Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 269/1617 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• How can I make VNC faster?

  - by NickAldwin

  I need to remotely access and use my work computer a few times a week. I want to use VNC because of the price. I've used VNC before, mostly on my own network, where it's fast. However, VNC over the internet is incredibly slow. Even at 256 colors and lower, with Aero turned off, it is unbearably slow. I recently used Ammyy Admin to connect to do something requiring a quick reaction time. Ammyy was really fast, with almost no lag, and it was running in full color with Aero on! How can I make VNC faster, like Ammyy is? I'd use Ammyy, but I would probably run into the 15hr/month limit pretty quickly. Any suggestions? [EDIT] I'm currently using UltraVNC.

  Read the article

• Connect to a particular network connection from terminal

  - by RanRag

  I am currently using Reliance netconnect USB modem. The problem I am facing is my USB modem disconnects itself at 22:00 PM IST everyday. Now, sometimes what I do is start some downloading and leave my laptop for 2-3 hours in this case if my network disconnects it is a problem for me. So, what I used to do in windows is make a python script and execute rasdial myconnection_name to automate the connection process in my absence. Now I want to achieve something similar in linux. So, what are my alternatives for rasdial like tool in linux to automatically connect to a particular connection . I am using ubuntu 12.04 and here is my nm-tool output.

  Read the article

• What is the best way to setup a heartbeat agent for failover between two VMs?

  - by EGr

  I have two VMs in VirtualBox that use NAT for their network adapters. They are both getting the same IP address, so I will need to reconfigure that; but knowing that, is it possible to set up a heartbeat agent to failover an apache server if one of the two VMs go down? The way I pictured it would be that the webserver would be able to be accessed externally via :80. No matter what VM was running, I would be able to access the website at that IP/port since failover would be setup. I'm running into trouble setting up IPs when the network adapters are set to NAT, and people have told me that I shouldn't be setting the IPs in this configuration. So what should I do to achieve what I'm looking for? Is it even feasible?

  Read the article

• problem on expand network using a router

  - by Jose

  I have a Netgear FS605 v3 router, and i'm trying to expand my network. The router is connected to the cable modem with cat5 cable. I have 2 laptop connected to the router but i'm only able to get internet connectivity in one. The first laptop i turn on, get the signal and the other one will show no connectivity. I have restarted all the devices many times but no luck. Can somebody explain me how to get this solved. Thanks.

  Read the article

• Oracle 11g network configuration

  - by Kylo

  Hi, I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• Newly installed DIR-615 - how to connect to the wireless?

  - by JK123

  I've just installed a D-Link DIR 615, but can't figure out how to connect to the wireless.. When I double click my wireless icon in the tray, it does show the new network. Its starts the "WiFi protected setup wizard" and the first thing it asks for is the "Device Ownership Password". I have no idea what that is - I've tried the PIN and the router password. On the next page it says: SSID: _(name)__ Security type: _wpa2 personal aes ccmp_ Password: _some long key that is not what I entered during router setup_ I change the key to the one I created when setting up the router. I've also tried leaving the key as it is shown in the dialog. But it does not connect either way. All it says is "Configuration failed" So how do I connect to the new wireless network??

  Read the article

• Cross subnet connection [closed]

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• What would cause my SendMail server not to acknowledge receiving a TCP Sequence?

  - by Mike B

  My TCP/IP Stack knowledge is a little rusty so please bear with me.... I have a CentOS 5.7 server with SendMail and am having seeing intermittent timeout issues sending email (particularly larger email) to other remote domains. It doesn't happen with all attachments or recipient domains. Just some. After some extended troubleshooting, I think I've narrowed it down to TCP Sequences not being acknowledged. Here's a breakdown of the TCP session from a packet capture I collected directly on my MTA (fooMTA): Packet 1 - 11: Standard TCP handshake followed by initial SMTP conversation. No errors. Packet #12 Recipient MTA: TCP sequence 231. Ack 91. Packet #13 FooMTA: TCP sequence 91. Ack 305. Packet #14 FooMTA: TCP sequence 1115. Ack 305. Packet #15 Recipient MTA: TCP sequence 305. Ack 2495. Packet #16 FooMTA: TCP sequence 2495. Ack 305. Packet #17 FooMTA: TCP sequence 5255. Ack 305. Packet #18: Recipient MTA: TCP sequence 305. Ack 5255. Packet #19: FooMTA: TCP sequence 6635. Ack 305. Packet #20: FooMTA: TCP sequence 8015. Ack 305. Packet #21: Recipient MTA: TCP Sequence 305. Ack 8015. Packet #22: FooMTA: TCP Sequence 10775. Ack 305. Packet #23: FooMTA: TCP Sequence 13535. Ack 305. Packet #24: Recipient MTA: TCP sequence 305. Ack 10775 Packet #25: FooMTA: TCP Sequence 14915. Ack 305 It keeps going like this with my server still thinking it hasn’t received sequence 305… in response the remote side eventually retransmits its prior data thinking that it never arrived. Eventually the gap gets so large that no new data is sent and the remote MTA keeps retransmitting old stuff. This contributes to an exponential backoff and eventually the remote side gives up. What’s strange to me is that I see the “missing” TCP sequence (305 in this case) arriving back to my server (via a packet capture collected directly from fooMTA) So I don’t get why my server keeps asking for it. Could this be firewall related? What would be the next step in troubleshooting?

  Read the article

• How to find malicious IPs?

  - by alfish

  Cacti shows irregular and pretty steady high bandwidth to my server (40x the normal) so I guess the server is udnder some sort of DDoS attack. The incoming bandwidth has not paralyzed my server, but of course consuming the bandwidth and affects performance so I am keen to figure out the possible culprits IPs add them to my deny list or otherwise counter them. When I run: netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n I get a long list of IPs with up to 400 connections each. I checked the most numerous occurring IPs but they come from my CDN. So I am wondering what is the best way to help monitor the requests that each IP make in order to pinpoint the malicious ones. I am using Ubuntu server. Thanks

  Read the article

• Do I need to create static routes for my home network?

  - by SZU

  50.x.x.x assigned by Frontier 192.168.1.1 Actiontec (FiosModem/Router) 192.168.1.2 Voip 192.168.1.3 DLINK/DIR615 (WirelesRouter) 192.168.1.3 assigned by Actiontec 192.168.2.1 DLINK DIR615 (Hardwired to Actiontec) 192.168.2.194 Android 192.168.2.195 Vista-PC1 192.168.2.196 WIN7-PC2 192.168.2.197 Linksys-1 WRT54G/DDWRT(WirelessClient) 192.168.2.198 Linksys-2 WRT54G/DDWRT(WirelessClient) 192.168.2.199 DSi 192.168.2.197 assigned by DLINK 192.168.3.1 Linksys-1 WRT54G/DDWRT 192.168.3.100 Vista-PC3 192.168.2.198 assigned by DLINK 192.168.4.1 Linksys-2 WRT54G/DDWRT 192.168.4.100 Ubuntu-PC4 Above is my current setup. All PCs have Internet access. PC3 and PC4 cannot see each other and PC1/PC2 cannot see PC3/PC4. Do I need static routes between PC3 & PC4, PC1/PC2 & PC3/PC4? If how do I create the static routes?

  Read the article

• Backtrack, Wi-Fi not working

  - by hradecek

  I've installed Backtrack 5R3 KDE, and I realized that my wireless is not working, but wired is working fine. Here's the lshw output: *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 05 serial: 04:7d:7b:b7:46:f8 size: 100MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:42 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB Controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB Controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)

  Read the article

• Server needs to ping outgoing before allowing connection

  - by QuintenVK

  Okay, first our setup: I'm currently working over VPN to a mac mini OSX 10.6 server. We have a testsetup VM running on that, using ubuntu 12.04. Earlier today, there was an outage because of which our mac mini server was reset. Since then, i was unable to initiate a connection to the VM (which i did boot) -- no ssh, no web, ... . I couldn't ssh or web from the mac mini to the vm either. I could do so from within the VM itself, though. Ping did work on all machines. Lastly, I tried pinging from the VM to my laptop. It took a moment, but then it finally started to ping (no timeouts or so). After that, web and ssh magically worked. I then didn't use the machine for about 5 minutes, after which i had to ping from the server to my laptop again before i could setup a connection. I'm in the dark on what this could be, though I think this is something to do with lookups.

  Read the article

• How to uploads to the web work on local networks

  - by Saif Bechan

  Let's say I have two computers hooked up as a home network. They both use the same router, and the router is hooked up to the to the net. Now lets say I am working on computer A, and I can access files on computer B. Computer A has a drive that is mounted on computer A as a network drive. Now I want to upload a file to a website. In the browser of computer A I open a browser, and go the website. On the website I select 'upload file', now in the file browser I go to the network drive, and select a file on computer B to upload. What happens in this case. Is the file uploaded directly from computer B to the website, or is the file first transferred to computer A, and then to the website.

  Read the article

• How to set up a home WEB server Ubuntu and test over LAN Windows 7 XAMPP Lampp

  - by thejartender

  I am looking for a guide on how to set up a local home server that will also be used as a web server. I have an old desktop with Ubuntu 12.10 and wish for this to be used as my central web and local server. I also have multiple Windows 7 systems at home that I wish to be part of this network and a wireless router. Can someone provide me with assistance on where to start (perhaps just the home network) or refer me to a guide on how to do this?

  Read the article

• How can I determine which switch the Infiniband subnet manager is running on?

  - by ajdecon

  I recently inherited an Infiniband network containing multiple switches, and I know that one of these switches is running the subnet manager. The rest supposedly have that feature turned off, or were never enabled. The trouble is, I have no idea which one it is... I'd like to replace the switch subnet manager with OpenSM running on a couple of my infrastructure servers. Is there any way, short of logging into each switch individually, to determine which switch is running the SM?

  Read the article

• How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

  - by Gizmo

  I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

  Read the article

• Proxmox: VMs and different public IPs

  - by Raj

  I have a server which has two NICs and both are directly connected to internet. I have five different public IP addresses available for the VMs. The host machine (Proxmox) doesn't need to use any (it'll use a private IP and that's all) but will have internet connection. I've gone through the Proxmox documentation and I'm not able to understand the big picture to set up the right network configuration for my needs. In short, what I have is: One server (Proxmox, host machine) On that server, 5 VMs are created 5 public IP addresses available (one for each VM), let's say: 80.123.21.1, 80.123.21.2, 80.123.21.3, 80.123.21.4, 80.123.21.5 What I have now for the host is the following: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.101 netmask 255.255.255.0 bridge_ports eth0 bridge_stp off bridge_fd 0 auto vmbr1 iface vmbr1 inet manual It can be reached from the internal network, so that's OK. It has internet connection, which is also OK. vmbr1 is going to be used by the VMs. Each VM will have its own IP on his network interfaces configuration file. For some reason, VMs will not have internet and they won't be able to have public IP address. If I use NAT, it will work correctly, but they will not use the public allocated IP addresses for them. Am I missing something?

  Read the article

• Software for monitoring web sites accessed via shared wireless connection?

  - by Anand

  Hi, I have shared my Internet connection to my neighbour using wireless network. Now I want to know what web sites he/she is accessing through my Internet connection. Please provide a list of free software that we can use to do this.

  Read the article

• Windows 7 - ICS - Xbox360

  - by Hailwood

  I am trying to connect my xbox360 to the internet through ICS using my laptop. I have done this a few days ago using the exact same hardware(so no hardware problems) The laptop can browse the internet. The laptop gets its settings though DHCP. I have enabled ICS on the Wireless connection (where the internet is coming from) I have set the xbox and the Wired connection on the laptop to obtain settings automatically. The issue is that the Wired connection only shows 'Unidentified Network'. What could i be doing wrong?

  Read the article

• Extremely poor WiFi reception on new desktop

  - by guy

  I just received a new desktop with a built-in WiFi card (Windows 7 Home Premium x64). However, I am only able to receive any WiFi signal when the computer is within 1-2 meters of a router. Even then, the signal is very weak (Windows 7 says it is "poor"). I have tried this with 2 different routers and see similar results. I have somewhere around a dozen other devices that can connect to both routers with greater signal strength (usually full strength) from much, much further away. When I tried calling support I was instructed to reinstall my drivers and attempt to change the WiFi channel of the router. Neither worked. I was then told that the problem was with my routers and that the computer was functioning normally and that it was certainly not a hardware problem. What would be the cause of this and is there anything I can do to fix it?

  Read the article

• Windows can't communicate with the device or resource (primary DNS server)

  - by David

  I am using Windows 7 Home Premium and am connecting to the Internet through Homeplug. When I connect and enable the LAN the status shows that I'm connected (the IPv4 shows connected), but after like 20 seconds it changes to No Internet connection. Even when it says I'm connected I can't connect to the Internet. My browser (Firefox) shows Server Not Found. When I run the troubleshooter it says "Windows can't communicate with the device or resource (primary DNS server)." What could be the problem, and how do I fix it?

  Read the article

• Can't connect to the internet in Windows Vista

  - by Kola

  I have a Windows Vista computer which i have used for about 2 years without any issues. Recently, i started having problems connecting to the internet with this Vista computer. My other XP Computers are fine and can connect to the Internet. Regardless of wired or wireless connection, i am unable to get the Vista computer connected to the web. The Status remains "Limited" for IPv4 and IPv6. It also shows unidentified Public Network, and is able to connect to the router. However, there's a disconnection between the router and the internet. Any help will be greatly appreciated, i have been on this for 4 weeks now.

  Read the article

• Wireless slow, but very odd

  - by Logman

  I have a HP Pavilion dv6 laptop, internet through the wireless timeouts. Even though it connects fine to the AP/router. The computer had a virus (searchnu?) and I backed up the usual and restored the laptop to factory image. Problem is after the restore the internet through the wireless the same still... and connected via wired and everything worked fine. I was able to update the whole system. Internet worked perfect, speed great. But the wireless still was pitiful. Ping tests with wireless are interesting: Google= 18ms Gmail= 18ms Yahoo= 1023ms 8.8.8.8=30ms Microsoft= Request Timed Out Bing= Request Timed Out msn= Request Timed Out even though I get 18ms with google, the pages take a long time to load. Is this a root kit? is it the wireless card in the laptop?

  Read the article

• Windows 7 'Unidentified Network'

  - by Throdne

  So my internet was working last night before I went to bed and woke up to a computer that is showing unidentified network. I have tried multiple ways of fixing it. > route delete 0.0.0.0 > uninstalling drivers - restart - reinstall from downloaded drivers > ipconfig /release - /renew > static IP > speed & duplex from auto negotiation to 1.0gbps full duplex > and also changed my network address to no value to 1234567890ab (not in that order) nothing seems to work. I have Comcast internet and when I connect the computer to the modem it works perfectly. but when I connect it to my router again, Unidentified network. I know my router isn't faulty, because my macbook pro, server, NAS, iPhones, and iPads are still working. I have also tried moving the port on the router, still same problem. my router is a: Cisco Small Business RVS4000 motherboard: GIGABYTE GA-990FXA-UD3

  Read the article

• How do I create a script that checks if a computer is connected via wireless or ethernet?

  - by user4941

  I am using log-me-in Central to look after a few dozen computers. These computers are used both for home use and work use. When the computers are used for work, they should not be connected via wireless. In the best case, I'd like to be able to use LogMeIn to prevents users on shift from connecting wirelessly. Still acceptable would be to have the computer email me if it connects wirelessly. If I knew how to set up a script that checks to see if the computer connected wirelessly and I could send an email, then I would be set.

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >