Search Results

Search found 10191 results on 408 pages for 'nested resources'.

Page 266/408 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

• Wireless connection disconnects and reconnects with a Netgear WNA1000

  - by William Berkenkamp

  Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

  Read the article

• How to package static content outside of web application?

  - by chinto

  Our web application has static content packaged as part of WAR. We have been planning to move it out of the project and host it directly on Apache to achieve the following objectives. It's getting too big and bloating the EAR size resulting in slower deployment across nodes. Faster deployment times. Take the load of Application Server Host the static content on a sub domain allowing some browsers (IE) to load resources simultaneously Give us an option to use further caching such as Apache mod_cache apart from the cache headers we send out to browsers. We use yuicompressor-maven-plugin to aggregate and minimize JS file. My question is how do package and manage this static content out side of the web application? My current options are. New maven war project. Still use the same plugin for aggregation and compression. Just a plain directory in SVN and use YUI/Google compressor directly. Or is there a better technology out there to manage static content as a project?

  Read the article

• How do I debug xorg/fglrx related system freezes on Ubuntu 12.10?

  - by racerror

  My brand new system is randomly freezing and I don't know how to debug the issue. System: AMD A10-5800k Asus F2A85-M motherboard Integrated Radeon HD 7660D 8gb Samsung ddr3 1600 Ubuntu 12.10 Gnome shell / Unity (issue exists in both) xorg.conf (relevant parts): Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:0:1:0" Option "TexturedVideoSync" "on" Option "UseFastTLS" "2" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "Monitor0" DefaultDepth 24 Option "UseEDID" "False" Option "ExactModeTimingsDVI" "True" Option "NoBandWidthTest" "true" Option "ModeValidation" "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes" Option "UseEDIDDPI" "False" Option "UseEDIDFreqs" "0" Option "NoLogo" "True" Option "Coolbits" "1" Option "metamodes" "DFP-0: 2560x1440_60 +0+0" SubSection "Display" Depth 24 Modes "2560x1440" EndSubSection I ran memtest on my ram and it checks out fine. I have tried using the latest fglrx and fglrx-beta. I have loaded 3.6.x kernel. I do not see anything relevant in dmesg, kern.log, syslog, .xsession-errors or Xorg.log. I cannot ssh into the machine when frozen from another machine. I know that system resources not being stressed when the crashes happen. It seems that video and any gaming (very simple graphics games) contribute to the freezes most frequently. However, I have experienced the crash before when just using Chrome. I suspect the crashes are xorg/fglrx related, but I have no evidence to back that up. Where should I look? What should I grep for? What should I try next?

  Read the article

• Is my gedit-latex-plugin working properly?

  - by arroy_0209

  I have installed gedit-latex-plugin(0.2 rc3) to be used with gedit(2.30.3) in ubuntu 10.04. If I use the command gedit file.tex& in terminal the file is opened and it seems everything works fine but in the terminal, lots of comments appear, some of which are: 2012-03-31 22:14:27,263 DEBUG resources - Initializing resource locating 2012-03-31 22:14:27,361 DEBUG Preferences - not found 2012-03-31 22:14:27,373 DEBUG JobManager - Created JobManager instance 147209196 2012-03-31 22:14:27,379 DEBUG GeditLaTeXPlugin - activate 2012-03-31 22:14:27,379 DEBUG WindowContext - init 2012-03-31 22:14:27,444 DEBUG GeditWindowDecorator - _init_tab_decorators: initialized 0 decorators 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - active_tab_changed 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - ---------- ADJUST: None 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - No window-scope views for this extension 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:27,514 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 2012-03-31 22:14:27,539 DEBUG GeditWindowDecorator - tab_added 2012-03-31 22:14:27,952 DEBUG GeditTabDecorator - loaded 2012-03-31 22:14:27,964 DEBUG GeditTabDecorator - _adjust_editor: URI has changed 2012-03-31 22:14:27,965 DEBUG LaTeXCompletionHandler - init 2012-03-31 22:14:27,966 DEBUG LanguageModelFactory - Pickled object found: /home/abcd/.gnome2/gedit/plugins/GeditLaTeXPlugin/latex.pkl 2012-03-31 22:14:28,075 DEBUG CompletionDistributor - init 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view LaTeXOutlineView 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view IssueView 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - init(file:///home/abcd/dir1/file1.tex) 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - Parsing document... 2012-03-31 22:14:28,080 DEBUG IssueView - init 2012-03-31 22:14:28,082 DEBUG IssueView - init finished 2012-03-31 22:14:28,092 INFO LaTeXEditor - LaTeXParser.parse: 0.010000 2012-03-31 22:14:28,092 DEBUG LaTeXEditor - Parsed 1599 bytes of content 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - set_outline 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - init 2012-03-31 22:14:28,097 DEBUG LaTeXValidator - validate 2012-03-31 22:14:28,098 DEBUG LanguageModel - set_newcommands: 2012-03-31 22:14:28,102 DEBUG LaTeXEditor - Parsing finished 2012-03-31 22:14:28,105 DEBUG GeditWindowDecorator - ---------- ADJUST: .tex 2012-03-31 22:14:28,119 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:28,120 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 I am not sure if the gedit-latex-plugin is working properly or is it facing some problem. Why are there so many debug messages? Can anybody please suggest what I should do?

  Read the article

• Thoughts (on Windows Phone 7) from the MVP Summit

  - by Chris Williams

  Last week I packed off to Redmond, WA for my annual pilgrimage to Microsoft's MVP Summit. I'll spare you all the silly taunting about knowing stuff I can't talk about, etc... and just get to the point. I'm a XNA/DirectX MVP, an ASP Insider and a Languages (VB) Insider... so I actually had access to a pretty broad spectrum of information over the last week. Most of my time was focused on Windows Phone 7 related sessions, and while I can't dig deep into specifics, I can say that Microsoft is definitely not out of the fight for Mobile. The things I saw tell me that Microsoft is listening and paying attention to feedback, looking at what works & what doesn't and they are working their collective asses off to close the gap between Google and Apple. Anyone who has been in this industry for a while can tell you Microsoft does their best work when they are the underdog. They are currently behind, and have a lot of work ahead of them, but this is when they bring all their resources together to solve a problem. After the week I spent in Redmond, and the feedback I heard from other MVPs, and the technological previews I saw... I feel confident in betting heavily on Microsoft to pull this off.

  Read the article

• Complex string matching with fuzzywuzzy

  - by That1Guy

  I'm attempting to write a process that matches obscure strings to a single 'master string' for further processing. I have a lot of data that looks something like this: Basketball Basket Ball Football BasketBallR BBall BBall - r FootB ...and so on. These need to be mapped to a master record like so: Basketball = Basket Ball, BBall Basketball - R = BasketBallR, BBall - r I also have instances of data resembling this format: Football -r FootBall - r-g/H,Q,HH These situations need to be separated into different categories before being mapped. For example FootBall - r-g/H,Q,HH should be: Football - r Football - g Football - H Football - Q Football - HH At this point, it still needs to be mapped to a master record... I've tried several different combinations of fuzzywuzzy matching methods, Levenshtein Distance measurements, regex, etc. and can't seem to find a reliable method to logically associate different naming styles of a single item with a master name. I'm throwing my hands up in desperation. Are there any existing python resources than can help sort out my problem? Are there other options? Can anybody point out an obvious option that I might have overlooked? Basically, any suggestion, solution, resource or alternative method is greatly appreciated.

  Read the article

• Advice on designing web application with a 40+ year lifetime

  - by user2708395

  Scenario Currently, I am apart of a health care project whose main requirement is to capture data with unknown attributes using user generated forms by health care providers. The second requirement is that data integrity is key and that the application will be used for 40+ years. We are currently migrating the client's data from the past 40 years from various sources (Paper, Excel, Access, etc...) to the database. Future requirements are: Workflow management of forms Schedule management of forms Security/Role based management Reporting engine Mobile/Tablet support Situation Only 6 months in, the current (contracted) architect/senior programmer has taken the "fast" approach and has designed a poor system. The database is not normalized, the code is coupled, the tiers have no dedicated purpose and data is starting to go missing since he has designed some beans to perform "deletes" on the database. The code base is extremely bloated and there are jobs just to synchronize data since the database is not normalized. His approach has been to rely on backup jobs to restore missing data and doesn't seem to believe in re-factoring. Having presented my findings to the PM, the architect will be removed when his contract ends. I have been given the task to re-architect this application. My team consists of me and one junior programmer. We have no other resources. We have been granted a 6-month requirement freeze in which we can focus on re-building this system. I suggested using a CMS system like Drupal, but for policy reasons at the client's organization, the system must be built from scratch. This is the first time that I will be designing a system with a 40+ lifespan. I have only worked on projects with 3-5 year lifespans, so this situation is very new, yet exciting. Questions What design considerations will make the system more "future proof"? What experiences have you had in designing such systems - both failures and successes? What questions should be asked to the client/PM to make the system more "future proof"?

  Read the article

• Graphical Interface and Object Selection/Manipulation

  - by ToriArendt

  I have a project I want to try to implement, but I'm kind of stuck on how to get started. I know there are probably a lot of resources that I can look at, but I'm really just stuck on what to even search for and where to begin. Basically, I have a program written in Java that separates 3D coordinates from a 3D reconstructed model into different objects. I then want to be able to perform a logistic regression on these objects to determine if they are type A or type B. But first, I need to classify a training set of objects as type A or B by hand. I don't know ANYTHING about graphing or user interfaces in Java, so I have been plotting the coordinates of a given object in MATLAB so that I can visualize the object and assign it a type. Now, as I am trying to make this program more "user friendly" I want to create an interface in Java where I can simply graph all the coordinates of the objects from the entire 3D model (on the same graph). I then want to be able to click on the each object and assign it to be either of type A or type B. I hope this description makes sense and someone can point me in the direction of something that will help me. I'm sorry if some of this terminology is off; I'm a bit new to software development. P.S. If anyone also has some tips on implementing logistic regression in Java, I'm sure I'll need them down the road :).

  Read the article

• Ubuntu 14.04 install fails with Via S3 UniChrome Pro graphics

  - by WizardNo.7

  I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(it's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed (which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers. There is some leftover text from the kernel boot still visible, but there is no graphical desktop. After this I have to hard reboot or shut-down. $ lshw -c video *-display UNCLAIMED description: VGA compatible controller product: CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] Vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 32 bits clock: 66MHz capabilities: pm agp agp-2.0 vga_controller bus_master cap_list configuration: latency=64 mingnt=2 resources: memory:f0000000-f3ffffff memory:d1000000-d1ffffff

  Read the article

• CodePlex Daily Summary for Monday, November 11, 2013

  CodePlex Daily Summary for Monday, November 11, 2013Popular ReleasesULS Log Viewer Feature: ULS Log Viewer Feature: What's getting installed? - The solution include Custom Action (New action in Site Menu). Features: - Only Site Administrators can see Custom Action in site menu. - Multi-Language SUPPORT! (English, Hebrew). - Works against Secure Store Service to use administrator rights for getting access to ULS Logs Path on farm servers (Use the guide for creating new SSA). - Load only the last log file from ULS log path. - Gets automatically the ULS log path from Central Administration. - Choose from whi...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.3.3: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Magick.NET: Magick.NET 6.8.7.501: Magick.NET linked with ImageMagick 6.8.7.5. Breaking changes: - Refactored MagickImageStatistics to prepare for upcoming changes in ImageMagick 7. - Renamed MagickImage.SetOption to SetDefine.Media Companion: Media Companion MC3.587b: Fixed* TV - Locked shows display correctly after refresh * TV - missing episodes display in correct colour for missed or to be aired * TV - Rescrape of Multi-episodes working. * TV - Cache fix where was writing episodes multiple times * TV - Fixed Cache writing missing episodes when Display missing eps was disabled. Revision HistoryGenerate report of user mailbox size for Exchange 2010: Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Generate-report-of-user-e4e9afcaCheck SQL Server a specified database index fragmentation percentage (SQL): Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Check-SQL-Server-a-a5758043Save attachments from multiple selected items in Outlook (VBA): Script Download: Script Download: http://gallery.technet.microsoft.com/scriptcenter/Save-attachments-from-5b6bf54bRemove Windows Store apps in Windows 8: Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Remove-Windows-Store-Apps-a00ef4a4PCSX-Reloaded: 1.9.94: General changes:Support for compressed audio in cue files. ECM support. OS X changes:32-bit support has been dropped Partial French and Hungarian translationsDynamics AX 2012 R2 Kitting: AX 2012 R2 CU7 release of Kitting: Here is the AX 2012 R2 CU7 release of kitting. Released both as a XPO and a model.VidCoder: 1.5.12 Beta: Added an option to preserve Created and Last Modified times when converting files. In Options -> Advanced. Added an option to mark an automatically selected subtitle track as "Default". Updated HandBrake core to SVN 5878. Fixed auto passthrough not applying just after switching to it. Fixed bug where preset/profile/tune could disappear when reverting a preset.Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2013.9.25): XrmToolbox improvement Correct changing connection from the status dropdown Tools improvement Updated tool Audit Center (v1.2013.9.10) -> Publish entities Iconator (v1.2013.9.27) -> Optimized asynchronous loading of images and entities MetadataDocumentGenerator (v1.2013.11.6) -> Correct system entities reading with incorrect attribute type Script Manager (v1.2013.9.27) -> Retrieve only custom events SiteMapEditor (v1.2013.11.7) -> Reset of CRM 2013 SiteMap ViewLayoutReplicator (v1.201...Microsoft SQL Server Product Samples: Database: SQL Server 2014 CTP2 In-Memory OLTP Sample, based: This sample showcases the new In-Memory OLTP feature, which is part of SQL Server 2014 CTP2. It shows the new memory-optimized tables and natively-compiled stored procedures, and can be used to show the performance benefit of in-memory OLTP. Installation instructions for the sample are included in the file ‘awinmemsample.doc’, which is part of the download. You can ask a question about this sample at the SQL Server Samples Forum Composite C1 CMS - Open Source on .NET: Composite C1 4.1: Composite C1 4.1 (4.1.5058.34326) Write a review for this release - help us improve, recommend us. Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.1 The following are highlights of major changes since Composite C1 4.0: General user features: Drag-and-drop images and files like PDF and Word directly from own your desktop and folders into page content Allow you to install Composite Form Builder ...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Resources Editor: Resources Editor: Stable releaseWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.Social Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyVeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...New ProjectsASP.NET Web API: ASP.NET Web API is a framework that makes it easy to build HTTP services that reach a broad range of clients, including browsers and mobile devices. ASP.NET WebDungeonPaper: DungeonPaper will be a platform for RPG players to utilize computers to replace traditional pen and paper in their campaigns.EMS: demoEvent Dispatcher: Event Dispatcher is a powershell module for centralized logging. Supports filtering events, and outputs to flat files or the Windows event log.Koopakiller.Numerics: A growing Math-Library for .NET, provided as a portable class library.NetroTrix: NetroTrix is a LAN Messenger Project.....Sharp Explorer: Sort of an alpha Play with C# to make a treeView Windows explorer. Currently multi-threaded dbl click to explore, r-click to preview some text files.TI Sensor Tag Library: A library to access the Texas Instruments Sensor Tag in Windows Store apps with Bluetooth GATT. Written in C#.ULS Log Viewer Feature: "ULS Log Viewer Feature" used by SharePoint Administrators, Developers and SharePoint Site Managers for get easily the real error behind the Correlation ID.Visual Studio Code Line Counter: VS Code Line Counter parses a Visual Studio solution file (.sln), reads each included project, and counts the number of lines in each included file.Vulcanus: TODOWax - The WiX Setup Project Editor: An interactive editor for WiX setup projects.

  Read the article

• What is the simplest way to render video into memory (for drawing to a texture) in .NET?

  - by sebf

  In my project I would like to be able to play back video on surfaces in the world. I intend to do this by having the video frames rendered to a block of memory, then use this to update a texture each frame. Everything is in place - except for the part that actually gets the video. I have looked on Google and found that the video library world is very expansive (and geared towards video processing), and am having trouble finding a suitable one. FFMpeg is very comprehensive, but is an entire suite and would take a good amount of work to integrate. So far the most promising library I've found is the one based on the VLC player libraries - by virtue of it using the same resources as VLC Player it is known to be very capable; it also renders to blocks of memory, but the API (at least of the one on Codeplex) is more of a port of the C++ API rather than a managed wrapper. The 'solution' can be any wrapper/API/library, but with characteristics that make it suitable for use in a rendering engine, namely: Renders the video frame data to memory, so it can be picked up and passed to a texture on the GPU easily. Super simple - all that is needed is a way to load, jump and render a frame programatically - ideally it would use the systems codecs and not require an assortment of plugins. Permissive license (LGPL or more free-er) .NET bindings at least; all the better if it is natively managed Can anyone suggest a lightweight, (.NET) library, that can take a video file, and spit out some frames into a byte[]?

  Read the article

• Wireless keeps disabling or stays disconnected (Realtek RTL8191SEvB)

  - by jindrichm

  I have Realtek RTL8191SEvB wireless card on Ubuntu 10.10: $ lspci -v | grep Network 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) When I load its driver, according to the Network Manager it sometimes blinks with a list of available networks but it keeps disabling itself or it stays disconnected. So, I can't connect to any wi-fi network (which results in frustration). The driver is loaded: $ lsmod Module Size Used by r8192se_pci 509932 0 Looks normal: $ sudo lshw -C network *-network description: Wireless interface product: RTL8191SEvB Wireless LAN Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 10 serial: 1c:65:9d:60:c7:7a width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 latency=0 link=no multicast=yes wireless=802.11bgn resources: irq:17 ioport:2000(size=256) memory:f0500000-f0503fff Configured: $ sudo iwconfig wlan0 wlan0 802.11bgn Nickname:"rtl8191SEVA2" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:130 Mb/s Retry:on RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Is not blocked: $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: yes However something's happening with it: $ dmesg [ 6485.948668] InitializeAdapter8190(): ==++==> Turn off RF for RfOffReason(1073741824) ---------- [ 6486.062666] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.062671] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.062675] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.064091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6486.248761] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.248771] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.248776] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.580083] GPIOChangeRF - HW Radio OFF [ 6486.610085] ============>sync_scan_hurryup out [ 6486.623814] ================>r8192_wx_set_scan(): hwradio off [ 6486.830484] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return So, does anyone know where the problem might be?

  Read the article

• Oracle Customer Experience (CX) Solutions Make Retailers Merry

  - by Tuula Fai

  Tis the season to be jolly. If you’re a retailer, your level of jolliness depends on sales. So you watch trends like U.S. store traffic increasing 3.5% to 308 million on Black Friday but sales actually falling 1.8% to $11.2 billion. Fortunately, by the end of November, retail sales were up 3.7% over the previous year, thanks to life recovering after Hurricane Sandy. And online sales topped $1 billion for the first time ever! Who are the companies improving their sales online? They are big names like Walgreen’s Drugstore.com, Nordstrom’s HauteLook, and Intuit. More importantly, how are they doing it? They use cutting-edge business practices enabled by Oracle’s CX Cloud Service & Support solutions to: Increase conversions rates and order sizes (Customer Acquisition) Enhance customer satisfaction and loyalty (Customer Retention) Reduce contact center costs and improve agent productivity (Operational Efficiency). Acquisition + Retention + Operational Efficiency = Sustainable Growth and Profits. That’s the magic formula for retail customer service success. Don’t take our word for it. Look at the results of these Oracle customers: Walgreen’s Drugstore—30% sales conversion rate on chat sessions with 20% increase in shopping cart size Nordstrom’s HauteLook—40,000+ interactions per month—20% growth over last year— efficiently managed by 40 agents, with no increase in IT costs Intuit—50% increase in customer satisfaction and 70% decrease in cost per interaction Using Oracle’s CX Cloud & Service solutions, these retailers deliver consistent, relevant, and personalized experiences across all touchpoints, including social, mobile, and web. Their ability to connect with customers anytime, anywhere—providing the right answer at the right time—helps them create a defensible advantage in the marketplace. Want to learn more? Please visit http://www.oracle.com/goto/cloudlaunchpad for free resources on delivering exceptional customer service in the Cloud. Also, watch our YouTube channel to learn more about seamless multichannel retail and Winston Furnishings’ exceptional customer experience.

  Read the article

• Awesome and LXDE desktop managers messed up KDE

  - by Caleb1994

  I saw a desktop manager named "Awesome" earlier on Google+, and thought I'd give it a try. In short, I didn't like it, but it got me wondering what other desktops were like, which I hadn't tried. The first one to come to mind was LXDE. I installed that, and tried it. I wasn't a big fan, so I just went to log back into KDE. Only, when I log in, everything is screwy. My theme is weird (although, according to system settings, it is still the same). All the categories and application short cuts in the KMenu are gone, except my favorites, which are now renamed with the "short name", it seems. I know these things are global resources, so it is very likely that one of these Window Managers screwed it up, but I need it fixed. Actually, it seems that after restarting the theme problem fixed itself, but the KMenu items disappearing is still a problem. Does anyone know where these items are stored? (I know they are are just .desktop files somewhere, IIRC, but I don't remember where they are usually stored so I can see if they are still there). I'm hoping it's just a matter of a broken link or something somewhere, not deleted shortcuts... :/ In summary: Any ideas on what caused this? Do you know how to fix the KMenu, or at least where the .desktop shortcuts are stored for the KMenu so I can see if they still exist (crosses fingers).

  Read the article

• Integrated Reporting Is Getting Closer

  - by Evelyn Neumayr

  By John O’Rourke, Vice President, Product Marketing, Oracle Oracle recently sponsored a webcast on CFO.com titled:  The CFO Playbook on Integrated Reporting: Integrating Sustainability into Financial Disclosures which focused on why top companies in the U.S. and overseas are incorporating sustainability content into their annual reports and other financial disclosures.  The webcast speakers, James Margolis, partner with Environmental Resources Management (ERM), a global provider of environmental, health, safety, risk and sustainability consulting services (EHSS) and Mike Wallace, Director of the Global Reporting Initiative's Focal Point USA, discussed the benefits of integrating sustainability reporting with traditional financial reporting. They noted how investors, corporate directors, lenders and most recently, the Securities and Exchange Commission, use this information to better understand, benchmark and value companies. They also talked about the November 2012 release of an Integrated Reporting Framework by the International Integrated Reporting Council (IIRC).  Read the press release and link to the framework here.  The shift towards integrated financial and sustainability reporting is gaining momentum with a number of global stock exchanges endorsing this approach in 2012.  Visit these links to listen to the webcast and download the slides. You can also view a demonstration of Oracle's solution for integrated financial and sustainability reporting. If you’re interested in learning more about this and Oracle’s other sustainability reporting solutions, click here. If you have any questions or need additional information, please feel free to contact me at [email protected].

  Read the article

• Oracle Buys BigMachines - Adds Leading Configure, Price and Quote (CPQ) Cloud to the Oracle Cloud to Enable Smarter Selling

  - by Richard Lefebvre

  News Facts Oracle today announced that it has entered into an agreement to acquire BigMachines, a leading cloud-based Configure, Price and Quote (CPQ) solution provider. BigMachines’ CPQ Cloud accelerates the conversion of sales opportunities into revenue by automating the sales order process with guided selling, dynamic pricing, and an easy-to-use workflow approval process, accessible anywhere, on any device. Companies that use sales automation technology often rely on manual, cumbersome and disconnected processes to convert opportunities into orders. This creates errors, adds costs, delays revenue, and degrades the customer experience. BigMachines’ CPQ cloud extends sales automation to include the creation of an optimal quote, which enables sales personnel to easily configure and price complex products, select the best options, promotions and deal terms, and include up sell and renewals, all using automated workflows. In combination with Oracle’s enterprise-grade cloud solutions, including Marketing, Sales, Social, Commerce and Service Clouds, Oracle and BigMachines will create an end-to-end smarter selling cloud solution so sales personnel are more productive, customers are more satisfied, and companies grow revenue faster. More information on this announcement can be found at http://www.oracle.com/bigmachines Supporting Quotes “The fundamental goals of smarter selling are to provide sales teams with the information, access, and insights they need to maximize revenue opportunities and execute on all phases of the sales cycle,” said Thomas Kurian, Executive Vice President, Oracle Development. “By adding BigMachines’ CPQ Cloud to the Oracle Cloud, companies will be able to drive more revenue and increase customer satisfaction with a seamlessly integrated process across marketing and sales, pricing and quoting, and fulfillment and service.” “BigMachines has developed leading CPQ solutions that serve companies of all sizes across multiple industries,” said David Bonnette, BigMachines’ CEO. “Together with Oracle, we expect to provide a complete cloud solution to manage sales processes and deliver exceptional customer experiences.” Supporting Resources About Oracle and BigMachines General Presentation Customer and Partner Letter FAQ

  Read the article

• A Better Way to Plan, Execute and Manage Enterprise Architecture

  - by JuergenKress

  IT Strategies from Oracle is an authorized library of guidelines and reference architectures that will help you better plan, execute, and manage your enterprise architecture and IT initiatives. The IT Strategies from Oracle library offers two types of best practice documents: practitioner guides containing pragmatic advice and approaches, and reference architectures containing the proven technology patterns to jumpstart your initiative. The IT Strategies from Oracle library can help you establish a reliable set of principles and standards to guide your use of Oracle technology. We will expand this library over time across all of Oracle's technologies. Today, you can access: Overview documents providing an introduction to all the resources available in the library and best practices maturity models Oracle Reference Architectures covering the application infrastructure foundation, management and monitoring, security, software engineering, service-oriented integration, service orientation, user interaction, engineered systems, and a master glossary. Enterprise Technology Strategies for Service-Oriented Architecture offering practitioner guides on creating a SOA roadmap, frameworks for governance, determining ROI, identifying services, software engineering, and white papers. Enterprise Technology Strategies for Event-Driven Architecture offering practitioner guides on creating an EDA roadmap and reference architectures on an EDA foundation and EDA infrastructure. Enterprise Technology Strategies for Business Process Management including practitioner guides on creating a BPM roadmap, business process engineering, governance, and reference architectures on a BPM foundation and BPM infrastructure. Enterprise Technology Strategies for Cloud Computing including reference architectures on a Cloud foundation and Cloud infrastructure. Enterprise Technology Strategies for Business Analytics includes a practitioner guide for creating a BA roadmap, and reference architectures for a BA foundation and BA infrastructure. Get the Oracle Enterprise Architecture content here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: Architecture,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

  - by MoLE

  I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

  Read the article

• Moving From IT to Embedded software Developing

  - by Ameer Adel

  i worked for two years at a channel station, managing various Types of tasks, varying from printers installation, software solution, down to managing and maintaining server automation, to be honest, i always been enthusiastic about programming, i studied at some affordable college and finished my IT path successfully, my graduation project was in C# ADO.NET couple of years ago. Obviously it was so much of a beginner spaghetti code than a well furnished code. I also had the chance; after leaving the IT career, to study about some ASP.NET MVC and web apps development. I have rookie level of coding skills due to the poor level of education i endured, and sufficient resources. Currently i m working as a trainee in a newly opened embedded software development company, that is being said, i am, as i sound, have a little idea about the algorithms included, as i was reading for the past couple of days, embedded system development requires more strict coding skills, including memory management, CPU optimization according to its architect, and couple of other tricks regarding the display, and power management if mobile.. etc. My question is, What type of Algorithms am i supposed to use in such cases, as i mentioned before, i am really enthusiastic about learning programming skills and algorithms related to embedded systems and programming languages, including C/C++, Java, C#, and some EC++ if still operational.

  Read the article

• Do your own design jobs and make it look professional

  - by Webgui

  Looks and design is becoming more and more important for customers and organizations event when we deal with internal enterprise applications. However,  many web developers who work on business apps end up not investing resources on the design. The reason may be that they ran out of time so with their client's pressure there was no choice but to skip past the design process. In some cases, especially in sall software houses, there are no trained professional designers and the developers have to do both jobs. Since designing web applications can be very complex and requires mastering several languages and concepts, unless a big budget was allocated to the project it is very hard to produce a professional custom design. For that exact reasons, Visual WebGui integrated Point & Click Design Tools within its Web/Cloud Development Platform. Those tools allow developers to customize the UI look of the applications they build in a visual way that is fairly simple and doesn't require coding or mastering HTML, CSS and JavaScript in order to design. The development tools also allow professional designers easier work interface with the developers and quicly create new skins. So if you are interested in getting your design job done much easier, you should probably tune in for about an hour and find out how. Click here to register: https://www1.gotomeeting.com/register/740450625

  Read the article

• Stylecop 4.7.36.0 is out!

  - by TATWORTH

  Stylecop 4.7.36.0 has been released at http://stylecop.codeplex.com/releases/view/79972This is an update to coincide with the latest ReSharper. The full fix list is:4.7.36.0 (508dbac00ffc)=======================Fix for 7344. Don't throw 1126 inside default expressions.Fix for 7371. Compare Namespace parts using the CurrentCulture and not InvariantCulture.Fix for 7386. Don't throw casing violations for filed names in languages that do not support case (like Chinese). Added new tests.fix for 7380. Catch Exception caused by CRM Toolkit.Update ReSharper 7.0 dependency to 7.0.1 (7.0.1098.2760)Fix for 7358. Use the RuleId in the call to MSBuild Logging.Fix for 7348. Update suggestion text for constructors.Fix for 7364. Don't throw 1126 for New Array Expressions.Fix for 7372. Throw 1126 inside catch blocks wasn't working. Add new tests.Fix for 7369. Await is allowed to be inside parenthesis. Add new tests.Fix testsCorrect styling issues.Fix for 7373. Typeparam violations were not being thrown in all cases. Added new tests.Fix for 7361. Rule 1120 was logging against the root element and so Suppressions wouldn't work. Fixed and added tests.Updating de-DE resources - from Michael Diermeier - thank you.Change for 7368. Add the violation count into the Task outputs.Fix for 7383. Fix for memory leak in plugins.Update environment to detect ReSharper 7Fix for 7378. Null reference exception from command line run in message output.Update release history.

  Read the article

• Microsoft Press Deal of the Day 11/Oct/2012 - CLR via C#, 3rd Edition

  - by TATWORTH

  Today's Deal of the Day from Microsoft Press at http://shop.oreilly.com/product/9780735627048.do?code=MSDEAL is CLR via C#, 3rd EditionThe deal expires probably 23:59 PT, today 11/Oct/2012. Remember to use the code MSDEAL at checkout."Dig deep and master the intricacies of the common language runtime (CLR) and the .NET Framework 4.0. Written by a highly regarded programming expert and consultant to the Microsoft® .NET team, this guide is ideal for developers building any kind of application-including Microsoft® ASP.NET, Windows® Forms, Microsoft® SQL Server®, Web services, and console applications. You'll get hands-on instruction and extensive C# code samples to help you tackle the tough topics and develop high-performance applications." This is a very through book about Dot Net that I have completed reviewing. I commend it to all C# development teams and to individual developers with at least a year's worth of C# experience. The only drawback is that there should be a VB.NET equivalent book for the benefit of the many programming shops that have chosen VB.NET.For further details about the book see: http://oreilly.com/catalog/9780735627048The author has made some useful source available athttp://www.wintellect.com/Resources/Downloads/PushPin

  Read the article

• Good practices when optimizing HTML5/Javascript Game Developement [closed]

  - by hustlerinc

  I'm just starting out as a game developer and have created a few crappy but playable clones of classic games like pong, and bomberman. Being self taught (bless the internet) I do this by just stuffing in code to make the games work. Now I feel the time has come to create something complete, for this I need to know how a game is structured. I've searched on the web but there isn't that much to be found. The only "high-level" language I know is javascript so reading a tutorial or article based on C++ doesn't help me that much. I'm looking for good resource's pedagogically covering the theory and possibly examples (in Javascript or pseudo code that is understandable for a beginner) of how the game pieces fit together. From the start screen to asset loading and running the game loop. I'm not looking for anything complicated like reading through a 4000 line source code. All I want to learn is where, how and when the main parts of every game should be called. If you know any good resources to share, or maybe even have an answer for me I would deeply appreciate it.

  Read the article

• Why can't WARs share session info?

  - by rvcoutinho

  I have seen several developers looking for a solution for this problem: accessing session information from a different WAR (even when inside the same EAR) - here are some samples: Any way to share session state between different applications in tomcat?, Access session of another web application, different WAR files, shared resources, Tomcat: How to share data between two applications?, What does the crossContext attribute do in Tomcat? Does it enable session sharing? and so on... From all I have searched, there are some specific solutions depending on the container, but it is somehow 'contrary to the specification'. I have also looked through Java EE specification without any luck on finding an answer. Some developers talk about coupling between web applications, but I tend to disagree. What is the reason one would keep WARs inside the same EAR if not coupling? EJBs, for instance, can be accessed locally (even if inside another EJB JAR within the same EAR). More specifically, one of my WARs handles authentication and authorization, and I would like to share this information with other WARs (in the same EAR). I have managed to work around similar problems before by packaging WARs as JARs and putting them into a singular WAR project (WEB-INF/lib). Yet I do not like this solution (it requires a huge effort on servlet naming and so on). And no solution has answered the first (and most important) question: Why can't WARs share session information?

  Read the article

• Twitter "Authentication Error" Turpial & Choqok (latest versions)

  - by PineMarten

  I use Turpial a lot, but Turpial isn't connecting at all. I can still connect to Twitter thru the OS app (no issues signing in through Online Accounts) and of course I can still sign in using the browser, but Turpial gives me an "Authentication Error" and Choqok fails to do anything. I've tried changing my password, revoking the Turpial and Ubuntu apps in Twitter and re-enabling them, but then it gives me an "Invalid Credentials" message. I've even removed and installed Turpial multiple times, still nothing. I can't find any information or resources for this type of error from Turpial online. I think it may be something recent after finding this message elsewhere: (article related to "Birdie") It looks promising i'm currently using it atm, since all the other twitter clients no longer work due to the API 1.0 shutdown (posted today) I've never used Choqok before today, so I don't even know if I've set it up properly. It's failing to retrieve or send Tweets it just blank screens, but at least it signs in. I've figured that this isn't an issue with Ubuntu, or Turpial or Choqok, or the router (already replaced it today), so I don't really know what I'm dealing with here. I hope it's not another API issue, Facebook did something similar just a few weeks ago

  Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >