Search Results

Search found 10603 results on 425 pages for 'device emulation'.

Page 267/425 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• Does the Win XP/7 dual boot "missing restore points" problem apply to systems with separate hard disks for each O/S?

  - by Robert Oschler

  I'm in the process of installing Windows 7/64 on a system with Windows XP/32 on it. During my research, I read about a problem that occurs in the dual boot scenario where Windows XP deletes Windows 7's restore points when it accesses the Windows 7 volume: http://support.microsoft.com/kb/926185 I found a workaround but it seems pretty painful since it appears to involve using the registry to make the Windows 7 volume appear invisible or "offline" to Windows XP, making sharing disk data between the two O/S annoying since you have to use something like an external storage device to get it done: http://www.vistax64.com/tutorials/127417-system-restore-points-stop-xp-dual-boot-delete.html I was wondering if this problem only occurs with systems that have both O/S installed on the same physical hard drive (in different partitions)? In my case, I will have each O/S on a completely separate physical hard drive. Any other tips would be appreciated. -- roschler

  Read the article

• Scanner Installation: Epson Perfection 3170 Photo, Windows 7 & Adobe Acrobat

  - by Galaxy5727

  I installed the Driver v3.04A from Epson's Web site -- epson12180.exe that is supposedly for Windows 7. Now, the scanner works by itself, i.e. if I hit the scan button I get a dialog menu and can scan with one of the options there but not with Adobe Acrobat. What I need is to have it working from Adobe Acrobat when I go File - Create PDF - From Scanner - Custom Scan... The current state is that I see Scanner: "Please select a device" and no other available devices. I remember I used to see at least 2 other like "WIA Epson Perfection" and smth like "Epson Perfection". "WIA Epson Perfection" is the option that I am hoping to see to move on. Scanner: Epson Perfection 3170 Photo System: Windows 7, 64-bit Software: Adobe Acrobat 9 Pro

  Read the article

• Edirol UA-25 driver on Windows 8 Preview

  - by ETFairfax

  I've installed Windows 8 developer preview on a laptop and everything is working apart from my external sound card. The sound card in question is this one, and I've tried downloading and installing the Window 7 drivers from here but no joy so far. As per the instructions I remove the USB cable from the port. I then run setup.exe and (which I have set to run in Windows 7 compatibility mode). It starts doing it's stuff then says "Please insert the USB cable and wait"......that's where things stop! Nothing happens. I don't even here the "ding-dong" of the USB device being recoginised. Obviously I realise that the drivers are for windows 7 and not 8, but was hoping that someone would be able to crowbar it to work!!! Any tips appreciated. Thanks

  Read the article

• Load balancing and HTTPS strategies

  - by Dan

  I am faced with the following problem: Servers get saturated since current load balancing strategy is based on client IP. Some corporate clients access our servers from behind large proxies so all clients appear with same IP to our load balancer. I think we are using some hardware load balancing device (can investigate further if necessary). We need to maintain session affinity (site is constructed in ASP), so all requests with same IP get routed to the same node. Since all the communication goes over the HTTPS, no request data (like session Id) is available to balancer as a client discriminator. Is there a way to use some other data besides the IP to distinguish between clients and route the clients even when coming from same IP to different nodes? Note: I need to maintain the traffic between the balancer and nodes safe (encrypted).

  Read the article

• Symmetrix gatekeepers on Solaris 10

  - by Milner

  I have some Solaris machines that are connected to EMC Symmetrix for SAN storage. Apparently the Symm has a gatekeeper device that is used with the symmetrix CLI. We don't need the CLI, but I have these gatekeeper devices that constantly fill /var/adm/messages and the like with corrupt label errors. Is there anything I can do (short of deleting the devices on machine start) to get rid of them? Or should I just try to get our SAN guy to get the installer for the CLI? These things are getting annoying, and the devfsadmd daemon keeps rediscovering them on boot.

  Read the article

• Wireless Access Point - Can't ping other machines on the wireless network

  - by Surfer513

  I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

  Read the article

• Backup to Synology NAS using rsync or NFS and hardlinks

  - by danilo

  I want to backup data from a Windows (Vista) computer to a Synology NAS (210j). The NAS supports FTP, SMB, NFS and also allows a rsync daemon to be set up. I want to backup different folders to the NAS, but I'd prefer to use the hardlink method to save diskspace (like this script does). With this method, a new folder is created for every backup, but if the file already exists on the target, only a hardlink is created. The filesystem on the Synology device is ext3, so I probably can't use rsyncbackup, as it is made for NTFS. Is there another way to do this backup with hardlink support?

  Read the article

• How to troubleshoot a GPF?

  - by AngryHacker

  I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

  Read the article

• Resizing an iscsi LUN on an EMC under Linux RHEL 5

  - by niXar

  I expanded a LUN on my SAN (from 30G to 50G), and tried all kind of voodoo but it looks like the system still believes the device is still small, despite showing me the new size alright. # blockdev --getsize64 /dev/sdl 53687091200 # dd if=/dev/sdl skip=$(( 31*1024*1024*1024/512 )) count=1|hexdump -C dd: reading `/dev/sdl': Input/output error The dd line works for blocks below the 30G original size. If I reboot, the problem goes away, but I don't want to since the machine has a dozen VMs running. I tried various magic, such as: iscsiadm -m node -R -I iface0 ... to no avail. Note: I'm not using multipath.

  Read the article

• How could two processes bind onto the same port?

  - by Matt Ball

  I just ran into an issue where a request made to localhost:8080 from curl was hitting a different server than the same request made from inside Node. lsof -i :8080 revealed that two processes were both binding onto the same port: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME node 51961 mball 14u IPv4 0xd980e0df7f175e13 0t0 TCP *:http-alt (LISTEN) java 62704 mball 320u IPv6 0xd980e0df7fe08643 0t0 TCP *:http-alt (LISTEN) How is this possible? Were they binding onto different interfaces? Or was it the IPv4 vs 6? If you're curious, node was hitting the other node process, curl was hitting the java process. The java process was started after the node process.

  Read the article

• Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

  - by Ben

  I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess. (Edit - One extra thing that may or may not be relevant: it's the 64 bit version of Server 2008 R2)

  Read the article

• Backup strategy for Windows Server 2008 R2 and Hyper-V

  - by winserveradmin

  I am in the process of planning a Hyper-V deployment with SCVMM 2008 R2. I have several VMs on VMWare Player (temporary solution) for stuff like Sharepoint 2007, 2010, and a couple of other server apps. I want to develop a resilient backup plan for this. On the software side, Data Protection Manager 2010 will support all of the server apps I run (sQL Server 2008 R2, Sharepoint, Exchange, etc). But on the hardware side (storage), what is the best way to go? Drobo seems to have issues with Hyper-V juding by a few threads on here and doesn't support DPM 2010 (which is in beta anyway) but not even the 2007 version (see http://www.drobo.com/support/best_practices.php). What storage device would work well? Do I need a home server or just an external usb drive? Capacity wise, 2tb will probably be best so I can have a small archive and implement a round-robin system. Thanks

  Read the article

• WD My Passport Essential SmartWare External Hard Drive

  - by Acer

  Hi Ive been gifted a My Passport SmartWare External Hard Drive(500gb). I used it and it works fine and installed WDSmartWare The Second time i used it,still fine,but I took it out without using the "Safely Remove Hardware" So the third time I used it,there's a bubble come out that says: USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.For assistance in solving the problem, click this message. I tried connecting it to other USB Ports but it didn't work I tried Uninstalling WDSmarWare and connect it but it didn't work Please help me I like this hard drive so much and I spoilt it easily XD P.S I think about 13% has been used up in the Hard Drive P.S.S Other USBs can work fine in the computer P.S.S.S I tried connecting it to other computer and works fine OMG

  Read the article

• Recovering Pictures & Movies from Formatted Memory Card

  - by Donotalo

  I thought I've copied all of the pictures and videos that I've taken using my digital camera Canon Digital IXUS 860 IS to my computer. Then I format the memory card. Then I found I didn't take all of the files! I don't have any other means of connecting the memory card to computer except via the camera. But the camera doesn't show it as a removable device directly in my computer so programs like Glary Utilities and PC Inspector didn't find the drive. I didn't take any picture after I formatted it. Is there any free software that can help me to get the pictures and videos? My memory card is an 4 GB SDHC card. Thanks.

  Read the article

• Windows 7 won't load unless other harddrives "disconnect"ed in UEFI shell

  - by lmz

  I have three disks, one GPT partitioned containing Windows 7 and Debian, the other MBR partitioned containing CentOS, and the other one MBR partitioned, empty. It used to work (loading Windows boot manager using rEFIt) but now after installing CentOS and OpenIndiana on the second drive, Windows won't boot. The logo is displayed briefly and then a text mode scrollbar "Loading files", then back to the rEFIt menu. The only thing that makes it work is if I drop into the UEFI shell and run disconnect XX where XX is the device handle of the other hard drives (obtained from running devices). This makes me think that the bootloader is getting confused about where the Windows partition is. Is there any information on how the Windows UEFI boot loader finds the Windows partition, or is there any logging I can turn on to help troubleshoot this issue?

  Read the article

• Merit and demerits for various Linux fiberchannel multipath options

  - by wzzrd

  On our Linux servers, we currently use HPs qla2xxx drivers, because it has multipathing (active/passive) built in. The are, however, various other options, like Red Hats device-mapper-multipath with the stock qla2xxx drivers (multibus and failover) and things like SecurePath and PowerPath (both of which can do trunking, iirc). Can someone tell me what the merits and demerits of the various options are (if I can ask such a question), besides the obvious fact that the {Secure,Power}Path options cost vast amounts of money? I'm mainly interested in the freely available options, like HPs qla2xxx vs. Red Hats multipathd and possible other open source solutions, but I would like to hear good reasons to go for the commercial solutions too. UPDATE: I'll be benchmarking various options the coming few days (the average of 10 runs of iozone for each option (options being native qla2xxx failver, native qla2xxx multibus, HP qla2xxx failover)). I'll post a summary of results here for those interested.

  Read the article

• Cannot resize OS X partition

  - by David Pearce

  I am trying to resize my existing Mac OS Extended partition on my Macbook to install Windows 7 (using steps similar to these), but when ever I go to apply the changes, I get this error: Partition failed Partition failed with the error: The partition cannot be resized. Try reducing the amount of change in the size of the partition. The total capacity of the hard drive in question is 260GB, with the entirety being taken up by the OS X boot partition. There is I am aiming to shrink that partition down to 60GB. How can I fix this problem? I have been reducing the amount of change by 10GB each attempt, but it still is not working. I assume the problem is that there is not a large amount of continuous space on the device. Is there some way to can do a manual defrag that would rectify this problem?

  Read the article

• External Hard-Drive Randomly Ejects; Stays On

  - by Kaleb F.

  My 250GB I/O Magic USB external hard-drive randomly disconnects / ejects from the computer after between 2-30 minutes of use. When this happens, the blinking activity light on the front of the hdd turns off; however, the disks can still be heard spinning. Unplugging & replugging in the USB does not reconnect the device and the activity light remains unlit. The only way to continue using it is to flip off then on the power switch of the hdd. The hard-drive was formatted with MBR partition table and 2 NTFS volumes. I recently tried switching to GUID with two Mac OS Extended (Journaled), but the problem remains. This error occurs with my new Macbook Pro with Snow Leopard as well as with my DELL E520 with Windows 7 Ultimate.

  Read the article

• How to remove a partition on a USB drive?

  - by Nathan Long

  I got a free promotional USB stick that I want to format for my own purposes. When I inserted it, it automatically opened a browser and launched a web site. I have since disabled autoplay on this computer so that nothing launches when the stick is inserted. But it still shows up as two separate drives, and one of them is a "CD Drive" that I can't format. How can a USB stick contain a "CD Drive?" And more to the point, how can I remove this partition using Windows XP or Ubuntu? Update I previously asked for an XP solution, but finding none, I have tried Ubuntu, also without success. Gparted doesn't see the "CD" portion as a device at all, and from bash, any chmod changes I try tell me that the file system is read-only. Any ideas?

  Read the article

• How do I use an internal SSD as a scratch disk for FCP X?

  - by andrewb

  I'm contemplating setting up my MacBook Air as a video editing machine. If I do this, I'll upgrade to a 256 GB SSD, and I should be able to keep around 100 GB or more free for video editing. The video files would of course be stored externally, but save purchasing some expensive Thunderbolt RAID device (which I suppose is gradually becoming more of an option), it will be slow for read/writes. How can I have a set up where I take advantage of my SSD's speed for a scratch disk/cache for FCP X, but still have the TB(s) of storage of externals? I don't want to have to be moving files constantly back and forth, this is about saving time not wasting it.

  Read the article

• LVM2 vs MDADM performance

  - by archer

  I've used MDADM + LVM2 on many boxes for quite a while. MDADM was serving for both RAID0 and RAID1 arrays, while LVM2 where used for logical volumes on top of MDADM. Recently I've found that LVM2 could be used w/o MDADM (thus minus one layer, as the result - less overhead) for both mirroring and stripping. However, some guys claims that READ PERFORMANCE on LVM2 for mirrored array is not that fast as for LVM2 (linear) on top of MDADM (RAID1) as LVM2 does not read from 2+ devices at a time, but use 2nd and higher devices in case of 1st device failure. MDADM reads from 2 devices at a time (even in mirrored mode). Who could confirm that?

  Read the article

• Does any know fix/cause of USB drives that lose connection

  - by Burch Kealey

  I have been having significant problems trying to copy files to a USB drive (G0-Flex 1.5 tb) No matter what I use to try to copy the files (python code, Windows copy and paste or Drobo Copy utility) I ultimately get a failure. The failure is always some indication that the device is not ready or able to be written to. I am pretty sure the problem is that the drive is losing its connection. I have done everything I can find so far including setting the USB Root hub to never turn off the power, I updated some usb drivers etc. I have found references to this problem primarily with Win7-64 bit. I have also had USB connection problems with other devices- we kept losing a connection to our Bravo Disc Publisher when we went to Win7 and finally bought a newer model and have not had problems since. Any pointers about diagnosing and or understanding the problem would be appreciated.

  Read the article

• Ubuntu not connecting to network in Hyper-V

  - by soandos

  I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

  Read the article

• Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

  - by GregC

  I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

  Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >