Search Results

Search found 18437 results on 738 pages for 'screen reader'.

Page 269/738 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• Can't use nvidia card/driver on optimus notebook

  - by Mr. Pixel

  I installed (once again) the latest official nvidia driver for my GT540m on Ubuntu 11.10. Even though everything seems OK with my xorg.conf file (I've manually added BusID "PCI:1:0:0", since lspci shows 01:00.0 for my GPU). The problem is, when I use the xorg.conf file generated by Xorg -configure, Xorg automatically loads the Intel GPU. So I removed everything that was not related to my nvidia card, basically leaving my xorg.conf with one screen and one device (with the nvidia driver and the above-mentioned BusID), and Xorg fails to start. The log says something like "Devices on GT540m [newline] none" And a few lines later, something like "NVIDIA(0) found a screen, but have no device for it". When I don't set the BusID, it doesn't seem to detect my card either. Thank you for any suggestion. PS: If possible, I'd like to avoid bumblebee or any similar "hybrid graphics" solution, last time I tried I ended up reinstalling Ubuntu. Edit: Allow me to clarify the problem. I have a notebook with a GT540m graphics card, and an integrated intel gpu. I want to use the graphics card with full hardware acceleration and its official driver, as I do under windows.

  Read the article

• Can't start webcam for google video services

  - by wisemonkey

  I've got Ubuntu 11.10 64 bit and have installed the google video chat plugin. However webcam doesn't seem to work (black screen -- no video at all). For cheese it works but shows really bad (black and white kinda) image. Following some link I installed guvcview if I start it then image looks neat. Any suggestions on how can it be fixed? If it helps I've tried the solution: $ sudo mv /opt/google/talkplugin/GoogleTalkPlugin /opt/google/talkplugin/GoogleTalkPlugin.old $ sudo gedit /opt/google/talkplugin/GoogleTalkPlugin and putting following lines in: #!/bin/sh LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old OR #!/bin/sh LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old Cause I've both files. Finally $sudo chmod +x /opt/google/talkplugin/GoogleTalkPlugin.old I closed and reopened chrome then started gmail tried video call -- black screen :-/ Ok so today finally google+ provided me with trouble shoot link and advised me: The plug-in won't install If you're having trouble installing the plug-in, or are receiving a message asking you to reinstall it, you should check to make sure your configuration is right. To do so simply: Check to make sure the Google Talk Plugin Video Accelerator and Google Talk NPAPI Plugin are enabled. If you're using Chrome you can type about:plugins in your browser to display your plug-ins. Make sure you're not using Internet Explorer 64-bit (this is a browser version that is 64 bit as opposed to 32 bit). Ensure that you don't have any "click to run" extensions enabled. If you're still experiencing this issue after checking your configuration you can follow these steps: Refresh the browser page. Close any running Google Talk plug-in processes. Close all open and running browser processes. Restart your computer. Uninstall and then reinstall the plug-in. Try a different browser such as Google Chrome or Mozilla Firefox. I looked in about:plugins for chrome and firefox: I don't have Google Talk NPAPI Plugin, does that matter? and I thought its installed with google talk plugin or no?

  Read the article

• Desktop Fun: Star Trek Wallpapers

  - by Asian Angel

  If you are a Star Trek fan then doubtless you have a favorite series and starship(s) that you love. Get ready to enjoy viewing the fleet of ships that we have gathered together for you in our Star Trek Wallpaper collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. Note: This particular wallpaper can be trimmed up height-wise to fit your monitor’s size very nicely. For more fun wallpapers be certain to visit our new Desktop Fun section. Looking for some great icons to go with your new Star Trek wallpaper? Then be certain to check out our Sci-Fi Icon Packs collection here. Similar Articles Productive Geek Tips Desktop Customization: Sci-Fi Icon PacksWindows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Starscape Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff

  Read the article

• I'm stuck on User Defined Session destop environment

  - by Dan

  I just installed Ubuntu for the first time dual boot so I get to choose Ubuntu or windows. I then changed the setting where is doesn't ask for my password when booting up. I then installed Edubuntu desktop package. I then hit system and logged out that way i could be at the loggin screen that also lets you select the desktop environment. Edubuntu was not there but User defined session was so i clicked that thinking that might be Edubuntu and logged in. Now im totally stuck. Only walpaper on the screen as i realize now that is normal for user defined session but there is no log out button to change desktop environments now and since I set it to not ask for password at boot up there is no option to change it at start up. If i hit ctrl+alt+del it only lets you shutdown, restart, suspend, or hybernate.... no logg out. I have hit every key on the keybourd hoping something will pop up. I thought this must be a simple noob mistake that there must be endless artiles about this so did searches on google and forums and was shocked to find nothing about this. My next step unless someone can help is to uninstall and reinstall.

  Read the article

• Can't shutdown Ubuntu (Wubi Installation)

  - by zsgre3nd3s7

  I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

  Read the article

• Precision loss when transforming from cartesian to isometric

  - by Justin Skiles

  My goal is to display a tile map in isometric projection. This tile map has 25 tiles across and 25 tiles down. Each tile is 32x32. See below for how I'm accomplishing this. World Space World Space to Screen Space Rotation (45 degrees) Using a 2D rotation matrix, I use the following: double rotation = Math.PI / 4; double rotatedX = ((tileWorldX * Math.Cos(rotation)) - ((tileWorldY * Math.Sin(rotation))); double rotatedY = ((tileWorldX * Math.Sin(rotation)) + (tileWorldY * Math.Cos(rotation))); World Space to Screen Space Scale (Y-axis reduced by 50%) Here I simply scale down the Y value by a factor of 0.5. Problem And it works, kind of. There are some tiny 1px-2px gaps between some of the tiles when rendering. I think there's some precision loss somewhere, or I'm not understanding how to get these tiles to fit together perfectly. I'm not truncating or converting my values to non-decimal types until I absolutely have to (when I pass to the render method, which only takes integers). I'm not sure how to guarantee pixel perfect rendering precision when I'm rotating and scaling on a level of higher precision. Any advice? Do I need to supply for information?

  Read the article

• Run Windows Store Apps in a Window on the Desktop in Windows 8?

  - by Kirk

  Is it possible to run Windows Store apps in a window on the desktop in Windows 8? For example, I think the Finance app is awesome, I just don't want it to occupy dedicated space on my screen (either taking the full screen, or snapped to the side). It would be great if I could run it in a window on my desktop. Is this possible? I'm think developers need to view/run/build their apps in a desktop window in order to work productively. Is this the case?

  Read the article

• Redhat 6 gui installation VS kickstart gives me different packages?

  - by jonaz

  If i do the graphical install and select basic server + aide and screen i get a system with 535 installed packages. If i look at the /root/anaconda-ks.cfg file in that freshly installed system i see: %packages @base @console-internet @core @debugging @directory-client @hardware-monitoring @java-platform @large-systems @network-file-system-client @performance @perl-runtime @security-tools @server-platform @server-policy @system-admin-tools pax python-dmidecode oddjob sgpio certmonger pam_krb5 krb5-workstation nscd pam_ldap nss-pam-ldapd perl-DBD-SQLite aide screen If i then install a NEW system using a kickstart only containing those packages i get 620 installed packages. So basicly my question is why does the system install almost 100 more packages when using kickstart compared to the GUI installation when the exact same packagegroups are selected?

  Read the article

• Humble Bundle Gives You DRM-Free Games at Pay-What-You-Want Prices

  - by Jason Fitzpatrick

  The Humble Bundle is back–score cross-platform games at a pay-what-you-want price and even send the proceeds to charity in the process. Between now and April 2nd, score great independent games like Zen Bound 2 and Avadaon: The Black Fortress with a name-your-price deal courtesy of The Humble Bundle. You pay what you want and specify how you want the money divided among the developers and the Electronic Frontier Foundation/Child’s Play charities. Check out the video above to see the games included in the bundle. All games are cross-platform, available for Windows, Mac, Linux, and Android, and DRM-Free. The Humble Bundle The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume Make Your Own Windows 8 Start Button with Zero Memory Usage Reader Request: How To Repair Blurry Photos

  Read the article

• Removed Java replaced with newest "Sun Java", disc won't boot, and won't let me re-install grub using boot repair disc

  - by Al Rowe

  Had a minor problem with my Stock market platform. Set-up screen would freeze program. Called their tech support, got their "Linux guy", who advised remove all Java and replace, not with synaptic version, but newest Sun Java. After removing, computer auto rebooted, and went to blue mem-test screen. Showed no errors, but couldn't get back in. Tried two versions of boot repair disc from iso (checked md5sum, showed good.), but fix aborted, giving apt-error detected. Opened a terminal and typed (or copy/paste): sudo chroot "/mnt/boot-sav/sda1" apt-get -f install. My system is Ubuntu 12.04. Had a few very minor issues from install, all fixed. Also added some of my favorite gnome tricks just to make life easier, but none that could have caused this. Added script to add shortcuts to desktop, open terminal in any menu from inside it, access root terminal, etc. System was firewalled and using avast antivirus (o.k., I'm paranoid. Used to do Windows sys-op and security.) But relative newbie to Linux.

  Read the article

• MySQL - Configuration

  - by Stuart Brierley

  Having previously detailed how to install MySQL Server, the next step is configuring MySQL. The MySQL configuration wizard can either be run immediately following installation from the MySQL installation wizard or manually from the Start Menu. Following the splash screen you can then choose whether to run a detailed or standard configuration. The detailed configuration allows you to create the optimal configuration for your specific machine, whereas the standard configuration creates a general configuration that can then be manually tuned. I chose detailed.   You are then asked to choose the type of server instance that is being configured. In this case it is a developer machine. Following this you are asked to choose the type of database usage that you expect on the server. I opted for multifunctional. You must then specify the location of the InnoDB tablespace.   Next specify the number of concurent connections to the server.   Now you must configure the networking options. I left the Strict mode enabled as this is the recommended option, but I disabled TCP/IP networking as I wanted to restrict this MySQL installation to the local machine only.   Set the character set that is best suited to your use - for me this was the default standard character set. Next up is the option to run MySQL as a service and whether or not to include the mysql dircetories in the windows PATH. I kept the install as a windows service option enabled, but unchecked the Launch MySQL server automatically option. This is because I only wanted MySQL running when I specifically want to use it. I also enabled the include in windows PATH option.   You can then change the security settings for the mysql installation. I opted to change the root password, disable root from local machines and disable annoymous access.   You are now ready to execute the configuration.   Once completed you should hopefully see the completed screen with lots of nice ticks against the various configuration tasks.

  Read the article

• How can I have 2 users working on the same PC at the same time

  - by Sharon Cook

  I have a pc/machine that has its own ip address and it can be connected to by certain external PC's through our firewall. User A has a RDP connection from say Germany directly to the PC - his ip number is allowed through our firewall to connect to the PC. He now wants User B to connect at the same time so that User B can see what User A is doing on the screen at the same time and maybe take over the screen to put his input in. I know that you cannot have 2 RDP connections at the same time but what would be the easiest solution to this. I want User A to keep his RDP connection, but I am unsure of what to suggest so that User B can see what is going on at the same time. The Users are not happy to use Real VNC, etc.

  Read the article

• Cannot mount Android phone and sync with Banshee

  - by Brett Alton

  I can't get my LG Optimus One to sync with Banshee. I read somewhere that the root needs to have an empty file called '.is_audio_player'. I did that and it still doesn't mount. I ran dmesg however and it appears that the card is unmounting before I even have a change to run Banshee. [ 7250.321359] usb 1-1.4: new high speed USB device using ehci_hcd and address 10 [ 7250.444795] scsi12 : usb-storage 1-1.4:1.0 [ 7251.567946] scsi 12:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 7251.568839] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 7252.232433] sd 12:0:0:0: [sdc] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) [ 7252.233299] sd 12:0:0:0: [sdc] Write Protect is off [ 7252.233306] sd 12:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 7252.233309] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.235658] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.235666] sdc: sdc1 [ 7252.239132] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.239140] sd 12:0:0:0: [sdc] Attached SCSI removable disk [ 7272.573437] usb 1-1.4: USB disconnect, address 10 Suggestions?

  Read the article

• Ubuntu 12.04 does not suspend with proprietary driver for Radeon 6800

  - by Mike

  I'm running Ubuntu 12.04 x86_64 (though these issues have existed in previous releases too) and have a Radeon 6800 graphics card. I've run into issues with the open-source driver (the system would randomly hang when shutting down) so I switched to the proprietary driver (I compiled it myself using these instructions), but I am having new problems now. The main issue is that when I go into sleep mode, about 50-75% of the time, the screen goes black but the monitor does not actually shut off, and I can hear that the fans/hard drive are not suspending either. I can't get the computer to wake up (Ctrl+Alt+F1,2,3,etc. does not work), and I always end up force shutting down with the power button. I'd really appreciate help! Here is some information that might be helpful: $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 4.2.11631 Compatibility Profile Context $ dmesg | grep fglrx [...] [ 6.718606] [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors [...]

  Read the article

• Installing Ubuntu 12.04 on a single GPT SSD which contains Windows 7

  - by Gary

  I recently bought a brand new 64 bit PC with a (ASUS) motherboard that supports UEFI and a GPT formatted 240Gb SSD, which contains Windows 7 in the first of 3 (80Gb) partitions. When the system arrived, it booted into Windows 7 like a dream, with no problems. I did not originally want Windows, but the manufacturer does not work with Linux (of any flavour), so I thought I would install Ubuntu into the second partition and dual boot. I downloaded the 12.04 64bit version and proceeded to install. Having selected to 'install', the screen became corrupted, with multicoloured garbage across the middle third of the screen !! So, I rebooted and --- MISSING OPERATING SYSTEM !!! The only way I can now get into Windows is via Super Grub2. First question - what went wrong ? 2nd - Will Ubuntu install on a GPT disk partition ? 3rd - Will it install alongside Windows 7 without screwing the boot mechanism ? 4th - How do I do it ? I have scoured the internet looking for appropriate answers and found NONE ! Please help.......

  Read the article

• Does a portable secondary laptop LCD monitor exist?

  - by Dougnukem

  I'm looking to buy a portable secondary LCD monitor for my Macbook Pro, does anything like that exist? I found some laptops that provide a dual 15'' monitor solution (but it's already baked into the hardware). Also some ideas posted about creating this type of setup back in 2007. I'm looking for something that is as thin as a laptop LCD (with maybe a bulky power supply that I could easily daisy chain or plug into a power strip along with my laptop). How difficult would it be to buy a 17'' laptop screen and hook up a DVI connector and power supply, and build a simple monitor stand for it? I've gotten to used to a dual-monitor setup at work and at home with my laptop that having to use my laptop in single-screen mode makes me feel crippled.

  Read the article

• Handling window resize with arbitrary aspect ratios

  - by DormoTheNord

  I'm currently making a 2D game using SFML. I want the aspect ratio to be maintained when the user resizes the window. I also want the game to work with any arbitrary aspect ratio (like any media player would). Here is the code I have so far: void os::GameEngine::setCameraViewport() { sf::FloatRect tempViewport; float viewAspectRatio = (float)aspectRatio.x / aspectRatio.y; float screenAspectRatio = (float)gameWindow.getSize().x / gameWindow.getSize().y; if (viewAspectRatio > screenAspectRatio) { // Viewport is wider than screen, fit on X } else if (viewAspectRatio < screenAspectRatio) { // Screen is wider than viewport, fit on Y } else // window aspect ratio matches view aspect ratio { tempViewport.height = 1; tempViewport.width = 1; tempViewport.left = 0; tempViewport.top = 0; } viewport = tempViewport; camera.setViewport(viewport); gameWindow.setView(camera); } The problem is I'm having trouble with the logic to determine the properties of the viewport.

  Read the article

• Wordpress Blank White Page for Login

  - by HollerTrain

  When I go to the /wp-login.php portion of my Wordpress site I get a blank white screen. In fact, throughout the entire domain I get blank white screen. Also, I can't even connect to the server via FTP (tried with other FTP accts to make sure not FTP client). Is this an issue with the host or my WP? Not even sure how to fix it if it's on my end cuz I can't even login to FTP or to the Admin Dashboard! Any help = appreciated.

  Read the article

• Higher resolutions unavailable with 2.6.38-8 kernel

  - by time-wastrel

  After upgrading to Natty and the 2.6.38-8 kernel I could no longer obtain the 1920x1080 resolution available in Maverick with 2.6.35-22. In fact the boot occasionally hung. However, after selecting the remaining 2.6.35-22 kernel, the high resolution was available. I then made the mistake of completely reinstalling, but could never get the higher resolutions with 2.6.38-8, no matter what I did. e.g. trying the nvidia proprietary driver, creating an xorg.conf. Even from the command line using xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync xrandr --addmode DVI-I-1 1920x1080_60.00 xrandr --output DVI-I-1 --mode 1920x1080_60.00 all I would get would be a blank screen and the monitor reporting no input. (Low resolutions displayed fine with xrandr.) I could actually add the 1920x1080 to the already existing probe-reported resolutions in the pool of available resolutions, but choosing it would give the blank screen. In the end I installed the 2.6.35-22 kernel again. The high resolution is back. For a while there, staying up all night and trying many things, I thought that a new video board or monitor might be needed, but deep down, I knew that they were both OK. My question is - "Is this some bug involving the latest kernel, that will go away, or if this persists in future kernels, is there a way to make sure that I can keep my native resolution?"

  Read the article

• Oracle IRM Desktop update

  - by martin.abrahams

  Just in time for Christmas, we have made a fresh IRM Desktop build available with a number of valuable enhancements: Office 2010 support Adobe Reader X support Enhanced compatibility with SharePoint Ability to enable the Sealed Email for Lotus Notes integration during IRM Desktop installation The kit is currently available as a patch that you can access by logging in to My Oracle Support and looking for patch 9165540. The patch enables you to download a package containing all 27 language variants of the IRM Desktop. We will be making the kit available from OTN as soon as possible, at which time you will be able to pick a particular language if preferred.

  Read the article

• How to disable visual effects and compiz 100%

  - by oshirowanen

  UPDATE 1: The problem is not a monitor refresh rate flickering problem, as then the whole screen would be flickering. For me, only the application windows flicker in and out of view, then most of the time, when there do decide to show themselves, they only partly show themselves, like just top half, bottom half, left half, corner missing, window disappears when you try moving it or mouse over it even etc etc. I know it is a visual effect problem as I know my computer cannot handle visual effects and for some reason when the windows do appear partly, I can see the shadows behind the windows. Those shadows are part of the visual effects which are turned on by default for some reason. I get the same problem with 10.04, but can quickly turn off the visual effects by right clicking the desktop, selecting change background image, and in the visual effects tab, I can click on none, which stops all the visual problems. ORIGINAL QUESTION: I am having problems with 11.04 on my computer. For some reason it is enabling visual effects by default in the live cd when it should not be as my computer cannot support such effects. My computer cannot support Unity either, but it defaults to standard gnome with visual effects for some reason. It should be defaulting to standard gnome with no visual effects. THerefore, all I get is a very flickery live cd which makes it very difficult to see anything. So my question is, how do I disable the visual effects from the live cd? To put it simply, the live cd flickering is so bad, that I had to log back into my standard 10.04 install just to write this question, as I just couldn't see enough of the screen because of the flickering in 11.04 to even get to askubuntu.com...

  Read the article

• Broke Ubuntu 12.04 either with Screencloud or Ubuntu Tweak

  - by pgrytdal

  Earlier today I installed the Screen Shot app "Screencloud" and after the installation Firefox was having problems. I didn't think much about it, just closed Firefox, then proceeded to change the toolbar opacity on Ubuntu Tweak. After restarting my system, hoping it would fix Firefox (because, you know, restarting fixes everything ;) ) I am able to go to the Log In Screen, type in my password, but then I get 3 errors regarding the Screencloud Ubuntu One, Imgur, and Dropbox plugins. After clicking the "Okay" on all three errors, all I see is my wallpaper. I am not able to access the terminal VIA CtrlAltT, but I am able to log out VIA CtrlAltDelete. I have tried all desktop environments I have installed (that, except for Unity 2D, has to do with Cairo Dock.) I hope I have provided enough information. If you need more, please ask. Please help! I would like to not have to re-install Ubuntu. Other info: OS: Ubuntu 12.04 I also have a Ubuntu 12.10 Live USB, but Ubuntu 12.10 hasn't run very well on any of my computers.

  Read the article

• Problems with Ubuntu and AMD A10-4655M APU

  - by Robert Hanks

  I have a new HP Sleekbook 6z with AMD A10-4655M APU. I tried installing Ubuntu with wubi--the first attempt ended up with a 'AMD unsupported hardware' watermark that I wasn't able to remove (the appeared when I tried to update the drivers as Ubuntu suggested) On the second attempted install Ubuntu installed (I stayed away from the suggested drivers) but the performance was extremely poor----as in Windows Vista poor. I am not sure what the solution is--if I need to wait until there is a kernel update with Ubuntu or if there are other solutions--I realise this is a new APU for the market. I would love to have Ubuntu 12.04 up and running--Windows 7 does very well with this new processor so Ubuntu should, well, be lightening speed. The trial on the Sleekbook with Ubuntu 12.10 Alpha 2 release was a complete failure. I created a bootable USB. By using either the 'Try Ubuntu' or 'Install Ubuntu' options resulted in the usual purple Ubuntu splash screen, followed by nothing...as in a black screen without any hint of life. Interestingly one can hear the Ubuntu intro sound. In case you are wondering, this same USB was trialed subsequently on another computer with and Intel Atom Processor. Worked flawlessly. Lastly the second trial on the Sleekbook resulted in the same results as the first paragraph. Perhaps 12.10 Beta will overcome this issue, or the finalised 12.10 release in October. I don't have the expertise to know what the cause of the behaviour is-the issue could be something else entirely. Sadly, the Windows 7 performance is very good with this processor-very similar and in some instances better to the 2nd generation Intel i5 based computer I use at my workplace. Whatever the cause is for the performance with Ubuntu 12.04 or 12.10 Alpha 2, the situation doesn't bode well for Ubuntu. Ubuntu aside, the HP Sleekbook is a good performer for the price. I am certain once the Ubuntu issue is worked on and solutions arise, the Ubuntu performance will probably be better than ever.

  Read the article

• Enchanted Swing in the Forest Wallpaper

  - by Asian Angel

  Magic [DesktopNexus] Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Never Call Me at Work [Humorous Star Wars Video] Add an Image Properties Listing to the Context Menu in Chrome and Iron Add an Easy to View Notification Badge to Tabs in Firefox SpellBook Parks Bookmarklets in Chrome’s Context Menu Drag2Up Brings Multi-Source Drag and Drop Uploading to Firefox Enchanted Swing in the Forest Wallpaper

  Read the article

• How to get a Toshiba L505 to boot USB or CD

  - by ShroudedCloud

  OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >