Search Results

Search found 32459 results on 1299 pages for 'internet connection'.

Page 266/1299 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• Configuring two subnets with two NICS. Access from a NAS to the internet

  - by archipestre

  I am having trouble configuring my NAS. I have a DSL router with WIFI (192.168.1.1) in my flatmates room. In my room I have a server with two NICS: 1) wlan0 (192.168.1.2) that connects to the DSL router via wireless 2) em1 (192.168.0.1) that connects to the NAS (192.168.0.20) with a crossover cable. I have Fedora 17 and I have enable packet forwarding. My IP configuration is as follows: WLAN0 inet 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255 EM1 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 My routing table looks like: Destination Gateway G enmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 em1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 I have enable a static route in the DSL server: Status Network Destination Subnet Mask Interface Gateway Remove Edit Active 192.168.0.0 255.255.255.0 LAN 192.168.1.2 From my server I can ping the DSL router and the NAS. From the NAS I can ping both NICS of the server. However the NAS is unable to ping the DSL router or any address in the Internet. Any idea of what is wrong. Thank you in advance

  Read the article

• Randomly unusable wireless connection. Oddest issue ever...

  - by Hallucynogenyc

  I have two desktop computers a laptop and a smartphone. All of them connect perfectly to my router (WRT54GL with Tomato firmware), but randomly (once a week maybe) something odd happens: For over an hour or so one of the desktop computers (Windows 7 Pro x64) will just refuse to connect properly to the router. Only that computer and only to that network. I can connect all the other machines to the router perfectly and I can connect properly to other networks with that machine. What I mean by "not being able to connect properly" I mean that the OS will just tell me "not able to connect to.." or that it will connect but then say that it has no Internet access or it connects but will then take minutes to load any website, even the router web interface. I've tried to change from WPA2 to WEP and back to WPA2, I've tried different network adapters (one internal PCI card and one USB external card), removing networks from Windows and adding again... without making any difference. It works for some days but at the end, it ends happening at some time. I just have no clue on what the hell could be going on here. I first thought it was the network adapter, then the router, then Windows... Thanks in advance

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• Checking who is connected to your server, with PowerShell.

  - by Fatherjack

  There are many occasions when, as a DBA, you want to see who is connected to your SQL Server, along with how they are connecting and what sort of activities they are carrying out. I’m going to look at a couple of ways of getting this information and compare the effort required and the results achieved of each. SQL Server comes with a couple of stored procedures to help with this sort of task – sp_who and its undocumented counterpart sp_who2. There is also the pumped up version of these called sp_whoisactive, written by Adam Machanic which does way more than these procedures. I wholly recommend you try it out if you don’t already know how it works. When it comes to serious interrogation of your SQL Server activity then it is absolutely indispensable. Anyway, back to the point of this blog, we are going to look at getting the information from sp_who2 for a remote server. I wrote this Powershell script a week or so ago and was quietly happy with it for a while. I’m relatively new to Powershell so forgive both my rather low threshold for entertainment and the fact that something so simple is a moderate achievement for me. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server # connection and query stuff         $ConnectionStr = "Server=$Server;Database=Master;Integrated Security=True" $Query = "EXEC sp_who2" $Connection = new-object system.Data.SQLClient.SQLConnection $Table = new-object "System.Data.DataTable" $Connection.connectionstring = $ConnectionStr try{ $Connection.open() $Command = $Connection.CreateCommand() $Command.commandtext = $Query $result = $Command.ExecuteReader() $Table.Load($result) } catch{ # Show error $error[0] | format-list -Force } $Title = "Data access processes (" + $Table.Rows.Count + ")" $Table | Out-GridView -Title $Title $Connection.close() So this is pretty straightforward, create an SMO object that represents our chosen server, define a connection to the database and a table object for the results when we get them, execute our query over the connection, load the results into our table object and then, if everything is error free display these results to the PowerShell grid viewer. The query simply gets the results of ‘EXEC sp_who2′ for us. Depending on how many connections there are will influence how long the query runs. The grid viewer lets me sort and search the results so it can be a pretty handy way to locate troublesome connections. Like I say, I was quite pleased with this, it seems a pretty simple script and was working well for me, I have added a few parameters to control the output and give me more specific details but then I see a script that uses the $SMOServer object itself to provide the process information and saves having to define the connection object and query specifications. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server $Processes = $SMOServer.EnumProcesses() $Title = "SMO processes (" + $Processes.Rows.Count + ")" $Processes | Out-GridView -Title $Title Create the SMO object of our server and then call the EnumProcesses method to get all the process information from the server. Staggeringly simple! The results are a little different though. Some columns are the same and we can see the same basic information so my first thought was to which runs faster – so that I can get my results more quickly and also so that I place less stress on my server(s). PowerShell comes with a great way of testing this – the Measure-Command function. All you have to do is wrap your piece of code in Measure-Command {[your code here]} and it will spit out the time taken to execute the code. So, I placed both of the above methods of getting SQL Server process connections in two Measure-Command wrappers and pressed F5! The Powershell console goes blank for a while as the code is executed internally when Measure-Command is used but the grid viewer windows appear and the console shows this. You can take the output from Measure-Command and format it for easier reading but in a simple comparison like this we can simply cross refer the TotalMilliseconds values from the two result sets to see how the two methods performed. The query execution method (running EXEC sp_who2 ) is the first set of timings and the SMO EnumProcesses is the second. I have run these on a variety of servers and while the results vary from execution to execution I have never seen the SMO version slower than the other. The difference has varied and the time for both has ranged from sub-second as we see above to almost 5 seconds on other systems. This difference, I would suggest is partly due to the cost overhead of having to construct the data connection and so on where as the SMO EnumProcesses method has the connection to the server already in place and just needs to call back the process information. There is also the difference in the data sets to consider. Let’s take a look at what we get and where the two methods differ Query execution method (sp_who2) SMO EnumProcesses Description - Urn What looks like an XML or JSON representation of the server name and the process ID SPID Spid The process ID Status Status The status of the process Login Login The login name of the user executing the command HostName Host The name of the computer where the  process originated BlkBy BlockingSpid The SPID of a process that is blocking this one DBName Database The database that this process is connected to Command Command The type of command that is executing CPUTime Cpu The CPU activity related to this process DiskIO - The Disk IO activity related to this process LastBatch - The time the last batch was executed from this process. ProgramName Program The application that is facilitating the process connection to the SQL Server. SPID1 - In my experience this is always the same value as SPID. REQUESTID - In my experience this is always 0 - Name In my experience this is always the same value as SPID and so could be seen as analogous to SPID1 from sp_who2 - MemUsage An indication of the memory used by this process but I don’t know what it is measured in (bytes, Kb, Mb…) - IsSystem True or False depending on whether the process is internal to the SQL Server instance or has been created by an external connection requesting data. - ExecutionContextID In my experience this is always 0 so could be analogous to REQUESTID from sp_who2. Please note, these are my own very brief descriptions of these columns, detail can be found from MSDN for columns in the sp_who results here http://msdn.microsoft.com/en-GB/library/ms174313.aspx. Where the columns are common then I would use that description, in other cases then the information returned is purely for interpretation by the reader. Rather annoyingly both result sets have useful information that the other doesn’t. sp_who2 returns Disk IO and LastBatch information which is really useful but the SMO processes method give you IsSystem and MemUsage which have their place in fault diagnosis methods too. So which is better? On reflection I think I prefer to use the sp_who2 method primarily but knowing that the SMO Enumprocesses method is there when I need it is really useful and I’m sure I’ll use it regularly. I’m OK with the fact that it is the slower method because Measure-Command has shown me how close it is to the other option and that it really isn’t a large enough margin to matter.

  Read the article

• How to close an oracle db connection from php on an apache server? I mean close instantly.

  - by Valentin Jacquemin

  Usually closing a connection is simply done by oci_clone($connection); or in a worse case when the php script ends the connection pass away. In my case however, I face a different behavior. If I access my application which uses PHP 5.2.8, Apache 2.2.11 and oci8 1.2.5, the connection is kept during several minutes. Actually it seems to: if I launch netstat -b I see that the process httpd.exe remains with the ESTABLISHED status on the database's URL during a while (a few minutes). Could someone enlighten me on that behavior? P.S. I do not use persistent connections.

  Read the article

• Issues printing through ssh tunnel and port forwarding

  - by simogasp

  I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

  Read the article

• Using GMail's SMTP and IMAP servers in Notification Mailer

  - by Saroja Kandepuneni

  Overview GMail offers free, reliable, popular SMTP and IMAP services, because of which many people are interested to use it. GMail can be used when there are no in-house SMTP/IMAP servers for testing or debugging purposes. This blog explains how to install GMail SSL certificate in Concurrent Tier, testing the connection using a standalone program, running Mailer diagnostics and configuring GMail IMAP and SMTP servers for Workflow Notification Mailer Inbound and Outbound connections. GMail servers configuration SMTP server Host Name  smtp.gmail.com SSL Port  465 TLS/SSL required  Yes User Name  Your full email address (including @gmail.com or @your_domain.com) Password  Your gmail passwor  IMAP server  Host Name imap.gmail.com  SSL Port 993 TLS/SSL Required Yes  User Name  Your full email address (including @gmail.com or @your_domain.com)  Password Your gmail password GMail SSL Certificate Installation The following is the procedure to install the GMail SSL certificate Copy the below GMail SSL certificate to a file eg: gmail.cer -----BEGIN CERTIFICATE-----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-----END CERTIFICATE----- Install the SSL certificate into the default JRE location or any other location using below command Installing into a dfeault JRE location in EBS instance         # keytool -import -trustcacerts -keystore $AF_JRE_TOP/lib/security/cacerts  -storepass changeit -alias gmail-lnx_chainnedcert -file gmail.cer Install into a custom location         # keytool -import -trustcacerts -keystore <customLocation>  -storepass changeit -alias gmail-lnx_chainnedcert -file gmail.cer       <customLocation> -- directory in instance where the certificate need to be installed After running the above command you can see the following response         Trust this certificate? [no]:  yes        Certificate was added to keystore Running Mailer Command Line Diagnostics Run Mailer command line diagnostics from conccurrent tier where Mailer is running, to check the IMAP connection using the below command $AFJVAPRG -classpath $AF_CLASSPATH -Dprotocol=imap -Ddbcfile=$FND_SECURE/$TWO_TASK.dbc -Dserver=imap.gmail.com -Dport=993 -Dssl=Y -Dtruststore=$AF_JRE_TOP/lib/security/cacerts -Daccount=<gmail username> -Dpassword=<password> -Dconnect_timeout=120 -Ddebug=Y -Dlogfile=GmailImapTest.log -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer Run Mailer command line diagnostics from concurrent tier where Mailer is running, to check the SMTP connection using the below command   $AFJVAPRG -classpath $AF_CLASSPATH -Dprotocol=smtp -Ddbcfile=$FND_SECURE/$TWO_TASK.dbc -Dserver=smtp.gmail.com -Dport=465 -Dssl=Y -Dtruststore=$AF_JRE_TOP/lib/security/cacerts -Daccount=<gmail username> -Dpassword=<password> -Dconnect_timeout=120 -Ddebug=Y -Dlogfile=GmailSmtpTest.log -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer Standalone program to verify the IMAP connection Run the below standalone program from the concurrent tier node where Mailer is running to verify the connection with GMail IMAP server. It connects to the Gmail IMAP server with the given GMail user name and password and lists all the folders that exist in that account. If the Gmail IMAP server is not working for the  Mailer check whether the PROCESSED and DISCARD folders exist for the GMail account, if not create manually by logging into GMail account.Sample program to test GMail IMAP connection  The standalone program can be run as below  $java GmailIMAPTest GmailUsername GMailUserPassword            Standalone program to verify the SMTP connection Run the below standalone program from the concurrent tier node where Mailer is running to verify the connection with GMail SMTP server. It connects to the GMail SMTP server by authenticating with the given user name and password  and sends a test email message to the give recipient user email address. Sample program to test GMail SMTP connection The standalone program can be run as below  $java GmailSMTPTest GmailUsername gMailPassword recipientEmailAddress    Warnings As gmail.com is an external domain, the Mailer concurrent tier should allow the connection with GMail server Please keep in mind when using it for corporate facilities, that the e-mail data would be stored outside the corporate network

  Read the article

• Weird SSIS Configuration Error

  - by Christopher House

  I ran into an interesting SSIS issue that I thought I'd share in hopes that it may save someone from bruising their head after repeatedly banging it on the desk like I did.  I was trying to setup what I believe is referred to as "indirect configuration" in SSIS.  This is where you store your configuration in some repository like a database or a file, then store the location of that repository in an environment variable and use that to configure the connection to your configuration repository.  In my specific situation, I was using a SQL database.  I had this all working, but for reasons I'll not bore you with, I had to move my SSIS development to a new VM last week.  When I got my new VM, I set about creating a new package.  I finished up development on the package and started setting up configuration.  I created an OLE DB connection that pointed to my configuration table then went through the configuration wizard to have the connection string for this connection set through my environment variable.  I then went through the wizard to set another property through a value stored in the configuration table.  When I got to the point where you select the connection, my connection wasn't in the list: As you can see in the screen capture above, the ConfigurationDb connection isn't in the list of available SQL connections in the configuration wizard.  Strange.  I canceled out of the wizard, went to the properties for ConfigurationDb, tested the connection and it was successful.  I went back to the wizard again and this time ConfigurationDb was there.  I completed the wizard then went to test my package.  Unfortunately the package wouldn't run, I got the following error: Unfortunately, googling for this error code didn't help much as none of the results appears related to package configuration.  I did notice that when I went back through the package configuration and tried to edit a previously saved config entry,  I was getting the following error: I checked the connection string I had stored in my environment variable and noticed that indeed, it did not have a provider name.  I didn't recall having included one on my previous VM, but I figured I'd include it just to see what happened.  That made no difference at all.  After a day and a half of trying to figure out what the problem was, I'm pleased to report that through extensive trial and error, I have resolved the error. As it turns out, the person who setup this new VM for me named the server SQLSERVER2008.  This meant my configuration connection string was: Initial Catalog=SSISConfigDb;Data Source=SQLSERVER2008;Integrated Security=SSPI; Just for the heck of it, I tried changing it to: Initial Catalog=SSISConfigDb;Data Source=(local);Integrated Security=SSPI; That did the trick!  As soon as I restarted BIDS, I was able to run the package with no errors at all.  Crazy.  So, the moral of the story is, don't name your server SQLSERVER2008 if you want SSIS configuration to work when using SQL as your config store.

  Read the article

• Why is my Linux box dropping network connection? [closed]

  - by Robo

  I have a Debian server in the form of a Raspberry Pi running Raspian. It has a USB Wi-Fi connection. Sometimes it would not respond when I SSH to it, and would require a reboot. I found something in syslog that may indicate what the problem is, can someone help with what this means? Dec 16 15:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 16:17:01 raspberrypi /USR/SBIN/CRON[2109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 16:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 17:17:01 raspberrypi /USR/SBIN/CRON[2127]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 17:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 18:17:01 raspberrypi /USR/SBIN/CRON[2142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 18:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 19:17:01 raspberrypi /USR/SBIN/CRON[2161]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 19:31:29 raspberrypi kernel: [16615.391509] ieee80211 phy0: wlan0: No probe response from AP 00:21:29:6c:5c:3d after 500ms, disconnecting. Dec 16 19:31:29 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:21:29:6c:5c:3d reason=4 Dec 16 19:31:29 raspberrypi kernel: [16615.416189] cfg80211: Calling CRDA to update world regulatory domain Dec 16 19:31:30 raspberrypi ifplugd(wlan0)[1444]: Link beat lost. Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Executing '/etc/ifplugd/ifplugd.action wlan0 down'. Dec 16 19:31:40 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-TERMINATING - signal 15 received Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Program executed successfully. Dec 16 19:31:42 raspberrypi ntpd[1928]: Deleting interface #2 wlan0, 192.168.1.10#123, interface stats: received=321, sent=327, dropped=0, active_time=16596 secs Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.6.116.123 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.99.128.34 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.118.148.40 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.89.49.65 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: peers refreshed

  Read the article

• How can I force all internet traffic over a PPTP VPN but still allow local lan access?

  - by user126715

  I have a server running Linux Mint 12 that I want to keep connected to a PPTP VPN all the time. The VPN server is pretty reliable, but it drops on occasion so I just want to make it so all internet activity is disabled if the VPN connection is broken. I'd also like to figure out a way to restart it automatically, but that's not as big of an issue since this happens pretty rarely. I also want to always be able to connect to the box from my lan, regardless of whether the VPN is up or not. Here's what my ifconfig looks like with the VPN connected properly: eth0 Link encap:Ethernet HWaddr 00:22:15:21:59:9a inet addr:192.168.0.171 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:15ff:fe21:599a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37389 errors:0 dropped:0 overruns:0 frame:0 TX packets:29028 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:37781384 (37.7 MB) TX bytes:19281394 (19.2 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1446 errors:0 dropped:0 overruns:0 frame:0 TX packets:1446 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:472178 (472.1 KB) TX bytes:472178 (472.1 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.10.11.10 P-t-P:10.10.11.9 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:23 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1368 (1.3 KB) TX bytes:1812 (1.8 KB) Here's an iptables script I found elsewhere that seemed to be for the problem I'm trying to solve, but it wound up blocking all access, but I'm not sure what I need to change: #!/bin/bash #Set variables IPT=/sbin/iptables VPN=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` LAN=192.168.0.0/24 #Flush rules $IPT -F $IPT -X #Default policies and define chains $IPT -P OUTPUT DROP $IPT -P INPUT DROP $IPT -P FORWARD DROP #Allow input from LAN and tun0 ONLY $IPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A INPUT -i lo -j ACCEPT $IPT -A INPUT -i tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -s $LAN -m conntrack --ctstate NEW -j ACCEPT $IPT -A INPUT -j DROP #Allow output from lo and tun0 ONLY $IPT -A OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT $IPT -A OUTPUT -o tun0 -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -d $VPN -m conntrack --ctstate NEW -j ACCEPT $IPT -A OUTPUT -j DROP exit 0 Thanks for your help.

  Read the article

• Why can't we reach some (but not all) external web service via VPN connection?

  - by Paul Haldane

  At work (UK university) we use a set of Windows servers running WS2008R2 and RRAS which offer VPN service to students in our accommodation. We do this to associate the network connections with individuals. Before they've connected to the VPN all they can talk to is the stuff thats needed to setup the VPN and a local web site with documentation on how to connect. Medium term we'll probably replace this but it's what we're using at the moment. VPN on the 2008 servers allocates client a private (10.x) address. Access to external sites is through NAT on the campus routers (same as any other directly connected client on a private address). Non-VPN connections aren't seeing this problem. Older servers run WS 2003 and ISA2004. That setup works but has become unreliable under load. Big difference there was that we were allocating non-RFC1918 addresses to the clients (so no NAT required). Behaviour we're seeing is that once connected to the VPN, clients can reach local web sites (that is sites on the campus network) but only some external sites. It seems (but this may be chance) that the sites we can reach are Google ones (including YouTube). We certainly have trouble reaching Microsoft's Office 365 service (which is a pain because that's where mail for most of our students is). One odd bit of behaviour is that clients can fetch (using wget on a Windows 7 client) http://www.oracle.com/ (which gets a 301 redirect) but hangs when asked to fetch http://www.oracle.com/index.html (which is what the first URL redirects to). Access works reliably if we configure clients to use our local web proxies (Squid). My gut tells me that this is likely to be something in the chain dropping replies either based on HTTP inspection or the IP address in the reply. However I'm puzzled about why we're seeing this with the VPN clients. Plan for tomorrow (when I'm back in the office) is to setup a web server on external connection so that we can monitor behaviour at both ends of the conversation (hoping that the problem manifests itself with our test server). Any suggestions for things we should be looking at?

  Read the article

• Spring JMS MQJE001: Completion Code '2', Reason '2042'.

  - by john

  My setup is Spring 3 JMS, MVC + Websphere MQ + Websphere 7 <!-- this is the Message Driven POJO (MDP) --> <bean id="messageListener" class="com.SomeListener" /> <!-- and this is the message listener container --> <bean id="jmsContainer" class="org.springframework.jms.listener.DefaultMessageListenerContainer"> <property name="connectionFactory" ref="xxxCF" /> <property name="destination" ref="someQueue" /> <property name="messageListener" ref="messageListener" /> </bean> When I start up the server, the listener seems to start correctly since it receives the messages that are on the queue as I put them. However, once I run any simple controller/action that doesn't even have anything to do with JMS it gives me the message below over and over... DefaultMessag W org.springframework.jms.listener.DefaultMessageListenerContainer handleListenerSetupFailure Setup of JMS message listener invoker failed for destination 'queue:///ABCDEF.EFF.OUT?persistence=-1' - trying to recover. Cause: MQJMS2008: failed to open MQ queue ''.; nested exception is com.ibm.mq.MQException: MQJE001: Completion Code '2', Reason '2042'. DefaultMessag I org.springframework.jms.listener.DefaultMessageListenerContainer refreshConnectionUntilSuccessful Successfully refreshed JMS Connection ConnectionEve W J2CA0206W: A connection error occurred. To help determine the problem, enable the Diagnose Connection Usage option on the Connection Factory or Data Source. ConnectionEve A J2CA0056I: The Connection Manager received a fatal connection error from the Resource Adapter for resource JMS$XXXQCF$JMSManagedConnection@2. The exception is: javax.jms.JMSException: MQJMS2008: failed to open MQ queue ''. ConnectionEve W J2CA0206W: A connection error occurred. To help determine the problem, enable the Diagnose Connection Usage option on the Connection Factory or Data Source. ConnectionEve A J2CA0056I: The Connection Manager received a fatal connection error from the Resource Adapter for resource jms/XXXQCF. The exception is: javax.jms.JMSException: MQJMS2008: failed to open MQ queue ''. The original listener seems to be still running correctly...but I think the controller is somehow triggering off another connection? Does anyone know what I should check for or what might cause this issue? thanks

  Read the article

• Using RabbitMQ (Java client), is there a way to determine if network connection is closed during con

  - by MItch Branting

  I'm using RabbitMQ on RHEL 5.3 using the Java client. I have 2 nodes (machines). Node1 is consuming messages from a queue on Node2 using the Java helper class QueueingConsumer. QueueingConsumer consumer = new QueueingConsumer(channel); channel.basicConsume("MyQueueOnNode2", noAck, consumer); while (true) { QueueingConsumer.Delivery delivery = consumer.nextDelivery(); ... Process message - delivery.getBody() } If the interface is brought down on Node1 or Node2 (e.g. ifconfig eth1 down), the client (above) never knows the network isn't there anymore. Does RabbitMQ provide some type of configuration on the Java client that can be used to determine if the connection has gone away. Shutting down the RabbitMQ server on Node2 will trigger a ShutdownSignalException, which can be caught and the app can go into a reconnect loop. But bringing down the interface doesn't cause any type of exception to happen, so the code will be waiting forever on consumer.nextDelivery(). I've also tried using the timeout version of this call. e.g. QueueingConsumer consumer = new QueueingConsumer(channel); channel.basicConsume("MyQueueOnNode2", noAck, consumer); int timeout_ms = 30000; while (true) { QueueingConsumer.Delivery delivery = consumer.nextDelivery(timeout_ms); if (delivery == null) { if (channel.isOpen() == false) // Seems to always return true { throw new ShutdownSignalException(); } } else { ... Process message - delivery.getBody() } } but appears that this always returns true (even though the interface is down). I assume registering for the ShutdownListener on the connection will yield the same results, but haven't tried that yet. Is there a way to configure some sort of heartbeat, or do you just have to write custom lease logic (e.g. "I'm here now") in order to get this to work?

  Read the article

• Visual Studio 2010 Hosting :: Connect to MySQL Database from Visual Studio VS2010

  - by mbridge

  So, in order to connect to a MySql database from VS2010 you need to 1. download the latest version of the MySql Connector/NET from http://www.mysql.com/downloads/connector/net/ 2. install the connector (if you have an older version you need to remove it from Control Panel -> Add / Remove Programs) 3. open Visual Studio 2010 4. open Server Explorer Window (View -> Server Explorer) 5. use Connect to Database button 6. in the Choose Data Source windows select MySql Database and press Continue 7. in the Add Connection window - set server name: 127.0.0.1 or localhost for MySql server running on local machine or an IP address for a remote server - username and password - if the the above data is correct and the connection can be made, you have the possibility to select the database If you want to connect to a MySql database from a C# application (Windows or Web) you can use the next sequence: //define the connection reference and initialize it MySql.Data.MySqlClient.MySqlConnection msqlConnection = null; msqlConnection = new MySql.Data.MySqlClient.MySqlConnection(“server=localhost;user id=UserName;Password=UserPassword;database=DatabaseName;persist security info=False”);     //define the command reference MySql.Data.MySqlClient.MySqlCommand msqlCommand = new MySql.Data.MySqlClient.MySqlCommand();     //define the connection used by the command object msqlCommand.Connection = this.msqlConnection;     //define the command text msqlCommand.CommandText = "SELECT * FROM TestTable;"; try {     //open the connection     this.msqlConnection.Open();     //use a DataReader to process each record     MySql.Data.MySqlClient.MySqlDataReader msqlReader = msqlCommand.ExecuteReader();     while (msqlReader.Read())     {         //do something with each record     } } catch (Exception er) {     //do something with the exception } finally {     //always close the connection     this.msqlConnection.Close(); }.

  Read the article

• How to call JSON asynchronous in xcode/ iphone develope

  - by Frames84

  I'm using the JSON framework hosting on Google. What and it's a news app that loads JSON feeds, when app goes off to load the feed I want to display the UIActivityIndicatorView but I've found my JSON Access code is not being called asynchronous which is locking the user interface. I have highlighted the function in the code and can't figuree out without breaking how to change the code. #import "JSON DataAccess Wrapper.h" #import "JSON.h" @implementation JSON_DataAccess_Wrapper @synthesize dataItemList; ////////////////////////////////////////////// /* START FEED CONNECTION/ HANDLE METHODS */ ////////////////////////////////////////////// - (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response { [responseData setLength:0]; } - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { [responseData appendData:data]; } - (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error { //label.text = [NSString stringWithFormat:@"Connection failed: %@", [error description]]; } - (void)connectionDidFinishLoading:(NSURLConnection *)connection { [connection release]; } - (NSString *)stringWithUrl:(NSURL *)url { NSURLRequest *urlRequest = [NSURLRequest requestWithURL:url cachePolicy:NSURLRequestReturnCacheDataElseLoad timeoutInterval:30]; NSData *urlData; NSURLResponse *response = nil; NSError *error = nil; /* HOW TO MAKE THE CALL BELOW ASYNCHRONOUS */ urlData = [NSURLConnection sendSynchronousRequest:urlRequest returningResponse:&response error:&error]; return [[NSString alloc] initWithData:urlData encoding:NSUTF8StringEncoding]; } -(id) objectWithUrl:(NSURL *)url { SBJSON *jsonParser = [SBJSON new]; NSString *jsonString = [self stringWithUrl:url]; return [jsonParser objectWithString:jsonString error:NULL]; } - (NSMutableArray *) downloadJSONFeed { id response = [self objectWithUrl:[NSURL URLWithString:@"http://www.mysite.co.uk/index2.php?option=JSON"]]; NSMutableArray *feed = (NSMutableArray *) response; return feed; }

  Read the article

• Jquery Internet Explorer 8 compatibility issue, does not load data unless history is deleted...

  - by Scarface

  Hey guys, I have a weird problem. I have an update system that refreshes data on a time interval. It works well in all browsers except internet explorer 8. The problem is that once it loads the data, it does not matter if the data updates further, it will not update the data visually until the internet history is cleared. I am not using any cookies server-side...Anyone ever encounter something like this? Here is my javascript, thanks for any assistance in advance function prepare(response) { var d = new Date(); count++; d.setTime(response.time*1000); var mytime = d.getHours()+':'+d.getMinutes()+':'+d.getSeconds(); var string = '<li class="shoutbox-list" id="list-'+count+'">' + '<span class="shoutbox-list-nick"><a href="statistics.php?user='+response.user+'">'+response.user+'</a></span>' + ' <span class="date">'+mytime+'</span><br>' + '<span class="msg">'+response.message+'</span>' +'</li>'; return string; } function refresh() { $.getJSON(files+"shoutbox.php?action=view&time="+lastTime+"&topic_id="+topic_id, function(json) { if(json.length) { for(i=0; i < json.length; i++) { $('#daddy-shoutbox-list').prepend(prepare(json[i])); $('#list-' + count).fadeIn(1500); } var j = i-1; lastTime = json[j].time; } //alert(lastTime); }); timeoutID = setTimeout(refresh, 3000); } $(document).ready(function() { var options = { dataType: 'json', beforeSubmit: validate, success: function(response, status){ if (response.error=='success'){ success(response, status); } else { $.prompt(response.error); } } }; $('#daddy-shoutbox-form').ajaxForm(options); timeoutID = setTimeout(refresh, 100); });

  Read the article

• Why ClassCastException on JMS ConnectionFactory lookup in JNDI?

  - by Derek Mahar

  What might be the cause of the following ClassCastException in a standalone JMS client application when it attempts to retrieve a connection factory from the JNDI provider? Exception in thread "main" java.lang.ClassCastException: javax.naming.Reference cannot be cast to javax.jms.ConnectionFactory Here is an abbreviated version of the JMS client that includes only its start() and stop() methods. The exception occurs on the first line in method start() which attempts to retrieve the connection factory from the JNDI provider, a remote LDAP server. The JMS connection factory and destination objects are on a remote JMS server. class JmsClient { private ConnectionFactory connectionFactory; private Connection connection; private Session session; private MessageConsumer consumer; private Topic topic; public void stop() throws JMSException { consumer.close(); session.close(); connection.close(); } public void start(Context context, String connectionFactoryName, String topicName) throws NamingException, JMSException { // ClassCastException occurs when retrieving connection factory. connectionFactory = (ConnectionFactory) context.lookup(connectionFactoryName); connection = connectionFactory.createConnection("username","password"); session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE); topic = (Topic) context.lookup(topicName); consumer = session.createConsumer(topic); connection.start(); } private static Context getInitialContext() throws NamingException, IOException { String filename = "context.properties"; Properties props = new Properties(); props.load(new FileInputStream(filename)); return new InitialContext(props); } }

  Read the article

• How can I load txt file from internet into my jsf app?

  - by Elena

  Hi all! It's me again) I have another problem. I want to load file (for example - txt) from web. I tried to use the next code in my managed bean: public void run() { try { URL url = new URL(this.filename); URLConnection connection = url.openConnection(); bufferedReader = new BufferedReader(new InputStreamReader(connection.getInputStream())); if (bufferedReader == null) { return; } System.out.println("wwwwwwwwwwwwwwwwwwwww"); String str = bufferedReader.readLine(); System.out.println("qqqqqqqqqqqqqqqqqqqqqqq = " + str); while (bufferedReader.readLine() != null) { System.out.println("---- " + bufferedReader.readLine()); } } catch(MalformedURLException mue) { System.out.println("MalformedURLException in run() method"); mue.printStackTrace(); } catch(IOException ioe) { System.out.println("IOException in run() method"); ioe.printStackTrace(); } finally { try { bufferedReader.close(); } catch(IOException ioe) { System.out.println("UOException wile closing BufferedReader"); ioe.printStackTrace(); } } } public String doFileUpdate() { String str = FacesContext.getCurrentInstance().getExternalContext().getRequestServletPath(); System.out.println("111111111111111111111 str = " + str); str = "http://narod.ru/disk/20957166000/test.txt.html";//"http://localhost:8080/sfront/files/test.html"; System.out.println("222222222222222222222 str = " + str); FileUpdater fileUpdater = new FileUpdater(str); fileUpdater.run(); return null; } But the BufferedReader returns the html code of the current page, where i am trying to call managed bean's method. It's very strange thing - I have googled and none have had this problem. Maybe I do something wrong, maybe there us a simplest way to load file into web (jsf) app not using net API. Any ideas? Thanks very much for help! With best wishes)

  Read the article

• Getting a connection from a Sybase datasource in WAS 6.1 fails with message "User name property miss

  - by Abel Morelos

  I have a standalone application that needs to connect to a Sybase database via a datasource, I'm trying to connect using getConnection() and get the connection from this Sybase datasource which is hosted in WAS 6.1, sadly I'm getting an error JZ004 - Sybase(R) jConnect for JDBC(TM) Programmer's Reference: SQL Exception and Warning Messages JZ004 error message is: User name property missing in DriverManager.getConnection(..., Properties) Action: Provide the required user property. As you can see, this is not a connectivity (so we can discard JNDI or lookup problems), but rather a configuration problem. For my Sybase datasource in WAS 6.1 I have set up the proper authentication alias (Component-managed Authentication Alias), and I know the credentials are alright, "Test Connection" is successful for this datasource. Somebody had a similar problem and was because of the authentication alias- http://forum.springsource.org/showthread.php?t=39915 Next, I tried calling getConnection() but now I provided the credentials like getConnection(user, password)... and this time it worked!!! So I suspect that somehow WAS 6.1 is not picking or taking the authentication info I set in the datasource as mentioned before. If you think that maybe getConnection(user, password) should be OK for my case, well, that's not the case since I have a requirement to keep the credentials in the server, the standalone application only needs to know the JNDI information to lookup the datasource. Please let me know if have faced a similar problem, or what would you suggest me to do. Thanks.

  Read the article

• Java HTTP Request Occasionally Hangs

  - by behrk2

  Hello Everyone, For the majority of the time, my HTTP Requests work with no problem. However, occasionally they will hang. The code that I am using is set up so that if the request succeeds (with a response code of 200 or 201), then call screen.requestSucceeded(). If the request fails, then call screen.requestFailed(). When the request hangs, however, it does so before one of the above methods are called. Is there something wrong with my code? Should I be using some sort of best practice to prevent any hanging? The following is my code. I would appreciate any help. Thanks! HttpConnection connection = (HttpConnection) Connector.open(url + connectionParameters); connection.setRequestMethod(method); connection.setRequestProperty("WWW-Authenticate", "OAuth realm=api.netflix.com"); if (method.equals("POST")) { connection.setRequestProperty("Content-type", "application/x-www-form-urlencoded"); } int responseCode = connection.getResponseCode(); System.out.println("RESPONSE CODE: " + responseCode); if (connection instanceof HttpsConnection) { HttpsConnection secureConnection = (HttpsConnection) connection; String issuer = secureConnection.getSecurityInfo() .getServerCertificate().getIssuer(); UiApplication.getUiApplication().invokeLater( new DialogRunner( "Secure Connection! Certificate issued by: " + issuer)); } if (responseCode != 200 && responseCode != 201) { screen.requestFailed("Unexpected response code: " + responseCode); connection.close(); return; } String contentType = connection.getHeaderField("Content-type"); ByteArrayOutputStream baos = new ByteArrayOutputStream(); InputStream responseData = connection.openInputStream(); byte[] buffer = new byte[20000]; int bytesRead = 0; while ((bytesRead = responseData.read(buffer)) > 0) { baos.write(buffer, 0, bytesRead); } baos.close(); connection.close(); screen.requestSucceeded(baos.toByteArray(), contentType); } catch (IOException ex) { screen.requestFailed(ex.toString()); }

  Read the article

• UIImage - should be loaded with [UIImage imageNamed:@""] or not ?

  - by sagar

  Hello ! every one. I am having number of images with in my application. ( images more than 50 - approximately & it can extend according to client's need ) Each image are very large round about - 1024 x 768 & 150 dpi Now, I have to add all this images in a scroll view & display it. Ok, My question is as follows. According to me there are two options of loading large images imageNamed:@"" load asynchronously when viewDidLoad Called. Which is more preferable ? imgModel.image=[UIImage imageNamed:[dMain valueForKey:@"imgVal"]]; or like this. NSURL *ur=[[NSURL alloc] initFileURLWithPath:[[NSBundle mainBundle] pathForResource:lblModelName.text ofType:@"png"] isDirectory:NO]; NSURLRequest *req=[NSURLRequest requestWithURL:ur cachePolicy:NSURLCacheStorageNotAllowed timeoutInterval:40]; [ur release]; NSURLConnection *con=[[NSURLConnection alloc] initWithRequest:req delegate:self]; if(con){ myWebData=[[NSMutableData data] retain]; } else { } -(void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response { [myWebData setLength: 0]; } -(void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { [myWebData appendData:data]; } -(void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error { [connection release]; } -(void)connectionDidFinishLoading:(NSURLConnection *)connection { NSLog(@"ImageView Ref From - %@",imgV); // my image view & set image imgV.image=[UIImage imageWithData:myWebData]; [connection release]; connection=nil; }

  Read the article

• The remote server returned an error: 227 Entering Passive Mode

  - by hmloo

  Today while uploading file to FTP sever, the codes throw an error - "The remote server returned an error: 227 Entering Passive Mode", after research, I got some knowledge in FTP working principle. FTP may run in active or passive mode, which determines how the data connection is established. Active mode: command connection: client >1024  -> server 21 data connection:    client >1024  <-  server 20 passive mode: command connection: client > 1024 -> server 21 data connection:    client > 1024 <- server > 1024 In active mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the client will use PORT command to tell the server:"hi, I opened port XXXX, please connect to me." and then server will use port 20 to initiate the data connection to that client port number. In passive mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the sever will tell the client:"hi, I opened port XXXX , please connect to me." and then client will initiate the data connection to that sever port number. In a nutshell, active mode is used to have the server connect to the client, and passive mode is used to have the client connect to the server. So if your FTP server is configured to work in active mode only or the firewalls between your client and the server are blocking the data port range, then you will get error message, to fix this issue, just set System.Net.FtpWebRequest property UsePassive = false. Hope this helps! Thanks for reading!

  Read the article

• Advantage database throws an exception when attempting to delete a record with a like statement used

  - by ChrisR

  The code below shows that a record is deleted when the sql statement is: select * from test where qty between 50 and 59 but the sql statement: select * from test where partno like 'PART/005%' throws the exception: Advantage.Data.Provider.AdsException: Error 5072: Action requires read-write access to the table How can you reliably delete a record with a where clause applied? Note: I'm using Advantage Database v9.10.1.9, VS2008, .Net Framework 3.5 and WinXP 32 bit using System.IO; using Advantage.Data.Provider; using AdvantageClientEngine; using NUnit.Framework; namespace NetworkEidetics.Core.Tests.Dbf { [TestFixture] public class AdvantageDatabaseTests { private const string DefaultConnectionString = @"data source={0};ServerType=local;TableType=ADS_CDX;LockMode=COMPATIBLE;TrimTrailingSpaces=TRUE;ShowDeleted=FALSE"; private const string TestFilesDirectory = "./TestFiles"; [SetUp] public void Setup() { const string createSql = @"CREATE TABLE [{0}] (ITEM_NO char(4), PARTNO char(20), QTY numeric(6,0), QUOTE numeric(12,4)) "; const string insertSql = @"INSERT INTO [{0}] (ITEM_NO, PARTNO, QTY, QUOTE) VALUES('{1}', '{2}', {3}, {4})"; const string filename = "test.dbf"; var connectionString = string.Format(DefaultConnectionString, TestFilesDirectory); using (var connection = new AdsConnection(connectionString)) { connection.Open(); using (var transaction = connection.BeginTransaction()) { using (var command = connection.CreateCommand()) { command.CommandText = string.Format(createSql, filename); command.Transaction = transaction; command.ExecuteNonQuery(); } transaction.Commit(); } using (var transaction = connection.BeginTransaction()) { for (var i = 0; i < 1000; ++i) { using (var command = connection.CreateCommand()) { var itemNo = string.Format("{0}", i); var partNumber = string.Format("PART/{0:d4}", i); var quantity = i; var quote = i * 10; command.CommandText = string.Format(insertSql, filename, itemNo, partNumber, quantity, quote); command.Transaction = transaction; command.ExecuteNonQuery(); } } transaction.Commit(); } connection.Close(); } } [TearDown] public void TearDown() { File.Delete("./TestFiles/test.dbf"); } [Test] public void CanDeleteRecord() { const string sqlStatement = @"select * from test"; Assert.AreEqual(1000, GetRecordCount(sqlStatement)); DeleteRecord(sqlStatement, 3); Assert.AreEqual(999, GetRecordCount(sqlStatement)); } [Test] public void CanDeleteRecordBetween() { const string sqlStatement = @"select * from test where qty between 50 and 59"; Assert.AreEqual(10, GetRecordCount(sqlStatement)); DeleteRecord(sqlStatement, 3); Assert.AreEqual(9, GetRecordCount(sqlStatement)); } [Test] public void CanDeleteRecordWithLike() { const string sqlStatement = @"select * from test where partno like 'PART/005%'"; Assert.AreEqual(10, GetRecordCount(sqlStatement)); DeleteRecord(sqlStatement, 3); Assert.AreEqual(9, GetRecordCount(sqlStatement)); } public int GetRecordCount(string sqlStatement) { var connectionString = string.Format(DefaultConnectionString, TestFilesDirectory); using (var connection = new AdsConnection(connectionString)) { connection.Open(); using (var command = connection.CreateCommand()) { command.CommandText = sqlStatement; var reader = command.ExecuteExtendedReader(); return reader.GetRecordCount(AdsExtendedReader.FilterOption.RespectFilters); } } } public void DeleteRecord(string sqlStatement, int rowIndex) { var connectionString = string.Format(DefaultConnectionString, TestFilesDirectory); using (var connection = new AdsConnection(connectionString)) { connection.Open(); using (var command = connection.CreateCommand()) { command.CommandText = sqlStatement; var reader = command.ExecuteExtendedReader(); reader.GotoBOF(); reader.Read(); if (rowIndex != 0) { ACE.AdsSkip(reader.AdsActiveHandle, rowIndex); } reader.DeleteRecord(); } connection.Close(); } } } }

  Read the article

• Can I dispose a DataTable and still use its data later?

  - by Eduardo León

  Noob ADO.NET question: Can I do the following? Retrieve a DataTable somehow. Dispose it. Still use its data. (But not send it back to the database, or request the database to update it.) I have the following function, which is indirectly called by every WebMethod in a Web Service of mine: public static DataTable GetDataTable(string cmdText, SqlParameter[] parameters) { // Read the connection string from the web.config file. Configuration configuration = WebConfigurationManager.OpenWebConfiguration("/WSProveedores"); ConnectionStringSettings connectionString = configuration.ConnectionStrings.ConnectionStrings["..."]; SqlConnection connection = null; SqlCommand command = null; SqlParameterCollection parameterCollection = null; SqlDataAdapter dataAdapter = null; DataTable dataTable = null; try { // Open a connection to the database. connection = new SqlConnection(connectionString.ConnectionString); connection.Open(); // Specify the stored procedure call and its parameters. command = new SqlCommand(cmdText, connection); command.CommandType = CommandType.StoredProcedure; parameterCollection = command.Parameters; foreach (SqlParameter parameter in parameters) parameterCollection.Add(parameter); // Execute the stored procedure and retrieve the results in a table. dataAdapter = new SqlDataAdapter(command); dataTable = new DataTable(); dataAdapter.Fill(dataTable); } finally { if (connection != null) { if (command != null) { if (dataAdapter != null) { // Here the DataTable gets disposed. if (dataTable != null) dataTable.Dispose(); dataAdapter.Dispose(); } parameterCollection.Clear(); command.Dispose(); } if (connection.State != ConnectionState.Closed) connection.Close(); connection.Dispose(); } } // However, I still return the DataTable // as if nothing had happened. return dataTable; }

  Read the article

• Better ways to print out column names when using cx_Oracle

  - by philipjkim

  Found an example using cx_Oracle, this example shows all the information of Cursor.description. import cx_Oracle from pprint import pprint connection = cx_Oracle.Connection("%s/%s@%s" % (dbuser, dbpasswd, oracle_sid)) cursor = cx_Oracle.Cursor(connection) sql = "SELECT * FROM your_table" cursor.execute(sql) data = cursor.fetchall() print "(name, type_code, display_size, internal_size, precision, scale, null_ok)" pprint(cursor.description) pprint(data) cursor.close() connection.close() What I wanted to see was the list of Cursor.description[0](name), so I changed the code: import cx_Oracle import pprint connection = cx_Oracle.Connection("%s/%s@%s" % (dbuser, dbpasswd, oracle_sid)) cursor = cx_Oracle.Cursor(connection) sql = "SELECT * FROM your_table" cursor.execute(sql) data = cursor.fetchall() col_names = [] for i in range(0, len(cursor.description)): col_names.append(cursor.description[i][0]) pp = pprint.PrettyPrinter(width=1024) pp.pprint(col_names) pp.pprint(data) cursor.close() connection.close() I think there will be better ways to print out the names of columns. Please get me alternatives to the Python beginner. :-)

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >