Search Results

Search found 25091 results on 1004 pages for 'mobile friendly website'.

Page 265/1004 | < Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >

  • cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

    - by Carlos Dunick
    Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

    Read the article

  • Browser Statistics for Geekswithblogs.net

    - by Jeff Julian
    I love Google Analytics!  It helps me so much during my day-to-day maintenance of Geekswithblogs.net and our other sites.  I can see so much data about our visitors and come up with new ways of delivering more content to our readers so they can really get the most out of our community.  Browsers and Browser Versions is a big indicator for me to help decide what we can support and what we need to be testing with.  The clear browsers of choice right now are Chrome, IE, and Firefox taking up 94.1%.  The next browser is Safari at 2.71%.  What this really brings to my attention besides I better test well with Chrome, Firefox, and IE is that we are definitely missing an opportunity with Mobile devices.  We really need to kick up the heat when it comes to a mobile presence with Geekswithblogs.net as a community and the blogs that are on this site.  We need easy discovery of new content and easy tracking of what I like.  I am definitely on mission to make this happen and it will be a phased approach, but I want to see these numbers changes since most of us have 2 or 3 mobile devices we use for Social activities, but tools are lacking for interacting with technical data besides RSS readers. Technorati Tags: Mobile,Geekswithblogs.net,Browsers

    Read the article

  • JDeveloper News &ndash; Did You Know

    - by shay.shmeltzer
    There have been a few issues lately with access to blogs.oracle.com to write new messages – and as a result I’m a little behind on reporting the latest and greatest in JDeveloper. (I’m also unable to approve comments :-( ) But just in case you missed it here are a few note worthy things you should know: ADF Mobile Client went production – this is a solution that let you use ADF to develop on-device applications for mobile devices. You develop once and run on various devices (right now Blackberry and Windows Mobile with other platforms coming soon). For more information check out the ADF Mobile page on OTN. ADF Developer Certification goes production – you can now take the official test and get an official certification that you can include in your resume.Should be a must for any consultant looking to get ADF related gigs. Learn more about the ADF Certification Exam. ADF Vision Stencils Released – If you are looking for a quick way to draw prototypes of ADF screens you probably can’t get any faster and more accurate results than this. This is a set of Vision components that you can drag over and design a page visually. You can also set properties for components and do other advance things. You do need a license for Visio to use this, but the ADF stencils are free. We’ve been using these internally at Oracle for some time now and we thought the ADF community would enjoy these too. Download the ADF Visio Stencils here (and watch a youtube demo of how they work).

    Read the article

  • Can I use my prepaid phone balance (in pesos) to buy from the Software Centre?

    - by obetus
    Using local network broadband, we can use it to buy games and applications from load balance. Is there any possible ways to use it also in Ubuntu software Center? additional: I'm using mobile broadband for the internet connection,this broadband has a sim card and account number where you can download money from buying a prepaid card worth 100 pesos,300 pesos or 500 pesos, provided by our local network. We use this mobile broadband when there is no wifi connection. There are two kinds of mobile broadband, one is postpaid account and the other is prepaid account. I use prepaid account, this kind of account can load a money for transaction like data plans, from 10 pesos for 30 minutes internet connection or 200 pesos for 5 days internet connection., and this prepaid account can load 5 pesos up to thousands of pesos. Now, if this prepaid mobile broadband can provide money in pesos and has internet connection, I think it can also use it for buying goods or applications or games via internet. i think its only need a software that can detect the sim card number and the money balance for transactions. Sorry for my bad english but I hope you got my point.

    Read the article

  • How to build an API on top of an existing Rails app with NodeJs and what architecture to use?

    - by javiayala
    The explanation I was recently hired by a company that has an old RoR 2.3 application with more than 100k users, a strong SEO strategy with more than 170k indexed urls, native android and ios applications and other custom-made mobile and web applications that rely on a not so good API from the same RoR app. They recently merged with a company from another country as an strategy to grow the business and the profit. They have almost the same stats, a similar strategy and mobile apps. We have just decided that we need to merge the data from both companies and to start a new app from scratch since the RoR app is to old and heavily patched and the app from the other company was built with a custom PHP framework without any documentation. The only good news is that both databases are in MySQL and have a similar structure. The challenge I need to build a new version that: can handle a lot of traffic, preserves the SEO strategies of both companies, serve 2 different domains, and have a strong API that can support legacy mobile apps from both companies and be ready for a new set of native apps. I want to use RoR 3.2 for the main web apps and NodeJs with a Restful API. I know that I need to be very careful with the mobile apps and handle multiple versions of the API. I also think that I need to create a service that can handle a lot IO request since the apps is heavily used to create orders for restaurants at a certain time of the day. The questions With all this in mind: What type of architecture do you recommend me to follow? What gems or node packages do you think will work the best? How do I build a new rails app and keep using the same database structure? Should I use NodeJS to build an API or just build a new service with Ruby? I know that I'm asking to much from you guys, but please help me by answering any topic that you can or by pointing me on the right direction. All your comments and feedback will be extremely appreciated! Thanks!

    Read the article

  • Video quality too bad while playing (any) videos in Intel GM965/GL960 Integrated Graphics Controller Ubuntu 12.04

    - by Sukhdev
    I have searched blogs and forums, installed several drivers, but can't find a solution that can provide equivalent video quality as that of Windows 7. Kindly help. Video quality specially color is too bad while playing with any media player. Configuration details are: Ubuntu - 12.04 Intel Corporation Mobile GM965/GL960 Integrated The results of the following commands are a) sudo lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) b) find /dev -group video /dev/fb0 /dev/dri/card0 /dev/dri/controlD64 /dev/agpgart c) glxinfo | grep -i vendor server glx vendor string: SGI client glx vendor string: ATI OpenGL vendor string: Tungsten Graphics, Inc d) sudo lshw -C video *-display:0 description: VGA compatible controller product: Mobile GM965/GL960 Integrated Graphics Controller (primary) vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 0c width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fea00000-feafffff memory:e0000000-efffffff ioport:efe8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile GM965/GL960 Integrated Graphics Controller (secondary) vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 0c width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:feb00000-febfffff I have spent days installing various drivers, and then un-installing but can't come up with a solution. Please help.

    Read the article

  • Anunciando: Grandes Melhorias para Web Sites da Windows Azure

    - by Leniel Macaferi
    Estou animado para anunciar algumas grandes melhorias para os Web Sites da Windows Azure que introduzimos no início deste verão.  As melhorias de hoje incluem: uma nova opção de hospedagem adaptável compartilhada de baixo custo, suporte a domínios personalizados para websites hospedados em modo compartilhado ou em modo reservado usando registros CNAME e A-Records (o último permitindo naked domains), suporte para deployment contínuo usando tanto CodePlex e GitHub, e a extensibilidade FastCGI. Todas essas melhorias estão agora online em produção e disponíveis para serem usadas imediatamente. Nova Camada Escalonável "Compartilhada" A Windows Azure permite que você implante e hospede até 10 websites em um ambiente gratuito e compartilhado com múltiplas aplicações. Você pode começar a desenvolver e testar websites sem nenhum custo usando este modo compartilhado (gratuito). O modo compartilhado suporta a capacidade de executar sites que servem até 165MB/dia de conteúdo (5GB/mês). Todas as capacidades que introduzimos em Junho com esta camada gratuita permanecem inalteradas com a atualização de hoje. Começando com o lançamento de hoje, você pode agora aumentar elasticamente seu website para além desta capacidade usando uma nova opção "shared" (compartilhada) de baixo custo (a qual estamos apresentando hoje), bem como pode usar a opção "reserved instance" (instância reservada) - a qual suportamos desde Junho. Aumentar a capacidade de qualquer um desses modos é fácil. Basta clicar na aba "scale" (aumentar a capacidade) do seu website dentro do Portal da Windows Azure, escolher a opção de modo de hospedagem que você deseja usar com ele, e clicar no botão "Salvar". Mudanças levam apenas alguns segundos para serem aplicadas e não requerem nenhum código para serem alteradas e também não requerem que a aplicação seja reimplantada/reinstalada: A seguir estão mais alguns detalhes sobre a nova opção "shared" (compartilhada), bem como a opção existente "reserved" (reservada): Modo Compartilhado Com o lançamento de hoje, estamos introduzindo um novo modo de hospedagem de baixo custo "compartilhado" para Web Sites da Windows Azure. Um website em execução no modo compartilhado é implantado/instalado em um ambiente de hospedagem compartilhado com várias outras aplicações. Ao contrário da opção de modo free (gratuito), um web-site no modo compartilhado não tem quotas/limite máximo para a quantidade de largura de banda que o mesmo pode servir. Os primeiros 5 GB/mês de banda que você servir com uma website compartilhado é grátis, e então você passará a pagar a taxa padrão "pay as you go" (pague pelo que utilizar) da largura de banda de saída da Windows Azure quando a banda de saída ultrapassar os 5 GB. Um website em execução no modo compartilhado agora também suporta a capacidade de mapear múltiplos nomes de domínio DNS personalizados, usando ambos CNAMEs e A-records para tanto. O novo suporte A-record que estamos introduzindo com o lançamento de hoje oferece a possibilidade para você suportar "naked domains" (domínios nús - sem o www) com seus web-sites (por exemplo, http://microsoft.com além de http://www.microsoft.com). Nós também, no futuro, permitiremos SSL baseada em SNI como um recurso nativo nos websites que rodam em modo compartilhado (esta funcionalidade não é suportada com o lançamento de hoje - mas chagará mais tarde ainda este ano, para ambos as opções de hospedagem - compartilhada e reservada). Você paga por um website no modo compartilhado utilizando o modelo padrão "pay as you go" que suportamos com outros recursos da Windows Azure (ou seja, sem custos iniciais, e você só paga pelas horas nas quais o recurso estiver ativo). Um web-site em execução no modo compartilhado custa apenas 1,3 centavos/hora durante este período de preview (isso dá uma média de $ 9.36/mês ou R$ 19,00/mês - dólar a R$ 2,03 em 17-Setembro-2012) Modo Reservado Além de executar sites em modo compartilhado, também suportamos a execução dos mesmos dentro de uma instância reservada. Quando rodando em modo de instância reservada, seus sites terão a garantia de serem executados de maneira isolada dentro de sua própria VM (virtual machine - máquina virtual) Pequena, Média ou Grande (o que significa que, nenhum outro cliente da Windows azure terá suas aplicações sendo executadas dentro de sua VM. Somente as suas aplicações). Você pode executar qualquer número de websites dentro de uma máquina virtual, e não existem quotas para limites de CPU ou memória. Você pode executar seus sites usando uma única VM de instância reservada, ou pode aumentar a capacidade tendo várias instâncias (por exemplo, 2 VMs de médio porte, etc.). Dimensionar para cima ou para baixo é fácil - basta selecionar a VM da instância "reservada" dentro da aba "scale" no Portal da Windows Azure, escolher o tamanho da VM que você quer, o número de instâncias que você deseja executar e clicar em salvar. As alterações têm efeito em segundos: Ao contrário do modo compartilhado, não há custo por site quando se roda no modo reservado. Em vez disso, você só paga pelas instâncias de VMs reservadas que você usar - e você pode executar qualquer número de websites que você quiser dentro delas, sem custo adicional (por exemplo, você pode executar um único site dentro de uma instância de VM reservada ou 100 websites dentro dela com o mesmo custo). VMs de instâncias reservadas têm um custo inicial de $ 8 cents/hora ou R$ 16 centavos/hora para uma pequena VM reservada. Dimensionamento Elástico para Cima/para Baixo Os Web Sites da Windows Azure permitem que você dimensione para cima ou para baixo a sua capacidade dentro de segundos. Isso permite que você implante um site usando a opção de modo compartilhado, para começar, e em seguida, dinamicamente aumente a capacidade usando a opção de modo reservado somente quando você precisar - sem que você tenha que alterar qualquer código ou reimplantar sua aplicação. Se o tráfego do seu site diminuir, você pode diminuir o número de instâncias reservadas que você estiver usando, ou voltar para a camada de modo compartilhado - tudo em segundos e sem ter que mudar o código, reimplantar a aplicação ou ajustar os mapeamentos de DNS. Você também pode usar o "Dashboard" (Painel de Controle) dentro do Portal da Windows Azure para facilmente monitorar a carga do seu site em tempo real (ele mostra não apenas as solicitações/segundo e a largura de banda consumida, mas também estatísticas como a utilização de CPU e memória). Devido ao modelo de preços "pay as you go" da Windows Azure, você só paga a capacidade de computação que você usar em uma determinada hora. Assim, se o seu site está funcionando a maior parte do mês em modo compartilhado (a $ 1.3 cents/hora ou R$ 2,64 centavos/hora), mas há um final de semana em que ele fica muito popular e você decide aumentar sua capacidade colocando-o em modo reservado para que seja executado em sua própria VM dedicada (a $ 8 cents/hora ou R$ 16 centavos/hora), você só terá que pagar os centavos/hora adicionais para as horas em que o site estiver sendo executado no modo reservado. Você não precisa pagar nenhum custo inicial para habilitar isso, e uma vez que você retornar seu site para o modo compartilhado, você voltará a pagar $ 1.3 cents/hora ou R$ 2,64 centavos/hora). Isto faz com que essa opção seja super flexível e de baixo custo. Suporte Melhorado para Domínio Personalizado Web sites em execução no modo "compartilhado" ou no modo "reservado" suportam a habilidade de terem nomes personalizados (host names) associados a eles (por exemplo www.mysitename.com). Você pode associar múltiplos domínios personalizados para cada Web Site da Windows Azure. Com o lançamento de hoje estamos introduzindo suporte para registros A-Records (um recurso muito pedido pelos usuários). Com o suporte a A-Record, agora você pode associar domínios 'naked' ao seu Web Site da Windows Azure - ou seja, em vez de ter que usar www.mysitename.com você pode simplesmente usar mysitename.com (sem o prefixo www). Tendo em vista que você pode mapear vários domínios para um único site, você pode, opcionalmente, permitir ambos domínios (com www e a versão 'naked') para um site (e então usar uma regra de reescrita de URL/redirecionamento (em Inglês) para evitar problemas de SEO). Nós também melhoramos a interface do usuário para o gerenciamento de domínios personalizados dentro do Portal da Windows Azure como parte do lançamento de hoje. Clicando no botão "Manage Domains" (Gerenciar Domínios) na bandeja na parte inferior do portal agora traz uma interface de usuário personalizada que torna fácil gerenciar/configurar os domínios: Como parte dessa atualização nós também tornamos significativamente mais suave/mais fácil validar a posse de domínios personalizados, e também tornamos mais fácil alternar entre sites/domínios existentes para Web Sites da Windows Azure, sem que o website fique fora do ar. Suporte a Deployment (Implantação) contínua com Git e CodePlex ou GitHub Um dos recursos mais populares que lançamos no início deste verão foi o suporte para a publicação de sites diretamente para a Windows Azure usando sistemas de controle de código como TFS e Git. Esse recurso fornece uma maneira muito poderosa para gerenciar as implantações/instalações da aplicação usando controle de código. É realmente fácil ativar este recurso através da página do dashboard de um web site: A opção TFS que lançamos no início deste verão oferece uma solução de implantação contínua muito rica que permite automatizar os builds e a execução de testes unitários a cada vez que você atualizar o repositório do seu website, e em seguida, se os testes forem bem sucedidos, a aplicação é automaticamente publicada/implantada na Windows Azure. Com o lançamento de hoje, estamos expandindo nosso suporte Git para também permitir cenários de implantação contínua integrando esse suporte com projetos hospedados no CodePlex e no GitHub. Este suporte está habilitado para todos os web-sites (incluindo os que usam o modo "free" (gratuito)). A partir de hoje, quando você escolher o link "Set up Git publishing" (Configurar publicação Git) na página do dashboard de um website, você verá duas opções adicionais quando a publicação baseada em Git estiver habilitada para o web-site: Você pode clicar em qualquer um dos links "Deploy from my CodePlex project" (Implantar a partir do meu projeto no CodePlex) ou "Deploy from my GitHub project"  (Implantar a partir do meu projeto no GitHub) para seguir um simples passo a passo para configurar uma conexão entre o seu website e um repositório de código que você hospeda no CodePlex ou no GitHub. Uma vez que essa conexão é estabelecida, o CodePlex ou o GitHub automaticamente notificará a Windows Azure a cada vez que um checkin ocorrer. Isso fará com que a Windows Azure faça o download do código e compile/implante a nova versão da sua aplicação automaticamente.  Os dois vídeos a seguir (em Inglês) mostram quão fácil é permitir esse fluxo de trabalho ao implantar uma app inicial e logo em seguida fazer uma alteração na mesma: Habilitando Implantação Contínua com os Websites da Windows Azure e CodePlex (2 minutos) Habilitando Implantação Contínua com os Websites da Windows Azure e GitHub (2 minutos) Esta abordagem permite um fluxo de trabalho de implantação contínua realmente limpo, e torna muito mais fácil suportar um ambiente de desenvolvimento em equipe usando Git: Nota: o lançamento de hoje suporta estabelecer conexões com repositórios públicos do GitHub/CodePlex. Suporte para repositórios privados será habitado em poucas semanas. Suporte para Múltiplos Branches (Ramos de Desenvolvimento) Anteriormente, nós somente suportávamos implantar o código que estava localizado no branch 'master' do repositório Git. Muitas vezes, porém, os desenvolvedores querem implantar a partir de branches alternativos (por exemplo, um branch de teste ou um branch com uma versão futura da aplicação). Este é agora um cenário suportado - tanto com projetos locais baseados no git, bem como com projetos ligados ao CodePlex ou GitHub. Isto permite uma variedade de cenários úteis. Por exemplo, agora você pode ter dois web-sites - um em "produção" e um outro para "testes" - ambos ligados ao mesmo repositório no CodePlex ou no GitHub. Você pode configurar um dos websites de forma que ele sempre baixe o que estiver presente no branch master, e que o outro website sempre baixe o que estiver no branch de testes. Isto permite uma maneira muito limpa para habilitar o teste final de seu site antes que ele entre em produção. Este vídeo de 1 minuto (em Inglês) demonstra como configurar qual branch usar com um web-site. Resumo Os recursos mostrados acima estão agora ao vivo em produção e disponíveis para uso imediato. Se você ainda não tem uma conta da Windows Azure, você pode inscrever-se em um teste gratuito para começar a usar estes recursos hoje mesmo. Visite o O Centro de Desenvolvedores da Windows Azure (em Inglês) para saber mais sobre como criar aplicações para serem usadas na nuvem. Nós teremos ainda mais novos recursos e melhorias chegando nas próximas semanas - incluindo suporte para os recentes lançamentos do Windows Server 2012 e .NET 4.5 (habilitaremos novas imagens de web e work roles com o Windows Server 2012 e NET 4.5 no próximo mês). Fique de olho no meu blog para detalhes assim que esses novos recursos ficarem disponíveis. Espero que ajude, - Scott P.S. Além do blog, eu também estou utilizando o Twitter para atualizações rápidas e para compartilhar links. Siga-me em: twitter.com/ScottGu Texto traduzido do post original por Leniel Macaferi.

    Read the article

  • Azure, don't give me multiple VMs, give me one elastic VM

    - by FransBouma
    Yesterday, Microsoft revealed new major features for Windows Azure (see ScottGu's post). It all looks shiny and great, but after reading most of the material describing the new features, I still find the overall idea behind all of it flawed: why should I care on how much VMs my web app runs? Isn't that a problem to solve for the Windows Azure engineers / software? And what if I need the file system, why can't I simply get a virtual filesystem ? To illustrate my point, let's use a real example: a product website with a customer system/database and next to it a support site with accompanying database. Both are written in .NET, using ASP.NET and use a SQL Server database each. The product website offers files to download by customers, very simple. You have a couple of options to host these websites: Buy a server, place it in a rack at an ISP and run the sites on that server Use 'shared hosting' with an ISP, which means your sites' appdomains are running on the same machine, as well as the files stored, and the databases are hosted in the same server as the other shared databases. Hire a VM, install your OS of choice at an ISP, and host the sites on that VM, basically the same as the first option, except you don't have a physical server At some cloud-vendor, either host the sites 'shared' or in a VM. See above. With all of those options, scalability is a problem, even the cloud-based ones, though not due to the same reasons: The physical server solution has the obvious problem that if you need more power, you need to buy a bigger server or more servers which requires you to add replication and other overhead Shared hosting solutions are almost always capped on memory usage / traffic and database size: if your sites get too big, you have to move out of the shared hosting environment and start over with one of the other solutions The VM solution, be it a VM at an ISP or 'in the cloud' at e.g. Windows Azure or Amazon, in theory allows scaling out by simply instantiating more VMs, however that too introduces the same overhead problems as with the physical servers: suddenly more than 1 instance runs your sites. If a cloud vendor offers its services in the form of VMs, you won't gain much over having a VM at some ISP: the main problems you have to work around are still there: when you spin up more than one VM, your application must be completely stateless at any moment, including the DB sub system, because what's in memory in instance 1 might not be in memory in instance 2. This might sounds trivial but it's not. A lot of the websites out there started rather small: they were perfectly runnable on a single machine with normal memory and CPU power. After all, you don't need a big machine to run a website with even thousands of users a day. Moving these sites to a multi-VM environment will cause a problem: all the in-memory state they use, all the multi-page transitions they use while keeping state across the transition, they can't do that anymore like they did that on a single machine: state is something of the past, you have to store every byte of state in either a DB or in a viewstate or in a cookie somewhere so with the next request, all state information is available through the request, as nothing is kept in-memory. Our example uses a bunch of files in a file system. Using multiple VMs will require that these files move to a cloud storage system which is mounted in each VM so we don't have to store the files on each VM. This might require different file paths, but this change should be minor. What's perhaps less minor is the maintenance procedure in place on the new type of cloud storage used: instead of ftp-ing into a VM, you might have to update the files using different ways / tools. All in all this makes moving an existing website which was written for an environment that's based around a VM (namely .NET with its CLR) overly cumbersome and problematic: it forces you to refactor your website system to be able to be used 'in the cloud', which is caused by the limited way how e.g. Windows Azure offers its cloud services: in blocks of VMs. Offer a scalable, flexible VM which extends with my needs Instead, cloud vendors should offer simply one VM to me. On that VM I run the websites, store my DB and my files. As it's a virtual machine, how this machine is actually ran on physical hardware (e.g. partitioned), I don't care, as that's the problem for the cloud vendor to solve. If I need more resources, e.g. I have more traffic to my server, way more visitors per day, the VM stretches, like I bought a bigger box. This frees me from the problem which comes with multiple VMs: I don't have any refactoring to do at all: I can simply build my website as if it runs on my local hardware server, upload it to the VM offered by the cloud vendor, install it on the VM and I'm done. "But that might require changes to windows!" Yes, but Microsoft is Windows. Windows Azure is their service, they can make whatever change to what they offer to make it look like it's windows. Yet, they're stuck, like Amazon, in thinking in VMs, which forces developers to 'think ahead' and gamble whether they would need to migrate to a cloud with multiple VMs in the future or not. Which comes down to: gamble whether they should invest time in code / architecture which they might never need. (YAGNI anyone?) So the VM we're talking about, is that a low-level VM which runs a guest OS, or is that VM a different kind of VM? The flexible VM: .NET's CLR ? My example websites are ASP.NET based, which means they run inside a .NET appdomain, on the .NET CLR, which is a VM. The only physical OS resource the sites need is the file system, however this too is accessed through .NET. In short: all the websites see is what .NET allows the websites to see, the world as the websites know it is what .NET shows them and lets them access. How the .NET appdomain is run physically, that's the concern of .NET, not mine. This begs the question why Windows Azure doesn't offer virtual appdomains? Or better: .NET environments which look like one machine but could be physically multiple machines. In such an environment, no change has to be made to the websites to migrate them from a local machine or own server to the cloud to get proper scaling: the .NET VM will simply scale with the need: more memory needed, more CPU power needed, it stretches. What it offers to the application running inside the appdomain is simply increasing, but not fragmented: all resources are available to the application: this means that the problem of how to scale is back to where it should be: with the cloud vendor. "Yeah, great, but what about the databases?" The .NET application communicates with the database server through a .NET ADO.NET provider. Where the database is located is not a problem of the appdomain: the ADO.NET provider has to solve that. I.o.w.: we can host the databases in an environment which offers itself as a single resource and is accessible through one connection string without replication overhead on the outside, and use that environment inside the .NET VM as if it was a single DB. But what about memory replication and other problems? This environment isn't simple, at least not for the cloud vendor. But it is simple for the customer who wants to run his sites in that cloud: no work needed. No refactoring needed of existing code. Upload it, run it. Perhaps I'm dreaming and what I described above isn't possible. Yet, I think if cloud vendors don't move into that direction, what they're offering isn't interesting: it doesn't solve a problem at all, it simply offers a way to instantiate more VMs with the guest OS of choice at the cost of me needing to refactor my website code so it can run in the straight jacket form factor dictated by the cloud vendor. Let's not kid ourselves here: most of us developers will never build a website which needs a truck load of VMs to run it: almost all websites created by developers can run on just a few VMs at most. Yet, the most expensive change is right at the start: moving from one to two VMs. As soon as you have refactored your website code to run across multiple VMs, adding another one is just as easy as clicking a mouse button. But that first step, that's the problem here and as it's right there at the beginning of scaling the website, it's particularly strange that cloud vendors refuse to solve that problem and leave it to the developers to solve that. Which makes migrating 'to the cloud' particularly expensive.

    Read the article

  • Is Financial Inclusion an Obligation or an Opportunity for Banks?

    - by tushar.chitra
    Why should banks care about financial inclusion? First, the statistics, I think this will set the tone for this blog post. There are close to 2.5 billion people who are excluded from the banking stream and out of this, 2.2 billion people are from the continents of Africa, Latin America and Asia (McKinsey on Society: Global Financial Inclusion). However, this is not just a third-world phenomenon. According to Federal Deposit Insurance Corp (FDIC), in the US, post 2008 financial crisis, one family out of five has either opted out of the banking system or has been moved out (American Banker). Moving this huge unbanked population into mainstream banking is both an opportunity and a challenge for banks. An obvious opportunity is the significant untapped customer base that banks can target, so is the positive brand equity a bank can build by fulfilling its social responsibilities. Also, as banks target the cost-conscious unbanked customer, they will be forced to look at ways to offer cost-effective products and services, necessitating technology upgrades and innovations. However, cost is not the only hurdle in increasing the adoption of banking services. The potential users need to be convinced of the benefits of banking and banks will also face stiff competition from unorganized players. Finally, the banks will have to believe in the viability of this business opportunity, and not treat financial inclusion as an obligation. In what ways can banks target the unbanked For financial inclusion to be a success, banks should adopt innovative business models to develop products that address the stated and unstated needs of the unbanked population and also design delivery channels that are cost effective and viable in the long run. Through business correspondents and facilitators In rural and remote areas, one of the major hurdles in increasing banking penetration is connectivity and accessibility to banking services, which makes last mile inclusion a daunting challenge. To address this, banks can avail the services of business correspondents or facilitators. This model allows banks to establish greater connectivity through a trusted and reliable intermediary. In India, for instance, banks can leverage the local Kirana stores (the mom & pop stores) to service rural and remote areas. With a supportive nudge from the central bank, the commercial banks can enlist these shop owners as business correspondents to increase their reach. Since these neighborhood stores are acquainted with the local population, they can help banks manage the KYC norms, besides serving as a conduit for remittance. Banks also have an opportunity over a period of time to cross-sell other financial products such as micro insurance, mutual funds and pension products through these correspondents. To exercise greater operational control over the business correspondents, banks can also adopt a combination of branch and business correspondent models to deliver financial inclusion. Through mobile devices According to a 2012 world bank report on financial inclusion, out of a world population of 7 billion, over 5 billion or 70% have mobile phones and only 2 billion or 30% have a bank account. What this means for banks is that there is scope for them to leverage this phenomenal growth in mobile usage to serve the unbanked population. Banks can use mobile technology to service the basic banking requirements of their customers with no frills accounts, effectively bringing down the cost per transaction. As I had discussed in my earlier post on mobile payments, though non-traditional players have taken the lead in P2P mobile payments, banks still hold an edge in terms of infrastructure and reliability. Through crowd-funding According to the Crowdfunding Industry Report by Massolution, the global crowdfunding industry raised $2.7 billion in 2012, and is projected to grow to $5.1 billion in 2013. With credit policies becoming tighter and banks becoming more circumspect in terms of loan disbursals, crowdfunding has emerged as an alternative channel for lending. Typically, these initiatives target the unbanked population by offering small loans that are unviable for larger banks. Though a significant proportion of crowdfunding initiatives globally are run by non-banking institutions, banks are also venturing into this space. The next step towards inclusive finance Banks by themselves cannot make financial inclusion a success. There is a need for a whole ecosystem that is supportive of this mission. The policy makers, that include the regulators and government bodies, must be in sync, the IT solution providers must put on their thinking caps to come out with innovative products and solutions, communication channels such as internet and mobile need to expand their reach, and the media and the public need to play an active part. The other challenge for financial inclusion is from the banks themselves. While it is true that financial inclusion will unleash a hitherto hugely untapped market, the normal banking model may be found wanting because of issues such as flexibility, convenience and reliability. The business will be viable only when there is a focus on increasing the usage of existing infrastructure and that is possible when the banks can offer the entire range of products and services to the large number of users of essential banking services. Apart from these challenges, banks will also have to quickly master and replicate the business model to extend their reach to the remotest regions in their respective geographies. They will need to ensure that the transactions deliver a viable business benefit to the bank. For tapping cross-sell opportunities, banks will have to quickly roll-out customized and segment-specific products. The bank staff should be brought in sync with the business plan by convincing them of the viability of the business model and the need for a business correspondent delivery model. Banks, in collaboration with the government and NGOs, will have to run an extensive financial literacy program to educate the unbanked about the benefits of banking. Finally, with the growing importance of retail banking and with many unconventional players eyeing the opportunity in payments and other lucrative areas of banking, banks need to understand the importance of micro and small branches. These micro and small branches can help banks increase their presence without a huge cost burden, provide bankers an opportunity to cross sell micro products and offer a window of opportunity for the large non-banked population to transact without any interference from intermediaries. These branches can also help diminish the role of the unorganized financial sector, such as local moneylenders and unregistered credit societies. This will also help banks build a brand awareness and loyalty among the users, which by itself has a cascading effect on the business operations, especially among the rural and un-banked centers. In conclusion, with the increasingly competitive banking sector facing frequent slowdowns and downturns, the unbanked population presents a huge opportunity for banks to enhance their customer base and fulfill their social responsibility.

    Read the article

  • Is it possible to expose an API for my own WebSite ... but use oAuth for the api authentication?

    - by Pure.Krome
    Hi Folks, currently I expose an api for my website. Works great .. and i use Basic Authentication to authenticate users to get access to the data. eg. http://www.MyWebSite.com <-- main site. http://api.MyWebSite.com <-- my api website. sample api RESTful url http://user1:[email protected]/games?type=battlefield2 (yes yes i know browsers stop people from putting in user1:pass1 (Basic Auth) into the url directly .. cause of security . but it's to highlight that we're using Basic Auth)). So .. how can i do this with oAuth?

    Read the article

  • IIS SSL Certificate Renewal Pain

    - by Rick Strahl
    I’m in the middle of my annual certificate renewal for the West Wind site and I can honestly say that I hate IIS’s certificate system.  When it works it’s fine, but when it doesn’t man can it be a pain. Because I deal with public certificates on my site merely once a year, and you have to perform the certificate dance just the right way, I seem to run into some sort of trouble every year, thinking that Microsoft surely must have addressed the issues I ran into previously – HA! Not so. Don’t ever use the Renew Certificate Feature in IIS! The first rule that I should have never forgotten is that certificate renewals in IIS (7 is what I’m using but I think it’s no different in 7.5 and 8), simply don’t work if you’re submitting to get a public certificate from a certificate authority. I use DNSimple for my DNS domain management and SSL certificates because they provide ridiculously easy domain management and good prices for SSL certs – especially wildcard certificates, which is what I use on west-wind.com. Certificates in IIS can be found pegged to the machine root. If you go into the IIS Manager, go to the machine root the tree and then click on certificates and you then get various certificate options: Both of these options create a new Certificate request (CSR), which is just a text file. But if you’re silly enough like me to click on the Renew button on your old certificate, you’ll find that you end up generating a very long Certificate Request that looks nothing like the original certificate request and the format that’s used for this is not accepted by most certificate authorities. While I’m not sure exactly what the problem is, it simply looks like IIS is respecting none of your original certificate bit size choices and is generating a huge certificate request that is 3 times the size of a ‘normal’ certificate request. The end result is (and I’ve done this at least twice now) is that the certificate processor is likely to fail processing those renewals. Always create a new Certificate While it’s a little more work and you have to remember how to fill out the certificate request properly, this is the safe way to make sure your certificate generates properly. First comes the Distinguished Name Properties dialog: Ah yes you have to love the nomenclature of this stuff. Distinguished name, Common name – WTF is a common name? It doesn’t look common to me! Make sure this form gets filled out correctly. Common NameThis is the domain name of the Web site. In my case I’m creating a wildcard certificate so I’m using the * prefix. If you’re purchasing a certificate for a specific domain use www.west-wind.com or store.west-wind.com for example. Make sure this matches the EXACT domain you’re trying to use secure access on because that’s all the certificate is going to work on unless you get a wildcard certificate. Organization Is the name of your company or organization. Depending on the kind of certificate you purchase this name will show up on your certificate. Most low end SSL certificates (ie. those that cost under $100 for single domains) don’t list the organization, the higher signature certificates that also require extensive validation by the cert authority do. Regardless you should make sure this matches the right company/organization. Organizational Unit This can be anything. Not really sure what this is for, but traditionally I’ve always set this to Web because – well this is a Web thing after all right? I’ve never seen this used anywhere that I can tell other than to internally reference the cert. State and CountryPretty obvious. Should reflect the location of the business/organization/person or site.   Next you have to configure the bit size used for the certificate: The default on this dialog is 1024, but I’ve found that most providers these days request a minimum bit length of 2048, as did my DNSimple provider. Again check with the provider when you submit to make sure. Bit length mismatches can cause problems if you use a size that isn’t supported by the provider. I had that happen last year when I submitted my CSR and it got rejected quite a bit later, when the certs usually are issued within an hour or less. When you’re done here, the certificate is saved to disk as a .txt file and it should look something like this (this is a 2048 bit length CSR):-----BEGIN NEW CERTIFICATE REQUEST----- MIIEVGCCAz0CAQAwdjELMAkGA1UEBhMCVVMxDzANBgNVBAgMBkhhd2FpaTENMAsG A1UEBwwEUGFpYTEfMB0GA1UECgwWV2VzdCBXaW5kIFRlY2hub2xvZ2llczEMMAoG B1UECwwDV2ViMRgwFgYDVQQDDA8qLndlc3Qtd2luZC5jb20wggEiMA0GCSqGSIb3 DQEBAQUAA4IBDwAwggEKAoIBAQDIPWOFMkMVRp2Ftj9w/cCVV4OYYhoZYtl+8lTk oqDwKca0xWHLgioX/9v0rZLS6a82MHqKEBxVXu+cuCmSE4AQtB/1YH9lS4tpc/be OZDvnTotP6l4MCEzzAfROcw4CiIg6X0RMSnl8IATAvv2V5LQM9TDdt9oDdMpX2IY +vVC9RZ7PMHBmR9kwI2i/lrKitzhQKaHgpmKcRlM6iqpALUiX28w5HJaDKK1MDHN 607tyFJLHijuJKx7PdTqZYf50KkC3NupfZ2avVycf18Q13jHWj59tvwEOczoVzRL l4LQivAqbhyiqMpWnrZunIOUZta5aGm+jo7O1knGWJjxuraTAgMBAAGgggGYMBoG CisGAQQBgjcNAgMxDBYKNi4yLjkyMDAuMjA0BgkrBgEEAYI3FRQxJzAlAgEFDAZS QVNYUFMMC1JBU1hQU1xSaWNrDAtJbmV0TWdyLmV4ZTByBgorBgEEAYI3DQICMWQw YgIBAR5aAE0AaQBjAHIAbwBzAG8AZgB0ACAAUgBTAEEAIABTAEMAaABhAG4AbgBl AGwAIABDAHIAeQBwAHQAbwBnAHIAYQBwAGgAaQBjACAAUAByAG8AdgBpAGQAZQBy AwEAMIHPBgkqhkiG9w0BCQ4xgcEwgb4wDgYDVR0PAQH/BAQDAgTwMBMGA1UdJQQM MAoGCCsGAQUFBwMBMHgGCSqGSIb3DQEJDwRrMGkwDgYIKoZIhvcNAwICAgCAMA4G CCqGSIb3DQMEAgIAgDALBglghkgBZQMEASowCwYJYIZIAWUDBAEtMAsGCWCGSAFl AwQBAjALBglghkgBZQMEAQUwBwYFKw4DAgcwCgYIKoZIhvcNAwcwHQYDVR0OBBYE FD/yOsTbXE+GVFCFMmldzQvyloz9MA0GCSqGSIb3DQEBBQUAA4IBAQCK6LlsCuIM 1AU0niB6QZ9v0FTsGFxP1dYvVUnJyY6VEKNiGFiQjZac7UCs0p58yScdXWEFOE8V OsjAYD3xYNc05+ckyD67UHRGEUAVB9RBvbKW23KeR/8kBmEzc8PemD52YOgExxAJ 57xWmAwEHAvbgYzQvhO8AOzH3TGvvHbg5UKM1pYgNmuwZq5DkL/IDoeIJwfk/wrI wghNTuxxIFgbH4YrgLgv4PRvrS/LaTCRBdboaCgzATMczaOb1nd/DVNR+3fCtMhM W0psTAjzRbmXF3nJyAQa7jF/52gkY0RfFX2lG5tJnG+XDsVNvKNvh9Qa5Tlmkm06 ILKCm9ciWCKk -----END NEW CERTIFICATE REQUEST----- You can take that certificate request and submit that to your certificate provider. Since this is base64 encoded you can typically just paste it into a text box on the submission page, or some providers will ask you to upload the CSR as a file. What does a Renewal look like? Note the length of the CSR will vary somewhat with key strength, but compare this to a renewal request that IIS generated from my existing site:-----BEGIN NEW CERTIFICATE REQUEST----- MIIPpwYFKoZIhvcNAQcCoIIPmDCCD5QCAQExCzAJBgUrDgMCGgUAMIIIqAYJKoZI hvcNAQcBoIIImQSCCJUwggiRMIIH+gIBADBdMSEwHwYDVQQLDBhEb21haW4gQ29u dHJvbCBWYWxpFGF0ZWQxHjAcBgNVBAsMFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEY MBYGA1UEAwwPKi53ZXN0LXdpbmQuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQCK4OuIOR18Wb8tNMGRZiD1c9X57b332Lj7DhbckFqLs0ys8kVDHrTXSj+T Ye9nmAvfPpZmBtE5p9qRNN79rUYugAdl+qEtE4IJe1bRfxXzcKa1SXa8+TEs3zQa zYSmcR2dDuC8om1eAdeCtt0NnkvANgm1VLwGOor/UHMASaEhCQIDAQABoIIG8jAa BgorBgEEAYI3DQIDMQwWCjYuMi45MjAwLjIwNAYJKwYBBAGCNxUUMScwJQIBBQwG UkFTWFBTDAtSQVNYUFNcUmljawwLSW5ldE1nci5leGUwZgYKKwYBBAGCNw0CAjFY MFYCAQIeTgBNAGkAYwByAG8AcwBvAGYAdAAgAFMAdAByAG8AbgBnACAAQwByAHkA cAB0AG8AZwByAGEAcABoAGkAYwAgAFAAcgBvAHYAaQBkAGUAcgMBADCCAQAGCSqG SIb3DQEJDjGB8jCB7zAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIwADA0BgNV HSUELTArBggrBgEFBQcDAQYIKwYBBQUHAwIGCisGAQQBgjcKAwMGCWCGSAGG+EIE ATBPBgNVHSAESDBGMDoGCysGAQQBsjEBAgIHMCswKQYIKwYBBQUHAgEWHWh0dHBz Oi8vc2VjdXJlLmNvbW9kby5jb20vQ1BTMAgGBmeBDAECATApBgNVHREEIjAggg8q Lndlc3Qtd2luZC5jb22CDXdlc3Qtd2luZC5jb20wHQYDVR0OBBYEFEVLAyO8gDiv lsfovKrx9mHPyrsiMIIFMAYJKwYBBAGCNw0BMYIFITCCBR0wggQFoAMCAQICEQDu 1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRsw GQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAY BgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wg Q0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUwNjA2MjM1OTU5WjBdMSEwHwYDVQQLExhE b21haW4gQ29udHJvbCBWYWxpZGF0ZWQxHjAcBgNVBAsTFUVzc2VudGlhbFNTTCBX aWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0LXdpbmQuY29tMIIBIjANBgkqhkiG9w0B AQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66XB51DlUfm6xXqJBcvMU2qorRHxC+WjEpB amvg8XoqNfCKzDAvLMbY4BLhbYCTagqtslnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJM CHufZ5RDtuTuxhTdJxzP9YqZUfKV5abWQp/TK6V1ryaBJvdqM73q4tRjrQODtkiR PfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8 UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+wDNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfO a7iZMVGbqDg6rkS//2uGe6tSQJTTs+mAZB+na+M8XT2UqwIDAQABo4IBwTCCAb0w HwYDVR0jBBgwFoAU2svqrVsIXcz//CZUzknlVcY49PgwHQYDVR0OBBYEFH0AmLiL RSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB/wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQG A1UdJQQtMCsGCCsGAQUFBwMBBggrBgEFBQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4 QgQBME8GA1UdIARIMEYwOgYLKwYBBAGyMQECAgcwKzApBggrBgEFBQcCARYdaHR0 cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9DUFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIw MKAuoCyGKmh0dHA6Ly9jcmwuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBLmNy bDBuBggrBgEFBQcBAQRiMGAwOAYIKwYBBQUHMAKGLGh0dHA6Ly9jcnQuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBXzIuY3J0MCQGCCsGAQUFBzABhhhodHRwOi8v b2NzcC5jb21vZG9jYS5jb20wKQYDVR0RBCIwIIIPKi53ZXN0LXdpbmQuY29tgg13 ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEBBQUAA4IBAQBqBfd6QHrxXsfgfKARG6np 8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8 YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXSsBxBdNz8RYTthPMu1h09C0XuDB30sztg nR692FrxJN5/bXsk+MC9nEweTFW/t2HW+XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lD csZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0tCbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk 9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlcrfFP2PK7XcEwWizsvMrNqLyvQVNXSUPT MA0GCSqGSIb3DQEBBQUAA4GBABt/NitwMzc5t22p5+zy4HXbVYzLEjesLH8/v0ot uLQ3kkG8tIWNh5RplxIxtilXt09H4Oxpo3fKUN0yw+E6WsBfg0sAF8pHNBdOJi48 azrQbt4HvKktQkGpgYFjLsormjF44SRtToLHlYycDHBNvjaBClUwMCq8HnwY6vDq xikRoIIFITCCBR0wggQFoAMCAQICEQDu1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3 DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0 ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVk MRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wgQ0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUw NjA2MjM1OTU5WjBdMSEwHwYDVQQLExhEb21haW4gQ29udHJvbCBWYWxpZGF0ZWQx HjAcBgNVBAsTFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0 LXdpbmQuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66X B51DlUfm6xXqJBcvMU2qorRHxC+WjEpBamvg8XoqNfCKzDAvLMbY4BLhbYCTagqt slnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJMCHufZ5RDtuTuxhTdJxzP9YqZUfKV5abW Qp/TK6V1ryaBJvdqM73q4tRjrQODtkiRPfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d 9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+w DNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfOa7iZMVGbqDg6rkS//2uGe6tSQJTTs+mA ZB+na+M8XT2UqwIDAQABo4IBwTCCAb0wHwYDVR0jBBgwFoAU2svqrVsIXcz//CZU zknlVcY49PgwHQYDVR0OBBYEFH0AmLiLRSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB /wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQGA1UdJQQtMCsGCCsGAQUFBwMBBggrBgEF BQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4QgQBME8GA1UdIARIMEYwOgYLKwYBBAGy MQECAgcwKzApBggrBgEFBQcCARYdaHR0cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9D UFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIwMKAuoCyGKmh0dHA6Ly9jcmwuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBLmNybDBuBggrBgEFBQcBAQRiMGAwOAYIKwYB BQUHMAKGLGh0dHA6Ly9jcnQuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBXzIu Y3J0MCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5jb21vZG9jYS5jb20wKQYDVR0R BCIwIIIPKi53ZXN0LXdpbmQuY29tgg13ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEB BQUAA4IBAQBqBfd6QHrxXsfgfKARG6np8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe 4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXS sBxBdNz8RYTthPMu1h09C0XuDB30sztgnR692FrxJN5/bXsk+MC9nEweTFW/t2HW +XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lDcsZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0t CbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlc rfFP2PK7XcEwWizsvMrNqLyvQVNXSUPTMYIBrzCCAasCAQEwgYcwcjELMAkGA1UE BhMCR0IxGzAZBgNVBAgTEkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4GA1UEBxMHU2Fs Zm9yZDEaMBgGA1UEChMRQ09NT0RPIENBIExpbWl0ZWQxGDAWBgNVBAMTD0Vzc2Vu dGlhbFNTTCBDQQIRAO7UTVPkm+2Sbks59IdptaUwCQYFKw4DAhoFADANBgkqhkiG 9w0BAQEFAASCAQB8PNQ6bYnQpWfkHyxnDuvNKw3wrqF2p7JMZm+SuN2qp3R2LpCR mW2LrGtQIm9Iob/QOYH+8houYNVdvsATGPXX2T8gzn+anof4tOG0vCTK1Bp9bwf9 MkRP+1c8RW/vkYmUW4X5/C+y3CZpMH5dDTaXBIpXFzjX/fxNpH/rvLzGiaYYL3Cn OLO+aOADr9qq5yoqwpiYCSfYNNYKTUNNGfYIidQwYtbHXEYhSukB2oR89xD2sZZ4 bOqFjUPgTa5SsERLDDeg3omMKiIXVYGxlqBEq51Kge6IQt4qQV9P9VgInW7cWmKe dTqNHI9ri3ttewdEnT++TKGKKfTjX9SR8Waj -----END NEW CERTIFICATE REQUEST----- Clearly there’s something very different between this an my original request! And it didn’t work. IIS creates a custom CSR that is encoded in a format that no certificate authority I’ve ever used uses. If you want the gory details of what’s in there look at this ServerFault question (thanks to Mika in the comments). In the end it doesn’t matter  though – no certificate authority knows what to do with this CSR. So create a new CSR and skip the renewal. Always! Use the same Server Keep in mind that on IIS at least you should always create your certificate on a single server and then when you receive the final certificate from your provider import it on that server. IIS tracks the CSR it created and requires it in order to import the final certificate properly. So if for some reason you try to install the certificate on another server, it won’t work. I’ve also run into trouble trying to install the same certificate twice – this time around I didn’t give my certificate the proper friendly name and IIS failed to allow me to assign the certificate to any of my Web sites. So I removed the certificate and tried to import again, only to find it failed the second time around. There are other ways to fix this, but in my case I had to have the certificate re-issued to work – not what you want to do. Regardless of what you do though, when you import make sure you do it right the first time by crossing all your t’s and dotting your i's– it’ll save you a lot of grief! You don’t actually have to use the server that the certificate gets installed on to generate the CSR and first install it, but it is generally a good idea to do so just so you can get the certificate installed into the right place right away. If you have access to the server where you need to install the certificate you might as well use it. But you can use another machine to generated the and install the certificate, then export the certificate and move it to another machine as needed. So you can use your Dev machine to create a certificate then export it and install it on a live server. More on installation and back up/export later. Installing the Certificate Once you’ve submitted a CSR request your provider will process the request and eventually issue you a new final certificate that contains another text file with the final key to import into your certificate store. IIS does this by combining the content in your certificate request with the original CSR. If all goes well your new certificate shows up in the certificate list and you’re ready to assign the certificate to your sites. Make sure you use a friendly name that matches domain name of your site. So use *.mysite.com or www.mysite.com or store.mysite.com to ensure IIS recognizes the certificate. I made the mistake of not naming my friendly name this way and found that IIS was unable to link my sites to my wildcard certificate. It needed to have the *. as part of the certificate otherwise the Hostname input field was blanked out. Changing the Friendly Name If you by accidentally used an invalid friendly name you can change it later in the Windows certificate store. Bring up a Run Box Type MMC File | Add/Remove Snap In Add Certificates | Computer Account | Local Computer Drill into Certificates | Personal | Certificates Find your Certificate | Right Click | Properties Edit the Friendly Name | Click OK Backing up your Certificate The first thing you should do once your certificate is successfully installed is to back it up! In case your server crashes or you otherwise lose your configuration this will ensure you have an easy way to recover and reinstall your certificate either on the same server or a different one. If you’re running a server farm or using a wildcard certificate you also need to get the certificate onto other machines and a PFX file import is the easiest way to do this. To back up your certificate select your certificate and choose Export from the context or sidebar menu: The Export Certificate option allows you to export a password protected binary file that you can import in a single step. You can copy the resulting binary PFX file to back up or copy to other machines to install on. Importing the certificate on another machine is as easy as pointing at the PFX file and specifying the password. IIS handles the rest. Assigning a new certificate to your Site Once you have the new certificate installed, all that’s left to do is assign it to your site. In IIS select your Web site and bring up the Site Bindings from the right sidebar. Add a new binding for https, bind it to port 443, specify your hostname and pick the certificate from the pick list. If you’re using a root site make sure to set up your certificate for www.yoursite.com and also for yoursite.com so that both work properly with SSL. Note that you need to explicitly configure each hostname for a certificate if you plan to use SSL. Luckily if you update your SSL certificate in the following year, IIS prompts you and asks whether you like to update all other sites that are using the existing cert to the newer cert. And you’re done. So what’s the Pain? So, all of this is old hat and it doesn’t look all that bad right? So what’s the pain here? Well if you follow the instructions and do everything right, then the process is about as straight forward as you would expect it to be. You create a cert request, you import it and assign it to your sites. That’s the basic steps and to be perfectly fair it works well – if nothing goes wrong. However, renewing tends to be the problem. The first unintuitive issue is that you simply shouldn’t renew but create a new CSR and generate your new certificate from that. Over the years I’ve fallen prey to the belief that Microsoft eventually will fix this so that the renewal creates the same type of CSR as the old cert, but apparently that will just never happen. Booo! The other problem I ran into is that I accidentally misnamed my imported certificate which in turn set off a chain of events that caused my originally issued certificate to become uninstallable. When I received my completed certificate I installed it and it installed just fine, but the friendly name was wrong. As a result IIS refused to assign the certificate to any of my host headered sites. That’s strike number one. Why the heck should the friendly name have any effect on the ability to attach the certificate??? Next I uninstalled the certificate because I figured that would be the easiest way to make sure I get it right. But I found that I could not reinstall my certificate. I kept getting these stop errors: "ASN1 bad tag value met" that would prevent the installation from completion. After searching around for this error and reading countless long messages on forums, I found that this error supposedly does not actually mean the install failed, but the list wouldn’t refresh. Commodo has this to say: Note: There is a known issue in IIS 7 giving the following error: "Cannot find the certificate request associated with this certificate file. A certificate request must be completed on the computer where it was created." You may also receive a message stating "ASN1 bad tag value met". If this is the same server that you generated the CSR on then, in most cases, the certificate is actually installed. Simply cancel the dialog and press "F5" to refresh the list of server certificates. If the new certificate is now in the list, you can continue with the next step. If it is not in the list, you will need to reissue your certificate using a new CSR (see our CSR creation instructions for IIS 7). After creating a new CSR, login to your Comodo account and click the 'replace' button for your certificate. Not sure if this issue is fixed in IIS 8 but that’s an insane bug to have crop up. As it turns out, in my case the refresh didn’t work and the certificate didn’t show up in the IIS list after the reinstall. In fact when looking at the certificate store I could see my certificate was installed in the right place, but the private key is missing which is most likely why IIS is not picking it up. It looks like IIS could not match the final cert to the original CSR generated. But again some sort of message to that affect might be helpful instead of ASN1 bad tag value met. Recovering the Private Key So it turns out my original problem was that I received the published key, but when I imported the private key was missing. There’s a relatively easy way to recover from this. If your certificate doesn’t show up in IIS check in the certificate store for the local machine (see steps above on how to bring this up). If you look at the certificate in Certificates/Personal/Certificates make sure you see the key as shown in the image below: if the key is missing it means that the certificate is missing the private key most likely. To fix a certificate you can do the following: Double click the certificate Go to the Details Tab Copy down the Serial number You can copy the serial number from the area blurred out above. The serial number will be in a format like ?00 a7 9b a1 a4 9d 91 63 57 d6 9f 26 b8 ee 79 b5 cb and you’ll need to strip out the spaces in order to use it in the next step. Next open up an Administrative command prompt and issue the following command: certutil -repairstore my 00a79ba1a49d916357d69f26b8ee79b5cb You should get a confirmation message that the repair worked. If you now go back to the certificate store you should now see the key icon show up on the certificate. Your certificate is fixed. Now go back into IIS Manager and refresh the list of certificates and if all goes well you should see all the certificates that showed in the cert store now: Remember – back up the key first then map to your site… Summary I deal with a lot of customers who run their own IIS servers, and I can’t tell you how often I hear about botched SSL installations. When I posted some of my issues on Twitter yesterday I got a hell storm of “me too” responses. I’m clearly not the only one, who’s run into this especially with renewals. I feel pretty comfortable with IIS configuration and I do a lot of it for support purposes, but the SSL configuration is one that never seems to go seamlessly. This blog post is meant as reminder to myself to read next time I do a renewal. So I can dot my i's and dash my t’s before I get caught in the mess I’m dealing with today. Hopefully some of you find this useful as well.© Rick Strahl, West Wind Technologies, 2005-2014Posted in IIS7  Security   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • What are the tradeoffs for using 'partial view models'?

    - by Kenny Evitt
    I've become aware of an itch due to some non-DRY code pertaining to view model classes in an (ASP.NET) MVC web application and I'm thinking of scratching my itch by organizing code in various 'partial view model' classes. By partial-view-model, I'm referring to a class like a view model class in an analogous way to how partial views are like views, i.e. a way to encapsulate common info and behavior. To strengthen the 'analogy', and to aid in visually organizing the code in my IDE, I was thinking of naming the partial-view-model classes with a _ prefix, e.g. _ParentItemViewModel. As a slightly more concrete example of why I'm thinking along these lines, imagine that I have a domain-model-entity class ParentItem and the user-friendly descriptive text that identifies these items to users is complex enough that I'd like to encapsulate that code in a method in a _ParentItemViewModel class, for which I can then include an object or a collection of objects of that class in all the view model classes for all the views that need to include a reference to a parent item, e.g. ChildItemViewModel can have a ParentItem property of the _ParentItemViewModel class type, so that in my ChildItemView view, I can use @Model.ParentItem.UserFriendlyDescription as desired, like breadcrumbs, links, etc. Edited 2014-02-06 09:56 -05 As a second example, imagine that I have entity classes SomeKindOfBatch, SomeKindOfBatchDetail, and SomeKindOfBatchDetailEvent, and a view model class and at least one view for each of those entities. Also, the example application covers a lot more than just some-kind-of-batches, so that it wouldn't really be useful or sensible to include info about a specific some-kind-of-batch in all of the project view model classes. But, like the above example, I have some code, say for generating a string for identifying a some-kind-of-batch in a user-friendly way, and I'd like to be able to use that in several views, say as breadcrumb text or text for a link. As a third example, I'll describe another pattern I'm currently using. I have a Contact entity class, but it's a fat class, with dozens of properties, and at least a dozen references to other fat classes. However, a lot of view model classes need properties for referencing a specific contact and most of those need other properties for collections of contacts, e.g. possible contacts to be referenced for some kind of relationship. Most of these view model classes only need a small fraction of all of the available contact info, basically just an ID and some kind of user-friendly description (i.e. a friendly name). It seems to be pretty useful to have a 'partial view model' class for contacts that all of these other view model classes can use. Maybe I'm just misunderstanding 'view model class' – I understand a view model class as always corresponding to a view. But maybe I'm assuming too much.

    Read the article

  • How to handle non-existent subdirectories?

    - by Question Overflow
    I have a dynamic website with friendly URLs. Example: Instead of /user.php?id=123, I have /user/123 Instead of /index.php?category=fishes, I have /fishes But, how do I handle non-existent subdirectories such as /about/123? Currently it gives a 200 success instead of a 404 not found error. Is there a way to deal with non-existent subdirectories in Apache config and at the same time allow for friendly URLs? Or do I have to handle this individually for each PHP script?

    Read the article

  • Are there any useful tools to mirror a mailman mailing list as a forum?

    - by mar10
    We have a mailman mailing list however as we all know this is not very user friendly in terms of searching the archives. I am looking at a way to enable the continued functionality of mailman while having a forum linked to it for a more friendly user-interface approach. Is there a forum application that lets you mirror the mailman service so that posts to mailman are sync'd into the forum and posts to the forum are sync'd to mailman?

    Read the article

  • cloud programming for OpenStack in C / C++

    - by Basile Starynkevitch
    (Sorry for such a fuzzy question, I am very newbie to cloud programming) I am interested in designing (and developing) a (free software) program in C or C++ (probably, most of it being meta-programmed, i.e. part of the C code code being generated). I am still in the thinking / designing phase. And I might perhaps give up. For reference, I am the main architect and implementor of GCC MELT, a domain specific language to extend the GCC compiler (the MELT language is translated to C/C++ and is bootstrapped: the MELT to C/C++ translator being written in MELT). And I am dreaming of extending it with some cloud computing abilities. But I am a newbie in cloud computing. (I am only interested in free-software, GPLv3 friendly, based cloud computing, which probably means openstack). I believe that "compiling on the cloud with some enhanced GCC" could make sense (for super-optimizations or static analysis of e.g. an entire Linux distribution, or at least a massive GCC compiled free software like Qt, GCC itself, or the Linux kernel). I'm dreaming of a MELT specific monitoring program which would store, communicate, and and enhance GCC compilation (extended by MELT). So the picture would be that each GCC process (actually the cc1 or cc1plus started by the gcc driver, suitably extended by some MELT extension) would communicate with some monitor. That "monitoring/persisting" program would run "on the cloud" (and probably manage some information produced by GCC e.g. on NoSQL bases). So, how should some (yet to be written) C program (some Linux daemon) be designed to be cloud-friendly? So far, I understood that it should provide some Web service, probably thru a RESTful service, so should use an HTTP server library like onion. And that OpenStack is able to start (e.g. a dozen of) such services. But I don't have a clear picture of what OpenStack brings. So far, I noticed the ability to manage (and distribute) virtual machines (with some Python API). It is less clear how can it distribute some ELF executable, how can it start it, etc. Do you have any references or examples of C / C++ programming on the cloud? How should a "cloud-friendly" (actually, OpenStack friendly) C/C++ server application be designed?

    Read the article

  • 5 Common Mistakes Made by Search Engine Optimization Companies

    Search engine optimization process or SEO is used for making the website search-friendly. The websites are made friendly not only for the search-engines, but also for those who search for products and services with the help of search-engines. There are 5 common mistakes which people make while optimizing the site. You should be aware that these mistakes can affect your ranking in the SE.

    Read the article

  • WebFoundations

    - by csharp-source.net
    A simple, SEO Friendly, C#, ASP.NET, XML Content Management System (CMS) These 'WebFoundations' are a great starting block when developing an ASP.NET CMS. Features: * A WYSIWYG editor (FCKEditor) * Content caching (No IO overhead) * Multi language support (can be set on querystring or dropdown) * Search engine friendly URL's (url rewriting) * Easily themable (Build on ASP.Net Master Pages) * An image gallery control (it consumes XML Picasa exports) Web Foundation sites can be hosted on inexpensive hosting as there is NO Database requirement (all the data is stored in XML files).

    Read the article

  • Panda Antivirus Pro 2012 and Secunia Windows Updater

    As with other offerings in the Panda Security portfolio, the core of Panda Antivirus Pro 2012's reliability comes from its innovative Collective Intelligence technology. This security model automatically analyzes, classifies, and fixes the approximately 73,000 files PandaLabs receives on a daily basis to offer users the highest protection possible against malware that is not only known, but also unknown. Best of all, the protection is provided with little impact on system performance to ensure a user-friendly experience. Speaking of user-friendly, Panda Antivirus Pro 2012 is described as the...

    Read the article

  • About MVVM

    - by samkea
    http://csharperimage.jeremylikness.com/ How to make Silverlight datagrid more user friendly.(http://weblogs.asp.net/alexeyzakharov/archive/2009/06/06/silverlight-tips-amp-tricks-make-silverlight-datagrid-be-more-mvvm-friendly.aspx) http://www.galasoft.ch/mvvm/sample1/

    Read the article

  • Toggle CNAME entries using PHP?

    - by skibulk
    Is it possible with PHP to dynamically toggle CNAME entries? For example I have two mirrors with media to be served on my website. Mirror 1 has a monthly bandwidth cap so upon reaching it I want to automatically toggle to mirror 2. I want to use CNAME because the resulting urls appear to be identical to search engines, an SEO friendly approach. If there are SEO friendly alternatives I'd like to hear them as well.

    Read the article

  • What WordPress Plugins Do I Need For Search Engine Optimization?

    By itself WordPress is a wonderful format, it is already search engine friendly and easy to use. But we all want more traffic which is why we need the help of search engines. With search engine optimization you make your website even more appealing and search engine friendly. This means search engines will like referring you and your blog.

    Read the article

  • Overwrite old hmtl - with new html -

    - by SolarAngellis
    there is some way to modify multiple html file in multiple folders ? I want to apply a new html design template over an old html website , the website it is quite big , and doing this manually will take me quite a long time for example , Template A and Template B website Template B it is a complete website , but i want a program to overwrite parts of the code , i need title / meta tags / and elements to remain , while the rest of the template will change i know about notepad++ but i don't know how to set it up to give me the right output

    Read the article

  • my.cnf for big wordpress installation

    - by adnan
    My website using wordpress with more than 150K posts & using auto posts publish feature with more than 2K daily posts I need to configure my.cnf settings to speed up my website actually the website speed is good but i have a problem with facebook sharing when I trying to share some link in facebook the link appears as this image http://elnhrda.com/facelink.jpg So I need to speed up my website by configure my.cnf I have VPS 4G.B RAM 300 HDD CENTOS6 x86_64 processor Intel Dual Xeon L5420 (8 x 2.5 GHz) this is my current my.cnf [mysqld] query_cache_size=512M skip-name-resolve innodb_file_per_table=1 query_cache_limit=32M any suggestions may be help

    Read the article

  • Streaming audio/video in a publicly-hosted server increases bandwith usage

    - by Eka
    I have a website hosted in a public server (withoud any streaming content) ,using public hosting instead of private because its cheaper. But in public hosting their are limitations when compared to private hosting such as monthly bandwidth usage (1 GB), disk space, cpu usage etc. I am planning to embedd videos and audios (from other websites like youtube) to my already existing website. My question is if a client streams a embedded video/audio (hosted in another website) from my website any change in bandwidth occurs.

    Read the article

< Previous Page | 261 262 263 264 265 266 267 268 269 270 271 272  | Next Page >