Search Results

Search found 18132 results on 726 pages for 'connection timeout'.

Page 273/726 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

  • Ubuntu 11.10 doesn't detect Intel integrated graphics (i7-2670QM CPU)

    - by Telmo Marques
    The laptop I'm using is an MSI GT683DX-847PT that comes with an NVIDIA GeForce GTX570M discrete GPU, and an Intel Core i7-2670QM CPU. According to Intel's description of the Core i7-2670QM CPU, it has an HD Graphics 3000 integrated GPU. The problem is that the Intel integrated graphics GPU doesn't come up in lspci nor in lshw, only the NVIDIA GPU shows up. Here is the output of both commands: sudo lspci: http://pastebin.com/raw.php?i=9AZg8bJy sudo lshw: http://pastebin.com/raw.php?i=6cAMFQsY I was counting on having two GPU's to run CUDA programs on the discrete NVIDIA GPU, while X was handled by the integrated Intel GPU, to prevent kernel execution timeout. Why doesn't the Intel HD Graphics 3000 GPU show up? Any tests I could make to verify the presence of an integrated GPU?

    Read the article

  • ubuntu desktop installation problem, a lot of error messages

    - by veerendar
    Hi I am getting error messages while trying to install ubuntu 12.04 on my desktop(intel pentium D). and the error messages are: *checking battery state... [412.633532] end_request:I/O error .dev sr0, sector 1291684 [435.997503] SQUASHFS error: squashfs_readdata failed to readbloack 0x275fcda4 [435.9975xx] SQUASHFS error: unable to read fragment cache entry page [275fcda4] . . [524.000055] exception Emask 0x0 SAct 0x0SErr 0x0 action 0x6 frozen ata5.00 : cmd a0/00:00:00:08:00/00:00:00/00 tag0 pio 16392 in res 58 /00:02:00:08:00/00/a0 Emask 0xf(timeout) [524.000292] ata5.00 status : {DRDY DRQ} I was able to install on another pc(intel atom) but not on this pc(intel pentium D), Can any one help me in successful installation. Thanks!

    Read the article

  • B2B communication using IBM MQ

    - by Dheeraj Kumar M
    Oracle B2B 11g, provides the out-of-the box ability to connect to IBM MQ to exchange the message. This is support is provided via JMS offering of Oracle B2B. This is an addition to the stack of existing communication capabilities of B2B with trading partners. There are 2 ways of connecting to IBM MQ using B2B 1. Credential based connectivity 2. .bindings based connectivity As a pre-requisite to connect to IBM MQ, it is required to provide the following libraries in classpath: a. com.ibm.mqjms.jar b. dhbcore.jar c. com.ibm.mq.jar d. com.ibm.mq.jmqi.jar e. mqcontext.jar f. com.ibm.mq.pcf.jar g. com.ibm.mq.commonservices.jar h. com.ibm.mq.headers.jar i. fscontext.jar j. jms.jar Add the above jars into domain library directory and the directory usually located at $DOMAIN_DIR/lib. The jars located in this($DOMAIN_DIR/lib) directory will be picked up and added dynamically to the end of the server classpath at server startup. For eg. /user_projects/domains//lib/ Alternatively the above jar’s can also be added as part of the setDomainEnv.sh Credential based connectivity : Outbound: : Configure the trading partner delivery channel for using "Generic JMS" protocol Inbound: : Configure the internal delivery channel for using "Generic JMS" protocol with the following details: Parameter NameDescription Destination NameMQ Queue Name Connection FactoryMQ Queue Manager Name Destination Providerjava.naming.factory.initial=com.ibm.mq.jms.context.WMQInitialContextFactory;java.naming.provider.url=<host>:<QM Listen port>/<MQ Channel Name>; User NameMQ User Name passwordMQ password .bindings based connectivity As a pre-requisite, get/generate the .bindings file in MQServer. This can be done by MQ Administrator Set the following values in the respective delivery channel for outbound / inbound Parameter NameDescription Destination NameMQ Queue Name Connection FactoryMQ Queue Manager Name Destination Providerjava.naming.factory.initial=com.ibm.mq.jms.context.WMQInitialContextFactory;java.naming.provider.url=file:///<location of .bindings file>;

    Read the article

  • TightVNC (or any VNC) viewer windows scaling

    - by mr.b
    Hi, I am currently using TightVNC to connect to multiple remote hosts in LAN. I start 16 VNC viewers, set Scaling by: Auto (in connection options display), and then select all viewer windows and use Tile Horizontally, which covers my entire screen with VNC viewers. It all works sort of nice, except that desktop interaction is really slow when there are more then 4 VNC viewers. My question is, does VNC client (not just TightVNC, but any compatible client) support some kind of smart scaling option, so that client tells server something along the lines of: "Okay, I'm displaying your entire screen in a window size 300x225 px, so can you please start sending encoded images on that resolution?", at which point interactiveness of open connections dramatically increase, and when I decide to go full screen on some connection, client and server re-negotiate and server starts sending full resolution images again? Thanks!!

    Read the article

  • How do I set up a shared internet on a network using computer hooked up to a router

    - by Skadlig
    I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

    Read the article

  • Bumblebee : Module bbswitch could not be loaded

    - by StepTNT
    I've upgraded to 12.04 and I had to switch from Ironhide to the latest version of Bumblebee. Now, when I try to run bumblebeed, I get this error: FATAL: Module bbswitch not found. [ERROR]Module bbswitch could not be loaded (timeout?) [WARN]No switching method available. The dedicated card will always be on. I don't really need to use the secondary VGA on Kubuntu, so I would like to find a way to definitely shut the discrete GPU down and avoid wasting battery. I can't disable it from the BIOS because I use it on Windows. My card is an nvidia 540M.

    Read the article

  • How to dump remote database without mysqldump?

    - by deceze
    I want to dump the database on my remotely hosted site in regular intervals using a shell script. Unfortunately the server is locked down pretty tight, has no mysqldump installed, binary files can't be executed by normal users/in home directories (so I can't "install" it myself) and the database lives on a separate server, so I can't grab the files directly. The only thing I can do is log into the webserver via SSH and establish a connection to the database server using the mysql command line client. How can I dump the contents to a file a la mysqldump in SQL format? Bonus: If possible, how can I dump the contents directly to my end of the SSH connection?

    Read the article

  • Lan, vpn on Amazon EC2, how to?

    The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

    Read the article

  • Other Ideas to troubleshoot Cisco IPSec VPN on OSX?

    - by Tawm
    We have one user running OSX Snow Leopard who is having issues staying connected to our VPN running off of an ASA5510. His connection can die even as he's actively pushing traffic across it or if he's been idle for a period of time. Other users on Snow Leopard, Lion, XP, Vista, 7 and various linux flavors are able to stay connected for 24hrs+ without issue We've deleted and remade the connection in System Preferences Networking, ran killall racoon (kills any lingering connections) Below are the logs from the user's system.log from a connect/disconnect cycle: Oct 10 21:22:25 username racoon[8192]: Connecting. Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Oct 10 21:22:25 username racoon[8192]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 XAUTH: success. (XAUTH Status is OK). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 Config: retransmited. (Mode-Config retransmit). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (MODE-Config). Oct 10 21:22:29 username configd[14]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.0.100), current interface setting (name: utun0, family: 1001, address: 10.215.8.53, subnet: 255.0.0.0, destination: 10.215.8.53). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username configd[14]: network configuration changed. Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:29 username racoon[8192]: Connected. Oct 10 21:22:29 username configd[14]: SCNCController: Connected. Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:47 username login[8200]: USER_PROCESS: 8200 ttys003 Oct 10 21:22:48 username GrowlHelperApp[160]: Periodic CFURLCache Insert stats (iters: 17240) - Tx time:0.001749, # of Inserts: 1, # of bytes written: 304, Did shrink: NO, Size of cache-file: 26624, Num of Failures: 0 Oct 10 21:25:24 username login[7367]: DEAD_PROCESS: 7367 ttys002 Oct 10 21:25:31 username login[7907]: DEAD_PROCESS: 7907 ttys001 Oct 10 21:27:32 username configd[14]: SCNCController: Disconnecting. (Connection was up for, 303 seconds). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Oct 10 21:27:32 username racoon[8192]: Disconnecting. (Connection was up for, 302.766105 seconds). Oct 10 21:27:32 username configd[14]: network configuration changed. Oct 10 21:27:34 username login[8200]: DEAD_PROCESS: 8200 ttys003

    Read the article

  • VPN using Zywall

    - by Rune FS
    I've played around with a certificate based VPN (normally I don't do hardware) we've manged to setup the connection and the tunnel between the routers is working correctly. We now need the last step. There's no connection to the computers on the other end. What could we have forgotten? (we're testing with two standard configured Win7 machines) EDIT: Just to clarify the tunnel is working I can ping the router on the other end. I can't access the computers on the other side of that router and vice versa. (It's also possible to access the remotemangement console of the remote router on the LAN IP)

    Read the article

  • How do I get a Broadcom BCM4311 working?

    - by Fer1805
    I'm having serious problems installing the broadcom drivers for ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. Broadcom BCM4311 Wireless not working Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

    Read the article

  • Wireless network unavailable, no networks found after Windows update

    - by jacobsee
    Old Dell Inspiron 8200 laptop with Linksys Wireless G network adapter card (WPC54G v2). Wireless connection was working fine. Then I ran a bunch of windows updates, I think the last one was the recent .NET 3.5 service pack update. Now wireless networks won't connect. Using windows to manage wireless, no networks show up. I'm typing right now on another laptop where wireless is working fine. I've restarted router & Dell laptop several times. Tried to Repair wireless connection and refresh network list. Also restarted DHCP and WZC service, all to no avail. I then uninstalled .NET 3.5 SP (don't remember number) and .NET 3.0 SP2. I don't remember all the windows updates that I just ran because I haven't used this laptop in a while so had to catch up on some updates.

    Read the article

  • HTTP downloads slow - FTP of same file very fast - Windows 2003

    - by Paul Hinett
    I am having some issues with download speeds on my site via http, i am averaging around 70kbps downloading a file that is around 70mb. But if i connect to my server via FTP and download the same file on the same computer / connection i am averaging about 300+kbps. I know my server has alot of connections at any one time, probably around 400 connections. My server has a 1gbps connection to the internet so there is plenty of bandwidth available, as proven with the FTP. I have no throttling of any kind enabled in IIS. If interested there is a test file here you can download to check the speed: http://filesd.house-mixes.com/test.zip I am based in the UK and the server is in Washington, USA if that makes any difference. Paul

    Read the article

  • Port Forwarding a Specific Port (e.g. 22)

    - by Jerry Blair
    I'm still confused about establishing an SSH connection (port 22) between two computers on different internal networks. For example: I am on my computer with internal IP address IIP-1, connected to my router RT-1. There are 10 IIPs connected to RT-1. I want to establish an SSH connection to IIP-3 which is connected to router RT-2. There are 10 IIPs connected to RT-2. At any time, there can be multiple SSH connections between IIPs on RT-1 and RT-2. Since I only have port 22 available, I don't know which SSH session is talking between which IIPs. I looked at a couple of similar questions but am still unclear on the solution. Thanks much, Jerry

    Read the article

  • Is LiveDrive.com reliable?

    - by Marc
    I'm currently using DropBox (50GB account) which works fine, but at this moment I'm not impressed with its speed. I have a 60down/6up connection and only LiveDrive can use almost the full bandwidth of my connection. Dropbox often is very slow (avg. 100-500Kb/s compared to LD at 6MB/s). If I only look at the speed and storage costs then LD is much better, but I don't have enough experience with LD to be able to say something about reliability. Can anyone comment on this? Thx.

    Read the article

  • How to reconnect to Remote Session in a script?

    - by Lukasz
    Hello, I need to persist a Remote desktop connection across a reboot of a Terminal server. I'm thinking that it would be something like a scheduled task that would run periodically and check the running state of the session and restart it if it's down. BTW, I did check the "Reconnect..." checkbox on the advanced tab of the connection options, but it still goes down everytime we restart the terminal server. Does anyone have the script that would accomplish the above in a scheduled task, or perhaps another solution?

    Read the article

  • Cannot log in via SSH after uploading SSH key

    - by OrangeTux
    I just uploaded an SSH key to my server and now I can't login anymore... SSH is running on port 3333. puTTy: pageant failed to answer challenge Terminal give me this when trying: ssh -vvv "[email protected] -p 3333" OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.xxx.xxx -p 3333 [xxx.xxx.xxx.xxx] port 22. debug1: connect to address xxx.xxx.xxx.xxx port 22: Connection refused ssh: connect to host xxx.xxx.xxx.xxx -p 3333 port 22: Connection refused I followed this tutorial. How can I login again?

    Read the article

  • Can't change Hyper Terminal Hardware Settings

    - by Tim
    Anyone here any good with Hyperterminal? Am having a nightmare trying to use it at work to update our telephone extensions. The company who supply our PABX box have told me that XP does strange things to Hyperterminal and that I should use Win2k. Which I did with the same result. I have narrowed the problem dowwn to the Hardware Settings for the connection in Hyper Terminal. No matter what I set (and I need 7E1) it defaults back to 8N1. Has anyone seen this behaviour before and know of a simple way around it? (Apart from buying a more expensive commercial version of Hyper Terminal, as suggested by our support people). Edit: I should point out I have to connect via a phone line so a direct serial connection is not an option. Cheers Tim

    Read the article

  • ArchBeat Link-o-Rama for 11/18/2011

    - by Bob Rhubart
    IT executives taking lead role with both private and public cloud projects: survey | Joe McKendrick "The survey, conducted among members of the Independent Oracle Users Group, found that both private and public cloud adoption are up—30% of respondents report having limited-to-large-scale private clouds, up from 24% only a year ago. Another 25% are either piloting or considering private cloud projects. Public cloud services are also being adopted for their enterprises by more than one out of five respondents." - Joe McKendrick SOA all the Time; Architects in AZ; Clearing Info Integration Hurdles This week on the Architect Home Page on OTN. OIM 11g OID (LDAP) Groups Request-Based Provisioning with custom approval – Part I | Alex Lopez Iin part one of a two-part blog post, Alex Lopez illustrates "an implementation of a Custom Approval process and a Custom UI based on ADF to request entitlements for users which in turn will be converted to Group memberships in OID." ArchBeat Podcast Information Integration - Part 3/3 "Oracle Information Integration, Migration, and Consolidation" author Jason Williamson, co-author Tom Laszeski, and book contributor Marc Hebert talk about upcoming projects and about what they've learned in writing their book. InfoQ: Enterprise Shared Services and the Cloud | Ganesh Prasad As an industry, we have converged onto a standard three-layered service model (IaaS, PaaS, SaaS) to describe cloud computing, with each layer defined in terms of the operational control capabilities it offers. This is unlike enterprise shared services, which have unique characteristics around ownership, funding and operations, and they span SaaS and PaaS layers. Ganesh Prasad explores the differences. Stress Testing Oracle ADF BC Applications - Do Connection Pooling and TXN Disconnect Level Oracle ACE Director Andrejus Baranovskis describes "how jbo.doconnectionpooling = true and jbo.txn.disconnect_level = 1 properties affect ADF application performance." Exploring TCP throughput with DTrace | Alan Maguire "According to the theory," says Maguire, "when the number of unacknowledged bytes for the connection is less than the receive window of the peer, the path bandwidth is the limiting factor for throughput."

    Read the article

  • TP-LINK-8901 modem does not connect automatically; only works in bridged mode [closed]

    - by Arash
    Possible Duplicate: Cannot Connect To Internet In Automatic (pppoe) Mode Of Modem My TP-LINK-8901 modem does not connect to internet with "always on" (automatic) connection. I have to put it in bridge mode and make a connection in Windows to connect to internet. Also, there is no configuration problem. What I did: Reset modem Update firmware Is there any way to solve the problem myself, e.g. through hardware or software? I can't have it repaired because the warranty already expired.

    Read the article

  • Software center not opening

    - by kishore kumar
    $ software-center 2012-09-07 18:45:04,349 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/dbus/proxies.py', 410, '_introspect_error_handler')' 2012-09-07 18:45:04,349 - dbus.proxies - ERROR - Introspect error on :1.128:/com/ubuntu/Softwarecenter: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. 2012-09-07 18:45:29,406 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2012-09-07 18:45:29,409 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True 2012-09-07 18:45:29,822 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-09-07 18:45:29,973 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None. 2012-09-07 18:45:29,991 - softwarecenter.db.pkginfo_impl.aptcache - INFO - aptcache.open() Killed

    Read the article

  • Akka react vs receive

    - by Will I Am
    I am reading my way through Akka tutorials, but I'd like to get my feet wet with a real-life scenario. I'd like to write both a connectionless UDP server (an echo/ping-pong service) and a TCP server (also an echo service, but it keeps the connection open after it replies). My first question is, is this a good experimental use case for Akka, or am I better served with more common paradigms like IOCP? Would you do something like this with Akka in production? Although I understand conceptually the difference between react() and receive(), I struggle to choose one or the other for the two models. In the UDP model, there is no concept of who the sender is on the server, once the pong is sent, so should I use receive()? In the TCP model, the connection is maintained on the server after the pong, so should I use react()? If someone could give me some guidance, and maybe an opinion on how you'd design these two use cases, it would take me a long way. I have found a number of examples, but they didn't have explanations as to why they chose the paradigms they did.

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • help with internet

    - by Remus Rigo
    hi all I have 3 PC's at home (with Win XP, Win 7 & Win 7) and a router. I am always connected to the internet through the router (PPoE connection). My problem is that sometimes when I want to search or open a page, my browser tells me that the server cannot be reached, as if I don't have a connection to the internet. Other times it logs me out from messenger, but browsing still works. FTP download/upload also works. If i disable and enable the LAN then all works fine. Anyone got any idea besides re-installing OS? thanks

    Read the article

  • Network connectivity logs on OSX

    - by Stephen
    I'm trying to determine whether or not Macs store a log of network connectivity. Specifically, I'm trying to find out if one of my machines (Mac Tower, OSX 10.7.4, 2-2.26 GHz, 16 GB DDR3) lost connection to pinpoint an issue. This machine is on an external network where and the IT staff is not very helpful, so I'm trying to ensure that there were network issues rather than some other local issue on that particular machine. Can you pull network logs thru Console that show when a network connection was established and was disconnected?

    Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >