) remove (unbind?) the autocomplete from the text field before re-initialising it. Either of these would do tbh though option a) is kind of nicer. Any ideas anyone? Here's my current code: function initSubjectLongShortList(field, short_values, long_values){ $(".subject_short_long_list").change(function(){ updateSubjectAutocomplete(field, short_values, long_values); }); updateSubjectAutocomplete(field, short_values, long_values); } function updateSubjectAutocomplete(field, short_values, long_values){ if($(".subject_short_long_list:checked").attr('id') == "subject_long_list"){ initSubjectAutocomplete(field, long_values); } else { initSubjectAutocomplete(field, short_values); } } function initSubjectAutocomplete(field, values){ jQuery(field).autocomplete(values, { minChars: 0, //make it appear as soon as we click in the field max: 2000, scrollHeight: 400, matchContains: true, selectFirst: false }); } cheers, max

  Read the article

• Restricting dynamically loaded classes and jars based on a security policy

  - by Max

  Hi, I would like to dynamically load a set of jars or classes (i.e. plugins loaded at runtime). At the same time, I would like to restrict what these plugins are able to do in the JVM. For a test case, I would like to restrict them to pretty much everything (right now I'm just allowing one System.getProperty value to be read). I am currently using a security policy file, but I'm having difficulty specifying a policy for one folder or package in my codeBase, but not another. Here is how my policy looks now: grant codeBase "file:/home/max/programming/java/plugin/plugins/" { permission java.util.PropertyPermission "java.version", "read"; }; grant codeBase "file:/home/max/programming/java/plugin/api/" { permission java.security.AllPermission; }; Where (for testing purposes), all files in the plugins package and folder are restricted, but the classes in the api folder are not. Is this possible? Do I have to create a custom class loader? Is there a better way to go about doing this? Thanks.

  Read the article

• error on connecting to the server : socket io is not defined

  - by max

  i know there's been couple of question about the same problem , i've already check them . i have very simple node.js chat app i have a server running on 8000 port and it works fine my client pages are html , they are running on apache and i'm using socket.io to connect them to the server and it works fine on the local host but when i upload the app on the server i keep on getting this error in the firebug io is not defined var socket = io.connect('http://atenak.com:8000/'); or sometimes it doesn't show that but when i try to broadcast message from cliend i get this error : socket is undefined socket.emit('msg', { data: msg , user:'max' }); the only difference is i've changed the localhost with atenak.com ! here is my html code var socket = io.connect('http://atenak.com:8000/'); var user = 'jack'; socket.on('newmsg', function (data) { if(data.user == user ) { $('#container').html(data.data); } }); function brodcast(){ var msg = $('#fild').val(); socket.emit('msg', { data: msg , user:'max' }); } </script> </head> <body> <div id="container"> </div> <input id="fild" type="text"> <input name="" type="button" onClick="brodcast();"> </body> i have included the sockt.io.js and server is running ok which means socket.io is installed on the server here is the live page http://atenak.com/client.html

  Read the article

• problem finding a header with a c++ makefile

  - by Max

  Hi. I've started working with my first makefile. I'm writing a roguelike in C++ using the libtcod library, and have the following hello world program to test if my environment's up and running: #include "libtcod.hpp" int main() { TCODConsole::initRoot(80, 50, "PartyHack"); TCODConsole::root->printCenter(40, 25, TCOD_BKGND_NONE, "Hello World"); TCODConsole::flush(); TCODConsole::waitForKeypress(true); } My project directory structure looks like this: /CppPartyHack ----/libtcod-1.5.1 # this is the libtcod root folder --------/include ------------libtcod.hpp ----/PartyHack --------makefile --------partyhack.cpp # the above code (while we're here, how do I do proper indentation? Using those dashes is silly.) and here's my makefile: SRCDIR = . INCDIR = ../libtcod-1.5.1/include CFLAGS = $(FLAGS) -I$(INCDIR) -I$(SRCDIR) -Wall CC = gcc CPP = g++ .SUFFIXES: .o .h .c .hpp .cpp $(TEMP)/%.o : $(SRCDIR)/%.cpp $(CPP) $(CFLAGS) -o $@ -c $< $(TEMP)/%.o : $(SRCDIR)/%.c $(CC) $(CFLAGS) -o $@ -c $< CPP_OBJS = $(TEMP)partyhack.o all : partyhack partyhack : $(CPP_OBJS) $(CPP) $(CPP_OBJS) -o $@ -L../libtcod-1.5.1 -ltcod -ltcod++ -Wl,-rpath,. clean : \rm -f $(CPP_OBJS) partyhack I'm using Ubuntu, and my terminal gives me the following errors: max@max-desktop:~/Desktop/Development/CppPartyhack/PartyHack$ make g++ -c -o partyhack.o partyhack.cpp partyhack.cpp:1:23: error: libtcod.hpp: No such file or directory partyhack.cpp: In function ‘int main()’: partyhack.cpp:5: error: ‘TCODConsole’ has not been declared partyhack.cpp:6: error: ‘TCODConsole’ has not been declared partyhack.cpp:6: error: ‘TCOD_BKGND_NONE’ was not declared in this scope partyhack.cpp:7: error: ‘TCODConsole’ has not been declared partyhack.cpp:8: error: ‘TCODConsole’ has not been declared make: * [partyhack.o] Error 1 So obviously, the makefile can't find libtcod.hpp. I've double checked and I'm sure the relative path to libtcod.hpp in INCDIR is correct, but as I'm just starting out with makefiles, I'm uncertain what else could be wrong. My makefile is based off a template that the libtcod designers provided along with the library itself, and while I've looked at a few online makefile tutorials, the code in this makefile is a good bit more complicated than any of the examples the tutorials showed, so I'm assuming I screwed up something basic in the conversion. Thanks for any help.

  Read the article

• Ubuntu server - Problem of routing

  - by Max

  Hi, I have setup a Ubuntu server with Ubuntu Enterprise Cloud. The server is connected to a private LAN with DHCP and Internet access (via a gateway). At first, the server was working fine. It can ping the internet. It can also ping other machine inside LAN. The problem happened after i let the machine idle for more than 1 hour. When I want to use the machine again, I can't ping the internet anymore. I can only ping the machine inside LAN. I try to ping the server from another machine and it's working. Then, i ssh into that server from another machine, and I found that I can ping the internet from that server. It seems that there are some problems in the routing table of this server. Can anyone help me on this? Thank you. Max

  Read the article

• Change default text editor for crontab to vim

  - by Max Williams

  I'm using ubuntu 9.10 and the default text editor is nano, which i hate. (doesn't everyone?) Normally it's not a problem as i just vi or gedit everything but crontab -e is opening with nano. I tried changing it to vim using sudo update-alternatives --config editor and selecting option 3 ("/usr/bin/vim.basic"). This has changed it for sudo and non-sudo alike. But crontab -e still opens nano. Any ideas? max

  Read the article

• Is there a Math.atan2 substitute for j2ME? Blackberry development

  - by Kai

  I have a wide variety of locations stored in my persistent object that contain latitudes and longitudes in double(43.7389, 7.42577) format. I need to be able to grab the user's latitude and longitude and select all items within, say 1 mile. Walking distance. I have done this in PHP so I snagged my PHP code and transferred it to Java, where everything plugged in fine until I figured out J2ME doesn't support atan2(double, double). So, after some searching, I find a small snippet of code that is supposed to be a substitute for atan2. Here is the code: public double atan2(double y, double x) { double coeff_1 = Math.PI / 4d; double coeff_2 = 3d * coeff_1; double abs_y = Math.abs(y)+ 1e-10f; double r, angle; if (x >= 0d) { r = (x - abs_y) / (x + abs_y); angle = coeff_1; } else { r = (x + abs_y) / (abs_y - x); angle = coeff_2; } angle += (0.1963f * r * r - 0.9817f) * r; return y < 0.0f ? -angle : angle; } I am getting odd results from this. My min and max latitude and longitudes are coming back as incredibly low numbers that can't possibly be right. Like 0.003785746 when I am expecting something closer to the original lat and long values (43.7389, 7.42577). Since I am no master of advanced math, I don't really know what to look for here. Perhaps someone else may have an answer. Here is my complete code: package store_finder; import java.util.Vector; import javax.microedition.location.Criteria; import javax.microedition.location.Location; import javax.microedition.location.LocationException; import javax.microedition.location.LocationListener; import javax.microedition.location.LocationProvider; import javax.microedition.location.QualifiedCoordinates; import net.rim.blackberry.api.invoke.Invoke; import net.rim.blackberry.api.invoke.MapsArguments; import net.rim.device.api.system.Bitmap; import net.rim.device.api.system.Display; import net.rim.device.api.ui.Color; import net.rim.device.api.ui.Field; import net.rim.device.api.ui.Graphics; import net.rim.device.api.ui.Manager; import net.rim.device.api.ui.component.BitmapField; import net.rim.device.api.ui.component.RichTextField; import net.rim.device.api.ui.component.SeparatorField; import net.rim.device.api.ui.container.HorizontalFieldManager; import net.rim.device.api.ui.container.MainScreen; import net.rim.device.api.ui.container.VerticalFieldManager; public class nearBy extends MainScreen { private HorizontalFieldManager _top; private VerticalFieldManager _middle; private int horizontalOffset; private final static long animationTime = 300; private long animationStart = 0; private double latitude = 43.7389; private double longitude = 7.42577; private int _interval = -1; private double max_lat; private double min_lat; private double max_lon; private double min_lon; private double latitude_in_degrees; private double longitude_in_degrees; public nearBy() { super(); horizontalOffset = Display.getWidth(); _top = new HorizontalFieldManager(Manager.USE_ALL_WIDTH | Field.FIELD_HCENTER) { public void paint(Graphics gr) { Bitmap bg = Bitmap.getBitmapResource("bg.png"); gr.drawBitmap(0, 0, Display.getWidth(), Display.getHeight(), bg, 0, 0); subpaint(gr); } }; _middle = new VerticalFieldManager() { public void paint(Graphics graphics) { graphics.setBackgroundColor(0xFFFFFF); graphics.setColor(Color.BLACK); graphics.clear(); super.paint(graphics); } protected void sublayout(int maxWidth, int maxHeight) { int displayWidth = Display.getWidth(); int displayHeight = Display.getHeight(); super.sublayout( displayWidth, displayHeight); setExtent( displayWidth, displayHeight); } }; add(_top); add(_middle); Bitmap lol = Bitmap.getBitmapResource("logo.png"); BitmapField lolfield = new BitmapField(lol); _top.add(lolfield); Criteria cr= new Criteria(); cr.setCostAllowed(true); cr.setPreferredResponseTime(60); cr.setHorizontalAccuracy(5000); cr.setVerticalAccuracy(5000); cr.setAltitudeRequired(true); cr.isSpeedAndCourseRequired(); cr.isAddressInfoRequired(); try{ LocationProvider lp = LocationProvider.getInstance(cr); if( lp!=null ){ lp.setLocationListener(new LocationListenerImpl(), _interval, 1, 1); } } catch(LocationException le) { add(new RichTextField("Location exception "+le)); } //_middle.add(new RichTextField("this is a map " + Double.toString(latitude) + " " + Double.toString(longitude))); int lat = (int) (latitude * 100000); int lon = (int) (longitude * 100000); String document = "<location-document>" + "<location lon='" + lon + "' lat='" + lat + "' label='You are here' description='You' zoom='0' />" + "<location lon='742733' lat='4373930' label='Hotel de Paris' description='Hotel de Paris' address='Palace du Casino' postalCode='98000' phone='37798063000' zoom='0' />" + "</location-document>"; // Invoke.invokeApplication(Invoke.APP_TYPE_MAPS, new MapsArguments( MapsArguments.ARG_LOCATION_DOCUMENT, document)); _middle.add(new SeparatorField()); surroundingVenues(); _middle.add(new RichTextField("max lat: " + max_lat)); _middle.add(new RichTextField("min lat: " + min_lat)); _middle.add(new RichTextField("max lon: " + max_lon)); _middle.add(new RichTextField("min lon: " + min_lon)); } private void surroundingVenues() { double point_1_latitude_in_degrees = latitude; double point_1_longitude_in_degrees= longitude; // diagonal distance + error margin double distance_in_miles = (5 * 1.90359441) + 10; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, 45); double lat_limit_1 = latitude_in_degrees; double lon_limit_1 = longitude_in_degrees; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, 135); double lat_limit_2 = latitude_in_degrees; double lon_limit_2 = longitude_in_degrees; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, -135); double lat_limit_3 = latitude_in_degrees; double lon_limit_3 = longitude_in_degrees; getCords (point_1_latitude_in_degrees, point_1_longitude_in_degrees, distance_in_miles, -45); double lat_limit_4 = latitude_in_degrees; double lon_limit_4 = longitude_in_degrees; double mx1 = Math.max(lat_limit_1, lat_limit_2); double mx2 = Math.max(lat_limit_3, lat_limit_4); max_lat = Math.max(mx1, mx2); double mm1 = Math.min(lat_limit_1, lat_limit_2); double mm2 = Math.min(lat_limit_3, lat_limit_4); min_lat = Math.max(mm1, mm2); double mlon1 = Math.max(lon_limit_1, lon_limit_2); double mlon2 = Math.max(lon_limit_3, lon_limit_4); max_lon = Math.max(mlon1, mlon2); double minl1 = Math.min(lon_limit_1, lon_limit_2); double minl2 = Math.min(lon_limit_3, lon_limit_4); min_lon = Math.max(minl1, minl2); //$qry = "SELECT DISTINCT zip.zipcode, zip.latitude, zip.longitude, sg_stores.* FROM zip JOIN store_finder AS sg_stores ON sg_stores.zip=zip.zipcode WHERE zip.latitude<=$lat_limit_max AND zip.latitude>=$lat_limit_min AND zip.longitude<=$lon_limit_max AND zip.longitude>=$lon_limit_min"; } private void getCords(double point_1_latitude, double point_1_longitude, double distance, int degs) { double m_EquatorialRadiusInMeters = 6366564.86; double m_Flattening=0; double distance_in_meters = distance * 1609.344 ; double direction_in_radians = Math.toRadians( degs ); double eps = 0.000000000000005; double r = 1.0 - m_Flattening; double point_1_latitude_in_radians = Math.toRadians( point_1_latitude ); double point_1_longitude_in_radians = Math.toRadians( point_1_longitude ); double tangent_u = (r * Math.sin( point_1_latitude_in_radians ) ) / Math.cos( point_1_latitude_in_radians ); double sine_of_direction = Math.sin( direction_in_radians ); double cosine_of_direction = Math.cos( direction_in_radians ); double heading_from_point_2_to_point_1_in_radians = 0.0; if ( cosine_of_direction != 0.0 ) { heading_from_point_2_to_point_1_in_radians = atan2( tangent_u, cosine_of_direction ) * 2.0; } double cu = 1.0 / Math.sqrt( ( tangent_u * tangent_u ) + 1.0 ); double su = tangent_u * cu; double sa = cu * sine_of_direction; double c2a = ( (-sa) * sa ) + 1.0; double x= Math.sqrt( ( ( ( 1.0 /r /r ) - 1.0 ) * c2a ) + 1.0 ) + 1.0; x= (x- 2.0 ) / x; double c= 1.0 - x; c= ( ( (x * x) / 4.0 ) + 1.0 ) / c; double d= ( ( 0.375 * (x * x) ) -1.0 ) * x; tangent_u = distance_in_meters /r / m_EquatorialRadiusInMeters /c; double y= tangent_u; boolean exit_loop = false; double cosine_of_y = 0.0; double cz = 0.0; double e = 0.0; double term_1 = 0.0; double term_2 = 0.0; double term_3 = 0.0; double sine_of_y = 0.0; while( exit_loop != true ) { sine_of_y = Math.sin(y); cosine_of_y = Math.cos(y); cz = Math.cos( heading_from_point_2_to_point_1_in_radians + y); e = (cz * cz * 2.0 ) - 1.0; c = y; x = e * cosine_of_y; y = (e + e) - 1.0; term_1 = ( sine_of_y * sine_of_y * 4.0 ) - 3.0; term_2 = ( ( term_1 * y * cz * d) / 6.0 ) + x; term_3 = ( ( term_2 * d) / 4.0 ) -cz; y= ( term_3 * sine_of_y * d) + tangent_u; if ( Math.abs(y - c) > eps ) { exit_loop = false; } else { exit_loop = true; } } heading_from_point_2_to_point_1_in_radians = ( cu * cosine_of_y * cosine_of_direction ) - ( su * sine_of_y ); c = r * Math.sqrt( ( sa * sa ) + ( heading_from_point_2_to_point_1_in_radians * heading_from_point_2_to_point_1_in_radians ) ); d = ( su * cosine_of_y ) + ( cu * sine_of_y * cosine_of_direction ); double point_2_latitude_in_radians = atan2(d, c); c = ( cu * cosine_of_y ) - ( su * sine_of_y * cosine_of_direction ); x = atan2( sine_of_y * sine_of_direction, c); c = ( ( ( ( ( -3.0 * c2a ) + 4.0 ) * m_Flattening ) + 4.0 ) * c2a * m_Flattening ) / 16.0; d = ( ( ( (e * cosine_of_y * c) + cz ) * sine_of_y * c) + y) * sa; double point_2_longitude_in_radians = ( point_1_longitude_in_radians + x) - ( ( 1.0 - c) * d * m_Flattening ); heading_from_point_2_to_point_1_in_radians = atan2( sa, heading_from_point_2_to_point_1_in_radians ) + Math.PI; latitude_in_degrees = Math.toRadians( point_2_latitude_in_radians ); longitude_in_degrees = Math.toRadians( point_2_longitude_in_radians ); } public double atan2(double y, double x) { double coeff_1 = Math.PI / 4d; double coeff_2 = 3d * coeff_1; double abs_y = Math.abs(y)+ 1e-10f; double r, angle; if (x >= 0d) { r = (x - abs_y) / (x + abs_y); angle = coeff_1; } else { r = (x + abs_y) / (abs_y - x); angle = coeff_2; } angle += (0.1963f * r * r - 0.9817f) * r; return y < 0.0f ? -angle : angle; } private Vector fetchVenues(double max_lat, double min_lat, double max_lon, double min_lon) { return new Vector(); } private class LocationListenerImpl implements LocationListener { public void locationUpdated(LocationProvider provider, Location location) { if(location.isValid()) { nearBy.this.longitude = location.getQualifiedCoordinates().getLongitude(); nearBy.this.latitude = location.getQualifiedCoordinates().getLatitude(); //double altitude = location.getQualifiedCoordinates().getAltitude(); //float speed = location.getSpeed(); } } public void providerStateChanged(LocationProvider provider, int newState) { // MUST implement this. Should probably do something useful with it as well. } } } please excuse the mess. I have the user lat long hard coded since I do not have GPS functional yet. You can see the SQL query commented out to know how I plan on using the min and max lat and long values. Any help is appreciated. Thanks

  Read the article

• SQL SERVER – Beginning of SQL Server Architecture – Terminology – Guest Post

  - by pinaldave

  SQL Server Architecture is a very deep subject. Covering it in a single post is an almost impossible task. However, this subject is very popular topic among beginners and advanced users.  I have requested my friend Anil Kumar who is expert in SQL Domain to help me write  a simple post about Beginning SQL Server Architecture. As stated earlier this subject is very deep subject and in this first article series he has covered basic terminologies. In future article he will explore the subject further down. Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. In this Article we will discuss about MS SQL Server architecture. The major components of SQL Server are: Relational Engine Storage Engine SQL OS Now we will discuss and understand each one of them. 1) Relational Engine: Also called as the query processor, Relational Engine includes the components of SQL Server that determine what your query exactly needs to do and the best way to do it. It manages the execution of queries as it requests data from the storage engine and processes the results returned. Different Tasks of Relational Engine: Query Processing Memory Management Thread and Task Management Buffer Management Distributed Query Processing 2) Storage Engine: Storage Engine is responsible for storage and retrieval of the data on to the storage system (Disk, SAN etc.). to understand more, let’s focus on the following diagram. When we talk about any database in SQL server, there are 2 types of files that are created at the disk level – Data file and Log file. Data file physically stores the data in data pages. Log files that are also known as write ahead logs, are used for storing transactions performed on the database. Let’s understand data file and log file in more details: Data File: Data File stores data in the form of Data Page (8KB) and these data pages are logically organized in extents. Extents: Extents are logical units in the database. They are a combination of 8 data pages i.e. 64 KB forms an extent. Extents can be of two types, Mixed and Uniform. Mixed extents hold different types of pages like index, System, Object data etc. On the other hand, Uniform extents are dedicated to only one type. Pages: As we should know what type of data pages can be stored in SQL Server, below mentioned are some of them: Data Page: It holds the data entered by the user but not the data which is of type text, ntext, nvarchar(max), varchar(max), varbinary(max), image and xml data. Index: It stores the index entries. Text/Image: It stores LOB ( Large Object data) like text, ntext, varchar(max), nvarchar(max),  varbinary(max), image and xml data. GAM & SGAM (Global Allocation Map & Shared Global Allocation Map): They are used for saving information related to the allocation of extents. PFS (Page Free Space): Information related to page allocation and unused space available on pages. IAM (Index Allocation Map): Information pertaining to extents that are used by a table or index per allocation unit. BCM (Bulk Changed Map): Keeps information about the extents changed in a Bulk Operation. DCM (Differential Change Map): This is the information of extents that have modified since the last BACKUP DATABASE statement as per allocation unit. Log File: It also known as write ahead log. It stores modification to the database (DML and DDL). Sufficient information is logged to be able to: Roll back transactions if requested Recover the database in case of failure Write Ahead Logging is used to create log entries Transaction logs are written in chronological order in a circular way Truncation policy for logs is based on the recovery model SQL OS: This lies between the host machine (Windows OS) and SQL Server. All the activities performed on database engine are taken care of by SQL OS. It is a highly configurable operating system with powerful API (application programming interface), enabling automatic locality and advanced parallelism. SQL OS provides various operating system services, such as memory management deals with buffer pool, log buffer and deadlock detection using the blocking and locking structure. Other services include exception handling, hosting for external components like Common Language Runtime, CLR etc. I guess this brief article gives you an idea about the various terminologies used related to SQL Server Architecture. In future articles we will explore them further. Guest Author  The author of the article is Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• Taking advantage of Windows Azure CDN and Dynamic Pages in ASP.NET - Caching content from hosted services

  - by Shawn Cicoria

  With the updates to Windows Azure CDN announced this week [1] I wanted to help illustrate the capability with a working sample that will serve up dynamic content from an ASP.NET site hosted in a WebRole. First, to get a good overview of the capability you can read the Overview of the Windows Azure CDN [2] content on MSDN. When you setup the ability to cache content from a hosted service, the requirement is to provide a path to your role’s DNS endpoint that ends in the path “/cdn”.  Additionally, you then map CDN to that service. What WAZ CDN does, is allow you to then map that through the CDN to your host.  The CDN will then make a request to your host on your client’s behalf. The requirement is still that your client, and any Url’s that are to be serviced through the CDN and this capability have to use the CDN DNS name and not your host – no different than what CDN does for Blog storage. The following 2 URL’s are samples of how the client needs to issue the requests. Windows Azure hosted service URL: http: //myHostedService.cloudapp.net/cdn/music.aspx   - for regular “dynamic” content Windows Azure CDN URL: http: //<identifier>.vo.msecnd.net/music.aspx   - for CDN “cachable” content. The first URL path’s the request direct to your host into the Azure datacenter.  The 2nd URL paths the request through the CDN infrastructure, where CDN will make the determination to request the content on behalf of the client to the Azure datacenter and your host on the /cdn path. The big advantage here is you can apply logic to your content creation.  What’s important is emitting the CDN friendly headers that allow CDN to request and re-request only when you designate based upon it’s rules of “staleness” as described in the overview page. With IIS7.5 there is an underlying issue when the Managed Module “OutputCache” is enabled that in order to emit a good header for your content, you’ll need to remove, and in my sample, helps provide CDN friendly headers.  You get IIS 7.5 when running under OS Family “2” in your service configuration. By default, and when the OutputCache managed module is loaded, if you use the HttpResponse.CachePolicy to set the Http Headers for “max-age” when the HttpCacheability is “Public”, you will NOT get the “max-age” emitted as part of the “Cache-control:” header.  Instead, the OutputCache module will remove “max-age” and just emit “public”.  It works ok when Cacheability is set to “private”. To work around the issue and ensure your code as follows emits the full max-age along with the public option, you need to remove as follows: <system.webServer>   <modules runAllManagedModulesForAllRequests="true">     <remove name="OutputCache"/>   </modules> </system.webServer>   Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(rv));   In the attached solution, the way I approached it was to have a VirtualApplication under the root site that has it’s own web.config  - this VirtualApplication is the /cdn of the site and when deployed to Azure as a Web Role will surface as a distinct IIS Application – along with a separate AppDomain. The CDN Sample is a simple Web Forms site that the /default landing page contains 3 IFrames to host: 1. Content direct from the host @   http://xxxx.cloudapp.net/cdn 2. Content via the CDN @ http://azxxx.vo.msecnd.net  3. Simple list of recent requests – showing where the request came from.   When you run the sample the first time you hit the page, both the Host and the CDN will cause 2 initial requests to hit the host.  You won’t see the first requests in the list because of timing – but if you refresh, you’ll see that the list will show that you have 2 requests initially. 1. sourced direct from the Browser to the HOST 2. sourced via the CDN The picture above shows the call-outs of each of those requests – green rows showing requests coming direct to the HOST, yellow showing the CDN request.  The IP addresses of the green items are direct from the client, where the CDN is from the CDN data center. As you refresh the page (hit Ctrl+F5 to force a full refresh and avoid “304 – not changed”) you’ll see that the request to the HOST get’s processed direct; but the request to the CDN endpoint is serviced direct from the CDN and doesn’t incur any additional request back to the HOST. The following is the Headers from the CDN response (Status-Line) HTTP/1.1 200 OK Age 13 Cache-Control public, max-age=300 Connection keep-alive Content-Length 6212 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:14 GMT Expires Fri, 11 Mar 2011 20:52:01 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET   The following are the Headers from the HOST response (Status-Line) HTTP/1.1 200 OK Cache-Control public, max-age=300 Content-Length 6189 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:15 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET   You can see that with the CDN request, the countdown (age) starts for aging the content. The full sample is located here: CDNSampleSite.zip [1] http://blogs.msdn.com/b/windowsazure/archive/2011/03/09/now-available-updated-windows-azure-sdk-and-windows-azure-management-portal.aspx [2] http://msdn.microsoft.com/en-us/library/ff919703.aspx

  Read the article

• How big can my SharePoint 2010 installation be?

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). 3 years ago, I had published “How big can my SharePoint 2007 installation be?” Well, SharePoint 2010 has significant under the covers improvements. So, how big can your SharePoint 2010 installation be? There are three kinds of limits you should know about Hard limits that cannot be exceeded by design. Configurable that are, well configurable – but the default values are set for a pretty good reason, so if you need to tweak, plan and understand before you tweak. Soft limits, you can exceed them, but it is not recommended that you do. Before you read any of the limits, read these two important disclaimers - 1. The limit depends on what you’re doing. So, don’t take the below as gospel, the reality depends on your situation. 2. There are many additional considerations in planning your SharePoint solution scalability and performance, besides just the below. So with those in mind, here goes.   Hard Limits - Zones per web app 5 RBS NAS performance Time to first byte of any response from NAS must be less than 20 milliseconds List row size 8000 bytes driven by how SP stores list items internally Max file size 2GB (default is 50MB, configurable). RBS does not increase this limit. Search metadata properties 10,000 per item crawled (pretty damn high, you’ll never need to worry about it). Max # of concurrent in-memory enterprise content types 5000 per web server, per tenant Max # of external system connections 500 per web server PerformancePoint services using Excel services as a datasource No single query can fetch more than 1 million excel cells Office Web Apps Renders One doc per second, per CPU core, per Application server, limited to a maximum of 8 cores.   Configurable Limits - Row Size Limit 6, configurable via SPWebApplication.MaxListItemRowStorage property List view lookup 8 join operations per query Max number of list items that a single operation can process at one time in normal hours 5000 Configurable via SPWebApplication.MaxItemsPerThrottledOperation   Also you get a warning at 3000, which is configurable via SPWebApplication.MaxItemsPerThrottledOperationWarningLevel   In addition, throttle overrides can be requested, throttle overrides can be disabled, and time windows can be set when throttle is disabled. Max number of list items for administrators that a single operation can process at one time in normal hours 20000 Configurable via SPWebApplication.MaxItemsPerThrottledOperationOverride Enumerating subsites 2000 Word and Powerpoint co-authoring simultaneous editors 10 (Hard limit is 99). # of webparts on a page 25 Search Crawl DBs per search service app 10 Items per crawl db 25 million Search Keywords 200 per site collection. There is a max limit of 5000, which can then be modified by editing the web.config/client.config. Concurrent # of workflows on a content db 15. Workflows running in the timer service are not counted in this limit. Further workflows are queued. Can be configured via the Set-SPFarmConfig powershell commandlet. Number of events picked by the workflow timer job and delivered to workflows 100. You can increase this limit by running additional instances of the workflow timer service. Visio services file size 50MB Visio web drawing recalculation timeout 120 seconds Configurable via – Powershell commandlet Set-SPVisioPerformance Visio services minimum and maximum cache age for data connected diagrams 0 to 24 hours. Default is 60 minutes. Configurable via – Powershell commandlet Set-SPVisioPerformance   Soft Limits - Content Databases 300 per web app Application Pools 10 per web server Managed Paths 20 per web app Content Database Size 200GB per Content DB Size of 1 site collection 100GB # of sites in a site collection 250,000 Documents in a library 30 Million, with nesting. Depends heavily on type and usage and size of documents. Items 30 million. Depends heavily on usage of items. SPGroups one SPUser can be in 5000 Users in a site collection 2 million, depends on UI, nesting, containers and underlying user store AD Principals in a SPGroup 5000 SPGroups in a site collection 10000 Search Service Instances 20 Indexed Items in Search 100 million Crawl Log entries 100 million Search Alerts 1 million per search application Search Crawled Properties 1/2 million URL removals in search 100 removals per operation User Profiles 2 million per service application Social Tags 500 million per social database Comment on the article ....

  Read the article

• SQL SERVER – SSMS: Database Consistency History Report

  - by Pinal Dave

  Doctor and Database The last place I like to visit is always a hospital. With the monsoon season starting, intermittent rains, it has become sort of a routine to get a cycle of fever every other year (seriously I hate it). So when I visit my doctor, it is always interesting in the way he quizzes me. The routine question of – “How many days have you had this?”, “Is there any pattern?”, “Did you drench in rain?”, “Do you have any other symptom?” and so on. The idea here is that the doctor wants to find any anomaly or a pattern that will guide him to a viral or bacterial type. Most of the time they get it based on experience and sometimes after a battery of tests. So if there is consistent behavior to your problem, there is always a solution out. SQL Server has its way to find if the server data / files are in consistent state using the DBCC commands. Back to SQL Server In real life, Database consistency check is one of the critical operations a DBA generally doesn’t give much priority. Many readers of my blogs have asked many times, how do we know if the database is consistent? How do I read output of DBCC CHECKDB and find if everything is right or not? My common answer to all of them is – look at the bottom of checkdb (or checktable) output and look for below line. CHECKDB found 0 allocation errors and 0 consistency errors in database ‘DatabaseName’. Above is a “good sign” because we are seeing zero allocation and zero consistency error. If you are seeing non-zero errors then there is some problem with the database. Sample output is shown as below: CHECKDB found 0 allocation errors and 2 consistency errors in database ‘DatabaseName’. repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (DatabaseName). If we see non-zero error then most of the time (not always) we get repair options depending on the level of corruption. There is risk involved with above option (repair_allow_data_loss), that is – we would lose the data. Sometimes the option would be repair_rebuild which is little safer. Though these options are available, it is important to find the root cause to the problem. In standard report, there is a report which can show the history of checkdb executed for the selected database. Since this is a database level report, we need to right click on database, click Reports, click Standard Reports and then choose “Database Consistency History” report. The information in this report is picked from default trace. If default trace is disabled or there is no checkdb run or information is not there in default trace (because it’s rolled over), we would get report like below. As we can see report says it very clearly: Currently, no execution history of CHECKDB is available or default trace is not enabled. To demonstrate, I have caused corruption in one of the database and did below steps. Run CheckDB so that errors are reported. Fix the corruption by losing the data using repair option Run CheckDB again to check if corruption is cleared. After that I have launched the report and below is what we would see. If you are lazy like me and don’t want to run the report manually for each database then below query would be handy to provide same report for all database. This query is runs behind the scenes by the report. All I have done is remove the filter for database name (at the last – highlighted). DECLARE @curr_tracefilename VARCHAR(500); DECLARE @base_tracefilename VARCHAR(500); DECLARE @indx INT; SELECT @curr_tracefilename = path FROM sys.traces WHERE is_default = 1; SET @curr_tracefilename = REVERSE(@curr_tracefilename); SELECT @indx  = PATINDEX('%\%', @curr_tracefilename) ; SET @curr_tracefilename = REVERSE(@curr_tracefilename); SET @base_tracefilename = LEFT( @curr_tracefilename,LEN(@curr_tracefilename) - @indx) + '\log.trc'; SELECT  SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),36, PATINDEX('%executed%',TEXTData)-36) AS command ,       LoginName ,       StartTime ,       CONVERT(INT,SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%found%',TEXTData) +6,PATINDEX('%errors %',TEXTData)-PATINDEX('%found%',TEXTData)-6)) AS errors ,       CONVERT(INT,SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%repaired%',TEXTData) +9,PATINDEX('%errors.%',TEXTData)-PATINDEX('%repaired%',TEXTData)-9)) repaired ,       SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%time:%',TEXTData)+6,PATINDEX('%hours%',TEXTData)-PATINDEX('%time:%',TEXTData)-6)+':'+SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%hours%',TEXTData) +6,PATINDEX('%minutes%',TEXTData)-PATINDEX('%hours%',TEXTData)-6)+':'+SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%minutes%',TEXTData) +8,PATINDEX('%seconds.%',TEXTData)-PATINDEX('%minutes%',TEXTData)-8) AS time FROM::fn_trace_gettable( @base_tracefilename, DEFAULT) WHERE EventClass = 22 AND SUBSTRING(TEXTData,36,12) = 'DBCC CHECKDB' -- AND DatabaseName = @DatabaseName; Don’t get worried about the logic above. All it is doing is reading the trace files, parsing below entry and getting out information for underlined words. DBCC CHECKDB (CorruptedDatabase) executed by sa found 2 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 0 seconds.  Internal database snapshot has split point LSN = 00000029:00000030:0001 and first LSN = 00000029:00000020:0001. Hopefully now onwards you would run checkdb and understand the importance of it. As responsible DBAs I am sure you are already doing it, let me know how often do you actually run them on you production environment? Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

  Read the article

• WindowsIdentity Token in Legacy ASP

  - by Max Schmeling

  I've created a .Net library at work that is used by all of our developers. The security part of it uses Microsoft AzMan for the security backend. In order to create a security (AzMan) ClientContext I have to pass it a token value (as a uint). This is all fine an dandy until I needed to make a COM wrapper for our common library so some of our legacy pages could take advantage of it without being rewritten for now. I cannot figure out how to get the token value to pass to AzMan from legacy ASP. The COM wrapper is setup to run as a COM Server and runs as a specific user that we use here for all COM objects, therefor the common library can't just pull the identity using .Net. Any ideas?

  Read the article

• How should bug tracking and help tickets integrate?

  - by Max Schmeling

  I have a little experience with bug tracking systems such as FogBugz where help tickets are issues are (or can be) bugs, and I have some experience using a bug tracking system internally completely separate from a help center system. My question is, in a company with an existing (home-grown) help center system where replacing it is not an option, how should a bug tracking system (probably Mantis) be integrated into the process? Right now help tickets get put in for issues, questions, etc and they get assigned to the appropriate person (PC Tech, Help Desk staff, or if it's an application issue they can't solve in the help desk it gets assigned to a developer). A user can put a request for small modifications or fixes to an application in a help ticket and the developer it gets assigned to will make the change at some point, apply their time to that ticket, and then close the ticket when it goes to production. We don't currently have a bug tracking system, so I'm looking into the best way to integrate one. Should we just take the help tickets and put it into the bug tracking system if it's a bug (or issue or feature request) and then close the ticket if it's not an emergency fix? We probably don't want to expose the bug tracking system to anyone else as they wouldn't know what to put in the help center system and what to put in the bug tracker... right? Any thoughts? Suggestions? Tips? Advice? To-dos? Not to-dos? etc...

  Read the article

• Create edges in Blender

  - by Mikey

  I've worked with 3DS Max in Uni and am trying to learn Blender. My problem is I know a lot of simple techniques from 3DS max that I'm having trouble translating into Blender. So my question is: Say I have a poly in the middle of a mesh and I want to split it in two. Simply adding an edge between two edges. This would cause a two 5gons either side. It's a simple technique I use every now and then when I want to modify geometry. It's called "Edge connect" in 3DS Max. In Blender the only edge connect method I can find is to create edge loops, not helpful when aiming at low poly iPhone games. Is there an equivalent in blender?

  Read the article

• Fixing LINQ Error: Sequence contains no elements

  - by ChrisD

  I’ve read some posts regarding this error when using the First() or Single() command.   They suggest using FirstOrDefault() or SingleorDefault() instead. But I recently encountered it when using a Sum() command in conjunction with a Where():   Code Snippet var effectiveFloor = policies.Where(p => p.PricingStrategy == PricingStrategy.EstablishFloor).Max(p => p.Amount);   When the Where() function eliminated all the items in the policies collection, the Sum() command threw the “Sequence contains no elements” exception.   Inserting the DefaultIfEmpty() command between the Where() and Sum(), prevents this error: Code Snippet var effectiveFloor = policies.Where(p => p.PricingStrategy == PricingStrategy.EstablishFloor).DefaultIfEmpty().Max(p => p.Amount);   but now throws a Null Reference exception!   The Fix: Using a combination of DefaultIfEmpty() and a null check in the Sum() command solves this problem entirely: Code Snippet var effectiveFloor = policies.Where(p => p.PricingStrategy == PricingStrategy.EstablishFloor).DefaultIfEmpty().Max(p =>  p==null?0 :p.Amount);

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >