Search Results

Search found 10388 results on 416 pages for 'hardware selection'.

Page 263/416 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• WD My Passport Essential SmartWare External Hard Drive

  - by Acer

  Hi Ive been gifted a My Passport SmartWare External Hard Drive(500gb). I used it and it works fine and installed WDSmartWare The Second time i used it,still fine,but I took it out without using the "Safely Remove Hardware" So the third time I used it,there's a bubble come out that says: USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.For assistance in solving the problem, click this message. I tried connecting it to other USB Ports but it didn't work I tried Uninstalling WDSmarWare and connect it but it didn't work Please help me I like this hard drive so much and I spoilt it easily XD P.S I think about 13% has been used up in the Hard Drive P.S.S Other USBs can work fine in the computer P.S.S.S I tried connecting it to other computer and works fine OMG

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

  Read the article

• Patch Management and System Inventory on a Windows network?

  - by Scott

  What are some good ways to have patch management and systems/hardware inventory for a Windows (Server 2003 or 2008) network? For example, at a minimum knowing the basics for all the machines out on the network such as OS version, patch level, what hotfixes they have, processor, ram, etc. Even better would be knowing more details such as peripherals. Ideally if there were a way to push service packs, and hotfixes (and other software?) to the machines, that would be great. What are some options for this?

  Read the article

• Backup strategy for Windows Server 2008 R2 and Hyper-V

  - by winserveradmin

  I am in the process of planning a Hyper-V deployment with SCVMM 2008 R2. I have several VMs on VMWare Player (temporary solution) for stuff like Sharepoint 2007, 2010, and a couple of other server apps. I want to develop a resilient backup plan for this. On the software side, Data Protection Manager 2010 will support all of the server apps I run (sQL Server 2008 R2, Sharepoint, Exchange, etc). But on the hardware side (storage), what is the best way to go? Drobo seems to have issues with Hyper-V juding by a few threads on here and doesn't support DPM 2010 (which is in beta anyway) but not even the 2007 version (see http://www.drobo.com/support/best_practices.php). What storage device would work well? Do I need a home server or just an external usb drive? Capacity wise, 2tb will probably be best so I can have a small archive and implement a round-robin system. Thanks

  Read the article

• Home ZFS based NAS...What processor/chipset to use?

  - by MrBlargityBlarg

  So, I'm building a home/personal NAS. My plan is to expose both SMB fileshares for sharing files/media between hosts, but also to carve an iSCSI target LUN out of it for use by VMWare as a datastore. I want to use ZFS (software RAID) so that means I'll either be using FreeNAS, Solaris Express, or OpenIndiana. My question is basically: How much horsepower do I need? Obviously I/O is going to be my bottleneck but I want to be sure that I am not limiting my I/O because of a slow processor or chipset. So far the hardware plan is to use an Intel i3 and motherboard with one of the H87, Q87, or Z87 chipsets, a SAS controller (JBOD, no RAID) and if budget allows, I'm also hoping to get an SSD for the ZFS L2ARC and ZIL. Does anyone think I could get away with an Intel Atom or cheaper/less-capable processor/chipset than the i3 and [HQZ]87 listed above?

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

• Load-balancer options

  - by toolkit

  I am looking at a number of possible options for load-balancing. So far, I am constrained to the following options: DNS server load-balancer, balancing to a cluster of tomcat servers, with terracotta for session replication. Pros - don't have to buy new kit. Cons - DNS lb can keep directing to a broken server. Hardware load-balancer, direct to cluster of tomcat servers. Pros - could have second box for failover lb. Cons - expense. Apache server load-balancer. Pros - apache's lb polls for broken servers. Cons - apache server is single point of failure, plus need to buy another server. Are there any other options I should consider? Thanks. Update: Thanks for all the answers so far +1's all round. Not accepting an answer yet, to keep more ideas coming.

  Read the article

• Inexpensive and Open replacement for Cisco Tunnel-based EasyVPN with Cisco VPN 3000 Series

  - by Shoaibi

  I have a scenario when i have to establish peer-to-peer preshared key based VPN to a vendor. This vendor uses Cisco EasyVPN with Cisco VPN 3000 as access concentrator. I check the compatibility of the type of VPN from http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/prod_brochure0900aecd80582078.pdf and it appears that it would only work on cisco hardware. I am looking for a less inexpensive and possibly and open replacement to this to save my cost and also recommend to them. I have tried OpenVPN and thinking about vyatta.

  Read the article

• Server Security

  - by mahatmanich

  I want to run my own root server (directly accessible from the web without a hardware firewall) with debian lenny, apache2, php5, mysql, postfix MTA, sftp (based on ssh) and maybe dns server. What measures/software would you recomend, and why, to secure this server down and minimalize the attack vector? Webapplications aside ... This is what I have so far: iptables (for gen. packet filtering) fail2ban (brute force attack defense) ssh (chang default, port disable root access) modsecurity - is really clumsy and a pain (any alternative here?) ?Sudo why should I use it? what is the advantage to normal user handling thinking about greensql for mysql www.greensql.net is tripwire worth looking at? snort? What am I missing? What is hot and what is not? Best practices? I like "KISS" - Keep it simple secure, I know it would be nice! Thanks in advance ...

  Read the article

• Connecting to Aerohive APs from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

• Is there any reason to subnet a home network?

  - by Will

  For networks I understand we set a netmask on each computer to let it know what IPs it can talk to without going through the router - IPs on the same subnet can talk directly to each other and do not have to go through a router/switch. However, in today's home networks (and I suspect corporate networks as well) every computer is connected to a router/switch (at the low cost of today's hardware I doubt there it much of a market for wired repeaters/hubs). This seems to obviate the need for a subnet mask and subnetting. Considering that in most modern home architectures every computer goes through the router, even to talk to computers on the same network, is there any reason for me to subnet a home network?

  Read the article

• IPSEC Windows 2008 <--> Fortinet 60B

  - by Elijah Glover

  I am trying to establish a IPSEC vpn, between an office DSL connection and a single virtual machine. I have done hub-spoke stuff before with cisco and fortinet routers, never hardware <-- software. Fortigate 60B - 10.20.1.1/24 Windows Server 2008 r2 Installed On VM I have seen some guides, to do this with juniper screenos (guide uses first release of 2008, they introduced windows firewall with advanced security), but none using fortinet equipment. Anyone ever been successful? Or should I install RAS/PPTP, so I can dial in?

  Read the article

• Using the option port on my Watchguard Firebox as a 2nd gateway exit point?

  - by Donovan

  I'm working on a network project in witch I have to design our network to provide two different exit points. The points are differentiated by the path through the corporate network. One of them travels through some monitoring hardware the other does not. We have a Watchguard Firebox in use as our gateway. Currently the network side provides the unmonitored exit point. I was wondering if i hooked the option port to our lan at a point that would force traffic through the monitored path, would it cause any problems? Access to the unmonitored gateway port would be restricted by ip. That would force all others not authorized to point to the monitored gateway port. I thought with the above design i might be able to get away with not having to buy another firebox to achieve the design I want. Thanks, D

  Read the article

• SAN newbie: What kind of fiber cables do I need to connect to the front end ports on my EMC CX300

  - by red888

  I have an old CX300 I'm messing with and I cant determine what kind of HBA\fiber cables I need to connect a server to the front end ports on the DPE2. The hardware reference doesn't give me any details and being new to FC-SAN all of the options are pretty overwhelming. I don't know if the ports are SC or LC or if it requires singlemode or multimode. Googling hasn't turned up anything for me either. All I know is that it supports 2GB Fiber. Here is a pic of one the modules. You can clearly see the front-end ports (FE)

  Read the article

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• Corrupt file indicative of corrupt hard drive?

  - by Elipsicon

  I have noticed that two files on my (almost full) 2 TB hard drive have been corrupted. One file has 20 kB (!) corrupted, i.e. consecutive 20 kB have changed, even though the modification date of the file hasn't changed and I haven't worked with this file for over a year. This tells me that something "below" the file system level has messed with the data and the only thing I can think of is hardware failure, most likely hard disk failure. I've tested my RAM already and it works flawlessly. I'm using ext4 on Linux, if that is of any help. Is this normal? Is it time to change my hard drive disk before something worse happens? What can I do to prevent that from happening in the future? Is there some built-in feature of, or extension to ext4 that includes additional error correcting code and/or watches files for changes that haven't been caused by the OS?

  Read the article

• Remote Desktop or Streaming Software/Services that Supports Gaming

  - by Griffin

  I've simply been amazed by the quality and speed of Onlive, as this technology has the potential of making hardware requirements irrelevant to the average user. However, at the moment Onlive is only for remotely controlling video games, and not desktops or other devices in general. I'm in pursuit of software or services that can accomplish this as well as Onlive does. I need: viewer (client) program portability (able to run on a USB stick) DirectX, OpenGL / full-screen game compatibility on the server side.** Gaming-acceptable color/scaling quality and responsiveness. I have a very powerful desktop at home and I want to be able to access this raw power from any other computer that I stick my USB into (in the same way Onlive gives gamers use of their powerful servers) What software/services has most of the above? NOTE: please specify what features your suggestion doesn't have.

  Read the article

• Speedup vmware esx guest hdd access

  - by Uwe

  Hello, we run several windows servers and windows clients on our vmware esx. One of the Windows 2003 Servers is a build-server with major HDD-reads/writes. as it is our build server. This machine was a hardware before and was virtualized to the ESX. Is there any way to increase the HDD-Performance? Perhaps there are special windows (guest) drivers? The files are stored on a Raid6 base. Performance graph of vmware infrastructure client shows reads up to 650 KBps and writes up to 4000 KBps. Thank you. Regards, Uwe

  Read the article

• How do i use storage spaces?

  - by Lucas

  I am planning on building a new windows 2012 server for a client and I have no experience in doing so. I have built many linux servers for them and setting up software raid during the install is a trivial matter. I have been unable to confirm that the windows 2012 install process has an analogous process for setting up Storage Spaces during the install. Can Storage Spaces be used as an installation target (configured during setup?) Is it capable of mirror+stripe (RAID10)? We have not ordered the hardware yet, so I'm looking for clarification.

  Read the article

• Can't download updates for reinstalled Office 2000 on WinXP OS "expected version not found" error message

  - by mpmadigan

  I replaced HD and reinstalled WinXP Pro and successfully downloaded all of the service packs and security updates. I've reinstalled my licensed version of Office 2000 (upgrade version from Office 97). The software installs and is functional; but when trying to install updates SR-1 or SR-1a or any individual security update I get error message "expected version of product not found". Microsoft no longer provides support for this legacy version of office. I can't find any support documents in Microsoft's database that addresses this issue. This is my sister's computer and I've already come out-of-pocket $100 for hardware (not counting the $$hours of labor). She only uses MS Word for minimal correspondence. No desire to spend $100+ for new version of Office. I would greatly appreciate any suggested fixes for this problem.

  Read the article

• Is it possible to rate-limit an scp/sftp/rsync/etc transfer from the command-line? ie, manual QoS on

  - by warren

  Specifically, I am looking to rate-limit an scp or sftp session (or other arbitrary network call) in the call itself. For example, let's say I want to copy 100MB to one server, and 1GB to another. I'd like to be able to run both of these at the same time, but maintain a QoS for "normal" computer usage - somewhat similar to how you can rate-limit bittorrent. Is there a way to do this without touching the networking hardware? I'm envisioning something akin to: magic-qos-tool 'scp file user@host:/path/to/file' Or.. scp -rate 40kbps file user@host:/path/to/file

  Read the article

• Where do I find a color profile for my MacBook Pro display?

  - by Jesse

  I installed Windows 7 on my MacBook Pro, overwriting OSX Lion. The screen has a blue tint due to lack of a calibrated color profile. I once used the "Color LCD" ICC profile from the OSX partition and it worked great, but I've since lost it since I decided to overwrite OSX completely. I tried the manual calibration in Windows 7 but I just can't seem to get it right like it was while using the color profile that was on the OSX partition. All Google tells me is where to find the ICC profile in OSX, and to copy it over. Do I have to reinstall OSX just for the color profile? Even if I do, where does the profile actually come from? Is it on the OSX disk, or is it somehow retrieved from the hardware itself? Is there a way to get it without reinstalling OSX? Thanks!

  Read the article

• How do I recover from a Linux CentOS 4.6 Operating System Crash

  - by Greg Omebije

  Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

  Read the article

• 3 monitors + a TV on a single card with Eyefinity?

  - by Paul Accisano

  Greetings all, Right now I have a fairly standard video card with 2 DVI ports, one powering my single monitor and another powering my HDTV (with a DVI-to-HDMI cable), which are in separate rooms. I never need to have my monitor and TV active at the same time. I'm looking into a possible computer upgrade. I'd like to know if the following situation is possible. I want three monitors on my desk powered by a single card, which I hear these new Eyefinity cards are capable of. But, I also want my TV hooked up. At any given time, I would want either my three monitors active or my TV active, never both at once. So it seems to me it might be possible to do this all a single 3-port card with a splitter of some kind. Is this possible? What hardware would I need? Thanks!

  Read the article

• MySQL 5.1.49 freezing every two days

  - by maximus

  Hi all, our mysql system is "freezing" every two days. By "freezing" i mean the following: it doesn't respond to ping we can't login with SSH we don't get any answer from MySQL there is no entry in the error logs! neither from linux neither from MySQL. we have already changed to a completely new hardware, we have the same problem, so it's definitely not a hardware problem. we do not have any other software installed except a firewall (iptables rule) we can restart the server from another server using rsyslog (www.rsyslog.com)(software reset) Could someone help me, by giving me some pointers what could i do to figure out the problem? I have included every detail about our settings. Thank you in advance for your help. Max. Our system parameters and settings: System-Memory: 12GB Processor: Intel 7-920 Quadcore Operating system: Debian 5 (lenny) 64bit MySQL 5.1.49 Databases: (a) a small phpbb forum (b) a 6GB database 3 tables with about 15 million rows my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = our-ip-address # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 256K thread_cache_size = 32 max_connections = 300 table_cache = 2048 #thread_concurrency = 4 # Used for InnoDB tables recommended to 50%-80% available memory innodb_buffer_pool_size = 6G # 20MB sometimes larger innodb_additional_mem_pool_size = 20M # 8M-16M is good for most situations innodb_log_buffer_size = 8M # Disable XA support because we do not use it innodb-support-xa = 0 # 1 is default wich is 100% secure but 2 offers better performance innodb_flush_log_at_trx_commit = 1 innodb_flush_method = O_DIRECT #innodb_thread_concurency = 8 # Recommended 64M - 512M depending on server size innodb_log_file_size = 512M # One file per table innodb_file_per_table # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M #query_cache_type = 1 #query_cache_min_res_unit= 2K #join_buffer_size = 1M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 log_bin = /var/log/mysql/mysql-bin.log # WARNING: Using expire_logs_days without bin_log crashes the server! See README.Debian! expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # * InnoDB plugin # As of MySQL 5.1.38, the InnoDB plugin from Oracle is included in the MySQL source code. # It has many improvements and better performances than the built-in InnoDB storage engine. # Please read http://www.innodb.com/products/innodb_plugin/ for more information. # Uncommenting the two following lines to use the InnoDB plugin. ignore_builtin_innodb plugin-load=innodb=ha_innodb_plugin.so # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # !includedir /etc/mysql/conf.d/ UPDATE After installing sysstat and configuring it to collect data after every minute i have the following datas. I used sar to generate the following output: The log-file is too big so coudn't enter it here but uploaded to box.net. The link is http://www.box.net/shared/xc6rh7qqob SECOND UPDATE We started a ping command in the background, and that solved the problem. Now the server does work since more then a week. We still don't know what's the problem.

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >