Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 263/1617 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

  • VPN service into 192 network

    - by tophersmith116
    I'm thinking about setting up a security testing lab. I work on a switched network, and that just makes for unnecessary headaches when doing testing. I'd like to create a 192 network with a few machines inside for DBs and AppServers etc. I will need a pivot machine that connects to both the outer network and the 192 (for automation purposes). But I'd like to be able to connect into the 192 network with my own machine from the outer network as the "attacking" machine (rather than have dedicated attack machines inside the 192 network). Therefore, I'd like to have the pivot server be a VPN server as well, so that my machine can VPN into the 192 network from the outer network. First off, is this even possible? Can I have a single computer with two NICs where a VPN service allows remote connections into the 192? Secondly, I'd like to have multiple outer clients connect to the VPN. Does anyone have any suggestions? I've used Hamachi well before, but I've also seen some good stuff from OpenVPN.

    Read the article

  • Conflicting ip routes with local table on attaching a virtual network interface

    - by user1071840
    I have an EC2 instance with these ip rules: $ sudo ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default I can attach an elastic network interface to it with a private IP. Say the IP of my machine is 10.1.3.12 and the IP of the interface is 10.1.1.190. As soon as I attach the interface to my machine a new entry is added to the routing policy and local routing table: sudo ip rule show 0: from all lookup local 32765: from 10.1.1.190 lookup 10003 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table local broadcast 10.1.1.0 dev eth3 proto kernel scope link src 10.1.1.190 local 10.1.1.190 dev eth3 proto kernel scope host src 10.1.1.190 broadcast 10.1.1.255 dev eth3 proto kernel scope link src 10.1.1.190 broadcast 10.1.3.0 dev eth0 proto kernel scope link src 10.1.3.12 local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 broadcast 10.1.3.255 dev eth0 proto kernel scope link src 10.1.3.12 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 I can send traffic to this ENI directly from a host that can have the same IP as the host the ENI is attached to. This is where the problem starts. I ran tcpdump on the port in question and saw multiple SYNs going to the ENI with src '10.1.3.12' and destination '10.1.1.190' but didn't see even a single ACK. In my understanding if ACKs were being sent from the ENI they'd have destination as 10.1.3.12 i.e. the same as the local machine's IP and such packets will now be routed as local packets matching local routing policy: local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 I'd like to send all the packets originating from 10.1.1.190 (my ENI) to go back on the same interface i.e. eth3 in this case. Contents of the nee table 10003 are: $ sudo ip route show table 10003 default via 10.1.1.1 dev eth3 I think I can do the following: I don't know if its possible but probably decrease the priority of local table so the packets match the table 10003. Use iptables to mangle these packets and update the local table route to include the mark information But I'm not sure if these are the right approaches.

    Read the article

  • How can I start hostednetwork on Windows 7?

    - by Pirozek
    When I type in admin console command to start hostednetwork netsh wlan start hostednetwork it gives me this: The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation. There is a hotfix from Microsoft but it didn't help me. Any advice? C:\Users\Pirozek>netsh wlan show driver Interface name: Wireless Network Connection 3 Driver : D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev .B) Vendor : Atheros Communications Inc. Provider : Atheros Communications Inc. Date : 8.7.2009 Version : 8.0.0.171 INF file : C:\Windows\INF\oem108.inf Files : 2 total C:\Windows\system32\DRIVERS\athrx.sys C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP Vendor defined TKIP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined CCMP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP

    Read the article

  • Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

    - by Javier
    I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

    Read the article

  • How to route local traffic over switch?

    - by Franz Kafka
    I'm just cabled up at home but haven't got any way of verifying that gigabit speed can be reached. As I've only got one laptop with one network card, one cable, and one switch, I'm kind of stuck. I'm using a tool that you can start as a server or as a client to send data from one box to another. I would like to send and receive on the same Windows box. I guess if I use my network local IP address, my Windows 8.1 PC will just route traffic internally. Is there some way of forcing the traffic to go to the switch and back again?

    Read the article

  • Ubuntu, connecting to WLAN

    - by Holly
    Hello, I successfully installed Ubuntu onto my usb hard drive. However, I'm not sure what the issue is with my internet. I'm not familiar enough with ubuntu to know whether this is a problem with recognizing my wireless card or with my internet, etc. So I suppose my question is, how do I tell whether it's recognizing my wireless card? (Network manager isn't showing any wireless signals, though I wasn't sure if it was supposed to. ) And, if it's not working, how do I go about troubleshooting that issue? Thanks!

    Read the article

  • Share internet connection in OSX through existing wireless network?

    - by baloo
    It's easy to share your Internet with AirPort by checking "Internet Sharing" in the system preferences, but this option asumes you want to create a new wireless network. Is there an easy way to configure Internet sharing if you want to use an already existing network? I want my laptop to use the existing wireless AP and share its internet to other clients within this network. Tried manually running natd -interface ppp0 without luck

    Read the article

  • How to setup wireless radio to network using 2 nics?

    - by CptanPanic
    I am having problems setting up this network, hopefully someone can help me. Laptop <- Wireless Radio <- ... - Wireless Radio <- CPU1( NIC1,NIC2) <- SWITCH <- CPU2 I have a computer with 2 NICs (CPU1). One goes to a wireless radio that connects to a wireless laptop, the other NIC goes to network switch. I can't connect Wireless Radio to switch due to space constraints. All the machines and radios are on same network addresses. I tried using Window's Bridge network which did allow Laptop to reach CPU2, but not CPU1. What is the way to get this to work so all the computers can talk to each other?

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • How can I port forward over a VPN NAT?

    - by Charlie
    I have a multi-site VPN currently running with pfSense boxes and currently using OpenVPN. However I can change the OS and VPN type if need be. The main router has a 10.13.0.0/16 subnet and a series of public IPs For example, a branch has a 10.12.1.0/24 subnet How can I port forward NAT traffic on a public IP of the main router to a server behind the NAT of the second? So for instance port 95 on a public IP assigned to the main router forwards to 10.12.1.102 on the other router. Is this even possible? Currently my setup works great but only for intertnal traffic

    Read the article

  • I have a wireless Canon P560 and my computer can't find it

    - by ed
    The printer is wireless and I haven't connected it via USB. I set the configurations for the Wi-Fi access point in the printer and it connected to my Wi-Fi. I have AT&T as the service provider and the 2Wire router. When I access the router in the browser I see that the printer is connected but when I run the software to detect the printer the computer can't find it. I have a Mac with Snow Leopard. I tried to detect the printer with another device and it can't find it. Is there a port that needs to be open for wireless printers? Because I tried putting the routers firewall settings for the device to its lowest and the computer still can't find it. Let me know. Thnx.

    Read the article

  • Setting up virtual network in VMware workstation

    - by Saif Bechan
    I am playing around with VMware workstation and am trying to set up a small virtual network. I am having a little trouble with this I hope somebody can help me out. I want to have all the different virtual machines to have different internal IP adresses so I can ping them SSH etc, from within my windows machine. I am directly connected to the internet without a router, so using a bridged connection does not seem to work. The other options NAT and host-only do not seem to work also. I think i need to create a new adapter. I am testing this out with a virtual image of linux debain 5.0 lenny. I have WMware Workstation 7 with virtual network editor. Can anyone guide me in the right direction.

    Read the article

  • Virtual box host-only adapter configuration

    - by Xoundboy
    I have VirtualBox 4 running on Win 7 with a Centos 6 guest VM set up for hosting my dev server. When I'm connected to my home network the guest can be accessed via a static IP address that I configured (192.168.56.2), but not when I'm in the office. I'm guessing that the DHCP server in the office doesn't have a gateway configured for the 192.168.56.x IP range. I read something about the VB host-only adapter that should allow me to set this guest VM up in such a way that I don't need to be on any network to be able to access the guest from the host using a static IP. I've not been able to find out exactly how to configure this though. Can anyone give me an example configuration, thanks. UPDATE: Thanks for your responses. I've now set up a single virtual network adapter in VirtualBox and set it to host-only: C:\Users\Ben>vboxmanage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: d419ef62-3c46-4525-ad2d-be506c90459a Dhcp: Disabled IPAddress: 192.168.56.2 NetworkMask: 255.255.255.0 IPV6Address: fe80:0000:0000:0000:78e3:b200:5af3:2a57 IPV6NetworkMaskPrefixLength: 64 HardwareAddress: 08:00:27:00:94:e8 MediumType: Ethernet Status: Up VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter On the guest I've set up eth0 to use the same IP address as the host-only adapter (192.168.56.2) but when I try to log in using Putty I still get "Network Error : connection refused". VirtualBox DHCP servier is enabled but I can't ping the gateway (192.168.56.1) from either host nor guest. There's no firewall running on either OS. What next?

    Read the article

  • windows cache not working as it should?

    - by piotrektt
    I run windows 2012 server with data center. The setup is with 60GB of RAM. I have one file shared on VHD and when I copy this file locally the RAM cache is all used up but when multiple computers connect to the share it the cache is not used. The network is 8Gb. The whole network is around 200 computers that need to read that one file but on this setup only 10 connection kills the server. Is there any way to check what is going on? What other solution can I use to manage cache in windows?

    Read the article

  • Cross-platform automatic adhoc wifi?

    - by marienbad
    I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

    Read the article

  • Download videos from youtube as I see it

    - by Sab
    This may seem a somewhat strange requirement : I want to download youtube videos as I see it. I know that I would have to capture the packets using a program like wireshark , and I do know that this is possible. So lets say I have 3 computers on my network and 1 smartphone. Lets say I view a youtube video on my phone. I now want this video to be recorded on any one of the computers so that I can see it later(record in the sense capture the packets so that I dont have to download it again and waste my bandwidth). Are there any programs which will do this for me? The reason I want this is I use IMediaShare to view youtube videos on my Tv. Now once I see a video if I want to see it at a later point of time I have to download the entire video again.

    Read the article

  • Benefits to private networks between virtual machines on an ESXi host?

    - by arex1337
    I'm planning this development environment with a few database servers, and originally thought I would have a few private networks. I then thought it might be unnecessary as the ESXi cluster already provides redundancy with 4 NICs (in my case) and should manage the network traffic pretty intelligently, right? Two private networks Zero private networks What are the advantages/disadvantages between the two shown configurations - on an ESXi 4.1 host?

    Read the article

  • How to make sure you server NIC performance is at best on Windows?

    - by Bobb
    I realised that I followed some obscure paper on setting NICs on Windows for too long. It might be outdated with new hardware released in past couple of years and with W2008R2. I read a bit about offloading and RSS settings on Windows and I realiased that it is very much circumstantial. Noone can really say - enable that and disable this. etc. So what I really want is for my next server try and setup testing environment and measure how my particular application will behave with different settings. The target is going to be latency of TCP primarily. Please note I am talking about latency inside the box. Are there precision tools for Windows to measure latency (down to microseconds)? P.S. I know this is not easy question. Windows time drift is awful problem for any precision test but still I am sure I am not the fist person to need that... Please share your experience

    Read the article

  • Share PC over network

    - by Sachin Verma
    I have a server installed on one local Win7 machine (say as 192.168.2.14:8080/myAPP) and I want to access that server from different computer (say ip as 192.168.2.16). Even they are connected to same network I can't access server from other computer. I guess the problem is in firewall. This is working when I disable firewall and not working when I allow certain ports in windows firewall but keeping firewall on (As a rule to allow incoming connections).

    Read the article

  • Inbound connections to a ubuntu machine running a VPN

    - by shanedowling
    Is it possible to open inbound connections to a machine connected to a VPN server? The machine is running ubuntu 9.10 with two network devices(a wireless card and ethernet port), I can connect to my machine locally using a local ip but when I try port forward using my router I can't connect from my external ip. Is there a way around this? I figure with 2 network devices I can vpn over one and use the other for inbound connections but I can't figure out how to do this. Thanks

    Read the article

  • How to set local alias for a machine?

    - by Alex G.
    I would like to set an alias on my local PC for a network machine. I know that it can be done by adding an entry in the hosts file as long as the IP address of the machine is also specified. However, the problem is that IPs are dynamically assigned by a DHCP server so I don't know for sure the IP address. Is there a way to define just an alias based on the machine's network name? P.S.: I'm running Windows Server 2008 R2.

    Read the article

  • good PCI-e Wireless card for Windows7?

    - by benwebdev
    Hi I've just build a 64bit Windows 7 PC but am unhappy with the piddly performance of the linksys USB wireless dingle I've used. Can anyone suggest a good PCIe alternative that will be stronger for connection and maybe faster. I dont see why my desktop should show a weaker performance on wireless than my laptop when its sat next to it or even my Palm Pre for that matter. any thoughts? UK based max around £60ish. thanks, Ben

    Read the article

  • Can a Linux system crash cause network issues?

    - by Supratik
    I have a Ubuntu box in my network which crashed, all the system connected to the switch in which the Ubuntu system was connected started giving problem. I removed that system from the network, since that was the last change I made in my network and everything was fine. So, to confirm this I again connected the system back to the network and the same network outage happened. When I checked the links it was fine. When I rebooted the problematic system and again connected back to the network switch everything started working. I think possibly the crash of the Ubuntu system could have caused this outage. Is there any possibility that a kernel crash can cause network issues?

    Read the article

  • Why is my wireless so slow compared to my wired download speed?

    - by Shawn
    I just used speedtest.net (using Firefox) to compare my wired connection speed with my wireless connection speed. With my current contract (with Videotron), I'm supposed to get Download speed: 8Mbps Upload speed: 1Mbps Here are the results of the speedtest.net test: Wired Ping: 14ms Download speed: 8.41Mbps Upload speed: 1.04Mbps Wireless Ping: 16ms Download speed: 0.18Mbps Upload speed: 0.98Mbps The difference in download speeds seems staggering to me since I did the test 1 meter aways from my router. Any clue as to why my wireless download speed is so low compared to my wired download speed? using Ubuntu 11.04 on an Acer Aspire 5536-5519 Oh and it might be worth mentioning that my girlfriend has no trouble at all with her wireless connection. No slowness at all. (She uses Firefox on Windows 7 on a Dell) Here's the results for the same test on her system: Ping: 22ms Download speed; 8.44Mbps Upload speed: 1.02Mbps

    Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >