Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 271/1617 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

  • Can't see a Windows XP computer on the network

    - by user56614
    I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

    Read the article

  • 'hijacking' gui and mapping certain controls to certain functions. VNC. TouchOSC

    - by Nick
    I need a VNC LIKE application which rather than sharing the screen, can take control of a specific application and then share that functionality across a network to multiple clients. Obviously, VNC requires use of the mouse and therefore only one user can do something at one time, this is NOT what I am after. I am after something that can hijack the graphic user interface, map certain controls, and then display them in another piece of software (perhaps like TOUCHOSC) The software I would like to map and share is called YAMAHA STUDIO MANAGER and is used to control certain Yamaha audio hardware, and in my case a Yamaha LS9 and M7CL mixing console. Its free.

    Read the article

  • Subnet address in apache access log

    - by m0ntassar
    I was inspecting my apache access logs(I use default combined log format) and I came a cross a wired entry 69.171.247.0 - - [22/Oct/2012:18:15:20 +0200] "GET /some site resources HTTP/1.1" 404 514 "-" "facebookexternalhit/1.0 (+http://www.facebook.com/externalhit_uatext.php)" As u see, this query come from a facebook robot that extract objects from site when somebody post a link. What I find weird is the logged ip address : 69.171.247.0 Does anybody know how is that possible ?

    Read the article

  • Unable to ping between subnets and out to internet

    - by battlemidget
    My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

    Read the article

  • External WiFi Adapter for Eee PC 1000?

    - by Peter M
    I have an original Eee PC 1000 running the stock Xandros. I have run into problems where the internal WiFi card does not seem to have enough sensitivity to connect to a lot of access points. Although the computer will report APs in the area, unless the signal strength is over 80% (as reported by the Wireless networks application) I cannot seem get a connection. So is there a recommended USB WiFi adapter that is known to work with the Eee PC/Xandros system or in general with a Debian based system?

    Read the article

  • Problem with connecting two different networks

    - by tanascius
    I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

    Read the article

  • Is it possible to cause artificial network packet loss or latency?

    - by nbolton
    I'm trying to reproduce some issues on a deployed application where the MSSQL server and client are running in two separate machines. I think there may be network issues between the two machines, so I'd like to try and reproduce these conditions on two Hyper-V virtual machines (on the same virtual server). Of course, the network for these virtual machines is "local" so it's actually far from the conditions in a live environment. Is there a program I can run on either virtual machine which will degrade the network performance? Or maybe any other work arounds? For example, one way to reproduce the conditions may be to run the VMs on separate Hyper-V servers in geographically dispersed locations (so the SQL traffic goes over VPN or something) -- but this is a little long winded I think. There must be a simpler way.

    Read the article

  • Cannot access internal website after being connected to other network

    - by Dandroid
    I have a client who claim they cannot access their internal website when they have e.g. been out traveling. They have to reset their browser settings every time to be able to get access again. As they live on another continent and timezone it's hard for me to run live tests with them to see what changes in their browser settings. My first guess would be it's some sort of Proxy related issue, but I want to know if there could be other reasons for this? It's not the LAN itself, that we are sure of. It's browser specific only. Edit It's worth mentioning that it only happens when they turn off/restart their computers.

    Read the article

  • How can I disable internet for a specific interface in Windows 7?

    - by MGSoto
    I have two NICs on my machine, one which connects to my network and has my internet connection. The other connects to a buddy next doors network with his internet connection. I don't want Windows magically deciding which internet connection to use, I want it to use mine. I've had some success by blanking out DNS servers for his connection, but then I also lose hostname resolution on his network and I realize this doesn't solve everything 100%. How can I force Windows to use only my connection while avoiding the use of a router?

    Read the article

  • 2 routers at home- how to connect with VNC?

    - by Charles Leviton
    I have two routers at home. First router is upstairs and is connected to the cable modem. 2nd router is downstairs and acts as "signal booster" for the 1st router. Devices connected to the upstairs router have IP addresses of the form 192.168.1.n Devices connected to the upstairs router have IP addresses of the form 192.168.2.n. I blindly followed instructions from a website to do this set up, just glad it works! Upstairs I have a PC running Win 7 64 bit. Its assigned IP is 192.168.1.7. I have a VNC viewer running on this. Downstairs I have a 2nd PC running Vista 32 Home edition bit that is connected to the 2nd router and has IP Address 192.168.2.114. VNC server is running on this. It's listening on 5900. There is no firewall. When I try to connect to this downstairs PC from upstairs it fails with message "Failed to connect to server". I cannot ping to this either. If I try to connect to this downstairs PC using VNC Viewer from another computer that's connected to the same downstairs router then it works like a charm. So what's the work around if the viewer is on a different "network"? I don't have any problems doing remote desktop connection from the downstairs PC to the upstairs PC even if they are connected to different routers. Router information- Upstairs- ASUS RTN13U, downstairs- DD-WRT v24 RC-5 Thanks! P.S. I posted this on the Ultra VNC forum as well but that doesn't seem to have a lot of activity, so taking the liberty to multipost.

    Read the article

  • scp using a password on the command line

    - by spierepf
    I am trying to write a script that will deploy a build created on my desktop machine (windows/cygwin) to a machine in my test environment (linux). I would like to use scp to copy the build to the target machine. The only account on the target machine is root, and I cannot create a special user for this task. The root user is unable to log in using an ssh key (I suspect that this is configured on the ssh server, but I do not know which configuration options control this). At any rate, I cannot change the configuration of the ssh server. My desktop machine uses Cygwin, and I have ssh installed. What I need is the command-line-fu that will allow me to put the password on the command line. I am aware of the dangers of having a plaintext password in a shell script, but that is not a concern here.

    Read the article

  • How do you use Time Capsule for MAC controlled Internet?

    - by Kevin Perttula
    I'm using an Internet Provider that requires a username and password to log in; the prompt shows up as soon as you open a web browser. Because of this, I can only have one device online at a time. How can I get my Time Capsule to essentially log in as the user and allow other devices to connect through it. My Time Capsule has worked with other ISPs that don't require the user log in, but I recently moved. I may be wrong about how the ISP is allowing access, I wasn't sure how to describe the problem. Thanks.

    Read the article

  • Mark packets across computers?

    - by eudemo
    I use Transmission on Ubuntu and I'm having this issue, which basically says that QoS is broken because there is no way to limit which outgoing ports uses. I was thinking of doing a dirty and ugly hack and create an interface alias and define QoS based on source address, but was wondering if is there another way. Is it possible to mark the packets on the original machine in some way, using the owner and mark modules of iptables and sending this to the router who does the QoS? From what I understand, mark on iptables only applies to the local machine, so this will not work, but is there another way?

    Read the article

  • Do I have to use a DNS PTR?

    - by JrSysAdmin
    I am currently working on a site in my free time with a few other guys and we are wanting to redirect xxx.com to our new site, yyy.com. So we have xxx.com set to redirect the 216.111.11.1 which is the IP for yyy.com. However, this just says the website is unavailable so it seems as though we need a DNS PTR to redirect 216.111.11.1 to yyy.com. Is there any way to do this without a DNS PTR? The pointer will cost us $15 and it just seems like there should be some better way to go about doing this. Any ideas?

    Read the article

  • How to make XAMPP virtual hosts accessible to VM's and other computers on LAN?

    - by martin's
    XAMPP running on Vista 64 Ultimate dev machine (don't think it matters). Machine / Browser configuration Safari, Firefox, Chrome and IE9 on dev machine IE7 and IE8 on separate XP Pro VM's (VMWare on dev machine) IE10 and Chrome on Windows 8 VM (VMware on dev machine) Safari, Firefox and Chrome running on a iMac (same network as dev) Safari, Firefox and Chrome running on a couple of Mac Pro's (same network as dev) IE7, IE8, IE9 running on other PC's on the same network as dev machine Development Configuration Multiple virtual hosts for different projects .local fake TLD for development No firewall restrictions on dev machine for Apache Some sites have .htaccess mapping www to non-www Port 80 is open in the dev machine's firewall Problem XAMPP local home page (http://192.168.1.98/xampp/) can be accessed from everywhere, real or virtual, by IP All .local sites can be accessed from the browsers on the dev machine. All .local sites can be accessed form the browsers in the XP VM's. Some .local sites cannot be accessed from IE10 or Chrome on the W8 VM Sites that cannot be accessed from W8 VM have a minimal .htaccess file No .local sites can be accessed from ANY machine (PC or Mac) on the LAN hosts on dev machine (relevant excerpt) 127.0.0.1 site1.local 127.0.0.1 site2.local 127.0.0.1 site3.local 127.0.0.1 site4.local 127.0.0.1 site5.local 127.0.0.1 site6.local 127.0.0.1 site7.local 127.0.0.1 site8.local 127.0.0.1 site9.local 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local httpd-vhosts.conf on dev machine (relevant excerpt) NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost ServerAlias localhost *.localhost.* DocumentRoot D:/xampp/htdocs </VirtualHost> # ======================================== site1.local <VirtualHost *:80> ServerName site1.local ServerAlias site1.local *.site1.local DocumentRoot D:/xampp-sites/site1/public_html ErrorLog D:/xampp-sites/site1/logs/access.log CustomLog D:/xampp-sites/site1/logs/error.log combined <Directory D:/xampp-sites/site1> Options Indexes FollowSymLinks AllowOverride All Require all granted </Directory> </VirtualHost> NOTE: The above <VirtualHost *:80> block is repeated for each of the nine virtual hosts in the file, no sense in posting it here. hosts on all VM's and physical machines on the network (relevant excerpt) 127.0.0.1 localhost ::1 localhost 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local None of the VM's have any firewall blocks on http traffic. They can reach any site on the real Internet. The same is true of the real machines on the network. The biggest puzzle perhaps is that the W8 VM actually DOES reach some of the virtual hosts. It does NOT reach site2, site6 and site 9, all of which have this minimal .htaccess file. .htaccess file <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </IfModule> Adding this file to any of the virtual hosts that do work on the W8 VM will break the site (only for W8 VM, not the XP VM's) and require a cache flush on the W8 VM before it will see the site again after deleting the file. Regardless of whether a .htaccess file exists or not, no machine on the same LAN can access anything other than the XAMPP home page via IP. Even with hosts files on all machines. I can ping any virtual host from any machine on the network and get a response from the correct IP address. I can't see anything in out Netgear router that might prevent one machine from reaching the other. Besides, once the local hosts file resolves to an ip address that's all that goes out onto the local network. I've gone through an extensive number of posts on both SO and as the result of Google searches. I can't say that I have found anything definitive anywhere.

    Read the article

  • Everytime I ping my server, it is pinging localhost instead?

    - by esac
    I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

    Read the article

  • Bridging networks problems

    - by Eric
    In my setup I have 3 computers and 2 (wireless d-link) routers. Computer1 has ethernet and wireless interfaces ethernet : 192.168.0.x (DHCP) wireless : 192.168.10.254 (static) Computer 2 has ethernet with two ips ethernet1 : 192.168.0.90 (static) ethernet2 : 192.168.10.110 (static) Computer 3 is a particular device with a hardcoded ip that I can't change wireless : 192.168.10.41 (static) Router1 manages internet and DHCP for network 192.168.0.0/24 Router2 is more complicated. I don't use DHCP. I use it to bridge between both networks. Its static ip is 192.168.10.1 Computer1 can ping Computer2. Computer1 can ping Computer3. Computer1 can ping Router1. Computer1 cannot ping Router2. Computer2 cannot ping Computer3. Computer2 can ping Router2. Router1 can ping Router1 Router2 can ping Computer2 Router2 cannot ping Computer1 Router2 cannot ping Computer3 This is very weird. Router2 manages the wireless connection, it should be able to ping its own computers right? My question is obviously : How can I make it so Computer2 can access everything else. This is a traditional case of "it was working before christmas and now it doesn't". The ethernet wiring is as follow : [ Computer1 ]----[ Router1 ]---[ Router2 ]---[ Computer3 ] I am using switch (lan) ports on Router1/2.

    Read the article

  • Wireless Disconnects Randomly, then won't reconnect

    - by Nironan12
    Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

    Read the article

  • College wifi works easily on Linux, but not on Windows

    - by user52849
    In Linux: After connecting to the college wifi, going to the network login page logging in, the internet works perfectly as it should. In Windows: After connecting to the college wifi, going to the network login page, logging in, Windows shows "Internet access" and the wireless icon turns white. But still after that, regardless of the browser being used, attempting to accessing any page just shows "Sending request". It does work though after a lot of tries, but only in intervals. But when running Ubuntu 11.10 in VirtualBox, it works properly just like booting in Ubuntu, even if it isn't working on Windows. The college wifi service is really crappy and has been unable to solve this problem. I'm pretty sure there should be a solution for this, but what? What is it that Ubuntu is doing right and Windows isn't? Windows settings set to "Automatically detect settings" and no proxy server used.

    Read the article

  • Zune HD won't wirelessly sync with my laptop

    - by Keith
    I've got a zune hd and I am having trouble getting it to sync with my laptop. I have gone through the procedures listed on their webpage (http://www.zune.net/en-us/support/usersguide/musicvideospictures/troubleshootwireless.htm) but still can't get it to work. Any ideas?

    Read the article

  • Can I connect two routers to one switch?

    - by vanneto
    I want to connect two routers to a switch which will then be connected to a modem. Now as far as I know a switch does not do network translation and this won't work with one IP address. So I bought two addresses at my ISP. Attached is a simple schematic that explains what I want to do. Is there any additional configuration needed on either of the routers (Linksys WRT54GL) to make this work or will it "Just Work"?

    Read the article

  • Routing between two networks on linux?

    - by gGololicic
    I got stuck with one problem I cant find solution. I have linux pc with two NIC. first nic (eth1) is connected to public ip (probably switch or whatever, doesnt really mater) so eth1 is connected to wan and another eth0 that I connected to switch and make it a lan nic. configuration: eth1 ip address 88.200.1xx.xxx //xxx's are cuz of security reasons eth0 ip address 192.168.1.1 wan ------ [eth1 (linux PC) eth0]<----[switch]<---- [eth1 (PC1)] Now I want to connect this two networks, so PC1 can access linux PC and wan. I think I know how to do it but I cant confiugre it right. This is what I tried: I turend on ip forwarding (for sure) I set eth1 default gw to the right ip on the wan I tried to set eth0 default gw to the same ip (but i couldnt) What or how can I do this, I was trying with linux route command, but I got stuck. Please help.

    Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >