Search Results

Search found 8380 results on 336 pages for 'manage py'.

Page 262/336 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• Managing disk in a VM

  - by dst

  I'm replacing my two old rack servers with a new one that has plenty of power to take over the functionality my current servers. The server is a 4U rack mount with 16 3.5" SAS drive bays, two 2.5" bays, a Xeon E3-1230v2 CPU and 32GB of ECC RAM. My issue is the following. I would like to have a FreeBSD file server with ZFS managing disks. However, I need other VMs for e.g. a shell/git server, mail server etc. I'm wondering how to deal with the following issues: I want ZFS to fully manage the disks, so I'm not using any hardware RAID. Should I pass the SAS controller directly to the FreeBSD system as passthrough PCI? I want to maximize the reliability of the setup. On what disks should I install the hypervsor and keep server system disks? For (2) I have the option of having a RAID setup on the SAS controller and using that as system disk to store the hypervisor as well as VM images. However, this makes PCI passthrough to the file server impossible. Another option is using the two 2.5" bays. In terms of reliability how are SSDs compared to e.g. WD RE4 disks? Would it make sense to have two SSDs in software RAID as boot disks for the hypervisor or should I just go with e.g. WD RE4 disks in a software RAID setup. I also need to think about where to store the mails for the mail server, but this could be done over NFS between the VMs. BTW, this is for home use, so the load is not really that big. What I'm looking for is best practices for splitting up a server.

  Read the article

• AD domain on web servers behind NAT - DNS issues?

  - by Ant

  I'm trying to setup an AD domain to manage the security between two Windows Server 2008 webservers that will sooner or later use NLB to balance website requests. I've hit a problem which I think is a simple solution and is down to DNS. My website domain is mydomain.com. The two servers are running behind a NAT firewall on the 10.0.0.0 IP range. I've setup the AD domain to be called ad.mydomain.com (as recommended by MS and a few other answers to questions on here). The second web server however doesn't want to join the domain, and gives an error pinning the problem on DNS - "ensure that the domain name is typed correctly" even though it queries the SRV record successfully and gets the correct DC back - dc.ad.mydomain.com. Doing a dcdiag /test:dns on the DC gives the Delegation error 'DNS Server dc.mydomain.com Missing glue A record'. I have a feeling I need to add something to the public DNS so that it in some way knows about ad.mydomain.com. Can anyone suggest whether I'm on the right track in adding something to the public DNS? Or whether it's something else? Many thanks

  Read the article

• Creating an ec2 image on amazon fails at mkfs.ext3

  - by Dave Orr

  I'm trying to create an image of my ec2 instance in Amazon's cloud. It's been a bit of an adventure so far. I did manage to install Amazon's ec2-api-tools, which was harder than it seemed like it should have been. Then I ran: ec2-bundle-vol -d /mnt -k pk-{key}.pem -c cert-{cert}.pem -u {uid} -s 1536 Which returned: Copying / into the image file /mnt/image... Excluding: /sys/kernel/debug /sys/kernel/security /sys /proc /dev/pts /dev /dev /media /mnt /proc /sys /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/z25_persistent-net.rules /mnt/image /mnt/img-mnt 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00677357 s, 155 MB/s mkfs.ext3: option requires an argument -- 'L' Usage: mkfs.ext3 [-c|-l filename] [-b block-size] [-f fragment-size] [-i bytes-per-inode] [-I inode-size] [-J journal-options] [-G meta group size] [-N number-of-inodes] [-m reserved-blocks-percentage] [-o creator-os] [-g blocks-per-group] [-L volume-label] [-M last-mounted-directory] [-O feature[,...]] [-r fs-revision] [-E extended-option[,...]] [-T fs-type] [-U UUID] [-jnqvFKSV] device [blocks-count] ERROR: execution failed: "mkfs.ext3 -F /mnt/image -U 1c001580-9118-4a50-9a25-dcf02be6d25f -L " So mkfs.ext3 wants -L, which is a volume name. But ec2-bundle-vol doesn't seem to take in a volume name as an argument, and the docs (http://docs.amazonwebservices.com/AmazonEC2/gsg/2006-06-26/creating-an-image.html) don't seem to think one should be needed. Certainly their sample command: # ec2-bundle-vol -d /mnt -k ~root/pk-HKZYKTAIG2ECMXYIBH3HXV4ZBZQ55CLO.pem -u 495219933132 -s 1536 doesn't specify anything. So... any help? What am I missing?

  Read the article

• Kickstart: Serve dynamic kickstart images via a CGI or PHP script?

  - by Stefan Lasiewski

  I'd like to kickstart a couple dozen RHEL6/SL6 servers. However, some of these servers are different and I don't want to create a new ks.cfg file for each class of server. Are there any products which can generate a Kickstart file dynamically on the fly, from a template? For example, if I append a line like this to the KERNEL: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi Then the script ks.cgi can determine what host this is (Via the MAC address), and print out Kickstart options which are appropriate for that host. I could optionally override some options by passing parameters to the script, like this: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi?NODETYPE=production&IP=192.168.2.80 After we kickstart the server, we activate Cfengine/Puppet on this system and manage the system using our favorite Configuration Management product. We're experimenting with xCAT but it is proving too cumbersome. I've looked into Cobbler, but I'm not sure it does this. Update: A roll-your-own solution is discussed in the O'Reilly book: Managing RPM-Based Systems with Kickstart and Yum, Chapter 3. Customizing Your Kickstart Install Dynamic ks.cfg, which echos some of the comments in this thread: To implement such a tool is beyond the scope of this Short Cut, but I can walk through the high-level design. Any such solution would mix a data store (the things that change) with a templating solution (the things that don’t change). The data store would hold the per-machine data, such as the IP address and hostname. You would also need a unique identifier, perhaps the hostname, such that you could pick up a given machine’s data. The data store could be a flat file, XML data, or a relational database such as PostgreSQL or MySQL. In turn, to invoke the system, you pass a machine’s unique identifier as a URL parameter. For example: boot: linux ks=http://your.kickstart.server/gen_config?host-server25 In this example, the CGI (or servlet, or whatever) generates a ks.cfg for the machine server25. But where, oh where, is the code for ks.cgi?

  Read the article

• Want to use something like Citrix XenDesktop, Free Alternative?

  - by Chris

  I'm looking to go into IT, general office server management, and it looks like XenDesktop would be a awesome tool to use. If I get it right, you would store a central image of the OS you want to deploy (in an iso file) on the main server. Then use XenDesktop to pull that image down to the client, and it will then boot the OS inside of the virtual machine. Does it download the image of the OS and store it locally (like cloning the VM onto the client?) I'd love to find a free (possibly open source?) alternative to this, I keep on hearing about KVM in Linux and PXE booting a minimalistic OS to use remote KVMs.... Would that be what I'm looking for? Ideally, I'd like a system.. - That allows me to manage one central image for multiple clients (virtualized hardware) - Easily boot a thin client OS that connected to XenDesktop. Would those things be possible with some kind of free alternative? Some guidance would be greatly appreciated.

  Read the article

• Can I get all active directory passwords in clear text using reversible encryption?

  - by christian123

  EDIT: Can anybody actually answer the question? Thanks, I don't need no audit trail, I WILL know all the passwords and users can't change them and I will continue to do so. This is not for hacking! We recently migrated away from a old and rusty Linux/Samba domain to an active directory. We had a custom little interface to manage accounts there. It always stored the passwords of all users and all service accounts in cleartext in a secure location (Of course, many of you will certainly not think of this a being secure, but without real exploits nobody could read that) and disabled password changing on the samba domain controller. In addition, no user can ever select his own passwords, we create them using pwgen. We don't change them every 40 days or so, but only every 2 years to reward employees for really learning them and NOT writing them down. We need the passwords to e.g. go into user accounts and modify settings that are too complicated for group policies or to help users. These might certainly be controversial policies, but I want to continue them on AD. Now I save new accounts and their PWGEN-generated (pwgen creates nice sounding random words with nice amounts of vowels, consonants and numbers) manually into the old text-file that the old scripts used to maintain automatically. How can I get this functionality back in AD? I see that there is "reversible encryption" in AD accounts, probably for challenge response authentication systems that need the cleartext password stored on the server. Is there a script that displays all these passwords? That would be great. (Again: I trust my DC not to be compromised.) Or can I have a plugin into AD users&computers that gets a notification of every new password and stores it into a file? On clients that is possible with GINA-dlls, they can get notified about passwords and get the cleartext.

  Read the article

• How do I secure Sql Server 2008 R2

  - by Mark Tait

  I have both a dedicated and a VPS (from Fasthosts) virtual server - the web sites/applications I run on these, access Sql Server stored on the same web server. Until now, I have logged onto Sql Server on both the deidicated and VPS server, from Sql Server Management Studio - until I noticed in my server application logs, multiple attempts to logon to Sql Server using the 'sa' username, but failed password. So someone/bot is trying hard (repeatedly every couple of hours, for approx 20 attempts during each instance) to log on... so obviously I have to lock down access to Sql Sever remotely. What I have done is gone into Configuration Manager, and in Sql Server Network Configuration - Protocols for Sql2008 and also in Sql Native Client 10.0 Configuration - Client Protocols - I have diabled Named Pipes, TCP/IP (and VIA by default). I have left Shared Memory enabled. I also disabled in Sql Server Services, the Sql Server Browser. Now the only way I can manage the databases on these servers, is by logging on to them via Remote Desktop. Can anyone confirm if this is the correct way of stopping anyone maliciously logging on to Sql Server? (I'm not a DBA or security expert - and there are hundreds of articles advising all different ways - but I was hoping for the experts here to confirm, or otherwise, if what I've done is correct) Thank you, Mark

  Read the article

• Using WebDAV for automated downloads

  - by Geo Ego

  I currently manage a number of sites (at one point about a dozen, currently four, but soon growing into the dozens or hundreds) that serve a piece of software to clients at their remote locations. Our web server is Windows SBS Server 2k3, and the remote servers are Windows Server 2k3.When we have new versions of the software, I upload this new software to a specific directory and rename it; each time the clients boot, they pull their software from that specific directory. With just a few sites, it's no problem for me to RDP in and copy the files over. As the number grows, this will quickly become quite unwieldy. So I'm thinking that WebDAV would be part of a solution, so that I could simply push the newest version to our server (Windows SBS Server 2003) and make it available to the sites to grab. However, on the remote server side, what are some suggestions for automating the download? I only want the servers to download the files during downtime (between 3 AM and 9 AM), and I only want them to download if there is a new version available. I had thought of writing a program that checked the files on the WebDAV server at a regular interval, compared a hash of the current software to a hash of the software on the server, and only downloaded if they were different, but I'm wondering if there is something I am unaware of that can automate the process.

  Read the article

• Centos Server/MySQL server problem

  - by Jake

  Hello all, I currently run a website we get about 15,000-20,000 hits a day. We currently run a very active forum, that is hosted using Vbulletin software. We have 4.5 Million Posts, 80,000 Threads, with about 11,000 members of which just under a third is active all the time. Now I am running a Intel Xeon Quad Core (2.13Ghz) with 4GB of RAM, Centos 5.5 and running DirectAdmin on the box to manage it. I also run the current stable version of Apache, MySQL, and php. This is the only site that is hosted on this machine. Now during random times of day sometimes when it gets busy the server load can get to like 20, but this can also happen when we only have like 200 users active too. I dont understand what is causing these problems. Sometimes I get pages that can generate in .2 seconds other times it takes like 5-8 seconds. I have customized the my.cnf file and that has not helped out anything, I didnt know where else to turn so if anyone has any suggestions please let me know. Thank You In advance.

  Read the article

• Are my iptables secure?

  - by Patricia

  I have this in my rc.local on my new Ubuntu server: iptables -F iptables -A INPUT -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 9418 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 9418 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 5000 -m state --state NEW,ESTABLISHED -j ACCEPT # Heroku iptables -A INPUT -i eth0 -p tcp --sport 5000 -m state --state ESTABLISHED -j ACCEPT # Heroku iptables -A INPUT -p udp -s 74.207.242.5/32 --source-port 53 -d 0/0 --destination-port 1024:65535 -j ACCEPT iptables -A INPUT -p udp -s 74.207.241.5/32 --source-port 53 -d 0/0 --destination-port 1024:65535 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT iptables -P INPUT DROP iptables -P FORWARD DROP 9418 is Git's port. 5000 is a port used to manage Heroku apps. And 74.207.242.5 and 74.207.241.5 are our DNS servers. Do you think that this is secure? Can you see any holes here? Update: Why is it important to block OUTPUT? This machine will be used only by me.

  Read the article

• Making one of the folders default in Apache

  - by OmerO

  Hello, The file & directory structure of my website is as follows: /Library/WebServer/mysite/joomla .. /Library/WebServer/mysite/wiki .. /Library/WebServer/mysite/forum .. /Library/WebServer/mysite/index.php As you see, there are various applications each residing in separate folders. Now, in order to define this structure, I have made this entry in Apache http-vhosts.config file: ServerName mysite.com DocumentRoot "/Library/WebServer/mysite" ** And I already have the DirectoryIndex defined: DirectoryIndex index.html index.php, and so on. So far so good but I want this specific functionality: When someone visits mysite, he/she should automatically directed to: /Library/WebServer/mysite/joomla (and therefore /Library/WebServer/mysite/joomla/index.php) I don't want to achieve that functionality by putting a redirection code inside /Library/WebServer/mysite/index.php or /Library/WebServer/mysite/index.htm because that causes time delays (because of the redirection, of course) But in this case, the only proper way of achieving it seems to set DocumentRoot this way: DocumentRoot "/Library/WebServer/mysite/joomla" But when I set it that way, then the other folders (/wiki, /forum, etc.) are simply not served by Apache. To work around it, I put directives like: Alias /wiki /Library/WebServer/mysite/wiki .. Alias /forum /library/WebServer/mysite/forum and it did work actually the way I wanted. But... I still cannot use it that way because in this case I just couldn't manage to make the wiki use Short URLs (as described in link text) So, I have to set the DocumentRoot back to /Library/WebServer/mysite and shoud be able to assign /Library/WebServer/mysite/joomla as the "default directory" (my own terminology :) Can I do it in Apache? Is there any other way you might suggest? Thanks.

  Read the article

• What are the steps needed to set up and use security for AWS command line tools?

  - by chris

  I've been trying to set up the AWS command-line tools following Eric's most useful guide at http://alestic.com/2012/09/aws-command-line-tools. I can't seem to find a good how-to for how to generate the x509 certificate and private key, and how that relates to the various security files the guide creates. Update: I have found a couple of links that describe the some steps. These steps seem to work, however I'm not sure if this is secure & the best way to do it: 1) Create a private key openssl genrsa -out my-private-key.pem 2048 2) Create x.509 cert openssl req -new -x509 -key my-private-key.pem -out my-x509-cert.pem -days 365 Hit enter to accept all of the defaults. Then, from the IAM Dashboard, User, select a user & click on the "Security Credentials" tab. Click on "Manage Signing Certificates", then "Upload Signing Certificate", paste in the contents of my-x509-cert.pem, click OK and it should be accepted. One step that is discussed, but not required for me, was the addition and subsequent removal of a pass phrase on the private key. Should I have been prompted for one, and is my cert potentially unsafe because of this?

  Read the article

• Can many addon domains slow down cPanel or create problems?

  - by Marco Demaio

  I actually resell hosting plans by using one single cPanel account and many addon domains under it. Basically for each new user I don't create a new cP account, but I simply create a new ADDON domain and give him the necessary space. I know in this way the final user won't be able to manage his emails and he want be able to access all cPanel features, but that's ok. My only question is: "is there a limit on the number of cPanel addon domain that can be added?". I know in my account I'm allowed to add unlimited addon domains, but is there something that might happen that slows down cPanel or could create problems? I mean is there any suggestions you could give me about the way i'm using cPanel which might not be the usual way of using it. (As for instance: "be aware that Awstast could run very slow or crash", or "be aware that mails from different addon domains under the same cp account could create many problems.", etc.) Many thanks!

  Read the article

• .NET 2.0 Application now running slow on IIS 7.5

  - by Valien

  I recently moved (and still in testing) an application from a Windows 2003 Server (Physical box) running IIS 6.x to a Windows 2008 R2 Standard (VM) IIS 7.5 server. The application is a .NET framework 2.0 application and is running under a 2.0 App Pool. This site works great except for one thing: Takes forever to get a request back. I've been tracking it with Chrome Inspect Element and it queries the site and can take up to 45 seconds to answer. Now when it does the page(s) render instantly but it's that initial request that's killing it. I see no error logs or issues with the application or Windows Event Viewer or even IIS logs so not sure where to start looking next. Some new changes was that previously the app resided behind a Pix firewall and now is behind a larger network environment in a DMZ zone (and I believe NetScaler is also being used to manage the network). I do not have rights/abilities to look at the network itself but can contact the Data center folks to look deeper into this but I wanted to make sure it's not my application that might be causing the slowdown or IIS. In summary: .NET 2.0 application works great in IIS 6.x Application moved to an IIS 7.5 server and now slow on rendering but when it does render responds back with pages instantly. Edit for solution Found out that it was the SOAP calls that were slowing the site down. In the new datacenter my application cannot request SOAP calls and so they time out after 40-45 seconds or so. Now trying to find out if I can install a proxy server to redirect this...

  Read the article

• Migrate users from one Active Directory domain to another?

  - by Matt

  I work for a company that hosts desktops for a number of different companies. At the moment, all the clients access a single domain controller called HOSTING. Under that are groups for each company. Each of the hosting servers exist on the same network and so are therefore potentially browseable by other terminal servers. This has raised some security issues and I've found it a little tricky to manage the security. As well, it's possible to see who the other hosted companies are even though other users cannot see their data. What I'd like to do is isolate each clients terminal server/s into their own VLAN. In addition, I'm thinking that each TS would have it's own DC which could just run on the TS for that company. Overhead for a DC is fairly minimal. This would isolate users on that TS from seeing the other companies completely. Firstly, does this sound like a sensible plan? Second... if it is sensible, how would I go about pulling the accounts from the HOSTING domain to a new domain? ideally, without the need for users to change their passwords?

  Read the article

• Diagnosing Logon Audit Failure event log entries

  - by Scott Mitchell

  I help a client manage a website that is run on a dedicated web server at a hosting company. Recently, we noticed that over the last two weeks there have been tens of thousands of Audit Failure entries in the Security Event Log with Task Category of Logon - these have been coming in about every two seconds, but interesting stopped altogether as of two days ago. In general, the event description looks like the following: An account failed to log on. Subject: Security ID: SYSTEM Account Name: ...The Hosting Account... Account Domain: ...The Domain... Logon ID: 0x3e7 Logon Type: 10 Account For Which Logon Failed: Security ID: NULL SID Account Name: david Account Domain: ...The Domain... Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x154c Caller Process Name: C:\Windows\System32\winlogon.exe Network Information: Workstation Name: ...The Domain... Source Network Address: 173.231.24.18 Source Port: 1605 The value in the Account Name field differs. Above you see "david" but there are ones with "john", "console", "sys", and even ones like "support83423" and whatnot. The Logon Type field indicates that the logon attempt was a remote interactive attempt via Terminal Services or Remote Desktop. My presumption is that these are some brute force attacks attempting to guess username/password combinations in order to log into our dedicated server. Are these presumptions correct? Are these types of attacks pretty common? Is there a way to help stop these types of attacks? We need to be able to access the desktop via Remote Desktop so simply turning off that service is not feasible. Thanks

  Read the article

• split virtualization design based on environment or server role?

  - by Dan

  I'm setting up the server environment for a new software development group, which will include 4 test environments. These are web applications, so each environment will have an application server and a database server. I'm planning on buying two physical servers (e.g. 6-core CPU each with 12GB or so of RAM), and I'm thinking virtualization is appropriate here. With that in mind, I've thought of a couple ways that I could organize the virtualization strategy: - Separated by server role: Server 1 has all the application servers, each in their own guest VM. Server 2 has all the databases. OR - Separated by environment: Server 1 has a VM for two of the environments, with the VM containing both the app server and the database server. Server 2 would also contain two test environments, with the same style (app server and database in same VM). The advantages I see with all the app servers on one server and all the databases on another server is that I could probably be more efficient with the database server (one instance running multiple databases). But the other option seems easier to manage (archives/restorations would be contained in a single VM). Any recommendations? TIA.

  Read the article

• HP Pavillion DV6500 recovery disk failure

  - by Scott W

  I recently attempted to re-install Windows Vista on an HP Pavillion DV6500 using the factory recovery DVD's, but encountered a strange problem. When the recovery disk attempted to reformat the hard disk, it failed at 22%. The error message provided was not very informative, just the error code "0x400110020000 1005". A google search turned up some people with a similar problem who asserted that HP has been know to ship corrupted recovery DVDs. The recovery disk did manage to reformat the the recovery partition before failing though, so recovering from the partition is no longer an option. It would be possible to reinstall from an off-the-shelf retail copy of Vista and then pull the drivers from HP's website, but I don't have access to a copy of Vista, and it would really be outrageous to have to purchase a new OS when I have a perfectly valid license already. Thought about biting the bullet and upgrading to Windows 7, but my understanding is that without Vista installed I'd be unable to use the upgrade version, and be forced to purchase the more expensive non-upgrade retail copy (!). Can anyone suggest a possible solution to this Catch-22? I've run out of ideas.

  Read the article

• Handling the Outlook 2007 AutoArchive PST file

  - by Doug Luxem

  We encourage our users to enable AutoArchive in Outlook 2007 as a way to manage their mailbox sizes. However, we frequently end up running in to problems with the archive.pst file that is generated. The two main problems we have are: The archive.pst file is located in the user's local profile directory and is never backed up. A dead hard drive or stolen laptop could result in months or years of missing email. All other personal data is stored on network shares, but we can't do that for Outlook PST files. Without some sort of manual intervention, the archive will grow to enormous sizes. Although Outlook 2007 SP2 handles the large files better than before, it still results in slow response times from Outlook and an increase likelihood of a corrupt PST file. To mitigate these problems personally, I move the archives to a c:\Outlook folder and manually back that up to a shared drive every month or so. Additionally, I rotate archive files every year so that I have one file for each year (archive2008.pst, etc). Obviously, asking our users to do this same wouldn't help much. We need some sort of automated solution to take care of points 1 and 2. I have to imagine this is a common problem for Exchange organizations, so what is the best method to handle this?

  Read the article

• How do I collect SNMP readings from intermittently-connected sites?

  - by Luke404

  I am collecting SNMP data on-site for a number of systems, currently using Cacti. These systems are spread on a number of sites that aren't always connected to internet, but I also need to centralize the data on a single system (datacenter housed server) and get graphs out of it. If I directly poll remote systems with a centralized Cacti I'd loose data when a site is not connected to internet. I should record data on-site (I have a server at each site and I can run whatever I want on it) and then 'sync' everything to the central system. One hack could be a cacti or directly an rrdtool on site and then periodically rsync RRD data to the central Cacti system, but that doesn't sound like a 'clean' solution: every RRD would have to be defined at both places and rsync scripts setup with the specific file names. Can you suggest a better solution? Cacti is not a requirement but I'd like to use something like that on the central system. On-site systems need only to collect data I don't need to graph it there or manage users rights to view data and stuff like that, users will only access the centralized system.

  Read the article

• Bouncing between a 502 and 503 error

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Remote Desktop Connection issues

  - by stead1984

  I have a server at a remote site, the sites are connected to each other a site-to-site VPN connection using Cisco ASA 5510 firewalls. One end is managed by me, the other managed by the remote location's IT, between the 2 of us is another party who manage and route the connections. Remote desktop has been working fine with no problems then recently I noticed it was working for ONE server over the VPN which it previously had done. All the routes seem fine and I can still ping the remote server and even download files from an FTP site on the remote server.... so the VPN seems fine. Remote Desktop works fine to the remote server within the remote location but not over the VPN. I don't understand why it's stopped working, I originally thought it was a rule in place by the other party but they stress it's not them. The only thing that has changed on the server initiating the RDP connection is that it now runs file services sharing a folder. The source server (remote location) may or may not have had updates applied. Any idea's?

  Read the article

• New Static Website with Hosted DNS alternating 502, 503 and Page Does Not Exist Errors

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Detecting login credentials abuse

  Greetings. I am the webmaster for a small, growing industrial association. Soon, I will have to implement a restricted, members-only section for the website. The problem is that our organization membership both includes big companies as well as amateur “clubs” (it's a relatively new industry…). It is clear that those clubs will share the login ID they will use to log onto our website. The problem is to detect whether one of their members will share the login credentials with people who would not normally supposed to be accessing the website (there is no objection for such a club to have all it’s members get on the website). I have thought about logging along with each sign-on the IP address as well as the OS and the browser used; if the OS/Browser stays constant and there are no more than, say, 10 different IP addresses, the account is clearly used by very few different computers. But if there are 50 OS/Browser combination and 150 different IPs, the credentials have obviously been disseminated far, and there would be then cause for action, such as modifying the password. Of course, it is extremely annoying when your password is being unilaterally changed. So, for this problem, I thought about allowing the “clubs” to manage their own list of sub-accounts, and therefore if abuse is suspected, the user responsible would be easily pinned-down, and this “sub-member” alone would face the annoyance of a password change. Question: What potential problems would anyone see with such an approach?

  Read the article

• how to block spam email using Microsoft Outlook 2011 (Mac)?

  - by tim8691

  I'm using Microsoft Outlook 2011 for Mac and I'm getting so much spam I'm not sure how to control it. In the past, I always applied "Block Sender" and "Mark as Junk" to any spam email messages I received. This doesn't seem to be enough nowadays. Then I've started using Tools Rules to create rules based on subject, but the same spammer keeps changing subject lines, so this isn't working. I've been tracking the IP addresses they also seem to be changing with each email. Is there any key information I can use in the email to apply a rule to successfully place these spam emails in the junk folder? I'm using a "Low" level of junk email protection. The next higher level, "high", says it may eliminate valid emails, so I prefer not to use this option. There's maybe one or two spammers sending me emails, but the volume is very high now. I'm getting a variation of the following facebook email spam: Hi, Here's some activity you have missed. No matter how far away you are from friends and family, we can help you stay connected. Other people have asked to be your friend. Accept this invitation to see your previous friend requests Some variations on the subject line they've used include: Account Info Change Account Sender Mail Pending ticket notification Pending ticket status Support Center Support med center Pending Notification Reminder: Pending Notification How do people address this? Can it be done within Outlook or is it better to get a third party commercial software to plug-in or otherwise manage it? If so, why would the third party be better than Outlook's internal tools (e.g. what does it look for in the incoming email that Outlook doesn't look at)?

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >