Search Results

Search found 14773 results on 591 pages for 'smart flash cache'.

Page 269/591 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

  • Windows XP installation problems

    - by Samurai Waffle
    I recently asked a question on here, and thought I had it working... Here is a link to it. Windows XP Installation problems So basically I'm having trouble getting XP installed. To sum it up, a computer I have had a boot sector virus, and I used Darik's Nuke and Boot to wipe the hard drive clean. So the hard drive has nothing on it. I had to try and install Windows through a DOS prompt, because for some reason it won't read it off the DVD. The UBCD is able to look at the files located on the DVD I have in, but I can't boot from it for some reason. So I extracted it to a USB drive, booted to DOS and started the setup process. Here's the weird thing with DOS... It can only find the C: drive. The C: drive in DOS is the flash drive that I have in, running DOS. I can't find the hard drive anywhere! So anyways, after starting the setup process, it copied the files over to the "hard drive" (which took 16 hours because the version of DOS I ran couldn't run smartdrv.exe), and it said the computer had to reboot. So I let it reboot, and it stopped and said there is no boot device. So I popped in UBCD that I have installed on a flash drive, and I discovered that it had copied the Windows files over to the flash drive and not the hard drive. It never asked where it should extract the files... So I toyed around with UBCD, ran a memory test on the hard drive to make sure it was fine, and it came out clean. So I'm stuck now. How can I get this installed? Writing this, I came up with an idea. If I copy the DOS startup files over to the hard drive, would I be able to start DOS from it? If so, I believe that could fix my problems. Any help is greatly appreciated, because I am running out of ideas and am at my wits end with this computer.

    Read the article

  • C String literals: Where do they go?

    - by Chris Cooper
    I have read a lot of posts about "string literals" on SO, most of which have been about best-practices, or where the literal is NOT located in memory. I am interested in where the string DOES get allocated/stored, etc. I did find one intriguing answer here, saying: Defining a string inline actually embeds the data in the program itself and cannot be changed (some compilers allow this by a smart trick, don't bother). but, it had to do with C++, not to mention that it says not to bother. I am bothering. =D So my question is, again, where and how is my string literal kept? Why should I not try to alter it? Does the implementation vary by platform? Does anyone care to elaborate on the "smart trick?" Thanks for any explanations.

    Read the article

  • FreeBSD high load loopback interface

    - by user1740915
    I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

    Read the article

  • What is the best nginx compression gzip level?

    - by Chamnap
    I'm using nginx reverse proxy cache with gzip enabled. However, I got some problems from android applications http requests to my rails json web service. It seems when I turn off reverse proxy cache, it works ok because the response header comes without gzip. Therefore, I think the problem caused from gzip. What is the most appropriate level of gzip compression? gzip on; gzip_http_version 1.0; gzip_vary on; gzip_comp_level 6; gzip_proxied any; gzip_types text/plain text/css text/javascript application/javascript application/json application/x-javascript text/xml application/xml application/xml+rss;

    Read the article

  • How effective are technical test(s) and is it necessary?

    - by The Elite Gentleman
    Hi everyone, I recently took a Java technical test (for a company who wanted are looking for senior java developers) and, funny enough, I only realised the technical terms of what I've been doing all along after I've written the test. I'm not too IT jargon when it comes to development but I can pretty much code and create solutions unaware that I'm using design pattern (or the specifics of that design pattern) or technology. I learned things such as JMS, Frameworks, etc. while programming at home and having to google stuff online to problems I have. Others e.g. IoC, Surrogates in Databases, etc., I have used extensively without knowing that it had a name for it. Do you think that these technical test are effective and why? What interesting questions did you find that boggled your brains out while the clock kept ticking? Seeing that IT is vastly evolving at a rapid rate, do we have to constantly be updated with new terms that comes out? Some questions I was asked : What object oriented principle is violated by this architectural mechanism for dot notation? Is indexing tables effective for range query or point query search? What is ThreadLocal and what is it used for? Method overloading vs Method overriding. What is the difference between the 2? What is dynamic binding? Now, imagine my poor head trying to understand these jargons (considering I use it almost everyday) PS The question was not a programming question, where you have a problem and write code to solve it. Rather, a thinking type question and you write answers (against the clock). Update I clearly didn't come out clearly as I should have. There are those that are technically "book smart" but with very little hands-on experience and vice versa. So, the question (in connection to what I've asked) is that are these technical test seeking "book smart" people or people with lots of hands-on experience (some who are not that well clued up with too much book-smart jargons). How effective is it then, for companies to look for developers if most of the questions are too terminology-centric? (if that's the correct term, :))

    Read the article

  • Weird graphical artefacts on OS X Snow Leopard.

    - by Debilski
    Since a couple of days I experience some strange graphical artefacts on Snow Leopard. Usually after a certain uptime, the background image would show some strange colours at some place. This could be reverted by reloading the background image. But the problem would appear again after rebooting (and waiting for an indefinite time). Sometimes, the shadow of windows would also have some artefacts; and this time the application switcher is completely distorted. Any ideas where I need to search for a solution of the problem? Edit: Model: MacBook Gen. 3.1 / all updates installed Update: After not having used Safari for a while, the problem has not occurred anymore (at least not after 20 days of uptime). Could well be that the problem had its origin in Safari or a Safari-related plugin. (Possibly Flash or Click-to-Flash as it did not happen with both deactivated, though the running time with this configuration might have been to short to be of any validity.)

    Read the article

  • NVRAM for journals on Linux?

    - by symcbean
    I've been thinking about ways of speeding up disk I/O, and one of the bottlenecks I keep coming back to is the journal. There's an obvious benefit to using an SSD for the journal - over and above just write caching unless of course I just disable the journal with the write cache (after all devicemapper doesn't seem to support barriers). In order to get the benefits from using a BB write cache on the controller, then I'd need to disable journalling - but then the OS should try to fsck the system after an outage. Of course if the OS knows what's in the batter-backed memory then it could use it as the journal - but that means it must be exposed as a block device and only be under the control of the operating system. However I've not been able to find a suitable low-cost device (no, write-levelling for Flash is not adequate for a journal, at least one which uses Smartmedia). While there's no end of flash devices, disk/array controllers with BB write caches, so far I've not found anything which just gives me non-volatile memory addressable as a block storage device.

    Read the article

  • Custom firmware for Asus WL-520g

    - by Jaroslav Záruba
    What custom firmware works with Asus WL-520g? (Note this is not 520gU, 520gC, etc.) I failed to flash it with Tomato (Tomato_1_28_ND.zip) - the admin UI does not accept the file, and when trying to tftp the file as adviced for 520gU all I get is this: Transfering file tomato-ND.trx to server in octet mode... Error occurred during the file transfer (Error code = 0): Error in SendPacket() call. I just saved the router form rather unsuccessful flash to DD-WRT (after few hours the router fell into coma), and I'd like to keep it as a backup should the new one die or whatever. (Unfortunately the stock firmware does not support WOL.)

    Read the article

  • Windows Home Server backup recovery missing driver for USB Device

    - by Pat James
    I'm doing a backup recovery of a Windows 7 PC from the backup on Windows Home Server. I've done this before and am accustomed to the prompt to load drivers for devices such as the NIC from a USB flash drive, which I have all loaded up with the drivers from the special folder in the WHS backup repository for this PC. My problem on this PC is that one of the drivers the recovery CD complains is missing is "USB Device", and it fails to find the drivers when I click the button to scan for and install drivers. So it seems it can't access the USB flash drive to load the other drivers. Any suggestions? I think my next step is to pull a DVD drive from another system and plug it in with a CD burned with the device drivers.

    Read the article

  • Why so Long time span in creating Session Factory?

    - by vijay.shad
    Hi My project is web application running in the tomcat container. This application is a spring framework based hibernate application. The problem with this is it takes a lot of time when creates session factory. here is the logs 2010-04-15 23:05:28,053 DEBUG [SessionFactoryImpl] Session factory constructed with filter configurations : {} 2010-04-15 23:05:28,053 DEBUG [SessionFactoryImpl] instantiating session factory with properties: {java.vendor=Sun Microsystems Inc., sun.java.launcher=SUN_STANDARD, catalina.base=/usr/local/InstalledPrograms/apache-tomcat-6.0.20, sun.management.compiler=HotSpot Tiered Compilers, catalina.useNaming=true, os.name=Linux, sun.boot.class.path=/usr/java/jdk1.6.0_17/jre/lib/resources.jar:/usr/java/jdk1.6.0_17/jre/lib/rt.jar:/usr/java/jdk1.6.0_17/jre/lib/sunrsasign.jar:/usr/java/jdk1.6.0_17/jre/lib/jsse.jar:/usr/java/jdk1.6.0_17/jre/lib/jce.jar:/usr/java/jdk1.6.0_17/jre/lib/charsets.jar:/usr/java/jdk1.6.0_17/jre/classes, java.util.logging.config.file=/usr/local/InstalledPrograms/apache-tomcat-6.0.20/conf/logging.properties, java.vm.specification.vendor=Sun Microsystems Inc., hibernate.generate_statistics=true, java.runtime.version=1.6.0_17-b04, hibernate.cache.provider_class=org.hibernate.cache.EhCacheProvider, user.name=root, shared.loader=, tomcat.util.buf.StringCache.byte.enabled=true, hibernate.connection.release_mode=auto, user.language=en, java.naming.factory.initial=org.apache.naming.java.javaURLContextFactory, sun.boot.library.path=/usr/java/jdk1.6.0_17/jre/lib/i386, java.version=1.6.0_17, java.util.logging.manager=org.apache.juli.ClassLoaderLogManager, user.timezone=Canada/Pacific, sun.arch.data.model=32, java.endorsed.dirs=/usr/local/InstalledPrograms/apache-tomcat-6.0.20/endorsed, sun.cpu.isalist=, sun.jnu.encoding=UTF-8, file.encoding.pkg=sun.io, package.access=sun.,org.apache.catalina.,org.apache.coyote.,org.apache.tomcat.,org.apache.jasper.,sun.beans., file.separator=/, java.specification.name=Java Platform API Specification, java.class.version=50.0, user.country=US, java.home=/usr/java/jdk1.6.0_17/jre, java.vm.info=mixed mode, os.version=2.6.18-128.el5, path.separator=:, java.vm.version=14.3-b01, hibernate.jdbc.batch_size=25, java.awt.printerjob=sun.print.PSPrinterJob, sun.io.unicode.encoding=UnicodeLittle, package.definition=sun.,java.,org.apache.catalina.,org.apache.coyote.,org.apache.tomcat.,org.apache.jasper., java.naming.factory.url.pkgs=org.apache.naming, sun.rmi.dgc.client.gcInterval=3600000, user.home=/root, java.specification.vendor=Sun Microsystems Inc., java.library.path=/usr/java/jdk1.6.0_17/jre/lib/i386/server:/usr/java/jdk1.6.0_17/jre/lib/i386:/usr/java/jdk1.6.0_17/jre/../lib/i386:/usr/java/packages/lib/i386:/lib:/usr/lib, java.vendor.url=http://java.sun.com/, java.vm.vendor=Sun Microsystems Inc., hibernate.dialect=org.hibernate.dialect.MySQL5InnoDBDialect, sun.rmi.dgc.server.gcInterval=3600000, common.loader=${catalina.home}/lib,${catalina.home}/lib/*.jar, java.runtime.name=Java(TM) SE Runtime Environment, java.class.path=:/usr/local/InstalledPrograms/apache-tomcat-6.0.20/bin/bootstrap.jar, hibernate.bytecode.use_reflection_optimizer=false, java.vm.specification.name=Java Virtual Machine Specification, java.vm.specification.version=1.0, catalina.home=/usr/local/InstalledPrograms/apache-tomcat-6.0.20, sun.cpu.endian=little, sun.os.patch.level=unknown, hibernate.cache.use_query_cache=true, hibernate.connection.provider_class=org.springframework.orm.hibernate3.LocalDataSourceConnectionProvider, java.io.tmpdir=/usr/local/InstalledPrograms/apache-tomcat-6.0.20/temp, java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi, server.loader=, os.arch=i386, java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment, java.ext.dirs=/usr/java/jdk1.6.0_17/jre/lib/ext:/usr/java/packages/lib/ext, user.dir=/, line.separator=, java.vm.name=Java HotSpot(TM) Server VM, hibernate.cache.use_second_level_cache=true, file.encoding=UTF-8, java.specification.version=1.6, hibernate.show_sql=true} 2010-04-15 23:08:53,516 DEBUG [AbstractEntityPersister] Static SQL for entity: com.vsd.model.Order There you can see the time delay of more than 3 mins in executing these processes. My database is mysql and database server is running on the local machine only. The container environment is Centos Linux system. I am clueless about why it takes that much of time in executing these process, But when i do the same task from under eclipse it does not take that much of time. Development environment is Windows.

    Read the article

  • Caching DNS server (bind9.2) CPU usage is so so so high.

    - by Gk
    Hi, I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

    Read the article

  • Executed PHP files are stale unitl "touched" (Symlinked NFS mount as web root)

    - by mmattax
    We have a PHP application that has 3 web servers (running Nginx and Apache). The web server's directory root are symlinked directories that point to an NFS mount. For example: web01 has an NFS mount at /data/webapp, which is symlinked to /home/webapp. Apache serves content from /home/webapp/www. We also use ACP for our PHP opcode cache. When we deploy code, we SCP an archive file to the NFS server and extract it. Since upgrading RedHat 6, when we deploy our code the webserver execute "stale" PHP files until touch is run on the PHP files. We thought that APC might be causing a problem, but the issue exists, even after clearing the opcode cache. Any ideas on how to diagnose why the stale PHP code is being executed?

    Read the article

  • Why many applications close after opening a document or doing a specific actions?

    - by Mohsen Farjami
    I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

    Read the article

  • In terms of performance, which processor is more suitable?

    - by Roberts
    My computer specs: Motherboard: Gigabyte GA-945PL-S3 OS: Microsoft Windows 7 Ultimate CPU Socket: LGA775 CPU: Intel® Core™2 Duo Processor E4300 (2M Cache, 1.80 GHz, 800 MHz FSB) After I bought new hard drive (Western Digital 250GB, 7200rpm, 32MB, Sata III, Caviar Blue, WD2500AAKX) I saw that my processor temperature started to raise to higher value then before. Now while surfing internet it goes to 70°C. Cleaned my motherboard - nothing; cleaned fan - nothing; replaced thermal paste - nothing; replaced thermal paste with care - still nothing. So I went to friend just to check if he doesn't have any spear fan, and he did. But with fan he had another processor that he didn't need and he wanted to give it to me, but I told him that I will think about this. So my CPU, he's CPU (Intel® Pentium® D Processor 820 (2M Cache, 2.80 GHz, 800 MHz FSB)). Question: which proccesor is better for gaming and for recording games?

    Read the article

  • Apache/2.2.20 (Ubuntu 11.10) gzip compression won't work on php pages, content is chunked

    - by FamousInteractive
    I'm running into a problem with a new production server whereto I'm transferring projects. The HTML output of the PHP applications isn't compressed by the Apache mod_deflate module. Other resources, as stylesheet and javascript files, even html pages, which are served with the same Content-type (text/html) as the PHP output, are compressed! The projects use the following rules (from HTML5 boilerplate) in the .htaccess: <IfModule mod_deflate.c> # Force deflate for mangled headers developer.yahoo.com/blogs/ydn/posts/2010/12/pushing-beyond-gzipping/ <IfModule mod_setenvif.c> <IfModule mod_headers.c> SetEnvIfNoCase ^(Accept-EncodXng|X-cept-Encoding|X{15}|~{15}|-{15})$ ^((gzip|deflate)\s*,?\s*)+|[X~-]{4,13}$ HAVE_Accept-Encoding RequestHeader append Accept-Encoding "gzip,deflate" env=HAVE_Accept-Encoding </IfModule> </IfModule> # HTML, TXT, CSS, JavaScript, JSON, XML, HTC: <IfModule filter_module> FilterDeclare COMPRESS FilterProvider COMPRESS DEFLATE resp=Content-Type $text/html FilterProvider COMPRESS DEFLATE resp=Content-Type $text/css FilterProvider COMPRESS DEFLATE resp=Content-Type $text/plain FilterProvider COMPRESS DEFLATE resp=Content-Type $text/xml FilterProvider COMPRESS DEFLATE resp=Content-Type $text/x-component FilterProvider COMPRESS DEFLATE resp=Content-Type $application/javascript FilterProvider COMPRESS DEFLATE resp=Content-Type $application/json FilterProvider COMPRESS DEFLATE resp=Content-Type $application/xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/xhtml+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/rss+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/atom+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/vnd.ms-fontobject FilterProvider COMPRESS DEFLATE resp=Content-Type $image/svg+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $image/x-icon FilterProvider COMPRESS DEFLATE resp=Content-Type $application/x-font-ttf FilterProvider COMPRESS DEFLATE resp=Content-Type $font/opentype FilterChain COMPRESS FilterProtocol COMPRESS DEFLATE change=yes;byteranges=no </IfModule> </IfModule> We have a testing machine that runs the same Apache, OS and PHP version. On that machine the compression works just fine on the PHP output. I've checked and compared Apache and PHP config files, all the same as far as I can tell. I've tried several manners of outputting the content of the PHP, using output buffering or just plain echoing the content. Same thing, no compression. Example response headers of a PHP output: HTTP/1.1 200 OK Date: Wed, 25 Apr 2012 23:30:59 GMT Server: Apache Accept-Ranges: bytes Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: public Pragma: no-cache Vary: User-Agent Keep-Alive: timeout=5, max=98 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=utf-8 Example of response headers on a css file: HTTP/1.1 200 OK Date: Wed, 25 Apr 2012 23:30:59 GMT Server: Apache Last-Modified: Mon, 04 Jul 2011 19:12:36 GMT Vary: Accept-Encoding,User-Agent Content-Encoding: gzip Cache-Control: public Expires: Fri, 25 May 2012 23:30:59 GMT Content-Length: 714 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/css; charset=utf-8 Does anyone has a clue or experienced the same "problem"? thanks!

    Read the article

  • administraitor denies command prompt

    - by roxas383
    I looked at the command prompt faqs on this webiste and tried to get me to make a new profile but when i went to open it it said "The command prompt has been disabled by your administraitor-click any key to countinue" and when i do it closes which i knew that was going to happen. Is there someway i can stop the admin from blocking my command prompt? oh and i was at school too (Dont know if this helps but i am in the West Allis West Milwaukee school district). Also, is there a way i can hack into the blocking program for my school at all? I don't remember what the program is but it might have to do with vision? I'm not sure but it would be greatly appreciated if someone could help (could i download a program on a flash drive that denies any blocking and/or disabling SafeSearch and plug it in into a computer at my school and use it from the flash drive? Would the school blocking thingy deny it from working?) HELP ME PLEASE!!!!!!!!!

    Read the article

  • Opinions Required: Custom HTML Markup from PHP with or without tag prefix.

    - by buggedcom
    I've created a class in PHP that allows you to create custom HTML markup. It basically works a bit like FB Markup or EE tags. It works off a tag prefix, so you can add tags like this. <ctag:pagination per_page="20" total="500" page="0" base="http://localhost/page?page={page}" mode="smart" adjecents="5" /> My question is: Is the markup above better than the markup below? I'm asking as I'm considering branching my code to rework the tag matching so you can just generate custom html elements. It would well for a drop in HTML5 replacement service. Match the User Agent for a none HTML5 browser and replace the HTML5 elements with your own replacements. <pagination per_page="20" total="500" page="0" base="http://localhost/page?page={page}" mode="smart" adjecents="5" /> PS, if anybody wants to look at the class I've put a download here.

    Read the article

  • Why does the java -Xmx not working?

    - by Zenofo
    In my Ubuntu 11.10 VPS, Before I run the jar file: # free -m total used free shared buffers cached Mem: 256 5 250 0 0 0 -/+ buffers/cache: 5 250 Swap: 0 0 0 Run a jar file that limited to maximum of 32M memory: java -Xms8m -Xmx32m -jar ./my.jar Now the memory state as follows: # free -m total used free shared buffers cached Mem: 256 155 100 0 0 0 -/+ buffers/cache: 155 100 Swap: 0 0 0 This jar occupied 150M memory. And I can't run any other java command: # java -version Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. # java -Xmx8m -version Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. I want to know why the -Xmx parameter does not take effect? How can I limit the jar file using the memory?

    Read the article

  • There's some html content in a file which is downloaded using PHP scripts on firefox

    - by chqiu
    I use the following to download a file with PHP: ob_start(); $browser = id_browser(); header('Content-Type: '.(($browser=='IE' || $browser=='OPERA')? 'application/octetstream':'application/octet-stream')); header('Expires: '.gmdate('D, d M Y H:i:s').' GMT'); header('Content-Transfer-Encoding: binary'); header('Content-Length: '.filesize(realpath($fullpath))); //header("Content-Encoding: none"); if($browser == 'IE') { header('Content-Disposition: attachment; filename="'.$file.'"'); header('Cache-Control: must-revalidate, post-check=0, pre-check=0'); header('Pragma: public'); } else { header('Content-Disposition: attachment; filename="'.$file.'"'); header('Cache-Control: no-cache, must-revalidate'); header('Pragma: no-cache'); } //@set_time_limit( 0 ); ReadFileChunked(utf8_decode($fullpath)); ob_end_flush(); The source code of ReadFileChunked is: function ReadFileChunked($filename,$retbytes=true) { $chunksize = 1*(1024*1024); $remainFileSize = filesize($filename); if($remainFileSize < $chunksize) $chunksize = $remainFileSize; $buffer = ''; $cnt =0; // $handle = fopen($filename, 'rb'); //echo $filename."<br>"; $handle = fopen($filename, 'rb'); if ($handle === false) { //echo 1; return false; } //echo 2; while (!feof($handle)) { //echo "current remain file size $remainFileSize<br>"; //echo "current chunksize $chunksize<br>"; $buffer = fread($handle, $chunksize); echo $buffer; sleep(1); ob_flush(); flush(); if ($retbytes) { $cnt += strlen($buffer); } $remainFileSize -= $chunksize; if($remainFileSize == 0) break; if($remainFileSize < $chunksize) { $chunksize = $remainFileSize; } } $status = fclose($handle); if ($retbytes && $status) { return $cnt; // return num. bytes delivered like readfile() does. } return $status; } The question is : The file downloaded will contiain some html tags which are the content of the html code generated by the php. The error will happened when downloading the txt file with the file size smaller than 4096 bytes. Please help me to slove this problem , thank you very much! Chu

    Read the article

  • install grub on pendrive containing linux installation, making it system independent

    - by arpit
    i have a win7 system and i want to install debian 6 on usb flash drive. the problem is grub loader. i want to install the grub loader on usb itself, so i can just plug in the pendrive in any computer and boot to deb6. so in effect making the flash drive an independent system. i tried it earlier, but ended up with grub loader needing me to insert the pendrive every time to give me boot options to even boot the win7 system, even though it was on primary hdd. so is there a way to turn the pendrive into full linux system with own boot loader, which can automatically detect os in the system i plug it in and be able to boot any of them. totally, self sufficient and system independent; making the pen drive so that it only needs a host system to run the os it carries. thank you, waiting for replies.

    Read the article

  • WSUS is not using Akamai CDN for syncronisation source

    - by Geekman
    I've just installed a WSUS onto our network, and I'm currently doing the initial sync. I've found that WSUS does not seem to be talking to an Akamai cache, but rather with MS directly. This is contrary to what I've always thought regarding Windows Update traffic. Tcpdump of our WSUS server doing initial sync... As you can see it's speaking with 65.55.194.221. For me to speak to this IP, I have to go over international transit links. Which is of course not ideal. 8:42:31.279757 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4379374:4380834, ack 289611, win 256, length 1460 18:42:31.279759 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4380834:4382294, ack 289611, win 256, length 1460 18:42:31.279762 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [.], seq 4382294:4383754, ack 289611, win 256, length 1460 18:42:31.279764 IP 65.55.194.221.https > XXXX.XXXX.XXXX.XXXX.50888: Flags [P.], seq 4383754:4384144, ack 289611, win 256, length 390 18:42:31.279793 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4369154, win 23884, length 0 18:42:31.279888 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4377914, win 23884, length 0 18:42:31.280015 IP XXXX.XXXX.XXXX.XXXX.50888 > 65.55.194.221.https: Flags [.], ack 4384144, win 23884, length 0 And yet, if I ping download.windowsupdate.com it seems to resolve to a local (national) Akamai node, just fine: root@some-node:~# ping download.windowsupdate.com PING a26.ms.akamai.net (210.9.88.48) 56(84) bytes of data. 64 bytes from a210-9-88-48.deploy.akamaitechnologies.com (210.9.88.48): icmp_req=1 ttl=59 time=1.02 ms 64 bytes from a210-9-88-48.deploy.akamaitechnologies.com (210.9.88.48): icmp_req=2 ttl=59 time=1.10 ms Why is this? And how can I change that (if possible)? I know that I can manually specify a WSUS source to sync with instead of pick the default MS Update like I currently have... But it seems like I shouldn't have to do this. NOTE: I've haven't confirmed if a WUA speaks with Akamai, just looking at WSUS as all WUAs will use our internal WSUS from now on. We'll be looking to join an IX shortly with the hopes of peering with an Akamai cache and have very fast access to Windows Updates. Before I let this drive my motivations for an IX at all I want to first confirm it's actually possible for WSUS to speak with an Akamai cache. I know this is somewhat networking related, but I feel like it has more to do with WSUS than anything, so someone who knows WSUS better than me will likely be able to figure this out.

    Read the article

  • How to delete folder of owner/group 99 99

    - by Aakash Chakravarthy
    I am using wordpress with wp-super-cache plugin. This plugin automatically created a cache folder in my site for storing the cached files. But unusually it created folder with owner/group 99 99. It was created automatically. Due to this, i am not able to delete that folder or change the CHMOD of that folder. This really a headache. I searched google, but none gave me a good answer. Please help me delete or change the CHMOD of that folder ? I am on Linux server.

    Read the article

  • Drupal on an NFS share has terrible performance

    - by Marcus
    We have a setup where a Drupal 7 site with the following setup - a VMware ESXi 4.1 host server running a web vm and an NFS VM. The web VM is using Apache and mod_php. The site is still in development thus we have to turn off all forms of caching due to the frequently-updated files. Each page request takes around 15-20 seconds to complete. Profiling the PHP code shows that the vast majority of time (normally over 90%) is taking by all the is_dir(), is_file() function calls that load up the modules. I've increased PHP's realpath cache size to several megs and an strace shows that the lstat calls then drop from over 200 to around 6 and stat() decreases a bit (around 600 calls). However, while this has shaved off quite a bit of time, I am simply unable to break past the 10 second per request barrier. Is there a way to get better performance out of this setup that doesn't involve caching? Configs and stats: VMs: web - Centos 6 64bt, 2.5GB RAM, normal CPU/HD prioritisation nfs - Centos 6 64bt, 2GB RAM, normal CPU priority, high HD priority PHP: 32M realpath cache size (it's this high for testing purposes) NFS: ~]# egrep -v '#|^$' /etc/nfsmount.conf [ NFSMount_Global_Options ] Defaultvers=4 Ac=False Rsize=32k Wsize=32k Bsize=32k Reading speeds via NFS are not an issue a dd of a 100M test file using 32k blocks returns: 3200+0 records in 3200+0 records out 104857600 bytes (105 MB) copied, 1.84984 s, 56.7 MB/s real 0m1.857s user 0m0.007s sys 0m0.330s Strace on Apache process with empty realpath cache: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 50.78 1.157452 337 3434 28 stat 32.58 0.742656 628 1182 425 open 9.29 0.211788 762 278 1 lstat 3.17 0.072322 0 237865 write 2.45 0.055839 490 114 13 access 0.45 0.010262 43 237 brk 0.34 0.007725 10 811 74 read 0.28 0.006340 9 679 fstat 0.22 0.005069 18 281 poll 0.20 0.004533 6 698 getdents 0.09 0.001960 10 190 mmap 0.05 0.001065 14 74 accept4 0.04 0.001000 333 3 chdir 0.03 0.000750 4 190 munmap 0.01 0.000339 0 836 close 0.01 0.000247 3 75 writev 0.00 0.000068 0 611 fcntl 0.00 0.000063 1 77 shutdown 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 5 socket 0.00 0.000000 0 5 5 connect 0.00 0.000000 0 74 getsockname 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 1 futex ------ ----------- ----------- --------- --------- ---------------- Strace after realpaths are cached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.14 1.371006 484 2831 28 stat 31.79 0.724705 627 1155 425 open 3.53 0.080354 0 237865 write 2.65 0.060433 530 114 13 access 0.43 0.009913 99 100 brk 0.38 0.008730 11 804 74 read 0.35 0.007910 12 675 fstat 0.30 0.006775 10 654 getdents 0.13 0.003065 11 281 poll 0.09 0.002000 333 6 1 lstat 0.07 0.001545 2 807 close 0.05 0.001063 14 74 accept4 0.04 0.001000 6 179 mmap 0.02 0.000404 2 179 munmap 0.01 0.000271 4 75 writev 0.01 0.000212 0 611 fcntl 0.01 0.000129 2 77 shutdown 0.00 0.000022 0 74 getsockname 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 3 socket 0.00 0.000000 0 3 3 connect 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 3 chdir ------ ----------- ----------- --------- --------- ---------------- Mount: nfs.xxx.xxx.xxx:/path/to/website/files on /path/to/website/files type nfs (rw,hard,intr,noac,vers=4,addr=xx.xx.xx.xx,clientaddr=xx.xx.xx.xx) Any help is, naturally, appreciated.

    Read the article

  • xen domUs crashes or unavailability

    - by Rush
    I've xen server with 8 domU. Server is Xeon E31270 with 16gb ram. I think it is enough for 8 machines. Sometimes domU's crashes and i can't figure out the reason. After crash i can connect to console and there is somthing like this: Oct 8 22:20:49 server kernel: [30892.320780] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.320790] Node 0 DMA: 10*4kB 3*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8080kB Oct 8 22:20:49 server kernel: [30892.320817] Node 0 DMA32: 648*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5760kB Oct 8 22:20:49 server kernel: [30892.320842] 1491 total pagecache pages Oct 8 22:20:49 server kernel: [30892.320847] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.320852] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.320858] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.320862] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.324024] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.324024] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.324024] 424467 pages shared Oct 8 22:20:49 server kernel: [30892.324024] 503538 pages non-shared Oct 8 22:20:49 server kernel: [30892.330308] apache2 invoked oom-killer: gfp_mask=0x200da, order=0, oom_adj=0 Oct 8 22:20:49 server kernel: [30892.330322] apache2 cpuset=/ mems_allowed=0 Oct 8 22:20:49 server kernel: [30892.330330] Pid: 23938, comm: apache2 Not tainted 2.6.32-5-xen-amd64 #1 Oct 8 22:20:49 server kernel: [30892.330337] Call Trace: Oct 8 22:20:49 server kernel: [30892.330349] [<ffffffff810b7180>] ? oom_kill_process+0x7f/0x23f Oct 8 22:20:49 server kernel: [30892.330358] [<ffffffff810b76a4>] ? __out_of_memory+0x12a/0x141 Oct 8 22:20:49 server kernel: [30892.330367] [<ffffffff810b77fb>] ? out_of_memory+0x140/0x172 Oct 8 22:20:49 server kernel: [30892.330376] [<ffffffff810bb59c>] ? __alloc_pages_nodemask+0x4e5/0x5f5 Oct 8 22:20:49 server kernel: [30892.330385] [<ffffffff810cc224>] ? do_wp_page+0x386/0x707 Oct 8 22:20:49 server kernel: [30892.330395] [<ffffffff8100c3a5>] ? __raw_callee_save_xen_pud_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330404] [<ffffffff8100c369>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330412] [<ffffffff810cdfc7>] ? handle_mm_fault+0x7aa/0x80f Oct 8 22:20:49 server kernel: [30892.330422] [<ffffffff8130f906>] ? do_page_fault+0x2e0/0x2fc Oct 8 22:20:49 server kernel: [30892.330433] [<ffffffff8130d7a5>] ? page_fault+0x25/0x30 Oct 8 22:20:49 server kernel: [30892.330439] Mem-Info: Oct 8 22:20:49 server kernel: [30892.330443] Node 0 DMA per-cpu: Oct 8 22:20:49 server kernel: [30892.330450] CPU 0: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330463] CPU 1: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330466] Node 0 DMA32 per-cpu: Oct 8 22:20:49 server kernel: [30892.330469] CPU 0: hi: 186, btch: 31 usd: 0 Oct 8 22:20:49 server kernel: [30892.330472] CPU 1: hi: 186, btch: 31 usd: 60 Oct 8 22:20:49 server kernel: [30892.330476] active_anon:342076 inactive_anon:115398 isolated_anon:0 Oct 8 22:20:49 server kernel: [30892.330477] active_file:268 inactive_file:481 isolated_file:0 Oct 8 22:20:49 server kernel: [30892.330477] unevictable:1125 dirty:2 writeback:13 unstable:0 Oct 8 22:20:49 server kernel: [30892.330478] free:3410 slab_reclaimable:1718 slab_unreclaimable:6946 Oct 8 22:20:49 server kernel: [30892.330478] mapped:899 shmem:113 pagetables:35697 bounce:0 Oct 8 22:20:49 server kernel: [30892.330502] Node 0 DMA free:8036kB min:32kB low:40kB high:48kB active_anon:1144kB inactive_anon:1268kB active_file:8kB inactive_file:8kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:11792kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:224kB kernel_stack:16kB pagetables:1228kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330518] lowmem_reserve[]: 0 2004 2004 2004 Oct 8 22:20:49 server kernel: [30892.330523] Node 0 DMA32 free:5604kB min:5708kB low:7132kB high:8560kB active_anon:1367160kB inactive_anon:460324kB active_file:1064kB inactive_file:1916kB unevictable:4500kB isolated(anon):0kB isolated(file):0kB present:2052320kB mlocked:4500kB dirty:8kB writeback:52kB mapped:3600kB shmem:452kB slab_reclaimable:6872kB slab_unreclaimable:27560kB kernel_stack:3528kB pagetables:141560kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:992 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330539] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.330544] Node 0 DMA: 1*4kB 2*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8036kB Oct 8 22:20:49 server kernel: [30892.330579] Node 0 DMA32: 609*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5604kB Oct 8 22:20:49 server kernel: [30892.330605] 1522 total pagecache pages Oct 8 22:20:49 server kernel: [30892.330610] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.330615] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.330621] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.330625] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.333018] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.333018] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.333018] 424367 pages shared Oct 8 22:20:49 server kernel: [30892.333018] 503658 pages non-shared Seems like there isn't enough memory for this domU. But there is no any memory problems reported in munin monitoring: As you see system uses around 0.2G and 1G is available. So my question is: Is it xen specific problem, that real memory usage and memory usage that shows munin are different (I've never seen such problems oh real hardware machines)? Or maybe it is just monitoring problem, that can't catch moment when there is unusual high load and domU go down? And how I can to defeat this problem? it is really annoying to catch messages in e-mail that domU went down. Btw, such situation was when domU had 2G memory.

    Read the article

  • No free disk space ;[

    - by skomak
    Hi I have weird situation because Linux df command says that there is no free disk space [root@backup cache]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 72G 70G 0 100% / /dev/sda1 190M 11M 170M 7% /boot tmpfs 248M 0 248M 0% /dev/shm but du -sh /* says [root@backup cache]# du -sh /* 4.0K /bacula-restores 7.4M /bin 5.4M /boot 3.6T /data 116K /dev 55M /etc 204K /home 76M /lib 16K /lost+found 12K /media 0 /misc 16K /mnt 8.0K /mount 0 /net 8.0K /opt 0 /proc 2.3G /root 32M /sbin 8.0K /selinux 168K /share 8.0K /srv 0 /sys 361M /test 20K /tmp 3.2G /usr 1.5G /var Could you tell me where is a problem? Where is my space? I can't figure it out :(

    Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >