Search Results

Search found 17859 results on 715 pages for 'static arrays'.

Page 262/715 | < Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >

• RAID controller dropping the wrong drive

  - by bramp

  I've been having an issue with 3ware 9500S-8 RAID 10, and I have contracted their tech support, but I wanted to hear the serverfault community's recommendations. Firstly, all my data is backuped and secure, so I don't mind blowing my RAID away if I have to. But let me describe the problem I've been seeing. A month ago, disk 6 dropped out of the RAID. It is mirrored with disk 7, so I wasn't that bothered. I went to the data centre and replaced it. When I got back to the office, I noticed that disk 6 will still not in the RAID, and in fact the controller was show the name of the old drive still. A week later I went back and replace the drive again, thinking I might have swapped in a bad drive. Still the same problem. I decided to reboot the machine, to see if that would "force" the controller into seeing the new drive. It did, and a rebuild started to happen (from disk 7). Eventually both drives were showing as good. A week later, the MySQL database has flagged the database is corrupt, and is unable to repair it. I don't know what has gone wrong, but I suspected this 6-7 pair. At this point I noticed that the RAID had constantly been verifying itself, over and over. Regardless of this I began to rebuild the database, which took about 19 hours. It's a big database. Near the end of the repair, the RAID controller told me it had dropped disk 7, and that some data was most likely corrupted. I contacted LSI tech support, and they very promptly started to help me. I mentioned that drive 7 had been dropped. They suspect that drive 7 was always at fault, and drive 6 had always been good. I want to know how often a RAID controller would drop the wrong drive (in this case dropping drive 6 a month ago, instead of 7). I foolishly didn't run smartctl on the drives before I started swapping them out. I just assumed the RAID controller knew what it was talking about. I think my plan of action is to replace drive 7, rebuild the array from scratch, double check smartctl on ALL the disks, and then start restoring my data again. I would appreciate anyone's input on what the correct procedure for swapping drives is, and how often failures like this happen. If anyone would like more information then I'd be happy to provide it. thanks in advance. Oh some more information. I'm running CentOS 5.3, with two RAID arrays, a simple RAID 1 for the OS, and RAID 10 for the database. Both arrays are on different controllers. The RAID 10 is made of 10 identical ST3640323AS drives, until I swapped in a SAMSUNG HD103SJ last month.

  Read the article

• How to set MinWorkingSet and MaxWorkingSet in a 64-bit .NET process?

  - by Gravitas

  How do I set MinWorkingSet and MaxWorking set for a 64-bit .NET process? p.s. I can set the MinWorkingSet and MaxWorking set for a 32-bit process, as follows: [DllImport("KERNEL32.DLL", EntryPoint = "SetProcessWorkingSetSize", SetLastError = true, CallingConvention = CallingConvention.StdCall)] internal static extern bool SetProcessWorkingSetSize(IntPtr pProcess, int dwMinimumWorkingSetSize, int dwMaximumWorkingSetSize); [DllImport("KERNEL32.DLL", EntryPoint = "GetCurrentProcess", SetLastError = true, CallingConvention = CallingConvention.StdCall)] internal static extern IntPtr MyGetCurrentProcess(); // In main(): SetProcessWorkingSetSize(Process.GetCurrentProcess().Handle, int.MaxValue, int.MaxValue); Update: Unfortunately, even if we do this call, the garbage collection trims the working set down anyway, bypassing MinWorkingSet (see "Automatic GC.Collect() in the diagram below). Question: Is there a way to lock the WorkingSet (the green line) to 1GB, to avoid the spike in page faults (the red lines) that occur when allocating new memory into the process? p.s. Every time a page fault occurs, it blocks the thread for 250us, which hits application performance badly.

  Read the article

• checkbox unchecked when i scroll listview in android

  - by Mathew

  I am new to android development. I created a listview with textbox and checkbox. When I check the checkbox and scroll it down to check some other items in the list view, the older ones are unchecked. How to avoid this problem in listview? Please guide me with my code. Here is the code: main.xml: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:id="@+id/TextView01" android:layout_height="wrap_content" android:text="List of items" android:textStyle="normal|bold" android:gravity="center_vertical|center_horizontal" android:layout_width="fill_parent"></TextView> <ListView android:id="@+id/ListView01" android:layout_height="250px" android:layout_width="fill_parent"> </ListView> <Button android:text="Save" android:id="@+id/btnSave" android:layout_width="wrap_content" android:layout_height="wrap_content"> </Button> </LinearLayout> This is the xml page I used to create dynamic list row: listview.xml: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_height="wrap_content" android:gravity="left|center" android:layout_width="wrap_content" android:paddingBottom="5px" android:paddingTop="5px" android:paddingLeft="5px"> <TextView android:id="@+id/TextView01" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center" android:textColor="#FFFF00" android:text="hi"></TextView> <TextView android:text="hello" android:id="@+id/TextView02" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginLeft="10px" android:textColor="#0099CC"></TextView> <EditText android:id="@+id/txtbox" android:layout_width="120px" android:layout_height="wrap_content" android:textSize="12sp" android:layout_x="211px" android:layout_y="13px"> </EditText> <CheckBox android:id="@+id/chkbox1" android:layout_width="wrap_content" android:layout_height="wrap_content" /> </LinearLayout> This is my activity class. CustomListViewActivity.java: package com.listivew; import android.app.Activity; import android.os.Bundle; import android.content.Context; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.widget.BaseAdapter; import android.widget.Button; import android.widget.CheckBox; import android.widget.EditText; import android.widget.ListView; import android.widget.TextView; import android.widget.Toast; public class CustomListViewActivity extends Activity { ListView lstView; static Context mContext; Button btnSave; private static class EfficientAdapter extends BaseAdapter { private LayoutInflater mInflater; public EfficientAdapter(Context context) { mInflater = LayoutInflater.from(context); } public int getCount() { return country.length; } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { final ViewHolder holder; if (convertView == null) { convertView = mInflater.inflate(R.layout.listview, parent, false); holder = new ViewHolder(); holder.text = (TextView) convertView .findViewById(R.id.TextView01); holder.text2 = (TextView) convertView .findViewById(R.id.TextView02); holder.txt = (EditText) convertView.findViewById(R.id.txtbox); holder.cbox = (CheckBox) convertView.findViewById(R.id.chkbox1); convertView.setTag(holder); } else { holder = (ViewHolder) convertView.getTag(); } holder.text.setText(curr[position]); holder.text2.setText(country[position]); holder.txt.setText(""); holder.cbox.setChecked(false); return convertView; } public class ViewHolder { TextView text; TextView text2; EditText txt; CheckBox cbox; } } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); lstView = (ListView) findViewById(R.id.ListView01); lstView.setAdapter(new EfficientAdapter(this)); btnSave = (Button)findViewById(R.id.btnSave); mContext = this; btnSave.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { // I want to print the text which is in the listview one by one. //Later i will insert it in the database // Toast.makeText(getBaseContext(), "EditText Value, checkbox value and other values", Toast.LENGTH_SHORT).show(); for (int i = 0; i < lstView.getCount(); i++) { View listOrderView; listOrderView = lstView.getChildAt(i); try{ EditText txtAmt = (EditText)listOrderView.findViewById(R.id.txtbox); CheckBox cbValue = (CheckBox)listOrderView.findViewById(R.id.chkbox1); if(cbValue.isChecked()== true){ String amt = txtAmt.getText().toString(); Toast.makeText(getBaseContext(), "Amount is :"+amt, Toast.LENGTH_SHORT).show(); } }catch (Exception e) { // TODO: handle exception } } } }); } private static final String[] country = { "item1", "item2", "item3", "item4", "item5", "item6","item7", "item8", "item9", "item10", "item11", "item12" }; private static final String[] curr = { "1", "2", "3", "4", "5", "6","7", "8", "9", "10", "11", "12" }; } Please help me to slove this problem. I have referred in many places. But I could not get proper answer to solve this problem. Please provide me the code to avoid unchecking the checkbox while scrolling up and down. Thank you.

  Read the article

• Merging dictionaries in C#

  - by orip

  What's the best way to merge 2 or more dictionaries (Dictionary<T1,T2>) in C#? (3.0 features like LINQ are fine). I'm thinking of a method signature along the lines of: public static Dictionary<TKey,TValue> Merge<TKey,TValue>(Dictionary<TKey,TValue>[] dictionaries); or public static Dictionary<TKey,TValue> Merge<TKey,TValue>(IEnumerable<Dictionary<TKey,TValue>> dictionaries); EDIT: Got a cool solution from JaredPar and Jon Skeet, but I was thinking of something that handles duplicate keys. In case of collision, it doesn't matter which value is saved to the dict as long as it's consistent.

  Read the article

• How to inject AutoMapper IMappingEngine with StructureMap

  - by Jay Walker

  Most of the examples I've found for Automapper use the static Mapper object for managing type mappings. For my project, I need to inject an IMapperEngine as part of object construction using StructureMap so that we can mock the mapper in unit tests so we can't use the static mapper. I also need to support configuring AutoMapper Profiles. My question is how can I configure the StructureMap registry so that it can supply an instance of IMappingEngine when an instance of MyService is constructed. Here is the Service constructor signature: public MyService(IMappingEngine mapper, IMyRepository myRepository, ILogger logger) And here is the StructureMap Registry public class MyRegistry : StructureMap.Configuration.DSL.Registry { public MyRegistry() { For<IMyRepository>().Use<MyRepository>(); For<ILogger>().Use<Logger>(); //what to do for IMappingEngine? } } And the profile I want to load public class MyAutoMapperProfile : AutoMapper.Profile { protected override void Configure() { this.CreateMap<MyModel, MyDTO>(); } }

  Read the article

• HTTP client - HTTP 405 error "Method not allowed". I send a HTTP Post but for some reason HTTP Get i

  - by Shino88

  Hey I am using apache library. I have created a class which sends a post request to a servlet. I have set up the parameters for the client and i have created a HTTP post object to be sent but for some reason when i excute the request i get a reposnse that says the get method is not supported(which is true cause i have only made a dopost method in my servlet). It seems that a get request is being sent but i dont know why. The post method worked before but i started gettng http error 417 "Expectation Failed" which i fixed by adding paramenters. below is my class with the post method. P.s i am developing for android. public class HTTPrequestHelper { private final ResponseHandler<String> responseHandler; private static final String CLASSTAG = HTTPrequestHelper.class.getSimpleName(); private static final DefaultHttpClient client; static{ HttpParams params = new BasicHttpParams(); params.setParameter(CoreProtocolPNames.PROTOCOL_VERSION, HttpVersion.HTTP_1_1); params.setParameter(CoreProtocolPNames.HTTP_CONTENT_CHARSET, HTTP.UTF_8); ///params.setParameter(CoreProtocolPNames.USER_AGENT, "Android-x"); params.setParameter(CoreConnectionPNames.CONNECTION_TIMEOUT, 15000); params.setParameter(CoreConnectionPNames.STALE_CONNECTION_CHECK, false); SchemeRegistry schemeRegistry = new SchemeRegistry(); schemeRegistry.register( new Scheme("http", PlainSocketFactory.getSocketFactory(), 80)); schemeRegistry.register( new Scheme("https", SSLSocketFactory.getSocketFactory(), 443)); ThreadSafeClientConnManager cm = new ThreadSafeClientConnManager(params, schemeRegistry); client = new DefaultHttpClient(cm,params); } public HTTPrequestHelper(ResponseHandler<String> responseHandler) { this.responseHandler = responseHandler; } public void performrequest(String url, String para) { HttpPost post = new HttpPost(url); StringEntity parameters; try { parameters = new StringEntity(para); post.setEntity(parameters); } catch (UnsupportedEncodingException e) { // TODO Auto-generated catch block e.printStackTrace(); } BasicHttpResponse errorResponse = new BasicHttpResponse( new ProtocolVersion("HTTP_ERROR", 1, 1), 500, "ERROR"); try { client.execute(post, this.responseHandler); } catch (Exception e) { errorResponse.setReasonPhrase(e.getMessage()); try { this.responseHandler.handleResponse(errorResponse); } catch (Exception ex) { Log.e( "ouch", "!!! IOException " + ex.getMessage() ); } } } I tried added the allow header to the request but that did not work as well but im not sure if i was doing right. below is the code. client.addRequestInterceptor(new HttpRequestInterceptor() { @Override public void process(HttpRequest request, HttpContext context) throws HttpException, IOException { //request.addHeader("Allow", "POST"); } });

  Read the article

• Can't connect to WCF service on Android

  - by illvm

  I am trying to connect to a .NET WCF service in Android using kSOAP2 (v 2.1.2), but I keep getting a fatal exception whenever I try to make the service call. I'm having a bit of difficulty tracking down the error and can't seem to figure out why it's happening. The code I am using is below: package org.example.android; import org.ksoap2.SoapEnvelope; import org.ksoap2.serialization.PropertyInfo; import org.ksoap2.serialization.SoapObject; import org.ksoap2.serialization.SoapSerializationEnvelope; import org.ksoap2.transport.HttpTransport; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.content.Intent; import android.os.Bundle; public class ValidateUser extends Activity { private static final String SOAP_ACTION = "http://tempuri.org/mobile/ValidateUser"; private static final String METHOD_NAME = "ValidateUser"; private static final String NAMESPACE = "http://tempuri.org/mobile/"; private static final String URL = "http://192.168.1.2:8002/WebService.Mobile.svc"; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.validate_user); Intent intent = getIntent(); Bundle extras = intent.getExtras(); if (extras == null) { this.finish(); } String username = extras.getString("username"); String password = extras.getString("password"); Boolean validUser = false; try { SoapObject request = new SoapObject(NAMESPACE, METHOD_NAME); PropertyInfo uName = new PropertyInfo(); uName.name = "userName"; PropertyInfo pWord = new PropertyInfo(); pWord.name = "passWord"; request.addProperty(uName, username); request.addProperty(pWord, password); SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11); envelope.dotNet = true; envelope.setOutputSoapObject(request); HttpTransport androidHttpTransport = new HttpTransport(URL); androidHttpTransport.call(SOAP_ACTION, envelope); // error occurs here Integer userId = (Integer)envelope.getResponse(); validUser = (userId != 0); } catch (Exception ex) { } } private void exit () { this.finish(); } } EDIT: Remove the old stack traces. In summary, the first problem was the program being unable to open a connection due to missing methods or libraries due to using vanilla kSOAP2 rather than a modified library for Android (kSOAP2-Android). The second issue was a settings issue. In the Manifest I did not add the following setting: <uses-permission android:name="android.permission.INTERNET" /> I am now having an issue with the XMLPullParser which I need to figure out. 12-23 10:58:06.480: ERROR/SOCKETLOG(210): add_recv_stats recv 0 12-23 10:58:06.710: WARN/System.err(210): org.xmlpull.v1.XmlPullParserException: unexpected type (position:END_DOCUMENT null@1:0 in java.io.InputStreamReader@433fb070) 12-23 10:58:06.710: WARN/System.err(210): at org.kxml2.io.KXmlParser.exception(KXmlParser.java:243) 12-23 10:58:06.720: WARN/System.err(210): at org.kxml2.io.KXmlParser.nextTag(KXmlParser.java:1363) 12-23 10:58:06.720: WARN/System.err(210): at org.ksoap2.SoapEnvelope.parse(SoapEnvelope.java:126) 12-23 10:58:06.720: WARN/System.err(210): at org.ksoap2.transport.Transport.parseResponse(Transport.java:63) 12-23 10:58:06.720: WARN/System.err(210): at org.ksoap2.transport.HttpTransportSE.call(HttpTransportSE.java:100) 12-23 10:58:06.730: WARN/System.err(210): at org.example.android.ValidateUser.onCreate(ValidateUser.java:68) 12-23 10:58:06.730: WARN/System.err(210): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1122) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2104) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2157) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.access$1800(ActivityThread.java:112) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1581) 12-23 10:58:06.730: WARN/System.err(210): at android.os.Handler.dispatchMessage(Handler.java:88) 12-23 10:58:06.730: WARN/System.err(210): at android.os.Looper.loop(Looper.java:123) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.main(ActivityThread.java:3739) 12-23 10:58:06.730: WARN/System.err(210): at java.lang.reflect.Method.invokeNative(Native Method) 12-23 10:58:06.730: WARN/System.err(210): at java.lang.reflect.Method.invoke(Method.java:515) 12-23 10:58:06.730: WARN/System.err(210): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:739) 12-23 10:58:06.730: WARN/System.err(210): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:497) 12-23 10:58:06.730: WARN/System.err(210): at dalvik.system.NativeStart.main(Native Method)

  Read the article

• Facebook Connect - Security Warning

  - by Skoder

  Hey all, I'm using Facebook connect using FBML tags. Although it works, when I run the site in Internet Explorer, a security warning comes up similar to this: The current webpage is trying to open a site in your Trusted sites list. Do you want to allow this? Current site: http://www.facebook.com Trusted site: http://localhost" My Facebook code involves these two: http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php http://static.ak.connect.facebook.com/js/api_lib/v0.4/XdCommReceiver.js I tried changing them to HTTPS: https://ssl.connect... but the errors still appear. None of my pages use SSL. I've also tried turning facebook-logo='false' but still no luck. Any ideas on how to fix this? Although it's not show-stopping, it doesn't give a good impression to users who may be feel it insecure. Thanks

  Read the article

• Html.EditorFor not updating model on post

  - by Dave

  I have a complex type composed of two nullable DateTimes: public class Period { public DateTime? Start { get; set; } public DateTime? End { get; set; } public static implicit operator string(Period period) { /* converts from Period to string */ } public static implicit operator Period(string value) { /* and back again */ } } I want to display them together in a single textbox as a date range so I can provide a nice jQuery UI date range selector. To make that happen have the following custom editor template: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<Period>" %> <% string name = ViewData.TemplateInfo.HtmlFieldPrefix; %> <%= Html.PeriodTextBox(name, Model.EarliestDate, Model.LatestDate) %> Where Html.PeriodTextBox is an extension method I've written that just concatenates the two dates sensibly, turns off autocomplete and generates a textbox, like so: public static MvcHelperString PeriodTextBox(this HtmlHelper helper, string name, DateTime? startDate, DateTime? endDate) { TagBuilder builder = new TagBuilder("input"); builder.GenerateId(name); builder.Attributes.Add("name", name); builder.Attributes.Add("type", "text"); builder.Attributes.Add("autocomplete", "off"); builder.Attributes.Add("value", ConcatDates(startDate, endDate)); return MvcHtmlString.Create(builder.ToString()); } That's working fine in that I can call <%= Html.EditorFor(m => m.ReportPeriod) %> and I get my textbox, then when the form is submitted the FormCollection passed to the post action will contain an entry named ReportPeriod with the correct value. [HttpPost] public ActionResult ReportByRange(FormCollection formValues) { Period reportPeriod = formValues["ReportPeriod"]; // creates a Period, with the expected values } The problem is if I replace the FormCollection with the model type I'm passing to the view then the ReportPeriod property never gets set. [HttpPost] public ActionResult ReportByRange(ReportViewModel viewModel) { Period reportPeriod = viewModel.ReportPeriod; // this is null } I expected MVC would try to set the string from the textbox to that property and it would automatically generate a Period (as in my FormCollection example), but it's not. How do I tell the textbox I've generated in the custom editor to poplate that property on the model?

  Read the article

• How to fix a NHibernate lazy loading error "no session or session was closed"?

  - by MCardinale

  I'm developing a website with ASP.NET MVC, NHibernate and Fluent Hibernate and getting the error "no session or session was closed" when I try to access a child object. These are my domain classes: public class ImageGallery { public virtual int Id { get; set; } public virtual string Title { get; set; } public virtual IList<Image> Images { get; set; } } public class Image { public virtual int Id { get; set; } public virtual ImageGallery ImageGallery { get; set; } public virtual string File { get; set; } } These are my maps: public class ImageGalleryMap:ClassMap<ImageGallery> { public ImageGalleryMap() { Id(x => x.Id); Map(x => x.Title); HasMany(x => x.Images); } } public class ImageMap:ClassMap<Image> { public ImageMap() { Id(x => x.Id); References(x => x.ImageGallery); Map(x => x.File); } } And this is my Session Factory helper class: public class NHibernateSessionFactory { private static ISessionFactory _sessionFactory; private static ISessionFactory SessionFactory { get { if(_sessionFactory == null) { _sessionFactory = Fluently.Configure() .Database(MySQLConfiguration.Standard.ConnectionString(MyConnString)) .Mappings(m => m.FluentMappings.AddFromAssemblyOf<ImageGalleryMap>()) .ExposeConfiguration(c => c.Properties.Add("hbm2ddl.keywords", "none")) .BuildSessionFactory(); } return _sessionFactory; } } public static ISession OpenSession() { return SessionFactory.OpenSession(); } } Everything works fine, when I get ImageGallery from database using this code: IImageGalleryRepository igr = new ImageGalleryRepository(); ImageGallery ig = igr.GetById(1); But, when I try to access the Image child object with this code string imageFile = ig.Images[1].File; I get this error: Initializing[Entities.ImageGallery#1]-failed to lazily initialize a collection of role: Entities.ImageGallery.Images, no session or session was closed Someone know how can I fix this? Thank you very much!

  Read the article

• Spark-View-Engine with ASP.NET MVC2

  - by Ben

  How do you modify a ASP.NET MVC 2.0 project to work with the Spark View Engine? I tried like described here: http://dotnetslackers.com/articles/aspnet/installing-the-spark-view-engine-into-asp-net-mvc-2-preview-2.aspx But somehow it still tries to route to .aspx files. Here the code of my global.asax: public class MvcApplication : System.Web.HttpApplication { public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = "" } // Parameter defaults ); } protected void Application_Start() { SparkViewFactory svf = new SparkViewFactory(); PrecompileViews(svf); AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); } public static void PrecompileViews(SparkViewFactory svf) { var controllerFactory = svf; var viewFactory = new SparkViewFactory(controllerFactory.Settings); var batch = new SparkBatchDescriptor(); batch .For<HomeController>() .For<AccountController>(); viewFactory.Precompile(batch); } } }

  Read the article

• Entity Framework 4.0 and DDD patterns

  - by Voice

  Hi everybody I use EntityFramework as ORM and I have simple POCO Domain Model with two base classes that represent Value Object and Entity Object Patterns (Evans). These two patterns is all about equality of two objects, so I overrode Equals and GetHashCode methods. Here are these two classes: public abstract class EntityObject<T>{ protected T _ID = default(T); public T ID { get { return _ID; } protected set { _ID = value; } } public sealed override bool Equals(object obj) { EntityObject<T> compareTo = obj as EntityObject<T>; return (compareTo != null) && ((HasSameNonDefaultIdAs(compareTo) || (IsTransient && compareTo.IsTransient)) && HasSameBusinessSignatureAs(compareTo)); } public virtual void MakeTransient() { _ID = default(T); } public bool IsTransient { get { return _ID == null || _ID.Equals(default(T)); } } public override int GetHashCode() { if (default(T).Equals(_ID)) return 0; return _ID.GetHashCode(); } private bool HasSameBusinessSignatureAs(EntityObject<T> compareTo) { return ToString().Equals(compareTo.ToString()); } private bool HasSameNonDefaultIdAs(EntityObject<T> compareTo) { return (_ID != null && !_ID.Equals(default(T))) && (compareTo._ID != null && !compareTo._ID.Equals(default(T))) && _ID.Equals(compareTo._ID); } public override string ToString() { StringBuilder str = new StringBuilder(); str.Append(" Class: ").Append(GetType().FullName); if (!IsTransient) str.Append(" ID: " + _ID); return str.ToString(); } } public abstract class ValueObject<T, U> : IEquatable<T> where T : ValueObject<T, U> { private static List<PropertyInfo> Properties { get; set; } private static Func<ValueObject<T, U>, PropertyInfo, object[], object> _GetPropValue; static ValueObject() { Properties = new List<PropertyInfo>(); var propParam = Expression.Parameter(typeof(PropertyInfo), "propParam"); var target = Expression.Parameter(typeof(ValueObject<T, U>), "target"); var indexPar = Expression.Parameter(typeof(object[]), "indexPar"); var call = Expression.Call(propParam, typeof(PropertyInfo).GetMethod("GetValue", new[] { typeof(object), typeof(object[]) }), new[] { target, indexPar }); var lambda = Expression.Lambda<Func<ValueObject<T, U>, PropertyInfo, object[], object>>(call, target, propParam, indexPar); _GetPropValue = lambda.Compile(); } public U ID { get; protected set; } public override Boolean Equals(Object obj) { if (ReferenceEquals(null, obj)) return false; if (obj.GetType() != GetType()) return false; return Equals(obj as T); } public Boolean Equals(T other) { if (ReferenceEquals(null, other)) return false; if (ReferenceEquals(this, other)) return true; foreach (var property in Properties) { var oneValue = _GetPropValue(this, property, null); var otherValue = _GetPropValue(other, property, null); if (null == oneValue && null == otherValue) return false; if (false == oneValue.Equals(otherValue)) return false; } return true; } public override Int32 GetHashCode() { var hashCode = 36; foreach (var property in Properties) { var propertyValue = _GetPropValue(this, property, null); if (null == propertyValue) continue; hashCode = hashCode ^ propertyValue.GetHashCode(); } return hashCode; } public override String ToString() { var stringBuilder = new StringBuilder(); foreach (var property in Properties) { var propertyValue = _GetPropValue(this, property, null); if (null == propertyValue) continue; stringBuilder.Append(propertyValue.ToString()); } return stringBuilder.ToString(); } protected static void RegisterProperty(Expression<Func<T, Object>> expression) { MemberExpression memberExpression; if (ExpressionType.Convert == expression.Body.NodeType) { var body = (UnaryExpression)expression.Body; memberExpression = body.Operand as MemberExpression; } else memberExpression = expression.Body as MemberExpression; if (null == memberExpression) throw new InvalidOperationException("InvalidMemberExpression"); Properties.Add(memberExpression.Member as PropertyInfo); } } Everything was OK until I tried to delete some related objects (aggregate root object with two dependent objects which was marked for cascade deletion): I've got an exception "The relationship could not be changed because one or more of the foreign-key properties is non-nullable". I googled this and found http://blog.abodit.com/2010/05/the-relationship-could-not-be-changed-because-one-or-more-of-the-foreign-key-properties-is-non-nullable/ I changed GetHashCode to base.GetHashCode() and error disappeared. But now it breaks all my code: I can't override GetHashCode for my POCO objects = I can't override Equals = I can't implement Value Object and Entity Object patters for my POCO objects. So, I appreciate any solutions, workarounds here etc.

  Read the article

• Syntax error on token "QUOTE", VariableDeclaratorId expected after this token

  - by user356812

  I've posted a bigger chunk of the code below. You can see that initially QUOTE was procedural- coded in place. I'm trying to learn how to use declarative design so I want to do the same thing but by using resources. It seems like I need to access the string.xml thru the @R.id tag and identify QUOTE with that string value. But I don't know enough to negotiate this. Any tips? Thanks! public class circle extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(new GraphicsView(this)); } static public class GraphicsView extends View { //private static final String QUOTE = "Happy Birthday to David."; private final String QUOTE = getString(R.string.quote); ..... @Override protected void onDraw(Canvas canvas) { // Drawing commands go here canvas.drawPath(circle, cPaint); canvas.drawTextOnPath(QUOTE, circle, 0, 20, tPaint);

  Read the article

• SPP Socket createRfcommSocketToServiceRecord will not connect

  - by philDev

  Hello, I want to use Android 2.1 to connect to an external Bluetooth device, wich is offering an SPP port to me. In this case it is an external GPS unit. When I'm trying to connect I can't connect an established socket while being in the "client" mode. Then if I try to set up a socket (being in the server role), to RECEIVE text from my PC everything works just fine. The Computer can connect as the client to the Socket on the Phone via SPP using the SSP UUID or some random UUID. So the Problem is not that I'm using the wrong UUID. But the other way around (e.g. calling connect on the established client socket) createRfcommSocketToServiceRecord(UUID uuid)) just doesn't work. Sadly I don't have the time to inspect the problem further. It would be greate If somebody could point me the right way. In the following part of the Logfile has to be the Problem. Greets PhilDev P.S. I'm going to be present during the Office hours. Here the log file: 03-21 03:10:52.020: DEBUG/BluetoothSocket.cpp(4643): initSocketFromFdNative 03-21 03:10:52.025: DEBUG/BluetoothSocket(4643): connect 03-21 03:10:52.025: DEBUG/BluetoothSocket(4643): doSdp 03-21 03:10:52.050: DEBUG/ADAPTER(2132): create_device(01:00:00:7F:B5:B3) 03-21 03:10:52.050: DEBUG/ADAPTER(2132): adapter_create_device(01:00:00:7F:B5:B3) 03-21 03:10:52.055: DEBUG/DEVICE(2132): Creating device [address = 01:00:00:7F:B5:B3] /org/bluez/2132/hci0/dev_01_00_00_7F_B5_B3 [name = ] 03-21 03:10:52.055: DEBUG/DEVICE(2132): btd_device_ref(0x10c18): ref=1 03-21 03:10:52.065: INFO/BluetoothEventLoop.cpp(1914): event_filter: Received signal org.bluez.Adapter:DeviceCreated from /org/bluez/2132/hci0 03-21 03:10:52.065: INFO/BluetoothService.cpp(1914): ... Object Path = /org/bluez/2132/hci0/dev_01_00_00_7F_B5_B3 03-21 03:10:52.065: INFO/BluetoothService.cpp(1914): ... Pattern = 00001101-0000-1000-8000-00805f9b34fb, strlen = 36 03-21 03:10:52.070: DEBUG/DEVICE(2132): *************DiscoverServices******** 03-21 03:10:52.070: INFO/DTUN_HCID(2132): dtun_client_get_remote_svc_channel: starting discovery on (uuid16=0x0011) 03-21 03:10:52.070: INFO/DTUN_HCID(2132): bdaddr=01:00:00:7F:B5:B3 03-21 03:10:52.070: INFO/DTUN_CLNT(2132): Client calling DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4) 03-21 03:10:52.070: INFO/(2106): DTUN_ReceiveCtrlMsg: [DTUN] Received message [BTLIF_DTUN_METHOD_CALL] 4354 03-21 03:10:52.070: INFO/(2106): handle_method_call: handle_method_call :: received DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4), len 134 03-21 03:10:52.075: ERROR/BTLD(2106): ****************search UUID = 1101*********** 03-21 03:10:52.075: INFO//system/bin/btld(2103): btapp_dm_GetRemoteServiceChannel() 03-21 03:10:52.120: DEBUG/BluetoothService(1914): updateDeviceServiceChannelCache(01:00:00:7F:B5:B3) 03-21 03:10:52.120: DEBUG/BluetoothEventLoop(1914): ClassValue: null for remote device: 01:00:00:7F:B5:B3 is null 03-21 03:10:52.120: INFO/BluetoothEventLoop.cpp(1914): event_filter: Received signal org.bluez.Adapter:PropertyChanged from /org/bluez/2132/hci0 03-21 03:10:52.305: WARN/BTLD(2106): bta_dm_check_av:0 03-21 03:10:56.395: DEBUG/WifiService(1914): ACTION_BATTERY_CHANGED pluggedType: 2 03-21 03:10:57.440: WARN/BTLD(2106): SDP - Rcvd conn cnf with error: 0x4 CID 0x43 03-21 03:10:57.440: INFO/BTL-IFS(2106): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 10) 03-21 03:10:57.445: INFO/DTUN_CLNT(2132): dtun-rx signal [DTUN_SIG_DM_RMT_SERVICE_CHANNEL] (id 42) len 15 03-21 03:10:57.445: INFO/DTUN_HCID(2132): dtun_dm_sig_rmt_service_channel: success=1, service=00000000 03-21 03:10:57.445: ERROR/DTUN_HCID(2132): discovery unsuccessful! package de.phil_dev.android.BT; import java.io.BufferedInputStream; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import java.util.UUID; import android.app.Activity; import android.bluetooth.BluetoothAdapter; import android.bluetooth.BluetoothClass; import android.bluetooth.BluetoothDevice; import android.bluetooth.BluetoothServerSocket; import android.bluetooth.BluetoothSocket; import android.content.Intent; import android.os.Bundle; import android.util.Log; import android.widget.Toast; public class ThinBTClient extends Activity { private static final String TAG = "THINBTCLIENT"; private static final boolean D = true; private BluetoothAdapter mBluetoothAdapter = null; private BluetoothSocket btSocket = null; private BufferedInputStream inStream = null; private BluetoothServerSocket myServerSocket; private ConnectThread myConnection; private ServerThread myServer; // Well known SPP UUID (will *probably* map to // RFCOMM channel 1 (default) if not in use); // see comments in onResume(). private static final UUID MY_UUID = UUID .fromString("00001101-0000-1000-8000-00805F9B34FB"); // .fromString("94f39d29-7d6d-437d-973b-fba39e49d4ee"); // ==> hardcode your slaves MAC address here <== // PC // private static String address = "00:09:DD:50:86:A0"; // GPS private static String address = "00:0B:0D:8E:D4:33"; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); if (D) Log.e(TAG, "+++ ON CREATE +++"); mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter(); if (mBluetoothAdapter == null) { Toast.makeText(this, "Bluetooth is not available.", Toast.LENGTH_LONG).show(); finish(); return; } if (!mBluetoothAdapter.isEnabled()) { Toast.makeText(this, "Please enable your BT and re-run this program.", Toast.LENGTH_LONG).show(); finish(); return; } if (D) Log.e(TAG, "+++ DONE IN ON CREATE, GOT LOCAL BT ADAPTER +++"); } @Override public void onStart() { super.onStart(); if (D) Log.e(TAG, "++ ON START ++"); } @Override public void onResume() { super.onResume(); if (D) { Log.e(TAG, "+ ON RESUME +"); Log.e(TAG, "+ ABOUT TO ATTEMPT CLIENT CONNECT +"); } // Make the phone discoverable // When this returns, it will 'know' about the server, // via it's MAC address. // mBluetoothAdapter.startDiscovery(); BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address); Log.e(TAG, device.getName() + " connected"); // myServer = new ServerThread(); // myServer.start(); myConnection = new ConnectThread(device); myConnection.start(); } @Override public void onPause() { super.onPause(); if (D) Log.e(TAG, "- ON PAUSE -"); try { btSocket.close(); } catch (IOException e2) { Log.e(TAG, "ON PAUSE: Unable to close socket.", e2); } } @Override public void onStop() { super.onStop(); if (D) Log.e(TAG, "-- ON STOP --"); } @Override public void onDestroy() { super.onDestroy(); if (D) Log.e(TAG, "--- ON DESTROY ---"); } private class ServerThread extends Thread { private final BluetoothServerSocket myServSocket; public ServerThread() { BluetoothServerSocket tmp = null; // create listening socket try { tmp = mBluetoothAdapter .listenUsingRfcommWithServiceRecord( "myServer", MY_UUID); } catch (IOException e) { Log.e(TAG, "Server establishing failed"); } myServSocket = tmp; } public void run() { Log.e(TAG, "Beginn waiting for connection"); BluetoothSocket connectSocket = null; InputStream inStream = null; byte[] buffer = new byte[1024]; int bytes; while (true) { try { connectSocket = myServSocket.accept(); } catch (IOException e) { Log.e(TAG, "Connection failed"); break; } Log.e(TAG, "ALL THE WAY AROUND"); try { connectSocket = connectSocket.getRemoteDevice() .createRfcommSocketToServiceRecord(MY_UUID); connectSocket.connect(); } catch (IOException e1) { Log.e(TAG, "DIDNT WORK"); } // handle Connection try { inStream = connectSocket.getInputStream(); while (true) { try { bytes = inStream.read(buffer); Log.e(TAG, "Received: " + buffer.toString()); } catch (IOException e3) { Log.e(TAG, "disconnected"); break; } } } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); break; } } } void cancel() { } } private class ConnectThread extends Thread { private final BluetoothSocket mySocket; private final BluetoothDevice myDevice; public ConnectThread(BluetoothDevice device) { myDevice = device; BluetoothSocket tmp = null; try { tmp = device.createRfcommSocketToServiceRecord(MY_UUID); } catch (IOException e) { Log.e(TAG, "CONNECTION IN THREAD DIDNT WORK"); } mySocket = tmp; } public void run() { Log.e(TAG, "STARTING TO CONNECT THE SOCKET"); setName("My Connection Thread"); InputStream inStream = null; boolean run = false; //mBluetoothAdapter.cancelDiscovery(); try { mySocket.connect(); run = true; } catch (IOException e) { run = false; Log.e(TAG, this.getName() + ": CONN DIDNT WORK, Try closing socket"); try { mySocket.close(); } catch (IOException e1) { Log.e(TAG, this.getName() + ": COULD CLOSE SOCKET", e1); this.destroy(); } } synchronized (ThinBTClient.this) { myConnection = null; } byte[] buffer = new byte[1024]; int bytes; // handle Connection try { inStream = mySocket.getInputStream(); while (run) { try { bytes = inStream.read(buffer); Log.e(TAG, "Received: " + buffer.toString()); } catch (IOException e3) { Log.e(TAG, "disconnected"); } } } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } // starting connected thread (handling there in and output } public void cancel() { try { mySocket.close(); } catch (IOException e) { Log.e(TAG, this.getName() + " SOCKET NOT CLOSED"); } } } }

  Read the article

• Visual State Manager in WPF not working for me

  - by Román

  Hi In a wpf project I have this XAML code <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:ic="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions" x:Class="WpfApplication1.MainWindow" xmlns:vsm="clr-namespace:System.Windows;assembly=WPFToolkit" x:Name="Window" Title="MainWindow" Width="640" Height="480"> <vsm:VisualStateManager.VisualStateGroups> <vsm:VisualStateGroup x:Name="VisualStateGroup"> <vsm:VisualState x:Name="Loading"> <Storyboard> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="control" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="button" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Collapsed}"/> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="button1" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </vsm:VisualState> <VisualState x:Name="Normal"> <Storyboard> <ObjectAnimationUsingKeyFrames BeginTime="00:00:00" Duration="00:00:00.0010000" Storyboard.TargetName="control" Storyboard.TargetProperty="(UIElement.Visibility)"> <DiscreteObjectKeyFrame KeyTime="00:00:00" Value="{x:Static Visibility.Collapsed}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> </vsm:VisualStateGroup> </vsm:VisualStateManager.VisualStateGroups> <Grid x:Name="LayoutRoot"> <Grid.Resources> <ControlTemplate x:Key="loadingAnimation"> <Image x:Name="content" Opacity="1"> <Image.Source> <DrawingImage> <DrawingImage.Drawing> <DrawingGroup> <GeometryDrawing Brush="Transparent"> <GeometryDrawing.Geometry> <RectangleGeometry Rect="0,0,1,1"/> </GeometryDrawing.Geometry> </GeometryDrawing> <DrawingGroup> <DrawingGroup.Transform> <RotateTransform x:Name="angle" Angle="0" CenterX="0.5" CenterY="0.5"/> </DrawingGroup.Transform> <GeometryDrawing Geometry="M0.9,0.5 A0.4,0.4,90,1,1,0.5,0.1"> <GeometryDrawing.Pen> <Pen Brush="Green" Thickness="0.1"/> </GeometryDrawing.Pen> </GeometryDrawing> <GeometryDrawing Brush="Green" Geometry="M0.5,0 L0.7,0.1 L0.5,0.2"/> </DrawingGroup> </DrawingGroup> </DrawingImage.Drawing> </DrawingImage> </Image.Source> </Image> <ControlTemplate.Triggers> <Trigger Property="Visibility" Value="Visible"> <Trigger.EnterActions> <BeginStoryboard x:Name="animation"> <Storyboard> <DoubleAnimation From="0" To="359" Duration="0:0:1.5" RepeatBehavior="Forever" Storyboard.TargetName="angle" Storyboard.TargetProperty="Angle"/> </Storyboard> </BeginStoryboard> </Trigger.EnterActions> <Trigger.ExitActions> <StopStoryboard BeginStoryboardName="animation"/> </Trigger.ExitActions> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Grid.Resources> <Grid.ColumnDefinitions> <ColumnDefinition MinWidth="76.128" Width="Auto"/> <ColumnDefinition MinWidth="547.872" Width="Auto"/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="0.05*"/> <RowDefinition Height="0.95*"/> </Grid.RowDefinitions> <Button x:Name="button" Margin="0,0,1,0.04" Width="100" Content="Load" d:LayoutOverrides="Height" Click="Button_Click"/> <Button x:Name="button1" HorizontalAlignment="Left" Margin="0,0,0,0.04" Width="100" Content="Stop" Grid.Column="1" d:LayoutOverrides="Height" Click="Button2_Click" Visibility="Collapsed"/> <Control x:Name="control" Margin="10" Height="100" Grid.Row="1" Grid.ColumnSpan="2" Width="100" Template="{DynamicResource loadingAnimation}" Visibility="Collapsed"/> </Grid> </Window> and the following code behind on the window public partial class MainWindow : Window { public MainWindow() { this.InitializeComponent(); } private void Button1_Click(object sender, System.Windows.RoutedEventArgs e) { VisualStateManager.GoToState(this, "Loading", true); } private void Button2_Click(object sender, System.Windows.RoutedEventArgs e) { VisualStateManager.GoToState(this, "Normal", true); } } However, when I click the first button (button1) the state change is not being triggered. What am I doing wrong? Thanks in advance

  Read the article

• Hooking into AppInitialize with WCF service

  - by Mark

  Hi, Im having issues with my WCF service. I need to do a windsor container injection pre application_start and noticed i can use the AppInitialise method. It works on visual studio debug but when I deploy to IIS the code does not get fired.. I initialized the class as follows public static class Class1 { public static void AppInitialize() { IWindsorContainer container; container = new WindsorContainer("windsor.xml"); container.AddFacility(); container.Resolve(); } } Is there any special task i need to do to get this to work on IIS. Im using version 6. Thanks!

  Read the article

• WPF ComboBox Binding breaks when using ControlTemplate

  - by Mitch

  I have a WPF ComboBox that has been working fine until I recently created a ControlTemplate for it to enable me to change the color of the DropDown arrow. The ComboBox still works correctly except the Bound Text value now just shows the name of the Business Object rather than the bound value. I guess that binding like Text="{Binding Path=CaseDateRange}" no longer works when using a ControlTemplate, yet the ItemsSource binding on the dropdown seems to still work fine. Can anyone offer some help with how I need to change my binding when using a ControlTemplate. The code for the ControlTemplate and ComboBox is as follows <ControlTemplate x:Key="ComboBoxControlTemplate1" TargetType="{x:Type ComboBox}"> <Grid x:Name="MainGrid" SnapsToDevicePixels="True"> <Grid.ColumnDefinitions> <ColumnDefinition Width="*"/> <ColumnDefinition MinWidth="{DynamicResource {x:Static SystemParameters.VerticalScrollBarWidthKey}}" Width="0"/> </Grid.ColumnDefinitions> <Popup x:Name="PART_Popup" AllowsTransparency="True" Grid.ColumnSpan="2" IsOpen="{Binding IsDropDownOpen, RelativeSource={RelativeSource TemplatedParent}}" Margin="1" PopupAnimation="{DynamicResource {x:Static SystemParameters.ComboBoxPopupAnimationKey}}" Placement="Bottom" OpacityMask="#FF2A3D64"> <Microsoft_Windows_Themes:SystemDropShadowChrome x:Name="Shdw" Color="Transparent" MaxHeight="{TemplateBinding MaxDropDownHeight}" MinWidth="{Binding ActualWidth, ElementName=MainGrid}"> <Border x:Name="DropDownBorder" BorderBrush="White" BorderThickness="1" CornerRadius="3" Background="{DynamicResource DialogDarkBlue}"> <ScrollViewer x:Name="DropDownScrollViewer" > <Grid RenderOptions.ClearTypeHint="Enabled"> <Canvas HorizontalAlignment="Left" Height="0" VerticalAlignment="Top" Width="0"> <Rectangle x:Name="OpaqueRect" Fill="{Binding Background, ElementName=DropDownBorder}" Height="{Binding ActualHeight, ElementName=DropDownBorder}" Width="{Binding ActualWidth, ElementName=DropDownBorder}"/> </Canvas> <ItemsPresenter x:Name="ItemsPresenter" KeyboardNavigation.DirectionalNavigation="Contained" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/> </Grid> </ScrollViewer> </Border> </Microsoft_Windows_Themes:SystemDropShadowChrome> </Popup> <ToggleButton BorderBrush="{TemplateBinding BorderBrush}" Background="{TemplateBinding Background}" Grid.ColumnSpan="2" IsChecked="{Binding IsDropDownOpen, Mode=TwoWay, RelativeSource={RelativeSource TemplatedParent}}" Foreground="White"> <ToggleButton.Style> <Style TargetType="{x:Type ToggleButton}"> <Setter Property="OverridesDefaultStyle" Value="True"/> <Setter Property="IsTabStop" Value="False"/> <Setter Property="Focusable" Value="False"/> <Setter Property="ClickMode" Value="Press"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type ToggleButton}"> <Microsoft_Windows_Themes:ButtonChrome x:Name="Chrome" BorderBrush="{TemplateBinding BorderBrush}" Background="{TemplateBinding Background}" RenderMouseOver="{TemplateBinding IsMouseOver}" RenderPressed="{TemplateBinding IsPressed}" SnapsToDevicePixels="True"> <Grid HorizontalAlignment="Right" Width="{DynamicResource {x:Static SystemParameters.VerticalScrollBarWidthKey}}"> <Path x:Name="Arrow" Data="M0,0L3.5,4 7,0z" Fill="White" HorizontalAlignment="Center" Margin="3,1,0,0" VerticalAlignment="Center"/> </Grid> </Microsoft_Windows_Themes:ButtonChrome> <ControlTemplate.Triggers> <Trigger Property="IsChecked" Value="True"> <Setter Property="RenderPressed" TargetName="Chrome" Value="True"/> </Trigger> <Trigger Property="IsEnabled" Value="False"> <Setter Property="Fill" TargetName="Arrow" Value="#FFAFAFAF"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> </ToggleButton.Style> </ToggleButton> <ContentPresenter ContentTemplate="{TemplateBinding SelectionBoxItemTemplate}" Content="{TemplateBinding SelectionBoxItem}" ContentStringFormat="{TemplateBinding SelectionBoxItemStringFormat}" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" IsHitTestVisible="False" Margin="{TemplateBinding Padding}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}"/> </Grid> <ControlTemplate.Triggers> <Trigger Property="HasDropShadow" SourceName="PART_Popup" Value="True"> <Setter Property="Margin" TargetName="Shdw" Value="0,0,5,5"/> <Setter Property="Color" TargetName="Shdw" Value="#71000000"/> </Trigger> <Trigger Property="HasItems" Value="False"> <Setter Property="Height" TargetName="DropDownBorder" Value="95"/> </Trigger> <Trigger Property="IsEnabled" Value="False"> <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/> <Setter Property="Background" Value="#FFF4F4F4"/> </Trigger> <Trigger Property="IsGrouping" Value="True"> <Setter Property="ScrollViewer.CanContentScroll" Value="False"/> </Trigger> <Trigger Property="CanContentScroll" SourceName="DropDownScrollViewer" Value="False"> <Setter Property="Canvas.Top" TargetName="OpaqueRect" Value="{Binding VerticalOffset, ElementName=DropDownScrollViewer}"/> <Setter Property="Canvas.Left" TargetName="OpaqueRect" Value="{Binding HorizontalOffset, ElementName=DropDownScrollViewer}"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> And the ComboBox is <ComboBox x:Name="cboSelectedCase" Text="{Binding Path=CaseDateRange}" DisplayMemberPath="CaseDateRange" SelectedValuePath="CaseID" Template="{DynamicResource ComboBoxControlTemplate1}" />

  Read the article

• LinkDemand error on webserver when using TraceSource

  - by robertpnl

  Hi, On a webserver (shared hosting provider) I published a website with a ADO.Net Framework model in use with MySql Connector 6.3.1. When I request a page, a Security Exception will be happen with this error messages: "LinkDemand The type of the first permission that failed was: System.Security.Permissions.SecurityPermission The Zone of the assembly that failed was: MyComputer ". This exception raised when code collect the listeners of a tracksource: public class MySqlTrace { private static TraceSource source = new TraceSource("mysql"); static MySqlTrace() { foreach (TraceListener listener in source.Listeners) // <-- Exception throw here { // ... } } } The web.config doesn't have any trace data or system.diagnostics. My question is, why will a get a LinkDemand security exception during collecting the source listeners. What can maybe be wrong in here?

  Read the article

• Cannot convert the value in attribute '[attr]' to object of type 'System.Windows.TemplateBindingExte

  - by Krimson

  Hi, I get this error when I define my attached dependency properties in a class outside the class hierarchy and set the owner to a common parent class. Attached dependency property in WindowBase class (outside class hierarchy = generated error): public static readonly DependencyProperty AreaColorProperty = DependencyProperty.RegisterAttached("AreaColor", typeof(AreaColor), typeof(Window)); TemplateBinding that fails {TemplateBinding local:WindowBase.AreaColor} If I instead define the attached dependency property in a class within the class heirarchy and set the owner to this class, then I don't get any errors, why is this? Attached dependency property in WindowBase (within class hierarchy = no errors): public static readonly DependencyProperty AreaColorProperty = DependencyProperty.RegisterAttached("AreaColor", typeof(AreaColor), typeof(WindowBase)); Best Regards, Jesper

  Read the article

• Using James Server in Eclipse With JavaMail

  - by Jack Sparrow

  Would anyone be able to tell me how I can go about using James server as my server with Java in Eclipse? I'm trying to test the two classes posted below but i get the following error: Exception in thread "main" javax.mail.AuthenticationFailedException: Authentication failed. public class JamesConfigTest { public static void main(String[] args) throws Exception { // CREATE CLIENT INSTANCES MailClient redClient = new MailClient("red", "localhost"); MailClient greenClient = new MailClient("green", "localhost"); MailClient blueClient = new MailClient("blue", "localhost"); // CLEAR EVERYBODY'S INBOX redClient.checkInbox(MailClient.CLEAR_MESSAGES); greenClient.checkInbox(MailClient.CLEAR_MESSAGES); blueClient.checkInbox(MailClient.CLEAR_MESSAGES); Thread.sleep(500); // Let the server catch up // SEND A COUPLE OF MESSAGES TO BLUE (FROM RED AND GREEN) redClient.sendMessage( "blue@localhost", "Testing blue from red", "This is a test message"); greenClient.sendMessage( "blue@localhost", "Testing blue from green", "This is a test message"); Thread.sleep(500); // Let the server catch up // LIST MESSAGES FOR BLUE (EXPECT MESSAGES FROM RED AND GREEN) blueClient.checkInbox(MailClient.SHOW_AND_CLEAR); } } import java.io.*; import java.util.*; import javax.mail.*; import javax.mail.internet.*; public class MailClient extends Authenticator { public static final int SHOW_MESSAGES = 1; public static final int CLEAR_MESSAGES = 2; public static final int SHOW_AND_CLEAR = SHOW_MESSAGES + CLEAR_MESSAGES; protected String from; protected Session session; protected PasswordAuthentication authentication; public MailClient(String user, String host) { this(user, host, false); } public MailClient(String user, String host, boolean debug) { from = user + '@' + host; authentication = new PasswordAuthentication(user, user); Properties props = new Properties(); props.put("mail.user", user); props.put("mail.host", host); props.put("mail.debug", debug ? "true" : "false"); props.put("mail.store.protocol", "pop3"); props.put("mail.transport.protocol", "smtp"); session = Session.getInstance(props, this); } public PasswordAuthentication getPasswordAuthentication() { return authentication; } public void sendMessage( String to, String subject, String content) throws MessagingException { System.out.println("SENDING message from " + from + " to " + to); System.out.println(); MimeMessage msg = new MimeMessage(session); msg.addRecipients(Message.RecipientType.TO, to); msg.setSubject(subject); msg.setText(content); Transport.send(msg); } public void checkInbox(int mode) throws MessagingException, IOException { if (mode == 0) return; boolean show = (mode & SHOW_MESSAGES) > 0; boolean clear = (mode & CLEAR_MESSAGES) > 0; String action = (show ? "Show" : "") + (show && clear ? " and " : "") + (clear ? "Clear" : ""); System.out.println(action + " INBOX for " + from); Store store = session.getStore(); store.connect(); Folder root = store.getDefaultFolder(); Folder inbox = root.getFolder("inbox"); inbox.open(Folder.READ_WRITE); Message[] msgs = inbox.getMessages(); if (msgs.length == 0 && show) { System.out.println("No messages in inbox"); } for (int i = 0; i < msgs.length; i++) { MimeMessage msg = (MimeMessage)msgs[i]; if (show) { System.out.println(" From: " + msg.getFrom()[0]); System.out.println(" Subject: " + msg.getSubject()); System.out.println(" Content: " + msg.getContent()); } if (clear) { msg.setFlag(Flags.Flag.DELETED, true); } } inbox.close(true); store.close(); System.out.println(); } }

  Read the article

• How to use Bouncy Castle lightweight API with AES and PBE

  - by Adrian

  I have a block of ciphertext that was created using the JCE algorithim "PBEWithSHA256And256BitAES-CBC-BC". The provider is BouncyCastle. What I'd like to do it decrypt this ciphertext using the BouncyCastle lightweight API. I don't want to use JCE because that requires installing the Unlimited Strength Jurisdiction Policy Files. Documentation seems to be thin on the ground when it comes to using BC with PBE and AES. Here's what I have so far. The decryption code runs without exception but returns rubbish. The encryption code, String password = "qwerty"; String plainText = "hello world"; byte[] salt = generateSalt(); byte[] cipherText = encrypt(plainText, password.toCharArray(), salt); private static byte[] generateSalt() throws NoSuchAlgorithmException { byte salt[] = new byte[8]; SecureRandom saltGen = SecureRandom.getInstance("SHA1PRNG"); saltGen.nextBytes(salt); return salt; } private static byte[] encrypt(String plainText, char[] password, byte[] salt) throws NoSuchAlgorithmException, InvalidKeySpecException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException { Security.addProvider(new BouncyCastleProvider()); PBEParameterSpec pbeParamSpec = new PBEParameterSpec(salt, 20); PBEKeySpec pbeKeySpec = new PBEKeySpec(password); SecretKeyFactory keyFac = SecretKeyFactory.getInstance("PBEWithSHA256And256BitAES-CBC-BC"); SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec); Cipher encryptionCipher = Cipher.getInstance("PBEWithSHA256And256BitAES-CBC-BC"); encryptionCipher.init(Cipher.ENCRYPT_MODE, pbeKey, pbeParamSpec); return encryptionCipher.doFinal(plainText.getBytes()); } The decryption code, byte[] decryptedText = decrypt(cipherText, password.getBytes(), salt); private static byte[] decrypt(byte[] cipherText, byte[] password, byte[] salt) throws DataLengthException, IllegalStateException, InvalidCipherTextException, InvalidKeyException, NoSuchAlgorithmException, NoSuchPaddingException, IllegalBlockSizeException, BadPaddingException { BlockCipher engine = new AESEngine(); CBCBlockCipher cipher = new CBCBlockCipher(engine); PKCS5S1ParametersGenerator keyGenerator = new PKCS5S1ParametersGenerator(new SHA256Digest()); keyGenerator.init(password, salt, 20); CipherParameters keyParams = keyGenerator.generateDerivedParameters(256); cipher.init(false, keyParams); byte[] decryptedBytes = new byte[cipherText.length]; int numBytesCopied = cipher.processBlock(cipherText, 0, decryptedBytes, 0); return decryptedBytes; }

  Read the article

• How to disable maximize button in a WPF appication page not in a window

  - by Lukman

  I want to disable the maximize button in WPF application page, not in a WPF application window When I searched in Google, it is available methods for disabling the maximize button in WPF window The code snippet is as follows Window.WindowStyle= WindowStyle.None But is not working in WPF page It is showing errors. In WPF page there is WindowStyleProperty instead of WindowStyle and it is showing errors as Error 1:A static readonly field cannot be assigned to (except in a static constructor or a variable initializer) Error 2: Cannot implicitly convert type 'System.Windows.WindowStyle' to 'System.Windows.DependencyProperty' So how can I disable the maximize button in WPF page Then how can I implement it Suggest me any sample code snippet.... Advance thanks.........

  Read the article

• Using Monitor Class

  - by Mubashar Ahmad

  Dear All I would like to ask couple of Questions regarding the use of Monitor Class in .Net. To understand the Questions please look at the following Code. public class MyClass { private List<int> _MyCollection = new List<int>(); public void GetLock() { Monitor.Enter(_MyCollection); } public void ReleaseLock() { Monitor.Exit(_MyCollection); } public void UpdateCollection(/*anyparam*/) { //update collection without lock on collection } } public class MyAppMain { private static MyClass myclass = new MyClass(); public static void main(args) { try { myclass.GetLock(); //an operation that does not do any update on myclass but wanted //to ensure that the collection within myclass never update //while its doing following opetion //Do somthing } finally { myclass.ReleaseLock(); } } } Now is this the right use of monitor and do i need to use Pulse or PulseAll to signal waiting thread and if so than should use plus before or after Exit function? Regards Mubashar

  Read the article

• populate jsp drop down with database info

  - by Cano63

  Hello, people, i,m looking for the way to populate a jsp dropdown. I want that when the jsp load it fill the dropdown with the info that i have in a database table. Down I,m icluding the code of my class that will create the array and fill it with the database info. Whant i don,t know is how to call that class from my jsp and fill the dropdown. '// this will create my array public static ArrayList getBrandsMakes() { ArrayList arrayBrandsMake = new ArrayList(); while(rs.next()) { arrayBrandsMake.add(loadOB(rs)); // CARGO MI ARREGLO CON UN OBJETO } return arrayBrandsMake; } } //this will load my array object private static DropDownBrands loadOB(ResultSet rs)throws SQLException { DropDownBrands OB = new DropDownBrands (); OB.setBrands("BRAN"); return OB; } '

  Read the article

• Nested/Child TransactionScope Rollback

  - by Robert Wagner

  I am trying to nest TransactionScopes (.net 4.0) as you would nest Transactions in SQL Server, however it looks like they operate differently. I want my child transactions to be able to rollback if they fail, but allow the parent transaction to decide whether to commit/rollback the whole operation. A greatly simplified example of what I am trying to do: static void Main(string[] args) { using(var scope = new TransactionScope()) // Trn A { // Insert Data A DoWork(true); DoWork(false); // Rollback or Commit } } // This class is a few layers down static void DoWork(bool fail) { using(var scope = new TransactionScope()) // Trn B { // Update Data A if(!fail) { scope.Complete(); } } } I can't use the Suppress or RequiresNew options as Trn B relies on data inserted by Trn A. If I do use those options, Trn B is blocked by Trn A. Any ideas how I would get it to work, or if it is even possible using the System.Transactions namespace? Thanks

  Read the article

< Previous Page | 258 259 260 261 262 263 264 265 266 267 268 269  | Next Page >