Search Results

Search found 13355 results on 535 pages for 'applescript studio'.

Page 260/535 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

  • C# Express 2010 Multi-Threading

    - by Chris Evans
    Hi, I have a windows app that I have been running in c# Express 2008 for a year and have been trying to convert it over the last few days to 2010. The problem I am having is it is a multi-threaded application that has to run a series of code every second. What it does is have a main thread, that calls 3 worker threads, waits for them to finish then does some additional processing, sleeps till 1 second and runs again. The problem is part of the code can call a web service that takes 8 seconds to respond, so this bit of code gets called using ThreadPool.QueueUserWorkItem. The problem is when running in 2010 when this part of the code gets called the main thread continues to run but when it awakens the sub threads it hangs until the Threadpool method finishes running. This never happens in 2008. Any suggestions? So far I put that bit of code in it's own thread rather than using Threadpool but same issue.

    Read the article

  • Advantages of SQLServer vs. MySQL for C#/.NET4 Cloud Applications

    - by Ed Eichman
    I am considering building several C#/.NET4 applications all using a central, cloud based database. In addition, several LAMP (MySQL) web shops will be accessing the cloud DB. MySQL is the database that I'm most familiar with, and my default selection for the cloud DB would be MySQL on Amazon or Joyent. However, I was wondering what development "extras" are available for SQLServer in VisualStudio 2010 that are not available for MySQL. Are there any "killer features" that should make me consider SQLServer instead of MySQL?

    Read the article

  • What /else/ causes this?

    - by Mordachai
    MFC Toolbox Library.lib(SimpleFileIO.obj) : error LNK2005: _wcsnlen already defined in libcmtd.lib(wcslen_s.obj) fatal error LNK1169: one or more multiply defined symbols found This is driving me nuts. Normally, one would get this if the various projects that are a part of their solution do not agree on which CRT to use (single threaded, multi-threaded, release or debug). However, I have been over this thing about 500 times now, and they all agree. Background: this is a VS 2010 project just converted from VS 2008. MFC Toolbox Library.lib is set to compile as a static library, using /MTd, as is the target .exe I am trying to compile in this solution. Further, the solution that this is being converted from (VS 2008) already compiles & links properly!!! So it's not like that there is a disagreement between the two .vcproj's - or at least there wasn't before the conversion. Furthermore, the MFC Toolbox Library is used by about 25 other projects in another solution - and in that solution (Master Build English) it compiles & links against those other projects without complaint in both debug and release targets. I have just spent the last hour going over every single project property for this target project (Cimex Header Viewer) vs. several different target exe projects in Master Build English solution - and I cannot find a difference. They appear to be identical, excepting that they're different names. I've tried doing a clean & build all. I'm simply out of ideas. Does anyone have a thought on what else I might investigate??? I think I'm ready to start chewing glass. :(

    Read the article

  • random number in VC++

    - by BillDickson
    int randomNumber = (double)rand() / (RAND_MAX + 1) * (10 - 0) + 0; is the code I'm using, it is getting a random number, but is getting the SAME random combination every time? Can anyone see what I'm doing wrong?

    Read the article

  • Interop type cannot be embedded

    - by Jan
    I am creating an web application on the .net 4.0 framework (beta2 ) in C#. When I try to use a assembly called "ActiveHomeScriptLib", I get the following error: Interop type 'ActiveHomeScriptLib.ActiveHomeClass' cannot be embedded. Use the applicable interface instead. When I change the framework to version 3.5, I don't have any errors. What is an Interop Type and why does this only occur when I use the 4.0 framework.

    Read the article

  • Detect pointer arithmetics because of LARGEADDRESSAWARE

    - by Suma
    I would like to switch my application to LARGEADDRESSAWARE. One of issues to watch for is pointer arithmetic, as pointer difference can no longer be represented as signed 32b. Is there some way how to find automatically all instances of pointer subtraction in a large C++ project? If not, is there some "least effort" manual or semi-automatic method how to achieve this?

    Read the article

  • Using git (or some other VCS) at your company

    - by supercheetah
    Some friends of mine and I were talking recently about version control, and how they were using VSS at their jobs, and were probably going to be moving off of that soon. One of them said that his company will likely be going with Team Foundation Server. Eventually, the conversation did get around to talking about some of the open source VCSes out there, including git and SVN. None of us really knew about any companies that use either of these internally, although we imagined that a number of them did so for SVN, but we weren't too sure about git. I brought up Google and Android using it, but my friend figured that's only for the public facing source code, and that they may use something different for internal projects. Apparently it's more than just SCM that makes TFS so intriguing: Microsoft Sales people and support (although my friend did point out somethings to his managers that he thought might be misleading on MS' part) Integration of things beyond SCM, including project management (I'm just finding out that there are geared towards the same things for git) Again, it's Microsoft, and the transition from VSS to TFS seems logical (or does it?) I'm not much of a fan of SVN, so I didn't really bring it up much, but I am curious about whether or not git is used at your company for internal projects. Have you thought about it, and decided against it? Any reason why?

    Read the article

  • Gridview Datasource Server error

    - by salvationishere
    I am developing a C# VS 2008 and SQL Server 2008 website. However, I get the below error now when I first run this: The DataSourceID of 'GridView1' must be the ID of a control of type IDataSource. A control with ID 'AdventureWorks3.mdf' could not be found What is causing this error? Here is my default.aspx file. I have configured GridView1 to use my AdventureWorks3.mdf file, stored in my App_Data folder. Do I need to add this folder name to this ASPX file? <%@ Page Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="MainContent" Runat="Server"> <asp:Panel runat="server" ID="AuthenticatedMessagePanel"> <asp:Label runat="server" ID="WelcomeBackMessage"></asp:Label> <table> <tr > <td> <asp:Label ID="tableLabel" runat="server" Font-Bold="True" Text="Select target table:"></asp:Label> </td> <td> <asp:Label ID="inputLabel" runat="server" Font-Bold="True" Text="Select input file:"></asp:Label> </td></tr> <tr><td valign="top"> <asp:Label ID="feedbackLabel" runat="server"></asp:Label> <asp:GridView ID="GridView1" runat="server" style="WIDTH: 400px;" CellPadding="4" ForeColor="#333333" GridLines="None" onselectedindexchanged="GridView1_SelectedIndexChanged" AutoGenerateSelectButton="True" DataSourceID="AdventureWorks3.mdf" > <RowStyle BackColor="#F7F6F3" ForeColor="#333333" /> <FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" /> <SelectedRowStyle BackColor="#E2DED6" Font-Bold="True" ForeColor="#333333" /> <HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <EditRowStyle BackColor="#999999" /> <AlternatingRowStyle BackColor="White" ForeColor="#284775" /> </asp:GridView> </td> <td valign="top"> <input id="uploadFile" type="file" size="26" runat="server" name="uploadFile" title="UploadFile" class="greybar" enableviewstate="True" /> </td></tr> </table> </asp:Panel> <asp:Panel runat="Server" ID="AnonymousMessagePanel"> <asp:HyperLink runat="server" ID="lnkLogin" Text="Log In" NavigateUrl="~/Login.aspx"> </asp:HyperLink> </asp:Panel> </asp:Content> Or what about my ASPX.CS file? Is this the problem? using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Collections.Generic; using System.IO; using System.Drawing; using System.ComponentModel; using System.Data.SqlClient; using ADONET_namespace; using System.Security.Principal; //using System.Windows; public partial class _Default : System.Web.UI.Page //namespace AddFileToSQL { //protected System.Web.UI.HtmlControls.HtmlInputFile uploadFile; protected System.Web.UI.HtmlControls.HtmlInputButton btnOWrite; protected System.Web.UI.HtmlControls.HtmlInputButton btnAppend; protected System.Web.UI.WebControls.Label Label1; protected static string inputfile = ""; public static string targettable; public static string selection; // Number of controls added to view state protected int default_NumberOfControls { get { if (ViewState["default_NumberOfControls"] != null) { return (int)ViewState["default_NumberOfControls"]; } else { return 0; } } set { ViewState["default_NumberOfControls"] = value; } } protected void uploadFile_onclick(object sender, EventArgs e) { } protected void Load_GridData() { GridView1.DataSource = ADONET_methods.DisplaySchemaTables(); GridView1.DataBind(); } protected void btnOWrite_Click(object sender, EventArgs e) { if (uploadFile.PostedFile.ContentLength > 0) { feedbackLabel.Text = "You do not have sufficient access to overwrite table records."; } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void btnAppend_Click(object sender, EventArgs e) { string fullpath = Page.Request.PhysicalApplicationPath; string path = uploadFile.PostedFile.FileName; if (File.Exists(path)) { // Create a file to write to. try { StreamReader sr = new StreamReader(path); string s = ""; while (sr.Peek() > 0) s = sr.ReadLine(); sr.Close(); } catch (IOException exc) { Console.WriteLine(exc.Message + "Cannot open file."); return; } } if (uploadFile.PostedFile.ContentLength > 0) { inputfile = System.IO.File.ReadAllText(path); Session["Message"] = inputfile; Response.Redirect("DataMatch.aspx"); } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void Page_Load(object sender, EventArgs e) { if (Request.IsAuthenticated) { WelcomeBackMessage.Text = "Welcome back, " + User.Identity.Name + "!"; // Reference the CustomPrincipal / CustomIdentity CustomIdentity ident = User.Identity as CustomIdentity; if (ident != null) WelcomeBackMessage.Text += string.Format(" You are the {0} of {1}.", ident.Title, ident.CompanyName); AuthenticatedMessagePanel.Visible = true; AnonymousMessagePanel.Visible = false; //if (!Page.IsPostBack) //{ // Load_GridData(); //} } else { AuthenticatedMessagePanel.Visible = false; AnonymousMessagePanel.Visible = true; } } protected void GridView1_SelectedIndexChanged(object sender, EventArgs e) { GridViewRow row = GridView1.SelectedRow; targettable = row.Cells[2].Text; } }

    Read the article

  • Trying to draw an image to a form, but not refreshing

    - by flavour404
    Hi, We are using graphics context of a form to draw an image. However it works fine on initial paint but the image is not being updated unless we set a breakpoint and run it in debug mode, stepping through each time. What is a good way of making a seperate thread to paint on to a form every second? Thanks.

    Read the article

  • A new MEF error I've not seen before -- "The export is not assignable to type..."

    - by Dave
    I was very surprised to get this error today, as it's one that I've never encountered before. Everything in the code looked okay, so I did some searches. The previous questions and their respective answers didn't help. This one was solved when the poster made sure his assembly references were consistent. I don't have this issue right now because I'm currently referencing another project in my solution. This one was solved when the poster was instructed to use ImportMany, but I am already using it (I think properly, too) to try to load multiple plugins This one was solved when the poster realized that there was a platform target mismatch. I've already gone through my projects to ensure that everything targets x86. So here's what I am trying to do. I have a plugin that owns a connection to a device. I might also need to be able to share that connection with another plugin. I decided that the cleanest way to do this was to create an interface that would allow the slave plugin to request its own connection to the device. Let's just call it IConnectionSharer. If the slave plugin does not need to borrow this connection and has its own, then it should use its own implementation of IConnectionSharer to connect to the device. My "master" plugin (the one that owns the connection to the device) implements IConnectionSharer. It also exports this via ExportAttribute. My "slave" plugin assembly defines a class that also implements and exports IConnectionSharer. When the application loads, the intent is for my slave plugin, via MEF, to enumerate all IConnectionSharers and store them in an IEnumerable<IConnectionSharer>. It does so like this: [ImportMany] public IEnumerable<IConnectionSharer> AllSharedConnections { get; set; } But during part composition, I get the error the export 'Company.MasterPlugin (ContractName="IConnectionSharer")' is not assignable to type 'IConnectionSharer'. The error message itself seems clear enough -- it's as if MEF thinks my master plugin doesn't inherit from IConnectionSharer... but it does! Can anyone suggest further debugging strategies? I'm going to start the painful process of single stepping through the MEF source.

    Read the article

  • How to "pin" C++/CLI pointers

    - by Kumar
    I am wrapping up a class which reading a custom binary data file and makes the data available to a .net/c# class However a couple of lines down the code, i start getting the memory access violation error which i believe is due to the GC moving memory around, the class is managed Here's the code if ( ! reader.OpenFile(...) ) return ; foreach(string fieldName in fields) { int colIndex = reader.GetColIndex( fieldName ); int colType = reader.GetColType( colIndex ); // error is raised here on 2nd iteration } for ( int r = 0 ; r < reader.NumFields(); r++ ) { foreach(string fieldName in fields) { int colIndex = reader.GetColIndex( fieldName ); int colType = reader.GetColType( colIndex ); // error is raised here on 2nd iteration switch ( colType ) { case 0 : // INT processField( r, fieldName, reader.GetInt(r,colIndex) ); break ; .... } } } .... i've looked at interior_ptr, pin_ptr but they give an error c3160 cannot be in a managed class Any workaround ? BTW, this is my 1st C++ program in a very long time !

    Read the article

  • How to detect a Socket disconnection?

    - by AngryHacker
    I've implemented a task using the async Sockets pattern in Silverlight 3. I started with Michael Schwarz's implementation and built on top of that. So basically, my Silverlight app establishes a persistent socket connection to a device and then data flows both ways as necessary between the device and the Silverlight app. One thing I am struggling with is how to detect disconnection. I could think of 2 approaches: Keep-Alive. I know this can be done at the Sockets level, but I am not sure how to do this in an async model. How would the Socket class let me know there has been a disconnection. Manual keep alive. Basically, I am having the Silverlight app send a dummy packet every 20 seconds or so. If it fails, I'd assume disconnection. However, incredibly, SocketAsyncEventArgs.SocketError always reports success, even if I simply unplug the device that the Silverlight app is connected to. I am not sure whether this is a bug or what or perhaps I need to upgrade to SL4. Any ideas, direction or implementation would be appreciated.

    Read the article

  • C++ serial port send command

    - by Ilyssis
    Hi there, I have a hardware here, wich communicates over serial port. I use MS Visual C++ 2010, and I want to send a command: <-S-> I am doing this: SerialPort^ serialPort = gcnew SerialPort(portName , 9600, Parity::None, 8, StopBits::One); serialPort->Open(); serialPort->WriteLine("<-S->"); serialPort->Close(); But the command that goes out is <-S->., and not <-S-> (please notice the point that is attached to the outgoing command). I use Free Serial Port Monitor to watch my ingoing/outcoming data. So how can I get rid of that point in <-S->. ? This is what is going out: 3C 2D 53 2D 3E 0A = <-S-. This is what I want: 3C 2D 53 2D 3E = <-S- Thanks for help.

    Read the article

  • c# passing something from child form to parent

    - by Alan Bennett
    hi guys. so i have this form and on it is a combo box populated from a database via a SQL method. and i have another form which allows us to maintain the database table etc. so i make a new instance of the second form doing: Form1 frm = new Form2; frm.show(); once i have done what ever i wanted to do on the second form and i close it, i need to somehow trigger an event or something which will refresh the combo box and the code behind it. i was thinking of some onchange or focus event for the whole form, the problem is i have 5 of these combo boxes and running all the SQL again. i also thought of passing somesort of variable thro but then i would still need an event for that. any ideals would be awesome

    Read the article

  • VS2008 Link Error Using SafeInt3.hpp in 64bit mode.

    - by photo_tom
    I have the below code that links and runs fine in 32bit mode - #include "safeint3.hpp" typedef SafeInt<SIZE_T> SAFE_SIZE_T; SAFE_SIZE_T sizeOfCache; SAFE_SIZE_T _allocateAmt; Where safeint3.hpp is current version that can be found on Codeplex SafeInt. For those who are unaware of it, safeint is a template class that makes working with different integer types and sizes "safe". To quote channel 9 video on software - "it writes the code that you should". Which is my case. I have a class that is managing a large in-memory cache of objects (6gb) and I am very concerned about making sure that I don't have overflow/underflow issues on my pointers/sizes/other integer variables. In this use, it solves many problems. My problem is coming when moving from 32bit dev mode to 64bit production mode. When I build the app in this mode, I'm getting the following linker warnings - 1>cachecontrol.obj : warning LNK4006: "bool __cdecl IntrinsicMultiplyUint64(unsigned __int64 const &,unsigned __int64 const &,unsigned __int64 *)" (?IntrinsicMultiplyUint64@@YA_NAEB_K0PEA_K@Z) already defined in ImageInRamCache.obj; second definition ignored 1>cachecontrol.obj : warning LNK4006: "bool __cdecl IntrinsicMultiplyInt64(__int64 const &,__int64 const &,__int64 *)" (?IntrinsicMultiplyInt64@@YA_NAEB_J0PEA_J@Z) already defined in ImageInRamCache.obj; second definition ignored While I understand I can ignore the error, I would like either (a) prevent the warning from occurring or (b) make it disappear so that my QA department doesn't flag it as a problem. And after spending some time researching it, I cannot find a way to do either.

    Read the article

  • CustomError not working properly

    - by IrfanRaza
    Hello friends, I am using following setting for customError. < customErrors mode="On" defaultRedirect="GenericErrorPage.aspx" < error statusCode="403" redirect="NoAccess.aspx" / < error statusCode="404" redirect="FileNotFound.aspx" / < /customErrors I have a folder "Admin" having access to administrators role. When someone other than administrators tries to access the pages inside admin folder, it is redirected to login page. My expectation is to display "NoAccess.aspx". Whats wrong with this code? Or is there other meaning to statusCode=403. Could someone provide help on this. Thanks for sharing your valuable time.

    Read the article

  • Anyway to find out the current Windows is in lock mode?

    - by David.Chu.ca
    I have a windows application written in VS 2005. The application makes queries against to sql database in a timer cycle every 2 minutes. If there any data changes, the window will be refreshed with new data. If the user leaves the window, the windows will be automatically locked after a while. There is no sense to keep querying data in ever 2 minutes when the windows is locked; therefore I would like to stop the query when lock is on so that the network data trafic will be reduced and also saves the current windows resources such as memory and CPUs. I am not sure if there is any way to find out the current windows is locked? Not sure if there is any Windows APIs for this purpose if no .Net classes available? My project is in .Net 2.0 and all users are in Windows XP.

    Read the article

  • How to eliminate one of my extra DropDownLists in ASP.NET?

    - by salvationishere
    I'm developing a C#/SQL web app in VS 2008 but for some reason I have one extra DropDownList. The very first dropdownlist displaying is empty. Can you help me identify the cause of this behavior? I'm baffled! An excerpt of my code is below. private DropDownList[] newcol; // Add DropDownList Control to Placeholder private DropDownList[] CreateDropDownLists() { DropDownList[] dropDowns = new DropDownList[NumberOfControls]; for (int counter = 0; counter < NumberOfControls; counter++) { DropDownList ddl = new DropDownList(); SqlDataReader dr2 = ADONET_methods.DisplayTableColumns(targettable); ddl.ID = "DropDownListID" + counter.ToString(); int NumControls = targettable.Length; DataTable dt = new DataTable(); dt.Load(dr2); ddl.DataValueField = "COLUMN_NAME"; ddl.DataTextField = "COLUMN_NAME"; ddl.DataSource = dt; ddl.SelectedIndexChanged += new EventHandler(ddlList_SelectedIndexChanged); ddl.DataBind(); ddl.AutoPostBack = true; ddl.EnableViewState = true; //Preserves View State info on Postbacks //ddlList.Style["position"] = "absolute"; //ddl.Style["top"] = 80 + "px"; //ddl.Style["left"] = 0 + "px"; dr2.Close(); dropDowns[counter] = ddl; } return dropDowns; } protected void ddlList_SelectedIndexChanged(object sender, EventArgs e) { DropDownList ddl = (DropDownList)sender; string ID = ddl.ID; } //Create display panel private void CreateDisplayPanel() { btnSubmit.Style.Add("top", "auto"); btnSubmit.Style.Add("left", "auto"); btnSubmit.Style.Add("position", "absolute"); newcol = CreateDropDownLists(); for (int counter = 0; counter < NumberOfControls; counter++) { pnlDisplayData.Controls.Add(newcol[counter]); pnlDisplayData.Controls.Add(new LiteralControl("<br><br><br>")); pnlDisplayData.Visible = true; pnlDisplayData.FindControl(newcol[counter].ID); } }

    Read the article

  • VS 2010 Error “Object reference not set to an instance of an object” when adding Service Reference f

    - by Andy
    I have a VS2010 (RTM) solution which contains: WCF Service project Console WCF client project Class project for DataContracts and members Class project for some simple classes I successfully added a service reference in the console client project and ran the client. I then did a long dev cycle repeatedly modifying the service then updating console service reference. I then changed the namespace and assembly names for the projects as well as the .cs using references and app.config. I of course missed some things as it would not build so I eventually removed the project references and the service reference, cleaned and built successfully. I then attempted to add the service reference again, it discovered it but threw the “Object reference not set to an instance of an object” when OK'ing. Fix in answer below...

    Read the article

  • Can't get GetModuleFileNameA to work, keep getting error 'missing type specifier...'

    - by flavour404
    Hi, I am trying to use 'GetModuleFileNameA' but I keep getting the error 'c4430: missing type specifier - int assumed'. From reading the results from my google search I am guessing that it is from my use of NULL: char Filename[MAX_PATH]; //this is a char buffer GetModuleFileNameA(NULL, Filename, sizeof(Filename)); NULL is supposedly defined in #include stdio.h which I have included in my project, what am I doing wrong? Thanks.

    Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >