Search Results

Search found 54073 results on 2163 pages for 'device instance id'.

Page 271/2163 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

• Usb WiFi dongle pluggin in doesnt create wlan0 interface

  - by zuba

  I use D-Link DWA-110 WiFi usb dongle. It used to be working well, but after some config changes I broke something and now when I plug the dongle in I see it in lsusb output, but wlan0 isn't created and the led on the dongle doesn't light. What to check out? ~ > uname -a Linux Distress 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 17:31:43 UTC 2013 i686 i686 i386 GNU/Linux dmesg shows [ 667.824095] usb 1-8: new high-speed USB device number 6 using ehci-pci [ 668.117996] usb 1-8: New USB device found, idVendor=07d1, idProduct=3c07 [ 668.118007] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 668.118015] usb 1-8: Product: 802.11 bg WLAN [ 668.118021] usb 1-8: Manufacturer: Ralink

  Read the article

• Can't connect to Wired Network after installing 12.04

  - by ezz9

  I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

  Read the article

• Poor mobile performance when running from Eclipse

  - by Yajirobe_LOL

  So after weeks of thinking my rendering code was bad, I accidentally discovered the following: Running my game on a Nexus S From Eclipse (Debug as - Android application): 12fps From the device while still attached to USB (getting log info in Eclipse still): 24fps From the device while not attached via USB: 56fps I was wondering if anyone else has issues like this? I mean, the problem really isn't a problem since the final release build will likely have good performance, but for the time being I don't want to have to keep (un)plugging my device in and out when testing code all day long. Is there some remedy for this or does anyone have any input/advice? Thanks.

  Read the article

• Operating systems -- using minimum number of semaphores

  - by stackuser

  The three cooperating processes all read data from the same input device. Each process, when it gets the input device, must read two consecutive data. I want to use mutual exclusion to do this. The declaration and initialization that I think would work here are: semaphore s=1 sa1 = 0, sa2 = 0, sb1 = 0, sb2 = 0, sc1 = 0, sc2 = 0 I'd like to use semaphores to synchronize the following processes: P1: P2: P3: input(a1,a2) input (b1,b2) input(c1,c2) Y=a1+c1 W=b2+c2 Z=a2+b1 Print (X) X=Z-Y+W I'm wondering how to use the minimum number of semaphores to solve this. Diagram of cooperating Processes and one input device: It seems like P1 and P2 would start something like: wait(s) input (a1/b1, a2/b2) signal(s)

  Read the article

• Problems with NVIDIA drivers: White screen with full(or almost full)screen apps

  - by Felipe

  My NVIDIA graphic card is a 7050/610i. My problem is that after upgrading to the last NVIDIA drivers when I use fullscreen apps (or almost fullscreen) the windows goes white. My xorg.conf file: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 270.29 ([email protected]) Wed Feb 23 16:38:34 PST 2011 Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" Option "AddARGBGLXVisuals" "True" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" # generated from default EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Device" Identifier "Device0" VendorName "NVIDIA Corporation" Driver "nvidia" Option "NoLogo" "True" EndSection Any idea on how to solve this? <--Sorry for bad english, ask for more info--

  Read the article

• Can't mount cds after failed Brasero burn

  - by Allan

  Brasero failed to burn a disk recently, and now I can't access CD-ROMS. Even CD-Rs are not not showing. Using Ubuntu 11.10 on a Dell D510 Lattitude laptop. allan@allan-Latitude-D510:~$ cdrecord -checkdrive Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/cdrw Using /dev/cdrom of unknown capabilities Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identification : 'DVD+-RW TS-L532B' Revision : 'DE04' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R My CD drive is now useless, and any help on getting it to read/burn would be appreciated.

  Read the article

• Noting happens when I connect my Iphone 3G to my laptop

  - by Allwar

  Hi, how do i connect my iphone to my laptop (ubuntu 10.04) so that i can sync music and be able to look at it as a usb stick? (this is what I want to do but there is a problem.) When i connect it to my laptop nothing happens, it doesn't show up as an ikon or as a mass storage device. My Iphone runs 4.2.1 it's an Iphone 3G and it's not jailbroken for the moment, is that a problem? My laptop is an Asus 1201n ubuntu 10.04 (64-bits) Bus 002 Device 005: ID 05ac:1292 Apple, Inc. iPhone 3G I connected my Ipod Video (30 gb) and that one doesn't appear as well So I'm kind of stuck now. The problem probably lies in the system, because the usb port is working. Bus 002 Device 006: ID 05ac:1209 Apple, Inc. iPod Video

  Read the article

• Enabling Multi-touch features of the Apple Magic Mouse on Ubuntu 12.04

  - by Martin

  I want to write a simple app that uses Apple's Magic Trackpad, nothing special, just so that it recognizes atleast one gesture. The thing is, Ubuntu itself doesnt really recognize this device. I'm using Ubuntu 12.04 and by default the device works with 1 finger, but without tap-click or doubletap, 3 fingers move the window and 3 finger spread makes it fullscreen. I managed to enable 2 finger scrolling with "xinput set-prop 8 'Two-Finger Scrolling' 1 1", but thats about it. No other gestures work, ginn doesnt start, giesview detects the device but doesnt respond to any of the gestures, and touchegg doesnt start either. I tried example apps from qt that come with ubuntu but they dont work. So... what do i do? i tried using qt but all i get from the app is "Got touch without getting TouchBegin for id XX" what else can i use to get my app to work with multitouch devices?

  Read the article

• Grid Layouts in ADF Faces using Trinidad

  - by frank.nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} ADF Faces does provide a data table component but none to define grid layouts. Grids are common in web design and developers often try HTML table markup wrapped in an f:verbatim tag or directly added the page to build a desired layout. Usually these attempts fail, showing unpredictable results, However, ADF Faces does not provide a table layout component, but Apache MyFaces Trinidad does. The Trinidad trh:tableLayout component is a thin wrapper around the HTML table element and contains a series of row layout elements, trh:rowLayout. Each trh:rowLayout component may contain one or many trh:cellLayout components to format cells content. <trh:tableLayout id="tl1" halign="left">   <trh:rowLayout id="rl1" valign="top" halign="left">     <trh:cellFormat id="cf1" width="100" header="true">        <af:outputLabel value="Label 1" id="ol1"/>     </trh:cellFormat>     <trh:cellFormat id="cf2" header="true"                               width="300">        <af:outputLabel value="Label 2" id="outputLabel1"/>        </trh:cellFormat>      </trh:rowLayout>      <trh:rowLayout id="rowLayout1" valign="top" halign="left">        <trh:cellFormat id="cellFormat1" width="100" header="false">           <af:outputLabel value="Label 3" id="outputLabel2"/>        </trh:cellFormat>     </trh:rowLayout>        ... </trh:tableLayout> To add the Trinidad tag library to your ADF Faces projects ... Open the Component Palette and right mouse click into it Choose "Edit Tag Libraries" and select the Trinidad components. Move them to the "Selected Libraries" section and Ok the dialog.The first time you drag a Trinidad component to a page, the web.xml file is updated with the required filters Note: The Trinidad tags don't participate in the ADF Faces RC geometry management. However, they are JSF components that are part of the JSF request lifecycle. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} ADF Faces RC components work well with Trinidad layout components that don't use PPR. The PPR implementation of Trinidad is different from the one in ADF Faces. However, when you mix ADF Faces components with Trinidad components, avoid Trinidad components that have integrated PPR behavior. Only use passive Trinidad components.See:http://myfaces.apache.org/trinidad/trinidad-api/tagdoc/trh_tableLayout.htmlhttp://myfaces.apache.org/trinidad/trinidad-api/tagdoc/trh_rowLayout.htmlhttp://myfaces.apache.org/trinidad/trinidad-api/tagdoc/trh_cellFormat.html .

  Read the article

• Android Live Testing

  - by Matthew Dockerty

  I am making a game for android and in it I am using sensors which are not available in the emulator. At the moment I am connecting my device and transferring the apk, then installing to test but that is a pain to do, and I have gotten to the stage where I need to start logging values for debugging. I have gone into the run configs of my app and set it to prompt me to pick a device, but my device is never in the list when it is connected to my PC and I try to run it. How am I supposed to set it up to work properly? Thanks for the help.

  Read the article

• No sound from internal speaker but headphones OK

  - by Aris Boch

  The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Sound is not working correctly on Ubuntu 12.04

  - by Jeggy

  I know this is my own fault. But what i did was this first i wrote this command 'sudo apt-get remove pulseaudio' and then i wrote again 'sudo apt-get install pulseaudio' and now the sound doesn't work properly And the Indicator doesn't work either, it's just grayed out. The shortcuts are not working either. Alsamixer is working, and this is the only way i change change the volume at the moment: jeggy@jeggy-XPS:~$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf1c00000 irq 52 jeggy@jeggy-XPS:~$ aplay -l **** List of PLAYBACK Hardware Devices **** ALSA lib conf.c:1686:(snd_config_load1) _toplevel_:11:0:Unexpected end of file ALSA lib conf.c:3406:(config_file_open) /etc/asound.conf may be old or corrupted: consider to remove or fix it /usr/bin/pulseaudio: error while loading shared libraries: libpulsecommon-1.1.so: cannot open shared object file: No such file or directory card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 VLC sound is not working, am getting this error:

  Read the article

• CD/DVD drive not mounted when inserted with Disc of any kind

  - by Cisco Sán

  I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

  Read the article

• How can i get latency when using Game Center?

  - by Freddy

  I'm pretty new to network programming. Basically I'm using game center for making a relatively simple iPhone game using Game-center p2p. However i'm now working on a algorithm to improve the multiplayer performance. But, I need to know how long it took for a package to travel from one device to the another device (latency) for the algorithm to work good. As for now, I have solved the problem by sending a double with time interval since 1970 in the package and then I compare it with the time at the other device. However I have heard that the NSDate methods is connected to the internet, which also will cause latency so the time interval would not be perfectly correct. What is the ideal way to check for how long it take for a package to be sent?

  Read the article

• Switch from encrypted partition to unencrypted (Error: cryptsetup: evms_activate is not available)

  - by Chris Lercher

  I initially installed Ubuntu 11.04 with an encrypted file system (from the alternate install CD: Guided Partitioning, LVM encrypted). Now I wanted to change this setup to have my root file system on an unencrypted partition. I had the following setup before: /dev/mapper/my-root on / type ext4 (rw,noatime,errors=remount-ro,commit=0,commit=0) /dev/sda1 on /boot type ext2 (rw,noatime) I backed up /, reformatted /dev/sda5 (which had contained the encrypted LVM device) to an ext3 partition, and restored / to that partition. I edited /etc/fstab, removed the line /dev/mapper/my-root / ..., and added the line: /dev/sda5 / ext3 noatime,rw,errors=remount-ro,commit=0 0 1 I edited /etc/crypttab, and commented out the single entry. On reboot, I get the grub screen as usual, but then I get the message cryptsetup:evms_activate is not available, waiting for encrypted source device. I tried reinstalling Grub2 using a LiveCD with the ChRoot method, but that didn't make any difference. Why is Ubuntu still searching for an encrypted device?

  Read the article

• Shortcut to switch between Analog Stereo output & HDMI audio output

  - by iJeeves

  To switch to HDMI audio output (of monitor) and back to normal audio output from system audio jack (for headphones, as my monitor doesn't have audio out), I find myself opening up sound preferences and selecting the right channel everytime. Is there any way I can create a toggle button in the panel or assign some shortcut key to toggle since I do the switching so often. :aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 7: STAC92xx Digital [STAC92xx Digital] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• How can I optimise ext4 for reliability?

  - by amin

  As ext4 was introduced as more reliable than ext3 with block journals, is there any chance to suppose it 100% reliable? What if enabling block journaling on it, which is disabled by default? As friend's guide to explain my case in more detail: I have an embedded linux device, after installation keyboard and monitor is detached and it works standalone. My duty is to make sure it has reliable file-system so with errors there is no way for manual correct faults on device. I can't force my customer to use a ups with each device to ensure no fault by power-failure. What more can ext4 offer me besides block journaling? Thanks in advance.

  Read the article

• How can I force the (re)discovery of PulseAudio network sound devices?

  - by Christian

  I'm using the PulseAudio feature of network sound devices (not Multicast/RTP) to play sound from my netbook on the audio equipment connected to the HTPC when at home. This creates a virtual sound device that I can then use instead of the physical built-in one. Most of the time this works just fine. Sometimes however, the virtual sound device just doesn't appear. Disconnecting from and reconnecting to the network helps sometimes but not always and it's annoying and potentially bad for existing TCP connections. So my question basically is: Is there some way to tell PulseAudio "Hey, just look again if you really can't find a network sound device."? Edit: Unloading and reloading the module-zeroconf-discover with pacmd does not help either and it doesn't appear to be an avahi problem per se since avahi-browse -t --all | grep PulseAudio shows lots of right-looking stuff, even when the devices aren't listed in pavucontrol or pacmd list-sinks. Edit 2: I'm using Ubuntu 12.04 on both boxes for all the difference it might make.

  Read the article

• Where are the LXDE sound preferences?

  - by Uri Herrera

  I'm confused,how can I change the sound output in LXDE? There's not even a single option anywhere unlike other environments. I've tried doing anything with alsamixerbut still nothing, the output device is the HDMI audio of a Radeon HD card. Edit: As it Turns out i was able to change the ouput device, but i had to use Gnome for that and its Gnome Sound applet, that is log out and log in in Gnome change the device, log out and log back in LXDE. Now the question becomes Why can't i do this in LXDE?

  Read the article

• Make An Old Android Feel Like New: How To Make Gingerbread Feel Like Jelly Bean

  - by Chris Hoffman

  Android has taken huge strides since Android 2.3 Gingerbread, but many devices are still using it. If you can’t upgrade your old device, there are ways to make it feel more modern. These apps won’t actually upgrade your Android device to Jelly Bean, but they’ll replace some of the more outdated parts of Gingerbread and make your device feel more like Jelly Bean and Ice Cream Sandwich. the latest versions of Android. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• How do I install my Wacom Intuos 2 serial tablet?

  - by Gizmoatwork

  I've seen many topics on the subjects but they are too complicated for me. I'm not confident in compiling stuff. Is there some headache-free way to make it work under Ubuntu? Where do I start? Edit : It doesn't seem to work. looking at device '/devices/pnp0/00:08/tty/ttyS0': KERNEL=="ttyS0" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/pnp0/00:08': KERNELS=="00:08" SUBSYSTEMS=="pnp" DRIVERS=="serial" ATTRS{id}=="PNP0501" looking at parent device '/devices/pnp0': KERNELS=="pnp0" SUBSYSTEMS=="" DRIVERS=="" ACTION=="add|change", SUBSYSTEMS=="pnp", ATTRS{id}=="PNP0501", ENV{ID_INPUT}="1", ENV{ID_INPUT_TABLET}="1" ATTRS{id}==PNP0501, : commande introuvable I am a bit confused. Am I right to type it in the terminal?

  Read the article

• VPS Server OS differences

  - by silvercover

  I have two VPS servers. one of them is running Linux and the other is Windows one. I've uploaded same file to their public_html folders and could see them in my browser via static IP address of each one like http://178.63.165.178/getorder/file.xml and http://178.63.165.178/getorder/file.xml. On the other side there is a device called SMSPrinter that configured to read those XML files using GPRS and need static IP address to reach destination server. unfortunately this device can only read file from windows server and could not reach the file on Linux server. There is no note in this device manual suggesting Windows server or specific OS! I've also set file permission on Linux server to 777 to have no limitation. what could be the cause of our problem? Thanks.

  Read the article

• Migrating Virtual Iron guest to Oracle VM 3.x

  - by scoter

  As stated on the official site, Oracle in 2009, acquired a provider of server virtualization management software named Virtual Iron; you can find all the acquisition details at this link. Into the FAQ on the official site you can also view that, for the future, Oracle plans to fully integrate Virtual Iron technology into Oracle VM products, and any enhancements will be delivered as a part of the combined solution; this is what is going on with Oracle VM 3.x. So, customers started asking us to migrate Virtual Iron guests to Oracle VM. IMPORTANT: This procedure needs a dedicated OVM-Server with no-guests running on top; be careful while execute this procedure on production environments. In these little steps you will find how-to migrate, as fast as possible, your guests between VI ( Virtual Iron ) and Oracle VM; keep in mind that OracleVM has a built-in P2V utility ( Official Documentation )  that you can use to migrate guests between VI and Oracle VM. Concepts: VI repositories.  On VI we have the same "repository" concept as in Oracle VM; the difference between these two products is that VI use a raw-lun as repository ( instead of using ocfs2 and its capabilities, like ref-links ). The VI "raw-lun" repository, with a pure operating-system perspective, may be presented as in this picture: Infact on this "raw-lun" VI create an LVM2 volume-group. The VI "raw-lun" repository, with an hypervisor perspective, may be presented as in this picture: So, the relationships are: LVM2-Volume-Group <-> VI Repository LVM2-Logical-Volume <-> VI guest virtual-disk The first step is to present the VI repository ( raw-lun ) to your dedicated OVM-Server. Prepare dedicated OVM-Server On the OVM-Server ( OVS ) you need to discover new lun and, after that, discover volume-group and logical-volumes containted in VI repository; due to default OVS configuration you need to edit lvm2 configuration file: /etc/lvm/lvm.conf     # By default for OVS we restrict every block device:     # filter = [ "r/.*/" ] and comment the line starting with "filter" as above. Now you have to discover the raw-lun presented and, next, activate volume-group and logical-volumes: #!/bin/bash for HOST in `ls /sys/class/scsi_host`;do echo '- - -' > /sys/class/scsi_host/$HOST/scan; done CPATH=`pwd` cd /dev for DEVICE in `ls sd[a-z] sd?[a-z]`;do echo '1' > /sys/block/$DEVICE/device/rescan; done cd $CPATH cd /dev/mapper for PARTITION in `ls *[a-z] *?[a-z]`;do partprobe /dev/mapper/$PARTITION; done cd $CPATH vgchange -a yAfter that you will see a new device:[root@ovs01 ~]# cd /dev/6000F4B00000000000210135bef64994[root@ovs01 6000F4B00000000000210135bef64994]# ls -l 6000F4B0000000000061013* lrwxrwxrwx 1 root root 77 Oct 29 10:50 6000F4B00000000000610135c3a0b8cb -> /dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb By your OVM-Manager create a guest server with the same definition as on VI:same core number as VI source guestsame memory as VI source guestsame number of disks as VI source guest ( you can create OVS virtual disk with a small size of 1GB because the "clone" will, eventually, extend the size of your new virtual disks )Summarizing:source-virtual-disk path ( VI ):/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cbdest-virtual-disk path ( OVS ):/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img ** ** = to identify your virtual disk you have verify its name under the "vm.cfg" file of your new guest.Clone VI virtual-disk to OVS virtual-diskdd if=/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb of=/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img Clean unsupported parameters and changes on OVS.1. Restore original /etc/lvm/lvm.conf    # By default for OVS we restrict every block device:     filter = [ "r/.*/" ]    and uncomment the line starting with "filter" as above.2. Force-stop lvm2-monitor service  # service lvm2-monitor force-stop 3. Restore original /etc/lvm directories ( archive, backup and cache )  # cd /etc/lvm  # rm -fr archive backup cache; mkdir archive backup cache4. Reboot OVSRefresh OVS repository and start your guest.By OracleVM Manager refresh your repository:By OracleVM Manager start your "migrated" guest: Comments and corrections are welcome.  Simon COTER 

  Read the article

• Mount and unmount errors when usb is connected in 12.10.

  - by Mysterio

  I just installed 12.10 and noticed some strange behaviour every time I connect a USB storage device. It reports I already have the device mounted by a different user but there is only one user account on this set up. Here is a picture of the dialogue: Also when I try to mount the inserted USB drive, I have to enter gain root privileges before the device will unmount successfully. Like this: . I can't copy/delete any file without root access either with the default file manager or third party file manager, Marlin. How do I resolve this rather frustrating experience? Thanks in advance.

  Read the article

• How is Sencha Touch performing on Android in practice ?

  - by Vidar Vestnes

  Hi I'm just about to start a project using Sencha Touch, and just done some minor testing on my HTC desire device. All tutorial videos at Vimeo seems to be using an iPhone emulator running on a Mac. Im not sure how fast this emulator is compared to a real iPhone device or even an real Android device, but from what i have experienced, it seems that my HTC desire is not performing that nicly as this emulator. All animations (sliding, fading, etc) seems abit laggy. You can easily notice that the FPS is much less than on the Vimeo videos. HTC desire is a relativly new and modern Android 2.2 phone, running with decent hardware, so im wondering if Sencha Touch is "ready" for the Android platform. Anybody with practical experience with Android and Sencha Touch ?

  Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >