Search Results

Search found 7374 results on 295 pages for 'strange behaviour'.

Page 269/295 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• USB ports causing Wireless and Mobile Phone tethering drop out

  - by chrolli

  I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

  Read the article

• Snmpd update interface counters slowly or something like this

  - by Korjavin Ivan

  I update one my freebsd box to 9-stable (totally new installation) and install net-snmp for monitoring. uname -r 9.1-PRERELEASE pkg_info net-snmp-5.7.1_7 Information for net-snmp-5.7.1_7: Comment: An extendable SNMP implementation .... cat /var/db/ports/net-snmp/options # This file is auto-generated by 'make config'. # Options for net-snmp-5.7.1_7 _OPTIONS_READ=net-snmp-5.7.1_7 _FILE_COMPLETE_OPTIONS_LIST= IPV6 MFD_REWRITES PERL PERL_EMBEDDED PYTHON DUMMY TKMIB DMALLOC MYSQL AX_SOCKONLY UNPRIVILEGED OPTIONS_FILE_UNSET+=IPV6 OPTIONS_FILE_UNSET+=MFD_REWRITES OPTIONS_FILE_SET+=PERL OPTIONS_FILE_SET+=PERL_EMBEDDED OPTIONS_FILE_UNSET+=PYTHON OPTIONS_FILE_SET+=DUMMY OPTIONS_FILE_UNSET+=TKMIB OPTIONS_FILE_SET+=DMALLOC OPTIONS_FILE_UNSET+=MYSQL OPTIONS_FILE_UNSET+=AX_SOCKONLY OPTIONS_FILE_UNSET+=UNPRIVILEGED I have about 500 vlan on this machine, and collect info about interface through snmpd to 2 different software, zabbix and cacti. And both of them plot the graphs with blank fields. I tryed change polling time in zabbix, from 15, sec to 30,60,90,120,10. And anyway i have blank fields. snmpd.conf is empty - only a access controls. This configuration worked fine on freebsd 8. Where is my fault? How fix this graphs? UPD: Changing pooling time, switch off one of agent, doesnt help. I look at zabbix log (recieved data from snmpd) and see that: sorry for russian locale, just look at numbers: and thats is not true, as my "iftop" show speed was about 90Mbits, but snmpd return 2Mbits. I understand that snmpd doesnt return speed, it return just a counter. But how its possible? why 2Mbit/s ? I tryed recompile snmpd with 64-bit counters, and without it. In both variants this blank fields present. So i think its my OS (freebsd) doesnt update interface counters well. I still collect tcpdump for found this request/response. But have problem with that, to much trash. UPD2: I decrypt tcpdump-ed file, and public this as google doc at gdocfile Timediff looks strange.. Like zabbix sometimes "forget" do request, and then do twice at row, ehh UPD3: I parse log from command "while true; do netstat -bin -I vlan4008 /var/log/netstat; sleep 300; done" and load as google docs, and add formula for speed : link Looks like all counters in OS are good. Now i think problem in : 1. zabbix get request twice at row (and what about cacti) 2. snmpd use counter32

  Read the article

• Issue with Netgear GS108T Managed Switch and Jumbo Frames

  - by Richie086

  I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

  Read the article

• OpenVPN, Great on Windows, VERY slow on Mac...

  - by Phsion

  Hello, I'm not really an IT Pro, but this seemed like the best place to ask this question... I have setup VPN networks in the past, for fun, and everything was great, but now I've set one up for my boss, and while my computers all work great, his Mac machines are almost too slow to work with. Its pretty much vanilla configs all around, anyone have any ideas? Its a TUN routing setup over UDP. Back Story: My boss travels a lot, and wants to be able to access all his files from the road, and is also pretty paranoid about security (even though knows almost nothing about computers). SO i figured a VPN would be the answer. I went with OpenVPN, but there are some other issues. The only ISP we can get in our area besides Dial-UP is a crappy Satellite provider, that doesn't offer public IPs unless your willing to pay, so while the computers and VPN setup are pretty vanilla, the routing and structure is strange to get around this limitation. Specs: Its OpenVPN2, and there are six machines using it (only three actually use it, the rest are my test machines), one Windows 7 laptop, two XP Desktops, one OS X 10.5 Desktop, one 10.6 Desktop, and one 10.6 Laptop. One XP Desktop sits at my house and acts as the server (6Mbs/2Mbs FIOS connection). One XP desktop sits at the office and hosts a webpage that will wake up the Main Mac Desktop from sleep, and also ping all the machines on the VPN and show their status. The main office mac (10.6) stays in sleep mode until it gets the Wake-On-Lan packet from the Office XP, and then it auto connects to the VPN and opens itself up. The reason for all this is the Satellite private IP crap means i cant directly access the office machines outside of the LAN, so everyone connects to my house first, then they talk to each other from there. The Wake On Lan weirdness is because my boss doesn't want to leave the main Mac on all the time, and making a quick and dirty webpage was the easiest way to send a Magic Packet from inside the LAN without confusing my boss. The VPN uses Client Config files to make static IPs for the client. The only thing i found in google was some changes to the VPN MTU settings (down to 1400) but no real help. Oh, and i forgot...all the windows machines just have OpenVPN start as a service. The Mac laptop uses tunnelblick (an OpenVPN GUI) and the Mac Desktops use OpenVPN in normal command line mode. Server Config: tun-mtu 1500 fragment 1450 mssfix 1450 management localhost #### port #### proto udp dev tun ca ####### cert ####### key ###### dh ###### server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-config-dir ccd route 10.8.0.0 255.255.255.252 client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status log Client Configs (all are simple variations on this) tun-mtu 1500 fragment 1450 mssfix 1450 client dev tun proto udp remote ######## #### resolv-retry infinite nobind persist-key presist-tun ca ##### cert ##### key ##### ns-cert-type server comp-lzo verb 3

  Read the article

• iftop Shows Lots of Mysterious Connections - Not Showing in netstat

  - by HOLOGRAPHICpizza

  I've just stopped all pretty much all services except sshd on my server (Ubuntu Server 10.04), and when I run iftop I get output that looks like this: 12.5Kb 25.0Kb 37.5Kb 50.0Kb 62.5Kb mqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqq flash.gateway.2wire.net:ssh <=> 172.16.1.151:60405 1.75Kb 1.54Kb 2.22Kb flash.gateway.2wire.net:21095 <=> 69.127.29.20:32582 536b 107b 27b flash.gateway.2wire.net:21095 <=> 190.164.122.134:13557 0b 105b 26b flash.gateway.2wire.net:21095 <=> 79.165.212.195:45138 0b 105b 26b flash.gateway.2wire.net:21095 <=> 151.42.15.151:9031 0b 72b 18b flash.gateway.2wire.net:21095 <=> 88.185.120.179:51413 0b 0b 49b flash.gateway.2wire.net:21095 <=> 178.120.152.97:25924 0b 0b 29b flash.gateway.2wire.net:21095 <=> 109.110.217.77:27868 0b 0b 26b flash.gateway.2wire.net:21095 <=> 84.13.201.90:16509 0b 0b 26b flash.gateway.2wire.net:21095 <=> 171.7.125.224:11777 0b 0b 26b flash.gateway.2wire.net:21095 <=> 115.177.164.170:21360 0b 0b 26b flash.gateway.2wire.net:21095 <=> 50.88.126.18:25540 0b 0b 25b flash.gateway.2wire.net:21095 <=> 223.206.230.163:13431 0b 0b 25b flash.gateway.2wire.net:21095 <=> 78.144.187.26:24515 0b 0b 25b flash.gateway.2wire.net:21095 <=> 83.20.61.211:27572 0b 0b 25b flash.gateway.2wire.net:21095 <=> 82.134.151.42:18448 0b 0b 18b flash.gateway.2wire.net:21095 <=> 126.117.95.247:25316 0b 0b 18b flash.gateway.2wire.net:21095 <=> 116.202.65.230:9044 0b 0b 18b flash.gateway.2wire.net:21095 <=> 88.120.63.205:51413 0b 0b 17b qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cumm: 61.6KB peak: 8.00Kb rates: 1.59Kb 1.38Kb 2.04Kb RX: 18.4KB 1.64Kb 696b 549b 640b TOTAL: 80.0KB 9.64Kb 2.27Kb 1.92Kb 2.66Kb This is the first part (not the unix socket part) of the output of netstat -a: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:55677 *:* LISTEN tcp 0 0 flash.gateway.2wire:ssh 172.16.1.151:60405 ESTABLISHED tcp 0 48 flash.gateway.2wire:ssh 172.16.1.151:60661 ESTABLISHED tcp6 0 0 [::]:ssh [::]:* LISTEN udp 0 0 *:37790 *:* What could all those strange connections on port 21095 be? And why would they not show up in netstat?? Any advice would be greatly appreciated.

  Read the article

• Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

  - by Beres Botond

  I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Yahoo Webmail - Garbled Quote Text

  - by baultista

  I've encountered a very strange problem when trying to reply to e-mail via my Yahoo Web Mail from a family member's computer. She received an e-mail from a client who is using Microsoft Outlook. When I receive the message it looks perfectly fine in my browser and I can read it. However, when I try to reply to the e-mail the quoted text looks as such: > #yiv9181642880 p.yiv9181642880msonormal1114, #yiv9181642880 > li.yiv9181642880msonormal1114, #yiv9181642880 > div.yiv9181642880msonormal1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msoacetate1114, #yiv9181642880 > li.yiv9181642880msoacetate1114, #yiv9181642880 > div.yiv9181642880msoacetate1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880emailquote1114, #yiv9181642880 > li.yiv9181642880emailquote1114, #yiv9181642880 > div.yiv9181642880emailquote1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msochpdefault1114, > #yiv9181642880 li.yiv9181642880msochpdefault1114, > #yiv9181642880 div.yiv9181642880msochpdefault1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msonormal53, #yiv9181642880 > li.yiv9181642880msonormal53, #yiv9181642880 > div.yiv9181642880msonormal53 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} It's the strangest thing. It doesn't happen with all e-mails except this particular one. At a glance it almost looks like raw CSS code that's being displayed, but I really can't understand why. So far I have tried the following: Try a different browser, both IE11 and Google Chrome Check the browser encoding settings Check Yahoo Web Mail's encoding/font settings My only other guess is that the client used some weird font or formatting on the e-mail that is throwing the message body out of sync. Unfortunately for my family member, she is a contractor working with a medium-sized company that refuses to provide her with a domain e-mail address, so she is forced to conduct business this way. Simply asking the sender to use a more widely supported font wouldn't be an acceptable solution here. Any thoughts?

  Read the article

• VMWare ESXi virtual machine can contact the gateway but not the DNS server

  - by Nathan Palmer

  I am having a bit of a strange issue. I have a VMWare ESXi server with two virtual machines running on it. They are running just fine and can communicate on the network without a problem. I am now trying to add a third. I am installing Ubuntu 8.04 Server. I assign it a static IP address and it's a fresh installation. Once installed I can ping the gateway but I cannot ping the DNS server. It's on the same network with the other two VMs which are communicating just fine. I have tried to reinstall the operating system but it still fails to connect. Here is /etc/network/interfaces auto eth0 iface eth0 inet static address 192.168.1.23 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 208.67.222.222 #opendns dns-search mydomain.com Here is route Destination | Gateway | Genmask | Flags | Metric | Ref | Use | Iface localnet | * | 255.255.255.0 | U | 0 | 0 | 0 | eth0 default | 192.168.1.1 | 0.0.0.0 | UG | 100 | 0 | 0 | eth0 Since I'm running this behind a FortiGate this is what the sniff command gives me when I try to ping 208.67.222.222 arp who-has 192.168.1.1 tell 192.168.1.23 arp reply 192.168.1.1 is-at MAC 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request As you can see it looks like I never get a response. One interesting thing I notice is the arp reply's MAC doesn't look right. I have cleared the FortiGate's ARP cache though and checked the entry and it seems correct. The MAC it lists is the one for the router. However if I ping from a different virtual machine that is also Ubuntu 8.04 with a nearly identical configuration I get this. 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply So, what could I be missing? Thanks.

  Read the article

• Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

  - by mgorven

  I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

  Read the article

• How to prevent delays associated with IPv6 AAAA records?

  - by Nic

  Our Windows servers are registering IPv6 AAAA records with our Windows DNS servers. However, we don't have IPv6 routing enabled on our network, so this frequently causes stall behaviours. Microsoft RDP is the worst offender. When connecting to a server that has a AAAA record in DNS, the remote desktop client will try IPv6 first, and won't fall back to IPv4 until the connection times out. Power users can work around this by connecting to the IP address directly. Resolving the IPv4 address with ping -4 hostname.foo always works instantly. What can I do to avoid this delay? Disable IPv6 on client? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Too many clients to ensure this is set everywhere consistently. Will cause more problems later when we finally implement IPv6. Disable IPv6 on the server? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Requires an inconvenient registry hack to disable the entire IPv6 stack. Ensuring this is correctly set on all servers is inconvenient. Will cause more problems later when we finally implement IPv6. Mask IPv6 records on the user-facnig DNS recursor? Nope, we're using NLNet Unbound and it doesn't support that. Prevent registration of IPv6 AAAA records on the Microsoft DNS server? I don't think that's even possible. At this point, I'm considering writing a script that purges all AAAA records from our DNS zones. Please, help me find a better way. UPDATE: DNS resolution is not the problem. As @joeqwerty points out in his answer, the DNS records are returned instantly. Both A and AAAA records are immediately available. The problem is that some clients (mstsc.exe) will preferentially attempt a connection over IPv6, and take a while to fall back to IPv4. This seems like a routing problem. The ping command produces a "General failure" error message because the destination address is unroutable. C:\Windows\system32>ping myhost.mydomain Pinging myhost.mydomain [2002:1234:1234::1234:1234] with 32 bytes of data: General failure. General failure. General failure. General failure. Ping statistics for 2002:1234:1234::1234:1234: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), I can't get a packet capture of this behaviour. Running this (failing) ping command does not produce any packets in Microsoft Network Monitor. Similarly, attempting a connection with mstsc.exe to a host with an AAAA record produces no traffic until it does a fallback to IPv4. UPDATE: Our hosts are all using publicly-routable IPv4 addresses. I think this problem might come down to a broken 6to4 configuration. 6to4 behaves differently on hosts with public IP addresses vs RFC1918 addresses. UPDATE: There is definitely something fishy with 6to4 on my network. When I disable 6to4 on the Windows client, connections resolve instantly. netsh int ipv6 6to4 set state disabled But as @joeqwerty says, this only masks the problem. I'm still trying to find out why IPv6 communication on our network is completely non-working.

  Read the article

• Ubuntu 10.04: OpenVZ Kernel and pure-ftpd issues on HOST (no guest setup yet)

  - by Seidr

  After compiling and installing the OpenVZ flavour of kernel under Ubuntu 10.04, I am unable to browse to certain directories when connecting to the pure-ftpd server. The clients are dropping into PASSIVE mode, which is fine. This behaviour was happening before the change of kernel, however now when I browse to certain directories the connection just gets dropped. This only happens with a few directories under one login (web in specific), where as with another login it happens as soon as I connect. I've got the nf_conntrack_ftp kernel module installed (required to keep track of passive FTP connections as I understand, and an alias of the ip_conntrack_ftp module), however this has provided no alleviation of my problem. This module was actually required upon initial setup of my OS to get passive FTP working correctly, however when I compiled the OpenVZ kernel a lot of these modules were missing (iptables, conntrack etc). I recompiled the kernel with the missing modules, but to no effect. I've turned verbosity for the pure-ftpd server up, and still no clues have been spotted in either syslog or the transfer log. Neither did an strace provide any clues (that I could discern anyway) - although one strange thing is both in the output to the client and in the strace I notice that it does infact probe the directory and return the number of matches - it just fails after that. One more thing to mention is that if I FTP using the same credentials locally, everything works fine. This suggests that it is in fact an issue with either the conntrack_ftp module not functioning as expected, or a deeper networking issue. The Kernel was compiled and installed following the instructions at https://help.ubuntu.com/community/OpenVZ - bar the changes to the Kernel configuration (such as add iptables as a module). Below is an example of the log sent to the data (under FileZilla). Status: Resolving address of xxxx.co.uk Status: Connecting to 78.46.xxx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 4 of 10 allowed. Response: 220-Local time is now 08:52. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER xxx Response: 331 User xxx OK. Password required Command: PASS ******** Response: 230-User xxx has group access to: client1 sshusers Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Status: Directory listing successful Status: Retrieving directory listing... Command: CWD /web Response: 250 OK. Current directory is /web Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PORT 10,0,2,30,14,143 Response: 500 I won't open a connection to 10.0.2.30 (only to 188.220.xxx.xxx) Command: PASV Response: 227 Entering Passive Mode (78,46,79,147,234,110) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 57 matches total Error: Could not read from transfer socket: ECONNRESET - Connection reset by peer Error: Failed to retrieve directory listing Any suggestions please? I'm willing to try anything!

  Read the article

• Cannot browse network shares in Windows Explorer, but paths are still accessible

  - by Jeff Lockhart

  Windows Explorer has somehow corrupted itself and I'm not sure how to fix this problem. My Windows installation has been in use for a few years with network shares setup and working. Recently, I noticed that a program that I use to save network share paths to a database was no longer opening the explorer window to browse the path. It usually opens to the last path saved, but now it was just not opening at all. When I go to Windows Explorer to browse the network share directly, I get the error \\SERVER is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid. The network shares are just shares on the server itself (once saved to the database, they're used on the server as well as clients to reach files). The strange thing is, the files are still accessible from the program that uses them if I type the network share path in manually. So it is only a problem with Windows Explorer browsing the path. The reason I think there is some sort of configuration or setting, possibly in the registry, corrupted is that when the problem first manifest itself, I was somehow able to open an explorer window to a network share path, but the breadcrumb in the address bar did not function properly. It duplicated the share name folder at the top of the breadcrumb stack and when I clicked the second of the duplicated share folder, it crashed explorer.exe. I haven't been able to browse any network share path since this happened. I have tried using the IP address directly \\192.168.1.# as well as \\localhost and neither of those work either. I have tried running sfc /scannow and it did not find any errors. I tried ipconfig /flushdns and this made no difference. Attempting to map the network share to a drive fails using either the explorer GUI or net use command. Is there some way to reset Windows Explorer somehow to resolve this? I'd really like to avoid reinstalling Windows entirely if I can.

  Read the article

• RHEL5: Can't create sparse file bigger than 256GB in tmpfs

  - by John Kugelman

  /var/log/lastlog gets written to when you log in. The size of this file is based off of the largest UID in the system. The larger the maximum UID, the larger this file is. Thankfully it's a sparse file so the size on disk is much smaller than the size ls reports (ls -s reports the size on disk). On our system we're authenticating against an Active Directory server, and the UIDs users are assigned end up being really, really large. Like, say, UID 900,000,000 for the first AD user, 900,000,001 for the second, etc. That's strange but should be okay. It results in /var/log/lastlog being huuuuuge, though--once an AD user logs in lastlog shows up as 280GB. Its real size is still small, thankfully. This works fine when /var/log/lastlog is stored on the hard drive on an ext3 filesystem. It breaks, however, if lastlog is stored in a tmpfs filesystem. Then it appears that the max file size for any file on the tmpfs is 256GB, so the sessreg program errors out trying to write to lastlog. Where is this 256GB limit coming from, and how can I increase it? As a simple test for creating large sparse files I've been doing: dd if=/dev/zero of=sparse-file bs=1 count=1 seek=300GB I've tried Googling for "tmpfs max file size", "256GB filesystem limit", "linux max file size", things like that. I haven't been able to find much. The only mention of 256GB I can find is that ext3 filesystems with 2KB blocks are limited to 256GB files. But our hard drives are formatted with 4K blocks so that doesn't seem to be it--not to mention this is happening in a tmpfs mounted ON TOP of the hard drive so the ext3 partition shouldn't be a factor. This is all happening on a 64-bit Red Hat Enterprise Linux 5.4 system. Interestingly, on my personal development machine, which is a 32-bit Fedora Core 6 box, I can create 300GB+ files in tmpfs filesystems no problem. On the RHEL5.4 systems it is no go.

  Read the article

• HOSTS ignored when disconnected [closed]

  - by Synetech

  Problem I’m seeing a strange and extremely frustrating problem. Any system that is not connect to the Internet (Windows 7 shows the no Internet access icon because it cannot constantly ping Microsoft’s servers) cannot even access locally hosted servers. Hypothesis The problem appears to be that the HOSTS file is not being used to resolve DNS entries when there are no active NICs. Tests / Reproduction You can reproduce it as so: Disconnect a system from the Internet (make sure all wired and wireless connections are disconnected). If necessary, add an entry to the HOSTS file (e.g., 127.0.0.1 foobar or 127.0.0.1 foobar.com) Open a command-prompt Type ping foobar or ping foobar.com Observations The screenshots below show a clear and demonstrative example. In the first snap, a laptop is connected to a router wirelessly. The HOSTS file has only three entries and they resolve just fine. In the second snap, the wireless radio is turned off, so the entries in the HOSTS file are ignored. Moreover, notice that pinging localhost still works even without any active NICs (as does 127.0.0.1), but it is using the IPv6 address (must be hard-coded). You can see the same results in Windows XP with no IPv6 installed, so it has nothing to do with IPv6. I tried pining what should have resolved to 127.0.0.1 while the desktop system (with no wireless NICs) was connected via its Ethernet adapter, then again after pulling the cable from the router and waiting a couple of seconds, then again after plugging the cable back in. The same thing happens if instead of pulling out the cable, the NIC is disabled through software (the [Disable] button in the NIC’s Status dialog or via Device Manager). Conclusions It looks as though the HOSTS file is only being read and used if there is an active NIC, otherwise it is being ignored. This makes some sense in that if there are no active network adapters, then presumably there will not be any network activity, and thus no need to resolve host names via the HOSTS file. This assumption is specious however because it precludes locally hosted virtual servers. The HOSTS file should be used regardless of external DNS server connectivity, otherwise you cannot use simple/consistent/testing-production names for locally hosted servers when not connected to the Internet (for example web servers; help servers for Visual Studio, 3dsmax, etc.; and so on). Question Does anyone know how to force Windows to use the HOSTS file even if there are no active NICs? Appendix Figure 1: While the wireless NIC is connected to the router (the cable-modem is in standby, so no external Internet connectivity). Figure 2: With the wireless radio turned off (the Ethernet port is not unconnected in both cases). Figure 3: Same results in XP with no IPv6

  Read the article

• Python install issue on Mac OS X

  - by Michael Waterfall

  I have been using the standard python that comes with OS X Lion (2.7.2) but I wanted to build a UCS-4 version to handle 4-byte unicode characters better. I had already installed pip and packages like pytz, virtualenv and virtualenvwrapper, etc., and these are installed in /Library/Python/2.7/site-packages. My $PATH is /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin. To build a new version of python on the machine (outside of any project specific virtual environments, that will come later), I followed the instructions on this article and managed to build it in /usr/local/bin. The problem is that when I launched a new bash window, I got the following virtualenvwrapper error: Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named virtualenvwrapper.hook_loader virtualenvwrapper.sh: There was a problem running the initialization hooks. If Python could not import the module virtualenvwrapper.hook_loader, check that virtualenv has been installed for VIRTUALENVWRAPPER_PYTHON=/usr/local/bin/python and that PATH is set properly. The instructions said to move /usr/local/bin to the top of the /etc/paths file, and since then I've noticed some strange issues. I installed pip into /usr/local/bin and now I have assumed that since I'm working in /usr/local/bin, and the newly installed python's site packages is now located in /usr/local/lib/python2.7/site-packages, when I do pip freeze, it should be empty as nothing is installed there yet. However, pip freeze still reports things installed in the old (OS X) site-packages folder. Here's some info after the build: $ which python /usr/local/bin/python $ which pip /usr/local/bin/pip $ echo $PATH /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin When I uninstall a python package with pip, it removes it from the old site-packages folder as expected. When I install it again, instead of installing it in /usr/local/lib/python2.7/site-packages, it installs it in /Library/Python/2.7/site-packages (verified by attempting to install it again and receiving Requirement already satisfied (use --upgrade to upgrade): pytz in /Library/Python/2.7/site-packages ). How is it getting that path for the old site-packages folder? Why won't it install it in the correct location for the python install it's using? I'm getting several other issues since promoting /usr/local/bin but I think if I understand this I'll be able to get somewhere. Can anyone see what's happening? If you need any more info I'll be happy to provide it.

  Read the article

• networking tunnel adapter connections?

  - by Karthik Balaguru

  I understand that Tunnel Adapter LAN is for encapsulating IPv6 packets with an IPv4 header so that they can be sent across an IPv4 network. Few queries popped up in my mind based on this :- If i do 'ipconfig', Apart from ethernet adapter LAN details, I get a series of statments as below - Tunnel adapter Local Area Connection* 6 Tunnel adapter Local Area Connection* 7 Tunnel adapter Local Area Connection* 12 Tunnel adapter Local Area Connection* 13 Tunnel adapter Local Area Connection* 14 Tunnel adapter Local Area Connection* 15 Tunnel adapter Local Area Connection* 16 Except for the *16, all the other Tunnel Adapter Local Area Connections show Media Disconnected. Why is the numbering for the Tunnel adapter LAN not sequential? It is like 6, 7, 12, 13, 14, 15, 16. A strange numbering scheme! I tried to figure it out by thinking of some arithmetic series. But, it does not seem to fit in. There is a huge gap between 7 and 12. Any ideas? What is the need for so many Tunnel Adapter LAN connections? Can you tell me a scenario that requires all of those ? I did ipconfig /all to get more information. From the listing, I understand that: 16, 15, 14, 12 are Microsoft 6to4 Adapters 13, 6 are isatap Adapters 7 is Teredo Tunneling Pseudo-interface I understand that the above are for automatic tunneling so that the tunnel endpoints are determined automatically by the routing infrastructure. 6to4 is recommended by RFC3056 for automatic tunneling that uses protocol 41 for encapsulation. It is typically used when an end-user wants to connect to the IPv6 Internet using their existing IPv4 connection. Teredo is an automatic tunneling technique that uses UDP encapsulation across multiple NATs. That is, It is to grant IPv6 connectivity to nodes that are located behind IPv6-unaware NAT devices ISATAP treats the IPv4 network as a virtual IPv6 local link, with mappings from each IPv4 address to a link-local IPv6 address. That is to transmit IPv6 packets between dual-stack nodes on top of an IPv4 network. That is, to put in simple words, ISATAP is an intra-site mechanism, while the 6to4 and Teredo are for inter-site tunnelling mechanisms. It seems that Teredo should alone enabled by default in Vista, But my system does not show it to be enabled by default. Interestingly, it shows a 6to4 tunnel adapter (Tunnel adapter LAN connection 16) to be enabled by default? Any specific reasons for it? If i do ipconfig /all, why is only one Teredo present while four 6to4 are present ? I searched the internet for answers to the above queries, but I am unable to find clear answers.

  Read the article

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• Odd squid transparent redirect behavior

  - by EMiller

  This is the first time I've set up squid. It's running a redirect script that does some text search/replace on html pages, and then saves them to a location on the same machine on the nginx path - then issues the redirect to that URL (it's an art project :D). The relevant lines in squid.conf are http_port 3128 transparent redirect_program /etc/squid/jefferson_redirect.py The jefferson_redirect.py script is based on this script: http://gofedora.com/how-to-write-custom-redirector-rewritor-plugin-squid-python/ The issue: I'm getting strange http redirect behavior. For example, here is the normal request/response from a PHP script that issues a header("Location:"); - a 302 redirect: http://redirector.mysite.com/?unicmd=g+yreka GET /?unicmd=g+yreka HTTP/1.1 Host: redirector.mysite.com User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.5.9-1.fc12 Firefox/3.5.9 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive HTTP/1.1 302 Found Date: Tue, 13 Apr 2010 05:15:43 GMT Server: Apache X-Powered-By: PHP/5.2.11 Location: http://www.google.com/search?q=yreka Content-Type: text/html Vary: User-Agent,Accept-Encoding Content-Encoding: gzip Content-Length: 2108 Keep-Alive: timeout=3, max=100 Connection: Keep-Alive Here's what it looks like when running through the squid proxy (note that "redirector.mysite.com" is not the site running squid or nginx): http://redirector.mysite.com/?unicmd=g+yreka GET /?unicmd=g+yreka HTTP/1.1 Host: redirector.mysite.com User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.5.9-1.fc12 Firefox/3.5.9 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Proxy-Connection: keep-alive If-Modified-Since: Tue, 13 Apr 2010 05:21:02 GMT HTTP/1.0 200 OK Server: nginx/0.7.62 Date: Tue, 13 Apr 2010 05:21:10 GMT Content-Type: text/html Content-Length: 17865 Last-Modified: Tue, 13 Apr 2010 05:21:10 GMT Accept-Ranges: bytes X-Cache: MISS from jefferson X-Cache-Lookup: HIT from jefferson:3128 Via: 1.1 jefferson:3128 (squid/2.7.STABLE6) Connection: keep-alive Proxy-Connection: keep-alive It is basically working - but the URL http://redirector.mysite.com/?unicmd=g+yreka remains unchanged, while displaying the google page (mostly broken as it's using URLs relative to redirector.mysite.com) I've experienced a similar thing with google results pages: when clicking to another page from google, I get a google URL, with the other site's content. Sorry for the long post - many thanks if you've read this far! Any ideas?

  Read the article

• Blank displays after inactivity, mouse cursor not showing up

  - by Mike Christiansen

  I have a Windows 7 Enterprise x86 machine that is exhibiting some strange problems. After some inactivity (it varies how long it takes), when I come back to my computer, both of my monitors are black. The monitors are on, with a black display. Moving the mouse and pressing keys on the keyboard do not work. This happens at least once a day. When I first encountered the issue, I performed a hard shutdown and restarted the computer. About 10% of the time when I did this, the resolutions on my monitors were messed up. The native resolution on the primary monitor is 1600x900, and the native on my secondary is 1440x900. None of the widescreen resolutions would be present in the display properties. I had 800x600, 1024x768, and 1280x1024. As a workaround to this issue, I've found that if I plug in my secondary monitor as the primary monitor, and leave the secondary unplugged, then Windows will start in 1024x768 on the secondary. Then, I can use Windows 7's "Detect" feature and it finds the 1440x900 resolution, and sets it. Then I have to connect the primary monitor to the secondary port and set it as the primary. Then I can switch the two cables, putting the primary into the primary, the secondary into the secondary. Then use the "Detect" feature again, and it finds the correct resolutions. Some time after performing the above, I discovered that when the screens were blanked, I could simply press "Control+Alt+Delete", type in my password, and everything comes up fine - except my mouse cursor. All applications and features work as intended, except there is no mouse cursor (the mouse actually works though...). I have the "Show location of pointer when I press CTRL key" option selected, so I can press CTRL and use my mouse as normal - but I have no actual cursor. When the computer is in this state, UAC is also not functional. Whenever a UAC prompt appears, the screens go black (the original symptoms) and I have to press Escape to exit UAC. Because of the above symptoms (the UAC black screen thing, etc) I beleive winlogon.exe may be the culprit. However, I have no idea how to fix it. I am unable to restart winlogon.exe due to the problems I am having with winlogon.exe (the UAC black screen) Looking for any ideas.... More information Windows 7 x86 Enterprise Domain environment (I have a secondary account with administrator rights) Dell Optiplex 960 Cannot perform "optional" windows updates due to an activation issue (I am testing a windows 7 image, and an activation infrastructure has not been created yet. However, this issue was happening before I was unable to perform windows update, and windows was up to date at the time Updated video card driver (as an attempt to fixing the resolution issue) Disabled all power saving options Please let me know what else you need to help me solve this issue! Thanks in advance, Mike

  Read the article

• Tomcat can't talk to MySql after outage

  - by gav

  I missed a payment for my server and hey suspended my account for a day or so. When they brought the server back up all my data was in tact but for some reason Tomcat can't make a JDBC connection to my MySql server. They both run on the same machine and hence I have a bind address of 127.0.0.1. It's strange because I have reset the machine of my own accord before without issue but clearly something has been reset in the downtime. I followed this guide (Just the bits which don't concern S3, I am not on Amazon infrastructure) originally and everything worked as expected. I'm very new to being a SysAdmin and I'm not sure what to try, how would you go about diagnosing this issue? The stack trace I get is as follows; INFO: Deploying web application archive myapp-1.1.war 2010-05-26 22:07:22,221 [main] ERROR context.ContextLoader - Context initialization failed org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'messageSource': Initialization of bean failed; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager': Cannot resolve reference to bean 'sessionFactory' while setting bean property 'sessionFactory'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'sessionFactory': Cannot resolve reference to bean 'hibernateProperties' while setting bean property 'hibernateProperties'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'hibernateProperties': Cannot resolve reference to bean 'dialectDetector' while setting bean property 'properties' with key [hibernate.dialect]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'dialectDetector': Invocation of init method failed; nested exception is org.springframework.jdbc.support.MetaDataAccessException: Could not get Connection for extracting meta data; nested exception is org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.codehaus.groovy.grails.commons.spring.ReloadAwareAutowireCapableBeanFactory.doCreateBean(ReloadAwareAutowireCapableBeanFactory.java:129) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:450) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:290) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:287) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193) at org.springframework.context.support.AbstractApplicationContext.initMessageSource(AbstractApplicationContext.java:714) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:404) at org.codehaus.groovy.grails.commons.spring.GrailsWebApplicationContext.refresh(GrailsWebApplicationContext.java:153) ... I get this error for a number of 'beans'. If I type mysql at my command prompt then I can easily login with the same credentials as my grails app which uses GORM and Hibernate to persist objects to the DB. I might not have given enough info to start with but I'm really interested to learn and will certainly provide it if asked, I just really don't know where to start on this one. Thanks, Gav

  Read the article

• IP address reuse on macvlan devices

  - by Alex Bubnoff

  I'm trying to create easy to use and possibly simple testing environment for some product and got some strange behaviour of macvlan's. What I'm trying to achieve: make a toolset for one-line start/stop of lxc containers(via docker) bound to external ip(I have enough of it on host machine). So, I'm doing something like this: docker run -d -name=container_name container_image pipework eth1 container_name ip/prefix_len@gateway and pipework here does this: GUEST_IFNAME=ph$NSPID$eth1 ip link add link eth1 dev $GUEST_IFNAME type macvlan mode bridge ip link set eth1 up ip link set $GUEST_IFNAME netns $NSPID ip netns exec $NSPID ip link set $GUEST_IFNAME name eth1 ip netns exec $NSPID ip addr add $IPADDR dev eth1 ip netns exec $NSPID ip route delete default ip netns exec $NSPID ip link set eth1 up ip netns exec $NSPID ip route replace default via $GATEWAY ip netns exec $NSPID arping -c 1 -A -I eth1 $IPADDR And it works for first time per IP. But for second time and later packets for containers IP isn't getting into container, while all configuration seem fine. So it looks like this: External machine ? ping 212.76.131.212 ....silence.... Host machine root@ubuntu:~# ip link show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# tcpdump -v -i eth1 icmp tcpdump: WARNING: eth1: no IPv4 address assigned tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 00:00:46.542042 IP (tos 0x0, ttl 60, id 9623, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2345, length 64 00:00:47.549969 IP (tos 0x0, ttl 60, id 9624, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2346, length 64 00:00:48.558143 IP (tos 0x0, ttl 60, id 9625, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2347, length 64 00:00:49.566319 IP (tos 0x0, ttl 60, id 9626, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2348, length 64 00:00:50.573999 IP (tos 0x0, ttl 60, id 9627, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2349, length 64 ^C 5 packets captured 5 packets received by filter 0 packets dropped by kernel 1 packet dropped by interface Host machine, netns of container root@ubuntu:~# ip netns exec 32053 ip link show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip netns exec 32053 ip addr show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff inet 212.76.131.212/29 scope global eth1 inet6 fe80::b012:f7ff:fecc:a19d/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip netns exec 32053 tcpdump -v -i eth1 icmp tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes ....silence.... ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel So, can anyone say, what can it be? Can this be caused by not a bug in macvlan implementation? Is there any tools I can use to debug that configuration?

  Read the article

• iPhone doesn't save password for Cisco IPsec VPN using racoon daemon

  - by dsx

  On my Debian server I had set up racoon daemon (1:0.8.0-14) for Cisco IPSec VPN using certificates for authentication. My racoon.conf is like following: log info; path certificate "/etc/racoon/certs"; listen { isakmp $SERVER_IP_HERE [500]; isakmp_natt $SERVER_IP_HERE [4500]; } timer { natt_keepalive 10 sec; } remote anonymous { lifetime time 24 hours; proposal_check obey; passive on; exchange_mode aggressive,main; my_identifier asn1dn; peers_identifier asn1dn; verify_identifier on; certificate_type x509 "cert_name.crt" "key_name.key"; ca_type x509 "ca.crt"; mode_cfg on; verify_cert on; ike_frag on; generate_policy on; nat_traversal on; dpd_delay 20; proposal { encryption_algorithm aes; hash_algorithm sha1; authentication_method xauth_rsa_server; dh_group modp1024; } } mode_cfg { conf_source local; auth_source system; auth_throttle 3; save_passwd on; dns4 8.8.8.8; network4 $SOME_LAN_SUBNET; netmask4 255.255.255.0; pool_size 128; } sainfo anonymous { pfs_group 2; lifetime time 24 hour; encryption_algorithm aes; authentication_algorithm hmac_sha1; compression_algorithm deflate; } I'm not using PSK authentication here. Using iPhone configuration utility I had uploaded all required certificates to iPhone and set up VPN on demand. Everything works just fine except one thing: iPhone refuses to save VPN password regardless of save_passwd on; in racoon configuration file. As opposed to iPhone behaviour, Mac OS X 10.8.2 have no problems saving password. I had examined iPhone log file and found following: racoon[151] <Notice>: >>>>> phase change status = phase 1 established configd[50] <Notice>: IPSec Network Configuration started. configd[50] <Notice>: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = $SUBNET_IP_HERE. configd[50] <Notice>: IPSec Network Configuration: INTERNAL-IP4-MASK = 255.255.255.0. configd[50] <Notice>: IPSec Network Configuration: SAVE-PASSWORD = 0. configd[50] <Notice>: IPSec Network Configuration: INTERNAL-IP4-DNS = 8.8.8.8. configd[50] <Notice>: IPSec Network Configuration: BANNER = . configd[50] <Notice>: IPSec Network Configuration: DEF-DOMAIN = . configd[50] <Notice>: IPSec Network Configuration: DEFAULT-ROUTE = local-address $SUBNET_IP_HERE/32. configd[50] <Notice>: IPSec Phase2 starting. configd[50] <Notice>: IPSec Network Configuration established. configd[50] <Notice>: IPSec Phase1 established. Please note IPSec Network Configuration message containing SAVE-PASSWORD = 0.. Is it a bug in racoon daemon on server, or iPhone (iOS version is 6.0.1 (10A523)) or it is me missing something? How to make iPhone remember IPSec VPN password?

  Read the article

• "No route to host" with ssl but not with telnet

  - by Clemens Bergmann

  I have a strange problem with connecting to a https site from one of my servers. When I type: telnet puppet 8140 I am presented with a standard telnet console and can talk to the Server as always: Connected to athena.hidden.tld. Escape character is '^]'. GET / HTTP/1.1 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>400 Bad Request</title> </head><body> <h1>Bad Request</h1> <p>Your browser sent a request that this server could not understand.<br /> Reason: You're speaking plain HTTP to an SSL-enabled server port.<br /> Instead use the HTTPS scheme to access this URL, please.<br /> <blockquote>Hint: <a href="https://athena.hidden.tld:8140/"><b>https://athena.hidden.tld:8140/</b></a></blockquote></p> <hr> <address>Apache/2.2.16 (Debian) Server at athena.hidden.tld Port 8140</address> </body></html> Connection closed by foreign host. But when I try to connect to the same host and port with ssl: openssl s_client -connect puppet:8140 It is not working connect: No route to host connect:errno=113 I am confused. At first it sounded like a firewall problem but this could not be, could it? Because this would also prevent the telnet connection. As Firewall I am using ferm on both servers. The systems are debian squeeze vm-boxes. [edit 1] Even when I try to connect directly with the IP address: openssl s_client -connect 198.51.100.1:8140 #address exchanged connect: No route to host connect:errno=113 Bringing down the firewalls on both hosts with service ferm stop is also not helping. But when I do openssl s_client -connect localhost:8140 on the server machine it is connecting fine. [edit 2] if I connect to the IP with telnet it also is not working. telnet 198.51.100.1 8140 Trying 198.51.100.1... telnet: Unable to connect to remote host: No route to host The confusion might come from IPv6. I have IPv6 on all my hosts. It seems that telnet uses IPv6 by default and this works. For example: telnet -6 puppet 8140 works but telnet -4 puppet 8140 does not work. So there seems to be a problem with the IPv4 route. openssl seems to only (or by default) use IPv4 and therefore fails but telnet uses IPv6 and succeeds.

  Read the article

• Wiimote accelerometer input on Windows? (in 2013 - Glovepie alternative?)

  - by user568458

  There were a few options for getting accelerometer input into Windows using a Nintendo Wiimote. As of mid 2013, these projects seem to be dead, corrupted with malware, or both. Are there any tools out there that can do this that are still available (and not full of malware)? Quick roundup of the options that used to exist, or that still exist but aren't suitable: Glovepie, which used to be the most recommended option, appears to be dead: it's own website hacked, its creator's googlepages page full of strange stuff that sounds like hacker-humour about the end of the world... (I'd rather not link to them, very dubious stuff...), and lots of forum threads asking if it's a dead project with comments along the lines of "I heard that the author intends to return to it" dated 2011... Wiiuse seems to be dead: its sourceforge page simply says "Error.", its own website has turned into a squatter page. There apparently was an extension for Autohotkey that allowed Wiimote input, but I've seen warnings that this too is now full of malware (see final commentin above link) Everything else I can find about using Wiimotes as input on Windows - for example, Johnny Lee Cheng's work - seems to be exclusively about using infrared or sensor bar, or tied to a specific purpose (e.g. FPS gaming). My main interest is in the accelerometer, and buttons if possible (although something that supports the IR stuff too would be ideal). Is there anything that works for getting Wiimote accelerometer input into Windows that is reliable and not a malware-fest? If anyone's interested in "Why?", it's to use the Wiimote as an audio / midi controller: to use movement, pitch, roll etc to modulate lots of different sound variables at once with one hand. Wiimotes are great for this, and Glovepie used to be the standard way to make this work (e.g. see for example this tutorial, and this one, ignore the unrelated video; I've also seen musicians using wiimote/glovepie setups at gigs, creating some really unique sounds). As of 2013, however, Glovepie seems to be a dead and thoroughly hacked project, sadly. Is there anything else? With or without MotionPlus is fine (with would be better). If anyone knows of any worthy alternatives to Wiimotes in terms of price and quality that can be made to work with a PC, that would also be great: but in my research I coulnd't find any (here's a link to someone reaching the same conclusion). found some potentially relevant stuff here, not had time to test any of it yet though - http://stackoverflow.com/questions/2984450/using-accelerometer-in-wiimote-for-physics-practicals

  Read the article

• Difference between `curl -I` and `curl -X HEAD`

  - by chmeee

  I was wathcing the funny server type from http://www.reddit.com with curl -I http://www.reddit.com when I guessed that curl -X HEAD http://www.reddit.com would do the same. But, in fact, it doesn't. I'm curious about why. This is what I observe running the two commands: curl -I: works as expected, outputs the header and exists. curl -X HEAD: does not show anything and seems to wait for user input. But, sniffing with tshark I see the second command actually sends the same HTML query and receives the correct answer, but it does not show it and it doesn't close the connection. curl -I 0.000000 333.33.33.33 -> 213.248.111.106 TCP 59675 > http [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=47267342 TSER=0 WS=6 0.045392 213.248.111.106 -> 333.33.33.33 TCP http > 59675 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1460 TSV=2552532839 TSER=47267342 WS=1 0.045441 333.33.33.33 -> 213.248.111.106 TCP 59675 > http [ACK] Seq=1 Ack=1 Win=5888 Len=0 TSV=47267353 TSER=2552532839 0.045623 333.33.33.33 -> 213.248.111.106 HTTP HEAD / HTTP/1.1 0.091665 213.248.111.106 -> 333.33.33.33 TCP http > 59675 [ACK] Seq=1 Ack=155 Win=6432 Len=0 TSV=2552532886 TSER=47267353 0.861782 213.248.111.106 -> 333.33.33.33 HTTP HTTP/1.1 200 OK 0.861830 333.33.33.33 -> 213.248.111.106 TCP 59675 > http [ACK] Seq=155 Ack=321 Win=6912 Len=0 TSV=47267557 TSER=2552533656 0.862127 333.33.33.33 -> 213.248.111.106 TCP 59675 > http [FIN, ACK] Seq=155 Ack=321 Win=6912 Len=0 TSV=47267557 TSER=2552533656 0.910810 213.248.111.106 -> 333.33.33.33 TCP http > 59675 [FIN, ACK] Seq=321 Ack=156 Win=6432 Len=0 TSV=2552533705 TSER=47267557 0.910880 333.33.33.33 -> 213.248.111.106 TCP 59675 > http [ACK] Seq=156 Ack=322 Win=6912 Len=0 TSV=47267570 TSER=2552533705 curl -X HEAD 34.106389 333.33.33.33 -> 213.248.111.90 TCP 51690 > http [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=47275868 TSER=0 WS=6 34.149507 213.248.111.90 -> 333.33.33.33 TCP http > 51690 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1460 TSV=3920268348 TSER=47275868 WS=1 34.149560 333.33.33.33 -> 213.248.111.90 TCP 51690 > http [ACK] Seq=1 Ack=1 Win=5888 Len=0 TSV=47275879 TSER=3920268348 34.149646 333.33.33.33 -> 213.248.111.90 HTTP HEAD / HTTP/1.1 34.191484 213.248.111.90 -> 333.33.33.33 TCP http > 51690 [ACK] Seq=1 Ack=155 Win=6432 Len=0 TSV=3920268390 TSER=47275879 34.192657 213.248.111.90 -> 333.33.33.33 TCP [TCP Dup ACK 15#1] http > 51690 [ACK] Seq=1 Ack=155 Win=6432 Len=0 TSV=3920268390 TSER=47275879 34.823399 213.248.111.90 -> 333.33.33.33 HTTP HTTP/1.1 200 OK 34.823453 333.33.33.33 -> 213.248.111.90 TCP 51690 > http [ACK] Seq=155 Ack=321 Win=6912 Len=0 TSV=47276048 TSER=3920269022 Any idea about why this difference in behaviour?

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >