Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 261/1008 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Hardware compatibility on H97 chipset/hardware support

  - by user3238850

  I am aware that there is documentation about compatibility but it is way out dated. I am also aware that there is a hardware compatibility page on Ubuntu website, but that one is focused on the whole box rather than a single piece of hardware. I have some experience with Linux OS, and some experience playing Ubuntu Server in a virtual machine, but never worked on a machine that lives in the real internet. I am building a home server with an Intel H97 chipset motherboard. I have looked at several models and none of them has Linux in the supported OS category. I have the experience of installing Ubuntu Desktop 14.04 on my 4-years-old lap top, and except for some system errors on start up, there is not too much I can complain about, so I guess I should be fine. However, this time I am going to install Ubuntu Server 14.04 on a relatively new piece of hardware(I went to http://linux-drivers.org/ but found nothing really helpful). For example the ASUS motherboard has M.2 socket and Intel LAN I218V chip, the Gigabyte motherboard has two LAN chips(Intel LAN WGI217V and ATHEROS AR8161-BL3A-R). So I really want to make sure everything will work. Usually I would just trust Ubuntu and buy all hardware I need, but basing on my past experience with the Ubuntu Desktop version on my lap top, I am not so convinced. There is an easily noticeable difference: when the system is idle, the fan runs much more frequently and longer under Ubuntu. This leads to my suspicion that generally hardware will have worse support for Ubuntu, which is no surprising at all but enough for me to put this post here. And as far as I know, some Intel CPU features come with software that usually will not run under Linux. Any help, idea or thoughts would be greatly appreciated!

  Read the article

• Trouble upgrading from 12.04 to 14.04.1 lts

  - by Stanley Hlatshwayo

  After running these commands from the command line: sudo apt-get update sudo apt-get dist-upgrade sudo do-release-upgrade -d i get the following error message: W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/oneiric/main/source/Sources 404 Not Found , E:Some index files failed to download. They have been ignored, or old ones used instead. PLEASE HELP anyone. How can i fix this bug?

  Read the article

• LiveCD Boot/Install

  - by Jon

  I have recently built a new computer and have been looking to dual-boot alongside Windows. Trying to boot/install off Ubuntu/Dedora/Arch live CDs has failed across all distros and I keep getting the error: [34.5173939] ata9.00: exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.517403] ata9: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.517413] ata9.00: failed command: READ FPDMA QUEUED [34.517420] ata9.00: cmd 60/08:00:00:6d:70/00:00:74:00:00/40 tag 0 ncq 4096 in [34.517420] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.517433] ata9.00: status: { DRDY } [34.667134] ata10.00 exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.667134] ata10: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.667153] ata10.00: failed command: IDENTIFY PACKET DEVICE [34.667159] ata10.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [34.667160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.667170] ata10.00: status: { DRDY } I am using a new ASUS Z77 Sabertooth motherboard with a Seagate Barracuda ST1000DM003 1TB 7200RPM hard drive. I am not entirely sure why I can't even boot off the live CD? Any ideas? Hi thanks for the quick response. All Distros were direct download from their respective websites, I have tried both CD boot with all distros and USB boot with Arch only. I have just updated my BIOS as well an am still receiving the same error. The fact that it happens on CD and USB tell's me it's not an optical drive issue. All information I can find on this seems to relate to hard drives failing on already installed linux boxes or faulty SATA cables. I am a bit confused why this issue would be preventing a CD/USB boot though. Is there any more info I can provide that might help uncover the source of the problem? Cheers, Jon

  Read the article

• Wont boot from USB, stops at SYSLINUX copyright

  - by Steve

  Created bootable 11.10 in Windows from Universal USB Installer 1.8.6.8, upon boot in my HP Mini Netbook it displays only this: SYSLINUX 4.04 EDD 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al _(Blinky Cursor) I tried removing "ui" from syslinux.cfg, no change... (Re: can't install with usb pen drive, SYSLINUX problem) I also tried creating a bootable USB using unetbootin-windows-563, no change. Does anybody have any other ideas?

  Read the article

• Installing Ubuntu Desktop on usb stick

  - by Tobias Gårdner

  trying to install Ubuntu Desktop on a USB stick but I do not succeed. First time I tried, the USB stick contained an installation of USB server and I wanted to start over again. However, it complained about partioning. Removed all the partitions from the stick and tried again, hoping that the installer would help me out with partioning... But now the USB stick did not show up at all... Created one partion NTFS on the USB stick and tried again but the only "automated" alternative I get for installing is to overwrite or add Ubuntu to my HDD which already contains Windows, something that I do not want... Do I need to manually create partions on the stick in the installer? Which partitions should I create? The USB stick is 8GB and the machine that I will test it on has 8GB memory. Helpful for any support here. Regards, Tobbe G

  Read the article

• update manager is not woring Failed to download repository information

  - by harry

  My update manager is not working and showing this message Failed to download repository information Check your Internet connection. W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found , W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found , E:Some index files failed to download. They have been ignored, or old ones used instead. Pleas help Thank you for your time.

  Read the article

• Why ubuntu does not use the kernels installed by automatic update?

  - by Guillaume Coté

  I used the script describe in this question to list the kernel installed on the computer : How do I to remove or hide old kernel versions, to clean up the boot menu? In the 3.2.0, I have 33, 34, 35, 36, 37, 38, 39, 41, 43, 44, 45 and 48. I would expect to be running 3.2.0-48 after a reboot, but I am still running 3.2.0-32. Why the kernels installed by auto update are not used? [I am running 12.04 LTS] /boot/grub/menu.lst was modified for the last time June 16 2013, it contains 3.2.0-32-generic 2.6.32-45-generic 2.6.32-44-generic 2.6.32-43-generic A recovery for each of those and a memtest. I would have expected the kernel between 3.2.0-33 to 3.2.0-48 to be in this file before 3.2.0-32.

  Read the article

• Unable to select iso file when making live usb with Yumi multi boot installer

  - by user169875

  I am trying to make a Live USB of ubuntu 12.04 desktop. I did download it from the site. It shows that its a iso file. I am trying to browse it from multiboot installer(YUMI) but I don't know why Multiboot Installer is unable to detect it as it is a iso file. I tried renaming the file .iso. but nothing worked for me. Please help me I am stuck and frustrated. Trying to get things straight for hours.

  Read the article

• How to prevent ubuntu from connecting to wifi hotspots automatically

  - by calvin tiger

  Note: this question is distinct from "How to disable automatically connecting to WiFi?", as I do not wish to disable automatic WiFi connection in general. Problem: The Ubuntu WiFi module connects automatically in priority with WiFi networks without a password, even if there is a already known password-protected WiFi network nearby. Worse, most of the times these "unprotected" networks are in fact hotspots that require authentification from the browser. Example: I am at home, and most of the times my Ubuntu laptop will connect by itself to a nearby hotspot instead of choosing my local ADSL box (password-protected, with a password that is already known by the computer). I then have to select my own WiFi network manually. Is there a way to disable automatic connection to /all/ hotspots ?

  Read the article

• How to restore curropted installation?

  - by nightweels

  I have a laptop with dead battery that when there is no current connected to it turns critical so fast and in the energy management in ubuntu, when the battery is critical, there are 2 options: shutdown and hibernate witch is in grey (unclickable), so I have no choice but to chose immediate shutdown, there is no standby even if it is an option in the screen behavior. An immediate shutdown (and I mean by immediate the one that we use when we ended using the computer) happened while I was installing a program called quickly, so after the power was restored, I tried to reinstall the program then I get this translated message: An untreatable error occurred: It seems there is a software error in aptdaemon, the program that lets you install and remove software and any other task related to package management. details: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 968, in simulate trans.unauthenticated = self._simulate_helper(trans) File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the libpng12-dev package. This might mean you need to manually fix this package.

  Read the article

• Good text editor for Ruby on Rails programming?

  - by Andrew

  I'm trying to find a text editor that I can use for doing Ruby on Rails development. I have been using TextMate on my Mac and would love to find something that even comes close to that experience. My Ubuntu laptop is a little old, and doesn't have a lot of memory, so I need something lightweight. I don't need/want a bloated IDE because the performance on my slow laptop would be terrible. It would be nice if this text editor had: Syntax highlighting A project/file browser view to be able to open files in my project Keyboard shortcuts (don't need them as much)

  Read the article

• Installing chrome gives an error: "dependency is not satisfiable"

  - by Sled

  I just installed ubuntu on my laptop, everything works fine, but I'd like to use chrome instead of firefox. I downloaded the .deb file from the chrome website, and when I open it, the install buton inside the software center is inactive (I can't click it) and it's telling me dependency is not satisfiable: libcurl3 I did a search for libcurl3 in the Software Center, the three results I'm getting are already installed. Any ideas how to fix this? I also tried installing chromium-browser, but that's not working out neither. I'm getting Package dependencies not resolved and this details block: The following packages have unmet dependencies: chromium-browser: Depends: libgcc1 (>= 1:4.1.1) but 1:4.5.2-8ubuntu4 is to be installed Depends: libxdamage1 (>= 1:1.1) but 1:1.1.3-1ubuntu1 is to be installed Depends: zlib1g (>= 1:1.2.3.3.dfsg) but 1:1.2.3.4.dfsg-3ubuntu3 is to be installed Depends: libnss3-1d (>= 3.12.3) but it is not going to be installed

  Read the article

• ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

  - by Bence Mihalka

  When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

  Read the article

• Taking advantage of an "Intel Turbo Memory" card for swap or fast bootup

  - by Brian Ballsun-Stanton

  I have an X61 thinkpad (currently running 10.10) that I purchased 3 years ago. I splurged a little and got a Turbo Memory expansion to improve my windows boots. When I installed 10.04 (and subsquently upgraded to 10.10) there was no Turbo Memory support and there's an awful lot of noise on searches. 1) Is there any support for Intel Turbo Memory in 11.04 or trivially compilable into the kernel as swap, suspend, hibernate point, or boot partition? 2) If there is, should I bother trying to use it?

  Read the article

• Ubuntu 12.04 suddenly will not boot after compiz crash on lockscreen

  - by schonjones

  Yesterday i went to work and closed my laptop. When i got home I couldn't get the lock screen to come back up. ctrl+alt+f2 to get to a terminal and Tried to kill compiz, compiz was not running so I tried to restart it got an error opening the display so i tried to restart lightdm again couldn't open display. so I restarted and now I am stuck on the loading screen. I tried booting in recovery mode and all options hang except root, but i'm stuck with read only. booting from a live cd I can mount the drive but again stuck with read only. I'm completely stuck here. checking my default-display-manager returns "/usr/sbin/elsa" as the only line and can't edit it. I've got an 11.10 live cd and my /home is encrypted so i can't try to back anything up at the moment either. How can i resolve this or at the least back up some of my data? Please help!

  Read the article

• Why do my gvfs mounts not show up under ~/.gvfs?

  - by kynan

  From what I read, when mounting a network share via nautilus or gvfs-mount the mount point should be in ~/.gvfs. This seems not to be the case for me: I tried mounting both an FTP and SMB share via both nautilus and gvfs-mount under both Ubuntu Maverick and Natty and in none of the cases did I see any mount point under ~/.gvfs. I can access the shares just find in nautilus, but I want to have access via the command line, which is why I need a mount point in the file system. Edit: Debugging following James Henstridge's answer and enzotib's comment revealed that on my laptop gvfs-fuse-daemon is running and consequently gvfs mounts show up in ~/.gvfs, whereas on the 2 workstations where ~/.gvfs remained empty gvfs-fuse-daemon was not running. On all 3 machines there are other gvfs processes running: gvfsd, gvfs-afc-volume-monitor, ... On the laptop, mount | fgrep gvfs yields gvfs-fuse-daemon on /home/xxx/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=xxx) That raises the questions: How are shares mounted without gvfs-fuse-daemon running? Is there no mount point created in that case and is every access to the share a gvfs library call? Which daemon is responsible? gvfsd? What's the role of gvfs-fuse-daemon? Does it only create a fuse mount point in ~/.gvfs?

  Read the article

• How to create a deb package that installs a series of files

  - by fossfreedom

  I would like to create a brand new deb package to install series of files. If at all possible, I would like to untar the folder containing these files as part of the installation into a known folder location. Failing that, some knowledge how to package the source folders and files would be very useful. Question is - is this possible and if so - how? Lets give an example: ~/mypluginfolder/ contains the files x, y, a subfolder called abc and inside that another file called z. I want to tar this folder: tar -cvf myfiles.tar ~/mypluginfolder I presume my debian package would look like myfiles.tar.gz myfiles+ppafoss_0.1-1/ myfiles.tar DEBIAN changelog, compat, control, install, rules source Is it possible to somehow untar myfiles.tar to a known folder location for example /usr/share/rhythmbox/plugins/ Thus the final result would be: /usr/share/rhythmbox/plugins/mypluginfolder /usr/share/rhythmbox/plugins/mypluginfolder\x /usr/share/rhythmbox/plugins/mypluginfolder\y /usr/share/rhythmbox/plugins/mypluginfolder\abc\z If - presuming launchpad needs source, advice is sought as to where I should drop the source folders and files into the deb package structure. This will eventually will become a series of individual launchpad PPA packages. What I prefer (but may not be able to achieve...) is to keep my packaging to a minimum - create a series of packages from a template and adjust the bare minimum (changelog etc + the tar file/file & folder structure).

  Read the article

• How can I download Youtube videos?

  - by Abhijit Navale

  First i tried with youtube-dl and all the times ( and all days) for all videos it gives this same error: youtube-dl http://www.youtube.com/watch?v=6zWwTTAc7O8 [youtube] Setting language [youtube] 6zWwTTAc7O8: Downloading video info webpage [youtube] 6zWwTTAc7O8: Extracting video information ERROR: format not available for video Then I tried minitube latest version. but it just cant open the video. it just keeps trying to open video. it is unable to even play or download any video. Also in old days, whenever i play video in youtube.com that was automatically was saved in my /tmp. But that is also not happening these days. What can I use for downloading Youtube videos? I am using Lucid 64 bit.

  Read the article

• Can't untar Testdisk 6.14 using live CD

  - by Orestes

  I'm using an Ubuntu LiveCD right now and need to recover files from a (Windows 7) partition. I've read about TestDisk and tried downloading it and untaring it but: testdisk-6.14-WIP.linux26.tar.bz2: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now I don't know why it doesn't work (noob). I tried using sudo apt-get install testdisk but: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package testdisk so.... HELP :D

  Read the article

• Folder missing in external hard drive

  - by Hans

  I have been backing up my folders, I am using Seagate Expansion portable Drive. I had created a folder called "|o|o" in the root folder of the portable drive... I copied my latest folders into "|o|o" folder to re-install ubuntu. When I open the portable drive the folder |o|o is not visible, when I ctrl+a and check properties the space used is 122GB, however when I click on the drive to view properties of the drive used space is 260GB. It looks as if the folder is there in the portable drive but I cannot access it... I have tried to view all the hidden files and "|o|o" is still not there. I am using 12.04.Can you please help me to retrieve this folder.

  Read the article

• Setting up a mail server to send mail from IP

  - by Manishearth

  I have a fixed LAN IP, but no domain name. I'd like to be able to send emails within the LAN, and receive mails sent to my IP (user needs to send an email to [email protected]). I've tried the stuff in this post -- the "easy" one gives me an IMAP error in squirrelmail (IMAP is open and listening, but not working), and the "hard" one seems to be outdated. Is it possible to set up an email server (preferably on 12.04) without having a domain name?

  Read the article

• juicy couture sale would nanytime go for any added casting

  - by user109129

  Depaccident aloft the achievement and the air-conditionedior of getting, you can admissionment the acclimateed acadding ambiencel as per your acquiesceadeptness.juicy couture online are a allotment of the castings which admission admissiond a abounding birthmark over a acceptder aeon of time. The air-conditionedior and complete acclimated for their achievement is up to the mark and has no angleer. The a lot of attractionive activity of JC purses are their acumascribe aggregates, which achieves them admired by beastlys beacceptding to all apishes. These are simple to be admissionmentd from onbandage retail aliment. You admission the advantage to appraisement the admissionanceible adjustment on internet and aalpha buy the acadding of your best thacrid the acafabuttingation calendar. It would be admissionable to achieve a fizz all-overs at the accession aggregate beanvanced accurate the transactivity, in acclimatizement to conabutting the accurateation of declared broker.Alacquireing, tachievement are so aapprenticeding advantages in the exchange that it has in fact beappear difficult to achieve the acclimateed best, but if you alattainable admissionment juicy couture sale, you would nanytime go for any added casting. Their beside attaccident with adjustment of blooms is the best activitys which a exhausted woman may annual for. The bandage of these tots is in fact able, and they do not aperture out even afterwardss acrid and added acquireing.acclimateed admeaconstantments of Juicy couture battleaccoutrements achieve them applicative to accouterment arbitrary admeaconstantment requirements. Some woman like huge accoutrements while addeds like acclimatized admeaconstantmentd tots. In any case, the cobasicotmentments of these purses are bottomless and admission the acclimateation to acclimatize sanytimeal sbasic activitys. The admirable and dejected bloom abuttals is anadded complete aspect of JC getting. acquire the acclimateed ones for you accordanceing to the accumulating of your accoutermentss, and leave a ambrosial afterwardseffect on addeds. abonfire and acclimateed contrasts are in trend nowacanicule, so accrue yourself up to date by purchasing this air-conditionedb accumulating from Juicy Couture.

  Read the article

• gsm-ussd gives device busy or error (100)

  - by mydoghasworms

  I am using gsm-ussd to try and query my data balance from my 3G modem. When I issue the commands gsm-ussd -m /dev/ttyUSB0 '*188#' or gsm-ussd -m /dev/ttyUSB2 '*188#' I get either "Device or resource busy" (when it is in used and connected) or "Unknown error (100)". My device (Huawei E173) seems to create 3 devices in /dev, namely ttyUSB0, ttyUSB1 and ttyUSB2. None of them work, and ttyUSB1 gives a somewhat different problem, as it just give the following message: * Wrong modem device (use -m <dev>)? * Modem broken (no reaction to AT)

  Read the article

• Default file permissions for php user www-data

  - by John Isaacks

  I have a php installed on my ubuntu machine. The web root is /var/www I set the permissions for this folder like so: sudo chown -R ftpuser:www-data /var/www ftpuser is the user I set up so I can ftp to /var/www from another machine on the network. www-data is the user php uses. I double checked using whoami from php. Whenever I ftp upload a new file to the machine the group has no permissions to the file. So when I try to access it in my browser via machine-name/new-file.php I am told permission denied and I have to go and chmod the new file. I am wondering if there is a way I can default the www-data user/group to have access permissions to new files so I don't have to keep chmod every new file?

  Read the article

• Ubuntu installer doesn't see internal hard drive on DELL Vostro 3360

  - by valk

  I just received a new DELL Vostro 3360, it has Windows 7 preinstalled. When it comes to the partition window I can't see the hard drive there. I see only /dev/sda or /dev/sdb (either one and in both cases it's a usb drive from which I'm installing). I tried every imaginable BIOS configuration. Tried to change the SATA mode to ATA, DHCI and more. EDIT: I tried to install with standard Ubuntu 12.04 32 bit, and 11.10 64 bit official versions. No luck. I'll appreciate any suggestion.

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >