Search Results

Search found 8389 results on 336 pages for 'shared calendar'.

Page 268/336 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• NTBackup (on WS2k3) fails to backup remote server (WS2k8R2) with " Error: is not a valid drive, or you do not have access."

  - by Mark A

  We run an NTBackup job on a Windows Server 2003 R2 SP2 with all updates (as of Q4-2011). It works well backing up two WS2k3 servers as well as the backup server itself. However, we have been unable to successfully back up our Windows Server 2008 R2 machine ("G5-01"). It often runs for about 2GB worth of backup and then dies out with one of the below error messages. It should be more like 20GB for the full server. We have tried using the admin share (C$), an explicitly shared drive share, UNC and mapped drives. The result is the same each time, the only thing that varies is the amount of stuff backed up before it chokes. We've also run NTBbackup from the UI interface, from the command line and as a scheduled task. We are backing up to 400/800GB tapes and they have plenty of space available on them (blank media). Error: \\G5-01\c is not a valid drive, or you do not have access. Error: \\G5-01\c$ is not a valid drive, or you do not have access. Error: Y: is not a valid drive, or you do not have access. Error: Could not access or create backup catalog files. Verify that you have full access to the working folder and there is disk space available. The job is run as Administrator and we have no problems logging onto the server and transferring files. The Event Log on the WS2k8 is not much help, as it has success audits for each login. All of the hardware involved (HP DL360 G3, HP LTO Ultrium 3, Adaptec 39320A) has the latest supported drivers. We've seemingly tried a bunch of different options but are wondering where to look next to resolve the backup issue. We've been super happy with our reliable schedule task for years but this one is stumping us!

  Read the article

• Apache: Isn't chmod 755 enough to set up symlink or alias on Apache httpd on Mac OS 10.5?

  - by eed3si9n

  On my Mac OS 10.5 machine, I would like to set up a subfolder of ~/Documents like ~/Documents/foo/html to be http://localhost/foo. The first thing I thought of doing is using Alias as follows: Alias /foo /Users/someone/Documents/foo/html <Directory "/Users/someone/Documents/foo/html"> Options Indexes FollowSymLinks MultiViews Order allow,deny Allow from all </Directory> This got me 403 Forbidden. In the error_log I got: [error] [client ::1] (13)Permission denied: access to /foo denied The subfolder in question has chmod 755 access. I've tried specifying likes like http://localhost/foo/test.php, but that didn't work either. Next, I tried the symlink route. Went into /Library/WebServer/Documents and made a symlink to ~/Documents/foo/html. The document root has Options Indexes FollowSymLinks MultiViews This still got me 403 Forbidden: Symbolic link not allowed or link target not accessible: /Library/WebServer/Documents/foo What else do I need to set this up? Solution: $ chmod 755 ~/Documents In general, the folder to be shared and all of its ancestor folder needs to be viewable by the www service user.

  Read the article

• SSL Handshake negotiation on Nginx terribly slow

  - by Paras Chopra

  I am using Nginx as a proxy to 4 apache instances. My problem is that SSL negotiation takes a lot of time (600 ms). See this as an example: http://www.webpagetest.org/result/101020_8JXS/1/details/ Here is my Nginx Conf: user www-data; worker_processes 4; events { worker_connections 2048; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 0; tcp_nodelay on; gzip on; gzip_proxied any; server_names_hash_bucket_size 128; } upstream abc { server 1.1.1.1 weight=1; server 1.1.1.2 weight=1; server 1.1.1.3 weight=1; } server { listen 443; server_name blah; keepalive_timeout 5; ssl on; ssl_certificate /blah.crt; ssl_certificate_key /blah.key; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; ssl_prefer_server_ciphers on; location / { proxy_pass http://abc; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } The machine is a VPS on Linode with 1 G of RAM. Can anyone please tell why SSL Hand shake is taking ages?

  Read the article

• Process PHP files from a network share in a vmware virtual machine

  - by nhinkle

  As a testing environment, I have set up a vmware virtual machine running Windows Server 2008 R2. I have Apache and PHP installed (as part of the xampp package). I am doing the development outside of the VM, and so want Apache to serve PHP files from a VM shared folder (which appears as a network share in the VM). I have done this by creating an NTFS symbolic link in Apache's htdocs directory. I can access this directory from the browser, and plain-text files are readable. However, PHP fails to process files, instead returning the following error: Warning: Unknown: failed to open stream: No such file or directory in Unknown on line 0 Fatal error: Unknown: Failed opening required 'C:/xampplite/htdocs/path/to/file.php' (include_path='.;C:\xampplite\php\PEAR') in Unknown on line 0 It appears to be a permissions issue — PHP doesn't seem to be allowed to read the file to process it. However, Apache has no problem opening files in the directory. I cannot figure out how to give PHP the necessary permissions to process the file. Does anybody know of a way to make this work, or else another solution for getting the files into the VM automatically while I develop on the host machine?

  Read the article

• mod_fcgi produces random 500 Errors

  - by DmitrySemenov

  php 5.4.7 via mod_fcgi when I run the site sometimes it works, sometimes it crashed with 500 Internal Error, this is what I see in error.log everytime I run the script [Mon Sep 24 18:50:43 2012] [warn] [client 68.231.194.198] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Mon Sep 24 18:50:43 2012] [error] [client 68.231.194.198] Premature end of script headers: api.php any ideas? vhost config: <VirtualHost :80> ServerAdmin [email protected] DocumentRoot "/home/www/sites/test.com/html/development" ServerName test.com ServerAlias www.test.com ErrorLog "/home/www/sites/test.com/logs/error_log" CustomLog "/home/www/sites/test.com/logs/access_log" common <IfModule mod_fcgid.c> <Directory /home/www/sites/test.com/html/development> Options +ExecCGI AllowOverride All AddHandler fcgid-script .php FCGIWrapper /home/www/php-fcgi-scripts/php-fcgi-starter .php Order allow,deny Allow from all </Directory> FcgidMaxRequestLen 1073741824 </VirtualHost> fcgi.d conf LoadModule fcgid_module modules/mod_fcgid.so # Use FastCGI to process .fcg .fcgi & .fpl scripts AddHandler fcgid-script fcg fcgi fpl # Sane place to put sockets and shared memory file FcgidIPCDir /var/run/mod_fcgid FcgidProcessTableFile /var/run/mod_fcgid/fcgid_shm IdleTimeout 300 BusyTimeout 300 ProcessLifeTime 7200 IPCConnectTimeout 300 IPCCommTimeout 7200 PHP_Fix_Pathinfo_Enable 1 php-fcgi-starter.php #!/bin/sh PHP_CGI=/usr/local/php547/bin/php-cgi PHP_INI=/etc/php547-fastcgi.ini export PHP_FCGI_TIMEOUT=1200 #export PHP_FCGI_CHILDREN=6 export PHP_FCGI_MAX_REQUESTS=1000 exec $PHP_CGI -c $PHP_INI

  Read the article

• Files being rolled back on server 2008 R2

  - by Gary

  I've got a weird situation occurring on my dev server. Randomly, and for no reason that I can see, files are being rolled back to an earlier version! This has happened twice now - the first time I assumed I'd done something wrong somewhere, restored the file I was after from a backup and gave it no further thought. The second time, just now, it happened to a folder containing just a few files that I was working on - suddenly all the changes I'd made over the last day or two were gone! (I know, commit more often, ay?). Thankfully I have a daily backup and so have recovered my files, but I'm very concerned about this and need to understand how and why it's happened. The only change made between file states is that I enabled sharing on a completely unrelated folder. I'm developing an app on Railo, which is running on Tomcat. The code was all fine and in c:\websites\appname. I shared the 'Railo' folder, which is c:\railo in order to allow my IDE access to the logs generated by the app (contained in c:\railo\tomcat\logs) and when I reloaded the app, the code was reverted to a few days ago! I'm at a complete loss here. Can anyone point me in the right direction? Thanks.

  Read the article

• How do I share a complete XP disk so it can be seen from a Windows 7 system? (To move all files to a

  - by Ian Ringrose

  This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it) The XP machine runs XP home and hence has "simple file shairing" turn on. So it seems that even if I create a admin account (with password) and connect with that account, it still comes in as "guest" on the XP machine. Chooseing to share the folder I want access to rather then the top of the disk drive seems to work, but is a pain as I need to share each user's folder with a different share name. If the new computer was not a laptop, I would just plug the hard disk from the old machine into it, but being a laptop I don't have that option.

  Read the article

• how to remove background layer of djvu file

  - by Jon

  Hello, I've downloaded some files from the Internet Archive. They come in different file formats and most of the time I use pdf. However, sometimes the scans are saves in colour instead of b/w. This makes it difficult/impossible to read on a dedicated ebook reader. In that case I downloaded the djvu files as on the PC you can select which layer (color, bw,fore,back) one would like to see. Selecting the bw gives excellent results. However, the ebook reader does not has this option. The question is, how can I remove /extract a layer from the djvu file and save only this layer. So far I've tried the following two approaches: 1) select bw in the djvu viewer on the PC and printed to postscript file. Followed by a ps2pdf conversion. This works, but generates a fairly large pdf file. Sure, I can again upload it to any2djvu but it just seems to much manual work for each file. 2) I tried the shared annotation feature and said (mode bw). This works on the PC as desired but is ignored on the ebook reader as the other layers are still present. Any help or suggestions would be greatly appreciated.

  Read the article

• Glassfish v3 failure when startup. "Cannot allocate memory "

  - by Shisoft

  It is clear in this Question Fail to start Glassfish 3.1: java.io.IOException: error=12, Cannot allocate memory But in my case,I have a 512M memory Ubuntu 10.04 vps.It seems that I don't need to change any configure.But when start the server,I got this exception VM failed to start: java.io.IOException: Cannot run program "/usr/lib/jvm/java-6-sun-1.6.0.22/bin/java" (in directory "/home/glassfish/glassfish/domains/domain1/config"): java.io.IOException: error=12, Cannot allocate memory So,I set <jvm-options>-Xmx512</jvm-options> to <jvm-options>-Xmx400</jvm-options> The exception remains.What did I do something wrong? result of free -m total used free shared buffers cached Mem: 512 43 468 0 0 0 -/+ buffers/cache: 43 468 Swap: 0 0 0 result of cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt 146049: kmemsize 2670652 5385253 51200000 51200000 0 lockedpages 0 8 2048 2048 0 privvmpages 11134 134522 131200 262200 4 shmpages 648 1352 128000 128000 0 dummy 0 0 0 0 0 numproc 12 73 500 500 0 physpages 6519 28162 0 200000000 0 vmguarpages 0 0 512000 512000 0 oomguarpages 6527 28169 512000 512000 0 numtcpsock 4 14 4096 4096 0 numflock 0 5 2048 2048 0 numpty 1 2 32 32 0 numsiginfo 0 3 1024 1024 0 tcpsndbuf 159600 265744 20480000 20480000 0 tcprcvbuf 65536 3590352 20480000 20480000 0 othersockbuf 44232 90640 20480000 20480000 0 dgramrcvbuf 0 12848 10240000 10240000 0 numothersock 22 31 2048 2048 0 dcachesize 0 0 10240000 10240000 0 numfile 1002 1474 50000 50000 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 24 24 2048 2048 0 Thanks

  Read the article

• Dealing with upgrade of libevent on Amazon AWS

  - by Dreen

  I am building an application (in Python) on Amazon EC2 that has a following dependency chain: gevent-websocket ---> gevent ---> libevent The last one (libevent) got upgraded on Sunday and my server is now generating this error: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: libevent-1.4.so.2: cannot open shared object file: No such file or directory Not wanting to spend much time on the issue, I tried to mitigate it by creating a symlink to an always-recent version: $ sudo ln -s /usr/lib64/libevent.so /usr/lib64/libevent-1.4.so.2 But it didn't quite work: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: /usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/core.so: undefined symbol: current_base I am a bit stumped as to how to proceed. Should I create more symlinks? To what? Or is there a better way to solve this problem... PS. For the record I am using Amazon AMI.

  Read the article

• centos install / partitioning

  - by ServerSideX

  I'm using NOC-PS to remotely install Centos 6.2 via KVM / IPMI. I'm going to install cPanel as well and they recommend this layout /boot (99MB) swap (2x server RAM) / (remainder) In the o/s install profile within NOC-PS software, it shows as this: part /boot --fstype ext2 --size 250 part pv.01 --size 1 --grow volgroup vg pv.01 logvol / --vgname=vg --size=1 --grow --fstype ext4 --fsoptions=discard,noatime --name=root logvol /tmp --vgname=vg --size=1024 --fstype ext4 --fsoptions=discard,noatime --name=tmp logvol swap --vgname=vg --recommended --name=swap By the time the default partition setup was done installing Centos, I get this [root@server005 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg-root 532G 907M 504G 1% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 243M 28M 202M 13% /boot /dev/mapper/vg-tmp 1008M 34M 924M 4% /tmp [root@server005 ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Fri Dec 7 18:47:24 2012 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/vg-root / ext4 discard,noatime 1 1 UUID=58b31aaf-5072-4fb1-a858-33bc316fa793 /boot ext2 defaults 1 2 /dev/mapper/vg-tmp /tmp ext4 discard,noatime 1 2 /dev/mapper/vg-swap swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 My question is, how should the NOC-PS install profile look like to get the recommended cPanel partitioning? The server has 16GB RAM, dual 600GB SAS drives and will be used for cPanel shared hosting.

  Read the article

• Sharepoint AD imported users are becomming sporadically corrupted, causing us to have to create a ne

  - by TrevJen

  Sharepoint 2007 MOSS with AD imported users. All servers are 2008. I have around 50 users, over the past 2 months, I have had a handful of the users suddenly unable to login to Sharepoint. When they login, they either get a blank screen or they are repropmted. These users are using accounts that have been used for many months, sometimes the problem originates with a password change. In all cases, the users account works on every other Active Directory authenticated resource (domain, exchange, LDAP). In the most recent case, last night I was forced deleted a user ("John smith") because of corruption. The orifinal account name was jsmith. I deleted him from active directory, then deleted him from the profile list in Sharepoint Shared Services. I could not find a way to delete him from the Sharepoint user list, but I reran the import after recreating his account (renamed it too just to be sure to "smithj"). At first, this did not wor, the user could still access all other resources but Sharepoint. then, some 30 minutes later it inexplicably started working. This morning, the user changed passwords, which immediatly broke the login on Sharepoint again. I am at a loss on how to troubleshoot this.

  Read the article

• Recommend a UK based VPS host equivalent to Dreamhost [closed]

  - by Pez Cuckow

  I appreciate this question could be considered subjective and argumentative so can people make recommendations rather than arguing about the best. I believe the "correct" answer is the one closest to what I am looking for. Basically I live in the UK but have been using the US based Dreamhost for about 6 years now, and my web projects are getting to the scale where the websites need to the UK based to cope with the demand and load. I originally had shared hosting with Dreamhost but upgraded to a VPS a while ago, getting 512mb of RAM, unlimited disk space, bandwidth and domains for $30. Their control panel is a custom easy to use build that they have created in house and offers features very similar to other web panels (as far as I am aware). So basically my question boils down to, is there anywhere that offers an equivalent package? In all honesty as long as I have over 50gb HDD space and unlimited domains it doesn't really matter? Are there any VPS providers you would recommend as reliable? I promise to check every link posted, many thanks for your time!

  Read the article

• Windows 7 - media sharing extremely flakey (XBox 360)

  - by Nathan Ridley

  I have constant headaches with Windows Media Library sharing, which I'm using to share my video library (a whole lot of AVI files on my computer's hard drive) with the XBox 360. I have the whole setup working, so setup and basic configuration is not an issue. The issue is that Windows Media Library frequently fails to notice additions and modifications to the "watched" folders. Not only that, but often after I've added something new to the library, it fails to transmit this new library information to the 360, as is demonstrated by the fact that, using that 360, I navigate to my video library and the new folders don't show up in the list. Often the only way to get the 360 to see the changes is to exit out of "Videos" on the 360, then remove all videos from Windows Media Library, go back into videos on the 360 to confirm that nothing is shared, then re-add a few videos (but not too many) in Windows Media Library, then go back into the videos in the 360. The whole thing is a real pain in the bum and I really wish I could just add all my videos to Windows Media Library and have it keep watch without me having to kick it, and have the 360 pick up changes without me having to constantly rebuild the library. Any ideas?

  Read the article

• Dosbox USB print Windows 8.1 64Bit

  - by eCronik

  Worked fine until I've upgraded to Windows 8.1 as well as made the mail programm working (had to get a windows live ID and have to type in a password now, when starting Windows). I did set the USB printer to lpt1 on the local Windows 8 computer and another XP computer via LAN to lpt2 the same way with the same printer on the Windows 8 computer. But now it doesn't work anymore from the Win8 one (where the printer is plugged via USB). Tried already deleting lpt2: on the XP one, as well as lpt1 on the Windows 8, resetted it. Not working... :-( I tried also net use lpt1: \server\printer password "\user:Ute Berger" /persistent:yes of course with the correct server and shared printer name as well as net use \server\printer "\user:Ute Berger" password /persistent:yes . This is the name displayed as a user now. But in C:\users it is named Benutzer1. Tried this one also. Nothing worked. What could be the problem here? What's strange is that when I type "net use lpt1:" on the XP, I get another error (67 - The networkname wasn't found) than trying something I didn't set up like lpt2 (2 - The system can't find the file). Could this be a possible problem as even if deleted something is left blocking on the Windows 8 computer? Please help me - I tried for hours today but all I've got was frustration... Regards Tim

  Read the article

• Drowning in documents - recommend doc management solutions?

  - by Martin Day

  I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

  Read the article

• Uninstallation of WSUS form SBS 2008

  - by Logik

  I am not much experienced system admin, but i came across the client who was having SBS 2008. The server was running out of HDD space. So to recover some, I removed its WSUS role (twas not needed).this removed WSUS 3.0 SP1 & freed a lot of space. This SBS is: Domian controller, DNS, DHCP, File server. After i removed WSUS i disabled windows update service & i rebooted serer & checked from one of client if the shared folders are accessible. they were. Next day all of sudden i got call from them saying they can't login into their domain. I looked into server, the Active directory service was stopped. I never remember touching any service other than windows update. How come AD service stopped running all of sudden. Is removing WSUS have such impact? I am not aware of any such thing.

  Read the article

• Reset rc.d so software starts at boot again

  - by natli

  I ran the following 2 commands on my VPS box and now it boots without starting any software at all. According to rcconf it's still supposed to start my chosen software (ssh etc.) but it doesn't. update-rc.d vz defaults update-rc.d vzeventd defaults I already tried removing them again with update-rc.d -f vz remove update-rc.d -f vzeventd remove But that didnt't change anything. /etc/rc.local also still correctly lists some scripts I want to run at start-up, but they don't seem to be called either. I expect the top 2 commands to be responsible, but here's everything I did: mkdir /var/openvz-dl cd /var/openvz-dl wget http://download.openvz.org/kernel/branches/rhel6-2.6.32/042stab062.2/vzkernel-2.6.32-042stab062.2.x86_64.rpm wget http://download.openvz.org/kernel/branches/rhel6-2.6.32/042stab062.2/vzkernel-devel-2.6.32-042stab062.2.x86_64.rpm wget http://download.openvz.org/utils/vzctl/4.0/vzctl-4.0-1.x86_64.rpm wget http://download.openvz.org/utils/vzctl/4.0/vzctl-core-4.0-1.x86_64.rpm wget http://download.openvz.org/utils/ploop/1.5/ploop-1.5-1.x86_64.rpm wget http://download.openvz.org/utils/ploop/1.5/ploop-lib-1.5-1.x86_64.rpm wget http://download.openvz.org/utils/vzquota/3.1/vzquota-3.1-1.x86_64.rpm apt-get install fakeroot alien fakeroot alien --to-deb --scripts --keep-version vz*.rpm ploop*.rpm dpkg -i vz*.deb ploop*.deb --force-overwrite update-rc.d vz defaults update-rc.d vzeventd defaults reboot A huge part of that failed because I was running it on an OpenVZ VPS which has a shared kernel that can't be altered, so I also had to fix the dpkg like so (it was moaning about wanting to install vzkernel with a package not being found); rm /var/lib/dpkg/info/vzkernel* dpkg-reconfigure vzkernel --force dpkg --purge --force-all vzkernel But that didn't fix the boot issue either. How do I make my software start at boot again?

  Read the article

• when to upgrade server to include more cores, versus more processors, versus additional server?

  - by gkdsp

  The server hosting market is separated into single, double, qual, etc., processors, where each processor has several cores, or CPUs. My company will offer a Linux-based web application that relies on an Apache web server and a middle tier for business logic. The middle tier is used to crunch math, and return result to a client. Many clients may access the application simultaneously. The company will start with one processor having 4 cores. I'm trying to understand how the app uses the cores and then how to scale the application as business grows, in terms of servers/processors/cores. For example, I'd assume initially one core would be used for Apache, and the other 3 used to process client's requests for math crunching... Question 1: does that mean, with the 3 cores available, I can handle 3 separate client requests simultaneously (e.g. 1 for each of 3 cores)? I mean, except for the shared RAM, is this effectively like having 3 individual machines (from pt of view or processing client requests simulaneously)? Or, only one client's request may be processed at any one time, but that client's request is divided up into up to 3 cores depending on the type of process running that does the math crunching and whether or not it can take advantage of multi threading (so the # of cores impacts how fast any one client request completes)? I'm confused about what the cores mean to the application here. Question 2: As the business grows and more client requests need to be processed, should the server be upgraded to (A) a new machine with more cores, (B) a new machine with two processors, 4 cores each, or (C) keep the original server and add another server with a single processor? Which route provides the most efficient way to scale the application, in terms of processing more client requests per time interval? Is the choice, for example, limited by RAM (when you need more RAM than box can handle it's time to add another server), or something else? Question 3: Is the total number of client requests processed simultaneously equal to the number of cores times the number of servers (minus the one core for Apache)?

  Read the article

• Inbox not updating in Exchange 2010, all users affected

  - by TuxMeister

  I'm battling against this darn issue this morning. We have the following setup: Big Hyper-V machine hosting the servers as VM's VM for CAS: WEB.XXX.local VM for Mailbox: EXC.XXX.local Servers are running Server 2008 R2 with Exchange 2010 SP1 Clients are all running Windows 7 Pro x64 with Outlook 2010 x64 The problem we're having is that nobody is able to see any emails received today (16th of October), but they are able to send externally. When I reply back to the email received externally, I don't get an NDR, yet the user cannot see my email. This is what I found and tried thus far: If we create a subfolder in Outlook 2010 and move any email from the inbox into that folder, changes will be immediately reflected in OWA We've been sending test emails to other users internaly and external email addresses and the sent items folder contains all those tests, synced properly to OWA as well Have tried crating a new profile, new emails are still missing Tried disabling Cache Mode, still no luck Also disabled "Download shared folders", still no luck Tried to setup a brand new Exchange mailbox and configured it on a VM that never had Outlook on it, still the same issue Tried restarting Exchange services on both CAS and Mailbox servers, no luck Tried rebooting both CAS and Mailbox servers, still no luck Performed a Mailbox Discovery on my admin account, emails from today are being found in the Discovery results, so the stuff is there, just not updating the user inboxes Any idea about what this hellish thing can be? I've done everything I can think of and also everything I could find out there. Let me know if you need any more details and thanks for reading this!

  Read the article

• Clone Microsoft VM > SharePoint issues

  - by Rob

  Hi, We have an existing (production) Hyper-V VM that I want to clone to create a staging server. This server is NOT on a domain/active-directory - uses all local computer accounts. It is Windows 2008 OS, SharePoint 2007, SQL server 2008, Reporting Services, and some custom line-of-business web-applications. We rename the server etc as per the documentation we have, but are having troubles specifically with SharePoint. Some of the sites do not come up, and some issues adding/updating site settings such as site owners. Does anyone know of a definitive resource to this process? thanks Update: We seem to have most working, but the Shared Service Provider, and the SSP's admin site, are not working. In addition, the custom web-parts that reference IIS Session objects are failing (which seem to be related to the Share Service Provider). All the Windows user accounts for various services are renamed during the server cloning, but the windows account names in SQL server are not automatically changed. We've tried to change them in SQL server but still does not seem to work Seems like allot of work - and am thinking that there must be some guidance out there. also getting this: NullReferenceException: Object reference not set to an instance of an object.] Microsoft.Office.Server.Administration.SqlSessionStateResolver.System.Web. IPartitionResolver.ResolvePartition(Object key) +135

  Read the article

• How to find what files / directories are not copied yet?

  - by user8676

  Hi all, I found the following 'nice' situation: An archive of few disks (actually three disks) which has a bunch of photos (more or less) organized. Well, this is good. A big disk shared on a network which has a bunch of photos which has another folder structure (even if is somewhat recognizable for a human being) than the archive described above, but some of the files on this big network share are the same with the files from the archive. Well, this is bad. What we need is to move the different (new) files from the network share in the archive (perhaps we'll use for this a new disk added to archive). The program that we need is different from a regular File Duplicate Finder program because usually the File Duplicate Finder finds the duplicates from all sources comparing each file with another. We want to find the differences between the two sources. It is fine for us to have a report generated in text file which after this we'll use to do our move. A Windows solution will be preferred. Any ideas? TIA

  Read the article

• Assigning cores to VM in vSphere

  - by user114933

  Complete vSphere newbie here... Background: So, I have a 12 core machine with 24 VMs on it. Currently, all the processing power is shared between these VMs equally. The question: Can I configure one VM to be given two CPU's worth processing no matter what's happening on the other machines? My Research: I tried two things in vSphere... I set the reservation and limit on one VM to equal the same as two cores. To test if my objective was being reached, I measured the time it would take to gzip a file when other VMs were running nothing and when other VMs were running CPU intensive operations. I expected the time to gzip the file would be the same because this VM gets priority for some processing. Unfortunately, the time taken to gzip the file when other VMs were running something was significantly more than when other VMs were not running anything. I tried setting the Hyperthreaded Core Sharing mode to Internal hoping that this would mean that my VM would get at least an entire core to itself. This did not work either. Thanks in advance!

  Read the article

• ubuntu's average load never below "0.00 0.01 0.05"

  - by Karma Fusebox

  I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

  Read the article

• Is there a limit to how many sites can be hosted on a single IP address when using HTTP Host Headers on Windows 2008?

  - by Kev

  For reasons that are lost in the mists of time, our older Windows (2000, 2003) servers have been configured with a "Administrative" IP address and three further "Hosting" IP addresses. There are also additional IP's for sites with SSL certificates. The "Administrative" IP address is where all our internal provisioning, monitoring and other such apps are bound to. We lock this down and don't permit access to it from the outside world (other than over our VPN). The three "Hosting" IP addresses are used for IIS website hosting (in conjunction with host headers). Historically, new site IP address allocations have been rotated through these three IP addresses. I'm not really sure why. I'm building a new batch of servers and I'm considering just having a single hosting IP address. Our servers can host up to 1200 sites on a single machine. Is there a technical limit to the number of IIS sites that can bind to a single IP address? Our Linux platform seems to do just fine with just a single shared IP + host headers. I initially thought this might be an SEO thing, but given that IPv4 address space conservation is paramount I hardly think Google or other search engines could reasonably penalise site rankings just because hundreds of sites hang off the same IP.

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >