Search Results

Search found 9091 results on 364 pages for 'thinking'.

Page 270/364 | < Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >

• Exchange on SBS2003 not receiving mail, but sending via telnet works

  - by YDdraigLas

  Last week we had a problem on our SBS2003 server where our external connection dropped out and I was only able to restore it by running netsh winsock reset catalog and netsh int ip reset. Thinking all was well, I went home for the weekend and came in today to find that we haven't received any external emails since before the original problems occurred. There are plenty of examples of this on the internet, usually to do with a firewall issue, but the odd thing here is that when I connect using telnet I can send an email and it goes straight through and into my inbox. When I send an email from Gmail or Hotmail nothing comes through at all. Internal emails are also unaffected, as are outgoing emails. There have also been a couple of emails that have come through for other users, both out-of-office replies, if that's relevant. I've run the CEICW several times, checked all the NIC settings, but no joy. Before I give up trying to fix this and reinstall the whole server, has anyone come across this problem before? I have only found fleeting references to this in previous searches and no real answers. Any advice gratefully received.

  Read the article

• Expire Files In A Folder: Delete Files After x Days

  - by Brett G

  I'm looking to make a "Drop Folder" in a windows shared drive that is accessible to everyone. I'd like files to be deleted automagically if they sit in the folder for more than X days. However, it seems like all methods I've found to do this, use the last modified date, last access time, or creation date of a file. I'm trying to make this a folder that a user can drop files in to share with somebody. If someone copies or moves files into here, I'd like the clock to start ticking at this point. However, the last modified date and creation date of a file will not be updated unless someone actually modifies the file. The last access time is updated too frequently... it seems that just opening a directory in windows explorer will update the last access time. Anyone know of a solution to this? I'm thinking that cataloging the hash of files on a daily basis and then expiring files based on hashes older than a certain date might be a solution.... but taking hashes of files can be time consuming. Any ideas would be greatly appreciated! Note: I've already looked at quite a lot of answers on here... looked into File Server Resource Monitor, powershell scripts, batch scripts, etc. They still use the last access time, last modified time or creation time... which, as described, do not fit the above needs.

  Read the article

• Should I buy more RAM for my computer or a better CPU?

  - by Reijer The Coder

  I have recently bought a new laptop, an ASUS N56VJ-S4149H. I bought it to use it in all possible ways I could want, so that would be gaming downloading and streaming movies browsing the web and programming software. So far it has been running great but one thing annoys me a little bit. I frequently play Mount&Blade: Warband, it's a great game and you should check it out. Everything runs smoothly but only when I turn down the 'Texture Detail'. Otherwise it will lag a lot and I can't really play. Now my question is: Is this a problem of not enough RAM? At first I was really sure it was but after thinking about for a while I'm not anymore. My computer only has 4 Gigabytes of RAM and there is still a slot open. So will it improve when I buy another 8 Gigabytes? EDIT: It has an Nvidia GeForce GT 635M inside. and an Intel Core i5 3230M CPU with 2,6 GHz. Help and answers are really appreciated. Thanks to all.

  Read the article

• Assembly Level Language? Unlock iPhone 3GS with latest Baseband. Need Opinion

  - by getkenny

  Hi Guys, So its more like advice i need. I got 2 iPhone 3GS (Bootloader 06.02 and BB 05.11) which are lying around useless cause it was bought it from US and now i am in Dubai. Cannot use the phone because there is no unlock. Now rather than waiting and relying on other people to provide a unlock for the baseband , i was thinking of learning what it takes to unlock a iPhone. I currently don't even know what i got to learn to do this. I understand from soem reading around that i will need to learn ARM to understand the baseband and try to find a exploit: is it correct? I really want to help people out in getting their iPhones working. Also the iPhones cost was $645 each (16GB) so its not like Apple is going to loose any money of it, the person who bought it for me thought that if your not buying with an AT&T contract it means that it is unlocked but it is not true. I need help, i am willing to learn and you guys are the best bunch around to give me advice. Regards.

  Read the article

• Exchange 2010 mail routing with Hub Transport in multiple sites

  - by jmreicha

  I have two separate physical sites, Site A and Site B. In site A, I have following: 2 CAS servers 2 Hub Transport servers 2 Mailbox servers 2 Edge servers In site B, I have the following: 1 CAS 1 Hub 1 Mailbox 1 Edge Currently everything is working out of site A. That is, all users are housed on mailboxes that are in site A and all inbound mail flow is pointing to site A. I would eventually like to be able to move some of the mailboxes to site B without causing a disruption for resliency and redundancy purposes but I am not quite sure how to go about setting this up or if it is even possible. So far I have created an Edge subscription in site B and am able to send emails out from test accounts set up with mailboxes on the site B Mailbox server. However, I am unable to receive incoming mail messages and am confused. So I'm thinking incoming mail messages are still being directed to site A and then they are getting stuck because there is no way to route the mail to the site B mailboxes. Is this assumption correct? I am unfamiliar with mail flow and routing so I am not really sure what I need to be looking at? Would I add the site B hub transport to the Edge subscription in site A? Or I guess more specifically, how would I go about enabling communication and mail flow between mailboxes split up on site A and B?

  Read the article

• HP/IBM alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/IBM? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• Network card shuts down when stressed

  - by user142485

  I have a network card that functions fine with light use, but quits functioning after heavy use. I replaced it with a brand new one and still have the same issue, also updated drivers. It is a wired D-Link card. The Internet seems fine for a small amount of web browsing but when I run a bandwidth test it starts out fast and slows quickly until the card completely quits; I have a constant ping of the gateway going while I run this and it starts timing out after a couple seconds into the speed test. The card will stay on and the data light on it still flashes some but I cannot ping the gateway or anything else until the computer is rebooted. When I boot into safe mode I can browse and run the speed test fine with no problems. I am guessing that this is probably some program that is loading in regular mode but not safe mode that is causing the issue? I have very limited software (turned off av and firewall) on the computer but I am thinking that I'll just have to start eliminating start-up programs and see if that helps. This is on Windows 7 if that makes any difference. Anyone had a similar issue or have any other suggestions/ideas for narrowing down this problem?

  Read the article

• How to use LVM on Rackspace Cloud

  - by batrick

  Dear all, I am trying to set up a simple but effective solution to make a backup of my rackspace cloud servers. These servers each run subversion, trac, and some database-backed custom php applications. My idea is to set up a LVM and mount a volume under, say, /srv. In this volume, I keep the data from all applications. Instead of caring about how to back-up each app in a different way (svn hotcopy, trac-admin hotcopy, huge mess for mysql), I simply take an LVM snapshot and back this one up cloud files using the excellent cloudcity script (http://github.com/jspringman/cloudcity/blob/master/cloudcity). The advantage of this solution is that it is quick and easy, and LVM allows to make decent backups. As more apps are added, it should not be required to change the backup script much. The downside, and main point of my question here, is that I am not sure how to get LVM working on Rackspace cloud, because there is only one root volume and no service like Amazon's EBS. I was thinking it may be possible to create a large empty file and use this as a "physical volume". Has anybody done anything like this before? Or do you know why it can never work? It would be great to hear from you. Thanks, batrick

  Read the article

• Recovery disk Windows 8 HP Pavilion g6

  - by fpghost

  I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

  Read the article

• Different subnets routing with just one layer 3 switch

  - by GustavoFSx

  Our current network looks like this: Location 1: 2 Layer 2 switches | subnet 192.168.1.0/24 | Firewall for our VPN Location 2: 1 Layer 2 switch | subnet 192.168.3.0/24 | Firewall for our VPN Location 3: 1 Layer 2 switch | subnet 192.168.5.0/24 | Firewall for our VPN We just got a direct fiber connection between location 1 and 2, we also got a new HP V1910 24G layer 3 switch. I tried to follow the instructions on this site, but I can't get it to work. I think our network should look like this: Location 1: HP Switch FIBER to L2 | subnet 192.168.1.0/24 | Firewall for our VPN Location 2: 1 Layer 2 switch | subnet 192.168.3.0/24 | FIBER to L1 Location 3: 1 Layer 2 switch | subnet 192.168.5.0/24 | Firewall for our VPN So, how can I get routing working on our location 2? It's old gateway was a firewall device on ip 192.168.3.1. I'm thinking on creating a VLAN Interface on 192.168.3.1 on the switch for the Location 2. But how will I handle that on the HP switch that has a direct fiber connection with that switch? Please help, I'm not very good with networking.

  Read the article

• Zero downtime deployment (Tomcat), Nginx or HAProxy, behind hardware LB - how to "starve" old server?

  - by alexeypro

  Currently we have the following setup. Hardware Load Balancer (LB) Box A running Tomcat on 8080 (TA) Box B running Tomcat on 8080 (TB) TA and TB are running behind LB. For now it's pretty complicated and manual job to take Box A or Box B out of LB to do the zero downtime deployment. I am thinking to do something like this: Hardware Load Balancer (LB) Box A running Nginx on 8080 (NA) Box A running Tomcat on 8081 (TA1) Box A running Tomcat on 8082 (TA2) Box B running Nginx on 8080 (NB) Box B running Tomcat on 8081 (TB1) Box B running Tomcat on 8082 (TB2) Basically LB will be directing traffic between NA and NB now. On each of Nginx's we'll have TA1, TA2 and TB1, TB2 configured as upstream servers. Once one of the upstreams's healthcheck page is unresponsive (shutdown) the traffic goes to another one (HttpHealthcheckModule module on Nginx). So the deploy process is simple. Say, TA1 is active with version 0.1 of the app. Healthcheck on TA1 is OK. We start TA2 with Healthcheck on it as ERROR. So Nginx is not talking to it. We deploy app version 0.2 to TA2. Make sure it works. Now, we switch the Healthcheck on TA2 to OK, switch Healthcheck to TA1 to ERROR. Nginx will start serving TA2, and will remove TA1 out of rotation. Done! And now same with the other box. While it sounds all cool and nice, how do we "starve" the Nginx? Say we have pending connections, some users on TA1. If we just turn it off, sessions will break (we have cookie-based sessions). Not good. Any way to starve traffic to one of the upstream servers with Nginx? Thanks!

  Read the article

• CMSs & ERPs for hospital management system

  - by Akshey

  Hi, What are the best free CMSs or CMS plugins or ERPs or any other free tools available for developing a hospital management system? I want to develop it for a children's hospital run by my father. The hospital is small with two doctors. Currently, everything is done manually on paper. The main entities who will be using the system are: Receptionist, the two doctors, chemist and the medical laboratorist. They will use it majorly for keeping the records of the patient. The patients would not be interacting with the system directly. The system needs to be user friendly and should be easy to learn. I was thinking to develop such a system using a CMS or an ERP or any other free tool. I have used wordpress/drupal in past but never used an ERP. Can you please guide me to make such a system using free, and preferably open source, tools? Update: I think it will be mostly a form driven system. What would be easy and better: creating the forms in drupal or using a php framework like symphony or cakePHP? Thanks, Akshey

  Read the article

• File corruption (bad checksums) in large files copied to VMware guest

  - by AllanA

  In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

  Read the article

• How do I setup routing for two companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: Two companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants its own Internet connection (ISP A) and company B wants its own Internet connection (ISP B). VLANs are deployed internally to separate the two companies' networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I set up policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• Exchange 2010 SP2 database size

  - by Chad

  I have a single Exchange 2010 sp2 environment with 3 DB stores. I am trying to reduce the sizes by moving the mailboxes to a spare DB and then deleting the empty database. I cleaned up the users mailboxes to reduce the sizes and set the retention periods to 1 day each and waited several days before moving mailboxes. The databases are backing up fine and clearing logs files but when I move the mailboxes I noticed they were taking a long time, even though some were less than 100MB. When I checked the new database size it seems like the orginal mailbox size might be moving (1GB instead of 100MB). Exchange is showing the expected smaller mailbox sizes when I run get-mailbox statistics against the DB. So if I have 5 mailboxes 100MB each it is showing like 3GB instead of around 500MB, and no whitespace. I keep waiting thinking mailby the retention period is not expired yet but it is much longer than 1 day already. I am setting them both to 0 today to see if that works. What am I missing to get the combined mailbox sizes to match the DB size minus whitespace?

  Read the article

• Developing high-performance and scalable zend framework website

  - by Daniel

  We are going to develop an ads website like http://www.gumtree.com/ (it will not be like this one but just to give you an ideea) and we are having some issues regarding performance and scalability. We are planning on using Zend Framework for this project but this is all that I'm sure off at this point. I don't think a classic approch like Zend Framework (PHP) + MySQL + Memcache + jQuery (and I would throw Doctrine 2 in there to) will fix result in a high-performance application. I was thinking on making this a RESTful application (with Zend Framework) + NGINX (or maybe MongoDB) + Memcache (or eAccelerator -- I understand this will create problems with scalability on multiple servers) + jQuery, a CDN for static content, a server for images and a scalable server for the requests and the rest. My questions are: - What do you think about my approch? - What solutions would you recommand in terms of servers approch (MySQL, NGINX, MongoDB or pgsql) for a scalable application expected to have a lot of traffic using PHP?...I would be interested in your approch. Note: I'm a Zend Framework developer and don't have to much experience with the servers part (to determin what would be best solution for my scalable application)

  Read the article

• solution for an offline server

  - by dashmug

  I'm trying to setup a development server at work that will ideally be able to test drive a couple of projects in PHP, Rails, or Django (not always running at the same time). I develop the apps locally on a Mac and then I'll put the projects up on this server for testing with my actual users (non-techies) before deploying to a production server. My problem is that we have a very poor internet connection (almost negligible) at work and doing the usual apt-get/yum/ports (make, clean, install) processes for setting up servers always get their packages from online repositories somewhere. I know I could probably download the source and then compile them myself but that's going to be too much of a hassle for me. I'm thinking about two solutions: Plan A: Run a server VM on my Mac and then use this VM as the source repository for the offline server. I've read about Ubuntu's apt-proxy and it seems to be good enough though I haven't tried it yet. I'm not sure if this is possible but can I simply do apt-get install nginx --downloadonly so that the package and its dependencies will be downloaded into my VM and my server can use the VM as the source repo for apt-get? Plan B: Run a server VM on my Mac (which I can setup/update easily when I'm home) and then clone the VM to the offline development server. Maybe I should simply make the server a VM host so I can simply copy the VM over. I think this is okay for the first-time setup but subsequent updates will take too long (cloning the VM image). If I was working on Windows, I imagine it'd be easier because most services have an installer file that I can download and then run at the server. If you could suggest another way, it would be much appreciated. Update: From Michael Hampton's answer, I found a possible solution which is apt-cacher. I also found this page on Ubuntu's website. I wonder if there is a better tool than this one.

  Read the article

• GIT and Django Projects

  - by Garfonzo

  I have two servers, a Dev server and a Production server. The Production server runs a live Django site, while the Dev server has a copy of the Django project. I use the Dev server to work on the Django site, make improvements, fix bugs, etc. Once I am satisfied with how the Dev version is working, I move the whole Django directory from the Dev server and replace the same directory on the Production server. The two servers are not on the same LAN so the process is not straight forward. There are a few issues with this that I am having so far. Moving the whole directory is laborious and time consuming If I only change a few files, it is even move tedious to replace a few files than the whole directory since the project is getting fairly large and I worry that I'll miss something I often run into permission issues after I've moved things It's super inefficient, and, due to lack of time, I haven't bothered figuring out a new method. Now it's just getting out of hand and i need to address the situation. I am thinking I need to move to a GIT repository for this process. But my question is how would I set this all up? Do I host the repository on the Production server, pull from the Dev server, do work, then commit? Then I would pull from the Production server (same server the repo is hosted on) to run the current working version? Do I host the repo on the Dev Server, pulling from the same server to do work on the repo, then pull a working version onto the Production server? Should I be hosting the repo on a different server than the Production server and the Dev server (a third server)? Are there any special considerations with Django and repos that I need to worry about? Thanks for the help :)

  Read the article

• Sed: Deleting all content matching a pattern

  - by Svish

  I have some plist files on mac os x that I would like to shrink. They have a lot of <dict> with <key> and values. One of these keys is a thumbnail which has a <data> value with base64 encoded binary (I think). I would like to remove this key and value. I was thinking this could maybe be done by sed, but I don't really know how to use it and it seems like sed only works on a line-by-line basis? Either way I was hoping someone could help me out. In the file I would like to delete everything that matches the following pattern or something close to that: <key>Thumbnail<\/key>[^<]*<\/data> In the file it looks like this: // Other keys and values <key>Thumbnail</key> <data> TU0AKgAAOEi25Pqx3/ip2fak0vOdzPCVxu2RweuPv+mLu+mIt+aGtuaEtOSB ... dCBBcHBsZSBDb21wdXRlciwgSW5jLiwgMjAwNQAAAAA= </data> // Other keys and values Anyone know how I could do this? Also, if there are any better tools that I can use in the terminal to do this, I would like to know about that as well :)

  Read the article

• HAProxy appsession vs cookie precedence

  - by user1139473

  I am trying to find the best solution for balancing and keeping persistence on our application behind HAProxy. Here is our basic configuration: https://gist.github.com/endzyme/1804046b23c37beba520 After playing around with taking members down and up and also reloading the haproxy (with -sf) I have noticed that appsession isn't 100% effective, it would appear that sometimes it doesn't always 'request-learn'. I also tried to add a cookie JSESSION prefix to balance in case request-learn didn't take. Unfortunately it would present scenarios where the prefix would list svr2 but it was balanced to a different server. I am assuming it's because the appsession table takes first then sticks on that before using the cookie parameter. I have not tested with using cookie as an inserted option (not prefix on existing cookie) but I am thinking it would yield similar results. My question is: Which one is checked first, appsession or cookie, and is it an immediate catch after it reads the first one, or a fall through? Also as a follow up - is it not recommended to use both in the same backend? Cookie as I understand takes less memory resources, is agnostic to reloads and has way better reliability of persistence. Appsession I assume takes less cpu resource, since it's reading not writing. (Bonus Question: is there a way to inspect appsession/cookie table map? socket show table doesn't show anything except stick-tables) Many thanks in advance, -Nick

  Read the article

• Mac Outlook showing all links in smart quotes?

  - by user2727128

  I was given the task of fixing my friend's email today and really don't know what the problem is. When an email is sent from his laptop (Mac) from Outlook the email address link in the signature shows exactly like this: [email protected]<mailto:[email protected]>. Additionally the website link displays like this: www.website.com<http://www.website.com>. And lastly, the image comes through as cid:randomstringofnumbers. When I sent him an email and he sent one back it converted my signature to same weird formatting. Plus, even in the header where it shows our emails, they are displaying the same way: [email protected]<mailto:[email protected]>. And the weirdest thing is that this problem seems to be "compounding". So when I scroll down to the last, most recent email in the thread I see this www.website.com<http://www.website.com> next email shows this: www.website.com<http://www.website.com><http://www.website.com> and the next this: www.website.com<http://www.website.com><http://www.website.com><http://www.website.com> This is happening to the emails too, everywhere. I'm thinking this might be something to do with smart quotes and the auto formatting but I'm not sure. Could this be the problem? And if so how do I fix it?

  Read the article

• Email Proxy Ideas

  - by jtnire

  Hi Everyone, I wish to host some managed email servers for some customers. Each customer will have their own email server which will be an all-in-one virtual machine running postfix, dovecot and some webmail suite. Even though each customer will have their own server, I do not wish to give each email server it's own public facing IP. I wish to avail the use of proxy servers so all customers use the same public IP. As for the "smtp-in" from the public internet, this isn't a problem as I can set up many mx servers (using postfix) which will store-and-forward the mail to the correct server (using transport maps). As for the IMAP access from the customer, I was thinking of using perdition which is an IMAP proxy - I believe that this will suit my needs. I am confused however on what to use for the "smtp-out" proxy. The customers will have to authenticate with their receptive email server, however they will have to go via a proxy of some sort as they won't have direct access to their server instance. It probably can't be a store-and-forward proxy either. Does anyone have any idea on what I could use here? Many Thanks

  Read the article

• Audit file removal (auditctl)

  - by user1513039

  For some reason, some script or program is removing a pid file for the service on the linux server (centos5.4 / 2.6.18-308.4.1.el5xen). I suspect a faulty cron script, but manual investigation did not lead me to it. And i still want to track it down. Have been using auditctl rule: auditctl -w /var/run/some_service.pid -p w Which helped me to see something, but not quite exactly what i wanted: type=PATH msg=audit(11/12/2013 09:07:43.199:432577) : item=1 name=/var/run/some_service.pid inode=12419227 dev=fd:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=SYSCALL msg=audit(11/12/2013 09:07:43.199:432577) : arch=x86_64 syscall=unlink success=yes exit=0 a0=7fff7dd46dd0 a1=1 a2=2 a3=127feb90 items=2 ppid=3454 pid=6227 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=pts0 ses=38138 comm=rm exe=/bin/rm key=(null) Problem here is that i see ppid of the script that removed the file, but at the analysis time the (p)pids are already invalid as probably scripts/programs have been shutdown. Imagine a cron script deleting the file. So i need some way to expand/add audit rule(s) to be able to trace the parents of the /bin/rm at the time of removal. I have been thinking to add some rule to monitor all process creation, something like: auditctl -a task,always But this happen to be very resource intensive. So i need help or advice how to combine these rules, or how to expand any of the rules to help track the script/program. Thanks.

  Read the article

• Upgrade or replace?

  - by Felix

  My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

  Read the article

• Diff bios - corrupt video driver

  - by sfonck

  Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

  Read the article

< Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >