Search Results

Search found 10211 results on 409 pages for 'adf controller'.

Page 263/409 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• Change from IDE to AHCI after installing Windows 8

  - by Louis

  I had my drive controller configured for IDE when I installed Windows 7. This didn't change when I upgraded to Windows 8. I now need to enable AHCI, but doing so causes Windows to fail to start. It doesn't know how to automatically fix the problem. I was able to use Regedit from the recovery area, in order to try using this fix that worked for Vista. That key is missing in Windows 8, however. I read that the relevant key is now in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci. But my settings already match the changes they suggest making. How can I get Windows to boot after enabling AHCI in the BIOS?

  Read the article

• Why is it that XCode cannot push my changes?

  - by Justin Case

  I am writing an iOS application in XCode. I associated a remote repository to it. I finished writing a View Controller file and then went to File - Source Control - Commit. I wrote a commit message. Oddly, every time I typed a space, an error popped up that read "1 of 2 files will be commited." I then tried to push the commit by clicking File - Source Control - Push. However, I get an error that notes that I have unsaved changes. Why? Didn't I just commit?

  Read the article

• Anyone know of a good way to sell used servers?

  - by RandyMorris

  We have a couple of servers we no longer need now that we are fully hosted on a managed host (rackspace). They were purchased for over $10,000 each but we realize that over time their monetary value drops. Anyone have suggestions or experience selling these in a proper way? They are dual xeon processor 2U rack mountable with 4+GB RAM, intel boards, 6x 72GB 15,000 RPM SCSI Drives with raid controller redundant power supply. We are in Southern California area. I can be more specific on any information if there is interest. I know there is ebay and the like but these servers are like the family dog that has to be given up and we are looking for a proper home for a fair price. I will end up auctioning it off if need be in the end though. Thanks in advanced for any help!

  Read the article

• Defragment an Exchange Volume

  - by IceMage

  The Scenario: I use a dedicated volume (RAID volume) to store all of my data for my Exchange 2007 server. Today, out of curiosity, I decided to check up on how fragmented the files on this data volume were. To my surprise, the answer is extremely. So, a three part question: First and Foremost, SHOULD I defragment this volume (after a full backup of course)? Be specific as to why not if I should not, or reasons I absolutely should if I should. Second, about how much time should I allow for during this maintenance period per gigabyte. The drives are all 7200 RPM SATA drives on a Hardware RAID 5 controller (Perc 5i/6i, can't remember), the files are extremely fragmented. (Over 5000 file fragments per gigabyte). Third, is there something wrong here? It seems to me like the drive shouldn't be this fragmented. Could something be configured incorrectly that could be causing this to happen?

  Read the article

• Cannot set MemOpMode or ProcVirtualization with syscfg.exe

  - by EGr

  When attempting to set MemOpMode or ProcVirtualization with syscfg.exe, I get the following error: C:\Users\EGr>syscfg --MemOpMode=AdvEccMode System Services or CSIOR disabled In the past, I have been told that this can be resolved by forcefully reinstalling the Dell Lifecycle controller firmware, and then trying again; however, I cannot find my notes on how to do that. Has anyone ever run into this issue, and does anyone know how I can fix it? If it is possible to forcefully reinstall the firmware, how would I do that? I've tried running the installer, but it fails after running for ~2 min. I believe there is a way to fix this as well, by adding/modifying a registry value at HKLM\System\Control\CurrentControlSet\Services\IPMIDRV (that might not be the correct path, but I know it is IPMIDRV). Is this a common issue? What is the actual cause of it?

  Read the article

• Windows NT workstation on AD domain

  - by Tom

  We run a Windows NT workstation connected to special manufacturing equipment, that everyone is deathly afraid to touch. It has custom software and special cards inside of the machine, making a rebuild impossible. The problem is, we are migrating to an AD domain from an NT domain, and this workstation stills needs access to storage on the network (AD computers). How should I go about doing this, after we get rid of our NT Domain controller? Upgrading to 2000 is not an option (so says management). I know, I know, if it dies we are in trouble. But that's managements choice, we just need to get rid of this NT domain.

  Read the article

• RAID Array performance on an HP Proliant ML350 G5 Smart Array E200i

  - by Nate Pinchot

  We have a client who is complaining about performance of an application which utilizes an MS SQL database. They do not believe the performance issues are the fault of the application itself. The Smart Array E200i RAID controller has 128MB cache and we have the cache set to 75% read/25% write. The disk array set to enable write caching. Recently we ran a disk performance test using SQLIO based on this guide. We used a 10 GB file for the test found that the average sequential read rate was ~60 MB/sec (megabytes/sec) and the average random read rate was ~30 MB/sec. Are these numbers on par for what the server should be performing? Better than on par? Horrible? Amazing?

  Read the article

• Boot Vista x64 with both ICH8 and ICH10 AHCI support

  - by adurity

  I have a situation where I need to boot Windows Vista 64-bit from both a ICH10 and ICH8 AHCI SATA controller. Currently, it is setup to boot from the ICH10, but when I try booting with the ICH8, I get the famed Windows STOP 7B BSOD. How can I add the ICH8 driver so that I can work around this BSOD and boot the system? I have updated to the latest Intel AHCI driver (8.9.0.1023 as of this post) which is supposed to support both chipsets, but I feel I am missing something.

  Read the article

• How do I resolve active directory connection errors when using dcpromo?

  - by Middletone

  When attempting to promote a secondary server to an existing active directory forest I receive the following error message and can no longer continue. Failed to examine the active directory forest. Value ridMasterDSA.partentDN not found What can cause this and what can be done to fix it? Both servers are 2008 running on x64 and can see each other on the network via their names. FYI: The firewall is turned off on both machines so there should be no issue there. Also the server that i'm adding is already a part of the domain. One server is already a domain controller but I want to add a second to it.

  Read the article

• Can DPM 2007 back up Active Directory?

  - by rbeier

  We're installing Microsoft Data Protection Manager 2007 - we'll be using it to back up Exchange and SQL Server among other things. Does anyone know if DPM can also back up Active Directory? It sounds like the answer is "not really". You can install the DPM agent on a domain controller and make system state backups. But if your Active Directory is out of commission, there will be no way to restore the backups, since DPM depends on AD. Currently we're just using Windows Backup (ntbackup) to take system state backups on one of the DCs. Should we just continue with that? Thanks, Richard

  Read the article

• Managing Active Directory Group Membership with a Non-Administrator Account In Server 2008

  - by Laranostz

  I am running Server 2008 R2 in an Active Directory Domain Environment. I have created a group in Active Directory and I have delegated management authority to that group to a user. I want this user to be able to add and remove accounts as needed from that group so that they are exercising some measurement of control without giving them other authority. When I have the user attempt to access the Active Directory Users & Computers Console it prompts them for Administrator credentials. They are using Remote Desktop to access the server, because they do not have Windows 7, and firewall rules prevent using the Remote Management Kit. I do not want to provide them with any level of Administrative rights except the minimum required for them to add/remove users from this group. There are two servers that 'talk' to each other in this isolated environment, a domain controller and a member server, both are only reachable through RDP. Any suggestions?

  Read the article

• ethernet not working

  - by good boy

  i wanted to know how do i setup an ethernet connection on a laptop,my isp gave me a telephone like cable which fits the ethernet port. i guess its the ethernet cable. when i connect it, nothing happens on the pc the ethernet card(realtek pcie gbe family controller) says cable not plugged in. i am using wired connection for first time.the system is completely stable with softwares .the drivers are also automatically updated through a manufacturer installed update system. the isp says there must be some sort of light on the port. whats the problem? how do get it working.

  Read the article

• Firewall Authentication - logon failed

  - by RoseofPurple

  I am attempting to use a Watchguard firebox 550e with Fireware XTM 11 to authenticate incoming traffic for RDP access. I have configured the firewall to use my domain controller for Active directory authentication with a Windows 2000 server farm and added a couple of user accounts to the users list in the firewall, but when I attempt to log onto the authentication page for the firewall, I get Logon failed. I know that the user names work and that the passwords are correct. I am also certain that I have told it to log on using Active Directory instead of the FireboxDB. I have tried using the username alone, the domain\username, and the email address. I believe that the Search base is correct (DC=mydomainname,DC=com), and I did not change any defaults for sAMAccountName (and I do not recall making any changes to those items when configuring the domain structure). Any assistance would be appreciated.

  Read the article

• How to make a pxe bootable 10MegaByte or larger dos image?

  - by rjt

  Would like to make a "massive" DOS floppy disk image, say 10MegaBytes or more containing all the firmware updates i need for any system, harddrive, BIOS. i do not need the DOS image to be networkable as everything will be on the PXE booted image, but networking would be nice. Since ZipDisks were attached to the floppy disk controller and were over 100MegaBytes, this should be possible. i tried a long time ago to do this and spent too much time on it only to have it fail to boot. So if someone has reliable instructions on how to create such a nightmarish beast and edit it, please let me know. One image that can used for PXE and copied to a USB stick would be a plus. Too bad manufacturers don't supply a single bootable Linux ISO containing all their firmware updates, that would be easy to boot over-the-lan and have networking. HP servers do this and it is awesome.

  Read the article

• Cant logon to domain over site-to-site vpn

  - by 3molo

  Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

  Read the article

• LSI SAS 1064E drivers for Server 2012

  - by rendentucson

  I have a need to place Windows Server 2012 onto a Sunfire X4100 blade server that contains a LSI SAS 1064e RAID controller (2006). The LSI site only has drivers up to server 2008 R2. I did attempt to install server 2012 hoping it might contain generic MS Drivers (I was dreaming, I know). That failed. I attempted to load external LSI drivers for server 2008. That failed as well. Am I out of luck, or did I miss something? Thanks in advance.

  Read the article

• Samba setup to request password reset on first time login

  - by crazybyte

  Is it possible to setup Samba to ask for password reset when the user first logs in without the need to setup a domain controller? Would this work properly with Windows clients or with clients using Linux with file managers like Krusader or Nautilus? Could somebody give me a few pointers how to implement this if is possible? I'm pretty new to Samba and I use it as a file server and I would like to have such a feature on it, but I'm not sure if it's possible. Thanks!

  Read the article

• SQL Server 2000 msdb database loading/suspect

  - by Blake Parcell

  My SQL Server recently suffered a raid controller/hard drive crash. After getting my hard drive problem corrected I soon found that some of my databases were (suspect) namely msdb. I am not a DBA by any means however am somewhat familiar with the daily SQL activities that happen on my server. So I restored from backup, and tried to bring my msdb database online. It is now forever stuck in (Loading\Suspect) and I am unable to script backups for my important databases. I can recreate all of the backup plans etc if i can somehow get a working msdb. Any help would be greatly appreciated. I am currently using: Microsoft SQL Server 2000 Version: 8.00.194

  Read the article

• Debian Lenny - network interfaces(eth) are in DOWN state

  - by pachanga

  Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

  Read the article

• Can I put a laptop Core i7 CPU in a desktop?

  - by Weezy

  One of the most important thing to me for a CPU is a good mix between speed and heat. For example five years ago I bought a Core 2 Duo 6300 (max TDP 65W): I put a big heatsink on the CPU, no fans (I do hate moving parts and noise) and it worked like a charm and very silently for five years (and it still work but five years later I wouldn't mind a faster CPU and a faster memory controller and more memory). I consider a max TDP of 130W unacceptable (like some high-end Core i7 have), for several reasons. So I was wondering: can I build a desktop and put a Core i7 CPU meant to be used in laptop in it? For example I was thinking about the Core i7 740QM (max TDP 45W [!]). Are these compatible with desktop Core i7 motherboards? (for example on NewEgg it says that the "CPU socket type" for the Core i7 740QM is PGA988, I've not too sure about what this is)

  Read the article

• Entering new user data into AD LDS

  - by Robert Koritnik

  I need some help configuring AD LDS (Active Directory Lightweight Directory Services). I'm not an administrator, have never configured domains and I don't have a clue how to add new users to existing domains. The thing is I need to develop an app on top of Sharepoint 2010 that must be connected to AD. I've chosen AD LDS because I can install it on Windows 7 and it acts as an active directory even though there's no domain controller present in the network. What I've done so far: I've installed AD LDS I've added a new instance with appication directory partition name DN=Air,DC=Watanabe,DC=pri I can connect to it using ADSI Edit and see all kinds of strange But now I don't know what to do? When it opens I can see the window below, but where's next? Can anybody give me some guidelines, how can I add domain users, so I can use them in my app AD required app?

  Read the article

• Log into another XP machine's SQL Server with a different userid? (WORKGROUP, not domain)

  - by Eric H.

  I have two machines at home, both XP Pro SP3. I have no domain controller, so they're both just in WORKGROUP. How can I, using Windows Authentication, log into an instance of SQL Server running on the other machine? Whenever I try it, it seems to try to login as 'Guest', even though I have entered the machine name (OTHER-DESKTOP), and login (OTHER-DESKTOP\otheruser) in the User Accounts Control Panel box. It works fine if I use sql server name and password, so I know the server is running. Any clues?

  Read the article

• X locks up with konqueror on comics.com

  - by retracile

  If I browse to comics.com using konqueror under KDE on Fedora 11, X will, after a delay, lock up. The mouse will move, but no keyboard input is recognized, and the screen does not react to the mouse passing over objects on screen. I am able to ssh into the machine and issue shutdown -r now and have that work. The machine is a Dell XPS M1330 with Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c), and Fedora 11 is fully updated. Visiting the same site in Firefox does not cause a lockup. I am booting with nomodeset since it won't boot into X otherwise. I tried the other two accel options: EXA (still locks up) and XAA (X won't start). Any suggestions on how I can debug this? bugzilla

  Read the article

• Determining who is running with administrator rights?

  - by Alex C.

  I work at a small non-profit organization with about 55 desktop PCs running Windows XP Pro. The domain controller is running Windows Server 2003. I have a two-part question (note that I'm a bit of a newb when it comes to network administration). Part 1: Is there some simple way that I can determine which accounts are logged in with administrator rights? Part 2: Is there a way that I can remove administrator rights from users without sitting down at each individual machine? Thanks for considering my questions.

  Read the article

• ESXi 4 failed to find boot device

  - by phil

  I had exsi 3.5 running just fine, the upgrade to 4 failed ( i thought it would so everything is backed up ). but it did boot just could not import the data store So i did a fresh install of ESXi 4. Now it says failed to find boot device. Not sure why. i have wiped the disk, the controller is a adaptec 3405, it worked fine in 3.5 and when i upgrade to 4 it did boot. Now it just hangs at loading vfat. then the failed to find boot device. Any ideas?

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >